} Small footprint
} Worldwide support for design-in: antenna design,
software
} Easy access to NFC technology, benefiting from
NXP expertise and experience with major device
manufacturers
Target segments
Making it possible to create infrastructure devices
that enable a revolutionary ‘touch’ experience in the
computing, infrastructure, and business application
segments.
} E-government and banking applications
} Ease the pairing of Bluetooth, Wi-Fi or WUSB devices
} Exchange objects such as vCards, digital rights
} Read a user-carried token or device for authentication
before granting access to the device: logical access
control, remote or proximity payment
} Read a user-carried token or device to authenticate before
granting entry to a venue: physical access control
Extensive proximity connectivity
capabilities for USB-enabled devices
NXP Near Field Communication
(NFC) controller PN533
Key features
} Full peer-to-peer functionality
} Reader/ writer functionality compatible to ISO/IEC 14443
A&B, MIFARE, FeliCa and NFC Forum tag types (MIFARE
UltraLight, Topaz, FeliCa, MIFARE DESFire)
} Card emulation functionality when connected to secure
controller (P5CN072)
} Up to 10cm operating distance1)
} 80C51 core processor with embedded firmware
} USB host interface
} PN533 software is certified by Cetecom for eGovernment
and by FIME for banking application
} NFC Sec for USB wireless and BT enabler support
} PC/SC driver WHQL pre-certified
Key benefits
} Supports the most widely deployed contactless protocols
with a single state-of-the-art chip
} Relieves the device host from contactless protocol real-
time processing tasks and reduces device OS changes
} Device hosts connection flexibility thanks to the support
of multiple interfaces besides USB
1) depending on antenna design and device integration
NXP Semiconductors’ PN533 is a highly integrated transmission module for contactless
communication at 13.56 MHz including a microcontroller. It is specially designed to provide
USB-enabled devices with the most widely deployed contactless communication protocols.
Contactless terminal application
- Access control for building, transport gate
- Reader module for vending machine, kiosk
Key applications
Computing application
PC and peripheral
- On-line banking
- E-commerce
- E-government on-line access
- PC secure log-in
Home reader application
- On-line banking
- E-commerce
- E-government on-line access
Infrastructure (POS) application
- Contactless payment
- E-coupon management
brb285
Host Controller
PN533
EEPROM
(optional to store PID,
VID, RF config...)
USB
I2C
Optional
RF amplifier
brb286
Host Controller
PN533
EEPROM
(optional to store PID,
VID, RF config...)
USB
I2C
Optional
brb284
Host Controller
PN533
EEPROM
(optional to store PID,
VID, RF config...)
TDA8029
(SAM reader)
USB
I2C
Optional
Key technical data PN533
Contactless protocols
Peer-to-peer Full ISO 18092 (up to 424 Kbits/s)
Reader/writer ISO 14443 A&B (up to 848 Kbits/s), MIFARE, FeliCa, NFC Forum tags
Host interface USB 2.0 (full speed) Yes
Extensions
I2C master interface Available
Connection to external EEPROM Available
Connection to Contact Reader Available
Power characteristics
Supply voltage 2.5 V - 3.6 V
USB bus power supply 4.2 V - 5.5 V
Power down mode 12μA
Typical RF active current 60mA
Temperature range -25°C / +85°C
brb278
REGU
3.3 V
PCR
27 MHz OSC
+ FRACN PLL
44 K ROM
1.2 k bytes RAM
NFC
ANALOG
FRONT END
+
CLUART
SVDD
SWITCH
80C51 CPU
USB
DEVICE
I
2
C
MASTER
48 MHz
MATX
SUPPLY
SUPERVISOR
RSTPD
VBUS
VGND
RSTOUT DVDD GND
PVDD GPIOs P30 P35P33P32P31
IRQ
XTAL1
XTAL2
DELATT
NSS
MOSI
SVDD
SIGIN
SIGOUT
P34
TVDD
AVDD
RX
VMID
TX1
TGND
TX2
IO
II
SDA
SCL
Ordering information
Partnumber PN5331B3HN/C270
Sales
description
Package HVQFN40 (6mmx6mmx1,0mm)
Status Available
Ordering
information 12NC
9352 878 68518 MOQ=4000
9352 878 68551 MOQ=490
9352 878 68557 MOQ=2450
Block diagram
www.nxp.com
©2008 NXP B.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The
information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable
and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Date of release: November 2008
Document order number: 9397 750 16622
Printed in the Netherlands
How to order documentation, samples, design-in kit
}A list with technical NFC documentation is available for each
IC (http://www.nxp.com/nfc)
}NFC documentation can be requested by filling in the
request form:
http://www.nxp.com/acrobat_download/other/identification/
NFC_request_final.pdf
}The samples and design-in kits can be ordered:
- for NXP distributors via our portal: https://extranet.nxp.com
- for customers a list of distributors is available at
http://www.nxp.com/nfc
Design-in kit
To support your product development and to enable
easy access to NFC technology, NXP has prepared a
design-in kit with all the necessary hardware, software
and documentation:
}12NC: 9352 865 87699
}1 USB board
}1 USB dongle demoboard (reference design)
}Cables and power supply
}Possibility to have contactless smart cards
depending on export regulation restrictions
}Documentation: datasheet, user manual, application
note
}Drivers, source code and examples (Windows, Linux)
NXP can also provide a NFC Forum protocol stack
reference implementation.
Useful Links
NFC Forum specifications: http://www.nfc-forum.org/specs/
EMVco: http://www.emvco.com
MIFARE: http://www.mifare.net
CETECOM: http://www.cetecom.de
FIME: http://www.fime.com
MIFARE, FeliCa, Topaz are registered trademarks of NXP, Sony Corporation and Innovision Research and
Technology plc. respectively
