NXP Near Field Communication (NFC) controller PN533 Extensive proximity connectivity capabilities for USB-enabled devices NXP Semiconductors' PN533 is a highly integrated transmission module for contactless communication at 13.56 MHz including a microcontroller. It is specially designed to provide USB-enabled devices with the most widely deployed contactless communication protocols. Key features } Full peer-to-peer functionality } Reader/ writer functionality compatible to ISO/IEC 14443 A&B, MIFARE, FeliCa and NFC Forum tag types (MIFARE UltraLight, Topaz, FeliCa, MIFARE DESFire) } Card emulation functionality when connected to secure controller (P5CN072) } Up to 10cm operating distance1) } 80C51 core processor with embedded firmware } USB host interface } PN533 software is certified by Cetecom for eGovernment and by FIME for banking application } NFC Sec for USB wireless and BT enabler support } PC/SC driver WHQL pre-certified Key benefits } Supports the most widely deployed contactless protocols with a single state-of-the-art chip } Relieves the device host from contactless protocol realtime processing tasks and reduces device OS changes } Device hosts connection flexibility thanks to the support of multiple interfaces besides USB 1) depending on antenna design and device integration } Small footprint } Worldwide support for design-in: antenna design, software } Easy access to NFC technology, benefiting from NXP expertise and experience with major device manufacturers Target segments Making it possible to create infrastructure devices that enable a revolutionary `touch' experience in the computing, infrastructure, and business application segments. } E-government and banking applications } Ease the pairing of Bluetooth, Wi-Fi or WUSB devices } Exchange objects such as vCards, digital rights } Read a user-carried token or device for authentication before granting access to the device: logical access control, remote or proximity payment } Read a user-carried token or device to authenticate before granting entry to a venue: physical access control Key applications Computing application PC and peripheral - On-line banking - E-commerce - E-government on-line access - PC secure log-in Contactless terminal application - Access control for building, transport gate - Reader module for vending machine, kiosk Host Controller Home reader application - On-line banking - E-commerce - E-government on-line access USB I2C PN533 EEPROM (optional to store PID, VID, RF config...) Optional Host Controller USB brb286 I2C PN533 EEPROM (optional to store PID, VID, RF config...) TDA8029 (SAM reader) Optional brb284 Infrastructure (POS) application - Contactless payment - E-coupon management Host Controller USB I2C PN533 EEPROM (optional to store PID, VID, RF config...) Optional RF amplifier brb285 Key technical data PN533 Contactless protocols Host interface Extensions Peer-to-peer Full ISO 18092 (up to 424 Kbits/s) Reader/writer ISO 14443 A&B (up to 848 Kbits/s), MIFARE, FeliCa, NFC Forum tags USB 2.0 (full speed) Yes I2C master interface Available Connection to external EEPROM Available Power characteristics Connection to Contact Reader Available Supply voltage 2.5 V - 3.6 V USB bus power supply 4.2 V - 5.5 V Power down mode 12A Typical RF active current 60mA Temperature range -25C / +85C Ordering information Partnumber Sales description Ordering information PN5331B3HN/C270 Package HVQFN40 (6mmx6mmx1,0mm) Status Available 9352 878 68518 9352 878 68551 9352 878 68557 12NC MOQ=4000 MOQ=490 MOQ=2450 Block diagram RSTPD VBUS VGND XTAL1 XTAL2 RSTOUT DVDD SUPPLY SUPERVISOR REGU 3.3 V 27 MHz OSC + FRACN PLL PCR IRQ GND SVDD SVDD SWITCH SIGIN SIGOUT P34 48 MHz DELATT USB DEVICE NSS MOSI TVDD 80C51 CPU MATX IO II SDA I2C SCL MASTER PVDD GPIOs 44 K ROM 1.2 k bytes RAM P30 P31 P32 P33 P35 NFC ANALOG FRONT END + CLUART AVDD RX VMID TX1 TGND TX2 brb278 Design-in kit To support your product development and to enable easy access to NFC technology, NXP has prepared a design-in kit with all the necessary hardware, software and documentation: } 12NC: 9352 865 87699 } 1 USB board } 1 USB dongle demoboard (reference design) } Cables and power supply } Possibility to have contactless smart cards depending on export regulation restrictions } Documentation: datasheet, user manual, application note } Drivers, source code and examples (Windows, Linux) How to order documentation, samples, design-in kit } A list with technical NFC documentation is available for each IC (http://www.nxp.com/nfc) } NFC documentation can be requested by filling in the request form: http://www.nxp.com/acrobat_download/other/identification/ NFC_request_final.pdf } The samples and design-in kits can be ordered: - for NXP distributors via our portal: https://extranet.nxp.com - for customers a list of distributors is available at http://www.nxp.com/nfc NXP can also provide a NFC Forum protocol stack reference implementation. Useful Links NFC Forum specifications: http://www.nfc-forum.org/specs/ EMVco: http://www.emvco.com MIFARE: http://www.mifare.net CETECOM: http://www.cetecom.de FIME: http://www.fime.com MIFARE, FeliCa, Topaz are registered trademarks of NXP, Sony Corporation and Innovision Research and Technology plc. respectively www.nxp.com (c)2008 NXP B.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The Date of release: November 2008 information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable Document order number: 9397 750 16622 and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication Printed in the Netherlands thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.