Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A2
A
Quality & Innovation From The Product Group
DIP Product Matrix
DIP PATTERN
Row to Row Spacing .300" .400"
Pin Count 6 8 14 16 18 20 22 24 28 22 24
200C •••••••••
200SM ••••••••
300C •••••• • •
500 •••••• ••
700 •••••••• ••
800 ••••• • ••
800SM ••••• • ••
DS ••••••••••
MCK •••••••••••
Holtites
®
••••• ••
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A3
A
DIP PATTERN
.600" .900" Row to Row Spacing
24 28 32 36 40 42 48 52 32 50 52 64 Pin Count
• • • • • • 200C
• • • • • 200SM
••• •• 300
••••• 500
••••• 700
••••••• • 800
••••••• • 800SM
••••• DS
•••••••••••• MCK
•••••• Holtites
®
DIP Product Matrix
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A4
A
Quality & Innovation From The Product Group
200C Series
Stamped Single Beam Contact Closed Bottom DIP Sockets
FEATURES:
The Augat 200C Series single beam side wipe contact provides maximum
normal force and consistent mechanical performance in Augat's lowest
cost socket.
• Non-wicking, closed bottom design gives protection against flux and
solder contamination
• Protected open entry for easy insertion of IC's by hand or
by automatic insertion
• Anti-overstress design protects contacts, helps eliminate damage from
oversize leads and maintains consistent normal force
• High normal force results in gas tight connections
•
®
Recognized under the Component Program of Underwriters
Laboratories, Inc. File No. E111362
APPLICATION DIMENSIONS:
• PWB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• PWB Hole Size Range: .055" ± .002" (1,40 ± 0,05)
• IC Pin Dimension Range: .008" x .015" ( 0,20 x 0,38) through
.015" x .023" (0,38 x 0,58), .115" (2,92) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Contacts..........................Phosphor bronze or beryllium copper
Plating ............................Tin/lead
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition III, 15 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition G, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016, 50 cycles
Normal Force ................ 170 Grams (6.0 oz.) with .009" x .015"
(0,23 x 0,38) IC lead typ.
Contact Retention ..........340 Grams (12.0 oz.) minimum
Solderability .................. Passed MIL-STD-202, Method 208
Insertion Force .............. 169 Grams (6.0 oz.) average with a .013" x .020"
(0,33 x 0,51) dia. polished steel pin
Withdrawal Force ..........43 Grams (1.5 oz.) average with a .009" x .015"
(0,23 x 0,38) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms
Contact Rating .............. 2 Amps
Capacitance .....................5 pF per MIL-STD-202, Method 305
(Adjacent contacts max.)
Insulation Resistance .... 2 x 10
6
Megohms per MIL-STD-1344,
Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1
Temperature Cycling .... Passed MIL-STD-1344, Method 1003.1
Operation Temperature..Gold -55°C to +125°C
Tin -55°C to +105°C
Salt Spray ...................... Passed MIL-STD-1344, Method 1001.1
216-AG19DC
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A5
A
200C Series
Number of
Contacts
8
14
16
18
20
22
24
PART NUMBERS
A
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.100
(27,94)
1.200
(30,48)
C
.400
(10,16)
B
.300
(7,62)
.600
(15,24)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.100
(27,94)
Stamped Single Beam Contact Closed Bottom DIP Sockets
Number of
Contacts
24
28
28
32
40
42
48
A
1.200
(30,48)
1.400
(35,56)
1.400
(35,56)
1.600
(40,64)
2.000
(50,80)
2.100
(53,34)
2.400
(60,96)
C
.700
(17,78)
.400
(10,16)
.700
(17,78)
B
1.100
(27,94)
1.300
(33,02)
1.300
(33,02)
1.500
(38,10)
1.900
(48,26)
2.000
(50,80)
2.300
(58,42)
Part Number Position Contact Material
208-AG19DC 8 Phos. Bronze
208-AG39DC 8 Beryllium Copper
214-AG19DC 14 Phos. Bronze
214-AG39DC 14 Beryllium Copper
216-AG19DC 16 Phos. Bronze
216-AG39DC 16 Beryllium Copper
218-AG19DC 18 Phos. Bronze
218-AG39DC 18 Beryllium Copper
220-AG19DC 20 Phos. Bronze
220-AG39DC 20 Beryllium Copper
222-AG10DC 22 Phos. Bronze
222-AG30DC 22 Beryllium Copper
224-AG10DC 24 Phos. Bronze
224-AG30DC 24 Beryllium Copper
Centerline
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
Part Number Position Contact Material
224-AG19DC 24 Phos. Bronze
224-AG39DC 24 Beryllium Copper
228-AG10DC 28 Phos. Bronze
228-AG30DC 28 Beryllium Copper
228-AG19DC 28 Phos. Bronze
228-AG39DC 28 Beryllium Copper
232-AG19DC 32 Phos. Bronze
232-AG39DC 32 Beryllium Copper
236-AG19DC 36 Phos. Bronze
236-AG39DC 36 Beryllium Copper
242-AG10DC 42 Phos. Bronze
242-AG30DC 42 Beryllium Copper
248-AG10DC 48 Phos. Bronze
248-AG30DC 48 Beryllium Copper
Centerline
.600
(15,24)
.300
(7,62)
.600
(15,24))
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
STANDARD CONFIGURATIONS
Note: Part Numbers in this chart refer to a .125" PC Tail Pin
“A”
“B”
.100
(2,54)
90°
.021
(0,53)
P.C.Tail
Length
.196
(4,98)
Max.
Ø.055
(1,40)
Centerline
“B”
P.C.B. Hole Layout Tolerance ± .002 (0,05)
Centerline
“C”
Stand-off may be
present in some
insulators
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A6
A
Quality & Innovation From The Product Group
200SM Series
Surface Mount DIP Sockets
FEATURES:
Augat offers two styles of surface mount sockets: The stamped single beam
200SM Series and the precision machined 800SM Series. Both series
achieve compliancy to the board surface and are designed for high
temperatures typical of vapor phase and infrared reflow soldering.
• "L" bent lead design achieves high compliancy to board surface
• Single beam contact provides gas tight connection
• Enlarged vacuum pick and place surface area
APPLICATION DIMENSIONS:
• IC Pin Dimension Range: .008" x .015" ( 0,20 x 0,38) through
.015" x .020" (0,38 x 0,51), .115" (2,92) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Contacts..........................Phosphor bronze or beryllium copper
Plating ............................Tin/lead
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-202, Method 204
Durability ...................... Passed MIL-STD-1344, Method 2016,
50 cycles min.
Normal Force ................ 320 Grams (11.3 oz.) with .008" x .015"
(0,20 x 0,38) IC lead (typ.)
Contact Retention
in Plastic ................... 400 Grams (14.1 oz.) minimum
Solderability .................. Passed MIL-STD-202, Method 208
Insertion Force .............. 305 Grams (10.8 oz.) average with a .013"x .020"
(0,33 x 0,51) dia. polished steel pin
Withdrawal Force ..........113 Grams (10.8 oz.) average with a .008" x .015"
(0,20 x 0,38) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 2 Amps
Capacitance .....................2 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 3 x 10
4
Megohms per MIL-STD-1344,
Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1,
Operation Temperature..Gold -55°C to +125°C
Tin -55°C to +105°C
Salt Spray ...................... Passed MIL-STD-1344, Method 1001.1
228-AG19SM
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A7
A
200SM Series
STANDARD CONFIGURATIONS
Surface Mount DIP Sockets
Number of
Contacts
28
32
A
1.400
(35,56)
1.600
(40,64)
B
1.300
(33,02)
1.500
(38,10)
C
.700
(17,78)
D
.715
(18,16)
E
.660
(16,76)
89-93°
Recommended Pad Footprint
.100
(2,54)
.060
(1,52)
.120
(3,05)
“B”
“D”
Max. Centerline
Polarization
Notch
.100
(2,54)
Typ.
.023
(0,58)
“E”
.060
(1,52)
.006
(0,15)
.197 - .217
(5,00 - 5,51)
“A”
“B”
“C”
Max.
PART NUMBERS
Part Number Position Contact Material
228-AG19DC 28 Phosphor Bronze
228-AG39DC 28 Beryllium Copper
232-AG19DC 32 Phosphor Bronze
232-AG39DC 32 Beryllium Copper
Centerline
.600
(15,24)
.600
(15,24)
Consult factory for 24 position, .600 centerline availability
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A8
A
Quality & Innovation From The Product Group
300C Series
Stamped Dual Wipe Contact DIP Sockets
FEATURES:
The Augat 300C Series dual wipe contact adds a new family of
product to Augat's low cost DIP socket line.
• Closed bottom prevents solder wicking
• Standoff's facilitate board cleaning
• Low profile design
•
®
Recognized under the Component Program of Underwriters
Laboratories, Inc. File No. E111362
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34))
• PCB Hole Size Range: .035" ± .003" (0,89 ± 0,08) standard tail
• IC Pin Dimension Range: .008" x .015" ( 0,20 x 0,38) through
.013" x .020" (0,33 x 0,51), .100" (2,54) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Contacts..........................Phosphor bronze
Plating ............................Tin/lead
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition III, 15 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition G, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force ................ 170 Grams (6.0 oz.) with .009" x .015"
(0,23 x 0,38) IC lead typ.
Contact Retention ..........340 Grams (12.0 oz.) minimum
Solderability .................. Passed MIL-STD-202, Method 208
Insertion Force .............. 169 Grams (6.0 oz.) average with a .013"x .020"
(0,33 x 0,51) dia. polished steel pin
Withdrawal Force ..........43 Grams (1.5 oz.) average with a .009" x .015"
(0,23 x 0,38) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms
Contact Rating .............. 2 Amps
Capacitance .....................5 pF per MIL-STD-202, Method 305
(Adjacent contacts max.)
Insulation Resistance .... 5,000 Megohms @ 500 VDC per MIL-STD-1344,
Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1
Temperature Cycling .... Passed MIL-STD-1344, Method 1003.1
Operation Temperature..Gold -55°C to +125°C
Tin -55°C to +105°C
Salt Spray ...................... Passed MIL-STD-1344, Method 1001.1
328-AG19DC
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A9
A
B*
.300 ± .005
(7,62 ± 0,13)
D
1.100
(27,94)
1.100
(27,94)
1.300
(33,02)
1.300
(33,02)
1.500
(38,10)
1.500
(38,10)
1.900
(48,26)
1.900
(48,26)
2.000
(50,80)
Number of
Part Number Contacts
324-AG19DC 24
324-1G7 * 24
328-AG19DC 28
328-1G7 * 28
332-AG19DC 32
332-1G7 * 32
340-AG19DC 40
340-1G7 * 40
342-AG19DC 42
300C Series
STANDARD CONFIGURATIONS/PART NUMBERS
Number of
Part Number Contacts
306-AG19DC * 6
308-AG19DC * 8
314-AG19DC * 14
316-AG19DC * 16
318-AG19DC * 18
320-AG19DC * 20
324-AG10DC * 24
328-AG10DC 28
328-10G7 * 28
332-AG10DC 32
A
.300
(7,62)
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.200
(30,48)
1.400
(35,56)
1.400
(35,56)
1.600
(40,64)
C
.400
(10,16)
Stamped Dual Wipe Contact DIP Sockets
“D”
“A”
.023
(0,58)
.100
(2,54)
.007
(0,18)
“B”
“C”
Max.
.015
(0,38)
Max.
.210
(5,33)
Max.
.125
(3,18)
Min.
.100
(2,54)
TYP.
“D”
“B”
.035
(0,89)
Polarization Notch
P.C.B. Hole Layout
Tolerance ±.002 (0,05)
* Denotes Open Frame Design
D
.200
(5,08)
.300
(7,62)
.600
(15,24)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.100
(27,94)
1.300
(33,02)
1.300
(33,02)
1.500
(38,10)
A
1.200
(30,48)
1.200
(30,48)
1.400
(35,56)
1.400
(35,56)
1.600
(40,64)
1.600
(40,64)
2.000
(50,80)
2.000
(50,80)
2.100
(53,34)
C
.700
(17,78)
B*
.600 ± .005
(15,24 ± 0,13)
B*
.400 ± .005
(10,16 ± 0,13)
Number of
Part Number Contacts
322-AG19DC 22
A
1.100
(27,94)
C
.500
(12,70)
D
1.000
(25,40)
Open Frame Ladder
328-10G7 328-AG10DC
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A10
A
Quality & Innovation From The Product Group
500 Series
DIP Socket with Four-Fingered Contact & Solid Insulator
FEATURES:
The Augat 500 Series Socket features a precision four-finger inner contact
to produce the industry standard for high reliability screw machine sockets.
• Precision four-finger inner contact provides concentric funnel entry for
easy flat and round lead insertion
• Machined (Premium Series) and stamped (Economy Series) contacts
are available
• "X" & "Y" stackable
• Non-wicking, closed bottom sleeve gives 100% protection against flux
and solder contamination. Choice of solderless wrap or PC termination
• Accommodates 6 through 40 pin DIPS, rectangular or round leads
•
®
Recognized under the Component Program of Underwriters
Laboratories, Inc. file no. E111362
• Beryllium copper inner contact for maximum mechanical and
electrical performance
• For extreme conditions involving shock and vibration, Augat's high
retention series is available
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• PCB Hole Size Range: .035" ± .002" (0,89 ± 0,05) PC tail,
.055" ± .003" (1,40 ± 0,08) solderless wrap
• IC Pin Dimension Range: .009" x .015" (0,23 x 0,38) through
.011" x .020" (0,28 x 0,51)
.016" to .021" (0,41 to 0,53) round lead,
.105" (2,67) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Sleeve ............................ Machined brass/formed copper
Contact .......................... Beryllium copper
Sleeve Plating ................Tin/lead or gold
Contact Plating.............. Premium or Economy Series (ES) - gold or
tin/lead
Economy Series (ESL) - low gold
Vapor Phase/IR Compatible
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition II, 10 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition C, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force ................ 125 Grams (4.4 oz.) average with .018" (0,46) dia.
polished steel pin (Premium Series)
200 Grams (7.1 oz.) average with .018" (0,46) dia.
polished steel pin (Economy Series)
Inner Contact Retention
in Sleeve......................7.5 Lbs. per line average
Sleeve Retention
in Plastic..................... 3.0 Lbs. per line minimum
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force .............. Premium - 134 Grams (4.7 oz.) average with a
.018" (0,46) dia. polished steel pin
Economy - 179 Grams (6.3 oz.) average with a
.018" (0,46) dia. polished steel pin
Withdrawal Force ..........63 Grams (2.2 oz.) average with a .018" (0,46)
(Premium and Economy) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 5,000 Megohms min. @ 500 VDC per
MIL-STD-1344, Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2, Cond. II
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temperature ..Gold inner contact -55°C to +125°C,
Tin/lead inner contact -55°C to +105°C
Wide tapered entry
Precision
four-finger
inner contact
Solderless wrap
or PC termination
Non-wicking
closed bottom
Low profile
“X” & “Y”
stackable
insulator
528-AG11D-ES
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A11
A
500 Series
Economy Series Premium Figure Position Centerline Contact Sleeve
506-AG10D-ES 506-AG10D 6 Gold Gold
506-AG10D-ESL 6 Low Gold Gold
506-AG11D-ES 506-AG11D 1 6 Gold Tin/Lead
506-AG11D-ESL 6 Low Gold Tin/Lead
506-AG12D-ES 506-AG12D 6 Tin/Lead Tin/Lead
508-AG10D-ES 508-AG10D 8 Gold Gold
508-AG10D-ESL 8 Low Gold Gold
508-AG11D-ES 508-AG11D 1 8 Gold Tin/Lead
508-AG11D-ESL 8 Low Gold Tin/Lead
508-AG12D-ES 508-AG12D 8 Tin/Lead Tin/Lead
514-AG10D-ES 514-AG10D 14 Gold Gold
514-AG10D-ESL 14 Low Gold Gold
514-AG11D-ES 514-AG11D 1 14 Gold Tin/Lead
514-AG11D-ESL 14 Low Gold Tin/Lead
514-AG12D-ES 514-AG12D 14 Tin/Lead Tin/Lead
516-AG10D-ES 516-AG10D 16 Gold Gold
516-AG10D-ESL 16 Low Gold Gold
516-AG11D-ES 516-AG11D 1 16 Gold Tin/Lead
516-AG11D-ESL 16 Low Gold Tin/Lead
516-AG12D-ES 516-AG12D 16 Tin/Lead Tin/Lead
518-AG10D-ES 518-AG10D 18 Gold Gold
518-AG10D-ESL 18 Low Gold Gold
518-AG11D-ES 518-AG11D 1 18 Gold Tin/Lead
518-AG11D-ESL 18 Low Gold Tin/Lead
518-AG12D-ES 518-AG12D 18 Tin/Lead Tin/Lead
520-AG10D-ES 520-AG10D 20 Gold Gold
520-AG10D-ESL 20 Low Gold Gold
520-AG11D-ES 520-AG11D 1 20 Gold Tin/Lead
520-AG11D-ESL 20 Low Gold Tin/Lead
520-AG12D-ES 520-AG12D 20 Tin/Lead Tin/Lead
522-AG10D-ES 522-AG10D 22 Gold Gold
522-AG10D-ESL 22 Low Gold Gold
522-AG11D-ES 522-AG11D 1 22 Gold Tin/Lead
522-AG11D-ESL 22 Low Gold Tin/Lead
522-AG12D-ES 522-AG12D 22 Tin/Lead Tin/Lead
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.400
(10,16)
.300
(7,62)
Economy Series Premium Figure Position Centerline Contact Sleeve
524-AG65D-ES 524-AG65D 24 Gold Gold
524-AG65D-ESL 24 Low Gold Gold
524-AG66D-ES 524-AG66D 2 24 Gold Tin/Lead
524-AG66D-ESL 24 Low Gold Tin/Lead
524-AG13D-ES 524-AG13D 24 Tin/Lead Tin/Lead
524-AG10D-ES 524-AG10D 24 Gold Gold
524-AG10D-ESL 24 Low Gold Gold
524-AG11D-ES 524-AG11D 2 24 Gold Tin/Lead
524-AG11D-ESL 24 Low Gold Tin/Lead
524-AG12D-ES 524-AG12D 24 Tin/Lead Tin/Lead
528-AG10D-ES 528-AG10D 28 Gold Gold
528-AG10D-ESL 28 Low Gold Gold
528-AG11D-ES 528-AG11D 2 28 Gold Tin/Lead
528-AG11D-ESL 28 Low Gold Tin/Lead
528-AG12D-ES 528-AG12D 28 Tin/Lead Tin/Lead
532-AG10D-ES 532-AG10D 32 Gold Gold
532-AG10D-ESL 32 Low Gold Gold
532-AG11D-ES 532-AG11D 2 32 Gold Tin/Lead
532-AG11D-ESL 32 Low Gold Tin/Lead
532-AG12D-ES 532-AG12D 32 Tin/Lead Tin/Lead
536-AG10D-ES 536-AG10D 36 Gold Gold
536-AG10D-ESL 36 Low Gold Gold
536-AG11D-ES 536-AG11D 2 36 Gold Tin/Lead
536-AG11D-ESL 36 Low Gold Tin/Lead
536-AG12D-ES 536-AG12D 36 Tin/Lead Tin/Lead
540-AG10D-ES 540-AG10D 40 Gold Gold
540-AG10D-ESL 40 Low Gold Gold
540-AG11D-ES 540-AG11D 2 40 Gold Tin/Lead
540-AG11D-ESL 40 Low Gold Tin/Lead
540-AG12D-ES 540-AG12D 40 Tin/Lead Tin/Lead
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.400
(10,16)
PART NUMBERS
Note: Part numbers in this chart and in detail shown refer to
a .125" PC Tail Pin
ECONOMY AND PREMIUM SERIES - .180" PC TAIL PINS
5XX-AG44D-XXX - Gold contact, tin/lead sleeve
5XX-AG45D-XXX - Gold contact, gold sleeve
5XX-AG143D-XXX - Tin/lead contact, tin/lead sleeve
HIGH RETENTION SERIES
5XX-AG34D - Gold contact, tin/lead sleeve
5XX-AG33D - Gold contact, gold sleeve
5XX-AG138D - Tin/lead contact, tin/lead sleeve
DIP Socket with Four-Fingered Contact & Solid Insulator
Number of
Contacts
6
8
14
16
18
20
22
A
.300
(7,62)
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.150
(29,21)
B*
.300
(7,62)
.400
(10,16)
C
.400
(10,16)
.500
(12,70)
Number of
Contacts
24
24
28
32
36
40
A
1.200
(30,48)
1.200
(30,48)
1.400
(35,56)
1.600
(40,64)
1.800
(47,72)
2.000
(50,80)
B*
.400
(10,16)
.600
(15,24)
C
.500
(12,70)
.700
(45,72)
STANDARD CONFIGURATIONS
For wire wrap sockets or 24 position on .400" (10,16) in high retention or .180 (4,57) tails, please consult factory.
* Dimension B ± .005
(0,13)
AUGAT
.035
(0,89)
.100
(2,54)
Typ.
P.C.B. Hole Layout
Tolerance ±.002 (0,05)
Polarization Notch .093 (2,36) Thru hole
(location varies with
number of contacts)
“A”
Max.
AUGAT “C”
Max.
“B”
“B”
.100
(2,54)
Typ.
.180
(4,57)
Max.
.180
(4,57)
Max.
.125
(3,18)
.135
(3,43)
Max.
Ø.020
(0,51)
Typ.
“B”
Figure 1
Figure 2
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A12
A
Quality & Innovation From The Product Group
700 Series
FEATURES:
A disposable aluminum carrier forms the backbone of the 700 Series
socket, an innovative extension of the Augat precision four-fingered, inner
contact concept. Conceived for IC applications requiring maximum air
flow for cooling, the 700 Series eliminates heat entrapment associated with
an insulator. Additional benefits are:
• Easy solder joint inspection-easy cleaning-easy repair
• “X” & “Y” stackability for circuit flexibility and optimum use of PCB
real estate
• Gang insertion of socket pins into PC boards
• 100% non-wicking of flux and solder
• Standard or low profile PC board mounting
• Availability in 6 to 40 positions on .100"(2,54) centers and a wide
variety of row spacing
• Machined (Premium Series) and stamped (Economy Series) contacts
are available
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• IC Pin Dimension Range:.016" to .021" (0,41 to 0,53) dia.,
.105" (2,67) min. length
• PCB Hole Size Range: .035" ± .003" (0,89 ± 0,08) standard mount,
.055 ± .001" (1,40 ± 0,03) low profile mount
MATERIAL SPECIFICATIONS:
Carrier ............................Aluminum
Sleeve ............................ Machined brass
Contact .......................... Beryllium copper
Sleeve Plating ................Tin/lead or gold
Contact Plating.............. Premium or Economy Series (ES) - gold or
tin/lead
Economy Series (ESL) - low gold
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition II, 10 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition C, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force ................ 125 Grams average with .018" (0,46) dia.
polished steel pin (Premium Series)
200 Grams average with .018" (0,46) dia.
polished steel pin (Economy Series)
Inner Contact Retention
in Sleeve ....................7.5 Lbs. per line average
Sleeve Retention
in Plastic..................... 3.0 Lbs. per line minimum
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force .............. Premium - 134 Grams (4.7 oz.) average with a
.018" (0,46) dia. polished steel pin
Economy - 179 Grams (6.3 oz.) average with a
.018" (0,46) dia. polished steel pin
Withdrawal Force .......... 63 Grams (2.2 oz.) average with a
(Premium and Economy) .018" (0,46) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 5,000 Megohms min. @ 500 VDC
per MIL-STD-1344, Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2, Cond. II
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temperature ..Gold inner contact -55°C to +125°C,
Tin/lead inner contact -55°C to +105°C
Four-Fingered Contacts Disposable Carriers
732-AG4D-ES
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A13
A
Economy Series Premium Series Number of Contact Sleeve
Part Number Part Number Contacts Plating Plating
–––– 724-AG1D 24 Gold Gold
724-AG2D-ES 724-AG2D 24 Gold Tin/Lead
724-AG2D-ESL –––– 24 Low Gold Tin/Lead
–––– 724-AG21D 24 Gold Gold
724-AG22D-ES 724-AG22D 24 Gold Tin/Lead
724-AG22D-ESL –––– 24 Low Gold Tin/Lead
–––– 724-AG3D 24 Gold Gold
724-AG4D-ES 724-AG4D 24 Gold Tin/Lead
724-AG4D-ESL –––– 24 Low Gold Tin/Lead
–––– 728-AG3D 28 Gold Gold
728-AG4D-ES 728-AG4D 28 Gold Tin/Lead
728-AG4D-ESL –––– 28 Low Gold Tin/Lead
–––– 732-AG3D 32 Gold Gold
732-AG4D-ES 732-AG4D 32 Gold Tin/Lead
732-AG4D-ESL –––– 32 Low Gold Tin/Lead
–––– 736-AG3D 36 Gold Gold
736-AG4D-ES 736-AG4D 36 Gold Tin/Lead
736-AG4D-ESL –––– 36 Low Gold Tin/Lead
–––– 740-AG3D 40 Gold Gold
740-AG4D-ES 740-AG4D 40 Gold Tin/Lead
740-AG4D-ESL –––– 40 Low Gold Tin/Lead
700 Series
Four-Fingered Contacts Disposable Carriers
STANDARD MOUNT PART NUMBERS
Economy Series Premium Series Number of Contact Sleeve
Part Number Part Number Contacts Plating Plating
–––– 706-AG1D 6 Gold Gold
706-AG2D-ES 706-AG2D 6 Gold Tin/Lead
706-AG2D-ESL –––– 6 Low Gold Tin/Lead
–––– 708-AG1D 8 Gold Gold
708-AG2D-ES 708-AG2D 8 Gold Tin/Lead
708-AG2D-ESL –––– 8 Low Gold Tin/Lead
–––– 714-AG1D 14 Gold Gold
714-AG2D-ES 714-AG2D 14 Gold Tin/Lead
714-AG2D-ESL –––– 14 Low Gold Tin/Lead
–––– 716-AG1D 16 Gold Gold
716-AG2D-ES 716-AG2D 16 Gold Tin/Lead
716-AG2D-ESL –––– 16 Low Gold Tin/Lead
–––– 718-AG1D 18 Gold Gold
718-AG2D-ES 718-AG2D 18 Gold Tin/Lead
718-AG2D-ESL –––– 18 Low Gold Tin/Lead
–––– 720-AG1D 20 Gold Gold
720-AG2D-ES 720-AG2D 20 Gold Tin/Lead
720-AG2D-ESL –––– 20 Low Gold Tin/Lead
–––– 722-AG1D 22 Gold Gold
722-AG2D-ES 722-AG2D 22 Gold Tin/Lead
722-AG2D-ESL –––– 22 Low Gold Tin/Lead
–––– 722-AG21D 22 Gold Gold
722-AG22D-ES 722-AG22D 22 Gold Tin/Lead
722-AG22D-ESL –––– 22 Low Gold Tin/Lead
A
.300
(7,62)
.400
(10,16)
.300
(7,62)
A
.300
(7,62)
.400
(10,16)
.600
(15,24)
MOUNTING OPTIONS
Standard Mount Low Profile Mount
Gold Sleeve LSG-1AG14-1 LSG-1DG17-1
Tin/Lead Sleeve LSG-1AG14-14 LSG-1DG17-14
.031
(0,78)
.290
(7,36)
Ref.
.020 ± .003
(0,50 ± 0,05)
Dia.
.100
(2,54)
.053 ± .003
(1,34 ± 0,05)
Dia.
.072 ± .003
(1,82 ± 0,05)
Dia.
.165 ± .010
(4,19 ± 0,25)
.125 ± .010
(3,17 ± 0,25)
“A”
±.005
(0,13)
Low Profile
(No Tail)
Standard
(P.C. Tail)
REPLACEMENT SOCKET TERMINALS
Low Profile Number of Outer Sleeve
Part Number Contacts Plating
724-AG10D 24 Gold
724-AG20D 24 Tin/Lead
724-AG410D 24 Gold
724-AG420D 24 Tin/Lead
724-AG30D 24 Gold
724-AG40D 24 Tin/Lead
728-AG30D 28 Gold
728-AG40D 28 Tin/Lead
732-AG30D 32 Gold
732-AG40D 32 Tin/Lead
736-AG30D 36 Gold
736-AG40D 36 Tin/Lead
740-AG30D 40 Gold
740-AG40D 40 Tin/Lead
LOW PROFILE PART NUMBERS
Low Profile Number of Outer Sleeve
Part Number Contacts Plating
706-AG10D 6 Gold
706-AG20D 6 Tin/Lead
708-AG10D 8 Gold
708-AG20D 8 Tin/Lead
714-AG10D 14 Gold
714-AG20D 14 Tin/Lead
716-AG10D 16 Gold
716-AG20D 16 Tin/Lead
718-AG10D 18 Gold
718-AG20D 18 Tin/Lead
720-AG10D 20 Gold
720-AG20D 20 Tin/Lead
722-AG10D 22 Gold
722-AG20D 22 Tin/Lead
722-AG310D 22 Gold
722-AG320D 22 Tin/Lead
A
.300
(7,62)
.400
(10,16)
.300
(7,62)
A
.300
(7,62)
.400
(10,16)
.600
(15,24)
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A14
A
Quality & Innovation From The Product Group
800 Series
FEATURES:
The Augat 800 Series combines precision four-fingered inner contacts with
an open ladder insulator to produce the ultimate high-reliability socket.
• Precision four-fingered inner contacts provide concentric funnel entry
for easy flat and round lead insertion
• “X” & “Y” stackable. Open ladder for cooling, cleaning and inspection.
Low profile
• Accommodates 8 through 64 pins DIPS, rectangular or round IC leads
• Non-wicking, closed bottom sleeve provides 100% protection
against flux and solder contamination. Choice of solderless
wrap or PC termination
•
®
Recognized under the Component Program of Underwriter
Laboratories, Inc. File No. E111362
• Beryllium copper inner contact for maximum mechanical and
electrical performance
• Machined (Premium Series) and stamped (Economy Series) contacts
are available
• For extreme conditions involving shock and vibration, Augat's high
retention force contact is available
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• PCB Hole Size Range: .035" ± .002" (0,89 ± 0,05) PC tail,
.055" ± .003" (1,40 ± 0,08) solderless wrap
• IC Pin Dimension Range: .009" x .015" (0,23 x 0,38) through
.011" x .020" (0,28 x 0,51)
.016" to .021" (0,41 to 0,53) round lead
.105" (2,67) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Sleeve ............................ Machined brass
Contact .......................... Beryllium copper
Sleeve Plating ................Tin/lead or gold
Contact Plating.............. Premium or Economy Series (ES) - gold or
tin/lead
Economy Series (ESL) - low gold
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition II, 10 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition C, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force ................ 125 Grams (4.4 oz.) average with .018" (0,46) dia.
polished steel pin (Premium Series)
200 Grams (7.1 oz.) average with .018" (0,46) dia.
polished steel pin (Economy Series)
Inner Contact
Retention.................... 7.5 Lbs. per line average
Sleeve Retention
in Plastic .................... 3.0 Lbs. per line minimum
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force .............. Premium - 134 grams (4.7 oz.) average with a
.018" (0,46) dia. polished steel pin
Economy - 179 grams (6.3 oz.) average with a
.018" (0,46) dia. polished steel pin
Withdrawal Force ..........63 Grams (2.2 oz.) average with a
(Premium and Economy) .018" (0,46) dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
Capacitance ....................1 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 5,000 Megohms min. @ 500 VDC per
MIL-STD-1344, Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2, Cond. II
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temperature ..Gold inner contact -55°C to +125°C,
Tin/lead inner contact -55°C to +105°C
Four-Fingered Contact Open Insulator DIP Sockets
828-AG11D-ES
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A15
A
800 Series
Four-Fingered Contact Open Insulator DIP Sockets
Number of
Contacts
8
14
16
18
20
22
24
24
A
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.100
(27,94)
1.200
(30,48)
C
.400
(10,16)
.500
(12,70)
.400
(10,16)
.500
(12,70)
B*
.300
(7,62)
.400
(10,16)
.300
(7,62)
.400
(10,16)
Number of
Contacts
24
28
32
36
40
42
48
64
A
1.200
(30,48)
1.400
(35,56)
1.600
(40,64)
1.800
(45,72)
2.000
(50,80)
2.100
(53,34)
2.400
(60,96)
3.200
(81,28)
C
.700
(17,78)
1.000
(25,40)
B*
.600
(15,24)
.900
(22,86)
STANDARD CONFIGURATIONS
Economy Series Premium Series Position Centerline Contact Sleeve
808-AG10D-ES 808-AG10D 8 Gold Gold
808-AG10D-ESL 8 Low Gold Gold
808-AG11D-ES 808-AG11D 8 Gold Tin/Lead
808-AG11D-ESL 8 Low Gold Tin/Lead
808-AG12D-ES 808-AG12D 8 Tin/Lead Tin/Lead
814-AG10D-ES 814-AG10D 14 Gold Gold
814-AG10D-ESL 14 Low Gold Gold
814-AG11D-ES 814-AG11D 14 Gold Tin/Lead
814-AG11D-ESL 14 Low Gold Tin/Lead
814-AG12D-ES 814-AG12D 14 Tin/Lead Tin/Lead
816-AG10D-ES 816-AG10D 16 Gold Gold
816-AG10D-ESL 16 Low Gold Gold
816-AG11D-ES 816-AG11D 16 Gold Tin/Lead
816-AG11D-ESL 16 Low Gold Tin/Lead
816-AG12D-ES 816-AG12D 16 Tin/Lead Tin/Lead
818-AG10D-ES 818-AG10D 18 Gold Gold
818-AG10D-ESL 18 Low Gold Gold
818-AG11D-ES 818-AG11D 18 Gold Tin/Lead
818-AG11D-ESL 18 Low Gold Tin/Lead
818-AG12D-ES 818-AG12D 18 Tin/Lead Tin/Lead
820-AG10D-ES 820-AG10D 20 Gold Gold
820-AG10D-ESL 20 Low Gold Gold
820-AG11D-ES 820-AG11D 20 Gold Tin/Lead
820-AG11D-ESL 20 Low Gold Tin/Lead
820-AG12D-ES 820-AG12D 20 Tin/Lead Tin/Lead
822-AG10D-ES 822-AG10D 22 Gold Gold
822-AG10D-ESL 22 Low Gold Gold
822-AG11D-ES 822-AG11D 22 Gold Tin/Lead
822-AG11D-ESL 22 Low Gold Tin/Lead
822-AG12D-ES 822-AG12D 22 Tin/Lead Tin/Lead
824-AG30D-ES 824-AG30D 24 Gold Gold
824-AG30D-ESL 24 Low Gold Gold
824-AG31D-ES 824-AG31D 24 Gold Tin/Lead
824-AG31D-ESL 24 Low Gold Tin/Lead
824-AG32D-ES 824-AG32D 24 Tin/Lead Tin/Lead
824-AG65D-ES 824-AG65D 24 Gold Gold
824-AG65D-ESL 24 Low Gold Gold
824-AG66D-ES 824-AG66D 24 Gold Tin/Lead
824-AG66D-ESL 24 Low Gold Tin/Lead
824-AG14D-ES 824-AG14D 24 Tin/Lead Tin/Lead
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.400
(10,16)
.400
(10,16)
.300
(7,62)
Economy Series Premium Series Position Centerline Contact Sleeve
824-AG10D-ES 824-AG10D 24 Gold Gold
824-AG10D-ESL 24 Low Gold Gold
824-AG11D-ES 824-AG11D 24 Gold Tin/Lead
824-AG11D-ESL 24 Low Gold Tin/Lead
824-AG12D-ES 824-AG12D 24 Tin/Lead Tin/Lead
828-AG10D-ES 828-AG10D 28 Gold Gold
828-AG10D-ESL 28 Low Gold Gold
828-AG11D-ES 828-AG11D 28 Gold Tin/Lead
828-AG11D-ESL 28 Low Gold Tin/Lead
828-AG12D-ES 828-AG12D 28 Tin/Lead Tin/Lead
832-AG10D-ES 832-AG10D 32 Gold Gold
832-AG10D-ESL 32 Low Gold Gold
832-AG11D-ES 832-AG11D 32 Gold Tin/Lead
832-AG11D-ESL 32 Low Gold Tin/Lead
832-AG12D-ES 832-AG12D 32 Tin/Lead Tin/Lead
836-AG10D-ES 836-AG10D 36 Gold Gold
836-AG10D-ESL 36 Low Gold Gold
836-AG11D-ES 836-AG11D 36 Gold Tin/Lead
836-AG11D-ESL 36 Low Gold Tin/Lead
836-AG12D-ES 836-AG12D 36 Tin/Lead Tin/Lead
840-AG10D-ES 840-AG10D 40 Gold Gold
840-AG10D-ESL 40 Low Gold Gold
840-AG11D-ES 840-AG11D 40 Gold Tin/Lead
840-AG11D-ESL 40 Low Gold Tin/Lead
840-AG12D-ES 840-AG12D 40 Tin/Lead Tin/Lead
842-AG10D-ES 842-AG10D 42 Gold Gold
842-AG10D-ESL 42 Low Gold Gold
842-AG11D-ES 842-AG11D 42 Gold Tin/Lead
842-AG11D-ESL 42 Low Gold Tin/Lead
842-AG12D-ES 842-AG12D 42 Tin/Lead Tin/Lead
848-AG10D-ES 848-AG10D 48 Gold Gold
848-AG10D-ESL 48 Low Gold Gold
848-AG11D-ES 848-AG11D 48 Gold Tin/Lead
848-AG11D-ESL 48 Low Gold Tin/Lead
848-AG12D-ES 848-AG12D 48 Tin/Lead Tin/Lead
864-AG10D-ES 864-AG10D 64 Gold Gold
864-AG10D-ESL 64 Low Gold Gold
864-AG11D-ES 864-AG11D 64 Gold Tin/Lead
864-AG11D-ESL 64 Low Gold Tin/Lead
864-AG12D-ES 864-AG12D 64 Tin/Lead Tin/Lead
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
PART NUMBERS
Economy and Premium Series - .180" (4,57) PC Tail
Pins
8XX-AG44D-XXX - Gold contact, tin/lead sleeve
8XX-AG45D-XXX - Gold contact, gold sleeve
8XX-AG43D-XXX - Tin/lead contact, tin/lead sleeve
High Retention Series
8XX-AG34D - Gold contact, tin/lead sleeve
8XX-AG33D - Gold contact, gold sleeve
8XX-AG38D - Tin/lead contact, tin/lead sleeve
.300
(7,62) .600
(15,24)
.900
(22,86)
Note: Part numbers in this chart and in detail shown refer to a .125" (3,18) PC Tail Pin
For wire-wrap sockets or 24 position on .300" (7,62) or .400" (10,16) in high retention or .180" (4,57) tails, please consult factory.
.100
(2,54)
Typ.
.100
(2,54)
Typ.
Ø.020
(0,51)
.105
(2,67)
Max.
.210
(5,33)
Max.
.125
(3,18)
.180
(4,57)
Max.
"B"
Ø.035
(0,89)
"B"
"B"
"A"
Max.
Number of windows
varies with number of contacts
"C"
Max. P.C.B. Hole Layout
Tolerance ± .002 (0,05)
* Dimension B ± .005
(0,13)
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A16
A
Quality & Innovation From The Product Group
800SM Series
Surface Mount DIP Sockets
FEATURES:
Augat offers the precision machined 800SM Series which achieves
compliancy to the board surface and is designed for high temperatures
typical of vapor phase and infrared reflow soldering.
• “Butt” style terminals float in plastic housing for compliancy
to board surface
• Precision four-fingered inner contacts provide concentric funnel entry
for easy flat or round insertion
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• IC Pin Dimension Range: .009" x .015" (0,23 x 0,38) through
.011" x .020" (0,28 x 0,51)
.016" to .021" (0,41 to 0,53) round lead
.105" (2,67) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester, UL rated 94V-0
Outer Sleeve .................. Brass
Contacts..........................Beryllium copper
Sleeve Plating ................Tin/lead
Contact Plating.............. Gold or tin/lead
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition II, 10 G's
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition C, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Inner Contact
Retention ................ 7.5 Lbs. per line average
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force .............. 179 Grams (6.3 oz.) average with a .018" (0,46)
dia. polished steel pin
Withdrawal Force ..........63 Grams (2.2 oz.) average with a .018" (0,46)
dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 5,000 Megohms min. @ 500 VDC per
MIL-STD-1344, Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2, Cond. II
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temperature ..Gold inner contact -55°C to +125°C,
Tin/lead inner contact -55°C to +105°C
814-AG11SM
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A17
A
800SM Series
Surface Mount DIP Sockets
PART NUMBERS
Part Number Position Contact
808-AG11SM 8 Gold
808-AG12SM 8 Tin/Lead
814-AG11SM 14 Gold
814-AG12SM 14 Tin/Lead
816-AG11SM 16 Gold
816-AG12SM 16 Tin/Lead
818-AG11SM 18 Gold
818-AG12SM 18 Tin/Lead
820-AG11SM 20 Gold
820-AG12SM 20 Tin/Lead
822-AG11SM 22 Gold
822-AG12SM 22 Tin/Lead
824-AG31SM 24 Gold
824-AG32SM 24 Tin/Lead
824-AG66SM 24 Gold
824-AG14SM 24 Tin/Lead
Centerline
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.400
(10,16)
Part Number Position Contact
824-AG11SM 24 Gold
824-AG12SM 24 Tin/Lead
828-AG11SM 28 Gold
828-AG12SM 28 Tin/Lead
832-AG11SM 32 Gold
832-AG12SM 32 Tin/Lead
836-AG11SM 36 Gold
836-AG12SM 36 Tin/Lead
840-AG11SM 40 Gold
840-AG12SM 40 Tin/Lead
842-AG11SM 42 Gold
842-AG12SM 42 Tin/Lead
848-AG11SM 48 Gold
848-AG12SM 48 Tin/Lead
864-AG11SM 64 Gold
864-AG12SM 64 Tin/Lead
Centerline
.600
(15,24)
.600
(15,24)
.600
(15,24))
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.900
(22,86)
STANDARD CONFIGURATIONS
A
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.100
(27,94)
1.200
(30,48)
1.200
(30,48)
B*
.300
(7,62)
.400
(10,16)
.300
(7,62)
.400
(10,16)
C
.400
(10,16)
.500
(12,70)
.400
(10,16)
.500
(12,70)
Number of
Contacts
8
14
16
18
20
22
24
24
A
1.200
(30,48)
1.400
(35,36)
1.600
(40,64)
1.800
(45,72)
2.000
(50,80)
2.100
(53,34)
2.400
(60,96)
3.200
(81,28)
B*
.600
(15,24)
.900
(22,86)
C
.700
(17,78)
1.000
(25,40)
Number of
Contacts
24
28
32
36
40
42
48
64
“B”“B” “C”
.105
(2,67)
Max.
.100
(2,54) .070
(1,78)
Square
“A”
Ø.030
(0,76)
Ref.
.136
(3,45)
Max.
Recommended Pad Pattern
Tolerance ± .002 (0,05)
Number of windows
varies with number of contacts
* Dimension B ± .005
(0,13)
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A18
A
Quality & Innovation From The Product Group
2400 Series
Shrink DIP Sockets (.070 Pitch)
FEATURES:
The Augat 2400 Series enables the user to reliably remove or replace
shrink DIP devices (devices on .070 centerline).
• Sleeve body incorporated in socket reduces the risk of solder bridging
during wave solder
• Open ladder design to permit device cooling
• Open ladder design makes available additional space within socket for
component placement
• Non-wicking, closed bottom, machined sleeve protects 100% against
flux or solder contamination
• Concentric funnel entry for easy insertion of flat or round IC leads
•
®
Recognized under the Component Program of Underwriters
Laboratories, Inc. File No. E111362
APPLICATION DIMENSIONS:
• PCB Thickness Range: Standard .062' (1,57)
• PCB Hole Size Range: .035"± .003" (0,89 ± 0,08)
• IC Pin Dimension Range: .016" to .021" (0,41 to 0,53) dia.
.105" (2,67) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Thermoplastic polyester UL rated 94V-0
Outer Sleeve .................. Machined brass/formed copper, tin/lead plated
Inner Contact..................Beryllium copper, gold or tin/lead plated
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1,
Condition II, 10 G’s
Shock ..............................Passed MIL-STD-1344, Method 2004.1,
Condition C, 100 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force ................ 200 Grams with .018" (0,46) dia. polished
steel pin (typ.)
Inner Contact
Retention.................... 7.5 Lbs. per line average
Sleeve Retention
in Plastic .................... 3.0 Lbs. per line minimum
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force .............. 179 grams (6.3 oz.) average with a .018" (0,46)
dia. polished steel pin
Withdrawal Force ..........63 Grams (2.2 oz.) average with a .018" (0,46)
dia. polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202, Method 305
(contact to contact)
Insulation Resistance .... 5,000 Megohms min. @ 500 VDC per
MIL-STD-1344, Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 Volts RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2, Cond. II
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temperature ..Gold inner contact -55°C to +125°C,
Tin/lead inner contact -55°C to +105°C
2400-FPGT-764
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A19
A
2400 Series
Shrink DIP Sockets (.070 Pitch)
PART NUMBERS
Part Contact Sleeve
Number Position Plating Plating
2400-FPHT-648 Gold Tin/Lead
2400-FPGT-648 48 Low Gold Tin/Lead
2400-FPTT- 648 Tin/Lead Tin/Lead
2400-FPHT-652 Gold Tin/Lead
2400-FPGT-652 52 Low Gold Tin/Lead
2400-FPTT- 652 Tin/Lead Tin/Lead
2400-FPHT-764 Gold Tin/Lead
2400-FPGT-764 64 Low Gold Tin/Lead
2400-FPTT-764 Tin/Lead Tin/Lead
Centerline
.600
(15,24)
.600
(15,24)
750
(19,05)
STANDARD CONFIGURATIONS
Number of
Contacts
48
52
64
A
1.743
(44,27)
1.883
(47,83)
2.300
(58,42)
B
1.610
(40,89)
1.750
(44,45)
2.176
(55,27)
C
.497
(17,68)
.497
(17,68)
.846
(21,49)
D
.600
(15,24)
.600
(15,24)
.750
(19,05)
E
.436
(11,07)
.436
(11,07)
.585
(14,86)
.070
(1,78)
“B”
“A”
“D” “E” “C”
Polarizing
angle
.020
(0,51)
.029
(0,74)
.208
(5,28)
.125
(3,18)
.750
(19,05)
Recommended Hole Layout
Tolerance ± .002 (0,05)
2400-FPHT-764 Shown
.070
(1,78)
typ.
.035
(0,89)
typ.
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A20
A
Quality & Innovation From The Product Group
DS Series
Capacitor Socket With Four-Finger Contact
FEATURES:
Augat has combined its four-finger high reliability contact with a surface
mount capacitor and a circuit assembly to create a full line of decoupling
(dual-in-line) sockets.
• Available in three lead termination styles, .125" (3,18) PC tail,
.180" (4,57) PC tail and 3-level solderless wire wrap
• Reduces PCB utilized space by 12% to 15%
• Allows handling, inventory and installation of one component
instead of two
• Available in three capacitor values: .01µF, .10µF and .33µF
• Optional assignment of voltage and ground available for custom
decoupling requirements, consult factory
APPLICATION DIMENSIONS:
• PCB Hole Size Range:.055" ± .003" (1,40 ± 0,08) Solderless wrap
.035" ± .003" (0,89 ± 0,08) PC solder termination
• IC Pin Dimension Range: .016" to .021" (0,41 to 0,53) dia.
.105" (2,67) min. length
MATERIAL SPECIFICATIONS:
Insulator ........................ Glass epoxy
Outer Sleeve.................. Machined brass/formed copper,
tin/lead or gold plated
Inner Contact..................Beryllium copper, gold over nickel
or tin/lead plated
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-1344, Method 2005.1, Cond. II
Shock ..............................Passed MIL-STD-1344, Method 2004.1, Cond. C
Durability ...................... Passed 50 cycles
Normal Force ................ 115 Grams (4.1 0z.) min. with .018" (0,46) dia.
polished steel pin (typ.)
Inner Contact
Retention....................7.5 Lbs. per line average
Solderability .................. Passed MIL-STD-202, Method 208
Insertion Force .............. 179 Grams (6.3 oz.) average with .018" (0,46) dia.
polished steel pin
Withdrawal Force ..........63 Grams (2.2 oz.) average with .018" (0,46) dia.
polished steel pin
ELECTRICAL
Contact Resistance ........ 10 Milliohms
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202F, Method 305
(adjacent contacts max.)
Insulation Resistance .... 5,000 Megohms @ 500 VDC per MIL-STD-1344,
Method 3003.1
Dielectric Withstanding
Voltage ...................... 1,000 VAC RMS per MIL-STD-1344,
Method 3001.1
ENVIRONMENTAL
Moisture Resistance ...... Passed MIL-STD-202, Method 106
Temperature Cycling .... Passed MIL-STD-1344, Method 1003.1, Cond. A
Operation Temp.* ..........+10°C to +85°C
* This temperature range applies to the capacitor only
DS1-316-1AR
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A21
A
DS Series
Number of
Contacts
8
14
16
18
20
22
22
24
A
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,40)
1.100
(27,94)
1.200
(30,48)
C
.400
(10,16)
.500
(12,70)
.400
(10,16)
B*
.300
(7,62)
.400
(10,16)
.300
(7,62)
Number of
Contacts
24
24
28
28
32
40
48
A
1.200
(30,48)
1.200
(30,48)
1.400
(35,56)
1.400
(35,56)
1.600
(40,64)
2.000
(50,80)
2.400
(60,96)
C
.500
(12,70)
.700
(17,78)
.400
(10,16)
.700
(17,78)
B*
.400
(10,16)
.600
(15,24)
.300
(7,62)
.600
(15,24)
STANDARD CONFIGURATIONS
HOW TO ORDER
Capacitor Socket With Four-Finger Contact
.01
µ
F Capacitor .10
µ
F Capacitor .33
µ
F Capacitor Contact Sleeve
DS1-308-1AR DS2-308-1AR DS3-308-1AR Gold Tin/Lead
DS1-308-2AR DS2-308-2AR DS3-308-2AR Gold Gold
DS1-314-1AR DS2-314-1AR DS3-314-1AR Gold Tin/Lead
DSI-314-2AR DS2-314-2AR DS3-314-2AR Gold Gold
DS1-316-1AR DS2-316-1AR DS3-316-1AR Gold Tin/Lead
DS1-316-2AR DS2-316-2AR DS3-316-2AR Gold Gold
DS1-318-1AR DS2-318-1AR DS3-318-1AR Gold Tin/Lead
DS1-318-2AR DS2-318-2AR DS3-318-2AR Gold Gold
DS1-320-1AR DS2-320-1AR DS3-320-1AR Gold Tin/Lead
DS1-320-2AR DS2-320-2AR DS3-320-2AR Gold Gold
DS1-322-1AR DS2-322-1AR DS3-322-1AR Gold Tin/Lead
DS1-322-2AR DS2-322-2AR DS3-322-2AR Gold Gold
DS1-324-1AR DS2-324-1AR DS3-324-1AR Gold Tin/Lead
DS1-324-2AR DS2-324-2AR DS3-324-2AR Gold Gold
DS1-422-1AR DS2-422-1AR DS3-422-1AR Gold Tin/Lead
DS1-422-2AR DS2-422-2AR DS3-422-2AR Gold Gold
DS1-424-1AR DS2-424-1AR DS3-424-1AR Gold Tin/Lead
DS1-424-2AR DS2-424-2AR DS3-424-2AR Gold Gold
DS1-624-1AR DS2-624-1AR DS3-624-1AR Gold Tin/Lead
DS1-624-2AR DS2-624-2AR DS3-624-2AR Gold Gold
DS1-328-1AR DS2-328-1AR DS3-328-1AR Gold Tin/Lead
DS1-328-2AR DS2-328-2AR DS3-328-2AR Gold Gold
DS1-628-1AR DS2-628-1AR DS3-628-1AR Gold Tin/Lead
DS1-628-2AR DS2-628-2AR DS3-628-2AR Gold Gold
DS1-632-1AR DS2-632-1AR DS3-632-1AR Gold Tin/Lead
DS1-632-2AR DS2-632-2AR DS3-632-2AR Gold Gold
DS1-640-1AR DS2-640-1AR DS3-640-1AR Gold Tin/Lead
DS1-640-2AR DS2-640-2AR DS3-640-2AR Gold Gold
DS1-648-1AR DS2-648-1AR DS3-648-1AR Gold Tin/Lead
DS1-648-2AR DS2-648-2AR DS3-648-2AR Gold Gold
For 3-level wire-wrap termination, please consult the factory.
Note: Part numbers in chart and in detail refer to a .125" (3,18) PC tail pin.
“A”
Max.
“B”
“C”
Max.
.100
(2.54)
Ref.
.125 ± .015
(3,18 ± 0,38)
.165
(4,19)
Max.
.020 ± .003
(0,51 ± 0,08)
Dia. Typ.
.070
(1.78)
Max.
.040
(1,02)
Max.
Position
8
14
16
18
20
22
24
22
24
28
32
40
48
Centerline
.300
(7,62)
.400
(10,16)
.600
(15,24)
.300
(7,62)
.600
(15,24)
.180 PC Tails available
DSX-XXX-1BR, gold contact, tin/lead sleeve
DSX-XXX-2BR, gold contact, tin/lead sleeve
* Dimension B ± .005
(0,13)
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A22
A
Quality & Innovation From The Product Group
MCK Series
DIP Sockets
FEATURES:
The Augat VisInPak
™
Family allows gang mounting of socket
terminals without the need for a permanent insulator. The removable
carrier withstands temperature up to 400°C, typical of soldering,
vapor phase and infrared processed. Various terminal choices
provide a full range of mounting profiles.
• Available in all DIP patterns
• Four socket profiles
• The Visual Inspection Package provides easy cleaning
and solder joint inspection
APPLICATION DIMENSIONS:
Contact Styles: H, R, B
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• IC Pin Dimension Range: .016" to .021" (0,41 to 0,53) dia.
.105" (2,67) min. length
Contact Style: A
• PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34)
• IC Pin Dimension Range: .016" to .019" (0,41 to 0,48) dia.
.100" (2,54) min. length
MATERIAL SPECIFICATIONS:
Carrier ............................KAPTON
®
or equivalent
Inner Contact..................Beryllium copper, gold or tin/lead plated
Outer Sleeve .................. Brass or copper, gold or tin/lead plated
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration
Type H, R, A ..........Passed MIL-STD-1344, Method 2005.1,
Condition III, 15 G’s
Type B ....................Passed MIL-STD-1344, Method 2005.1,
Condition V/J
Shock
Type H, R, A ............Passed MIL-STD-1344, Method 2004.1,
Condition G, 100 G’s
Type B ......................Passed MIL-STD-202F, Method 213,
Condition I
Durability ...................... Passed MIL-STD-1344, Method 2016
Normal Force
Type H & R .............. 115 Grams (4.1 oz.) with .018" (0,46) dia.
polished steel pin
Type B ...................... 238 Grams (8.4 oz.) with .018" (0,46) dia.
polished steel pin
Type A ...................... 35 Grams (1.2 oz.) with .018" (0,46) dia.
polished steel pin
Inner Contact
Retention.................... 7.5 Lbs. per line average
Solderability .................. Passed MIL-STD-202F, Method 208
Insertion Force with .018" (0,46) dia. polished steel pin
Type H ...................... 134 Grams (4.7 oz.)
Type R ...................... 179 Grams (6.3 oz.)
Type B ...................... 344 Grams (12.0 oz.)
Type A ...................... 81 Grams (2.9 oz.)
Withdrawal Force with .018" (0,46) dia. polished steel pin
Type H ...................... 77 Grams (2.5 oz.)
Type R ...................... 63 Grams (2.2 oz.)
Type B ...................... 174 Grams (6.1 oz.)
Type A ...................... 50 Grams (1.8 oz.)
ELECTRICAL
Contact Resistance ........ 10 Milliohms
Contact Rating .............. 3 Amps
Capacitance ....................1.0 pF per MIL-STD-202F, Method 305
(contact to contact)
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-1344, Method 1002.2
Thermal Shock .............. Passed MIL-STD-1344, Method 1003.1
Operation Temp. ............Gold inner contact -55°C to +125 °C,
Tin/lead inner contact -55°C to +105°C
MCK-RGHT-316
Removable
Carrier
Typical PCB
Socket
Terminals
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A23
A
MCK Series
DIP Sockets
TABLE 3 - DIP STANDARD CONFIGURATONS
Number of
Contacts
6
8
14
16
18
20
22
22
24
24
24
28
Dim. “C”
±
.025 (0,64)
.200
(5,08)
.400
(10,16)
.400
(10,16)
.400
(10,16)
.400
(10,16)
.400
(10,16)
.500
(12,70)
.400
(10,16)
.400
(10,16)
.700
(17,78)
.500
(12,70)
.400
(10,16)
Dim. “B”
(Typ.)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.300
(7,62)
.400
(10,16)
.300
(7,62)
.300
(7,62)
.600
(15,24)
.400
(10,16)
.300
(7,62)
Dim. “A”
±
.025 (0,64)
.300
(7,62)
.400
(10,16)
.700
(17,78)
.800
(20,32)
.900
(22,86)
1.000
(25,4)
1.100
(27,94)
1.100
(27,94)
1.200
(30,48)
1.200
(30,48)
1.200
(30,48)
1.400
(35,56)
“C”“B”
“A”
HS***N**
.035" Dia.* .040" Dia.* .050" Dia.* Min.
.020 ± .003
(0,51 ± 0,08)
.030 ± .003
(0,76 ± 0,08)
.038 ± .003
(0,97 ± 0,08)
.035
(0,89)
Max.
.075
(1,91)
Max.
.035
(0,89)
Max.
.155
(3,94)
.075
(1,91)
Max.
.075
(1,91)
Max.
.060
(1,52)
Max.
.035
(0,89)
Max.
.166 ± .015
(4,22 ± 0,38)
.125 ± .015
(3,18 ± 0,38)
.125 ± .015
(3,18 ± 0,38)
.095 ± .015
(2,41 ± 0,38)
K
.058" Dia.*
.053 ± .003
(1,35 ± 0,08)
.175 ± .015
(4,45 ± 0,38) .035
(0,89)
Max.
* Recommended Hole Size
QUAD and ZIP Patterns available. Please consult factory. For SIP Patterns, see page B4.
TABLE 2 - PIN SELECTION
Number of
Contacts
28
32
32
36
40
42
48
50
52
52
64
Dim. “A”
±
.025 (0,64)
1.400
(35,56)
1.600
(40,64)
1.600
(40,64)
1.800
(45,72)
2.000
(50,80)
2.100
(53,34)
2.400
(60,96)
2.500
(63,50)
2.600
(66,04)
2.600
(66,04)
3.200
(81,28)
Dim. “C”
±
.025 (0,64)
.700
(17,78)
.700
(17,78)
1.000
(25,4)
.700
(17,78)
.700
(17,78)
.700
(17,78)
.700
(17,78)
1.000
(25,4)
.700
(17,78)
1.000
(25,4)
1.000
(25,4)
Dim. “B”
(Typ.)
.600
(15,24)
.600
(15,24)
.900
(22,86)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.600
(15,24)
.900
(22,86)
.600
(15,24)
.900
(22,86)
.900
(22,86)
M C K
Part Number Example: MCK-RHGT-628
Contact Selection
(see Table 1)
Row Spacing
(see Table 3 for
standard
configurations)
Contact Plating
G - Low Gold
H - Gold
T - Tin/Lead
Pin Selection
(see Table 2) ** N pin only available with R contact. *** S pin only available with A contact.
TABLE 1 - CONTACT SELECTION
Letter Contact Features
H Normal Force (machined)
R Normal Force (stamped)
B High Force (machined)
A Normal Force (stamped)
HOW TO ORDER
Number
of Contacts
Sleeve Plating
G - Gold
T - Tin/Lead
** N pin only available with R contact
*** S pin only available with A contact
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
A24
A
Quality & Innovation From The Product Group
Holtite
®
Series
FEATURES:
The solderless zero-profile Holtite
®
contact is designed to be press-fit into
the plated-thru hole of a printed wiring board. This unique design allows
the plated-thru hole to become the component socket. The outer conical
shape of the Holtite
®
contact sizes the plated-thru hole when pressed into
place. The precision-machined geometry allows for the controlled
displacement of plated material without damaging the hole, or affecting the
normal mechanical and electrical contact performance.
• Lowest socket profile
The profile of the printed wiring board with the Holtite
®
contact
installed is less than the length of the IC or component lead,
offering the lowest socketing profile, permitting card rack spacing
as low as .400", identical to that of direct soldering.
• Precision-machined, tapered-entry, four finger contact
The underlying contact design used in the Holtite
®
system has a
proven record of reliability after more than fifteen years' usage in
both commercial and military applications.
• Retains minimum component lead lengths
The socketing technique provides the shortest distance between the
component seating plane and the contact engagement zone for
maximum retention of short component leads.
• Maximum heat dissipation
Open contact design permits air flow through the board,
increasing heat dissipation and extending component life.
• Solderless, gas-tight, press-fit insertion
The solderless, pluggable system saves the time and cost of
soldering, plus eliminating the potential for heat damage, warpage
and corrosive residue contamination..
• Removes artwork design restrictions
Use of the Holtite
®
solderless system removes certain artwork
restrictions necessary for wave soldering and solder joint
construction. Line spacing can be made as tight as electrical
parameters allow without solder bridging or the need for
soldermask. Terminal areas can be reduced in diameter without the
need of a base for solder fillets. Ground plane areas can be increased
without concern for heat-induced warpage.
• Immediate conversion to the Holtite
®
system
Existing printed wiring designs can be converted by simply
changing the drilled hole diameter prior to plating.
MATERIAL SPECIFICATIONS:
Carrier Strip .................. Mylar
Contact .......................... Beryllium copper
Finish ..............................Gold or tin/lead plated
Zero Profile Solderless DIP Sockets on Reel
%-
&.
$%,-HI
&'./@AKL
$%HI
&@JK
B Dim.
Contact Area Dia.
A Dim.
Finished Hole Dia.
C Dim.
Max.
Profile
Plated
Thru Hole
Glass
Epoxy
Substrate
322-HCS5P2-314
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................Passed MIL-STD-202, Method 204, 20 G’s
Durability ...................... Passed MIL-STD-1344, Method 2016, 50 cycles
Insertion Force .............. 92 Grams (3.2 oz.) average with a .018" (0,46)
pol. steel pin and .043" (1,09) plated thru hole
Withdrawal Force ..........103 Grams (3.6 oz.) average with a .018" (0,46)
pol. steel pin and .043" (1,09) plated thru hole
Contact Retention
in Board ..................... 5 Lb. minimum
ELECTRICAL
Contact Resistance ........ 10 Milliohms max.
Contact Rating .............. 3 Amps
ENVIRONMENTAL
Humidity ........................Passed MIL-STD-202, Method 106
Thermal Shock .............. Passed MIL-STD-202, Method 107, Cond. F
Operation Temp. ............Gold contact -55°C to +125°C,
Tin/lead contact -55°C to +105°C
