M32159B07MTP - Vishay Presicion Group

RCWPM Jumper (Military M32159)

www.vishay.com Vishay Dale

Revision: 12-Jul-12 1Document Number: 31028

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thick Film Chip Resistors, Zero Ohm Jumper, Military/Established

Reliability MIL-PRF-32159 Qualified, Type RCZ

FEATURES

• Fully conforms to the requirements of

MIL-PRF-32159

• Established reliability - verified failure rate; M level

• Operating temperature range is - 55 °C to + 150 °C

• 100 % group A screening per MIL-PRF-32159

• Termination style B - tin/lead wraparound over nickel

barrier

• For MIL-PRF-55342 chip resistors, see Vishay Dale’s

RCWPM (Military M/D55342) datasheet

(www.vishay.com/doc?31010)

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Notes

• DSCC has created a series of drawings to support the need for zero ohm jumper product. Vishay Dale is listed as a resource on these

drawings as follows:

These drawings can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg.

(1) MIL case size 0705 and EIA case size 0805 are dimensionally the same.

STANDARD ELECTRICAL SPECIFICATIONS

VISHAY DALE

MODEL

MIL-PRF-32159

STYLE

MIL SPEC.

SHEET TERM. CASE

SIZE

POWER RATING

P70 °C

CURRENT

RATING

MAXIMUM

RESISTANCE



RCWPM-0502-99 RCZ0502 01 B 0502 0.05 1.3 30m

RCWPM-550-99 RCZ0505 02 B 0505 0.100 2.2 20m

RCWPM-5100-99 RCZ1005 03 B 1005 0.20 2.8 25m

RCWPM-5150-99 RCZ1505 04 B 1505 0.15 2.1 35m

RCWPM-7225-99 RCZ2208 05 B 2208 0.225 2.5 35m

RCWPM-575-99 RCZ0705 06 B 0705 (1) 0.15 2.7 20m

RCWPM-1206-99 RCZ1206 07 B 1206 0.25 3.2 25m

RCWPM-2010-99 RCZ2010 08 B 2010 0.80 5.7 25m

RCWPM-2512-99 RCZ2512 09 B 2512 1.0 6.3 25m

RCWPM-1100-99 RCZ1010 10 B 1010 0.50 5.0 20m

RCWPM-0402-99 RCZ0402 11 B 0402 0.04 1.2 30m

RCWPM-0603-99 RCZ0603 12 B 0603 0.07 1.5 30m

RCWPM-0302-99 RCZ0302 13 B 0302 0.035 1.1 30m

DSCC

DRAWING

NUMBER

VISHAY DALE

MODEL TERM.

MAXIMUM

RESISTANCE

m

MAX. CURRENT

RATING

MAXIMUM WORKING

VOLTAGE

03011 RCWPM0201..99 B 50 0.5 30

03012 RCWPM0302..99 B 20 1.1 15

03014 RCWPM0402..99 B 25 1.2 30

88032 RCWPM0502..99 B 20 1.3 40

03013 RCWPM0603..99 B 25 1.5 50

03002 RCWPM0550..99 B 25 2.2 40

90048 RCWPM0575..99 B 20 2.7 50

90049 RCWPM5100..99 B 30 2.8 75

94011 RCWPM1206..99 B 20 3.2 100

90092 RCWPM5150..99 B 40 2.1 125

87011 RCWPM1100..99 B 20 5.0 75

90047 RCWPM7225..99 B 40 2.5 175

03015 RCWPM2010..99 B 40 5.7 150

03016 RCWPM2512..99 B 40 6.3 200

RCWPM Jumper (Military M32159)

www.vishay.com Vishay Dale

Revision: 12-Jul-12 2Document Number: 31028

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543).

(1) Tape and Reel packaging with plastic tape standard for all case sizes except 0201. For the 0201 case size, the product is only offered in

Tape and Reel packaging with paper tape.

GLOBAL PART NUMBER INFORMATION

Part Number (MIL-PRF-32159): M32159B02MWB (preferred part number format)

MIL STYLE TERMINATION

STYLE SPEC SHEET FAILURE RATE PACKAGING

M32159 B = Pre-tinned

nickel barrier,

wraparound

(see Standard

Electrical

Specifications

table)

C = Non-ER

M = Military grade,

high reliability

TP = Tin/lead, T/R (full)

S3 = Tin/lead, T/R (1000 pieces)

UL = Tin/lead, T/R, single lot date code

WB = Tin/lead, waffle tray

WL = Tin/lead, waffle tray, single lot date code

S2 = Tin/lead, T/R (500 pieces)

S6 = Tin/lead, T/R (300 pieces)

Part Number (DSCC Drawings): RCWPM5100WB99

GLOBAL MODEL PACKAGING (1) SPECIAL

RCWPM0201

RCWPM0302

RCWPM0402

RCWPM0502

RCWPM0550

RCWPM0575

RCWPM0603

RCWPM1100

RCWPM1206

RCWPM2010

RCWPM2512

RCWPM5100

RCWPM5150

RCWPM7225

TP = Tin/lead, T/R (full)), plastic tape

S3 = Tin/lead, T/R (1000 pieces), plastic

tape

UL = Tin/lead, T/R, single lot date code

WB = Tin/lead, waffle tray

WL = Tin/lead, waffle tray,

single lot date code

S2 = Tin/lead, T/R (500 pieces), plastic tape

S6 = Tin/lead, T/R (300 pieces), plastic tape

UA = Tin/lead, T/R (full), paper tape

UD = Tin/lead, T/R (1000 pieces),

paper tape

UC = Tin/lead, T/R (500 pieces),

paper tape

UB = Tin/lead, T/R (300 pieces),

paper tape

99 = 0  Jumper

DIMENSIONS in inches (millimeters)

VISHAY DALE 

MODEL MIL-PRF-32159

STYLE

MIL.

SPEC.

SHEET

(LENGTH) B

(WIDTH) C

(HEIGHT) D

(TOP TERM) E

(BOTTOM TERM)

RCWPM-0502-99 RCZ0502 01 0.055 ± 0.005

(1.40 ± 0.13) 0.023 ± 0.003

(0.58 ± 0.08) 0.015 ± 0.003

(0.38 ± 0.08) 0.010 ± 0.005

(0.25 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-550-99 RCZ0505 02 0.055 ± 0.005

(1.40 ± 0.13) 0.050 ± 0.005

(1.27 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.010 ± 0.005

(0.25 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5100-99 RCZ1005 03 0.105 ± 0.005

(2.67 ± 0.13) 0.050 ± 0.005

(1.27 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5150-99 RCZ1505 04 0.155 ± 0.005

(3.94 ± 0.13) 0.050 ± 0.005

(1.27 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-7225-99 RCZ2208 05 0.230 ± 0.005

(5.84 ± 0.13) 0.075 ± 0.005

(1.91 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-575-99 RCZ0705 06 0.080 ± 0.005

(2.03 ± 0.13) 0.050 ± 0.005

(1.27 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.016 ± 0.008

(0.41 ± 0.20) 0.015 ± 0.005

(0.38 ± 0.13)

32159B02MMWB

CWPM5100RWB 99

RCWPM Jumper (Military M32159)

www.vishay.com Vishay Dale

Revision: 12-Jul-12 3Document Number: 31028

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



RCWPM-1206-99 RCZ1206 07 0.125 ± 0.005

(3.18 ± 0.13) 0.063 ± 0.005

(1.60 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-2010-99 RCZ2010 08 0.197 ± 0.006

(5.00 ± 0.15) 0.098 ± 0.005

(2.49 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-2512-99 RCZ2512 09 0.250 ± 0.006

(6.35 ± 0.15) 0.124 ± 0.005

(3.15 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-1100-99 RCZ1010 10 0.105 ± 0.005

(2.67 ± 0.13) 0.100 ± 0.005

(2.54 ± 0.13) 0.020 ± 0.005

(0.51 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0402-99 RCZ0402 11 0.039 ± 0.003

(0.99 ± 0.08) 0.020 ± 0.003

(0.51 ± 0.08) 0.013 ± 0.003

(0.33 ± 0.08) 0.010 ± 0.005

(0.25 ± 0.13) 0.010 ± 0.005

(0.25 ± 0.13)

RCWPM-0603-99 RCZ0603 12 0.063 ± 0.005

(1.60 ± 0.13) 0.032 ± 0.005

(0.81 ± 0.13) 0.018 ± 0.005

(0.46 ± 0.13) 0.012 ± 0.005

(0.30 ± 0.13) 0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0302-99 RCZ0302 13 0.034 ± 0.004

(0.86 ± 0.10) 0.021 ± 0.003

(0.53 ± 0.08) 0.013 ± 0.003

(0.33 ± 0.08) 0.007 ± 0.005

(0.18 ± 0.13) 0.008 ± 0.005

(0.20 ± 0.13)

RCWPM-0201-99 0.024 ± 0.002

(0.61 ± 0.05) 0.012 ± 0.002

(0.30 ± 0.05) 0.009 ± 0.002

(0.23 ± 0.05) 0.006 ± 0.003

(0.15 ± 0.08) 0.006 + 0.002 - 0.004

(0.15 + 0.05 - 0.10)

DIMENSIONS in inches (millimeters)

VISHAY DALE 

MODEL MIL-PRF-32159

STYLE

MIL.

SPEC.

SHEET

(LENGTH) B

(WIDTH) C

(HEIGHT) D

(TOP TERM) E

(BOTTOM TERM)

DERATING CURVE

- 55 - 25 75 100 125 150 175

120

100

Ambient Temperature in °C

Rated Power in %

05025

CAGE CODE: 91637 and SH903

MECHANICAL SPECIFICATIONS

Resistive element Conductive metal

Encapsulation Epoxy

Substrate 96 % alumina

Termination Solder-coated nickel barrier

Solder finish Tin/lead solder alloy

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.