ATF-36163 1.5 -18 GHz Surface Mount Pseudomorphic HEMT Data Sheet Description Features The Avago ATF-36163 is a low-noise Pseudomorphic High Electron Mobility Transistor (PHEMT), in the SOT-363 (SC70) package. When optimally matched for minimum noise figure, it will provide a noise figure of 1 dB at 12 GHz and 0.6 dB at 4 GHz. * Lead-free Option Available Additionally, the ATF-36163 has low noise-resistance, which reduces the sensitivity of noise performance to variations in input impedance match. This feature makes the design of broad band low noise amplifiers much easier. The performance of the ATF-36163 makes this device the ideal choice for use in the 2nd or 3rd stage of low noise cascades. The repeatable performance and consistency make it appropriate for use in Ku-band Direct Broadcast Satellite (DBS) TV systems, C-band TV Receive Only (TVRO) LNAs, Multichannel Multipoint Distribution Systems (MMDS), X-band Radar detector and other low noise amplifiers operating in the 1.5 -18 GHz frequency range. This GaAs PHEMT device has a nominal 0.2 micron gate length with a total gate periphery (width) of 200 microns. Proven gold-based metallization system and nitride passivation assure rugged, reliable devices. * Associated Gain: 9.4 dB Typical at 12 GHz 15.8 dB Typical at 4 GHz * Maximum Available Gain: 11 dB Typical at 12 GHz 17 dB Typical at 4 GHz * Low Cost Surface Mount Small Plastic Package * Tape-and-Reel Packaging Option Available Applications * 12 GHz DBS Downconverters * 4 GHz TVRO Downconverters * S or L Band Low Noise Amplifiers Pin Connections and Package Marking SOURCE SOURCE GATE 36x Surface Mount Package SOT-363 (SC-70) * Low Minimum Noise Figure: 1 dB Typical at 12 GHz 0.6 dB Typical at 4 GHz DRAIN SOURCE SOURCE Note: Top View. Package marking provides orientation and identification. " 36 " = Device code ATF-36163 Pin Conn " x " = Data code character ATF-36163 Pkg Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control. ATF-36163 Absolute Maximum Ratings[1] Symbol Parameter Units VDS Drain - Source Voltage V Absolute Maximum +3 VGS Gate - Source Voltage V -3 VGD Gate Drain Voltage V -3.5 ID Drain Current mA Idss PT Total Power Dissipation mW 180 RF Input Power Pin max dBm +10 TCH Channel Temperature C 150 TSTG Storage Temperature C -65 to 150 Thermal Resistance: ch-c = 160C/W Note: 1. Operation of this device above any one of these parameters may cause permanent damage. ATF-36163 Electrical Specifications TC = 25C, ZO = 50 , Vds = 1.5 V, Ids = 10 mA, (unless otherwise noted). Symbol Parameters and Test Conditions NF Noise Figure[1] G Gain at NF[1] gm Transconductance Idss f =12.0 GHz Saturated Drain Current Vp 10% Pinchoff Voltage BVGDO Gate Drain Breakdown Voltage Units Typ. Max. dB Min. 1.2 1.4[1] f = 12.0 GHz dB 9 10 VDS = 1.5 V, VGS = 0 V mS 50 60 VDS = 1.5 V, VGS = 0 V mA 15 25 40 V -1.0 -0.35 -0.15 VDS = 1.5 V, IDS = 10% of Idss IG = 30 A V -3.5 Note: 1. Measured in a test circuit tuned for a typical device. ATF-36163 Typical Parameters TC = 25C, ZO = 50 , Vds = 2 V, Ids = 15 mA, (unless otherwise noted). Symbol Units Typ. Fmin Minimum Noise Figure (source = opt) f = 4 GHz f = 12 GHz dB dB 0.6 1.0 Ga Associated Gain f = 4 GHz f = 12 GHz dB dB 15.8 9.4 Gmax Maximum Available Gain[1] f = 4 GHz f = 12 GHz dB dB 17.2 10.9 P1dB Output Power at 1 dB Gain Compression under the power matched condition f = 4 GHz f = 12 GHz dBm dBm 5 5 Gate to Source Voltage for IDS = 15 mA VDS = 2.0 V V -0.2 VGS Parameters and Test Conditions Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1, which is shown on the S-parameters tables. ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 1.5 V, ID = 10 mA 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.99 0.98 0.96 0.93 0.87 0.81 0.75 0.67 0.61 0.57 0.57 0.59 0.63 0.67 0.72 0.78 0.82 0.87 0.90 -11 -22 -42 -61 -83 -106 -131 -158 176 143 108 76 50 26 6 -11 -24 -38 -52 12.85 12.70 12.48 12.37 12.30 12.16 11.94 11.47 11.01 10.47 9.66 8.53 7.39 6.10 4.81 3.49 2.20 0.59 -1.63 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 4.39 4.31 4.21 4.15 4.12 4.06 3.95 3.75 3.55 3.34 3.04 2.67 2.34 2.02 1.74 1.50 1.29 1.07 0.83 0.01 0.03 0.05 0.07 0.10 0.12 0.13 0.15 0.15 0.16 0.16 0.15 0.14 0.12 0.10 0.09 0.07 0.06 0.04 168 158 138 118 97 76 55 33 12 -10 -32 -54 -74 -93 -111 -128 -146 -164 178 -37.72 -31.70 -26.02 -22.73 -20.45 -18.71 -17.52 -16.77 -16.36 -15.97 -15.92 -16.48 -17.14 -18.27 -19.74 -21.41 -23.10 -25.04 -29.12 79 71 55 40 23 6 -12 -30 -45 -61 -77 -93 -106 -119 -129 -138 -144 -151 -159 Common Source, ZO = 50 , VDS = 1.5 V, ID = 10 mA Freq. GHz Fmin dB Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.48 0.53 0.57 0.61 0.66 0.71 0.77 0.83 0.89 0.97 1.05 1.14 1.24 1.37 1.51 1.68 1.89 18.77 16.75 15.17 14.14 13.23 12.06 11.22 10.50 10.02 9.44 8.92 8.45 8.12 8.08 8.11 7.97 7.59 opt Mag. Ang. 0.78 0.75 0.68 0.60 0.55 0.48 0.38 0.32 0.23 0.18 0.20 0.26 0.36 0.48 0.59 0.64 0.70 28 41 55 71 88 105 119 138 170 -141 -92 -46 -16 4 19 34 51 Rn/ZO 0.38 0.32 0.26 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.15 -9 -18 -36 -53 -71 -92 -116 -144 174 93 53 28 9 -8 -22 -33 -43 -53 -65 Gmax[1] dB 0.11 0.17 0.24 0.33 0.43 0.51 0.58 0.69 0.79 0.85 0.91 0.99 1.07 1.18 1.30 1.38 1.44 1.46 1.80 25.24 22.26 19.28 17.56 16.38 15.43 14.73 14.12 13.69 13.22 12.80 12.50 10.65 9.64 8.99 8.81 8.70 8.79 8.58 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 1. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA. 24 ATF-36163 fig 1 20 16 GAIN (dB) ATF-36163 Typical Noise Parameters Fmin (dB) Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1. 0.51 0.50 0.48 0.45 0.40 0.34 0.27 0.18 0.10 0.12 0.22 0.33 0.41 0.49 0.56 0.63 0.67 0.73 0.78 K -- Ga (dB) Freq. S11 GHz Mag. Ang. dB MSG MAG 12 |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 2. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA. ATF-36163 fig 2 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 1.5 V, ID = 15 mA 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.99 0.98 0.96 0.92 0.86 0.80 0.74 0.66 0.59 0.56 0.56 0.59 0.63 0.68 0.73 0.79 0.83 0.87 0.91 -12 -22 -43 -63 -85 -108 -133 -160 173 141 106 74 49 25 5 -12 -25 -38 -53 13.56 13.40 13.16 13.00 12.87 12.68 12.38 11.85 11.33 10.74 9.89 8.74 7.59 6.29 5.01 3.70 2.43 0.84 -1.33 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 4.76 4.68 4.55 4.47 4.40 4.30 4.16 3.91 3.68 3.44 3.12 2.74 2.40 2.06 1.78 1.53 1.32 1.10 0.86 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.14 0.14 0.15 0.15 0.14 0.14 0.12 0.10 0.09 0.07 0.06 0.04 168 157 137 116 96 75 53 31 11 -11 -33 -54 -74 -93 -110 -127 -144 -163 180 -38.42 -32.40 -26.56 -23.22 -21.01 -19.25 -18.13 -17.39 -16.95 -16.54 -16.42 -16.83 -17.39 -18.42 -19.74 -21.31 -22.85 -24.73 -28.87 Common Source, ZO = 50 , VDS = 1.5 V, ID = 15 mA Freq. GHz Fmin dB Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.49 0.54 0.58 0.63 0.68 0.73 0.79 0.85 0.91 0.99 1.07 1.17 1.27 1.40 1.54 1.72 1.93 18.87 17.20 15.75 14.49 13.61 12.36 11.54 10.82 10.32 9.73 9.22 8.68 8.41 8.36 8.37 8.10 8.00 opt Mag. Ang. 0.84 0.74 0.66 0.59 0.54 0.46 0.37 0.30 0.21 0.17 0.20 0.26 0.38 0.49 0.60 0.62 0.71 28 42 57 72 90 106 121 140 174 -133 -83 -40 -12 7 21 35 52 Rn/ZO 0.38 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.08 0.10 0.14 0.22 0.34 0.46 0.64 0.85 1.18 0.45 0.45 0.43 0.40 0.35 0.28 0.21 0.13 0.06 0.12 0.23 0.34 0.42 0.50 0.57 0.64 0.68 0.73 0.78 -9 -18 -36 -52 -70 -92 -116 -146 156 73 44 23 6 -10 -23 -34 -44 -54 -66 Gmax[1] dB 0.12 0.18 0.26 0.35 0.46 0.55 0.62 0.74 0.84 0.90 0.95 1.03 1.10 1.19 1.29 1.35 1.39 1.39 1.67 25.82 22.86 19.87 18.13 16.94 15.98 15.25 14.62 14.14 13.63 13.16 11.78 10.62 9.72 9.15 8.99 8.93 9.06 8.92 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 3. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA. 24 ATF-36163 fig 3 20 16 GAIN (dB) ATF-36163 Typical Noise Parameters Fmin (dB) Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1. 79 71 56 40 24 7 -11 -28 -42 -58 -73 -88 -102 -115 -124 -133 -139 -148 -155 K -- Ga (dB) Freq. S11 GHz Mag. Ang. dB MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 4. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA. ATF-36163 fig 4 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 2.0 V, ID = 10 mA Freq. S11 GHz Mag. Ang. dB 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.99 0.99 0.96 0.93 0.87 0.81 0.75 0.67 0.60 0.57 0.56 0.58 0.62 0.67 0.72 0.78 0.82 0.87 0.91 -11 -22 -42 -62 -83 -106 -131 -157 176 144 109 77 50 26 6 -10 -24 -37 -52 13.06 12.90 12.69 12.57 12.51 12.38 12.15 11.70 11.25 10.73 9.95 8.86 7.75 6.49 5.24 3.96 2.68 1.08 -1.16 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 4.50 4.42 4.31 4.25 4.22 4.16 4.05 3.84 3.65 3.44 3.14 2.77 2.44 2.11 1.83 1.58 1.36 1.13 0.88 0.01 0.03 0.05 0.07 0.09 0.11 0.13 0.14 0.15 0.15 0.15 0.15 0.14 0.12 0.10 0.08 0.07 0.06 0.04 168 158 138 118 97 76 55 33 13 -10 -32 -53 -73 -93 -110 -128 -146 -165 177 -37.72 -32.04 -26.38 -22.97 -20.72 -18.94 -17.79 -17.08 -16.65 -16.25 -16.25 -16.77 -17.39 -18.56 -19.91 -21.51 -23.10 -24.88 -28.64 79 71 56 40 23 6 -12 -30 -44 -60 -76 -91 -104 -117 -126 -134 -139 -147 -153 0.55 0.55 0.53 0.50 0.44 0.38 0.31 0.21 0.13 0.10 0.18 0.29 0.37 0.46 0.53 0.60 0.65 0.71 0.78 -9 -18 -35 -52 -70 -90 -112 -137 -168 115 61 32 12 -5 -19 -30 -40 -50 -63 K - Gmax[1] dB 0.11 0.16 0.24 0.32 0.42 0.51 0.58 0.69 0.79 0.85 0.91 1.00 1.08 1.19 1.31 1.38 1.42 1.38 1.63 25.46 22.46 19.50 17.77 16.61 15.67 14.98 14.38 13.96 13.50 13.10 12.52 10.82 9.85 9.24 9.07 9.03 9.28 9.06 Freq. GHz Fmin dB Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.46 0.50 0.54 0.59 0.63 0.68 0.74 0.80 0.86 0.94 1.02 1.11 1.22 1.35 1.51 1.69 1.92 18.60 16.75 15.55 14.20 13.37 12.12 11.35 10.59 10.11 9.57 9.08 8.59 8.30 8.29 8.32 8.07 7.68 opt Mag. Ang. 0.84 0.76 0.67 0.61 0.55 0.49 0.39 0.33 0.23 0.17 0.18 0.24 0.34 0.47 0.58 0.60 0.66 28 41 56 70 88 103 118 135 165 -145 -93 -47 -16 5 19 34 50 Rn/ZO 0.38 0.31 0.25 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.12 0.19 0.30 0.42 0.57 0.76 1.10 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 Ga (dB) Common Source, ZO = 50 , VDS = 2.0 V, ID = 10 mA 0 10 12 14 16 18 FREQUENCY (GHz) Figure 5. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA. 24 ATF-36163 fig 5 20 16 GAIN (dB) ATF-36163 Typical Noise Parameters Fmin (dB) Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1. MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 6. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA. ATF-36163 fig 6 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 2 V, ID = 15 mA 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.99 0.98 0.96 0.92 0.86 0.79 0.73 0.65 0.59 0.55 0.56 0.58 0.63 0.68 0.73 0.78 0.83 0.88 0.91 -12 -22 -43 -63 -85 -108 -133 -160 173 141 107 75 49 26 6 -11 -24 -38 -52 13.85 13.70 13.45 13.29 13.16 12.96 12.67 12.13 11.63 11.06 10.23 9.11 8.00 6.75 5.49 4.22 2.99 1.42 -0.79 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 4.93 4.84 4.70 4.62 4.55 4.45 4.30 4.04 3.81 3.57 3.25 2.86 2.51 2.17 1.88 1.63 1.41 1.18 0.91 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.13 0.14 0.14 0.15 0.14 0.13 0.12 0.10 0.09 0.07 0.06 0.04 168 157 137 117 96 75 53 32 11 -11 -32 -53 -73 -92 -110 -127 -145 -164 178 -38.42 -32.40 -26.74 -23.48 -21.31 -19.58 -18.42 -17.72 -17.27 -16.83 -16.77 -17.14 -17.72 -18.71 -20.00 -21.41 -22.73 -24.44 -27.96 79 71 56 40 24 7 -10 -28 -42 -57 -72 -87 -99 -112 -121 -129 -135 -143 -149 Fmin (dB) Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1. ATF-36163 Typical Noise Parameters Common Source, ZO = 50 , VDS = 2.0 V, ID = 15 mA Fmin dB Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.48 0.52 0.56 0.61 0.65 0.70 0.76 0.82 0.88 0.95 1.03 1.12 1.23 1.35 1.49 1.65 1.86 18.97 17.27 15.75 14.54 13.68 12.47 11.66 10.94 10.44 9.88 9.38 8.90 8.63 8.59 8.63 8.68 8.32 opt Mag. Ang. 0.83 0.74 0.67 0.60 0.55 0.46 0.37 0.31 0.21 0.15 0.18 0.25 0.36 0.48 0.58 0.65 0.70 28 41 56 71 89 104 118 136 168 -137 -85 -41 -13 7 20 34 51 Rn/ZO 0.37 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.10 -9 -18 -35 -52 -69 -90 -112 -136 -171 93 51 27 9 -7 -20 -31 -41 -51 -63 Gmax[1] dB 0.12 0.17 0.26 0.35 0.46 0.55 0.62 0.75 0.84 0.90 0.96 1.04 1.11 1.20 1.30 1.35 1.36 1.31 1.50 26.10 23.11 20.13 18.40 17.22 16.26 15.54 14.93 14.46 13.95 13.50 11.93 10.85 10.00 9.45 9.30 9.31 9.56 9.44 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 7. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2 V, ID = 15 mA. 24 ATF-36163 fig 7 20 16 GAIN (dB) Freq. GHz 0.51 0.50 0.48 0.45 0.40 0.33 0.26 0.17 0.09 0.09 0.19 0.30 0.38 0.47 0.54 0.61 0.66 0.72 0.78 K - Ga (dB) Freq. S11 GHz Mag. Ang. dB MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 8. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2 V, ID = 15 mA. ATF-36163 fig 8 ATF-36163 Typical "Off" Scattering Parameters, Common Source, ZO = 50 , VDS = 0 V, VGS = 0 V Freq. S11 GHz Mag. Ang. dB 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.998 0.993 0.99 0.98 0.96 0.94 0.92 0.89 0.86 0.84 0.83 0.83 0.85 0.86 0.87 0.90 0.93 0.93 0.93 -10 -20 -37 -55 -74 -95 -118 -142 -168 162 128 94 64 36 12 -8 -24 -39 -53 -46.02 -39.17 -32.77 -28.64 -25.35 -22.62 -20.45 -18.79 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.14 -18.71 -20.45 -23.35 -27.96 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 0.01 0.01 0.02 0.04 0.05 0.07 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 0.01 0.01 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 80 81 75 67 56 42 27 11 -6 -24 -44 -64 -83 -101 -116 -129 -140 -154 -161 -46.02 -39.17 -32.77 -28.64 -25.19 -22.50 -20.45 -18.71 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.08 -18.71 -20.45 -23.10 -28.18 86 83 76 68 57 42 27 11 -5 -24 -44 -64 -83 -101 -115 -129 -140 -152 -161 0.703 0.701 0.70 0.71 0.73 0.74 0.75 0.77 0.78 0.81 0.83 0.84 0.85 0.87 0.89 0.89 0.90 0.90 0.90 170 160 139 119 99 81 63 46 30 16 3 -10 -22 -34 -44 -53 -62 -71 -81 ATF-36163 Typical "Off" Scattering Parameters, Common Source, ZO = 50 , VDS = 2.0 V, VGS = -1.5 V Freq. S11 GHz Mag. Ang. dB 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0.97 0.98 0.99 0.98 0.97 0.96 0.94 0.92 0.89 0.85 0.79 0.74 0.72 0.71 0.75 0.82 0.89 0.91 0.92 -8 -16 -30 -43 -57 -72 -87 -103 -119 -136 -158 177 149 114 74 35 5 -21 -42 -34.89 -28.87 -22.85 -19.33 -16.71 -14.42 -12.62 -10.90 -9.60 -8.09 -6.73 -5.85 -5.71 -6.54 -8.95 -12.80 -18.49 -24.88 -27.54 S21 Mag. Ang. dB S12 S22 Mag. Ang. Mag. Ang. 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.29 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.28 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 82 74 59 44 29 14 -2 -20 -37 -56 -79 -106 -136 -170 155 123 94 79 70 -34.89 -28.87 -22.97 -19.33 -16.71 -14.47 -12.65 -10.96 -9.63 -8.09 -6.73 -5.87 -5.71 -6.52 -8.92 -12.69 -18.20 -24.44 -27.96 81 73 59 44 30 14 -2 -20 -37 -56 -79 -106 -136 -170 156 123 95 84 69 0.999 0.998 0.995 0.98 0.97 0.95 0.94 0.92 0.89 0.83 0.79 0.75 0.73 0.74 0.79 0.85 0.90 0.91 0.90 -7 -14 -29 -43 -57 -74 -91 -107 -125 -148 -174 156 123 86 50 18 -8 -30 -50 1.9 dB 1.4 dB 1.3 dB 1.2 dB 1.1 dB 9.5 dB 10.5 dB 11.5 dB Figure 9. Smith Chart with Noise Figure and Available Gain Circles at 12 GHz, VDS = 1.5 V, ID = 10 mA. Phase Reference Planes SOT-363 PCB Layout figplanes 9 The positions of theATF-36163 reference used to measure SParameters and to specify opt for the Noise Parameters are shown in Figure 10. As seen in the illustration, the reference planes are located at the extremities of the package leads. A PCB pad layout for the miniature SOT-363 (SC-70) package used by the ATF-36163 is shown in Figure 11 (dimensions are in inches). This layout provides ample allowance for package placement by automated assembly equipment. The layout is shown with a nominal SOT-363 package footprint superimposed on the PCB. REFERENCE PLANES pads. 0.026 TEST CIRCUIT 0.079 Figure 10. Reference Planes. 0.039 MGA-86563 fig 11 0.018 Dimensions in inches. Figure 11. Recommended PCB Pad Layout for Avago's SC70 6L/SOT-363 Products (Dimensions in Inches). Package Dimensions SC-70 6L/SOT-363 HE E e D Q1 A2 A c A1 L b DIMENSIONS (mm) SYMBOL E D HE A A2 A1 Q1 e b c L MIN. 1.15 1.80 1.80 0.80 0.80 0.00 0.10 MAX. 1.35 2.25 2.40 1.10 1.00 0.10 0.40 0.650 BCS 0.15 0.10 0.10 0.30 0.20 0.30 NOTES: 1. All dimensions are in mm. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. All specifications comply to EIAJ SC70. 5. Die is facing up for mold and facing down for trim/form, ie: reverse trim/form. 6. Package surface to be mirror finish. Part Number Ordering Information Part Number No. of Devices Container ATF-36163-TR1G 3000 7" Reel ATF-36163-TR2G 10000 13" Reel ATF-36163-BLKG 100 antistatic bag Device Orientation TOP VIEW REEL END VIEW 4 mm 8 mm 36 CARRIER TAPE 36 36 36 USER FEED DIRECTION COVER TAPE Tape Dimensions and Product Orientation For Outline 63 P P2 ATF-36163 Tape - Device Orientation D P0 ATF-36163 Device Orientation E F W C D1 t1 (CARRIER TAPE THICKNESS) K0 10 MAX. A0 DESCRIPTION Tt (COVER TAPE THICKNESS) 10 MAX. B0 SYMBOL SIZE (mm) SIZE (INCHES) CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A0 B0 K0 P D1 2.40 0.10 2.40 0.10 1.20 0.10 4.00 0.10 1.00 + 0.25 0.094 0.004 0.094 0.004 0.047 0.004 0.157 0.004 0.039 + 0.010 PERFORATION DIAMETER PITCH POSITION D P0 E 1.55 0.10 4.00 0.10 1.75 0.10 0.061 + 0.002 0.157 0.004 0.069 0.004 CARRIER TAPE WIDTH THICKNESS W t1 8.00 + 0.30 - 0.10 0.254 0.02 0.315 + 0.012 0.0100 0.0008 COVER TAPE WIDTH TAPE THICKNESS C Tt 5.40 0.10 0.062 0.001 0.205 + 0.004 0.0025 0.0004 DISTANCE CAVITY TO PERFORATION (WIDTH DIRECTION) F 3.50 0.05 0.138 0.002 CAVITY TO PERFORATION (LENGTH DIRECTION) P2 2.00 0.05 0.079 0.002 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5989-1915EN AV02-1441EN - July 29, 2008