57mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA23-11GWA Green Features Description z 2.3 inch digit height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Multicolor available. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 Selection Guide Part No. Dice SA23-11GWA Iv (ucd) [1] @ 10mA Lens Type Green (GaP) Min. Typ. 31000 65000 *9000 *20000 White Diffused Description Common Anode, Rt. Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Green 8.8 (4.4) 10.0 (5.0) V IF=20mA IR Reverse Current (Per Chip) Green 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation (DP) 250 (125) mW DC Forward Current (DP) 25 (25) mA Peak Forward Current [1] (DP) 140 (140) mA 5 (5) V Reverse Voltage (Per Chip) Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 Green SA23-11GWA SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 PACKING & LABEL SPECIFICATIONS SA23-11GWA SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0648 REV NO: V.1A DATE: JUN/24/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000222 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: SA23-11GWA