CUSTOMER DRAWING
Tyco El ectronics
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
TITLE: FERRULE AND HEAT-SHRINKABLE
SLEEVE FOR HEXASHIELD ADAPTORS
Unless otherwise specified dimensions are in
millimeters.
[Inches dimensions are shown in brackets] Raychem DOCUMENT NO.: HET-A-03X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV: A DATE: 11-May-07
DRAWN BY:
K.YEE CAGE CODE:
06090 REPLACES:
D030534 ECO NUMBER:
07-010934 SCALE: NTS SIZE:
A SHEET: 1 of 1
© 2006-2007 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. FERRULE: Copper alloy with a suitable plating (see below for plating information).
3. SEALING SLEEVE:
- Heat-shrinkable insulation sleeve, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
- Meltable sealing rings: Fluorocarbon-based thermoplastic.
APPLICATION
1. These parts are used on Tyco Electronics/Raychem Hexashield adaptors.
2. Cable Type: Single or multi-conductors unshielded cable.
3. Temperature range: -65°C to +175°C.
4. For all other application, contact Tyco Electronics/Raychem technical service.
Cable dimensions:
øA max. = 4.2mm
PART NUMBERING
HET-A-03X
Ferrule Plating:
B: Olive drab cadmium in accordance with SAE-AMS-QQ-P-416, over a suitable underplate to withstand
500 hours of salt spray test
C: Electroless nickel conforming to SAE-AMS-C-26074 Class 3, Grade B.
INSTALLATION
See Tyco Electronics/Raychem installation procedure RPIP-696-03.
