ULN2803A - Sanken Electric - Product.Network

CSC

www.vishay.com Vishay Dale

Revision: 03-May-13 1Document Number: 31509

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thick Film Resistor Networks, Single-In-Line,

Conformal Coated SIP

FEATURES

• Isolated, bussed and dual terminator

schematics available

• Body height: “A” profile = 0.195" (4.95 mm) and

“B” profile = 0.295" (7.50 mm) standard; custom

“C” profile = 0.350" (8.89 mm) also available

• “A” profile standard in 4 thru 12 pins

• Thick film resistive elements

• Reduces total assembly costs

• Resistor elements protected by tough epoxy conformal

coating

• Wide resistance range (10  to 2.2 M)

• Available in bulk pack as standard; optional tube pack is

also available

• Meets EIA/ECA-CB23 rev. G whisker test requirements for

class 1A products

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and/or parts that are non-RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information/tables in this datasheet for details.

Notes

• See derating curves for package power rating

(1) For resistor power ratings at + 25 °C see derating curves

(2) ± 2 % standard, ± 1 % and ± 5 % available

(3) Continuous working voltage shall be or maximum working voltage, whichever is less

Available

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL/

SCHEMATIC

PACKAGE

HEIGHT

POWER RATING

ELEMENT (1)

P70 °C W

RESISTANCE

RANGE



TEMPERATURE

COEFFICIENT

(- 55 °C to + 125 °C)

± ppm/°C

TOLERANCE (2)

± %

TEMP.

COEFFICIENT

TRACKING (1)

(- 55 °C to + 125 °C)

± ppm/°C

MAX.

WORKING

VOLTAGE (3)

VDC

CSCxxx01

A0.20

10 to 50 250

1, 2, 5 50 100

50.1 to 2.2M 100

B0.25

10 to 50 250

50.1 to 2.2M 100

CSCxxx03

A0.30

10 to 50 250

1, 2, 5 50 100

50.1 to 2.2M 100

B0.40

10 to 50 250

50.1 to 2.2M 100

CSCxxx05

A0.20

10 to 50 250

1, 2, 5 150 100

50.1 to 2.2M 100

B0.25

10 to 50 250

50.1 to 2.2M 100

P x R

CSC

www.vishay.com Vishay Dale

Revision: 03-May-13 2Document Number: 31509

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: CSC08A03100RGEK (preferred part number format)

GLOBAL

MODEL PIN COUNT PACKAGE

HEIGHT SCHEMATIC RESISTANCE

VALUE

TOLERANCE

CODE PACKAGING SPECIAL

CSC 04 to 12 pin

available

04 = 4 pin

08 = 8 pin

12 = 12 pin

A = “A” profile

B = “B” profile

01 = Bussed

03 = Isolated

00 = Special

R = 

K = k

M = M

10R0 = 10 

680K = 680 k

1M00 = 1.0 M

0000 = 0 

Jumper

F = ± 1 %

G = ± 2 %

J = ± 5 %

S = Special

Z = 0 

Jumper

EK = Lead (Pb)-free, bulk

PA = Tin/lead, bulk

Blank = Standard

(dash number)

(up to 3 digits)

From 1 to 999

as applicable

Historical Part Number example: CSC08A03101GEK (will continue to be accepted)

CSC 08 A 03 101 G EK

HISTORICAL

MODEL PIN COUNT PACKAGE

HEIGHT SCHEMATIC RESISTANCE

VALUE

TOLERANCE

CODE PACKAGING

New Global Part Numbering: CSC08A05131AGEK (preferred part number format)

GLOBAL

MODEL PIN COUNT PACKAGE

HEIGHT SCHEMATIC RESISTANCE

VALUE

TOLERANCE

CODE PACKAGING SPECIAL

CSC 04 to 12 pin

available

04 = 4 pin

08 = 8 pin

12 = 12 pin

A = “A” profile

B = “B” profile

05 = Dual

terminator

3 digit

impedance

code, followed

by alpha

modifier (see

impedance

table)

F = ± 1 %

G = ± 2 %

J = ± 5 %

EK = Lead (Pb)-free, bulk

PA = Tin/lead, bulk

Blank = Standard

(Dash Number)

(Up to 3 digits)

From 1 to 999

as applicable

Historical Part Number example: CSC08A05131AGEK (will continue to be accepted)

CSC 08 A 05 221 331 G EK

HISTORICAL

MODEL PIN COUNT PACKAGE

HEIGHT SCHEMATIC RESISTANCE

VALUE 1

RESISTANCE

VALUE 2

TOLERANCE

CODE PACKAGING

TECHNICAL SPECIFICATIONS

PARAMETER UNIT CSC SERIES

Voltage coefficient of resistance Veff < 50 ppm typical

Dielectric strength VAC 200

Isolation resistance (03 schematic) > 100M

Operating temperature range °C - 55 to + 125

DIMENSIONS in inches (millimeters)

0.012 ± 0.003

(0.305 ± 0.076)

(Leads are along

centerline of body)

0.098 (2.49) Max.

0.045

(1.14)

Pi n

Max.

0.018 ± 0.003

(0.457 ± 0.076)

0.100 ± 0.010 (2.54 ± 0.254)

Non-Accumulative

0.050 (1.27) Max. 0.032

(0.813)

0.130 ± 0.010

(3.30 ± 0.254)

C S C 0 8A 0 3 1 0 0 R G E K

C S C 0 8A 0 5 1 3 1 A G E K

CSC

www.vishay.com Vishay Dale

Revision: 03-May-13 3Document Number: 31509

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Coating meniscus meets class 2 requirements of IPC-A-610.

STOCKED RESISTANCE VALUES IN 

(“G” TOLERANCE)

Standard E-24 resistance values stocked. Consult factory.

Many dual terminator resistance values stocked. Consult

factory.

Note

• For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530).

01 SCHEMATIC GLOBAL

MODEL

NUMBER OF

RESISTORS

(MAX.) BC

(MAX.)

CSC04 3 0.390 (9.91) 0.300 (7.62)

“A” profile = 0.195 (4.95)

“B” profile = 0.295 (7.50)

CSC05 4 0.490 (12.45) 0.400 (10.16)

CSC06 5 0.590 (14.99) 0.500 (12.70)

CSC07 6 0.690 (17.53) 0.600 (15.24)

CSC08 7 0.790 (20.07) 0.700 (17.78)

CSC09 8 0.890 (22.61) 0.800 (20.32)

CSC10 9 0.990 (25.15) 0.900 (22.86)

CSC11 10 1.09 (27.69) 1.00 (25.40)

CSC12 11 1.19 (30.23) 1.100 (27.94)

03 SCHEMATIC GLOBAL

MODEL

NUMBER OF

RESISTORS

(MAX.) BC

(MAX.)

CSC04 2 0.390 (9.91) 0.300 (7.62)

“A” profile = 0.195 (4.95)

“B” profile = 0.295 (7.50)

CSC06 3 0.590 (14.99) 0.500 (12.70)

CSC08 4 0.790 (20.07) 0.700 (17.78)

CSC10 5 0.990 (25.15) 0.900 (22.86)

CSC12 6 1.19 (30.23) 1.100 (27.94)

05 SCHEMATIC GLOBAL

MODEL

NUMBER OF

RESISTORS

(MAX.) BC

(MAX.)

CSC04 4 0.390 (9.91) 0.300 (7.62)

“A” profile = 0.195 (4.95)

“B” profile = 0.295 (7.50)

CSC05 6 0.490 (12.45) 0.400 (10.16)

CSC06 8 0.590 (14.99) 0.500 (12.70)

CSC07 10 0.690 (17.53) 0.600 (15.24)

CSC08 12 0.790 (20.07) 0.700 (17.78)

CSC09 14 0.890 (22.61) 0.800 (20.32)

CSC10 16 0.990 (25.15) 0.900 (22.86)

CSC11 18 1.09 (27.69) 1.00 (25.40)

CSC12 20 1.19 (30.23) 1.100 (27.94)

1 2 3 n-1 n

1 2 3 4 n-1 n

1 2 3 n-1 n

MECHANICAL SPECIFICATIONS

Marking resistance

to solvents

Permanency testing per

MIL-STD-202, method 215

Solderability Per MIL-STD-202, method 208E,

RMA flux

Body High alumina, epoxy coated

Terminals (1) Solder plated leads

IMPEDANCE CODES

CODE R1 () R2 ()CODER1 () R2 ()

500B 82 130 141A 270 270

750B 120 200 181A 330 390

800C 130 210 191A 330 470

990A 160 260 221B 330 680

101C 180 240 281B 560 560

111C 180 270 381B 560 1.2K

121B 180 390 501C 620 2.7K

121C 220 270 102A 1.5K 3.3K

131A 220 330 202B 3K 6.2K

CSC

www.vishay.com Vishay Dale

Revision: 03-May-13 4Document Number: 31509

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

”A“ Profile

1.90

1.50

1.15

0.45

0.30

- 50 + 25 + 70 + 125 + 150

CSC10A Package

Ambient Te mperature °C

Deratin g

Power Rating (W)

CSC08A Package

CSC06A Package

Single Resistor

03 Schematic

01 and 05 Schematics

”B“ Profile

- 50 + 25 + 70 + 125 + 150

2.50

2.00

1.50

0.60

0.38

CSC08B Packag e

03 Schematic

Single Resisto r

CSC06B Package

CSC10B Package

Ambient Te mperature °C

Deratin g

01 and 05 Schematics

Power Rating (W)

“A” PROFILE + 70 °C PACKAGE RATINGS

CSC12A 1.5 W

CSC11A 1.37 W

CSC10A 1.25 W

CSC09A 1.12 W

CSC08A 1.00 W

CSC07A 0.87 W

CSC06A 0.75 W

CSC05A 0.62 W

CSC04A 0.40 W

“B” PROFILE + 70 °C PACKAGE RATINGS

CSC12B 1.90 W

CSC11B 1.75 W

CSC10B 1.60 W

CSC09B 1.45 W

CSC08B 1.30 W

CSC07B 1.15 W

CSC06B 1.00 W

CSC05B 0.80 W

CSC04B 0.60 W

CSC

www.vishay.com Vishay Dale

Revision: 03-May-13 5Document Number: 31509

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CIRCUIT APPLICATIONS

01 Schematic Bussed

The CSCxxx01 single-in-line resistor networks provide the user with

nominally equal resistors, each connected to a common pin (pin no. 1).

Commonly used in the following applications:

• “Wired OR” pull-up • Open collector pull-up

• Power gate pull-up • TTL input pull-down

• MOS/ROM pull-up/pull-down • TTL unused gate pull-up

* “A” profile standard, “B” profile available.

03 Schematic Isolated

The CSCxxx03 single-in-line resistor networks provide the user with

nominally equal resistors. Each resistor is isolated from all others.

Commonly used in the following applications:

• “Wired OR” pull-up • Long-line impedance balancing

• Power driven pull-up • LED current limiting

• Power gate pull-up • ECL output pull-down

• Line termination • TTL input pull-down

* “A” Profile standard, “B” profile available.

05 Schematic Dual Terminator

The CSCxxx05 circuits contain series pairs of resistors. Each series

pair is connected between two common lines. The junction of these

resistor pairs is connected to the input terminals. The 05 circuits are

designed for TTL dual-line termination and pulse squaring.

* “A” profile standard, “B” profile available.

PERFORMANCE

TEST CONDITIONS MAX. R (TYPICAL TEST LOTS)

Thermal shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % R

Short time overload 2.5 x rated working voltage, 5 s ± 0.25 % R

Low temperature operation 45 min at full rated working voltage at - 65 °C ± 0.25 % R

Moisture resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 1.00 % R

Resistance to soldering heat Leads immersed in + 350 °C solder to within 1/16" of body for 3 s ± 0.25 % R

Shock Total of 18 shocks at 100 g's ± 0.25 % R

Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % R

Load life 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full

1000 h period. Derated according to the curve. ± 1.00 % R

Terminal strength 4.5 pound pull for 30 s ± 0.25 % R

Insulation resistance 10 000 M (minimum) -

Dielectric withstanding voltage No evidence of arcing or damage (200 VRMS for 1 min) -

1 2 3 n-1 n

1 2 3 4 n-1 n

1 2 3 n-1 n

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.