J LOW N SERIES a be Mates with: ; CLT. MMS NOM INGY oe PESTO ao (DE WHI NTC ROW FREQUENCY TAIL BON ee CORAM en RelnsielNh nm Colenalont) wm Mmtolsuatelt fe) sare Features: co c yO Lew or high I impedance ceramic | insulators on each pin a - ae Wide range of board spacing achievable =Through Hole Through-hole and surface mount A a0: Single and double row g do =Surtace Mount Specifications: FTW Insulator Material: Black LCP and Gray Ferrite Terminal Material: Phosphor Bronze Current Rating: 02 thru 50 = 20u"(0,5Tium) (ete) fom eres area of. longer tail Gold flash on tail = 301" (0,76um) Gold post 150n" [RcAcMIcU eel smera melt (eS) sU [cath aerate mates not available) -T 6 3A @ 80C ambient Operating Temp Range: -65C to 125C with Gold -65C to 105C with Tin Petts) CMe ea ette)) Tin Plating: Au or Sn over 50n" (1,27m) Ni SMT Lead Coplanarity: .006" (0,15mm) max Beadsor blocks at Samtec discretion a = Low Frequency (EMLsuppression-< 30.MHz) = High Frequency (EMI suppression range 30 to 250 MHz) LEAD ST. HEIGHT CB FREQ; 1 -o2 | (9:58) |(2, (4.57) | LOW 377 | .107| 180 | HIGH ~03 | (13.60) 2.1 (9,14) | Low 535 | .085| 360 -04 |{15,10)| (2,1 (10,67) | Low 594 | 084} 420 Note: This Series is non-standard, non-returnable. 1 D SAMTEC USA = Tel: 1-800-SAMTEC-9 or 68 SAMTEC UNITED KINGDOM Tel: 01236 739292 Fax: 01236 727113 ACKER HEIGHT (6,30) 248 (9,35) 368 (10,87) 428 (13,92) LEAD Cc ap | (8,08) 02 | "318 (17,13) 708 [aba na |(12,65) 04 ft 498 HIGH LOW HIGH LOW HIGH LOW HIGH 13.20 17.6Q AQ (15,70) -05 LeF 812-944-6733 + Fax: 812-948-5047 SAMTEC GERMANY Tel: +49 8141 3785 0 Fax: +49 8141 3785 99 Internet: http:/Avww.samtec.com E-mail: info@samtec.com THROUGH HOLE 4.40 min | 7.5Q 420% 7.62 min} 30Q 420% 22Q min SURFACE MOUNT 10MHz LOW | 4.40 min | 7.50 +20% 7964449 O002091 397 a SAMTEC ASIA PACIFIC Tel: 65-745-5955 Fax: 65-841-1502 IMPEDANCE 25MHz 100MHz 140 4.40 min 17.69 min [560 5Q 220 min [700 (1,29) | o 690 | (1,78) IMPEDANCE 070 25MHz 100MHz 140 420% 420 420% 4.4Q min aC. 13.2Q min 30 +20% 17.6 min 45Q 420% 26.4Q min 56Q +20% B40 +20% t SAMTEC FRANCE Tel: 33 0160 24 7550 Fax: 33 0160 24 7559 Note: Due to technical progress, all designs, specifications and components are subject to change without notice.