Features Applications
PHOTO IC
Transmitter/Receiver photo IC for optical link
For MOST automotive network, 50 Mbps band POF communications
L10063-01, S10064-01
L10063-01 and S10064-01 are transmitter and receiver photo ICs developed for MOST (Media Oriented System Transport) networks used in
vehicles to communicate multimedia information. The transmitter photo IC L10063-01 consists of a red LED and driver IC incorporated into a clear
plastic package and can be set to an operating mode that reduces the optical output level by half. The receiver photo IC S10064-01 is a monolithic
photo IC fabricated by the PiN-BiP process and features a wide dynamic range. It also has a low power consumption "sleeping mode" and an optical
wakeup mode triggered by input of light. Both the transmitter and receiver photo IC input or output digital signals through a TTL interface.
l
Wide operating temperature range: -40 to +105 ˚C
l
DC to 50 Mbps data communications
l
TTL input
l
Optical output 50 % cut mode
l
Only for vehicle networks (MOST)
L10063-01
S10064-01
l
Wide operating temperature range: -40 to +105 ˚C
l
4 M to 50 Mbps data communications
l
Monolithic structure immune from external noise
l
TTL output
l
Wide dynamic range
l
Sleeping mode with optical wakeup
1
■ Absolute maximum ratings *1 (Ta= -40 to +105 °C)
Parameter Symbol L10063-01, S10064-01 Unit
Supply voltage Vcc -0.5 to +7.0 V
Operating temperature To p r -40 to +105 °C
Storage temperature Tstg -40 to +120 °C
Soldering Ts o l 260 °C, 5 s, 3 times, at least 2.5 mm away from lead root -
■ Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc=4.75 to 5.25 V *1)
Parameter Symbol Condition Min. Typ. Max. Unit
Current consumption
(operation mode) Icco *2--30mA
Current consumption (sleeping mode) Iccs Dark state - - 20 µA
Receiver level Popt3 Bi-phase signal -25 - -2 dBm
High level output voltage Voh Ioh= -150 µm 2.5 -Vcc+0.3 V
Low level output voltage Vol Iol=1.6 mA 0 - 0.4 V
Rise tim e tr - - 9
Vout
Fall time tf 10 to 90 % *2, *3
- - 7 ns
Pulse width variation tpwv *2, *3, *4, *617.9 - 29.79 ns
Pulse width distortion (average value) tapwd *2, *3, *4, *6-2.69 -+6.49 ns
Operation to sleeping mode transition receivable level
Psl
Sleeping mode to operation transition receivable level
Pop
*2, *5
-39 - -25.5 dBm
High level voltage Vmh Imh= -20 µA 4.0 - - V
Mode
output Low level voltage Vm l Iml=0.88 mA - - 0.5 V
*1: A bypass capacitor (0.1 µF) is connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF
capacitor is also connected to the power supply line nearby.
The center of the optical fiber is aligned with the center of the package lens.
The distance between the fiber end and the lens top is 0.1 mm.
*2: Measured with input signals conforming to SP3 MOST specification of physical layer Rev 1.1 Addendum B.
*3: Measured with RL=50 kΩ, C L=15 pF (including parasitic capacitance such as probe, connector and evaluation circuit board
pattern), and threshold voltage 1.5 V.
*4: An optical input waveform is generated with a H amam atsu standard transm itter.
*5: Average optical output is measured with a POF (NA=0.5).
*6: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion).
Note) • If modulated light at 4 Mbps or less (including DC light and no light input) is input to S10064-01, the high and low levels
cannot be discerned.
S10064-01
MOST compliant products
Specifications of these products are subject to change
without prior notice to keep up with changes in the
MOST standard.
Transmitter/receiver photo IC for optical link L10063-01, S10064-01
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believ ed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
Cat. No. KPIC1065E01
May 2007 DN
2
■ Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc= 4.75 to 5.25 V *7)
Parameter Symbol Condition Min. Typ. Max. Unit
Current consumption Icc Vin= 2.0 V, Rcont=13.5 kΩ--40mA
Peak emission wavelength λp630 650 670 nm
Spectral half width (FWHM) ∆λ -2030nm
Fiber coupled optical output 1 Po1 Rcont=13.5 kΩ *8, *9-9 --2 dBm
Fiber coupled optical output 2 Po2 Rcont=27 kΩ *8, *9-12.5 - -4.5 dBm
Extinction ratio re 10 - - dB
Rise time at pulse drive tr 20 to 80 % *8--6.0ns
Fall time at pulse drive tf 80 to 20 % *8- - 6.0 ns
Pulse width variation tpwv 50 % *8, *10 19.99 - 24.29 ns
Pulse width distortion (average value) tapwd 50 % *8, *10 -1.39 -+1.39 ns
*7: A bypass capacitor (0.1 µF) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF capacitor
is also connected to the power supply line nearby.
The center of the optical fiber is aligned with the center of the package lens.
The distance between the fiber end and the lens top is 0.1 mm.
*8: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B.
*9: Average value measured with a plastic fiber (φ1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon.
*10: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion).
■ Dimensional outlines (unit: mm)
L10063-01
■ Mode output waveform
KPICC0095EA
■ Output waveform example
tso tos
Voh
Vmh
Vol
INPUT SIGNAL DATA
OPTICAL INPUT NO INPUT SIGNAL
MODE OUTPUT
OUTPUT VOLTAGE OUTPUT DATA
Vml
S10064-01
2.032.94
5.92
(2 ×) d = 0.8 ± 0.05
7.2 ± 0.2
(INCLUDING BURR)
8.98 ± 0.2
(INCLUDING BURR)
5.9 ± 0.2
(INCLUDING BURR)
(18.0)
5.1
2.54
(4 ×) 0.5 ± 0.05
2.54
(SPECIFIED AT THE LEAD ROOT) (SPECIFIED AT THE LEAD ROOT)
2.54
2.45
3.7 ± 0.05
1.07
a’
a
1.27
(4 ×) 0.25 ± 0.05
1.50
(2 ×) 10˚
(2 ×) 10˚2.85
2.72
1.57
0.97
2.0 DEPTH 0.15 MAX.
0.6
2.92
1.8
1.24
0.2
0.66
(2 ×) 5˚
0.05
+ 0.05
a-a’ CROSS SECTION
0.23
- 0.03
Pin No. S10064-01
Vcc
GND
MODEOUT
Vout
L10063-01
V
IN
GND
Vcc
Cont
2.03 2.94
5.92
(2 ×) d = 0.8 ± 0.05
7.2 ± 0.2
(INCLUDING BURR)
8.98 ± 0.2
(INCLUDING BURR)
5.9 ± 0.2
(INCLUDING BURR)
(18.0)
5.1
2.54
(4 ×) 0.5 ± 0.05
2.54 2.54
2.45
3.7 ± 0.05
1.07
a’
a’
1.27
EMITTING POINT ACTIVE
AREA
Tolerance unless otherwise
noted: ±0.1, ±2˚
R0.3 MAX.
Values in parentheses indicate
reference value.
Lead surface finish: Pd plating
Shaded area indicates burr.
KPICA0067EA
L10063-01
Vertical axis: 1 V/div., Horizontal axis: 5 ns/div.
(Ta=25 °C, Vcc=5.25 V, Pi= -26 dBm,
RL=50 kΩ, CL=15 pF, 45.2 Mbps)