1. General description
The 74AUP1G7 9 pr ov ide s the si ng le po sit ive- e dg e tr igg er ed D -ty pe flip- flo p. In fo rm ation
on the data input is transfe rred to the Q output on the LOW -to-HIGH transition of the clock
pulse. The D input must be stable one setup time prior to the LOW-to-HIGH clock
transition for predictable operation.
Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire VCC range fr om 0.8 V to 3.6 V.
This device ensures a very low static and dynamic power consumption across the entire
VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the outpu t, pr eve n tin g the damaging backflow current through
the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 0.8 V to 3.6 V
High noise immunity
Complies with JEDEC standards:
JESD8-12 (0.8 V to 1.3 V)
JESD8-11 (0.9 V to 1.65 V)
JESD8-7 (1.2 V to 1. 95 V)
JESD8-5 (1.8 V to 2.7 V)
JESD8-B (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F Class 3A exceeds 5000 V
MM JESD22-A115-A exce eds 20 0 V
CDM JESD22-C101E exceeds 1000 V
Low static power consumption; ICC = 0.9 A (maximum)
Latch-up pe rform a nc e exceeds 100 mA pe r JESD 78 Class II
Inputs accept voltages up to 3.6 V
Low noise overshoot and undershoot < 10 % of VCC
IOFF circuitry provides par tial power-down mode operation
Multiple package options
Specified from 40 Cto+85C and 40 Cto+125C
74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Rev. 6 — 28 June 2012 Product data sheet
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 2 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
3. Ordering information
4. Marking
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74AUP1G79GV 40 Cto+125C SC-74A plastic surface-mounted package; 5 leads SOT753
74AUP1G79GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads;
body width 1.25 mm SOT353-1
74AUP1G79GM 40 C to +125 C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 1.45 0.5 mm SOT886
74AUP1G79GF 40 C to +125 C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 10.5 mm SOT891
74AUP1G79GN 40 C to +125 C XSON6 extremely thin small outline package; no leads;
6 terminals; body 0.9 1.0 0.35 mm SOT1115
74AUP1G79GS 40 C to +125 C XSON6 extremely thin small outline package; no leads;
6 terminals; body 1.0 1.0 0.35 mm SOT1202
74AUP1G79GX 40 C to +125 C X2SON5 X2SON5: plastic thermal enhanced extremely thin
small outline package; no leads; 5 terminals;
body 0.8 0.8 0.35 mm
SOT1226
Table 2. Marking
Type number Marking code[1]
74AUP1G79GV p79
74AUP1G79GW pP
74AUP1G79GM pP
74AUP1G79GF pP
74AUP1G79GN pP
74AUP1G79GS pP
74AUP1G79GX pP
Fig 1. Logic symbol Fig 2. IEC logic symbol
mna440
2
1
CP
D4Q
mna441
2DQ
CP
14
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 3 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
6. Pinning information
6.1 Pinning
Fig 3. Logic diagra m
mna442
CP
D
C
C
C
C
C
C
C
C
C
TG
TG
TG
TG
Q
C
Fig 4. Pin configu ration SOT353-1 and SOT753 Fig 5. Pin configuration SOT886
74AUP1G79
DV
CC
CP
GND Q
001aac562
1
2
3
5
4
74AUP1G79
CP
001aac524
D
GND
n.c.
VCC
Q
Transparent top view
2
3
1
5
4
6
Fig 6. Pin configu ration SOT891, SOT1115 and
SOT1202 Fig 7. Pin configuration SOT1226 (X2 S ON5)
74AUP1G79
CP
001aaf179
D
GND
n.c.
VCC
Q
Transparent top view
2
3
1
5
4
6
DVCC
GND
1
3
2
5
4
CP Q
aaa-003007
Transparent top view
74AUP1G79
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 4 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
6.2 Pin description
7. Functional description
[1] H = HIGH voltage level;
L = LOW voltage level;
= LOW-to-HIGH CP transition;
X = don’t care;
q = lower case letter indicates the state of referenced input, one setup time prior to the LOW-to-HIGH CP transition.
8. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For TSSOP5 and SC-74A packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 and X2SON5 packages: above 118 C the value of Ptot derates linearly with 7.8 mW/K.
Table 3. Pin description
Symbol Pin Description
TSSOP5 and X2SON5 XSON6
D 1 1 data input
CP 2 2 clock pulse input
GND 3 3 ground (0 V)
Q 4 4 data output
n.c. - 5 not connected
VCC 5 6 supply voltage
Table 4. Function table[1]
Input Output
CP D Q
LL
HH
LXq
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +4.6 V
IIK input clamping current VI<0V 50 - mA
VIinput voltage [1] 0.5 +4.6 V
IOK output clamping current VO<0V 50 - mA
VOoutput voltage Active mode and Power-down mode [1] 0.5 +4.6 V
IOoutput cur rent VO=0 VtoV
CC -20 mA
ICC supply current - 50 mA
IGND ground current 50 - mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation Tamb =40 C to +125 C[2] -250mW
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 5 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
9. Recommended operating conditions
10. Static characteristics
Table 6. Recommended operating con ditions
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.8 3.6 V
VIinput voltage 0 3.6 V
VOoutput voltage Active mode 0 VCC V
Power-down mode; VCC =0V 0 3.6 V
Tamb ambient temperature 40 +125 C
t/V input transition rise and fall rate VCC = 0.8 V to 3.6 V 0 200 ns/V
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 C
VIH HIGH-level input voltage VCC = 0.8 V 0.70 VCC -- V
VCC = 0.9 V to 1.95 V 0.65 VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.30 VCC V
VCC = 0.9 V to 1.95 V - - 0.35 VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V VCC 0.1 - - V
IO = 1.1 mA; VCC = 1.1 V 0.75 VCC -- V
IO = 1.7 mA; VCC = 1.4 V 1.11 - - V
IO = 1.9 mA; VCC = 1.65 V 1.32 - - V
IO = 2.3 mA; VCC = 2.3 V 2.05 - - V
IO = 3.1 mA; VCC = 2.3 V 1.9 - - V
IO = 2.7 mA; VCC = 3.0 V 2.72 - - V
IO = 4.0 mA; VCC = 3.0 V 2.6 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.31 V
IO = 1.9 mA; VCC = 1.65 V - - 0.31 V
IO = 2.3 mA; VCC = 2.3 V - - 0.31 V
IO = 3.1 mA; VCC = 2.3 V - - 0.44 V
IO = 2.7 mA; VCC = 3.0 V - - 0.31 V
IO = 4.0 mA; VCC = 3.0 V - - 0.44 V
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 6 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - 0.1 A
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - 0.2 A
IOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC = 0 V t o 0.2 V --0.2 A
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --0.5A
ICC additional supply current per pin; VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V [1] --40A
CIinput capacitance VCC = 0 V to 3.6 V; VI = GND or VCC -0.8-pF
COoutput capacitance VO = GND; VCC = 0 V - 1.7 - pF
Tamb = 40 C to +85 C
VIH HIGH-level input voltage VCC = 0.8 V 0.70 VCC -- V
VCC = 0.9 V to 1.95 V 0.65 VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.30 VCC V
VCC = 0.9 V to 1.95 V - - 0.35 VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V VCC 0.1 - - V
IO = 1.1 mA; VCC = 1.1 V 0.7 VCC -- V
IO = 1.7 mA; VCC = 1.4 V 1.03 - - V
IO = 1.9 mA; VCC = 1.65 V 1.30 - - V
IO = 2.3 mA; VCC = 2.3 V 1.97 - - V
IO = 3.1 mA; VCC = 2.3 V 1.85 - - V
IO = 2.7 mA; VCC = 3.0 V 2.67 - - V
IO = 4.0 mA; VCC = 3.0 V 2.55 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.37 V
IO = 1.9 mA; VCC = 1.65 V - - 0.35 V
IO = 2.3 mA; VCC = 2.3 V - - 0.33 V
IO = 3.1 mA; VCC = 2.3 V - - 0.45 V
IO = 2.7 mA; VCC = 3.0 V - - 0.33 V
IO = 4.0 mA; VCC = 3.0 V - - 0.45 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - 0.5 A
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - 0.5 A
IOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC = 0 V t o 0.2 V --0.6 A
Table 7. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 7 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
[1] One input at VCC 0.6 V, other input at VCC or GND.
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --0.9A
ICC additional supply current per pin; VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V [1] --50A
Tamb = 40 C to +125 C
VIH HIGH-level input voltage VCC = 0.8 V 0.75 VCC -- V
VCC = 0.9 V to 1.95 V 0.70 VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.25 VCC V
VCC = 0.9 V to 1.95 V - - 0.30 VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V VCC 0.11 - - V
IO = 1.1 mA; VCC = 1.1 V 0.6 VCC -- V
IO = 1.7 mA; VCC = 1.4 V 0.93 - - V
IO = 1.9 mA; VCC = 1.65 V 1.17 - - V
IO = 2.3 mA; VCC = 2.3 V 1.77 - - V
IO = 3.1 mA; VCC = 2.3 V 1.67 - - V
IO = 2.7 mA; VCC = 3.0 V 2.40 - - V
IO = 4.0 mA; VCC = 3.0 V 2.30 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 0.8 V to 3.6 V - - 0.11 V
IO = 1.1 mA; VCC = 1.1 V - - 0.33 VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.41 V
IO = 1.9 mA; VCC = 1.65 V - - 0.39 V
IO = 2.3 mA; VCC = 2.3 V - - 0.36 V
IO = 3.1 mA; VCC = 2.3 V - - 0.50 V
IO = 2.7 mA; VCC = 3.0 V - - 0.36 V
IO = 4.0 mA; VCC = 3.0 V - - 0.50 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - 0.75 A
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - 0.75 A
IOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC = 0 V t o 0.2 V --0.75 A
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --1.4A
ICC additional supply current per pin; VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V [1] --75A
Table 7. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 8 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
11. Dynamic characteristics
Table 8. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 C40 C to +125 CUnit
Min Typ[1] Max Min
(85 C) Max
(85 C) Min
(125 C) Max
(125 C)
CL = 5 pF
tpd propagation
delay CP to Q; see Figure 8 [2]
VCC = 0.8 V - 19.7 - - - - - ns
VCC = 1.1 V to 1.3 V 2.6 5.5 11.0 2.4 12.9 2.4 14.2 ns
VCC = 1.4 V to 1.6 V 2.0 3.8 7.0 1.8 8.1 1.8 9.0 ns
VCC = 1.65 V to 1.95 V 1.7 3.1 5.4 1.5 6.4 1.5 7.1 ns
VCC = 2.3 V to 2.7 V 1.4 2.3 4.0 1.1 4.7 1.1 5.2 ns
VCC = 3.0 V to 3.6 V 1.2 2.0 3.4 0.9 4.0 0.9 4.4 ns
fmax maximum
frequency CP; see Figure 9
VCC = 0.8 V - 53 - - - - - MHz
VCC = 1.1 V to 1.3 V - 20 3 - 170 - 170 - MHz
VCC = 1.4 V to 1.6 V - 34 7 - 310 - 300 - MHz
VCC = 1.65 V to 1.95 V - 435 - 400 - 390 - MHz
VCC = 2.3 V to 2.7 V - 55 0 - 490 - 480 - MHz
VCC = 3.0 V to 3.6 V - 61 9 - 550 - 510 - MHz
CL = 10 pF
tpd propagation
delay CP to Q; see Figure 8 [2]
VCC = 0.8 V - 23.1 - - - - - ns
VCC = 1.1 V to 1.3 V 3.1 6.3 12.3 2.8 1 4.4 2.8 15.9 ns
VCC = 1.4 V to 1.6 V 2.5 4.4 8.1 2.2 9.5 2.2 10.5 ns
VCC = 1.65 V to 1.95 V 2.1 3.6 6.3 1.9 7.5 1.9 8.3 ns
VCC = 2.3 V to 2.7 V 1.8 2.8 4.7 1.5 5.6 1.5 6.2 ns
VCC = 3.0 V to 3.6 V 1.7 2.5 4.1 1.3 4.5 1.3 5.0 ns
fmax maximum
frequency CP; see Figure 9
VCC = 0.8 V - 52 - - - - - MHz
VCC = 1.1 V to 1.3 V - 19 2 - 150 - 150 - MHz
VCC = 1.4 V to 1.6 V - 32 4 - 280 - 230 - MHz
VCC = 1.65 V to 1.95 V - 421 - 310 - 250 - MHz
VCC = 2.3 V to 2.7 V - 48 6 - 370 - 360 - MHz
VCC = 3.0 V to 3.6 V - 55 0 - 410 - 360 - MHz
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 9 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
CL = 15 pF
tpd propagation
delay CP to Q; see Figure 8 [2]
VCC = 0.8 V - 26.6 - - - - - ns
VCC = 1.1 V to 1.3 V 3.5 7.1 13.6 3.2 1 5.6 3.2 17.2 ns
VCC = 1.4 V to 1.6 V 2.8 5.0 9.2 2.5 10.7 2.5 11.8 ns
VCC = 1.65 V to 1.95 V 2.4 4.1 7.1 2.2 8.5 2.2 9.4 ns
VCC = 2.3 V to 2.7 V 2.2 3.2 5.4 1.9 6.3 1.9 7.0 ns
VCC = 3.0 V to 3.6 V 2.0 2.9 4.5 1.6 5.0 1.6 5.5 ns
fmax maximum
frequency CP; see Figure 9
VCC = 0.8 V - 50 - - - - - MHz
VCC = 1.1 V to 1.3 V - 18 1 - 120 - 120 - MHz
VCC = 1.4 V to 1.6 V - 30 1 - 190 - 160 - MHz
VCC = 1.65 V to 1.95 V - 407 - 240 - 190 - MHz
VCC = 2.3 V to 2.7 V - 42 2 - 300 - 270 - MHz
VCC = 3.0 V to 3.6 V - 48 1 - 320 - 300 - MHz
CL = 30 pF
tpd propagation
delay CP to Q; see Figure 8 [2]
VCC = 0.8 V - 36.8 - - - - - ns
VCC = 1.1 V to 1.3 V 4.7 9.3 17.3 4.2 2 3.3 4.2 25.6 ns
VCC = 1.4 V to 1.6 V 3.8 6.4 11.8 3.3 14.3 3.3 15.7 ns
VCC = 1.65 V to 1.95 V 3.3 5.3 9.4 3.0 11.3 3.0 12.4 ns
VCC = 2.3 V to 2.7 V 3.0 4.3 7.0 2.7 8.5 2.7 9.4 ns
VCC = 3.0 V to 3.6 V 2.8 3.9 5.8 2.6 7.2 2.6 7.9 ns
fmax maximum
frequency CP; see Figure 9
VCC = 0.8 V - 28 - - - - - MHz
VCC = 1.1 V to 1.3 V - 12 8 - 70 - 70 - MHz
VCC = 1.4 V to 1.6 V - 20 6 - 120 - 110 - MHz
VCC = 1.65 V to 1.95 V - 262 - 150 - 120 - MHz
VCC = 2.3 V to 2.7 V - 26 9 - 190 - 170 - MHz
VCC = 3.0 V to 3.6 V - 30 9 - 200 - 190 - MHz
Table 8. Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 C40 C to +125 CUnit
Min Typ[1] Max Min
(85 C) Max
(85 C) Min
(125 C) Max
(125 C)
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 10 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
CL = 5 pF, 10 pF, 15 pF and 30 pF
tsu set-up time HIGH; D to CP;
see Figure 9
VCC = 0.8 V - 3.4 - - - - - ns
VCC = 1.1 V to 1.3 V - 0.8 - 1.6 - 1.4 - ns
VCC = 1.4 V to 1.6 V - 0.5 - 1.0 - 1.0 - ns
VCC = 1.65 V to 1.95 V - 0.5 - 0.9 - 0.9 - ns
VCC = 2.3 V to 2.7 V - 0.4 - 0.7 - 0.7 - ns
VCC = 3.0 V to 3.6 V - 0.4 - 0.6 - 0.6 - ns
LOW; D to CP; see Figure 9
VCC = 0.8 V - 3.0 - - - - - ns
VCC = 1.1 V to 1.3 V - 0.9 - 1.4 - 1.4 - ns
VCC = 1.4 V to 1.6 V - 0.6 - 1.0 - 1.0 - ns
VCC = 1.65 V to 1.95 V - 0.5 - 0.9 - 0.9 - ns
VCC = 2.3 V to 2.7 V - 0.5 - 0.8 - 0.8 - ns
VCC = 3.0 V to 3.6 V - 0.7 - 1.0 - 1.0 - ns
thhold time D to CP; see Figure 9
VCC = 0.8 V - -1.9 - - - - - ns
VCC = 1.1 V to 1.3 V - -0.6 - 0.2 - 0.2 - ns
VCC = 1.4 V to 1.6 V - -0.4 - 0 - 0 - ns
VCC = 1.65 V to 1.95 V - -0.4 - 0 - 0 - ns
VCC = 2.3 V to 2.7 V - -0.4 - 0 - 0 - ns
VCC = 3.0 V to 3.6 V - -0.3 - 0 - 0 - ns
tWpulse width HIGH or LOW; CP;
see Figure 9
VCC = 0.8 V - 5.6 - - - - - ns
VCC = 1.1 V to 1.3 V - 2.4 - 3.5 - 3.5 - ns
VCC = 1.4 V to 1.6 V - 1.3 - 2.0 - 2.0 - ns
VCC = 1.65 V to 1.95 V - 0.9 - 1.9 - 1.9 - ns
VCC = 2.3 V to 2.7 V - 0.7 - 2.0 - 2.0 - ns
VCC = 3.0 V to 3.6 V - 0.6 - 2.2 - 2.2 - ns
Table 8. Dynamic characteristics …continu ed
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 C40 C to +125 CUnit
Min Typ[1] Max Min
(85 C) Max
(85 C) Min
(125 C) Max
(125 C)
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 11 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
[1] All typical values are measured at nominal VCC.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in W).
PD=C
PD VCC2fiN+(CLVCC2fo) where:
fi= input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CLVCC2fo) = sum of the outputs.
CPD power
dissipation
capacitance
fi = 1 MHz; VI= GND to VCC [3]
VCC = 0.8 V - 1.6 - - - - - pF
VCC = 1.1 V to 1.3 V - 1.7 - - - - - pF
VCC = 1.4 V to 1.6 V - 1.8 - - - - - pF
VCC = 1.65 V to 1.95 V - 1.9 - - - - - pF
VCC = 2.3 V to 2.7 V - 2.3 - - - - - pF
VCC = 3.0 V to 3.6 V - 2.7 - - - - - pF
Table 8. Dynamic characteristics …continu ed
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 C40 C to +125 CUnit
Min Typ[1] Max Min
(85 C) Max
(85 C) Min
(125 C) Max
(125 C)
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 12 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
12. Waveforms
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage drops that occur with the output load.
Fig 8. The clock input (CP) to output (Q) propagation delays
mna443
CP input
Q output
t
PHL
t
PLH
V
M
V
M
V
OH
V
I
GND
D input
V
I
GND
V
OL
V
M
V
M
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage drops that occur with the output load.
Fig 9. The clock input (CP) to output (Q) propagation delays, CP clock pulse width, D to CP setup times, CP to D
hold times and the CP maximum frequency
mna647
th
tsu
th
tPHL
tWtPLH
tsu
1/fmax
VM
VM
VM
VI
GND
VI
GND
CP input
D input
VOH
VOL
Q output
Table 9. Measurement points
Supply voltage Output Input
VCC VMVMVItr = tf
0.8 V to 3.6 V 0.5 VCC 0.5 VCC VCC 3.0 ns
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 13 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
[1] For measuring enable and disable times RL = 5 k, for measuring propagation delays, setup and hold times and pulse width RL = 1 M.
Test data is given in Table 10.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 10. Test circuit for measuring switching times
001aac521
DUT
RT
VIVO
V
EXT
V
CC
RL
5 kΩ
CL
G
Table 10. Test data
Supply voltage Load VEXT
VCC CLRL[1] tPLH, tPHL tPZH, tPHZ tPZL, tPLZ
0.8 V to 3.6 V 5 pF, 10 pF, 15 pF and 30 pF 5 k or 1 Mopen GND 2 VCC
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 14 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
13. Package outline
Fig 11. Package outline SOT353-1 (TSSOP5)
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 15 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 12. Package outline SOT753 (SC-74A)
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT753 SC-74A
wBM
bp
D
e
A
A1
Lp
Q
detail X
HE
E
vMA
AB
y
0 1 2 mm
scale
c
X
132
45
Plastic surface-mounted package; 5 leads SOT753
UNIT A1bpcDEHELpQywv
mm 0.100
0.013 0.40
0.25 3.1
2.7
0.26
0.10 1.7
1.3
e
0.95 3.0
2.5 0.2 0.10.2
DIMENSIONS (mm are the original dimensions)
0.6
0.2 0.33
0.23
A
1.1
0.9
02-04-16
06-03-16
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 16 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 13. Package outline SOT886 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT886 MO-252
sot886_po
04-07-22
12-01-05
Unit
mm max
nom
min
0.5 0.04 1.50
1.45
1.40
1.05
1.00
0.95
0.35
0.30
0.27
0.40
0.35
0.32
0.6
A(1)
Dimensions (mm are the original dimensions)
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886
A1b
0.25
0.20
0.17
DEee
1
0.5
LL
1
terminal 1
index area
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
1
6
2
5
3
4
6x
(2)
4x
(2)
A
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 17 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 14. Package outline SOT891 (XSON6)
terminal 1
index area
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT891
SOT891
05-04-06
07-05-15
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
mm 0.20
0.12 1.05
0.95 0.35
0.27
A1
max b E
1.05
0.95
Dee
1L
0.40
0.32
L1
0.350.55
A
max
0.5 0.04
1
6
2
5
3
4
A
6×
(1)
4×
(1)
Note
1. Can be visible in some manufacturing processes.
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 18 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 15. Package outline SOT11 15 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT1115
sot1115_po
10-04-02
10-04-07
Unit
mm max
nom
min
0.35 0.04 0.95
0.90
0.85
1.05
1.00
0.95 0.55 0.3 0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm SOT1115
A1b
0.20
0.15
0.12
DEee
1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
L1
b
321
6 5 4
(6×)(2) A1A
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 19 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 16. Package outline SOT1202 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT1202
sot1202_po
10-04-02
10-04-06
Unit
mm max
nom
min
0.35 0.04 1.05
1.00
0.95
1.05
1.00
0.95 0.55 0.35 0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm SOT1202
A1b
0.20
0.15
0.12
DEee
1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
b
123
L1
6 5 4
(6×)(2)
A
A1
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 20 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Fig 17. Package outline SOT1226 (X2SON5)
References
Outline
version European
projection Issue date
IEC JEDEC EIAJ
SOT1226
sot1226_po
12-04-10
12-04-25
Unit
mm max
nom
min
0.35 0.85
0.80
0.75
0.04 0.30
0.25
0.20
0.85
0.80
0.75
0.27
0.22
0.17 0.05
A(1)
Dimensions
Note
1. Dimension A is including plating thickness.
2. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
SOT1226
A1A3
0.128
0.040
DD
hEbe
0.48
kLv
0.1
wy
0.05 0.05
scale
01 mm
X
terminal 1
index area
D
E
AB
detail X
A
A1A3
C
y
C
y1
54
terminal 1
index area
Dh
L
b
k
eAC B
vCw
21
0.20
0.27
0.22
0.17
y1
X2SON5: plastic thermal enhanced extremely thin small outline package; no leads;
5 terminals; body 0.8 x 0.8 x 0.35 mm
3
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 21 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
14. Abbreviations
15. Revision history
Table 11. Abbreviations
Acronym Description
CDM Charged Device Mo del
DUT Device Under Test
ESD ElectroStatic Dis charge
HBM Human Body Model
MM Machine Model
Table 12. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74AUP1G79 v.6 20120628 Product data sheet - 74AUP1G79 v.5
Modifications: •Added type number 74AUP1G79GX (SOT1226)
•Package outline drawing of SOT886 (Figure 13) modified.
74AUP1G79 v.5 20111128 Product data sheet - 74AUP1G79 v.4
Modifications: •Legal pages updated.
74AUP1G79 v.4 20100720 Product data sheet - 74AUP1G79 v.3
74AUP1G79 v.3 20090803 Product data sheet - 74AUP1G79 v.2
74AUP1G79 v.2 20061017 Product data sheet - 74AUP1G79 v.1
74AUP1G79 v.1 20050912 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 22 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
16. Legal information
16.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the shor t data sheet, the
full data sheet shall pre vail.
Product specificat ion — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an inf ormation
source outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and ther efore such inclu sion and/or use is at the cu stomer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by custo m er’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
74AUP1G79 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 6 — 28 June 2012 23 of 24
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automo tive use. It i s neither qua lif ied nor test ed
in accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automot ive specifications and standard s, customer
(a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies Nexperia for any
liability, damages or failed product claims result ing from customer design an d
use of the product for automotive applications beyond Nexperia’s
standard warranty and Nexperia’s product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
16.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
17. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia 74AUP1G79
Low-power D-type flip-flop; positive-edge trigger
18. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 3
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Functional description . . . . . . . . . . . . . . . . . . . 4
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
9 Recommended operating conditions. . . . . . . . 5
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 21
15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 21
16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 22
16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 22
16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
17 Contact information. . . . . . . . . . . . . . . . . . . . . 23
18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
28 June 2012