Datasheet
RS-SERIES
RS 30 115VAC LD LP 1A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-2083
www.weidmueller.com
Technical data
Creation date November 4, 2010 6:08:49 PM CET
Last update 27.09.2010 / We reserve the right to make technical changes. 2
Dimensions
Length 70 mm Width 11.2 mm
Height 56 mm
Temperature
Ambient temperature (operational) -25 °C...+40 °C Storage temperature -40 °C...+60 °C
Input
Rated voltage 250 V Rated control voltage 115 V AC
Response / drop-out voltage AC coil 98 V Rated current DC 8 A
Pull-in / drop-out current, AC coil 4.3 mA / 2 mA Power rating 0.8 VA
Output
Continuous current 5 A Duration of Bounce ≤ 3 ms
Max. switching current 8 A Max. switching frequency at rated load 30 Hz
Min. switching current 10 mA Switch-off delay ≤ 8 ms
Switch-on delay < 9 ms Switching voltage AC, max. 250 V
making current 8 A min. switching capacity 250 mW
Contact data
Contact design NO contact No. of contacts 1
Contact material AgNi 0.15 gold flashed Mechanical service life 20 x 106 switching cycles
Electrical service life, DC coil > 5x105 switching cycles Electrical service life of AC coil > 7x105 switching cycles
Rated data
Conductor connection system Screw connection DIN Rail compatibility TS 32 TS 35
Humidity 40°C / 93% rel. humidity, no
condensation
Insulation coordination (EN 50 178)
Clearance and creepage distances for
control/load side > 3 mm
Impulse withstand voltage
4 kV
Overvoltage category III Pollution severity 2
Protection class IP 20 Rated voltage 250 V
Other technical data
Free-wheel diode No Reverse polarity protection not available
Version Relay coupler
Approvals
Approvals institutes CSA; GOSTME25;
MARITREG; CE
Classifications
ETIM 2.0 EC001437 ETIM 3.0 EC001437
eClass 5.1 27-37-16-01 eClass 6.0 27-37-16-01