Rev.0 I Page 1 of 3 I www.onsemi.com
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
2050A [2SK2539]
Features
· Large | yfs |.
· Small Ciss.
· Small-sized package permitting 2SK2539-applied
sets to be made small and slim.
· Adoption of FBET process.
˚C
˚C
Electrical Characteristics at Ta = 25˚C
1 : Source
2 : Drain
3 : Gate
SANYO : CP
* : The 2SK2539 is classified by IDSS as follows : (unit : mA) Continued on next page.
Marking : AK
IDSS rank : 6, 7, 8
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVecruoS-ot-niarDV
XSD 51V
egatloVniarD-ot-etaGV
SDG 51–V
tnerruCetaGI
G5Am
tnerruCniarDI
D05Am
noitapissiDrewoPelbawollAP
D002Wm
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
0.4
0.95 0.95
1.9
2.9
0.5
1.5
2.5
0.5
0.16
0 to 0.1
0.8
1.1
2
3
1
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnwodkaerBniarD-ot-etaGV
SDG)RB( IGV,Aµ01–= SD 0=51–V
tnerruCegakaeLecruoS-ot-etaGI
SSG VSG V,V01–= SD 0=0.1–An
tnerruCniarDegatloVetaG-oreZI
SSD VSD V,V5= SG 0=*0.01*0.05Am
egatloVffotuCV
)ffo(SG VSD I,V5= DAµ01=6.0–4.1–0.3–V
ecnattimdArefsnarTdrawroF 1|sfy|V
SD I,V5= DzHk1=f,Am01=4112Sm
2|sfy|V
SD V,V5= SG zHk1=f,0=4192Sm
0.0260.010.2370.610.0580.52
Ordering number : ENN5075
2SK2539 N-Channel Junction Silicon FET
High-Frequency Amplifier,
Analog Switch Applications
© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0 www.onsemi.com Publication Order Number:
2SK2539/D
2SK2539
Rev.0 I Page 2 of 3 I www.onsemi.com
Continued from preceding page.
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
ecnaticapaCtupnIssiCV
SD V,V5= SG zHM1=f,0=9.4Fp
ecnaticapaCrefsnarTesreveRssrCV
SD V,V5= SG zHM1=f,0=4.1Fp
2SK2539
Rev.0 I Page 3 of 3 I www.onsemi.com 2SK2539/D
!"# $%
&!'# '"# !! ' ( ( ' ! ) * $%+
*& ! ' # '"# ! ! ' ( ( ' # ) * $%+
&,
& !!'" "'- )*
$%+
&
.& (" #-! "-!
! !
.& ''##' !
" #$
&
www.onsemi.com
"
&./&++000+
* / 1
2/
%!" "&' ""
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameter s which may be provided in SCILLC data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or u nauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
