• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4075, REV. E
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 300-VOLT, 40 AMP, POWER SILICON CARBIDE RECTIFIER IN A CERAMIC
HERMETIC LCC-5 PACKAGE.
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
• AVAILABLE SCREENED TO ANY REQUIRED LEVEL
MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING SYMB
OL MAX. UNITS
PEAK INVERSE VOLTAGE PIV 300 Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC= 65 OC,
for Dual Package) IO40 Amps
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC= 65 OC,
for Single Package) IO20 Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 8.3ms, Sine) per leg, TC= 25 OCIFRM 45 Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 10µs, Pulse) per leg, TC= 25 OCIFSM 100 Amps
MAXIMUM JUNCTION CAPACITANCE (Vr =5V) per leg CT450 PF
MAXIMUM POWER DISSIPATION, TC= 25 OCPd65 W
MAXIMUM THERMAL RESISTANCE, Junction to Case (PER DUAL
PACKAGE) RθJC 2.4 °C/W
MAXIMUM OPERATING TEMPERATURE RANGE Top -55 to
+175 °C
MAXIMUM STORAGE TEMPERATURE RANGE Tstg -55 to
+175 °C
SHD620010
SHD620010P
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4075, REV. E
SHD620010
SHD620010P
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4075, REV. E
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC TYP MAX. UNITS
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 10 Amps) (PER LEG)
TJ = 25 °C Vf
TJ = 150 °C
1.35
1.30 1.50
1.45 Volts
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 20 Amps) (PER LEG)
TJ = 25 °C Vf
TJ = 150 °C
1.70
1.75 1.90
2.00 Volts
MAXIMUM REVERSE CURRENT (Ir @ 300V PIV) (PER LEG)
TJ = 25 °C Ir
TJ = 150 °C
0.04
0.12 0.40
2.00 MA
TOTAL CAPACITIVE CHARGE (VR=200V IF=20A di/dt=200A/µs TJ=25°C) QC
per leg 26 N/A NC
MECHANICAL DIMENSIONS: IN Inches / mm
COMMON CATHODE
2 1 3
SINGLE
1 2 3
PINOUT TABLE
DEVICE TYPE PIN 1 PIN 2 PIN 3
SINGLE RECTIFIER CATHODE ANODE ANODE
DUAL, COMMON CATHODE COMMON CATHODE ANODE 1 ANODE 2
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
SHD620010
SHD620010P
LCC-5
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
