B84111A0000B060 - EPCOS (TDK)

EMC Filters

Series/Type: B84111A

The following products presented in this data sheet are being withdrawn.

Ordering Code Substitute Product Date of

Withdrawal Deadline Last

Orders Last Shipments

B84111A0000L110 2013-04-12 2013-07-31 2013-10-31

B84111A0000L060 2013-04-12 2013-07-31 2013-10-31

B84111A0000L030 2013-04-12 2013-07-31 2013-10-31

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Ordering Code Substitute Product Date of

Withdrawal Deadline Last

Orders Last Shipments

B84111A0000K060 2013-04-12 2013-07-31 2013-10-31

B84111A0000K030 2013-04-12 2013-07-31 2013-10-31

B84111A0000K010 2013-04-12 2013-07-31 2013-10-31

For further information please contact your nearest EPCOS sales office, which will also support

you in selecting a suitable substitute. The addresses of our worldwide sales network are

presented at www.epcos.com/sales.

2-line filters B84111A

SIFI-A for normal insertion loss

Power line filters for 1-phase systems

Rated voltage 250 V DC/AC, 50/60 Hz

Rated current 1 to 20 A

Alternative version

■ Series B84111F (SIFI-F)

offers a low-cost solution

Construction

■ 2-line filters

■ Metal case

■ Polyurethane potting (UL 94 V-0)

Features

■ Compact design

■ Optimized leakage current

■ Cost-optimized construction

■ Also for assembly on top-hat rails

■ ENEC10, UL and CSA approval

Applications

■ Switch-mode power supplies in

– industrial electronics

– telecommunications

– data systems

– medical equipment

■ DC applications

Case styles and terminal styles

Case style A Tab connectors on face ends, lateral fixing lugs.

Particularly suitable for mounting on a shielding wall.

Case style B Tab connectors on face ends, fixing lugs on face ends.

Case style K IEC connector as per IEC 60320 C 14 on line side,

tab connectors on load side, mounting holes with metric thread.

Case style L Litz wires on face ends, fixing lugs on face ends

Marking

Marking on component:

Manufacturer’s logo, ordering code,

rated voltage, rated current, rated temperature,

climatic category, date code

Minimum marking on packaging:

Manufacturer’s logo, ordering code

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 2

2-line filters B84111A

SIFI-A for normal insertion loss

Circuit diagram

L

LINE LOAD

L’

N N’

SSB0525-W

Technical data and measuring conditions

Rated voltage VR 250 V DC/AC 50/60 Hz

Rated current IR Referred to 40 °C ambient temperature

Test voltage Vtest 1414 V DC, 2 s (line/line)

2700 V DC, 2 s (lines/case)

Leakage current lleak At 230 V AC, 50 Hz

Climatic category (IEC 60068-1) 25/085/21 (–25 °C/+85 °C/21 days damp heat test)

Approvals EN 133200, UL 1283, CSA C22.2 No.8

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 3

2-line filters B84111A

SIFI-A for normal insertion loss

Characteristics and ordering codes

IR

A

CR LR

mH

Ileak

mA

Case

style

Approx.

weight

g

Ordering code Mounting plate

for top-hat rail

(ordering code)

VR = 250 V DC/AC, 50/60 Hz

1 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

2 ×

1.5

< 0.5 A

K

80

140

B84111A0000A010

B84111A0000K010

—

2 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

2 ×

1.5

< 0.5 A 80 B84111A0000A020 —

3 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

2 ×

1.5

< 0.5 A

K

L

80

140

80

B84111A0000A030

B84111A0000K030

B84111A0000L030

—

6 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

2 ×

1.8

< 0.5 A

B

K

L

110

140

110

B84111A0000A060

B84111A0000B060

B84111A0000K060

B84111A0000L060

—

C62122A0132B091

—

10 2 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

0.82 < 0.5 A

B

L

120

B84111A0000A110

B84111A0000B110

B84111A0000L110

—

C62122A0132B091

—

20 2 × 0.1 µF (X2)

+

2 × 4700 pF (Y2)

2 ×

0.47

< 0.5 A

B

210

B84111A0000A120

B84111A0000B120

—

C62122A0132B091

2

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 4

2-line filters B84111A

SIFI-A for normal insertion loss

Case styles and dimensions

Case

style

IR

A

Dimensions (mm)

b1 b2 b3 b4 l1 l2 l3 l4 h1 h2 Litz

mm2

Style

1015

A

K

1

45

51

26.5

—

60.4

—

70

—

50

63.5

—

76.5

—

22.3

32

14

—

A 2 45 26.5 60.4 70 50 — — 76.5 22.3 14 — —

A

K

L

3

45

51

45

26.5

—

60.4

—

70

—

50

63.5

50

—

60.4

—

70

76.5

—

22.3

32

28.6

14

—

0.82

—

AWG18

A

B

K

L

6

45

51

45

26.5

—

60.4

—

70

—

50

63.5

50

—

60.4

—

60.4

—

70

—

70

76.5

—

28.6

32

28.6

20

—

0.82

—

AWG18

A

B

L

10

45

26.5

—

60.4

—

70

—

50

—

60.4

—

70

76.5

—

28.6

20

—

1.35

—

AWG16

A

B

20

63.5 31.5 74.7 84.5 50.8 — — 77 38.1 28 — —

See dimensional drawing

Case style A Case style A

1 … 3 A (B84111A0000A010, A020, A030) 6 … 20 A (B84111A0000A060, A110, A120)

b

SSB0527-D-E

b

2

1

2

1

h

0.8

3

b

4

b

1

4

Tab connector A6.3 x 0.8

ø4.7

b

2

1

2

1

h

0.8

Tab connector A6.3 x 0.8

ø4.7

SSB0526-5-E

h

3

b

4

b

1

4

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 5

2-line filters B84111A

SIFI-A for normal insertion loss

Case style B Case style B

6 and 10 A (B84111A0000B060, B110) 20 A (B84111A0000B120)

63.5

b1

31.5

0.8

38.1

50.8

70

77

ø4.7

b2

2

h

1

h

0.8

3

2

ø4.7

1

60.4 28

Tab connector A6.3 x 0.8

SSB0528-L-E

SSB0245-S-E

Case style K Case style L

b

1

10±1

M4

SSB0255-Z-E

16

4

1

h

40

Tab connector A6.3 x 0.8

31.5

ø4.5

20.5

28.5

40±0.2

Panel cutout

16±1

0.8

3.4±1

4±1

ø4.7

BU

BN

GNYE

BU

BN

26

_

62

_

105+15105+15 h

1

b1

2

3

1

3 113

19

SSB0529-U-E

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 6

2-line filters B84111A

SIFI-A for normal insertion loss

Insertion loss (typical values at Z = 50 Ω)

unsymmetrical, adjacent branches terminated

common mode, all branches in parallel (asymmetrical)

differential mode (symmetrical)

Filters for 1 to 3 A

100

B84111A0000*010

B84111A0000*020

B84111A0000*030

SSB0239-I

dB

α

80

60

40

20

0

10

4

10

5

10

6

10

7

Hz 10

8

f

Filters for 10 A

100

B84111A0000*110

SSB0241-U

dB

α

80

60

40

20

0

10

4

10

5

10

6

10

7

Hz 10

8

f

Filters for 6 A

100

B84111A0000*060

SSB0240-L

dB

α

80

60

40

20

0

104 105 106 107 Hz 108

f

Filters for 20 A

100

B84111A0000*120

SSB0242-3

dB

α

80

60

40

20

0

10

4

10

5

10

6

10

7

Hz 10

8

f

Please read Cautions and warnings and

Important notes at the end of this document. 01/06 7

EMC filters

Cautions and warnings

Important information

Please read all safety and warning notes carefully before installing the EMC filter and putting it into

operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs

are not removed nor their legibility impaired by external influences.

Death, serious bodily injury and substantial material damage to equipment may occur if the appro-

priate safety measures are not carried out or the warnings in the text are not observed.

Using according to the terms

The EMC filters may be used only for their intended application within the specified values in low-

voltage networks in compliance with the instructions given in the data sheets and the data book.

The conditions at the place of application must comply with all specifications for the filter used.

Warnings

■ It shall be ensured that only qualified persons (electricity specialists) are engaged on work such

as planning, assembly, installation, operation, repair and maintenance. They must be provided

with the corresponding documentation.

■ Danger of electric shock. EMC filters contain components that store an electric charge. Danger-

ous voltages can continue to exist at the filter terminals for longer than five minutes even after

the power has been switched off.

■ The protective earth connections shall be the first to be made when the EMC filter is installed and

the last to be disconnected. Depending on the magnitude of the leakage currents, the particular

specifications for making the protective-earth connection must be observed.

■ Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen-

cies that may cause resonances etc. can lead to destruction of the filter housing.

■ EMC filters must be protected in the application against impermissible exceeding of the rated

currents by suitable overcurrent protective.

8 01/06

EMC filters

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As

a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic components

or failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of a passive electronic component could endanger human life or health

(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of

suitable design of the customer application or other action taken by the customer (e.g.

installation of protective circuitry or redundancy) that no injury or damage is sustained by third

parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products.

Consequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,

PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are

trademarks registered or pending in Europe and in other countries. Further information will be

found on the Internet at www.epcos.com/trademarks.

9 01/06