ALZ12F22 - Panasonic - Product.Network

LZ (ALZ)

SPECIFICATIONS

16A LOW PROFILE

POWER RELAY

LZ RELAYS (ALZ)

VDE

mm inch

15.7

12.5

28.8

.618

.492

1.134

15.6

12.5

28.8

.614

.492

1.134

Compliance with RoHS Directive

FEATURES

1. Low proﬁle type with height of 15.7

Slim, low proﬁle type with dimensions of

28.8 (L) × 12.5 (W) × 15.7 (H) mm

1.134 (L) × .492 (W) × .618 (H) inch.

2. High insulation resistance

Superior insulation characteristics have

been achieved by maintaining an

insulation distance between coil and

contacts of at least 10 mm for both

creepage distance and clearances.

Furthermore, anti-surge voltage is 10 kV

and higher. (Supports European

reinforced insulation requirement.)

3. Superior heat resistance

Can be used in ambient temperatures up

to 85°C 185°F for the class B and 105°C

221°F for the class F.

4. Low operating power

Power saved with a nominal operating

power of only 400 mW.

5. Conforms to the various safety

standards:

UL, C-UL, VDE approved.

6. Superior heat resistance and

tracking resistance

EN60335-1 GWT compliant (Tested by

VDE) type available (Excluding TMP

type)

7. TMP type also available.

Contact

Coil

#1 This value can change due to the switching frequency, environmental conditions,

and desired reliability level, therefore it is recommended to check this with the

actual load.

Remarks

* Speciﬁcations will vary with foreign standards certiﬁcation ratings.

*1Measurement at same location as “Initial breakdown voltage” section.

*2Detection current: 10mA

*3Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981

*4Excluding contact bounce time.

*5Half-wave pulse of sine wave: 11 ms; detection time: 10 µs

*6Half-wave pulse of sine wave: 6 ms

*7Detection time: 10 µs

*8The upper limit of the ambient temperature is the maximum temperature that can

satisfy the coil temperature rise value. Refer to 6. Conditions for operation,

transport and storage mentioned in AMBIENT ENVIRONMENT.

*9Class F type is ambient temperature 105°C 221°F.

*Please note that some of the speciﬁcations listed above may not comply with

overseas standards.

Characteristics

Arrangement 1 Form A, 1 Form C

and 1 Form A (TMP type)

Initial contact resistance, max.

(By voltage drop 6V DC 1A) 100mΩ

Contact material AgSnO2 type

Rating

(resistive

load)

Nominal switching capacity 16A 250V AC

Max. switching power 4,000V A

Max. switching voltage 440V AC

Max. switching current 16A

Min. switching capacity#1

(Reference value) 100mA, 5V DC

Expected life

(min.

operations)

Mechanical (at 180 cpm)

1 Form A/1 Form C:

1 × 107

1 Form A (TMP type)

5 × 106

Electrical (at 20 cpm)

(Rated load)

1 Form A/1 Form C:

N.O.: 105, N.C.: 5 × 104

1 Form A (TMP type)

105

Nominal operating power 400mW

Max. operating speed 20 cpm (at rated load)

Initial insulation resistance*1Min. 1,000 MΩ (at 500V DC)

Initial

breakdown

voltage*2

Between open contacts 1,000 Vrms for 1 min.

Between contacts and

coil 5,000 Vrms for 1 min.

Initial surge voltage between contact

and coil*310,000 V

Operate time*4 (at nominal voltage) Max. 15ms (at 20°C 68°F)

Release time (without diode)*4

(at nominal voltage) Max. 5ms (at 20°C 68°F)

Temperature rise (20°C 68°C)

Max. 55°C

with nominal coil voltage

and at 16A contact carrying

current (resistance method)

Shock resistance Functional*5100 m/s2{approx. 10 G}

Destructive*61,000 m/s2{approx. 100 G}

Vibration resistance

Functional*7

1 Form A/1 Form C:

10 to 55Hz

at double amplitude of 0.8mm

1 Form A (TMP type):

10 to 55Hz

at double amplitude of 1.5mm

Destructive 10 to 55Hz

at double amplitude of 1.5mm

Conditions for

operation, transport

and storage*8

(Not freezing and

condensing at low

temperature)

Ambient

temp.

–40°C to +85°C

–40°F to +185°F (Class B)*9

Humidity 5 to 85% R.H.

Unit weight

1 Form A/1 Form C:

Approx. 12 g .42 oz

1 Form A (TMP type):

Approx. 13 g .46 oz

LZ (ALZ)

TYPICAL APPLICATIONS

ORDERING INFORMATION

TYPES

Notes: 1. Tube packing: Inner carton: 20pcs.; Case: 800pcs.

2. Carton packing: Inner carton: 100pcs.; Case: 500pcs.

3. If you desire tube packaging, please order without adding the packaging symbol “W” to the end of the part number. (Note that only carton

packaging is possible for 1 Form A TMP type.)

4. Carton packing symbol “W” is not marked on the relay.

5. EN60335-1 GWT compliant types available. When ordering, please add sufﬁx “T”. (EN60335-1 GWT compliant type is not available for the

TMP types.)

Ex. ALZ21B12T

, ALZ21F12TW

COIL DATA

* Only 1 Form C and 1 Form A types are available for 48 V (excluding TMP type).

Contact arrangement Coil voltage, V DC Carton packing

Class B Class F

1 Form C

5 ALZ11B05W ALZ11F05W

9 ALZ11B09W ALZ11F09W

12 ALZ11B12W ALZ11F12W

18 ALZ11B18W ALZ11F18W

24 ALZ11B24W ALZ11F24W

48 ALZ11B48W ALZ11F48W

1 Form A

5 ALZ21B05W ALZ21F05W

9 ALZ21B09W ALZ21F09W

12 ALZ21B12W ALZ21F12W

18 ALZ21B18W ALZ21F18W

24 ALZ21B24W ALZ21F24W

48 ALZ21B48W ALZ21F48W

1 Form A

(TMP type)

5 ALZ71B05W ALZ71F05W

9 ALZ71B09W ALZ71F09W

12 ALZ71B12W ALZ71F12W

18 ALZ71B18W ALZ71F18W

24 ALZ71B24W ALZ71F24W

Nominal voltage,

V DC

Pick-up voltage,

V DC (max.)

Drop-out voltage,

V DC (min.)

Coil resistance,

Ω (±10%)

Nominal operating

current, mA (±10%)

Nominal operating

power, mW

Maximum allowable

voltage, V DC

5 3.5 0.5 63 80

400

6.5

9 6.3 0.9 203 44.4 11.7

12 8.4 1.2 360 33.3 15.6

18 12.6 1.8 810 22.2 23.4

24 16.8 2.4 1,440 16.7 31.2

48* 33.6 4.8 5,760 8.3 62.4

1) Household electrical appliances

TV, CATV, Audio equipment, Microwave

ovens, and Heaters, etc.

2) Ofﬁce equipment

Copy machines, Packaged air

conditioners, and Vending machines

3) Industrial equipment

Machine tools, Robots, and Temperature

controllers

AEx. LZ 1 1 B 12 W

Notes: 1. Only 1 Form C and 1 Form A types are available for 48 V (excluding TMP type).

2. UL, C-UL, VDE approved type is standard.

3. Sealed type is also available. (Excluding TMP type.) Please consult us.

4. If you desire tube packaging, please order without adding the packaging symbol “W” to the end of the part number.

LZ 1: 1 Form C

2: 1 Form A

7: 1 Form A

(TMP type)

1: Flux-resistant

type

Class B insulation

Class F insulation

05: 5 18: 18

09: 9 24: 24

12: 12 48: 48

Product

name

Contact

arrangement

Protective

construction Coil insulation class Coil voltage,*

V DC

W: Carton packing

Packing style

Nil:

—

EN60335-1 (Conform)

(Excluding TMP type.)

Flame resistance and

tracking resistance

LZ (ALZ)

DIMENSIONS mm inch

1. 1 Form A type

28.8

0.50.5

202.5

15.7

3.5

0.5

12.5

7.5

0.8

1.134

.197

.020.020

.787.098

.618

.138

.020

.492

.295

.031

PC board pattern

Tolerance: ±0.1 ±.004

Schematic (Bottom view)

7.5

6-1.3 dia.

.787

.295

.197

6-.051 dia.

Coil

2. 1 Form C type

28.8

5 5

12.5

7.5

15.7

3.5

0.5 0.8

0.5

202.5

1.134

.197 .197

.492

.295

.618

.138

.020 .031

.020

.787.098

PC board pattern

Tolerance: ±0.1 ±.004

Schematic (Bottom view)

7.5

8-1.3 dia.

.787

.295

.197 .197

8-.051 dia.

Coil

3. 1 Form A (TMP type)

32.5 5.0

0.5

.020

6.4

1.0 1.0

.039 .039

28.8

.2521.134

12.5

1.280 .197 .492

0.8

.031 7.5

.295

15.6

.614 0.4

.016

3.6

.142

14.2

.559

9.5

.374

PC board pattern

Tolerance: ±0.1 ±.004

Schematic (Bottom view)

5.032.5

.1971.280

4-.059 dia.

2-.051 dia. 4-1.5 dia.

2-1.3 dia.

7.5

.295

Coil

LZ (ALZ)

REFERENCE DATA

For Cautions for Use, see Relay Technical Information.

1. Max. switching power (AC resistive load) 2. Max. switching power (DC resistive load) 3. Coil temperature rise

Sample: ALZ11F12, 5pcs.

Measured portion: coil inside

Contact current: 0 A, 16 A

101301000

100

100 440

Contact voltage, V

Contact current, A

100

Contact current, A

Contact voltage, V

1000 120 125110 115105 130 135

Normal

temperature

Normal

temperature

16A

85°C

105°C

85°C

105°C

Temperature rise, °C

Coil applied voltage, %V