G81864408703 - Carlo Gavazzi Group

Du line

Fieldbus Installationbus

Specifications are subject to change without notice (06.09.2006)

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Supply Specifications

Type: Dupline®

FUGA housing

Input type

4 channels

4 inputs

Colour/input type

Supply

Supply Colour Ordering no.

Dupline®White G 8186 4407 703

Light grey G 8186 4408 703

Charcoal grey G 8186 4409 703 without frame

Ordering KeyProduct Description

G8186 440x 703 is a 4-chan-

nel transmitter with 4 contact

inputs and 4 LEDs for indica-

tion of received signal from

the G3486 0058 230 base. It

can be used alone or inte-

grated in the FUGA-55 series

from the Danish supplier LK.

The light switch is part of the

Dupline® “Smart House”

building automation concept

and can be used to control

lights, sunblinds/Venetian

blinds and other functions

supported by the master

generator.

• Dupline® transmitter for building automation applications

• 4 individually programmable push-buttons

• 3 V battery supply (CR2032)

• Channel programming using GAP 1605

• Wall mounting

• Range up to 100 m in open air

• Battery life: up to 5 years at normal use

Type Selection

Input Specifications

Wireless push-button

Transmission frequency 868 MHz

Power supply Battery: CR2032

FUGA wireless light switch

Type G8186 4407 703

General Specifications

Channel coding Via GAP 1605 and special

cable: GAP-TPH-CAB.

Following installation,

the programming can be

changed by removing the

thin cover between the

push-buttons and using the

supplied adapter for the

GAP-TPH-CAB cable.

Out 1-4 Push-button 1-4

Housing (LK FUGA)

Environment

Protection degree IP 20

Pollution degree 3 (IEC 60664)

Operating temperature 0-50°C/32-122°F

Storage temperature -20-70°C/-4-158°F

Humidity

(non-condensing) 20 - 80%

Weight 50 g – without battery

Dimensions 55 x 55 x 11 mm

(including frame)

G 8186 440X 703

Du line

Fieldbus Installationbus

2Specifications are subject to change without notice (06.09.2006)

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Dimensions

Push-button/LED allocation

Programming cable

for GAP 1605 GAP-TPH-CAB

Accessories

Mode of Operation

The G8186 440x 703 light

switch is designed for base

unit G3486 0058 230 and will

only function with this unit.

The wireless G8186 440x 703

light switches are pro-

grammed as standard light

switches G8x10 44xx using a

GAP 1605 (see data sheet for

this unit).

The communication between

G8186 440x 703 light switches

and the G3486 0058 230

base is established in the fol-

lowing way:

- Push the “Mode” button on

the G3486 0058 230 base

until the red LED indicates

association.

- Push the push-button on the

G8186 440x 703 light switch

module that you want to

associate with the G3486

0058 230 base.

Once the association is com-

plete, all 4 LEDs will light up

briefly (approx. 1 second).

If the association fails, e.g.

because the range is exceed-

ed, all LEDs in the light switch

module will light up simulta-

neously for approx. 500 ms.

This also occurs if, under nor-

mal circumstances, it is not

possible to establish connec-

tion between the G3486 0058

230 base and the G8186 440x

703 light switch modules.

It is possible to disable the

communication between the

G3486 0058 230 base and all

the modules with which it is

associated.

- Push the “Mode” button on

the G3486 0058 230 base

until the red “Disable” LED is

lit.

This means that there is no

connection between the

G3486 0058 230 base and its

associations.

To reestablish the connection,

push “Mode” until neither

“Associate” or “Deactivate”

are lit.

Under normal circumstances,

the “Supply” and “Dupline”

LEDs will be lit continuously,

whereas the LED for “Com-

munication” only blinks briefly

when you push an associated

G8186 4407 703 light switch.

The LEDs always follow their

allocated push-button and

cannot be programmed indi-

vidually or removed.

The LED indication provides

confirmation that the commu-

nication is successful.

Communication Example

G82864406703

G81864407703

Mode

Max.

100 m

868 MHz

G34860058230G3800XXXX

Dupline®

1 2 1 2

Power

Dupline®

Associate

Disable