NO2-4FDW-1-A Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*. The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage. Features & Benefits * Suggested OEM equipment connector due to LC front * Shutter with silicone gasket protects optical compatibility connection from dust and dirt * Designed as feedthrough with automatic sealing * Suitable for indoor (studio) camera links considering shutter specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage * Accommodates standard LC connectors on the rear * The low cost of the chassis connector makes it a viable for simple installation alternative to traditional connectors in fixed * Connection on the front side either by rugged * IP65 ingress protection in mated condition with SCDP- opticalCON or standard LC connector * installations * Color coding with SCDP-* according to ANSI/TIA-568.3D Standard: Multimode - black Single mode PC - blue Single mode APC - green NO2-4FDW-1-A 1/3 Technical Information Product Title NO2-4FDW-1-A Gender female Electrical Contact resistance < 7 m Dielectric strength 1,5 kVdc Insulation resistance > 2 G (initial) Rated current per contact 6A Rated voltage < 50 V (1) Ground contact Faston 2.8 x 0.5 (soldering possible) Mechanical Insertion force < 45 N Withdrawal force < 45 N Lifetime > 5000 mating cycles Locking force 1000 N Wiresize Locking device Push-Pull Mounting direction Front mounting Chassis shape D Material Contacts Bronze (CuSn6) Insert Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) Shell Zinc diecast (ZnAl4Cu1) Shell plating Black chromium Split sleeve ceramics NO2-4FDW-1-A 2/3 Environmental Temperature range -40 C to +75 C Optical Insertion loss < 0.4 dB / connection Optical connector LC-Duplex Feedthrough NO2-4FDW-1-A 3/3