HFE1600 Series 1600W 1U Front End Power Supplies Features 1U rackmount containing up to 5 units Internal ORing MOSFET & Current Share High Efficiency Up to 7600W in 1U rack Full array of signals available PMBusTM(I2C) and LAN options Key Market Segments & Applications Specifications Model Input Voltage Range (2) VAC 85 - 265VAC, 47 - 63Hz. See model selector for power derating Input Current (Max) 115/230VAC A 14.2 / 8.1A Inrush Current A <35A Power Factor Correction Meets EN61000-3-2, PF > 0.98 at full load Temperature Coefficient %/C <0.02%/C Overcurrent Protection % 105 - 120% Overvoltage Protection (1) % 110% (Tracking). Cycle AC to reset or utilize Remote On/Off Overtemperature Protection (1) Shutdown with automatic reset. Warning signal provided Hold up time ms >10ms, 115/230VAC Input, 80% loading Leakage Current mA < 0.75 / 1.5mA 100/230VAC, 60Hz Remote Sense Compensation HFE1600-12: 0.25V/wire, HFE1600-24: 0.5V/wire, HFE1600-32: 0.75V/wire, HFE1600-48: 1.0V/wire Indicators AC OK: Green LED, DC OK / Fail: Green / Red LED Remote On/Off Unit ON: 0 - 0.6V or short, OFF: 2 - 15V or open circuit Parallel Operation (1) Yes, single wire current share, up to 90% accuracy (load dependant), up to 10 units AC Fail Signal Open Collector, ON when AC is within 85 - 270VAC DC Good Signal Open Collector, ON when output is above 85 to 95% of setpoint (tracking) Remote Adjust (1) By either external 0 - 5V signal or 1k potentiometer I2C Interface (1) Isolated from output, Add suffix /S, PMBus compatible Auxiliary Output 11.2 - 12.5V, 0.5A, 240mV ripple and noise Operating Temp. (-TB Rack) C -10 to +70C, derate 2%/C from 50 to 60C, 2.5%/C from 60 to 70C Operating Temp. (-IEC320 Rack) C -10 to +60C, derate 2%/C from 50 to 60C Storage Temperature C -30 to +85C Humidity (Non condensing) %RH Operating: 10 - 90%RH, Storage: 10 - 95%RH Cooling Two variable speed internal fans, airflow exits across input/output connector (3) Withstand Voltage I/P to O/P 3kVAC, I/P to GND 2kVAC, O/P to GND: HFE1600-12,-24V 500VAC, HFE1600-48 2250VDC 1 min, (POE) Isolation Resistance M >100M at 25C & 70%RH, Output to Ground 500VDC Vibration (Basic transportation) Meets IEC60068-2-64 Shock (Basic transportation) Meets IEC60068-2-27 Safety Agency Certifications UL60950-1, EN60950-1, CE Mark Line Dip Complies with SEMI F47 (200VAC line only) Conducted and Radiated EMI EN55032 & FCC part 15; Conducted class B, Radiated class A Immunity IEC61000-4-2 (lv 2,3), -3 (lv 2), -4 (lv2), -5 (lv3,4), -6 (lv2), -8 (lv 4), -11 Size (W x H x D) in Power Supply: 3.35 x 1.61 x 11.8", Rack: 17.5 x 1.72 x 14.4" Weight g Power Supply: 1550g, Rack: 4800g Warranty yrs Three Years (1) See installation manual for detailed specifications & test methods (2) Derate output power linearly 1%/V from 100VAC to 85VAC input (3) Reverse air - contact factory 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 72 Disclaimer: us.tdk-lambda.com/lp/legal.htm HFE1600 Series Model Selector Model Output Voltage Adjust Range(1) Max Current (Vin>170VAC) Max Power (Vin>170VAC) Max Current (100