DS04-23121-6E
FUJITSU MEDIA DEVICE
DATA SHEET
ASSP
Mobile Communication Systems
Piezoelectric SAW Dual BPF
(700 MHz to 2000 MHz)
G5/G6 Series (L2/D2 type)
■DESCRIPTION
As the market f or mobile phones contin ues to increase, so has demand f o r smaller size, lighter w eight and lo wer
cost. Dual band phones, such as GSM + PCN and AMPS + PCS, are rising in popularity. To support these requests,
Fujitsu has developed a new series of SAW dual filter (G5/G6 series) incorporating two SA W filters in one package.
For example, Fujitsu can offer a GSM Rx filter and a PCN Rx filter of combination in small 3.8 mm × 3.8 mm
package.
The G5/G6 series of SAW dual filter applies to the 700 MHz to 2000 MHz, frequency range, and are availab le in
two package types : 2 input/2 output type or 1 input/2 output (2 input/1 output) .
■FEATURES
• Two functions are incorp orated in one package
(Useful for multi-band phone and multi-mode phone)
• Ultra compact and light package (3.8 mm × 3.8 mm or 3.0 mm × 3.0 mm)
•50 Ω of input/output impedance
• Low insertion
• 2 in/2 out and 1 in/2 out (2 in/1 out) of package types are available
■PACKAGES
< G5CN >
< G6CN > < G6CH >
G5/G6 Series
2
■PIN ASSIGNMENTS
■PIN DESCRIPTIONS
• 1 in/2 out type
• 2 in/2 out type
Pin Pin name Description
1 IN Input Pin (Common)
2 GND Ground Pin
3 GND Ground Pin
4 GND Ground Pin
5 OUT Filter 2 Output Pin
6 GND Ground Pin
7 OUT Filter 1 Output Pin
8 GND Ground Pin
Pin Pin name Description
1 IN Filter 1 Input Pin
2 GND Ground Pin
3 IN Filter 2 Input Pin
4 GND Ground Pin
5 OUT Filter 2 Output Pin
6 GND Ground Pin
7 OUT Filter 1 Output Pin
8 GND Ground Pin
<
<<
< BOTTOM VIEW >
123
48
765
123
4
8
765
G5CN package
G6CN package G6CH package
G5/G6 Series
3
■INTERNAL BLOCK DIAGRAM
1 7
5
BPF1
BPF2
1
3
7
5
BPF1
BPF2
1 7
− : Pin number
1 in/2 out type 2 in/2 out type
G5/G6 Series
4
■ABSOLUTE MAXIMUM RATINGS
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■RECOMMENDED OPERATING CONDITIONS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
piezoelectric device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use piezoelectric devices within their recommended operating conditionranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
■STANDARD DEVICES
Parameter Symbol Rating Unit
Min Max
Operating temperature Ta −30 +85 °C
Storage temperature Tstg −40 +100 °C
Input power PIN Depends on each design.
See “■ELECTRICAL CHARACTERISTICS”.
Input DC voltage −5+5V
Parameter Symbol Value Unit
Min Max
Operating temperature Ta −30 +85 °C
No. Part number System Frequency (MHz) Part
symbol Input/
Output Remarks
1 FAR-G5CN-877M50-D292 PDC800 Rx 810 MHz to 843 MHz 92 1 in/
2 out 3.0 mm × 3.0 mm
870 MHz to 885 MHz
2 FAR-G6CH-1G8425-L218 EGSM + PCN Rx 925 MHz to 960 MHz 18 2 in/
2 out
3.8 mm × 3.8 mm
Low insertion loss
type
1805 MHz to 1880 MHz
3 FAR-G6CH-1G8425-L227B EGSM + PCN Rx 925 MHz to 960 MHz 27 2 in/
2 out 3.8 mm × 3.8 mm
1805 MHz to 1880 MHz
4 FAR-G6CH-1G9600-L228A EGSM + PCS Rx 925 MHz to 960 MHz 28 2 in/
2 out 3.8 mm × 3.8 mm
1930 MHz to 1990 MHz
5 FAR-G6CN-1G8950-L233 PCS Tx
Split Low 1850 MHz to 1880 MHz 33 2 in/
2 out 3.0 mm × 3.0 mm
High 1880 MHz to 1910 MHz
G5/G6 Series
5
■ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. PDC800 (Rx) 1 in/2 out
Part number : FAR-G5CN-877M50-D292 (Ta = −30 °C to +85 °C)
(Continued)
Parameter Condition Value Unit Remarks
Min Typ Max
Insertion loss 810 MHz to 843 MHz 2.6 4.0 dB
Pass-band ripple 810 MHz to 843 MHz 0.8 2.2 dB
Absolute
stop-band
attenuation
550 MHz to 585 MHz 40 47 dB
585 MHz to 650 MHz 28 32 dB
650 MHz to 780 MHz 20 24 dB
865 MHz to 889 MHz 16 19 dB
889 MHz to 900 MHz 19 23 dB
900 MHz to 1070 MHz 20 27 dB
1070 MHz to 1110 MHz 30 33 dB
Pass-band VSWR
(Return loss) 810 MHz to 828 MHz
(6.5) 2.1
(9.0) 2.8
(dB)
Input power 810 MHz to 828 MHz 15 dBm
Insertion loss 870 MHz to 885 MHz 2.7 3.5 dB
Pass-band ripple 870 MHz to 885 MHz 0.2 1.0 dB
Absolute
stop-band
attenuation
610 MHz to 630 MHz 40 46 dB
630 MHz to 700 MHz 35 40 dB
700 MHz to 840 MHz 20 27 dB
925 MHz to 960 MHz 15 19 dB
960 MHz to 1130 MHz 30 37 dB
1130 MHz to 1145 MHz 32 35 dB
Pass-band VSWR
(Return loss) 870 MHz to 885 MHz
(7.4) 1.9
(10.2) 2.5
(dB)
Input power 870 MHz to 885 MHz 15 dBm
Filter 1Filter 2
G5/G6 Series
6
(Continued)
Part number : FAR-G5CN-877M50-D292
2 : −2.4868 dB
843 MHz
3 : −20.89 dB
870 MHz
4 : −19.238 dB
885 MHz
1
2
34
809.930 000 MHz
1 : −2.3702 dBREF 0 dB5 dB/S21
START 500.000 000 MHz STOP 1 200.000 000 MHz
2 : −34.35 dB
843 MHz
3 : −2.4709 dB
870 MHz
4 : −2.4825 dB
885 MHz
1
4
3
2
809.930 000 MHz
1 : −33.929 dBREF 0 dB5 dB/S21
START 500.000 000 MHz STOP 1 200.000 000 MHz
1 : −37.593 dB
826.5 MHz
3 : −32.036 dB
1.5 GHz
4 : −27.043 dB
2 GHz
2
1
3
4
877.500 000 MHz
2 : −2.7945 dBREF 0 dB5 dB/S21
START .030 000 MHz STOP 3 000.000 000 MHz
2 : −18.27 dB
877.5 MHz
3 : −28.707 dB
1.5 GHz
4 : −24.673 dB
2 GHz
1
3
4
2
826.500 000 MHz
1 : −2.3932 dBREF 0 dB5 dB/S21
START .030 000 MHz STOP 3 000.000 000 MHz
Filter 1 (Pass-band : 810 MHz to 843 MHz)
Filter 2 (Pass-band : 870 MHz to 885 MHz)
G5/G6 Series
7
2. EGSM Rx +
++
+ PCN Rx (2 in/2 out)
Part number : FAR-G6CH-1G8425-L218 (Ta = −30 °C to +85 °C)
(Continued)
Parameter Condition Value Unit Remarks
Min Typ Max
Insertion loss 925 MHz to 960 MHz 2.5 dB Ta = +20 °C to +30 °C
2.2 3.0 dB Ta = −30 °C to +85 °C
Pass-band ripple 925 MHz to 960 MHz 0.8 1.6 dB
Absolute
stop-band
attenuation
DC to 880 MHz 16 18 dB
880 MHz to 915 MHz 10 dB Ta = +20 °C to +30 °C
517dB Ta = −30 °C to +85 °C
980 MHz to 1200 MHz 13 22 dB
1375 MHz to 1410 MHz 20 24 dB
1850 MHz to 1920 MHz 25 32 dB
2775 MHz to 2880 MHz 15 18 dB
Pass-band VSWR
(Return loss) 925 MHz to 960 MHz
(7.4) 2.1
(9.0) 2.5
(dB)
Input power 925 MHz to 960 MHz 23 dBm
Insertion loss 1805 MHz to 1880 MHz 3.2 dB Ta = +20 °C to +30 °C
2.7 3.7 dB Ta = −30 °C to +85 °C
Pass-band ripple 1805 MHz to 1880 MHz 1.1 2.1 dB
Absolute
stop-band
attenuation
DC to 1300 MHz 17 18 dB
1355 MHz to 1430 MHz 18 20 dB
1500 MHz to 1710 MHz 20 22 dB
1710 MHz to 1785 MHz 17 dB Ta = +20 °C to +30 °C
825dB Ta = −30 °C to +85 °C
1920 MHz to 1980 MHz 15 29 dB
3610 MHz to 3760 MHz 15 17 dB
5415 MHz to 5640 MHz 12 17 dB
Pass-band VSWR
(Return loss) 1805 MHz to 1880 MHz
(7.7) 2.0
(9.5) 2.4
(dB)
Input power 1805 MHz to 1880 MHz 13 dBm
Filter 1Filter 2
G5/G6 Series
8
(Continued)
Part number : FAR-G6CH-1G8425-L218
2 : −17.088 dB
915 MHz
3 : −2.2237 dB
925 MHz
4 : −1.6333 dB
960 MHz
1
2
880.000 000 MHz
1 : −29.514 dB
REF 0 dB5 dB/S21 REF 0 dB5 dB/S21
CENTER 900.000 000 MHz SPAN 300.000 000 MHz
2 : −1.7528 dB
942.5 MHz
3 : −33.969 dB
1.885 GHz
4 : −18.422 dB
2.827 GHz
1
3
4
2471.250 000 MHz
1 : −18.68 dB
START .010 000 MHz STOP 3 000.000 000 MHz
4
3
1 : −35.275 dB
REF 0 dB5 dB/S21
CENTER 1 900.000 000 MHz SPAN 600.000 000 MHz
2 : −1.9977 dB
1.842 GHz
3 : −18.487 dB
3.685 GHz
4 : −19.316 dB
5.527 GHz
921.250 000 MHz
1 : −18.215 dB
REF 0 dB5 dB/S21
START .010 000 MHz STOP 6 000.000 000 MHz
3
1
2
4
1 710.000 000 MHz
2 : −36.285 dB
1.785 GHz
3 : −2.7392 dB
1.805 GHz
4 : −2.0623 dB
1.88 GHz
4
3
2
1
Filter 1 (Pass-band : 925 MHz to 960 MHz)
Filter 2 (Pass-band : 1805 MHz to 1880 MHz)
G5/G6 Series
9
3. EGSM Rx +
++
+ PCN Rx (2 in/2 out)
Part number : FAR-G6CH-1G8425-L227B (Ta = −30 °C to +85 °C)
(Continued)
Parameter Condition Value Unit Remarks
Min Typ Max
Insertion loss 925 MHz to 960 MHz 3.0 dB Ta = +20 °C to +30 °C
2.7 3.7 dB Ta = −30 °C to +85 °C
Pass-band ripple 925 MHz to 960 MHz 1.1 2.1 dB
Absolute
stop-band
attenuation
DC to 880 MHz 22 23 dB
880 MHz to 905 MHz 28 32 dB
905 MHz to 915 MHz 11 32 dB Ta = −30 °C to +30 °C
7 dB Ta = +30 °C to +85 °C
980 MHz to 1200 MHz 20 30 dB
1375 MHz to 1410 MHz 30 38 dB
1850 MHz to 1920 MHz 20 26 dB
Pass-band
VSWR
(Return loss) 925 MHz to 960 MHz
(7.7) 1.9
(10.2) 2.4
(dB)
Input power 925 MHz to 960 MHz 23 dBm
Insertion loss 1805 MHz to 1880 MHz 3.5 dB Ta = +20 °C to +30 °C
2.8 3.9 dB Ta = −30 °C to +85 °C
Pass-band ripple 1805 MHz to 1880 MHz 1.3 2.4 dB
Absolute
stop-band
attenuation
DC to 1300 MHz 17 18 dB
1355 MHz to 1430 MHz 17 19 dB
1600 MHz to 1710 MHz 20 22 dB
1710 MHz to 1785 MHz 20 25 dB Ta = −30 °C to +30 °C
10 dB Ta = +30 °C to +85 °C
1920 MHz to 1980 MHz 20 29 dB
3610 MHz to 3760 MHz 15 19 dB
Pass-band
VSWR
(Return loss) 1805 MHz to 1880 MHz
(7.7) 1.9
(10.2) 2.4
(dB)
Input power 1805 MHz to 1880 MHz 13 dBm
Filter 1Filter 2
G5/G6 Series
10
(Continued)
Part number : FAR-G6CH-1G8425-L227B
2 : −1.933 dB
960 MHz
3 : −41.175 dB
880 MHz
4 : −36.157 dB
915 MHz
5 : −30.825 dB
980 MHz
1
2925.000 000 MHz
1 : −2.61 dB
REF 0 dB5 dB/S21 REF 0 dB5 dB/S21
CENTER 950.000 000 MHz SPAN 300.000 000 MHz
2 : −36.855 dB
1.2 GHz
3 : −43.206 dB
1.392 GHz
4 : −26.605 dB
1.885 GHz
5 : −18.698 dB
3 GHz
1
3
4
5
2
942.500 000 MHz
1 : −1.7667 dB
START .010 000 MHz STOP 3 000.000 000 MHz
4
5
3
2 : −1.9922 dB
1.88 GHz
3 : −32.682 dB
1.71 GHz
4 : −35.12 dB
1.785 GHz
5 : −32.384 dB
1.92 GHz
1
21 805.000 000 MHz
1 : −2.7525 dB
REF 0 dB5 dB/S21
CENTER 1 900.000 000 MHz SPAN 600.000 000 MHz
4
3
2 : −18.336 dB
942.5 MHz
3 : −23.109 dB
1.6 GHz
4 : −29.253 dB
3 GHz
5 : −19.832 dB
3.685 GHz
1 842.500 000 MHz
1 : −1.8206 dB
REF 0 dB5 dB/S21
START 50.000 000 MHz STOP 4 000.000 000 MHz
3
1
2
4
5
5
Filter 1 (Pass-band : 925 MHz to 960 MHz)
Filter 2 (Pass-band : 1805 MHz to 1880 MHz)
G5/G6 Series
11
4. EGSM Rx +
++
+ PCN Rx (2 in/2 out)
Part number : FAR-G6CH-1G9600-L228A (Ta = −30 °C to +85 °C)
(Continued)
Parameter Condition Value Unit Remarks
Min Typ Max
Insertion loss 925 MHz to 960 MHz 3.0 dB Ta = +20 °C to +30 °C
2.7 3.7 dB Ta = −30 °C to +85 °C
Pass-band ripple 925 MHz to 960 MHz 1.1 2.1 dB
Absolute
stop-band
attenuation
DC to 880 MHz 22 23 dB
880 MHz to 905 MHz 28 32 dB
905 MHz to 915 MHz 11 32 dB Ta = −30 °C to +30 °C
7dB Ta = +30 °C to +85 °C
980 MHz to 1200 MHz 20 dB Ta = −30 °C to +20 °C
25 32 dB Ta = +20 °C to +85 °C
1375 MHz to 1410 MHz 30 38 dB
1850 MHz to 1920 MHz 20 26 dB
Pass-band VSWR
(Return loss) 925 MHz to 960 MHz
(7.7) 1.9
(10.2) 2.4
(dB)
Input power 925 MHz to 960 MHz 23 dBm
Insertion loss 1930 MHz to 1990 MHz 3.9 dB Ta = +20 °C to +30 °C
3.5 4.2 dB Ta = −30 °C to +85 °C
Pass-band ripple 1930 MHz to 1990 MHz 1.9 2.6 dB
Absolute
stop-band
attenuation
DC to 1850 MHz 20 22 dB
1850 MHz to 1910 MHz 710dB Ta = −30 °C to +30 °C
5dB Ta = +30 °C to +85 °C
2010 MHz to 2100 MHz 5dB Ta = −30 °C to +20 °C
610dB Ta = +20 °C to +85 °C
2500 MHz to 2700 MHz 20 25 dB
3000 MHz to 4000 MHz 15 18 dB
Pass-band VSWR
(Return loss) 1930 MHz to 1990 MHz
(7.0) 2.1
(9.0) 2.6
(dB)
Input power 1930 MHz to 1990 MHz 13 dBm
Filter 1Filter 2
G5/G6 Series
12
(Continued)
Part number : FAR-G6CH-1G9600-L228A
2 : −2.0124 dB
960 MHz
3 : −42.756 dB
880 MHz
4 : −29.411 dB
915 MHz
5 : −33.886 dB
980 MHz
1
2925.000 000 MHz
1 : −2.598 dBREF 0 dB
5 dB/S21 REF 0 dB5 dB/
S21
CENTER 950.000 000 MHz SPAN 300.000 000 MHz
2 : −36.855 dB
1.2 GHz
3 : −43.206 dB
1.392 GHz
4 : −26.605 dB
1.885 GHz
5 : −18.698 dB
3 GHz
1
3
4
5
2
942.500 000 MHz
1 : −1.7667 dB
START .010 000 MHz STOP 3 000.000 000 MHz
4
5
3
2 : −2.882 dB
1.99 GHz
3 : −27.201 dB
1.85 GHz
4 : −10.67 dB
1.91 GHz
5 : −10.63 dB
2.01 GHz
1
21 930.000 000 MHz
1 : −3.4467 dB
REF 0 dB5 dB/S21
CENTER 1 900.000 000 MHz SPAN 600.000 000 MHz
4 5
32 : −23.502 dB
1 GHz
3 : −30.967 dB
1.5 GHz
4 : −25.266 dB
2.7 GHz
5 : −18.573 dB
4 GHz
1 960.000 000 MHz
1 : −1.8342 dB
REF 0 dB5 dB/S21
START .010 000 MHz STOP 4 000.000 000 MHz
3
1
24
5
Filter 1 (Pass-band : 925 MHz to 960 MHz)
Filter 2 (Pass-band : 1930 MHz to 1990 MHz)
G5/G6 Series
13
5. PCS Tx split band (low band +
++
+ high band dual) (2 in/2 out)
Part number : FAR-G6CN-1G8950-L233 (Ta = −30 °C to +85 °C)
(Continued)
Parameter Condition Value Unit Remarks
Min Typ Max
Insertion loss 1850 MHz to 1880 MHz 2.1 3.2 dB
Pass-band ripple 1850 MHz to 1880 MHz 0.4 1.5 dB
Absolute
stop-band
attenuation
DC to 1700 MHz 20 23 dB
1700 MHz to 1760 MHz 28 38 dB
1930 MHz to 1960 MHz 30 38 dB
2000 MHz to 2100 MHz 30 35 dB
2100 MHz to 3000 MHz 25 35 dB
Pass-band VSWR
(Return loss) 1850 MHz to 1880 MHz
(8.5) 1.4
(15.6) 2.2
(dB)
Input power 1850 MHz to 1880 MHz 13 dBm
Insertion loss 1880 MHz to 1910 MHz 2.4 3.2 dB
Pass-band ripple 1880 MHz to 1910 MHz 0.6 1.5 dB
Absolute
stop-band
attenuation
DC to 1700 MHz 21 24 dB
1700 MHz to 1760 MHz 28 37 dB
1800 MHz to 1830 MHz 15 26 dB
1960 MHz to 1990 MHz 30 37 dB
2000 MHz to 2100 MHz 30 38 dB
2100 MHz to 3000 MHz 25 32 dB
Pass-band VSWR
(Return loss) 1880 MHz to 1910 MHz
(8.5) 1.5
(14.0) 2.2
(dB)
Input power 1880 MHz to 1910 MHz 13 dBm
Filter 1Filter 2
G5/G6 Series
14
(Continued)
Part number : FAR-G6CN-1G8950-L233
2 : −2.0299 dB
1.88 GHz
3 : −38.911 dB
1.93 GHz
4 : −48.145 dB
1.96 GHz
5 : −44.14 dB
1.76 GHz
1
21 850.000 000 MHz
1 : −1.9431 dB
REF 0 dB5 dB/S21 REF 0 dB5 dB/S21
CENTER 1 880.000 000 MHz SPAN 600.000 000 MHz
2 : −23.224 dB
750 MHz
3 : −38.618 dB
1.7 GHz
4 : −35.44 dB
2.1 GHz
5 : −39.19 dB
2.5 GHz
1
345
2
1 865.000 000 MHz
1 : −1.8127 dB
START .030 000 MHz STOP 3 000.000 000 MHz
5
3
4
2 : −2.1745 dB
1.91 GHz
3 : −37.657 dB
1.96 GHz
4 : −41.046 dB
1.99 GHz
5 : −26.235 dB
1.83 GHz
1
21 880.000 000 MHz
1 : −2.3225 dB
REF 0 dB5 dB/S21
CENTER 1 880.000 000 MHz SPAN 600.000 000 MHz
5
2 : −24.234 dB
750 MHz
3 : −39.277 dB
1.7 GHz
4 : −38.691 dB
2.1 GHz
5 : −34.735 dB
2.5 GHz
1 895.000 000 MHz
1 : −1.986 dB
REF 0 dB5 dB/S21
START .030 000 MHz STOP 3 000.000 000 MHz
3
1
2
45
4
3
Filter 1 (Pass-band : 1850 MHz to 1880 MHz)
Filter 2 (Pass-band : 1880 MHz to 1910 MHz)
G5/G6 Series
15
‘
■MEASURMENT CIRCUIT
• 1 in/2 out type (G5CN filters)
• 2 in/2 out type (G6CH filters)
■RECOMMENDED EXTARNAL CIRCUIT OF 1 IN/2 OUT TYPE
(G5CN filters)
IN OUT
**
50 Ω
IN
OUT 50 Ω
1 7
5
8 6
2 341 7
5
8 6
2 34
− : Pin number
1 8
FAR-G5CN-877M50-D292; 10 nH*:
< Filter 1 > < Filter 2 >
IN OUT
50 Ω50 Ω
IN OUT
50 Ω50 Ω
1 7
5
8 6
2
34
3 5
7
8 6
2
14
− : Pin number
1 8
< Filter 1 > < Filter 2 >
7
5
86432
1
IN OUT1
OUT2
FAR-G5CN-877M50-D292; 10 nH*:
*
G5/G6 Series
16
■PART NUMBER DESIGNATION
[Designation example]
< G5CN FILTER >
< G6CH FILTER >
< G6CN FILTER >
■MARKING
(1) Frequency : This specifies the nominal center frequency of higher frequency side using six
alphanumeric.
M (for MHz) indicates the decimal point.
[Example] 877M50 ⇒ 877.5 MHz
(2) Part symbol : 01 to 99 (Numbers specified by Fujitsu)
(3) Packing : Y; 1 k pcs/reel
X ; 5 k pcs/reel
(1) Frequency : This specifies the nominal center frequency of higher frequency side using six
alphanumeric.
G (for GHz) indicates the decimal point.
[Example] 1G8800 ⇒ 1.88 GHz
(2) Part symbol : 01 to 99 (Numbers specified by Fujitsu)
(3) Packing : T; 1 k pcs/reel
R; 3 k pcs/reel
(1) Frequency : This specifies the nominal center frequency of higher frequency side using six
alphanumeric.
G (for GHz) indicates the decimal point.
[Example] 1G8950 ⇒ 1.895 GHz
(2) Part symbol : 01 to 99 (Numbers specified by Fujitsu)
(3) Packing : Y; 1 k pcs/reel
X ; 5 k pcs/reel
FAR-G5CN- -D2 -
(1) (2) (3)
FAR-G6CH- -L2 -
(1) (2) (3)
FAR-G6CN- -L2 -
(1) (2) (3)
F
B19
35
Logo
Date code
Index
Part symbol
Lot number
G5/G6 Series
17
■PACKAGE DIMENSIONS
3.0
3.8
3.6
3.8
3.6
3.0
1.2 Max
1.6 Max1.0
1.9
0.64
0.64
1.0
0.750.75 0.6
1.2 1.2
1.27 1.27
1.58 0.95
0.6
1.2
4 − R0.2
4 − R0.3
4 − R0.2
123
7
84
6 5
1 2 3
7
84
6 5
0.6
< G5CN package >
< G6CN package > < G6CH package >
Dimensions in mm.
G5/G6 Series
18
■RECOMMENDED LAND PATTERN
3.0
1.2
0.2
0.6
1.20 1.20
0.7
0.7
1.5
3.0
1.5 0.950.750.2
3.8
3.8
1.6 1.0
0.70
1.0 1.4
1.27 1.27
0.4
0.4
0.7
Dimensions in mm.
< G5CN package >
< G6CN package > < G6CH package >
G5/G6 Series
19
■PACKING
1. Reel Dimensions
2. P acking Style
+ 2.0
− 0.0
+ 2.0
− 0.0
1.5 Min
φ 12.8 Min
φ 20.2 Min
R 0.58
C
A
φ 80
B
Dimensions in mm.
< G5CN filter >
< G6CN filter >
< G6CH filter >
Type A B C Volume
Yφ 250 9.5 ± 0.5 13.8 Max 1 k pcs
Xφ 250 9.5 ± 0.5 13.8 Max 5 k pcs
Type A B C Volume
Tφ 250 12.4 18.4 Max 1 k pcs
Rφ 330 12.4 18.4 Max 3 k pcs
Rulling side 1 PIN
Reel side Rulling side
G5/G6 Series
20
3. Tape Dimensions
4. Peel strength of top cover tape
4.0 ± 0.1
2.0 ± 0.05
3.5 ± 0.05
3.3 ± 0.1
φ1.5
+0.1
−0.0
φ 1.0 Min
8.0 ± 0.2
8.0 ± 0.1
1.75 ± 0.1
3.3 ± 0.1
0.3 ± 0.05
1.3 ± 0.1
4.0 ± 0.1
2.0 ± 0.1
5.5 ± 0.1
4.2 ± 0.1
φ1.5 +0.1
−0.0
φ1.6
0.3
12.0 ± 0.3
8.0 ± 0.1
1.75 ± 0.1
1.8
4.2 ± 0.1
< G5CN filters >
< G6CN filters >
< G6CH filters >
Dimensions in mm.
165 ° to 180 °
Direction of pulling Speed 300 mm/min
Embossment carrier type tape
Peel off by the force of 0.1 N to 1.0 N under the condition at the right.
(Conforms to EIA.)
G5/G6 Series
21
■RECOMMENDED REFLOW PROFILE
■NOTE
Mass-produced product order is accepted by a unit of 1000.
240
210
150 Pre-Heating
10 s
60 s
60 s ∼ 90 s
Time (s)
Temperature (°C)
Heating rate
1°C/s to 4 °C/s
Air cooling
G5/G6 Series
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU MEDIA
DEVICES sales representatives before ordering.
The information, such as descriptions of function and application
circuit examples, in this document are presented solely for the
purpose of reference to show examples of operations and uses of
FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA
DEVICES does not warrant proper operation of the device with
respect to use based on such information. When you develop
equipment incorporating the device based on such information, you
must assume any responsibility arising out of such use of the
information. FUJITSU MEDIA DEVICES assumes no liability for
any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of
function and schematic diagrams, shall not be construed as license
of the use or exercise of any intellectual property right, such as
patent right or copyright, or any other right of FUJITSU MEDIA
DEVICES or any third party or does FUJITSU MEDIA DEVICES
warrant non-infringement of any third-party’s intellectual property
right or other right by using such information. FUJITSU MEDIA
DEVICES assumes no liability for any infringement of the
intellectual property rights or other rights of third parties which
would result from the use of information contained herein.
The products described in this document are designed, and
manufactured as contemplated for general use, including without
limitation, ordinary industrial use, general office use, personal use,
and household use, but are not designed, developed and
manufactured as contemplated (1) for use accompanying fatal risks
or dangers that, unless extremely high safety is secured, could have
a serious effect to the public, and could lead directly to death,
personal injury, severe physical damage or other loss (i.e., nuclear
reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile
launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial
satellite).
Please note that FUJITSU MEDIA DEVICES will not be liable
against you and/or any third party for any claims or damages arising
in connection with above-mentioned uses of the products.
Any electronic devices have inherently a certain rate of failure. You
must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.
F0308
FUJITSU LIMITED Printed in Japan
