PTFB210801FA Confidential, Limited Internal Distribution Thermally-Enhanced High Power RF LDMOS FET 80 W, 28 V, 2110 - 2170 MHz Description The PTFB210801FA LDMOS FET is designed for use in multistandard cellular power amplifier applications in the 2110 to 2170 MHz frequency band. Features include input and output matching, high gain and thermally-enhanced packages with earless flanges. Manufactured with Infineon's advanced LDMOS process, this device provides excellent thermal performance and superior reliability. Features Two-carrier WCDMA Drive-up VDD = 28 V, IDQ = 750 mA, = 2140 MHz, 10 MHz Spacing, 8dB PAR ACPR (dBc) -20 -25 -30 * Broadband internal matching * Typical single-carrier WCDMA performance at 2170 MHz, 28 V - Average output power = 25 W - Linear Gain = 18.5 dB - Efficiency = 32.5% - Adjacent channel power = -37 dBc * Typical CW performance, 2170 MHz, 28 V - Output power at P1dB = 80 W - Efficiency = 55% * Integrated ESD protection * Capable of handling 10:1 VSWR @ 28 V, 80 W (CW) output power * Pb-free and RoHS compliant 45 Adj Lower Adj Upper Alt Efficiency 40 35 30 25 -35 20 -40 Efficiency (%) -15 PTFB210801FA Package H-37265-2 15 -45 10 -50 5 36 37 38 39 40 41 42 43 44 45 46 47 48 Output Power (dBm) RF Characteristics Two-carrier WCDMA Measurements (tested in Infineon test fixture) VDD = 28 V, IDQ = 750 mA, POUT = 20 W average, 1 = 2160 MHz, 2 = 2170 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 8 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps 18 18.5 -- dB Drain Efficiency hD 28 31 -- % Intermodulation Distortion IMD -- -30 -28 dBc All published data at TCASE = 25C unless otherwise indicated ESD: Electrostatic discharge sensitive device--observe handling precautions! Data Sheet 1 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution DC Characteristics Characteristic Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 65 -- -- V Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS -- -- 1.0 A Drain Leakage Current VDS = 63 V, VGS = 0 V IDSS -- -- 10.0 A On-State Resistance VGS = 10 V, VDS = 0.1 V RDS(on) -- 0.05 -- W Operating Gate Voltage VDS = 30 V, IDQ = 750 mA VGS 2.3 3.0 3.3 V Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS -- -- 1.0 A Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 65 V Gate-Source Voltage VGS -6 to +10 V Junction Temperature TJ 200 C Storage Temperature Range TSTG -40 to +150 C Thermal Resistance (TCASE = 70C, 80 W CW) RqJC 0.50 C/W Ordering Information Type and Version Package Type Package Description Shipping PTFB210801FA V1 H-37265-2 Ceramic open-cavity, earless flange Tray PTFB210801FA V1 R250 H-37265-2 Ceramic open-cavity, earless flange Tape & Reel, 250 pcs Data Sheet 2 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Typical Performance (data taken in a production test fixture) Two-carrier WCDMA vs. Frequency Single Side Small Signal CW Gain & Input Return Loss VDD = 28 V, IDQ = 750 mA, 10 MHz Spacing, PAR = 8 dB VDD = 28 V, IDQ = 750 mA Adj 2110 MHz -30 Eff. 2110 MHz Eff. 2170 MHz 30 25 -35 20 -40 Gain -5 18.0 Power Gain (dB) ACPR (dBc) -25 35 0 19.0 40 Alt 2170 MHz Efficiency (%) -20 20.0 45 Alt 2110 MHz 15 17.0 -10 16.0 15.0 -15 14.0 13.0 -20 IRL 12.0 -45 10 11.0 -50 5 10.0 -25 -30 1.7 36 37 38 39 40 41 42 43 44 45 46 47 48 Input Return Loss (dB) Adj 2170 MHz -15 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Frequency (GHz) Output Power (dBm) CW Performance vs. Temperature CW Gain & Efficiency vs. Output Power & VDD VDD = 28 V, IDQ = 750 mA, = 2140 MHz = 2140 MHz, IDQ = 750 mA 19.5 60 Gain 19.0 55 60 19.5 50 19.0 40 18.5 30 18.0 20 35 17.0 Efficiency 16.5 -25C 25 C 85 C 16.0 30 17.5 25 0 39 40 41 42 43 44 45 46 47 48 49 50 51 39 40 41 42 43 44 45 46 47 48 49 50 51 Output Power (dBm) Data Sheet 10 V DD = 30 V V DD = 28 V 17.0 20 Efficiency (%) 40 17.5 Efficiency (%) 45 18.0 Power Gain (dB) 50 18.5 Gain (dB) 20.0 Output Power (dBm) 3 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Typical Performance (cont.) CW Performance at Various IDQ CW Sweep at P1dB vs. Frequency = 2170 MHz VDD = 28 V, IDQ = Varying VDD = 28 V, IDQ = 750 mA, T = 25C 19.5 55 Gain (dB) 19 50 Gain 18.5 45 18 40 17.5 35 17 Efficiency 16.5 30 2110 MHz 2140 MHz 2170 MHz 19 18.5 Gain (dB) 60 Drain Efficiency (%) 20 18 620mA 720mA 17.5 820mA 25 16 920mA 17 20 39 40 41 42 43 44 45 46 47 48 49 50 51 39 40 41 42 43 44 45 46 47 48 49 50 51 Average Output Power (dBm) Output Power (dBm) Broadband Circuit Impedance D Z Source Z Load G S Z Source W Frequency Data Sheet Z Load W MHz R jX R jX 2110 16.3 -4.6 2.2 -4.1 2140 13.6 -4.0 2.3 -4.1 2170 11.3 -2.9 2.2 -4.4 4 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Reference Circuit S4 C802 1000 pF 8 7 3 4 1 6 2 5 C803 1000 pF R804 2000 Ohm 1 C801 1000 pF S3 R803 1200 Ohm 3 2 S5 TL124 R801 3000 Ohm 2 C 4 1 S B TL122 3 E R802 1300 Ohm R102 2000 Ohm TL125 2 TL121 TL126 3 2 TL127 TL123 1 1 3 3 1 2 C101 10000000 pF TL120 S2 1 4 3 L2 22 nH 2 TL101 TL102 2 3 1 2 3 1 TL103 R101 10 Ohm TL107 TL129 C105 15 pF TL130 TL131 C102 15 pF TL109 TL132 TL110 TL112 RF_IN 1 TL108 TL105 TL111 TL104 TL106 2 3 1 2 3 4 R103 10 Ohm C104 1.5 pF GATE DUT (Pin G) R104 10 Ohm TL119 L1 22 nH TL117 TL115 1 3 1 3 2 2 S1 2 4 TL113 3 1 C103 10000000 pF TL118 TL116 TL128 TL114 2 3 2 1 3 b210801fa_bdin_03-15-2011 1 Reference circuit input schematic for = 2170 MHz C201 10000000 pF TL209 TL205 TL203 C205 22000000 pF TL221 2 3 1 2 TL228 TL227 TL210 3 1 2 TL211 1 3 4 C204 18 pF C211 4710000 pF TL202 C206 2.7 pF DRAIN DUT (Pin D) TL218 TL207 TL224 2 3 1 TL213 TL214 2 TL219 TL223 3 1 TL212 1 C209 15 pF TL216 TL215 RF_OUT 2 3 4 4 C207 2.7 pF C208 2.2 pF TL204 C202 4710000 pF TL208 TL201 C212 18 pF TL206 TL222 4 1 3 TL220 3 2 1 TL217 1 2 TL226 TL225 b 2 1 0 8 0 1 f a _ b d o u t _ 0 3 - 1 5 - 2 0 1 1 3 2 C203 10000000 pF C210 22000000 pF Reference circuit output schematic for = 2170 MHz Data Sheet 5 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Reference Circuit (cont.) Description DUT PTFB210801FA PCB 0.508 mm [.020"] thick, er = 3.66, Rogers 4350, 1 oz. copper Electrical Characteristics at 2170 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Input TL101, TL117 0.023 , 35.71 W1 = 1.905, W2 = 1.905, W3 = 1.905 W1 = 75, W2 = 75, W3 = 75 TL102, TL115 0.012 , 35.71 W1 = 1.905, W2 = 1.905, W3 = 1.016 W1 = 75, W2 = 75, W3 = 40 TL103 0.021 , 54.17 W = 1.016, L = 1.778 W = 40, L = 70 TL104 W1 = 9.398, W2 = 1.270, W3 = 9.398, W4 = 1.270 W1 = 370, W2 = 50, W3 = 370, W4 = 40 TL105 W1 = 1.024, W2 = 9.398 W1 = 40, W2 = 370 TL106 W1 = 9.398, W2 = 9.398 W1 = 370, W2 = 370 TL107 0.050 , 53.93 W = 1.024, L = 4.153 W = 40, L = 164 TL108 0.025 , 9.59 W = 9.398, L = 1.905 W = 370, L = 75 TL109 0.019 , 53.93 W = 1.024, L = 1.605 W = 40, L = 63 TL110 0.092 , 53.93 W = 1.024, L = 7.696 W = 40, L = 303 TL111 0.072 , 53.93 W = 1.024, L = 5.994 W = 40, L = 236 TL112 0.011 , 53.93 W1 = 1.024, W2 = 1.024, W3 = 0.889 W1 = 40, W2 = 40, W3 = 35 TL113 0.212 , 47.12 W = 1.270, L = 17.577 W = 50, L = 692 TL114, TL121 0.039 , 47.12 W1 = 1.270, W2 = 1.270, W3 = 3.200 W1 = 50, W2 = 50, W3 = 126 TL116, TL122, TL123 0.016 , 35.71 W1 = 1.905, W2 = 1.905, W3 = 1.270 W1 = 75, W2 = 75, W3 = 50 TL118, TL120 0.004 , 35.71 W = 1.905, L = 0.361 W = 75, L = 14 TL119 0.021 , 54.17 W = 1.016, L = 1.778 W = 40, L = 70 TL124 0.039 , 35.71 W = 1.905, L = 3.172 W = 75, L = 125 TL125 0.048 , 47.12 W = 1.270, L = 4.013 W = 50, L = 158 TL126 0.071 , 47.12 W = 1.270, L = 5.906 W = 50, L = 233 TL127, TL128 0.005 , 47.12 W = 1.270, L = 0.406 W = 50, L = 16 W1 = 1.024, W2 = 2.032 W1 = 40, W2 = 80 TL129 TL130, TL131 0.012 , 34.08 TL132 W = 2.032, L = 1.016 W = 80, L = 40 W1 = 2.032, W2 = 1.024 W1 = 80, W2 = 40 table continued on page 7 Data Sheet 6 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Reference Circuit (cont.) Electrical Characteristics at 2170 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils W = 50, L = 30 Output TL201, TL203 0.009 , 47.12 W = 1.270, L = 0.762 TL202, TL204 0.064 , 47.12 W = 1.270, L = 5.334 W = 50, L = 210 TL205, TL206 W1 = 1.905, W2 = 2.540, W3 = 1.905 W4 = 2.540 W1 = 75, W2 = 100, W3 = 75, W4 = 100 TL207 W1 = 9.398, W2 = 1.270, W3 = 9.398 W4 = 1.270 W1 = 370, W2 = 50, W3 = 370, W4 = 50 TL208, TL209 W = 1.270 W = 50 TL210 W1 = 0.002, W2 = 0.005, Offset = 0.001 W1 = 2, W2 = 184, Offset = 55 W = 184, L = 534 TL211, TL225 0.172 , 17.67 W = 4.674, L = 13.564 TL212 0.011 , 53.93 W1 = 1.024, W2 = 1.024, W3 = 0.889 W1 = 40, W2 = 40, W3 = 35 W1 = 9.398, W2 = 0.889, W3 = 9.398 W4 = 0.889 W1 = 370, W2 = 35, W3 = 370, W4 = 35 TL213 TL214 0.016 , 9.59 W = 9.398, L = 1.219 W = 370, L = 48 TL215 0.032 , 53.93 W = 1.024, L = 2.713 W = 40, L = 107 TL216 0.185 , 53.93 W = 1.024, L = 15.491 W = 40, L = 610 TL217, TL228 0.002 , 35.71 W1 = 1.905, W2 = 1.905, W3 = 0.127 W1 = 75, W2 = 75, W3 = 5 TL218 W1 = 9.398, W2 = 9.398 W1 = 370, W2 = 370 TL219 W1 = 1.024, W2 = 9.398 W1 = 40, W2 = 370 TL220, TL227 0.068 , 35.71 W = 1.905, L = 5.588 W = 75, L = 220 TL221, TL222 0.016 , 35.71 W1 = 1.905, W2 = 1.905, W3 = 1.270 W1 = 75, W2 = 75, W3 = 50 TL223 0.012 , 53.93 W = 1.024, L = 0.991 W = 40, L = 39 TL224 0.011 , 9.59 W = 9.398, L = 0.813 W = 370, L = 32 W1 = 0.002, W2 = 0.005, Offset = -0.001 W1 = 2, W2 = 184, Offset = -55 TL226 Data Sheet 7 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Reference Circuit (cont.) Circuit Assembly Information Test Fixture Part No. LTN/PTFB210801FA Find Gerber files for this test fixture on the Infineon Web site at http://www.infineon.com/rfpower RO4350, .020 RO4350, .020 (60) C803 C802 R804 R802 (60) C801 R803 C205 S5 + S3 S4 S2 R801 R102 C201 C101 C204 L2 C211 R101 C105 C102 C206 C104 R103 C209 C208 R104 C207 C202 L1 C212 C103 C203 S1 C210 PTFB210801_OUT_01 PTFB210801_IN_01 b 2 1 0 8 0 1 f a _ c d _ 0 3 - 1 5 - 2 0 1 1 Reference circuit assembly diagram (not to scale) Data Sheet 8 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Reference Circuit (cont.) Components Information Component Description Suggested Manufacturer P/N C101, C103 Capacitor, 10 F Digi-Key 490-4393-2-ND C102, C105 Chip capacitor, 15 pF ATC 800A150GT C104 Chip capacitor, 1.5 pF ATC 800A1T5GR C801, C802, C803 Capacitor, 1000 pF Digi-Key PCC1772CT-ND L1, L2 Inductor, 22 nH Coilcraft 0805CS-220X_BG R101, R103, R104 Resistor, 10 Digi-Key P10GCT-ND R102, R804 Resistor, 2000 Digi-Key P2.0KECT-ND R801 Resistor, 3000 Digi-Key P3.0KECT-ND R802 Resistor, 1300 Digi-Key P1.3KGECT-ND R803 Resistor, 1200 Digi-Key P1.2KGECT-ND S1, S2 EMI Suppression Capacitor Digi-Key NFM18PS105R0J3D S3 Potentiometer, 2k Digi-Key 3224W-202ECT-ND S4 Voltage Regulator Digi-Key LM7805 S5 Transistor Digi-Key BCP56 C201, C203 Capacitor, 10 F Digi-Key 587-1818-2-ND C202, C211 Chip capacitor, 4.71 F ATC 490-1864-2-ND C204, C212 Chip capacitor, 18 pF ATC 800A180JT C205, C210 Capacitor, 22 F Digi-Key PCE4444TR-ND C206, C207 Chip capacitor, 2.7 pF ATC 800A2R7BT C208 Chip capacitor, 2.2 pF ATC 800A2R2BT C209 Chip capacitor, 15 pF ATC 800A150GT Input Output Data Sheet 9 of 11 Rev. 01, 2011-03-30 PTFB210801FA Confidential, Limited Internal Distribution Package Outline Specifications Package H-37265-2 45 X 2.03 [.080] 2X 7.11 [.280] D FLANGE 10.16 [.400] 6. ALL FOUR CORNERS 2.66.51 [.105.020] LID 10.16.25 [.400.010] C L 15.49.51 [.610.020] G H- 37265 - 2_po _ 02- 18 - 2010 4X R0.63 [R.025] MAX C L 10.16.25 [.400.010] SPH 1.57 [.062] 3.61.38 [.142.015] 1.02 [.040] 10.16 [.400] S Diagram Notes--unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances 0.127 [.005] unless specified otherwise. 4. Pins: D = drain, S = source, G = gate. 5. Lead thickness: 0.10 +0.051/-0.025 [.004 +.002/-.001]. 6. Exposed metal plane on top and bottom of ceramic insulator. 7. Gold plating thickness: 1.14 0.38 micron [45 15 microinch] Find the latest and most complete information about products and packaging at the Infineon Internet page http://www.infineon.com/rfpower Data Sheet 10 of 11 Rev. 01, 2011-03-30 PTFB210801FA V1 Confidential, Limited Internal Distribution Revision History: 2011-03-30 Previous Version: none Page Subjects (major changes since last revision) Data Sheet We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: highpowerRF@infineon.com To request other information, contact us at: +1 877 465 3667 (1-877-GO-LDMOS) USA or +1 408 776 0600 International Edition 2011-03-30 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2011 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com/rfpower). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet 11 of 11 Rev. 01, 2011-03-30