Solid State Relay OCMOS FET PS7160-1A,PS7160L-1A 6-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET -NEPOC Series- DESCRIPTION The PS7160-1A and PS7160L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7160L-1A has a surface mount type lead. FEATURES * 1 channel type (1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * Ordering number of taping product: PS7160L-1A-E3, E4: 1 000 pcs/reel <R> * Pb-Free product * Safety standards * UL approved: File No. E72422 * BSI approved: No. 8245/8246 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10289EJ02V0DS (2nd edition) Date Published July 2006 NS CP(K) The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 1996, 2006 PS7160-1A,PS7160L-1A PACKAGE DIMENSIONS (in millimeters) PS7160-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 7.62 3.50.3 3.30.3 4.150.3 6.50.5 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS7160L-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 3.50.3 0.10+0.10 -0.05 6.50.5 1.340.1 0.25 M 2 0.90.25 2.54 9.600.4 Data Sheet PN10289EJ02V0DS PS7160-1A,PS7160L-1A <R> MARKING EXAMPLE No. 1 pin Mark PS7160-1A NL601 Country Assembled Type Number Assembly Lot N L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code Data Sheet PN10289EJ02V0DS 3 PS7160-1A,PS7160L-1A <R> ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS7160-1A PS7160-1A-A PS7160L-1A PS7160L-1A-A PS7160L-1A-E3 PS7160L-1A-E3-A PS7160L-1A-E4 PS7160L-1A-E4-A Pb-Free Magazine case 50 pcs Standard products PS7160-1A (UL, BSI, CSA Embossed Tape 1 000 pcs/reel approved) *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10289EJ02V0DS *1 PS7160-1A,PS7160L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 600 V IL 90 (120) mA Power Dissipation Peak Forward Current MOS FET *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 130 (160) Connection C 200 (210) *3 ILP 250 mA PD 560 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -40 to +100 C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 s, Duty Cycle = 1% *2 Conditions: IF 2 mA. Conditions: IF 5 mA. Load current ( ) value is. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) - 4 6 5 4 6 5 IL 4 IL IL L L IL + I L - + VL (DC) + VL (DC) - *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-3 shorted together, 4-6 shorted together. Data Sheet PN10289EJ02V0DS 5 PS7160-1A,PS7160L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff VD = 600 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz 110 LED On-state Current IFon IL = 90 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA Current Coupled pF 2.0 mA 42 50 Ron2 IF = 10 mA, IL = 90 mA, t 10 ms 33 50 Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 1.5 k, 0.8 1.5 Turn-off Time *1, 2 toff PW 10 ms 0.06 0.2 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 ms 9 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton toff *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms. <R> Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10289EJ02V0DS PS7160-1A,PS7160L-1A TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM LORD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 0 25 7585 50 100 75 50 25 0 -25 100 0 25 Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 100 250 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA f = 1 MHz Output Capacitance Cout (pF) 1.4 1.2 1.0 0.8 -25 0 25 50 75 100 200 150 100 50 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LORD CURRENT vs. LORD VOLTAGE 10-3 150 IF = 10 mA 10 -4 100 TA = 85 C Load Current IL (mA) Off-state Leakage Current ILoff (A) 7585 50 Ambient Temperature TA (C) 1.6 Forward Voltage VF (V) 125 10-5 10-6 10 -7 25 C 50 -4.0 10-8 10-9 0 -2.0 0 2.0 4.0 -50 -100 100 200 300 400 500 600 -150 Load Voltage VL (V) Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10289EJ02V0DS 7 PS7160-1A,PS7160L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0 25 50 0 100 75 41 42 43 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 VO = 5 V VO = 5 V Turn-off Time toff (ms) Turn-on Time ton (ms) 6.0 4.0 2.0 0 10 20 30 40 0.4 0.3 0.2 0.1 0 Forward Current IF (mA) 40 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 30 TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 20 15 10 5 5 0.6 0.7 0.8 0.9 0 1.0 Turn-on Time ton (ms) 0.04 0.08 Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. 8 20 Forward Current IF (mA) 30 0 10 Data Sheet PN10289EJ02V0DS PS7160-1A,PS7160L-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10289EJ02V0DS 9 PS7160-1A,PS7160L-1A TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS7160L-1A-E3 PS7160L-1A-E4 Outline and Dimensions (Reel) 2.00.5 R 1.0 21.00.8 1001.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10289EJ02V0DS 15.9 to 19.4 Outer edge of flange PS7160-1A,PS7160L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) <R> (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10289EJ02V0DS 11 PS7160-1A,PS7160L-1A <R> USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10289EJ02V0DS PS7160-1A,PS7160L-1A * The information in this document is current as of July, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10289EJ02V0DS 13 PS7160-1A,PS7160L-1A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604