SNAP-AOV-27 - OPTO 22 - Product.Network

SNAP Analog Output

Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE

1

DATA SHEET

Form 1066-150130

SNAP Analog Output Modules

Features

Resolution = 0.004% of nominal range

Rugged packaging

Convenient pluggable wiring

Powered by a single 5-volt supply

Factory calibrated; no user adjustment necessary

Out-of-range indication

Operating temperature -20 °C to 70 °C

Accepts up to 22 to 14 AWG wire

Description

SNAP I/O analog output modules are part of Opto 22’s SNAP

PAC System. They mount on SNAP PAC racks along with other

I/O modules and a SNAP PAC brain or R-series controller, either

a standard wired or a Wired+Wireless™ model.

These software-configurable output modules handle a wide

variety of signal levels. Most provide dual-channel packaging.

All SNAP analog modules are factory calibrated. Part numbers

ending in -FM are Factory Mutual approved.

SNAP analog output modules have an on-board

microprocessor to provide module-level intelligence, which

makes them an ideal choice for Original Equipment

Manufacturers (OEMs). For additional information about the

stand-alone operation of SNAP analog modules, please refer

to the SNAP I/O Module Integration Guide (Opto 22 form #876).

SNAP racks use a retention rail locking system that holds

modules securely to the rack. Normally, a hold-down screw is

not required. However, for applications that require additional

module security, each module can be secured on the rack

with two 4-40 by ½-inch standard machine screws.

Specifications and wiring diagrams are in module descriptions

starting on page 2. Dimensional drawings begin on page 13.

Notes for legacy hardware: Most SNAP analog output

modules can also be used with legacy SNAP Simple, SNAP

Ethernet, and SNAP Ultimate brains and with serial SNAP

brains such as the B3000. These modules can be mounted on

SNAP B-series or M-series racks. Exceptions are noted in

individual module descriptions.

Isolation

All SNAP analog output modules are isolated from all other

modules and from the I/O processor (SNAP PAC brain or on-

the-rack controller). On most dual-channel modules, the two

channels are not isolated from each other. Exceptions: SNAP-

AOA-23-iSRC, SNAP-AOD-29, and SNAP-AOD-29-HFi have two

isolated channels.

Transformer isolation prevents ground loop currents from

flowing between field devices and causing noise that

produces erroneous readings. Ground loop currents are

caused when two grounded field devices share a connection,

and the ground potential at each device is different.

Isolation also provides protection for sensitive control

electronics from industrial field signals.

IMPORTANT: Since most SNAP dual-channel analog output

modules provide two single-ended output channels with a

common reference, these dual channels are transformer and

optically isolated from other modules, but not from each

other. However, SNAP-AOA-23-iSRC, SNAP-AOD-29, and

SNAP-AOD-29-HFi do have channel-to-channel isolation.

Part Numbers

Part Description See

SNAP-AOA-23 Dual-channel analog output,

current loop, 4–20mA pg 4

SNAP-AOA-23-iSRC

SNAP-AOA-23-iSRC-FM*

Isolated dual-channel analog

output, current loop, 4–20

mA, with loop sourcing pg 5

SNAP-AOA-28 Dual-channel analog output,

current loop, 0–20 mA pg 8

SNAP-AOA-3 Single-channel current

output, 4–20mA pg 2

SNAP-AOD-29 Isolated dual-channel analog

time-proportional digital out-

put, 5 to 60 VDC pg 9

SNAP-AOD-29-HFi Isolated dual-channel analog

TPO or PWM digital output,

2.5 to 24 VDC pg 10

SNAP-AOV-25 Dual-channel analog voltage

output, 0 to 10 VDC pg 6

SNAP-AOV-27 Dual-channel analog voltage

output, -10 to +10 VDC pg 7

SNAP-AOV-5 Single-channel analog volt-

age output, 0 to 10 VDC pg 3

SNAP-AOVA-8 8-channel analog multifunc-

tion output, voltage or current pg 11

* Factory Mutual approved

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

2

DATA SHEET

Form 1066-150130

Description

The SNAP-AOA-3 module provides a single channel of

transformer and optically-isolated digital to analog conversion.

The module has a true differential (floating) output that

eliminates ground loops and has a nominal output range of 4 mA

to 20 mA.

Specifications:

Part Number Description

SNAP-AOA-3 Single-channel analog output 4–20 mA

Input 12-bit serial data

Output 4 to 20 mA (floating)

Span 16 mA

Resolution 3.9 microamps

Response Time

(% of span/delta I/ delta time) 99.9%/15.98 mA/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common

Mode Voltage 250 V

Common Mode Resistance >1000 M W

Accuracy 0.1% of span

Gain Temperature Coefficient 50 PPM/ °C

Offset Temperature Coefficient 20 PPM/ °C

Module Power Requirements 5 Volts DC (±0.15 ) @ 140 mA

Loop Power Requirements 10 Volts DC (min) to

32 Volts DC (max)

Max. Loop Resistance

(Ohms)

@ Loop Supply 250

10V 350

12V 950

24V 1350

32V

Max. Loop Resistance formula

(Loop Voltage - 5)

0.02

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, RoHS, DFARS

Warranty Lifetime

Single-Channel Current Output

4–20 mA

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

3

Description

The SNAP-AOV-5 module provides a single channel of

transformer and optically-isolated digital to analog conversion.

The module has a true differential (floating) output that

eliminates ground loops and has a nominal output range of 0

VDC to +10 VDC.

Specifications:

Part Number Description

SNAP-AOV-5 Single-channel analog output voltage

0 to 10 VDC

Input 12-bit serial data

Output 0 to +10 Volts DC (floating)

Span 10 Volt span

Resolution 2.44 mV

Response Time

(% of span/delta V/delta time) 99.9%/19.98 V/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common

Mode Voltage 250 V

Common Mode Resistance >1000 Megohms

Load Current 10 mA (floating)

Short Circuit Current Continuous 125 mA (typical)

Accuracy 0.1% of span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coefficient 20 PPM/°C

Power Requirements 5 Volts DC @ 150 mA

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, RoHS, DFARS

Warranty Lifetime

Single-Channel Voltage Output

0–10 VDC

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

4

DATA SHEET

Form 1066-150130

Description

The SNAP-AOA-23 module provides a nominal output range of 4

mA to 20 mA. An external loop power source is required for the

current loops.

NOTE: Both channels share common reference terminals.

Common reference terminals are 3, 4, 7, and 8.

Specifications:

Part Number Description

SNAP-AOA-23 Dual-channel analog output current loop

4–20 mA

Input 12-bit serial data

(each channel)

Outputs 4 to 20 mA (each channel)

Span 16 mA

Resolution 3.9 microamps

Response Time

(% of span/delta I/ delta time) 99.9%/15.98 mA/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common

Mode Voltage 250 V

Common Mode Resistance >1000 Megohms

Accuracy 0.1% of Span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coefficient 20 PPM/°C

Module Power Requirements 5 Volts DC (±0.15) @ 150 mA

Loop Power Requirements 8 VDC (min) to

32 Volts DC (max)

Max. Loop

Resistance (Ohms)

@ Loop Supply 250

8V 450

12V 650

15V 1050

24V 1450

32V

Max. Loop Resistance formula

(Loop Voltage - 3)

0.02

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS, DFARS

Warranty Lifetime

Dual-Channel Current Output

4–20 mA

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

5

Specifications:

Part Number Description

SNAP-AOA-23-iSRC

SNAP-AOA-23-iSRC-FM Isolated dual-channel analog

4–20 mA output with loop sourcing

Input 12-bit serial data (each channel)

Outputs 4 to 20 mA (each channel)

Span 16 mA

Resolution 3.9 microamps

Response Time

(% of span/delta I/ delta time) 99.9%/15.98 mA/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating

Common Mode Voltage 250 V

Common Mode Resistance >1000 Megohms

Accuracy 0.1% of Span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coeffi-

cient 20 PPM/°C

Max. Loop Resistance

@ Loop Supply 950 Ohms

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 Volts DC (±0.15) @ 200 mA

Power Requirements -

Loop Power (Input)

From separate field connector;

24 VDC nominal (70 mA max)

@ 24 V input, both loops

@ 20 mA), 30 VDC maximum

Loop Power (Output) 24 VDC (±1.5 V) @ 20 mA

Open loop: 30 V maximum

Shorted loop: 24 mA nominal

LED on top of module Indicates that there is power to the

24v source supply 2-pin connector

Agency Approvals CE, RoHS, DFARS

FM (SNAP-AOA-23-iSRC-FM

only)

Torque, ho ld-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Warranty Lifetime

Isolated Dual-Channel Current

Output 4–20 mA

Description

The SNAP-AOA-23-iSRC and SNAP-AOA-23-iSRC-FM

modules provide a nominal output range of 4 mA to 20 mA.

These modules include built-in loop sourcing capability.

The SNAP-AOA-23-iSRC-FM is Factory Mutual approved.

With the connection of a single 24 V power supply, these

modules source two 24 V loops. The loop sources are

internally connected to the individual outputs.

The two channels and their loop sources are isolated from

each other; they do not share any field connection. In

addition, each loop source is current limited so that an

external fault on one loop will not affect the other.

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

6

DATA SHEET

Form 1066-150130

Description

The SNAP-AOV-25 module provides a nominal output range of 0 to

+10 volts. Each channel can supply +5 mA of load current.

NOTE: Both channels share a common reference terminal.

Specifications:

Part Number Description

SNAP-AOV-25 Dual-channel analog output voltage 0 to 10 VDC

Input 12-bit serial data

(each channel)

Outputs 0 to +10 Volts DC

Span 10 Volts

Resolution 2.44 mV

Response Time

(% of span/delta V/delta time) 99.9%/19.98 V/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common Mode

Voltage 250 V

Common Mode Resistance >1,000 Megohms

Load Current (nominal) 5 mA (each channel)

Short Circuit Output Current Continu-

ous 40 mA per channel

Accuracy 0.1% of Span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coefficient 20 PPM/°C

Power Requirements 5 Volts DC (±0.15) @ 150

mA

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS, DFARS

Warranty Lifetime

Dual-Channel Voltage Output

0–10 VDC

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

7

Description

The SNAP-AOV-27 module provides a nominal output range of

-10 to +10 volts. Each channel can supply ±5 mA of load current.

NOTE: Both channels share a common reference terminal.

Specifications:

Part Number Description

SNAP-AOV-27 Dual-channel analog voltage output

-10 VDC to +10 VDC

Input 12-bit serial data

(each channel)

Outputs -10 to +10 Volts DC

Span 20 Volts

Resolution 4.88 mV

Response Time

(% of span/delta V/delta time) 99.9%/19.98 V/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common Mode

Voltage 250 V

Common Mode Resistance >1,000 Megohms

Load Current (nominal) 5 mA (each channel)

Short Circuit Output Current Continu-

ous 40 mA per channel

Accuracy 0.1% of Span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coefficient 20 PPM/°C

Power Requirements 5 Volts DC (±0.15)

@ 150 mA

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS,

DFARS

Warranty Lifetime

Dual-Channel Voltage Output

-10 to +10 VDC

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

8

DATA SHEET

Form 1066-150130

Description

The SNAP-AOA-28 module provides a nominal output range of 0

mA to 20 mA. An external loop power source is required for the

current loops.

NOTE: Both channels share a common reference terminal.

Specifications:

Part Number Description

SNAP-AOA-28 Dual-channel analog output current loop

0–20 mA

Input 12-bit serial data (each channel)

Outputs 0 to 20 mA (each channel)

Span 20 mA

Resolution 4.9 microamps

Response Time

(% of span/delta I/ delta time) 99.9%/15.98 mA/3 mS

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating Common

Mode Voltage 250 V

Common Mode Resistance >1000 Megohms

Accuracy 0.1% of Span

Gain Temperature Coefficient 50 PPM/°C

Offset Temperature Coefficient 20 PPM/°C

Module Power Requirements 5 Volts DC (±0.15 ) @ 150 mA

Loop Power Requirements 8 Volts DC (min) to

32 Volts DC (max)

Max. Loop

Resistance (Ohms)

@ Loop Supply 250

8V 450

8V 650

12V 1050

24V 1450

32V

Max. Loop Resistance formula

(Loop Voltage - 5)

0.02

Ambient Tempe rature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS, DFARS

Warranty Lifetime

Dual-Channel Current Output

0–20 mA

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

9

Both TPO channels also have individual “inhibit” inputs dedicated

to turning off the output, a useful feature in temperature and

interlock control applications. The channels are optically isolated

from each other.

NOTE: The SNAP-AOD-29 module cannot be used in a SNAP PAC

IO4AB system. Instead, use the built-in TPO functionality available

on all SNAP-PAC brains that support IO4AB.

Specifications:

Part Number Description

SNAP-AOD-29 Isolated dual-channel analog Time-propor-

tional digital output 5 to 60 VDC

Input 12-bit serial data (each channel)

Switched Output

at 45 °C Ambient

at 70 °C Ambient

5 to 60 Volts DC

0.5 A

0.2 A

TPO Resolution 12-bit

Each bit = Period/4095

1 millisecond/bit default

Period Range

0.251 sec. to 64.25 sec.

(0.251 sec for Ethernet-based

I/O units)

0.251 seconds module default

Period Accuracy ± 0.5%

Period Resolution .251 second

Inhibit Inputs

On

Off

4.0 Volts DC at 1.0 mA

(32 Volts DC max.

1.0 Volt DC

Maximum Operating Common

Mode Voltage 250 V

Common Mode Resistance >1,000 Megohms

Timebase Temperature Coeffi-

cient 50 PPM/°C

Power Requirements 5 Volts DC (±0.15) @ 150 mA

Ambient Te mperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, FM, CE, RoHS, DFARS

Warranty Lifetime

Dual-Channel Time-Proportional Output

Voltage 5–60 VDC

Description

The SNAP-AOD-29 module provides two channels of time-

proportional output (TPO). The outputs are used to switch or

control DC loads such as lamps or indicators, solenoids, relay

coils, and PLC logic. Each TPO channel can switch 0.5 A of

load current ranging from 5 VDC to 60 VDC, over a period

range of .25 seconds to 64.25 seconds.

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

10

DATA SHEET

Form 1066-150130

Specifications

Part Number Description

SNAP-AOD-29-HFi Isolated dual-channel analog time-propor-

tional or pulse-width modulation digital out-

put, 2.5 to 24 VDC

Switched Output 2.5 to 24 VDC at 100 mA supplied

externally

Maximum Survivable

Switch Voltage 60 VDC

Peak Current 1.0 A (t < 10 milliseconds)

Period Range 0.00001 sec to 64.25 sec

Percent Range 0-100%

Period Resolution 20.8 nanoseconds

Percent Resolution 0.024% (12-bit)

Period Accuracy +- 0.005% of period

Pull-up Voltage 4.5 to 5.0 VDC

Pull-up Resistor 200 Ohm

Minimum Output Pulse

Width 1 microsecond

Maximum Operating Com-

mon Mode Voltage 250 V Continuous

Isolation: Channel to

Channel 250V Continuous

1500V Transient

Power Consumption 1.5 W (300 mA @ 5 V)

Ambient Temperature:

Operating

Storage -20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

Dual-Channel Time-Proportional Output

Voltage 2.5–24 VDC, 0 to 100 kHz

Description

The SNAP-AOD-29-HFi is a TPO (time-proptional output) or

PWM (pulse-width modulation) module that converts an

analog value to a digital on/off output. The outputs are used

to switch or control DC loads such as lamps or indicators,

solenoids, relay coils, and PLC logic. Each channel can

switch 100 mA of load current ranging from 2.5 VDC to

24 VDC supplied externally, over a period range of 0.00001

seconds to 64.25 seconds.

The two channels are optically isolated from each other.

Five volts through a 200 Ohm pull-up resistor are provided

internally for each channel for use with TTL loads. This

feature means you don’t have to provide the pull-up voltage

supply required for each output.

This module requires a SNAP PAC controller or brain with

SNAP PAC firmware version 9.3c or higher. It cannot be used

with legacy controllers or brains.

NOTE: The SNAP-AOD-29-HFi module cannot be used in a

SNAP PAC IO4AB system. Instead, use the built-in TPO

functionality available on all SNAP-PAC brains that support

IO4AB.

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

11

8-Channel Multifunction Voltage/

Current Output

The SNAP-AOVA-8 is an analog output module with 8

channels, individually configurable for any one of six voltage

or current output ranges:

Each range has 4096 counts (12 bits ) of resolution.

The SNAP-AOVA-8 requires a 24 VDC excitation voltage

brought in through the field connector on the top of the

module. This voltage is internally isolated with transformer

and digital data isolators, and then used to source all channels.

Because all current is sourced from within the module using

the 24 VDC excitation, current outputs are self-sourcing and

cannot be used with an external loop supply or in loops that

are loop-powered or have a self-sourcing device in the loop.

Each channel is individually current or voltage limited and not

affected by opens or shorts on adjacent channels. Connect

both wires from the module, so that a change in output on

one channel will not affect another channel.

Specifications

All negative output terminals on the module are tied together

internally. To prevent ground loops, use loads with isolated

signal inputs or use devices with the same power source, so

they have a common ground.

To wire the module, a 6-foot-long SNAP-HD-20F6 cable is

required. The cable has a 20-pin connector at the module end

and flying leads for wiring to field devices. See wiring

information on page 12.

You can also use a SNAP-TEX-32 breakout board for wiring

convenience. See form 1756, the SNAP TEX Cables & Breakout

Boards Data Sheet, for more information.

The SNAP-AOVA-8 requires a SNAP PAC brain or rack-mounted

controller with firmware version R9.4b or higher. It cannot be

used with legacy controllers or brains.

Specifications (continued)

Voltage Self-sourcing Current

0 to 5 VDC

0 to 10 VDC

-5 to +5 VDC

-10 to +10 VDC

4 to 20 mA

0 to 20 mA

Excitation Range 18 TO 32 VDC

Excitation Current Required 200mA @ 32VDC, 250mA @

24VDC, 350mA @ 18VDC

24V Excitation Fault Recovery

Time 15 mS nominal

Power Requirement (from the

rack) 5 VDC (±0.15) @ 150 mA

Maximum Operating Common

Mode Voltage 250 volts

Isolation 1500 V (transient)

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Data Refresh Time 9 mS nom (update 1 ch/ms)

Ambient Temperature:

Operating

Storage -20 to 70° C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

Vo ltage Outputs

Output Range (Resolution)

0 to 5 VDC (1.22 mV)

0 to 10 VDC (2.44 mV)

-5 to +5 VDC (2.44 mV)

-10 to +10 VDC (4.88 mV)

Load Current +/-10 mA min. each voltage

output channel)

Short Circuit Current 16 mA Typ.

Accuracy 0.1% of span

Drift:

Gain Temperature Coefficient

Offset Temperature Coefficient 30 PPM / ° C

15 PPM / ° C

Current Outputs

Output Range (Resolution) 4 to 20 mA (4 microamps)

0 to 20 mA (5 microamps)

Maximum Loop Resistance 750 Ohms (each current out-

put channel )

Open Circuit Volts 27 VDC max.

(24 VDC typical)

Accuracy 0.1% of span

Drift:

Gain Temperature Coefficient

Offset Temperature Coefficient 30 PPM / ° C

15 PPM / ° C

Part Number Description

SNAP-AOVA-8 8-channel analog multifunction output,

voltage or current

SNAP-HD-20F6 6 ft. (1.8 m) wiring cable for SNAP-AOVA-

8 module, with flying leads (required)

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

12

DATA SHEET

Form 1066-150130

8-Channel Multifunction Voltage/Current Output (continued)

Wiring

Wire colors - Excitation

Wire colors - Output points

NOTE: Yellow with purple and

purple with yellow wires are not used.

24 VDC Color

–Black

+ White with Black

Ch –/+ Color

0–Blue

+ White with Blue

1–Pink

+ White with Pink

2–Gray

+ W hite with Gray

3– Green

+ White with Green

4– Orange

+White with

Orange

5–Red

+ White with Red

6– Purple

+ W hite with Purple

7–Yellow

+ White with Yellow

SNAP-AOVA-8 Module (from top)

For more information on the SNAP-HD-20F6

cable, see form 1756, the SNAP TEX Cables &

Breakout Boards Data Sheet.

LED - indicates excitation

24 VDC excitation

Not used

Ch 0

Ch 1

Ch 2

Ch 3

Ch 4

Ch 5

Ch 6

Ch 7

–+

–

+

All negative output terminals are tied

together internally.

All current from any output is sourced

from the module. No external

excitation supplies allowed.

SNAP-HD-20F6 Cable

Outputs

24 VDC Power Supply

This supply is isolated

from the module outputs.

Current input

–

+

Voltage input

–

+

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

13

Dimensional Drawings

All Modules except SNAP-AOA-23-iSRC, SNAP-AOA-23-iSRC-FM, and SNAP-AOVA-8

Note: The SNAP-AOD-29 time-proportional output (TPO) module has integral LEDs for monitoring and

troubleshooting the module’s outputs and inhibit inputs.

-

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

14

DATA SHEET

Form 1066-150130

Dimensional Drawings

SNAP-AOA-23-iSRC and SNAP-AOA-23-iSRC-FM only

-

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

15

Dimensional Drawings

SNAP-AOVA-8 only

TOP VIEW OF MODULE

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules

PAGE

16

DATA SHEET

Form 1066-150130

Dimensional Drawings

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

All Modules

SNAP Analog Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Analog Output Modules DATA SHEET

Form 1066-150130

PAGE

17

Dimensional Drawing

All Modules

SNAP Analog Module Mounted on a SNAP Rack

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-131203

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, flexible, easy-to-use

hardware and software products for industrial automation,

energy management, remote monitoring, and data acquisition

applications.

groov

puts your system on your mobile device. With zero

programming, you can build mobile operator interfaces to

monitor and control systems from Allen-Bradley, Siemens,

Schneider Electric, Modicon, and many more. Web-based

groov

puts mobile-ready gadgets at your fingertips. Tag them from your

existing tag database, and they automatically scale for use on any

device with a modern web browser. See

groov.com

for more

information and your free trial.

SNAP PAC System

Designed to simplify the typically complex

process of selecting and applying an

automation system, the SNAP PAC

System consists of four integrated

components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

Programmable automation controllers

(PACs) are multifunctional, modular controllers based on open

standards.

Opto 22 has been manufacturing PACs for over two decades. The

standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-

series, and the software-based SoftPAC™ all handle a wide range

of digital, analog, and serial functions for data collection, remote

monitoring, process control, and discrete and hybrid

manufacturing.

SNAP PACs are based on open Ethernet and Internet Protocol (IP)

standards, so you can build or extend a system easily, without the

expense and limitations of proprietary networks and protocols.

Wired+Wireless™ models are also available.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite provides full-featured, cost-

effective control programming, HMI (human machine interface)

development and runtime, OPC server, and database connectivity

software for your SNAP PAC System.

Control programming includes both easy-to-learn flowcharts and

optional scripting. Commands are in plain English; variables and I/

O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website,

www.opto22.com

. PAC Project

Professional, available for separate purchase, adds one SoftPAC,

OptoOPCServer, OptoDataLink, options for controller redundancy

or segmented networking, and support for legacy Opto 22 serial

mistic™

I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence for

I/O processing and communications. Brains offer analog, digital,

and serial functions, including thermocouple linearization; PID

loop control; and optional high-speed digital counting (up to 20

kHz), quadrature counting, TPO, and pulse generation and

measurement.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module,

depending on the type of module and your

needs. Analog, digital, and serial modules are

all mixed on the same mounting rack and

controlled by the same processor (SNAP PAC

brain or rack-mounted controller).

Quality

Founded in 1974, Opto 22 has established a

worldwide reputation for high-quality products.

All are made in the U.S.A. at our manufacturing

facility in Temecula, California. Because we

test each product twice before it leaves our

factory, rather than only testing a sample

of each batch, we can guarantee most

solid-state relays and optically isolated I/O

modules for life.

Free Product Support

Opto 22’s California-based Product Support Group offers free,

comprehensive technical support for Opto 22 products. Our staff

of support engineers represents decades of training and

experience. Support is available in English and Spanish by phone

or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide, troubleshooting

and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our Temecula,

California headquarters, and you can

register online

.

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators. For

more information, contact Opto 22 headquarters at 800-321-

6786 or 951-695-3000, or visit our website at

www.opto22.com

.

www.opto22.com