SPEC NO: DSAG1318 REV NO: V.5 DATE: MAR/23/2011 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000460
SURFACE MOUNT DISPLAY
Part Number: ACSC04-41SGWA-F01
Super Bright Green
Features
z0.4 inch digit height.
zLow current operation.
zExcellent character appearance.
zMechanically rugged.
zGray face,white segment.
zPackage:400pcs/ reel.
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG1318 REV NO: V.5 DATE: MAR/23/2011 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000460
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
ACSC04-41SGWA-F01 Super Bright Green (GaP) White Diffused 2200 4700 Common Cathode, Rt.
Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Green 568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA
C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA
IR Reverse Current Super Bright Green 10 uA VR=5V
Parameter Super Bright Green Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG1318 REV NO: V.5 DATE: MAR/23/2011 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000460
Super Bright Green ACSC04-41SGWA-F01
SPEC NO: DSAG1318 REV NO: V.5 DATE: MAR/23/2011 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000460
ACSC04-41SGWA-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG1318 REV NO: V.5 DATE: MAR/23/2011 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000460
PACKING & LABEL SPECIFICATIONS ACSC04-41SGWA-F01
