1-5504566-4 - Tyco Electronics

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors

Fiber Optic Products Catalog

LC Connector Kits

Description Fiber Type Housing Boot Used with Individual Pack Bulk Pack

Color Color Part Number Part Number

900 µm Buffered 1918384-1 1918384-2

Singlemode Blue Blue 1.6-2.0 mm Jacketed 1918266-1 1918266-2

3.0 mm Jacketed 1918374-1 1918374-2

900 µm Buffered 1918385-3 1918385-5

Beige Aqua 1.6-2.0 mm Jacketed 1918267-3 1918267-5

Simplex 3.0 mm Jacketed 1918375-3 1918375-5

900 µm Buffered 1918385-4 1918385-6

Multimode Beige Black 1.6-2.0 mm Jacketed 1918267-4 1918267-6

3.0 mm Jacketed 1918375-4 1918375-6

900 µm Buffered 1918385-1 1918385-2

Beige Beige 1.6-2.0 mm Jacketed 1918267-1 1918267-2

3.0 mm Jacketed 1918375-1 1918375-2

900 µm Buffered 1918387-1 1918387-2

Singlemode Blue Blue 1.6-2.0 mm Jacketed 1918372-1 1918372-2

3.0 mm Jacketed 1918376-1 1918376-2

900 µm Buffered 1918388-3 1918388-5

Beige Aqua 1.6-2.0 mm Jacketed 1918373-3 1918373-5

Duplex 3.0 mm Jacketed 1918377-3 1918377-5

900 µm Buffered 1918388-4 1918388-6

Multimode Beige Black 1.6-2.0 mm Jacketed 1918373-4 1918373-6

3.0 mm Jacketed 1918377-4 1918377-6

900 µm Buffered 1918388-1 1918388-2

Beige Beige 1.6-2.0 mm Jacketed 1918373-1 1918373-2

3.0 mm Jacketed 1918377-1 1918377-2

Duplex Clip For use with Black — — 1754371-1 —

Simplex Kits

Note: All part numbers are RoHS compliant.

One-Piece LC Connector

Product Facts

■Singlemode Telecordia

GR-326 tested (Report

#501-652)

■Multimode TIA/EIA 568-B.3

tested

■Singlemode and Multimode

are compatible with both

anaerobic adhesives and

heat cure epoxy adhesives

■Universal Connector Body

■Common body for simplex

or duplex

■Common body for jumper

or buffer applications

■Fewer parts to inventory

■Duplex Clip

■Field installable

■Makes simplex

assemblies duplex

■Correct polarity errors

■Used for both jumpers

and buffered fiber

applications

■One-Piece Body

■Improved rigidity

■Improved side-load

strength

Performance Characteristics

Insertion Loss — 0.2 dB Typical

Reflectance — -55 dB Typical

Operating Temperature —

-40°C to +75°C

Durability — 500 Cycles

■Color coded to comply

with 568 C

■Aqua for 50/125 laser

optimized

■Black for standard 50/125

■Beige for 62.5/125

■Blue for singlemode

■Widened Thumb Latch

■Increased hit area

■Increased bend strength

■Ramped front latch for

snag resistance

■Diamond Knurled Crimp Body

■Increased tensile proof

strength

■Identical to

Tyco Electronics’

SC/FC design

(1.6-2.0 shown)

Widened Thumb Latch

Duplex Clip

Diamond Knurled Crimp Body

Universal One-Piece

Connector Body

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

LC Connector Component Selection Chart (bulk packaged)

Simplex Connector Crimp Eyelet Strain Relief Strain Relief

Fiber Type Assembly & Duplex Clip Cable Size with Heat Shrink Crimp Eyelet Description Part Number

Dust Cap (see chart below)

1.6-2.0 mm 6374150-1 — Straight/Bend Limiting 1588153-X

1.6-2.0 mm 6374150-1 — Angled 1374737-X

1.6-2.0 mm 6374150-1 — 50 Degree Angle 6457543-X

Singlemode 1828456-1 1754371-1 2.4 mm 6588189-1 — Straight/Bend Limiting 1588153-X

(blue hsg.) 2.4 mm 6588189-1 — Angled 1374737-X

2.4 mm 6588189-1 — 50 Degree Angle 6457543-X

3.0 mm — 5504118-3 Straight 502716-X

900 µm — — 900 µm Buffer, 10 mm 6588612-X

1.6-2.0 mm 6374150-1 — Straight/Bend Limiting 1588153-X

1.6-2.0 mm 6374150-1 — Angled 1374737-X

1.6-2.0 mm 6374150-1 — 50 Degree Angle 6457543-X

Multimode 1754625-1 1754371-1 2.4 mm 6588189-1 — Straight/Bend Limiting 1588153-X

(beige hsg.) 2.4 mm 6588189-1 — Angled 1374737-X

2.4 mm 6588189-1 — 50 Degree Angle 6457543-X

3.0 mm — 5504118-3 Straight 502716-X

900 µm — — 900 µm Buffer, 10 mm 6588612-X

Strain Relief Color

Base Part Beige Blue Black Red Aqua

Number

1588153 -5 -2 -3 — -8

1374737 -2 -1 -3 — —

6457543 -1 -2 -4 — —

502716 -3 -4 -1 -5 -11

6588612 -1 -2 -5 -4 -8

Crimp Tool Dieset only - 1588175-1

Crimp Tool with Dieset - 1588176-1

Instruction Sheet: 408-8675

http://www.tycoelectronics.com/documents

1374737-X 6457543-X

6588612-X 1588153-X

Termination Kit - 1754462-1

Upgrade Kit for Anaerobic

terminations - 1754603-1

One-Piece LC Connector Family

Note: All of the above are also available in simplex.

Note: All part numbers are RoHS compliant.

3.0

Jacket

1.6 - 2.4 mm

Jacket

250 / 900 µm

Buffered Fiber

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors (Continued)

Fiber Optic Products Catalog

Tight Jacketed

LC Connectors

Product Facts

■Multimode or singlemode

■Simplex or duplex

■Tested using MIL-PRF-

85045/16 2.0 mm cable

■LC Commercial Item

Description (CID) interim

approval by the Naval

Surface Warfare Center,

Dahlgren Division

Application

■In Flight Networks

■Shipboard Applications

■Aero Market

The tight jacketed LC

Connectors are non pull-

proof versions of the stan-

dard connectors that are

designed for use with tight

construction cable. Unlike

standard connectors, this

design allows the jacket

and buffer to move together,

reducing the chances of

micro-bends and fiber

breakage.

Fiber Type Kit Part Number Description

Singlemode 6828095-X Simplex, 1.6–2.0 mm

(blue body & straight boot) 6828130-X Duplex, 1.6–2.0 mm

1918228-X Simplex, 2.4 mm

Multimode 6828094-X Simplex, 1.6–2.0 mm

(beige body & straight boot) 6828129-X Duplex, 1.6–2.0 mm

1918153-X Simplex, 2.4 mm

Note: X = -1 for individual package, -2 for bulk package.

Instruction Sheet 408-10014. See http://www.tycoelectronics.com/documents.

Duplex Clip Available (Part Number 1754371-1).

Note: All part numbers are RoHS compliant.

52.0

[2.05] Ref.

Connector Sub Assembly

Crimp Eyelet /

Heat Shrink Assembly

Boot, Bend Limiting

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Note: All part numbers are RoHS compliant.

Short Boot LC Connector

Product Facts

■Overall LC connector length

42.5 mm (compares to

52 mm standard product)

■Multimode or singlemode

■Simplex or duplex

■Anti-snag rear connector

latch

■For 1.6 mm to 2.4 mm cable

■GR-326 Small Form-Factor

Performance Requirements The short boot LC connector

provides GR-326 level

performance while reducing

ferrule tip to boot length to

42.5 mm. The 20% reduc-

tion in length is ideal for

installing in cabinets or

other enclosed spaces,

protecting against potential

mechanical damage from

closed cabinet doors.

Fiber Type Kit Part Number Description

Singlemode (blue body & 1918407-X Simplex, 1.6-2.0 mm

straight blue boot) 1918406-X Duplex, 1.6-2.0 mm

Multimode (beige body & 1918405-X Simplex, 1.6-2.0 mm

straight beige boot) 1918404-X Duplex, 1.6-2.0 mm

Note: X = -1 for individual package, -2 for bulk package

The boot (1918403-X) is also sold separately, for use with any Tyco Electronics LC connector.

Protective Cover

Connector Subassembly

Crimp Eyelet /

Heat Shrink Assembly

Bend Limiting Boot

47.00

[1.850] Ref.

Ref.

42.50

[1.673]

31.95

[1.258]Ref.

Part Number 1457567-4 Adapter Ref.

Not Included in Kit

Ref.

27.45

[1.081]

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors (Continued)

Fiber Optic Products Catalog

Note: All part numbers are RoHS compliant.

Narrow Latch LC Connector

Product Facts

■One-piece housing

■Reduced thumb latch for

tight interconnections

■Mates with Krone universal

1.25 mm adapter

■Multimode or singlemode

■Duplex through use of clip

(Part Number 1754371-1)

■Anti-snag rear connector

latch

■Subassembly can be used

with 900 µm to 3.0 mm cable

■GR-326 Small Form Factor

Performance

Fiber Type Kit Part Number Description

Singlemode (Blue Body & 1918538-X Simplex, 1.6-2.0 mm

Straight Blue Boot)

Multimode (Beige Body & 1918539-X Simplex, 1.6-2.0 mm

Straight Beige Boot)

Note: X = -1 for individual package, -2 for bulk package

Connector Assembly

Crimp Eyelet /

Heat Shrink Assembly

Bend Limiting Boot

Protective Cover

52.00

[2.047] Ref.

The reduced thumb latch on

this connector provides

superior performance when

space is limited by main-

taining all of the other fea-

tures of the Tyco Electronics

LC connector.

Wide Latch Multimode

Wide Latch Singlemode(Not sold through

Tyco Electronics)

Narrow Latch Singlemode

KRONE Universal Adapter Narrow Latch Multimode

KRONE is a trademark of KRONE Optical

Systems, Inc.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Note: All part numbers are RoHS compliant.

LC/SC Flexible Boot

Product Facts

■Compatible with any

Tyco Electronics LC

Connector

■Compatible with

Tyco Electronics SC

Part Numbers 6588714-3

and 6588715-5

■Controls cable radius in

limited space environments

■For use with 1.6 to 2.4 mm

multimode or singlemode

cable

■Requires crimp eyelet with

heat shrink (Part Number

6374150-X or 6588189-1)

Base Part Number Beige Blue Black Red

1918003 -5 -2 -3 —

LC/SC 900 µm GR-326

Style Boot

Product Facts

■Compatible with any

Tyco Electronics LC

Connector

■Compatible with

Tyco Electronics SC parts

6588714-3 and 6588715-5

■Provides bend limiting

support

■For use with 900 µm

multimode or singlemode

fiber

Base Part Number Beige Blue Black Green

1828184 -4 -1 -2 -3

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

LC Adapters

Fiber Optic Products Catalog

LC Duplex Adapter for SC Cutout — Plastic

Alignment Description Housing Part Numbers

Sleeve Material Color

Beige 6457567-8

Flanged Black 2-6457567-1

Aqua 2-6457567-0

Metal Blue 1-6457567-3

Beige 6457567-7

Flangeless Black 1-6457567-9

Aqua 1-6457567-8

Beige 6457567-5

Black 1-6457567-7

Flanged Aqua 1-6457567-6

Blue 6457567-4

Ceramic Green 6457567-6

Beige 6457567-2

Black 1-6457567-5

Flangeless Aqua 1-6457567-4

Blue 6457567-1

Green 6457567-3

Recommended Panel Cutout

Max. Panel Thk. 1.70 [.067]

Recommended Panel Cutout

Panel Thk. 1.2/1.7 [.047/.067]

Recommended Panel Cutout

Panel Thk. 1.2/1.7 [.047/.067]

LC Adapter for SC Cutout — Metal

Alignment Description Housing Part Numbers

Sleeve Material Color

Flanged 1754683-1

Ceramic Flangeless Electroless 1754682-1

Flangeless w/ Nickel

EMI Shielding 1754727-1

LC Simplex Adapter — Plastic

Alignment Description Housing Part Numbers

Sleeve Material Color

Ceramic Simplex Beige 1457062-2

Adapter Blue 1457062-1

Recommended Panel Cutout

Panel Thk. 1.2/1.7 [.047/.067]

9.5–10.0

[.375–.393]

13.0–13.5

[.512–.531]

18.0

[.709]

Ø 2.5

[.098]

M2 x 0.4 or

2-56 UNC When Required

Recommended Panel Cutout

Max. Panel Thk. 1.7 [.067]

LC Quad Adapter — Plastic Flanged

Alignment Description Housing Part Numbers

Sleeve Material Color

Metal Flanged Beige 1695790-5

Ceramic Flanged Blue 1695790-4

Note: All part numbers are RoHS compliant.

LC Duplex Adapter for LC Cutout — Plastic

Alignment Description Housing Part Numbers

Sleeve Material Color

Duplex Sr-Jr Beige 1985150-4

Metal Blue 1985150-3

Duplex Sr-Sr Beige 1985149-4

Blue 1985149-3

Duplex Sr-Jr Beige 1985150-2

Ceramic Blue 1985150-1

Duplex Sr-Sr Beige 1985149-2

Blue 1985149-1

13.2–13.4

[.520–.527]

13.2–13.4

[.520–.527]

11.7–11.8

[.461–.465]

7.1–7.2

[.280–.283]

M2 x 0.4 or

2-56 UNC

When Required

9.5–10.0

[.375–.393]

18.0

[.709]

13.0–13.5

[.512–.531]

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

MU High Density Connectors

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Product Facts

■Singlemode and multimode

product range

■For digital network

applications PC end face

available on both singlemode

and multimode connectors

■For analog network

applications, APC end face

available on singlemode

connectors (8°)

■Connector design uses

1.25 mm ceramic ferrule

technology

■Polarized for precise

insertion

■Factory terminated cable

assemblies

■LSZH sheathed cable

available

■High optical performance

(low insertion, high return

loss)

■High density (up to 8 lines

per module)

Performance Characteristics

Insertion Loss — 0.1 dB Typical

Reflectance — -55 dB Typical

Operating Temperature —

-25°C to +75°C

Durability — 500 Cycles

Tyco Electronics’ MU high density fiber

optic interconnection system offers a

solution for high performance

telecommunications networking.

The system centers around the fully

standardized MU connector, which is

also sometimes known as the Mini SC.

The MU connector is at least half the

size of the standard SC connector.

It can offer twice the port density

but all the optical performance of

traditional fiber optic connectors.

Featuring a similar latching mechanism

to the SC connector, the MU is just as

easy to connect and disconnect.

The MU system includes a complete

range of multimode and singlemode

pre-terminated cable assemblies;

bulkhead adapters; backplane housings;

system card housings; connector kits; ter-

mination tooling and customer

polishing processes.

MU Standards Compliance

Product range —

MU cable assembly

Applicable standards —

IEC 60874-1

CECC 86 305 801 (MU-APC)

I-ETS 300 671

IEC 61300

Product range —

Z-PACK 2 mm HM Product

Applicable standards —

IEC 60917

IEC 61076-4-101

Key Applications

Front Panel I/O and High

Density Patch Panels for Optical

Transmission Equipment,

Optical Distribution Frames

and Optical Network Units.

■Full range of simplex,

duplex and 8 position

bulkhead adapters

■Color coded adapters for

ease of identification

■Tuneable versions available

to achieve lower insertion

losses

■“Push-pull” type latching

mechanism

■Fully compliant with

relevant IEC standards (IEC

60874-1, CECC 86 305 801)

■Exceeds ETSI performance

requirements (ETSI Grade P)

Back Panel I/O in Optical

Transmission and Switching

Equipment

■8 position Type L optical

modules available

■2.0 mm misalignment

pickup tolerance during

mating

■Zero force on backplane

when fully mated

■Zero tensile load on

daughter card when fully

mated

■Constant mating force

during 2.5 mm free float

■Fully compliant with IEC

60917 and IEC 61076-4-101

Description Part Number

FOKIT MU SM PC 0.9 125/1.0 1348982-1⽧

FOKIT MU SM PC 0.9 126/1.0 1348982-2⽧

FOKIT MU SM PC 125 µm, 2.0 mm 106875-1⽧

FOKIT MU SM PC 126 µm, 2.0 mm 106875-2⽧

Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS

compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

MU High Density Connectors (Continued)

Fiber Optic Products Catalog

MU Bulkhead Adapter

The MU bulkhead adapter is designed to

help save valuable panel space in high

density applications. The adapter enables

the interconnection of two MU connectors

and features a 1.25 mm ceramic alignment

sleeve to ensure precise fiber alignment

and low insertion loss, both during and after

the interconnection process.

The MU bulkhead adapter is available in PC

and APC versions for both digital and ana-

Description Part Number

PC finish

Simplex MU Adapter 233263-1⽧

Duplex MU Adapter 233263-3⽧

Duplex MU Adapter with SC cut-out 1348840-2

APC finish

Duplex MU Adapter with SC cut-out 1348840-1

Z-PACK 2 mm HM1Type L and M

Connector Housings

Z-PACK 2 mm HM connector housings

offer a solution to the demand for discrete

fiber lines, allowing single disconnects and

routing on the backplane.

The 8 position Type L connector housing is

fully optical and can accommodate up to 8

fiber lines. These connector housings are

available in female configurations and are

designed for use on the system card.

The hybrid Type M connector housing

combines optical and electrical contacts

in one housing, with 55 signal contact

positions and 4 fiber optic lines. It allows

easy migration from combined optical /

electrical to full optical backplane

Description Part Number

Type L

Male 106743-1⽧

Female 106744-1

1HM : Hard Metric

inter-connections. Female Type M

connector housings are suitable for use

on the system card while male Type M

connector housings are designed for

back panel application.

Tyco Electronics also designs and

manufactures a range of MT based fiber

optic backplane connectors, LIGHTRAY

MPX fiber optic backplane connectors.

For further information, see Cable

Assemblies & Backplane Interconnects

Section 2, pages 137-151.

log network applications. It is also

available in a choice of simplex, duplex and

8 position versions.

Product Facts

■Complies to IEC 60917 and

IEC 61076-4-101

■Constant mating force

during 2.5 mm free float

■Zero tensile load on system

card and backplane when

fully mated

■Low insertion / extraction

forces

■Scalable system allows

easy implementation of

future upgrades

■Low loss

■High return loss

■APC versions available

■Float in all directions

(including x and y)

■Misalignment pick up

tolerances 2.0 horizontal,

2.5 mm vertical, and

2 degrees angular

MU Backplanes

Description Part Number

2 Position

Backplane Housing (includes mounting bracket) 1391160-1⽧

Systemcard Housing 1391095-1

4 Position

Backplane Housing (includes mounting bracket) 1391161-1⽧

Systemcard Housing 1391094-1

Note: Future product extensions planned: 6 position and 8 position versions.

Please contact your local Sales Engineer for additional information.

Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Product Facts

■One-piece connector body:

■Fastest assembly

■Field installable

■Anaerobic adhesive

compatible

■Compliant with

■JIS C-5973

■Fibre Channel

■TIA FOCIS-3

■Pre-radiused ceramic

ferrules

■For 125 µm cladding

diameter

■Instruction Sheet 408-8674

http://www.tycoelectronics.

com/documents

■Color coded to comply with

568C

■Aqua for 50/125 laser

optimized

■Black for standard 50/125

■Beige for 62.5/125

■Blue for singlemode

Multimode SC Connector Kits

Description Housing Boot Used With Part Numbers

Color Color Individual Pack Bulk Pack Crimp Tool

900 µm Buffered, 1-5503948-1 — 503911-1

3.0 mm Jacketed

Beige Aqua 3.0 mm Jacketed 1-5503948-0 — 503911-1

2.0 mm Jacketed 5504931-5 — 492026-1

900 µm Buffer 5504932-5 — N/A

900 µm Buffered,

3.0 mm Jacketed 1-5503948-2 — 503911-1

Beige Black 3.0 mm Jacketed 1-5503948-3 5503948-8 503911-1

Simplex 2.0 mm Jacketed 5504931-6 5504931-3 492026-1

900 µm Buffer 5504932-1 5504932-2 N/A

900 µm Buffered,

3.0 mm Jacketed 5503948-5 — 503911-1

Beige Beige 3.0 mm Jacketed 5503948-1 5503948-2 503911-1

2.4 mm Jacketed 5504930-1 5504930-2 492026-1

2.0 mm Jacketed 5504931-1 — 492026-1

900 µm Buffer 5504932-6 — N/A

Beige Aqua 3.0 mm Jacketed 5504657-8 — 503911-1

2.0 mm Jacketed 5504928-3 — 492026-1

Beige Black 3.0 mm Jacketed 5504657-9 — 503911-1

Duplex 2.0 mm Jacketed 5504928-4 — 492026-1

3.0 mm Jacketed 5504657-1 5504657-2 503911-1

Beige Beige 2.4 mm Jacketed 5504927-1 5504927-2 492026-1

2.0 mm Jacketed 5504928-1 — 492026-1

Simplex Connector Duplex Connector

Performance Characteristics

for Singlemode SC Connector

Kits — Polymer Crimp Body

■Insertion Loss — <0.2 dB Typical

■Return Loss — <-55 dB Typical

■Durability — 200 Cycles

Performance Characteristics

for GR-326 Style Product

■Insertion Loss — <0.2 dB Typical

■Return Loss — <-59 dB Typical

■Durability — 200 Cycles

■Tested to GR-326 (Test Report

501-584)

■Tunable — 6 positions

Performance Characteristics

for Multimode SC Connector

Kits

■Insertion Loss — <0.2 dB Typical

■Durability — 500 Cycles

■TIA 586B Compliant

SC 1.6 mm to 2.0 mm Connector

GR-326 Style Singlemode SC Connector Kits — Metal Crimp Body

Description Housing Boot Used With Part Numbers

Color Color Individual Pack Bulk Pack Crimp Tool

3.0 mm Jacketed 4-1918861-5 — (1) 492131-1

(1) 58532-1

Simplex Blue Blue 2.4 mm Jacketed 6588714-5 6588714-6 1588176-1

2.0 mm Jacketed 6588714-1 6588714-4 1588176-1

Duplex Blue Blue 2.4 mm Jacketed 6693776-5 6693776-6 1588176-1

2.0 mm Jacketed 6693776-1 6693776-2 1588176-1

Note: All part numbers are RoHS

compliant.

Singlemode SC Connector Kits — Polymer Crimp Body

Description Housing Boot Used With Part Numbers

Color Color Individual Pack Bulk Pack Crimp Tool

900 µm Buffered, 5504646-7 — 503911-1

3.0 mm Jacketed

Simplex Blue Blue 3.0 mm Jacketed 5504646-1 5504646-2 503911-1

2.4 mm Jacketed 5504933-2 5504933-4 492026-1

2.0 mm Jacketed 5503934-2 5503934-3 492026-1

900 µm Buffer 5492123-1 5492123-2 N/A

Duplex Blue Blue 3.0 mm Jacketed 5504655-1 5504655-2 503911-1

2.0 mm Jacketed 5504936-2 — 492026-1

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

SC Connector Component Selection Chart (bulk packaged)

Simplex Connector Crimp Eyelet w/ Crimp Strain Relief

Fiber Type Sub-Assembly Duplex Clip* Cable Size Heat Shrink Eyelet Part Number**

6457215-5 (2) 6348522-1 3.0 mm — 504973-3 1588491-X

Singlemode - GR-326 Style 2.4 mm 6588189-1 — 1588153-X

6588714-3 (2) 6348522-1 1.6-2.0 mm 6374150-2 — 1588153-X

900 µm — — 1828184-X

3.0 mm — 503970-3 5503971-X

2.4 mm — 503970-6 5503971-X

Singlemode - Polymer Crimp Body 5492123-7 (2) 6348522-1 2.0 mm — 503970-9 5503971-X

900 µm — — 6457493-X (long)

6278309-X (short)

Multimode - Metal Crimp Body 2.4 mm 6588189-1 — 1588153-X

(Ceramic Ferrule) 6588715-5 (2) 6348522-1 1.6-2.0 mm 6374150-2 — 1588153-X

900 µm — — 1828184-X

3.0 mm — 503970-3 5503971-X

Multimode - Polymer Crimp Body 2.4 mm — 503970-6 5503971-X

(Ceramic Ferrule) 5503948-7 (2) 6348522-1 2.0 mm — 503970-9 5503971-X

900 µm — — 6457493-X (long)

6278309-X (short)

* For Fibre Channel compliant assemblies, use one (1) piece each of Part Number 503487-Y and 503488-Y. (Dash refers to color — refer to customer drawing for

details).

** Strain relief dash number indicates color - see page 55 for details.

SC Duplex Clip (Black)

Part Number 6348522-1

Use 2 pieces to duplex

simplex housings

SC Connector Components

3.0 mm Jacket

1.6 - 2.4 mm

Jacket

900 µm Buffered Fiber

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Part Number 5503141-1

Product Facts

■62.5/125 Multimode

■Use for Equipment Testing

■0.6 dB Insertion Loss

■0.5" Ferrule Centerline

Part Number 5503141-2

Product Facts

■50/125 Multimode

■Use for Equipment Testing

■0.8 dB Insertion Loss

■0.5" Ferrule Centerline

Part Number 5504883-1

Product Facts

■Singlemode

■Use for Equipment Testing

■1.5 dB Insertion Loss

■0.5" Ferrule Centerline

SC Low Loss Loopback Connector

SC Strain Reliefs — Jacketed Cable

Part Number

Description GR-326 Style Color

Black Red Beige Blue

3.0 mm No 1-5503971-0 1-5503971-1 5503971-1 5503971-2

2.4 mm No 1-5503971-2 1-5503971-3 5503971-3 5503971-4

2.0 mm No 2-5503971-3 2-5503971-7 5503971-5 5503971-6

3.0 mm Yes — — — 1588491-2

1.6 mm - 2.4 mm Yes 1588153-3 — 1588153-5 1588153-2

SC Strain Reliefs — 900 micron

Part Number

Description Color

Black Beige Blue

Long (33 mm) 900 µm 6457493-3 6457493-9 6457493-1

Short (10 mm) 900 µm 6278309-1 — 6278309-2

GR-326 Style 900 µm 1828184-2 1828184-4 1828184-1

SC Strain Reliefs — Angled

Part Number

Description Color

Black Beige Blue

3.0 mm Simplex 1278705-3 1278705-2 1278705-1

2.0 mm Simplex 1374737-3 1374737-2 1374737-1

2.0 mm 45° Simplex 6457543-4 6457543-1 6457543-2

3.0 mm - GR-326 Style

900 µm Short

3.0 mm Angled

900 µm

GR-326 Style 900 µm

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

Tight Jacketed SC

Connectors

Product Facts

■Multimode or singlemode

■Simplex or duplex

■Tested using MIL-PRF-

85045/16 2.0 mm cable

■SC Commercial Item

Description (CID) interim

approval by Naval Surface

Warfare Center, Dahlgren

Division

Application

■In Flight Networks

■Shipboard Applications

■Aero Market

Tight Jacketed SC Connector Kits

Fiber Type Kit Part Number Description

Singlemode 6828100-X Simplex, 1.6–2.0 mm

(blue body & straight boot) 1828573-X Duplex, 1.6–2.0 mm

1918227-X Simplex, 2.4 mm

Multimode 6828099-X Simplex, 1.6–2.0 mm

(beige body & straight boot) 1828574-X Duplex, 1.6–2.0 mm

1918154-X Simplex, 2.4 mm

Note: X = -1 for individual package, -2 for bulk package.

Instruction Sheet 408-10015. See http://www.tycoelectronics.com/documents.

Note: All part numbers are RoHS compliant.

The tight jacketed SC

Connectors are non pull-

proof versions of the stan-

dard connectors that are

designed for use with tight

construction cable. Unlike

standard connectors, this

design allows the jacket

and buffer to move together,

reducing the chances of

micro-bends and fiber

breakage.

56.9

[2.24]

Connector Sub Assembly

Crimp Eyelet /

Heat Shrink Assembly

Boot, Bend Limiting

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

SC Adapters

Product Facts

■Suitable for any SC

connector

■Available with metal or

ceramic alignment sleeves

■Choice of housing materials

and colors

■Color coded to comply with

568C

■Aqua for 50/125 laser

optimized

■Black for standard 50/125

■Beige for 62.5/125

■Blue for singlemode

■Duplex adapters accept

two simplex connectors or

one duplex connector

■Assortment of hybrid

configurations available

■Mounting screws available

Part Number 503663-1

■Slide-on cover available

■EMI gasketed parts available

SC Simplex Adapter - Plastic

SC Duplex Adapter - Plastic

SC Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278348-1

Ceramic Electroless Nickel 6278348-3

SC Duplex Adapter - Plastic

Alignment Sleeve Housing Part Numbers

Material/Application Color

Beige 5504640-1

Metal/MM only Black 5504640-4

Aqua 5504640-6

Beige 5502776-9

Metal Black 5502776-7

Aqua 2-5502776-5

Blue 5502776-8

Beige 1-5502776-2

Ceramic Black 1-5502776-0

Aqua 2-5502776-6

Blue 1-5502776-1

Ceramic/APC Green 2-5502776-3

Flangeless SC Simplex Adapter -

Plastic

SC Simplex Adapter - Metal

Flangeless SC Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278348-5

Ceramic Electroless Nickel 6278348-7

Flangeless SC Simplex Adapter -

Metal

SC Simplex Adapter - Plastic

Alignment Sleeve Housing Part Numbers

Material/Application Color

Beige 5504614-1

Metal/MM only Black 5504614-3

Aqua 5504614-4

Beige 5502632-9

Metal Black 5502632-7

Aqua 2-5502632-3

Blue 5502632-8

Beige 1-5502632-2

Ceramic Black 1-5502632-0

Aqua 2-5502632-4

Blue 1-5502632-1

Ceramic/APC Green 1828028-2

Flangeless SC Simplex Adapter - Plastic

Alignment Housing Part Numbers

Sleeve Material Color

Metal Black 5504632-1

Blue 5504632-3

Black 5504632-2

Ceramic Aqua 5504632-6

Blue 5504632-4

Green 5504632-5

Note: All part numbers are RoHS

compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

SC Duplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278049-1

Ceramic Electroless Nickel 6278049-3

SC to ST Simplex Adapter - Plastic

Alignment Housing Part Numbers

Sleeve Material Color

Beige 5502780-3

Metal Black 5502780-1

Aqua 2-5502780-0

Blue 5502780-2

Beige 5502780-6

Ceramic Black 5502780-4

Aqua 2-5502780-1

Blue 5502780-5

SC to ST Simplex Adapter -

Plastic

SC Duplex Metal Adapter

w/ EMI Shielding

SC Duplex Adapter

SC to ST Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278350-1

Ceramic Electroless Nickel 6278350-3

SC to ST Simplex Adapter - Metal

Shielded SC Duplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6374223-1

Ceramic Electroless Nickel 6374223-3

■Designed to help prevent

EMI leak

■Ideal for high-speed

applications

SC to ST Hybrid Adapters

SC Adapters (Continued)

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

SC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

SC to ST Hybrid Adapters

(Continued)

SC to ST Duplex Adapter - Plastic

Alignment Housing Part Numbers

Sleeve Material Color

Beige 5504663-4

Metal (MM Only) Black 5504663-6

Aqua 5504663-5

Beige 5503137-3

Metal Black 5503137-1

Aqua 2-5503137-1

Blue 5503137-2

Beige 5503137-6

Ceramic Black 5503137-4

Aqua 1-5503137-9

Blue 5503137-5

SC to ST Duplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278051-1

Ceramic Electroless Nickel 6278051-3

Flangeless SC to ST Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278350-5

Ceramic Electroless Nickel 6278350-7

Flangeless SC to ST Simplex

Adapter - Metal

The Tyco Electronics slide-

on retractable cover is used

for simplex or duplex SC

applications. These

retractable doors slip onto

the end of existing

Tyco Electronics adapters

and can be mounted after

the adapter has already

been installed.

1693539-1 —

Blue Simplex SC

1693539-2 —

Beige Simplex SC

1693539-3 —

Green Simplex SC

1693540-1 —

Blue Duplex SC

1693540-3 —

Green Duplex SC

Slide-on Retractable Cover

for SC Simplex or Duplex

Applications

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

ST Connectors — Epoxy Type

Fiber Optic Products Catalog

CeramicProduct Facts

■Epoxy type connector

■Pre-radiused ceramic

ferrule

■Available in bulk packages

■Crimp tool

Part Number 58433-4

Singlemode Ceramic

Performance Characteristics

Insertion Loss — 0.3 dB typical

Back Reflection — <-40 dB typical

Durability — 200 cycles

Materials

Ferrule Material — Ceramic

Body Material — Nickel Plated Brass

Coupling Nut Material —

Plated Die Cast

Singlemode ST Connector Kits — Ceramic Ferrule

Body Coupling Nut Boot Color Used With Individual Pack Bulk Pack IS Sheet

Part Number Part Number

Zinc Yellow 900 µm and 5503613-2 5503613-3 408-9645

(900 µm) 250 µm Fibers

Yellow 900 µm and

Nickel-plated Zinc (Bend-Limiting) 250 µm Fibers, 5502579-2 — 408-9645

Brass 3.0 mm Cable

Yellow 900 µm and

Zinc (Short) 250 µm Fibers, 5502580-2 5502580-4 408-9645

3.0 mm Cable

Multimode ST Connector Kits — Ceramic Ferrule

Body Coupling Nut Boot Color Used With Individual Pack Bulk Pack IS Sheet

Part Number Part Number

Black (Short) 3.0 mm Cable — 503569-2 408-9971

Black (Short) 900 µm Fiber, 503571-1 — 408-9971

3.0 mm Cable

Polymer Polymer 900 µm and

Black (Buffer)/ 250 µm Fibers, 5503571-3 — 408-9971

Black (Short) 2.4 mm &

3.0 mm Cable

Zinc Black (Short) 3.0 mm Cable 503677-2 503677-1 408-9971

Black (Short) 3.0 mm Cable — 5492458-2 408-9645

Black (Buffer)/ 900 µm and 5492458-1 — 408-9645

Black (Short) 3.0 mm Cable

Black (Buffer)/ 900 µm and

Black 250 µm Fibers, 5501380-1 — 408-9645

Nickel-plated (Bend Limiting) 2.4 mm &

Brass Zinc 3.0 mm Cable

Black (Short) 2.4 mm & 1-5501380-6 2-5501380-0 408-9645

3.0 mm Cable

900 µm and

Black 250 µm Fibers, 5502674-1 — 408-9645

(Right Angle) 2.4 mm &

3.0 mm Cable

Note: All part numbers are RoHS compliant.

Ceramic

Multimode Ceramic

Performance Characteristics

Insertion Loss — 0.3 dB typical

Durability — 500 cycles

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

ST Connectors — Epoxy Type (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Multimode ST Connector Kits — Polymer Ferrule

Body Coupling Nut Boot Color Used With Individual Pack Bulk Pack

Part Number Part Number

Black (Buffer)/ 900 µm and

Black (Short) 250 µm Fibers, 5503415-1 —

Polymer Polymer 3.0 mm Cable

Black (Short) 3.0 mm Cable — 503424-3

Multimode ST Connector Kits — Stainless Steel Ferrule

Body Ferrule Boot Color Used With Part Number

Designation

125 Black (Bend Limiting) 3.0 mm Cable 5504008-3

Black (Long) 4.3 mm Cable 5504008-4

Stainless Steel 140 Black (Bend Limiting) 3.0 mm Cable 5504008-7

231 Black (Bend Limiting) 3.0 mm Cable 1-5504008-4

240 Black (Bend Limiting) 3.0 mm Cable 1-5504008-3

280 Black (Short) 3.0 mm Cable 4-5504008-6

Multimode

Polymer Composite

Performance Characteristics

Insertion Loss — 0.3 dB Typical

Durability — 500 Cycles

Crimp Tool — Part Number 58433-4

Instruction Sheet — 408-9971

http://www.tycoelectronics.com/documents

Materials

Ferrule — Composite Polymer

Body — Polymer

Coupling Nut — Polymer

Polymer Composite

Stainless Steel

Multimode

Stainless Steel

Performance Characteristics

Insertion Loss — 0.3 dB Typical

Operating Temp. Range —

-30°C to +70°C

Durability — 500 cycles

Crimp Tool — Part Number 58551-1

Instruction Sheet — 408-4151

http://www.tycoelectronics.com/documents

Materials

Ferrule — Stainless Steel

Body — Nickel plated brass

Coupling Nut — Zinc

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

ST Connectors — Epoxy Type (Continued)

Fiber Optic Products Catalog

ST Connector Component Selection Chart (Bulk Packaged)

Fiber Type Connector Cable Crimp Strain Relief

Sub-Assembly Size Eyelet Tubing Part Number*

1.6-2.0 mm 501971-3 5501275-2 503219-X

Singlemode -

2.4 mm 501971-3 5501275-1 502128-X

Ceramic Ferrule 5502578-2 2.4 mm 501971-3 5501275-1 501457-X

Metal Body, Metal Nut 3.0 mm 501971-3 — 502128-X

3.0 mm 501971-3 — 501457-X

900 µm 501971-3 502179-7 5503628-X

1.6-2.0 mm 501971-3 5501275-2 503219-X

Multimode -

2.4 mm 501971-3 5501275-1 502128-X

Ceramic Ferrule 5492458-5 2.4 mm 501971-3 5501275-1 501457-X

Metal Body, Metal Nut 3.0 mm 501971-3 — 502128-X

3.0 mm 501971-3 — 501457-X

900 µm 501971-3 502179-7 5503628-X

1.6-2.0 mm 501971-3 5501275-2 503219-X

Multimode -

2.4 mm 501971-3 5501275-1 502128-X

Ceramic Ferrule 5501458-8 2.4 mm 501971-3 5501275-1 501457-X

Metal Body, Polymer Nut 3.0 mm 501971-3 — 502128-X

3.0 mm 501971-3 — 501457-X

900 µm 501971-3 502179-7 5503628-X

1.6-2.0 mm 501971-3 5501275-2 503219-X

Multimode -

2.4 mm 501971-3 5501275-1 502128-X

Ceramic Ferrule 503676-5 2.4 mm 501971-3 5501275-1 501457-X

Polymer Body, Metal Nut 3.0 mm 501971-3 — 502128-X

3.0 mm 501971-3 — 501457-X

900 µm 501971-3 502179-7 5503628-X

1.6-2.0 mm 501971-3 5501275-2 503219-X

Multimode -

2.4 mm 501971-3 5501275-1 502128-X

Ceramic Ferrule 503676-4 2.4 mm 501971-3 5501275-1 501457-X

Polymer Body, Polymer Nut 3.0 mm 501971-3 — 502128-X

3.0 mm 501971-3 — 501457-X

900 µm 501971-3 502179-7 5503628-X

* Strain relief dash number indicates color - see chart on page 63 for details.

Note: All part numbers are RoHS compliant.

Long Boot

Crimp Eyelet

Connector Assembly

Bare Buffer Boot

PVC Tubing

Right Angle Boot

Short Boot

Protective Cover

HYTREL Tubing

TYGON Tubing

58.00

[2.283]

78.00

[3.071]

47.00

[1.850]

56.00

[2.205]

TYGON is a trademark of Saint-Gobain

Performance Plastics Corporation.

HYTREL is a trademark of E.I. du Pont de

Nemours and Company.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

ST Connectors — Epoxy Type (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Product Facts

■Designed to accept

multimode TO-18, TO-46

and TO-52 active devices

■Nickel plated, die cast zinc

■Mount to PCB or through

panel

■Includes positioning ring

Description Packaging Height Part Number

Standard height Single .410 5501474-1

Low profile Single .280 5502585-2

Low profile Single (100) .314 5504022-2

Low profile Bulk (50) .314 5504022-3

Note: All part numbers are RoHS compliant.

ST Coupling Receptacles

Product Facts

■Free-hanging or panel

mount design

Alignment Sleeve Material Color Part Number

Metal/MM Only Beige 504662-2

Metal/MM Only Lt. Almond 504662-1

ST Polymer Duplex Receptacle

ST Active Device Mounts — Multimode

Alignment Sleeve Material Packaging Part Number

Polymer Composite Single 501381-1

Multimode Bulk (1000) 501381-2

Metal Single 504021-1

Multimode Bulk (50) 504021-2

Zirconia Ceramic Single 502750-1

Singlemode Bulk (50) 502750-2

Strain Relief Bulk packages (100 pcs./package)

Color Bend Limiting Short Right Angle Buffer Short Bend Limiting

(3.0 mm) (2.0 mm) (2.0 mm)

Black 502128-1 501457-1 5502667-1 5503628-1 503219-1 233454-4

Blue 502128-7 501457-5 5502667-2 — — 233454-2

Beige — 501457-4 — 1-5503628-9 503219-4 233454-6

Bend Limiting Short Right Angle Buffer Bend Limiting

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

FC Connectors

Fiber Optic Products Catalog

Product Facts

■One-piece connector body:

■Fastest assembly

■Compliant with:

■JIS C-5970

■Pre-radiused ferrule

Instruction Sheet — 408-8674

http://www.tycoelectronics.com/documents

Singlemode FC Connector Kits — Polymer Crimp Body

Boot Color Used With Individual Pack Bulk Pack Crimp Tool

Part Number Part Number

3.0 mm Jacketed 5504649-1 5504649-8 503911-1

Blue 2.4 mm Jacketed 5504914-2 — 492026-1

2.0 mm Jacketed 5504915-2 — 492026-1

900 µm Buffer — 5492052-5 N/A

Singlemode FC Connector

Kits - Polymer Crimp Body

Performance Characteristics

Insertion Loss — <0.2 dB Typical

Return Loss — <-59 dB Typical

Durability — 200 Cycles

GR-326 Style Singlemode FC Connector Kits — Metal Crimp Body

Boot Color Used With Individual Pack Bulk Pack Crimp Tool

Part Number Part Number

3.0 mm Jacketed 4-1918962-2 — (1) 492131-1

(1) 58532-1

Blue 2.4 mm Jacketed 6754264-5 6754264-6 1588176-1

2.0 mm Jacketed 6754264-4 6754264-7 1588176-1

900 µm Buffer 6754264-2 — 1588176-1

GR-326 Style FC Connector

Kits - Metal Crimp Body

Singlemode

Performance Characteristics

Insertion Loss — <0.2 dB Typical

Return Loss — <-59 dB Typical

Tested to GR-326

Tuning — 6 position

FC Strain Reliefs — Jacketed Cable

Part Number

Description GR-326 Style Color

Black Red Beige Blue

3.0 mm No 1-5503971-0 1-5503971-1 5503971-1 5503971-2

2.4 mm No 1-5503971-2 1-5503971-3 5503971-3 5503971-4

2.0 mm No 2-5503971-3 2-5503971-7 5503971-5 5503971-6

3.0 mm Yes — — — 1588491-2

1.6 mm - 2.4 mm Yes 1588153-3 — 1588153-5 1588153-2

FC Strain Reliefs — 900 micron

Part Number

Description Color

Black Beige Blue

Long (33 mm) 900 µm 6457493-3 6457493-9 6457493-1

Short (10 mm) 900 µm 6278309-1 — 6278309-2

GR-326 Style 900 µm 1828184-2 1828184-4 1828184-1

FC Strain Reliefs — Angled

Part Number

Description Color

Black Beige Blue

3.0 mm Simplex 1278705-3 1278705-2 1278705-1

2.0 mm Simplex 1374737-3 1374737-2 1374737-1

2.0 mm 45° Simplex 6457543-4 6457543-1 6457543-2

3.0 mm - GR-326 Style

3.0 mm Angled

900 µm

GR-326 Style 900 µm

900 µm Short

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

FC Connectors (Continued)

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

FC Square Flange Adapter

FC 8 mm/9 mm Dia. Round

FC 8 mm Dia. Round (Double D)

FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter - Metal

Alignment Panel Keyway Part Numbers

Sleeve Material Cut-out Slot (Nom.)

Metal D-Hole Std. 5504407-1

(Copper) 2.33 mm

Ceramic D-Hole Std. 5504407-3

2.33 mm

Ceramic/APC D-Hole 2.05 mm 5504407-8

Type R

Ceramic/APC D-Hole Prec. 5504407-7

2.02 mm

FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter - Metal

Alignment Panel Keyway Part Numbers

Sleeve Material Cut-out Slot (Nom.)

Metal Double Std. 5504013-1

D-Hole 2.33 mm

FC Simplex Square Flange Adapter - Metal

Alignment Panel Keyway Part Numbers

Sleeve Material Cut-out Slot (Nom.)

Metal Square Std. 5501506-2

Flange 2.33 mm

Ceramic Square Std. 5501506-1

Flange 2.33 mm

FC Connector Component Selection Chart (bulk packaged)

Simplex Connector Crimp Eyelet w/ Crimp Strain Relief

Fiber Type Sub-Assembly Cable Size Heat Shrink Eyelet Part Number*

6754264-8 1.6-2.0 mm 6374150-1 — 1588153-X

Singlemode - GR-326 Style 2.4 mm 6588189-1 — 1588153-X

6457216-5 3.0 mm — 504973-3 1588491-X

2.4 mm — 503970-6 5503971-X

Singlemode 5504649-9 3.0 mm — 503970-3 5503971-X

Polymer Crimp Body 6457493-X (long)

900 µm — — 6278309-X (short)

6374778-2 1.6-2.0 mm 6374150-1 — 1588153-X

2.4 mm 6588189-1 — 1588153-X

Multimode - Ceramic Ferrule 3.0 mm — 503970-3 5503971-2

5504922-3 6457493-9 (long)

900 µm — — 6278309-1 (short)

* Strain relief dash number indicates color - see page 64 for details.

FC Adapters

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

FC Connectors (Continued)

Fiber Optic Products Catalog

SC to FC Simplex Adapter - Plastic

Flangeless SC to FC Simplex

Adapter - Metal

SC to FC Simplex Adapter - Plastic

Alignment Housing Part Numbers

Sleeve Material Color

Metal Black 5502871-1

Ceramic Blue 5502871-4

Flangeless Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278349-5

Ceramic Electroless Nickel 6278349-7

SC to FC Duplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278050-1

Ceramic Electroless Nickel 6278050-3

FC to ST Simplex Adapter - Metal

Hybrid FC to ST Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 5503640-1

Ceramic Electroless Nickel 5503640-2

Hybrid Adapters - SC/FC/ST

Note: All part numbers are RoHS compliant.

SC to FC Simplex Adapter - Metal

Alignment Housing Part Numbers

Sleeve Material Color

Metal Electroless Nickel 6278349-1

Ceramic Electroless Nickel 6278349-3

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

FSD Connector Components — Multimode

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Performance Characteristics

Insertion Loss — 0.5 dB typical

Durability —

Ceramic Ferrules 500 cycles

Ceramic Instruction Sheet

408-9373

http://www.tycoelectronics.com/documents

FSD

Part Number

Diameter Cable Type Replacement

(µm) DUALAN Cable Light Duty DUALAN Cable Ferrules

Single Packed Bulk Packed Single Packed Bulk Packed

Ceramic Ferrules

125 5501780-1 5501780-3* 5502015-1 5502015-3* 5501779-1

Termination Kit: 503746-6

* Bulk packed, 200 per package.

Assembly Fixtures: with Polishing Tool: 501795-1; without Polishing Tool: 502023-1

Product Facts

■Meets specifications of

FDDI PMD - ANSI X3.166

■Ceramic ferrules available

■Designed in polarization

and user defined keying

Nut

Strain Relief

Inner Crimp Ring

Outer Crimp Ring

Plug Housing

Ferrule Assembly

Light Duty Dual

Inner Eyelets

Plug Housing

Dust Cover

Type M

Key

Type B

Key

Type A

Key

Field Keyable FSD

Receptacles and Adapters

Multimode Receptacles

Description Sleeve Material

Metal Ceramic

FSD to FSD 502806-2 502806-4

FSD to ST 502808-2 502808-4

Note: All part numbers are RoHS compliant.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

ESCON Connector Components

Fiber Optic Products Catalog

ESCON Connector Plug

Product Facts

■Multimode

■IBM Approved

■Simple field assembly

Performance Characteristics

Assembly Loss — 0.2 dB Typical

Durability — 200 cycles

Instruction Sheet

408-9808

http://www.tycoelectronics.com/documents

Description Part Number

125 µm Black

DUALAN Cable 5492181-1

DUALAN Cable 5492181-2*

* Bulk packed, 50 per package

Termination Kit: 503746-6.

ESCON Receptacles

Product Facts

■Multimode

Description Part Number

Black

ESCON to ESCON 502825-2

ESCON to ST 502826-2

ESCON Assembly Fixture Kit

Used to hold ferrules during

assembly, epoxy curing, and

polishing. Allows simultane-

ous polishing of both fer-

rules.

Description Part Number

Black

Without Polishing Bushing 492236-2

Polishing Bushing 492269-1

Note: All part numbers are RoHS compliant.

ESCON is a trademark of IBM

Corporation.

Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639

FSMA Products — Multimode

Fiber Optic Products Catalog

Connectors/Adapters/

Tooling & Accessories

Product Facts

■Industry compatible with

905 (FSMA-I) and 906

(FSMA-II) style connectors

■Terminates fiber sizes from

125 through 1000 microns in

diameter

■Design parameters conform

to NATO and IEC interface

standards

Performance Characteristics

Insertion Loss — 1.3 dB Typical

Temperature Range —

-55°C to +105°C

Durability — 200 cycles

Documentation

Product Specification

108-45106

Instruction Sheet

408-9863

FSMA 905 & 906

Test Report

501-359

http://www.tycoelectronics.com/documents

Adapter

Product Facts

■Precision mating adapter

for all FSMA connectors

■In-line splice or panel

mount design

Active Device Mount

Product Facts

■Designed to house TO-18,

TO-46, and TO-52 devices

■Constructed of nickel

plated die cast zinc alloy or

stainless steel

■Mounts to PC board or

through panel

Description Part Number

FSMA Adapters

Hex Flange, Stainless Steel 501049-1

Hex Flange, Stainless Steel, Counterbore, Sealed 501050-1

Fixed Flange, Nickel-Plated Brass 5504026-1

In-Line, Stainless Steel 504028-1

In-Line, Nickel-Plated Brass, Counterbore 5504030-1

In-Line, Stainless Steel, Counterbore, Short 504031-1

FSMA Connectors

Ferrule Connector Fiber Nominal Jacket O.D.

Material Body Material Diameter 3.1 mm 4.3 mm

(µm) 905 906 905

125 5504566-1 5504014-1 5504567-1

140 5504566-2 1-5504014-0 5504567-2

231 5504566-7 — —

Stainless Nickel-Plated 336 1-5504566-4 — —

Steel Brass 720 — — 3-5504567-9

1000 3-5504566-0 — —

1050 3-5504566-1 — 2-5504567-9

2050 — — 3-5504567-3

Description Part Number

FSMA Active Device Mounts

PC Mount Receptacle, Die Cast 5502136-1

PC Mount Receptacle, Die Cast, Bulk Packaged 5502136-2

PC Mount Receptacle, Stainless Steel 501055-1

Note: All part numbers are RoHS compliant.