Product Brief LantiqTM VINETICTM-xT Next Generation Voice Access Solution Main Features ** Fully compliant with all world-wide analog telephony standards (e.g. ITU-T Q.552, Telcordia GR-57-CORE, ...) ** Software programmable to worldwide analog characteristics (AC, DC, ringing) ** PCM interface G.711 A-law/-law or 16-bit linear ** Full wideband support ** Integrated and external ringing support ** On-hook transmission ** Caller-ID type I - III transmission support ** Integrated DTMF generator and receiver ** Teletax metering up to 5 VRMS ** Universal tone detector ** Howler tone generation (high amplitude) ** DC and AC Ring Trip detection ** Fast Ring Trip detection ** Ringing with DC offset ** Loop start signaling ** Ground start signaling ** Ground key indication ** Polarity reversal (hard/soft) ** Message waiting ** Integrated Test and Diagnostic Function, replacing MELT test heads ** Board production tests Interfaces ** SPI, PCM, GPIO The LantiqTM VINETICTM-xT family is the latest addition to Lantiqs mature and field-proven Voice product line. This family of pin- and software-compatible devices has been developed to address next-generation high-density Voice linecards, as well as small PBX and MDU designs. The VINETICTM-xT family is based on a 4-, 8- and 16-channel CODEC/SLICTM architecture. A slim digital SLICTM interface (3 pins for 2 channels) simplifies the circuit board layout while optimizing component density. Combining a VINETICTM-xT16 with Lantiq's two-channel Smart SLICTM can reduce the overall bill of materials by up to 40% and can shrink the line interface unit footprint by up to 30% when compared to current solutions on the market. The VINETICTM-xT family of products fully supports wideband voice (16 kHz sampling and wideband analog filters). It is 100% compatible with legacy POTS equipment and services, and offers advanced integrated line testing with test head (MLT) accuracy. The unique architecture of the VINETICTM-xT family enables customers to minimize their development time, reduce their bill of materials and create products that are seamlessly scalable and upgradable at minimal cost. Applications ** Access Networks, Central Office, DLC, DSLAMs, WLL ** FTTx (MxU/SxU), (IP)-PBX, Voice and IVD linecards Product Highlights ** ** ** ** ** ** ** ** ** ** 4/8/16 ch. Codec/SLICTM architecture offers highest density at low cost 3-pin digital SLICTM interface simplifies PCB design Full wideband support (16-bit/16 kHz) On-chip integrated line testing with test head accurancy (no external line test processor) 100% compatibility with legacy POTS equipment and services Integrated ringing (100 VRMS) Extended automatic modes to reduce processor load (caller-ID, pulse dialing, ringing, ground start etc.) Tone generators (2 per channel), DTMF sender and detection, caller-ID Robust design complying with severe EMC requirements (10 V conduct immunity) External, unbalanced ringing support Design-In & System Package ** Data sheets, hardware design guide (including reference schematics and LOM), users manual system description, users manual programmers reference ** 16 channels evaluation board including board support package ** WinEASY software for fast hardware bring-up ** High-level API software package (TAPI) ** Coefficient calculation tool (XTCOS) www.Lantiq.com Product Brief LantiqTM VINETICTM-xT Next Generation Voice Access Solution VINETICTM-xT Application Diagram ** One Voice/VoIP system concept for all access technologies (POTS, IVD) ** 4-, 8- and 16-channel CODEC/SLICTM architecture with slim digital SLICTM interfaces for optimized density (6-layer design, 96 channels) ** Full wideband support 1 SPI Smart SLICTM-R 1 to VINETICTM-xT16 Controller Smart SLICTM-R 8 16 17 Smart SLICTM-R 9 to VINETICTM-xT16 Smart SLICTM-R 16 32 33 Smart SLICTM-R 17 to VINETICTM-xT16 Smart SLICTM-R 24 48 49 PCM Smart SLICTM-R 25 to VINETICTM-xT16 Smart SLICTM-R 32 64 65 Smart SLICTM-R 33 to VINETICTM-xT16 Smart SLICTM-R 40 80 81 Smart SLICTM-R 41 to VINETICTM-xT16 PHY Fully flexible, scalable & upgradable Smart SLICTM-R 48 96 Product Summary Sales Code PEF 33016 PEF 33008 Product name VINETICTM-xT16 VINETICTM-xT8 VINETICTM-xT4 Product name PG-LQFP-100 Package Package Analog channels PCM interface A-law/-law/16-bit linear 16 8 yes/yes/yes yes Hook state machine yes Tone generation yes DTMF generator/detector yes Howler tone generation yes Message Waiting yes Supply voltages 1.5/3.3 V Metering 12/16 kHz Wideband support Integrated line testing How to reach us: http://www.Lantiq.com Published by Lantiq 85579 Neubiberg, Germany (c) 2011 Lantiq. All Rights Reserved. Sales Code 4 2 CID on/off-hook state machine Meets all relevant worldwide legacy POTS specifications PEF 33004 yes 5 VRMS yes CO-grade with test head accurancy PEF 42065 Smart SLICTM-R PEF 42065-2 Smart SLICTM-R2 PEF 42066 Smart SLICTM-P Smart SLICTM-P2 PEF 42064 Smart SLICTM-S PG-LQFP-64 pin-to-pin compatible DC feeding PEF 42066-2 pin-to-pin compatible 50 mA 50 mA 50 mA 50 mA Maximum battery supply +/- 85 V +/- 85 V -150 V -150 V -125 V Balanced ringing 85 VRMS 85 VRMS 85 VRMS 85 VRMS 70 VRMS internal/external internal/external internal/external internal/external internal yes yes yes yes no 53 dB 60 dB 53 dB 60 dB 53 dB Unbalanced ringing External ringing support Longitudinal balance On-hook transmission 50 mA yes yes yes yes yes Battery rails (negativ/positive) 2(+1ext)/1 2(+1ext)/1 3(+1ext)/0 3(+1ext)/0 2+1on-hook/0 Supply voltages 1.5/ 3.3 V 1.5/ 3.3 V 1.5/ 3.3 V 1.5/ 3.3 V 1.5/ 3.3 V Make & break dial-tone test yes yes yes yes no Stand-by low power mode yes yes yes yes yes Wideband support yes yes yes yes yes DSL friendly yes yes yes yes yes Integrated line testing yes yes yes yes yes Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Lantiq hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Lantiq Office (www.Lantiq.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Lantiq Office. Lantiq components may be used in life-support devices or systems only with the express written approval of Lantiq, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Order Number: PB-e-0047-v2