DC/DC CONVERTERS E Class Non-isolated 1
2 YEAR WARRANTY
SIL10E Series
3.0-5.5Vin single output
NEW Product
All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability Fixed output versions ±10%
(See Note 1) 5Vin with wide trim 0.8V to 3.63V
3.3Vin with wide trim 0.8V to 2.75V
Setpoint accuracy ±0.4%
Line regulation ±0.2%
Load regulation ±1.0%
Minimum load 0A
Overshoot/undershoot None
Ripple and noise 50mV pk-pk
0 to 20MHz BW 25mV rms max.
Temperature co-efficient ±0.01%/ºC
Transient response 50mV max. deviation
50µs recovery to
within ±1.0%
Remote sense 10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range 3.0 to 5.5VDC
Input current No load 70mA
Input current (max.) 8A max. @ Io max.
and Vout = 3.3V
Input current ripple 65mA rms
Remote ON/OFF (See Note 2)
Start-up time 20ms
File Name: sil10e_05.pdf Rev (02): 21 Jul 2004
•10A Current rating
•Input voltage range: 3.0V - 5.5V
•Output voltage range: 0.8V - 3.63V
•Ultra high efficiency: 96% @ 5Vin and 3.3Vout
•Extremely low internal power dissipation
•Minimal thermal design concerns
•Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
•Ideal solution where board space is at a premium
or tighter card pitch is required
•Industry standard footprint and pin out
The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from either a 5V or a 3.3V source.
The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry
leading 10A which allows maximum design flexibility and a pathway for future upgrades.
The SIL10E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface mount
technology and automated manufacturing techniques, the SIL10E offers compact size and
efficiencies of up to 96%.
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency See table
Insulation voltage Non-isolated
Switching frequency Fixed 300kHz typ.
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm
(vertical version) 2.0 x 0.31 x 0.5 inches
Pin length (Vertical) 0.135 ±0.02 in (3.43 ±0.5mm)
Weight 5g (0.18oz)
MTBF Telcordia SR-332 7,042,000 hours
MIL-HDBK-217F 680,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +100ºC
(See Note 3) temperature
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit Continuous
Thermal Automatic recovery
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B03 10 38572 037
CB Report and Certificate to IEC60950, Certificate No.
DE3-51686M1
Output Voltage Adjustment of the SIL10-05Wxxx Series
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL10E Series
3.0-5.5Vin single output
DC/DC CONVERTERS E Class Non-isolated2
NEW Product
File Name: sil10e_05.pdf Rev (02): 21 Jul 2004
SIL10E-05S3V3-V
Part Number System with Options
Product Family
SIL = Single In Line
Rated Output Current
10 = 10Amps
Mounting Option
V = Vertical Mount
H= Horizontal Mount
Number of Outputs
S = Single
W = Wide
Input Voltage
05 = 3.0V - 5.5V
12 = 10V - 14V
Output Voltage
2.5V, 3.3V etc
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8V to 3.63V. When the SIL10E-05W3V3 converter
leaves the factory the output has been adjusted to the default voltage of 3.3V
•When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V
• When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V
Output Voltage Adjustment of the SIL10E-05W3V3 Series
OUTPUT
INPUT OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE
CURRENT CURRENT
(TYP.) LINE LOAD NUMBER
(MAX.) (MIN.) (MAX.)
8.8W 3.0V - 5.5V 0.8V 0A 10A 83% ±0.2% ±1.5% SIL10E-05S0V8-V
11W 3.0V - 5.5V 1.0V 0A 10A 86% ±0.2% ±1.5% SIL10E-05S1V0-V
13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±0.2% ±1.0% SIL10E-05S1V2-V(4)
16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±0.2% ±1.0% SIL10E-05S1V5-V
19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±0.2% ±1.0% SIL10E-05S1V8-V
22W 3.0V - 5.5V 2.0V 0A 10A 93% ±0.2% ±1.0% SIL10E-05S2V0-V
27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±0.2% ±1.0% SIL10E-05S2V5-V(4)
36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±0.2% ±1.0% SIL10E-05S3V3-V
36.3W 4.5V - 5.5V 0.8V - 3.63V 0A 10A 95% ±0.2% ±1.0% SIL10E-05W3V3-V
Performance
E= Enhanced Performace
Notes
1When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V. When Vin
< 4.5V, then Vout can be adjusted from 0.8V to 2.75V.
2The SIL10E features a ‘Negative Logic’ Remote ON/OFF operation. If you
are not using the Remote ON/OFF pin, leave the pin open (the converter
will be on). The Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SIL10E:
Configuration Converter Operation
Remote pin open circuit Unit is ON
Remote pin pulled low Unit is ON
Remote pin pulled high [Von/off >1.2V] Unit is OFF
A ‘Positive Logic’ Remote ON/OFF version is also possible with this
converter. To order please place the suffix ‘-R’ at the end of the model
number e.g. SIL10E-05S3V3-VR
Notes
3Full de-rating curves available in both the Long Form Data Sheet and
Application Note 136.
4For certain applications that use low ESR capacitors on the output of the
convertor and to insure maximum converter stability, please add the
suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL10E Series
3.0-5.5Vin single output
DC/DC CONVERTERS E Class Non-isolated 3
NEW Product
0.170 (4.32)
0.316 ±0.008
(8.03 ±0.20)
PCB
SIDE VIEW
0.100 (2.54)
1.900 (48.26) 0.050 (1.27)
0.500 (12.70)
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
0.025 ± 0.001
(0.64 ±0.02)
PIN VIEW
2.000 ±0.020
(50.80 ±0.50)
J1
J2
15362 15432
Figure 1: Mechanical Drawing - Horizontal Mount Version
Figure 2: Mechanical Drawing - Vertical Mount Version
Data Sheet © Artesyn Technologies
®
2004
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com
File Name: sil10e_05.pdf Rev (02): 21 Jul 2004
J1 PIN CONNECTIONS
PIN NUMBER FUNCTION
1+Vout
2+Vout
3Remote Sense (+)
4+Vout
5Ground
J2 PIN CONNECTIONS
PIN NUMBER FUNCTION
1Ground
2+Vin
3+Vin
4No Pin
5Trim
6Remote ON/OFF
1.900 (48.26)
0.050 (1.27)
0.100 (2.54)
2.000 ±0.020
(50.80 ±0.50)
FRONT VIEW
PCB
0.168 (4.26)
SIDE VIEW
0.307 ±0.008
(7.80 ±0.20)
J1 J2
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
0.025 ± 0.001
(0.64 ±0.02)
0.500 (12.70)
0.635 (16.13)
0.135 (3.43)
15432 15632
