7E.13.8.230.0000 - FINDER - Product.Network

7E.13.8.230.0000 7E.16.8.230.0000

Features

kWh Energy meter - 1-phase

Type 7E.13 5(32)A - 1 module wide

Type 7E.16 10(65)A - 2 module wide

•Complies with EN 62053-21 and prEN 50470

•Complies with the EU MID-directive 2004/22/EG

(Measuring Instruments Directive), mandatory

for meters subject to legal regulation

(from 31 Oct 2006)

•Certified by PTB

(Physikalisch - Technischen Bundesanstalt)

•Accuracy class 1

•Protection class II

•Pulse output for remote energy management;

SO interface (open collector) according

DIN 43864 to link the energy meter to a

centrally located monitoring/management system

•Tamper-proof cover with lead seal facility

available as an accessory

•Space saving small size

•35 mm rail (EN 50022) mount

5/32 10/65

0.02 0.04

0.25...32 0.5...65

960 (10 ms) 1,950 (10 ms)

230 230

(0.8...1.15)UN(0.8...1.15)UN

50 50

< 0.4 < 0.5

Seven digit counter, red decimal digit, digit height 4 mm

999,999.9/0.1 999,999.9/0.1

2,000 1,000

5...30 5...30

20 20

10 10

1,000 1,000

50 50

100 100

1,000 1,000

–10…+45 –10…+45

–20…+55 –20…+55

II II

IP 50/IP 20 IP 50/IP 20

•Nominal current 5 A (32 A Maximum)

•1-phase 230 V AC

•17.5 mm wide

•Nominal current 10 A (65 A Maximum)

•1-phase 230 V AC

•35 mm wide

7E Series - Energy meter

-SO +SO

+24 V

-SO +SO

+24 V

PTB

Specification

Nominal/Maximum current measuring A

Minimum measured current A

Current range (within accuracy class) A

Maximum peak current A

Supply (& monitored) voltage V AC

Operating range

Frequency Hz

Rated power W

Display, Reading, Indication

Max. totalising count/Min. totalising count kWh

LED- Pulses per kWh

Open collector- output specification (SO+/SO–)

Voltage (external supply) V DC

Maximum current mA

Maximum leakage current @30 V/25 °C µA

Pulses per kWh

Pulse length ms

Internal series resistance Ω

Maximum Cable length (30 V/20 mA) m

Technical data

Accuracy class

Ambient temperature (Within accuracy class) °C

Ambient temperature (Outside accuracy class) °C

Protective class

Protection category: Housing/terminal

Approvals (according to type)

For outline drawing see page 5

10/65 10/65

0.04 0.04

0.5...65 0.5...65

1,950 (10 ms) 1,950 (10 ms)

3 x 230 3 x 230

(0.8...1.15)UN(0.8...1.15)UN

50 50

< 1.5 < 1.5

Seven digit counter, red decimal digit, digit height 4 mm

999,999.9/0.1 999,999.9/0.1

100 100

5...30 5...30

20 20

10 10

1,000 1,000

50 50

100 100

1,000 1,000

–25…+55 –25…+55

II II

IP 50/IP 20 IP 50/IP 20

7E.36.8.400.0000 7E.36.8.400.0002

7E Series - Energy meter

Features

kWh Energy meter - 3-phase

Type 7E.36-0000 10(65)A - Single tariff

Type 7E.36-0002 10(65)A - Dual tariff

•Complies with EN 62053-21 and prEN 50470

•Complies with the EU MID-directive 2004/22/EG

(Measuring Instruments Directive), mandatory

for meters subject to legal regulation

(from 31 Oct 2006)

•Certified by PTB

(Physikalisch - Technischen Bundesanstalt)

•Accuracy class B

•Protection class II

•Pulse output for remote energy management;

SO interface (open collector) according

DIN 43864 to link the energy meter to a

centrally located monitoring/management system

•Tamper-proof cover with lead seal facility

available as an accessory

•35 mm rail (EN 50022) mount

•Nominal current 10 A (65 A Maximum)

•3-phase

•70 mm wide

•Nominal current 10 A (65 A Maximum)

•3-phase

•Dual tariff (Day and Night)

•70 mm wide

(PEN)

+SO -SO

+24 V

3 x 230 V AC / 50 Hz

1L 1L 2L 2L 3L 3L

(PEN)

RT1,T2

NE1E2

+SO -SO

+24 V

3 x 230 V AC / 50 Hz

1L 1L 2L 2L 3L 3L

PTB

Specification

Nominal/Maximum current measuring A

Minimum measured current A

Current range (within accuracy class) A

Maximum peak current A

Supply (& monitored) voltage V AC

Operating range

Frequency Hz

Rated power per phase W

Display, Reading, Indication

Max. totalising count/Min. totalising count kWh

LED- Pulses per kWh

Open collector- output specification (SO+/SO–)

Voltage (external supply) V DC

Maximum current mA

Maximum leakage current @30 V/25 °C µA

Pulses per kWh

Pulse length ms

Internal series resistance Ω

Maximum Cable length (30 V/20 mA) m

Technical data

Accuracy class

Ambient temperature °C

Protective class

Protection category: Housing/terminal

Approvals (according to type)

RT1,T2 = Tariff switching equipment

For outline drawing see page 5

Insulation EN 62053-21 7E.13, 7E.16 7E.36

Insulation rated voltage V 250 250

Overvoltage category IV IV

Isolation between active part SO+/SO– terminals kV (1.2/50 µs) 6 6

adjacent phases kV (1.2/50 µs) — 6

Insulation between supply and SO+/SO– V AC 4,000 4,000

between adjacent phases V AC — 4,000

Protection class II II

EMC Specification Reference standard

Electrostatic discharge contact discharge EN 61000-4-2 8 kV

air discharge EN 61000-4-2 15 kV

Radio-Frequency Electromagnetic Field (80...1,000)MHz EN 61000-4-3 10 V/m

Fast Transients (Burst) (5-50 ns, 5 kHz) on Supply Terminals EN 61000-4-4 Class 4 (4 kV)

on SO+/SO– Terminals EN 61000-4-4 Class 4 (2 kV)

Surge (1.2/50 µs) on Supply Terminals EN 61000-4-5 Class 4 (4 kV)

on SO+/SO– Terminals EN 61000-4-5 Class 3 (1 kV)

Radio-Frequency Common Mode (0.15...80)MHz on Supply terminals EN 61000-4-6 10 V

Radiated and Conducted Emission EN 55022 Class B

Other data

Pollution degree 2

Vibration resistance (10...60)Hz mm 0.075

(60...150)Hz g 1

Vibration resistance of the internal mechanical counter (10...500)Hz g 2

Schock resistance g/18 ms 30

Schock resistance of the internal mechanical counter g/18 ms 350

Power lost to the environment 7E.13 7E.16 7E.36

without current W 0.4 0.4 1.5

with maximum current W 1 2 6

Supply terminals 7E.13 7E.16, 7E.36

Max. wire size solid cable

stranded cable

solid cable

stranded cable

mm2 1...6 0.75...4 1.5...16 1.5...16

AWG 18...10 18...12 16...6 16...6

Screw torque for Imax Nm 0.8...1.2 1.5...2

Screw M4 Pozidrive No.1, Phillips No.1, Flat No.1

SO+/SO– terminals Max. wire size solid cable

stranded cable

solid cable

stranded cable

mm2 2.5 1.5 2.5 1.5

AWG 14 16 14 16

Screw torque for Imax Nm 0.5 0.8

Screw M3 Pozidrive No.1, M4 Pozidrive No.1,

Phillips No.1, Flat No.1 Phillips No.1, Flat No.1

7E Series - Energy meter

Example: Energy meter 32 A/230 V AC, with PTB certified, accuracy class 1, available with Tamper-proof lead sealed cover as accessory,

for 35 mm rail (EN 50022) mounting.

Series

Function

1 = 1-phase

3 = 3-phase

Current

3 = 32 A

6 = 65 A

Supply version

8 = AC 50 Hz

Option

0 = Standard

2 = Dual tariff (7E.36 only)

Supply voltage

230 = 230 V AC 50 Hz

400 = 3 x 230/400 V AC 50 Hz

All versions/width

7E.13.8.230.0000/17.8 mm

7E.16.8.230.0000/35 mm

7E.36.8.400.0000/70 mm

7E.36.8.400.0002/70 mm

1 3 0 08 0 0

Ordering information

... .

2307E

Technical data

Phase L1↑L1↓inverted or loss Phase L2↑ L2↓inverted or loss Phase L3↑ L3↓ inverted or loss

LED indication (Normal operation)

7E Series - Energy meter

LED indication (Abnormal operation)

Status indicates errors of installation, as below

Type

7E.13

7E.16

7E.36

Device ON, incorrect connection (L-N inverted). Mark = 600 ms, Space = 600 ms

SO+/SO– Open collector output wiring diagram

The pulsating open collector output available at terminals SO+ and SO– can be interfaced with the input of a computer, plc or other

energy management equipment to allow the remote monitoring of energy consumed.

®®®®®

3 s 3 s 3 s 3 s 3 s ®®®®®

®®®®®

3 s 3 s 3 s 3 s 3 s ®®®®®

®®®®®

3 s 3 s 3 s 3 s 3 s

®®®®®

3 s 3 s 3 s 3 s 3 s

Phase L1↑L1↓and L2↑L2↓inverted or loss Phase L1↑ L1↓and L3↑ L3↓inverted or loss Phase L1↑ L1↓ and L2↑L2↓ and L3↑L3↓

inverted or loss

®®®®®

3 s 3 s 3 s 3 s 3 s ®®®®®

®®®®®

3 s 3 s 3 s 3 s 3 s

Mark = 100 ms,

–24 V DC

Energy meters – at difference locations

(Note: Both Single and Dual tariff meters

provide only a single pulsating output)

Central monitoring/management system

(max. 20 mA for each input)

Type

7E.13

7E.16

7E.36

Energy consumption

None Low High

Pulses Pulse

per kWh space

2,000 100 ms

1,000 100 ms

100 150 ms

The LED Pulse rate represents

the instantaneous power being

consumed, according to the following

kW = (number of pulse per Minute) / 33.3

kW = (number of pulse per Minute) / 16.7

kW = (number of pulse per Minute) / 1.7

7E Series - Energy meter

07E.13

Terminal cover for type 7E.13 07E.13

For the tamper-proof lead seal use 2 terminal cover

Accessories

07E.16

Terminal cover for type 7E.16 and 7E.36 07E.16

7E.16 - For the tamper-proof lead seal use 2 terminal covers

7E.36 - For the tamper-proof lead seal use 4 terminal covers

Outline drawing

17.5

35.6

89.2

62.1

23.8

7E.13.8.230.0000 7E.16.8.230.0000