VS-709-ECE-SAAN-P2/P4 - Vectron

1 of 9

VS-709

Dual Frequency VCSO

The VS-709 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency from one of the two internal SAW  lters. The

SAW  lters are high-Q Quartz devices that enable the circuit to achieve low phase jitter performance over a wide operating temperature

range. A divider circuit is deployed for output frequencies less than 600 MHz. The selectable dual oscillator is housed in a hermetically

sealed leadless surface mount package and o ered on tape and reel. It has a tri-state Frequency Select function that provides one of three

conditions: Frequency 1, Output Disable, or Frequency 2.

• Industry Standard Package, 5.0 x 7.0 x 1.8 mm

• 5th Generation ASIC Technology for Ultra Low Jitter

120 fs-rms (fN = 622.08 MHz, 12 kHz to 20 MHz)

105 fs-rms (fN = 622.08 MHz, 50 kHz to 80 MHz)

• Output Frequencies from 150 MHz to 1000 MHz

• Spurious Suppression, 90 dBc Typical

• 2.5V or 3.3V Supply Voltage

• LVPECL or LVDS Output Con gurations

• Tri-State Frequency Select (F1, OD, F2)

• Compliant to EC RoHS6 Directive

• PLL circuits for Clock Smoothing and Frequency Translation

Features Applications

Block Diagram

Description

VS-709

Vcc COutput Output

Vc Gnd

Figure 1. Functional block diagram

LVPECL

LVDS

X = 1,2,4

Description

• SONET / SDH

• OTN (Optical Transport Network)

• 10 GbE (Gigabit Ethernet)

• 10 GFC (Gigabit Fibre Channel)

• 40 GbE & 100 GbE

• Synchronous Ethernet

• WiMax

Standard

• GR-253-CORE

• ITU-T G.709/Y.1331

• IEEE 802.3ae

• INCITS 364-2003

• IEEE 802.3ba

• ITU-T G.8261

• IEEE 802.16

SAW 2

SAW 1

Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Performance Speci cations

Electrical Performance

Parameter Symbol Min Typical Maximum Units Notes

Frequency

Nominal Frequency fN150 1000 MHz 1,2,3

Absolute Pull Range APR ±50 ppm 1,2,3,9

Linearity Lin ±7 % 2,4,9

Gain Transfer KV+445 ppm/V 2,9

Temperature Stability fSTAB ±100 ppm 1,6

Supply

Voltage (± 10%) VCC 2.97 3.3 3.63 V 2,3

Current (Typical 50  Load) IEE 73 mA 3

Current (No Load) ICC 60 75 mA 3

Outputs

Mid Level VCC-1.5 VCC-1.3 VCC-1.1 mV 2,3

Single Ended Swing 750 mV-pp 2,3

Di erential Swing 1.5 V-pp 2,3

Current IOUT 20 mA 7

Rise Time tR180 250 ps-pp 6,7

Fall Time tF180 250 ps-pp 6,7

Symmetry SYM 45 50 55 % 2,3

Spurious Suppression (Non-Harmonic) 85 90 dBc 7

Jitter (600 ≤ fN ≤ 1000) ΦJ 150 fs-rms 7,8

Jitter (300 ≤ fN ≤ 500) ΦJ 190 fs-rms 7,8

Jitter (150 ≤ fN ≤ 250) ΦJ 280 fs-rms 7,8

Control Voltage

Control Voltage VC0.3 3.0 V 3

Input Impedance (F1 or F2 Enabled) ZC123 k 7

Input Impedance (Outputs Disabled) ZC472 k 7

Modulation Bandwidth BW 200 kHz 7

Operating Temperature TOP -40 +85 °C 1,3

Package Size 5.0 x 7.0 x 1.8 mm

Notes:

See Standard Frequencies and Ordering Information (Pg 8).

Parameters are tested with production test circuit (Pg 3).

Parameters are tested at ambient temperature with test limits guard-banded for speci ed operating temperature.

Measured as the maximum deviation from the best straight-line  t, per MIL-0-55310.

The Vc Model is described below (Fig 1).

Parameters are described with waveform diagram below (Fig 2).

Not tested in production, guaranteed by design, veri ed at quali cation.

For Frequencies > 600 MHz, Jitter is integrated across 50 kHz to 80 MHz.

For Frequencies < 600 MHz, Jitter is integrated across 12 kHz to 20 MHz. (Both per GR-253-CORE Issue3)

Tested with Vc = 0.3V to 3.0V.

2 of 9

3pF 1.65V

123k

Figure 1. Vc Model - F1 or -F2 Enabled Figure 2. 10K LV-PECL Waveform

Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Absolute Maximum Ratings

Parameter Symbol Ratings Unit

Power Supply VCC 0 to 6 V

Input Current IIN 100 mA

Output Current IOUT 25 mA

Voltage Control Range VC0 to VCC V

Frequency Select FS 0 to VCC V

Storage Temperature TSTR -55 to 125 C

Soldering Temperature/Duration TPEAK/tP260 / 40 C/sec

Test Circuits & Output Load Con gurations

3 of 9

Stresses in excess of the absolute maximum ratings can permanently damage the device. Also, exposure to these absolute maximum

ratings for extended periods may adversely a ect device reliability. Functional operation is not implied at these or any other conditions in

excess of those represented in the operational sections of this datasheet. Permanent damage is also possible if any device input (Vc or FS)

draws >100 mA.

Functional Test: Allows use of standard power supply biasing

con guration. Pull down resistors are used for LV-PECL outputs

and are removed for with LVDS outputs. Since the LVDS outputs

are AC coupled, the output DC levels cannot be measured.

Production Test: DC levels shown for Vee, FS,

& Vc are for devices con gured for 3.3V operation.

LV-PECL outputs are DC coupled to 50 test

equipment. LVDS outputs are connected to a digital volt meter,

then AC coupled to the test equipment. The digitial volt meter

allows for Mid Level & Swing measurements.

LV-PECL to LV-PECL: For short transmission lengths,

the pulldown resistor values shown provide reasonable

powerconsumption and waveform performance.

LVDS to LVDS: The 100 resistor should be removed if this load

isprovided internally within the LVDS receiver.

Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Typical Characteristics: Vc Pull, Vc Pull Linearity, & Vc Pull Slope

4 of 9 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Typical Characteristics: Phase Noise & Jitter

F1 F2 F1 F2 F1 F2 F1 F2

PN / Jitter 622.08 669.33 644.53 698.81 657.42 707.35 718.86 909.71 Units

L (f) @ 10 -32.9 -33.6 -36.1 -34.6 -33.1 -32.2 -31.9 -31.6 dBc/Hz

L (f) @ 100 -62.6 -62.6 -64.6 -63.6 -62.0 -61.4 -62.0 -60.2 dBc/Hz

L (f) @ 1K -88.4 -88.1 -90.2 -89.2 -88.4 -87.6 -87.0 -84.7 dBc/Hz

L (f) @ 10K -111.1 -110.7 -112.1 -111.2 -111.0 -110.0 -109.0 -106.3 dBc/Hz

L (f) @ 100K -132.2 -131.8 -132.6 -131.7 -132.0 -131.0 -129.6 -126.8 dBc/Hz

L (f) @ 1M -148.8 -147.6 -149.0 -147.4 -148.5 -147.0 -148.0 -144.6 dBc/Hz

L (f) @ 10M -149.9 -148.3 -150.2 -147.9 -149.7 -147.2 -149.3 -144.0 dBc/Hz

L (f) @ 100M -149.9 -148.4 -150.5 -147.6 -149.8 -147.4 -148.8 -144.2 dBc/Hz

12K - 20M 111.2 112.7 98.0 104.2 107.9 115.7 120.3 138.3 fs-rms

50K - 80M 110.7 121.1 100.9 119.6 106.5 120.0 108.1 147.6 fs-rms

5 of 9 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Environmental Compliance

Parameter Conditions

Mechanical Shock MIL-STD-883, Method 2002 B

Mechanical Vibration MIL-STD-883, Method 2007 A

Solderability MIL-STD-883, Method 2003

Gross and Fine Leak MIL-STD-883, Method 1014

Resistance to Solvents MIL-STD-883, Method 2016

Moisture Sensitivity Level IPC/JEDEC J-STD-020, MSL1

Handling Precautions

Although ESD protection circuitry has been designed into the VS-709 proper precautions should be taken when handling and mounting.

VI employs a human body model (HBM) and a charged-device model (CDM) for ESD susceptibility testing and design protection

evaluation.

ESD Ratings

Model Minimum Conditions

Human Body Model 2000 V MIL-STD 883, Method 3015

Charged Device Model 1000 V JEDEC, JESD22-C101

Machine Model 200 V JEDEC, JESD22-A115-A

Re ow Pro le (IPC/JEDEC J-STD-020)

Parameter Symbol Value

PreHeat Time t S60 s min., 180 s max.

Ramp Up R UP 3°C / s max.

Time Above 217°C t L60 s min., 150 s max.

Time To Peak Temperature t AMB-P 480 s max.

Time At 260°C t P20 s min., 40 s max.

Ramp Down R DN 6°C / s max.

6 of 9

VI quali cation includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR re ow simulation. The

VS-709 family is capable of meeting the following quali cation tests:

The VS-709 is quali ed to meet the JEDEC standard for Pb-Free

assembly. The temperatures and time intervals listed are based

on the Pb-Free small body requirements. The temperatures refer

to the topside of the package, measured on the package body

surface. The VS-709 device is hermetically sealed so an aqueous

wash is not an issue.

Terminal Plating: Electroless Au > 1.50 µm over

Electroless Ni > 1.90 µm

Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

ReliabilityReliability

Pin Out

Pin Symbol Function

CControl Voltage

2 FS Frequency Select

3 GND Case and Electrical Ground

4 Output Output

5 COutput Complementary Output

CC Power Supply Voltage

Frequency Select (Tri-State LV-CMOS)

FS Voltage Range Result

H (5VCC / 6) to VCC F2

M(V

CC / 2) ± 15%(VCC / 2) OD

L Gnd to (VCC / 6) F1

Tape Dimensions (mm) Reel Dimensions (mm)

Dimension W F Do Po P1 A B C D N W1 W2 #Per

Reel

Tolerance Typ. Typ. Typ. Typ. Typ. Typ. Min. Typ. Min. Min. Typ. Max.

VS-709 16 7.5 1.5 4 8 178 1.5 13 20.2 50 16.4 22.4 200

7 of 9 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

ReliabilityOutline Drawing & Pad Layout

Tape and Reel (EIA-481-2-A)

LV-CMOS Tri-State Control

Floating FS Results in OD

Standard Frequencies (MHz)

155.520000 M2 156.250000 M3 161.132813 M4 166.628572 M5 167.331646 N2 168.040678 N3 173.370748 ND

184.320000 NH 307.200000 RX 311.040000 P1 368.640000 RY 614.400000 RG 622.080000 P2 625.000000 P3

644.531250 P4 657.421875 PB 666.514286 P5 669.326582 R3 672.162712 R5 690.569196 R4 693.482991 R6

696.421478 V1 696.614900 V8 697.500000 VV 698.812330 VC 699.426250 VM 700.000000 W6 707.352650 TC

718.863800 V6 737.280000 TL 753.621100 VN 753.800000 W7 780.500000 W8 781.025550 VR 794.727800 VP

802.500000 VW 873.515414 WJ 905.499558 V7 993.409500 WK

8 of 9 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Ordering Information

VS- 709 - E C E - K A A N - P2 / P4

Product Family

VS: VCSO

Package

709: 5.0 x 7.0 x 1.8mm

Input

E: 3.3 V

H: 2.5 V

Output

C: LVPECL

D: LVDS

Operating Temperature

E: -40 to 85°C

Absolute Pull Range

K: ± 50 ppm

S: ± 100 ppm

T: ± 120 ppm

Enable Logic (Float Condition)

A: L=F1, M=OD, H=F2

Oscillator Gain

A: Standard

B: Low

Factory Use

N: N/A

Frequency 1

See Above

Other Frequencies Available Upon Request.

Frequency F1 Must Be Lower Than Frequency F2.

Frequencies F1 & F2 Must Be Selected Within One Frequency Range: (150 - 250), (300 - 500), (600 - 1000) [MHz]

Ordering Information

Frequency 2

See Above

Example1: VS-709-ECE-KAAN-M2/NH

Example2: VS-709-EDE-SAAN-R3/R4

9 of 9 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02Mar2014

Disclaimer

Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.

No rights under any patent accompany the sale of any such product(s) or information.

USA:

Vectron International

267 Lowell Road, Suite 102

Hudson, NH 03051

Tel: 1.888.328.7661

Fax: 1.888.329.8328

Europe:

Vectron International

Potsdamer Strasse, D-14513

Teltow, Germany

Tel: +49 (0) 3328.4784.17

Fax: +49 (0) 3328.4784.30

Asia:

Vectron International

68 Yin Cheng Road (C), 22nd Floor

One LuJiaZui

Pudong, Shanghai, 200120 China

Tel: +86.21.6194.6886

Fax: +86.21.6194..6699

For Additional Information, Please Contact

Revision History

Date Approved Description

30Jul2008 JM, BW Preliminary Release.

09Jan2009 BW Supply voltage, output type, operating temperature codes changed to universal part number codes.

30Jan2009 JM New rendering, phase noise plot, additional freq code.

05Nov2009 BW Additional frequency codes added.

24Feb2010 JM Rendering, outline, & order info modi ed to show ”/” between F1 and F2. Updated frequency codes. New Vc Pull &

Phase Noise Plots.

08Mar2010 JM Modi ed Jitter Note 8 on Pg2 for frequencies < 600 MHz. Updated Vc Pull Plots.

23Mar2010 BW O cial Release.

08Aug2011 JM Corrected production test notes on Pg3. Corrected contact phone numbers, added ±120 ppm APR order option and

frequency codes (VC,VM,VN,VP,VR,VV,VW) on Pg8.

22Mar2012 JM Added Phase Noise / Jitter Table on Pg5.

08Aug2012 BW Added following frequency codes (W6, W7, W8) on Pg8.

02Dec2013 TM, MK Added following frequency codes (WJ, WK) on Pg8. Added Address for Teltow

02Mar2014 MK Vectron Logo changed, Vectron Address Shanghai changed

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vectron:

VS-709-ECE-SAAN-P2/R3 VS-709-ECE-KAAN-P2/R3 VS-709-ECE-KAAN-P4/R6 VS-709-ECE-KAAN-PB/TC VS-

709-ECE-KAAN-R5/V8 VS-709-ECE-SAAN-P2/P4 VS-709-ECE-SAAN-P2/R5 VS-709-ECE-SAAN-R3/R6 VS-709-

ECE-SAAN-VC/VP