F-5
543-392
ABSOLUTE Digimatic Indicator ID-C
SERIES 543 — Standard Type
FEATURES
•AscompactasstandardSeries2dial
indicators.
•Large,easy-to-readLCD.
•GO/±NGjudgmentcanbeperformedby
setting upper and lower tolerance limits.
Thejudgmentresult(GO/±NG)canbe
displayedinfull-sizecharacters.
•Thepositive/negativecountresultingfrom
thespindle’sup/downmovementcanbe
toggled.
•Internal calculations using the simple formula
of[F(x)=Ax)]areavailable.
•EmployingtheABSOLUTE linear encoder, the
ID-C always displays the spindle "Absolute
Position" from the origin at power-on.
Also unlimited response speed eliminates
over-speed errors.
•TheID-Cindicatorfacecanberotated330°
to an appropriate angle for easy reading.
•WithSPCdataoutput.
Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.01mm type 0.01mm
0.001mm type* 0.001mm/0.01mm
.0005”/0.01mm type .0005”/0.01mm
.00005”/0.001mm type* .0005”/.0001” /.00005”
/0.01mm/0.001mm
* Switchable resolution
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Measuring force: Refer to the list of specifications
Battery: SR44(1pc.),938882
Battery life: Approx. 5,000 hours under normal use
Dust/Waterprotectionlevel:IP42orIP53(dust-prooftype)
Function
Origin-set/Preset,Zeroset,GO/±NGjudgment,Counting
direction switching, Power ON/OFF, Data output,
inch/mmconversion(oninch/metricmodelsonly)
Alarm: Low voltage, Counting value composition error,
Over-flow error, Tolerance limit setting error
Internal calculations using the simple formula of
[F(x)=Ax)]areavailable.
Optional Accessories
905338: SPCcable(40”/1m)
905409: SPCcable(80”/2m)
21EZA198: Spindleliftinglever(ISO/JIStype)*
21EZA199: Spindleliftinglever(ANSI/AGDtype)*
21EZA105: Spindleliftingknob(12.7mm/.5”ISO/JIStype)**
21EZA150: Spindleliftingknob(12.7mm/.5”ANSI/AGD
type)**
21EZA197: Spindleliftingknob(25.4mm/1”,50.8mm/2”
models)
21EZA200: Spindleliftingknob(50.8mm/2”)
540774: Spindleliftingcable(stroke:(1”/ 25.4mm)
02ACA571:
Auxiliary spindle spring for 25mm/1” models***
02ACA773:
Auxiliary spindle spring for 50mm/2” models***
––––––: Backs(SeepageF-33.)
––––––: Contactpoints(SeepageF-34.)
*Can be used on 12mm/.5” models only.
**Not available for low measuring force models.
***Requiredwhenorientinggageupsidedown.
543-402
543-472B 543-492B