2690 Series Coaxial Limiters Rev. V5 Features Outline 1 Broadband Frequency Ranges Environmentally Sealed Feedback Leveling Small Size Reduced VSWR .19 (4.83 mm) INPUT SMA PLUG .19 (4.83 mm) .38 (9.65 mm) SMA JACK .38 (9.65 mm) .90 (22.9 mm) Description series 2690 standard limiter is a line of completely passive solid state receiver protectors. They exhibit octave and multi-octave performance using a unique construction technique involving PIN diodes in broadband micro strip circuits. Careful diode selection allows a variety of device performance, trading off peak and average power handling, spike leakage and recovery time. Typical insertion loss and VSWR curves are shown below. Outline 2 .19 (4.83 mm) INPUT SMA PLUG .19 (4.83 mm) .38 (9.65 mm) SMA JACK .38 (9.65 mm) 1.25 (31.75 mm) Electrical Specifications: TA = 25C Part Number Frequency Range (GHz) Insertion Loss (dB) VSWR Average Power (W) Peak Power (W) Recovery Time (nS) Leakage Power (mW) Outline Drawing 2690-1001 1.0 - 2.0 0.7 1.5:1 1.0 100 100 75 1 0.9 1.5:1 3.0 1000 1000 100 2 1.1 1.6:1 1.0 100 100 50 1 1.3 1.6:1 3.0 1000 1000 100 2 1.8 2.0:1 1.0 100 100 50 1 2.3 2.0:1 3.0 1000 1000 100 2 2.0 2.0:1 1.0 100 100 50 1 2690-1014 2.2 2.0:1 2.0 500 250 75 1 2690-1015 2.3 2.0:1 3.0 1000 1000 100 2 2690-1003 2690-1005 2.0 - 8.0 2690-1007 2690-1009 8.0 - 18.0 2690-1011 2690-1013 1. 2. 3. 4. 2.0 - 18.0 Insertion Loss and VSWR measured at 0 dBm input power. Peak input power rated at 1 microsecond pulse width, 1% duty into 1.5:1 source VSWR and 1.15 load VSWR. Spike leakage energy: 0.5 ergs max. 1 dB compression: +7 dBm min. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2690 Series Coaxial Limiters Rev. V5 Absolute Maximum Ratings 5 Environmental Test MIL-STD Method Cond Parameter Non-Destructive Bond Pull 883 2023 -- Operating Temperature -55C to +85C Storage Temperature -65C to +125C Internal Visual 883 2017 -- Stabilization Bake 883 1008 B Thermal Cycle 883 1010 B Constant Acceleration 883 2001 A (Y1 Axis) Burn-In 883 1015 125C Fine Gross 883 883 1014 1014 A1 C1 External Visual 883 2009 -- Seal Absolute Maximum 5. Operation of this device above any one of these parameters may cause permanent damage. Devices are designed to meet the above screening conditions. Typical Performance Curves Insertion Loss VSWR 0.0 3.00 Insertion Loss (dB) 2.75 VSWR (Ratio) -1.0 -2.0 -3.0 2.50 2.25 2.00 1.75 1.50 1.25 -4.0 1.00 2 4 6 10 12 14 16 18 F re que nc y ( G H z) 2 4 6 8 10 12 14 16 18 F re que nc y ( G H z) Leakage Power at 100 mW Power Out (dBm) 25 20 15 10 5 0 0 10 20 30 40 50 60 P o we r In ( dB m ) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2690 Series Coaxial Limiters Rev. V5 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support