Agilent 6680A Series Single-Output, 5000 W DC Power Supplies, GPIB Data Sheet Reliable DC power for manufacturing test and long-term burn-in * Low output ripple and noise * Selectable compensation for inductive loads * Analog control of output voltage and current * Fan-speed control to minimize acoustic noise * Built-in measurements and advanced programmable features * Protection features to ensure DUT safety This series of 5000 watt DC power supplies has the exceptional, proven reliability that test system engineers look for. It also has the features needed for easy test system integration. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. Programming of the DC output and the extensive protection features can be done either from the front panel or using industry standard SCPI commands via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified by using the VXIplug&play drivers. The 6680A series has extremely low ripple and noise for a 5000 watt DC power supply. This helps the built-in measurement system make extremely accurate current and voltage measurements. Selectable compensation is provided for problem-free powering of inductive loads. Specifications Specifications (at 0 to 55 C unless otherwise specified) 6680A-J04 6680A 6681A 6682A 6683A 6684A Special order option Number of outputs 1 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Yes Voltage 0 to 5 V 0 to 8 V 0 to 21 V 0 to 32 V 0 to 40 V 0 to 3.3 V Current (40 C then derate linearly 1%/C from 40 C to 55 C) 0 to 875 A 0 to 580 A 0 to 240 A 0 to 160 A 0 to 128 A 0 to 1000 A Output ratings Programming accuracy at 25 C 5 C Voltage 0.04% + Current 0.1% + 5 mV 8 mV 21 mV 32 mV 40 mV 5 mV 450 mA 300 mA 125 mA 85 mA 65 mA 450 mA Ripple and noise constant voltage mode from 20 Hz to 20 MHz Voltage 1.5 mV 1.5 mV 1.5 mV 1.0 mV 1.0 mV 3.4 mV peak-to-peak 10 mV rms 10 mV 10 mV 10 mV 10 mV 15 mV Readback accuracy at 25 C 5 C (percent of reading plus fixed) Voltage 0.05% + 7.5 mV 12 mV 32 mV 48 mV 60 mV 7.5 mV Current 0.1% + 600 mA 400 mA 165 mA 110 mA 90 mA 600 mA Voltage 0.002% + 0.19 mV 0.3 mV 0.65 mV 1.1 mV 1.5 mV 0.19 mV Current 0.005% + 65 mA 40 mA 17 mA 12 mA 9 mA 77 mA Load and line regulation Transient response time Less than 900 s for the output voltage to recover to within 150 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product) 6680A-J04 6680A 6681A 6682A 6683A 6684A Special order option Ripple and noise constant current mode from 20 Hz to 20 MHz Current rms 290 mA 190 mA 40 mA 28 mA 23 mA -- Average programming resolution Voltage 1.35 mV 2.15 mV 5.7 mV 8.6 mV 10.8 mV 12 mV Current 235 mA 155 mA 64 mA 43 mA 34 mA 260 mV OVP 30 mV 45 mV 120 mV 180 mV 225 mV 25 mV 9 ms 12 ms 45 ms 60 ms 60 ms 9 ms Output voltage programming response time* (excluding command processing time) Output common-mode noise current (to signal-ground binding post) 1.5 mA 1.5 mA 3 mA 3 mA 3 mA 2.0 mA peak-to-peak 10 mA rms 10 mA 20 mA 20 mA 20 mA 12.5 mA * Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output voltage/rated output current. 2 Supplemental characteristics for all model numbers DC floating voltage: Output terminals can be floated up to 60 VDC from chassis ground Remote sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the voltage available for the load. Command processing time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for power supplies connected directly to the GPIB. Modulation: (Analog programming of output voltage and current): Input signal: 0 to -5 V for voltage, 0 to +5 V for current Input impedance: 30 k or greater AC input (47 to 63 Hz): 180 to 235 VAC (line-to-line, 3 phase), 27.7 A rms maximum worst case, 21.4 A rms nominal; 360 to 440 VAC, 14.3 A rms maximum worst case, 10.7 A rms nominal (maximum line current includes 5% unbalanced phase voltage condition.) Output voltage derated 5% at 50 Hz and below 200 VAC Input power: 7350 VA and 6000 W maximum; 160 W at no load GPIB interface capabilities: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, E1, and C0. IEEE-488.2 and SCPI command set. Software driver: * IVI-COM * VXIplug&play Size: 425.5 mm W x 221.5 mm H x 674.7 mm D (16.75 in x 8.75 in x 25.56 in) Weight: Net, 51.3 kg (113 lbs); shipping, 63.6 kg (140 lbs) Warranty: One year Agilent models: 6680A, 6681A, 6682A, 6683A, 6684A Top 12.7 mm 0.5" 425.5 mm 16.75" Buss Bar Detail 3/8" Diameter (6) - + 674.7 mm 26.56" 3 3/4" 28.6 mm 1.13" 667.3 mm 26.27" 574 mm 22.6" 30.2 mm 1.19" 65.1 mm 2.56" 221.5 mm 8.75" 27.8 mm 1.09" Rear 9.5 mm 0.38" Output Buss Bars Side 12.7 mm 0.5" 3 www.agilent.com www.agilent.com/find/6680 Ordering information The 6680A power supplies come with full documentation on CD-ROM. The CD-ROM includes user's guide, programming guide, service manual, quick start guide, and application notes. Opt 208 180 to 235 VAC, 3 phase, 47 to 63 Hz Opt 400 360 to 440 VAC, 3 phase, 47 to 63 Hz Opt 602 Two bus bar spacers for paralleling power supplies (p/n 5060-3514) Opt 0L1 Printed user's and programming guides Opt 0B3 Printed service manual Accessories 1CM028A* Rack mount flange kit 88.1 mm H (3U) and 132.6 mm H (2U) - 4 brackets (5U total) 1CP014A* Double rack mount flange and handle kit 88.1 mm H (2U) and 132.6 mm H (3U) E3663AC Support rails for Agilent rack cabinets p/n 5080-2148 Serial link cable 2 m (6.6 ft.) p/n 5060-3513 Three 30 A replacement fuses for 180 to 235 VAC line p/n 5060-3512 Three 16 A replacement fuses for 360 to 440 VAC line Application notes 6671A/72A/81A/82A/90A System DC Power Supplies Product Overview 5988-3050EN Agilent DC Power Supplies for Base Station Testing, 5988-2386EN 10 Practical Tips You Need to Know About Your Power Products, 5965-8239E * Support rails required For more information on Agilent Technologies' products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Agilent Advantage Services is committed to your success throughout your equipment's lifetime. To keep you competitive, we continually invest in tools and processes that speed up calibration and repair and reduce your cost of ownership. You can also use Infoline Web Services to manage equipment and services more effectively. By sharing our measurement and service expertise, we help you create the products that change our world. www.agilent.com/find/advantageservices Agilent Electronic Measurement Group DEKRA Certified ISO 9001:2008 Quality Management Sys System www.agilent.com/quality Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Agilent Channel Partners www.agilent.com/find/channelpartners Get the best of both worlds: Agilent's measurement expertise and product breadth, combined with channel partner convenience. Americas Canada Brazil Mexico United States (877) 894 4414 (11) 4197 3600 01800 5064 800 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 375 8100 Europe & Middle East Belgium 32 (0) 2 404 93 40 Denmark 45 45 80 12 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 /minute Germany Ireland Israel Italy Netherlands Spain Sweden United Kingdom 49 (0) 7031 464 6333 1890 924 204 972-3-9288-504/544 39 02 92 60 8484 31 (0) 20 547 2111 34 (91) 631 3300 0200-88 22 55 44 (0) 118 927 6201 For other unlisted countries: www.agilent.com/find/contactus Revised: January 6, 2012 Product specifications and descriptions in this document subject to change without notice. (c) Agilent Technologies, Inc. 2012 Published in USA, March 14, 2012 5990-9307EN