THT CURRENT SENSE TRANSFORMERS & INDUCTORS V DE VDE Approved Designed for switching power supply applications Transformer meets IEC950 insulation requirements Frequency range from 20kHz to 200kHz Electrical Specifications @ 25C -- Operating Temperature -40C to 130C Part Number Transformer with 2-1 T Primaries Schem. Figure -- PE-64487 PE-64488 PE-64517 PE-64518 PE-64519 -- 1C 1C 1C 1D 1D 1D -- Part Number Part Number Transformer Schem. Inductor without with 1T Figure Primary Primary PE-63586 PE-63587 PE-63588 -- PE-63618 PE-63619 PE-63691 1A 1A 1A -- 1B 1B 1B Schem. Figure Turns NS Secondary Inductance MH (MIN) Secondary Inductance Test Voltage (15.75 KHz) RS ( MAX) RT ( NOM) Primary Unipolar Amp Sec. Rating (MAX) Primary Bipolar Amp Sec. Rating (MAX) 2A 2A 2A 2B 2B 2B -- 50 100 200 50CT 100CT 200CT 300CT 5.0 20.0 80.0 5.0 20.0 80.0 180.0 0.5 1.0 2.0 0.5 1.0 2.0 3.0 0.7 1.40 4.50 0.7 1.40 4.50 11.0 50 100 200 50 100 200 300 150 300 600 150 300 600 900 300 600 1200 300 600 1200 1800 PE-51686 PE-51687 PE-51688 PE-51717 PE-51718 PE-51719 -- NOTES: 1. Maximum ratings specified with rated secondary terminating resistance and 1 turn primary. 2. Amp-microsecond (ASec.) rating of primary equals volt microsecond (VSec.) rating of secondary when secondary is terminated in rated resistance. (Amp--microseconds is equal to the product of a square pulse of current in amps, times the current pulse width in microseconds. 3. Maximum operating temperature 105C (ambient plus rise). 4. When terminated with rated terminating resistance, the inductor scale factor is Vout = 1 volt per amp. for center tapped units terminating resistance for each half of winding is listed value divided by two. 5. 1 turn primary peak sense current is 20 amps for all parts listed above. 6. RoHS compliant parts are being introduced. Please contact Pulse for RoHS compliant part availability. If available, order part by adding the suffix "NL" to the part number (i.e. PE-63586 becomes PE-63586NL). Mechanicals Schematics Inductor Transformer 1 6 3 PE-XXXXX 4 2 7 5 .170 4,32 MIN 0.900 MAX 22,86 0.700 MAX 17,78 0.800 20,32 .200 5,08 .051 .003 4X1,30 ,076 (Leads: 1,2,6,7) 0.700 17,78 .250 6,35 .030 .002 2X0,76 ,051 (Leads: 3,5) .500 12,70 For More Information: .015 0,38 MIN 0.500 12,70 .500/.700 MAX/MIN 12,7/17,78 0.500 12,70 .030 .002 0,76 0,05 Solderable Pin Dimensions: Inches mm 1D 3 6 7 .500 MIN 12,70 5 2 1C 1 2 1441 .010 MIN 0,25 2 5 3 1 4 0.652 17,01 MAX 1457 V DE 3 0.390 9,906 MAX 0.700 MAX 17,78 DATE CODE 1B 1A 1 5 3 1 2 4 6 7 5 2B 2A 1 1 2 3 3 Unless otherwise specified, all tolerances are .005 0,13 Pulse Worldwide Headquarters Pulse Northern Europe Pulse Southern Europe Pulse Pulse North China China Headquarters Room 1503 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870 XinYin Building No. 888 YiShan Road Shanghai 200233 China TEL: 86 21 54643211/2 FAX: 86 21 54643210 Pulse South Asia Pulse North Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 886 3 4641811 FAX: 886 3 4641911 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2006. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com P578.A (3/06)