Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Page 1 of 11
Features
Matched Pair of Amplifiers for Optimum Balanced Design
0.05 to 4.0 GHz Frequency Range
44 dBm Output IP3 (Balanced configuration)
41 dBm Output IP3 (Single-ended configuration)
15 dB Gain @ 2 GHz
23 dBm P1dBm
2.1 dB Noise Figure
RoHS Compliant 4X4 QFN Package
Single Positive Supply
+3V to +5V Voltage Rail
Supply Voltage
RF Input Power*
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+20 dBm
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Absolute Maximum Ratings
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
0.9
16.5
-13
-16
42
2.1
+23
2
15
-11
-12
41
2.1
+23
2.4
14.9
-20
-11
40.5
2.6
+24
GHz
dB
dB
dB
dBm
dB
dBm
Typical Parameters
Typical values reflect performance in recommended application circuit @ +5V.
CDQ6004-QS
General Description
The CDQ6004-QS is a dual high dynamic range amplifier designed
for applications operation within the 0.05 to 4.0 GHz frequency
range. Co-located matched amplifiers are assembled in the 4mm X
4mm QFN package. The low-cost, surface-mount, 16 terminal, plastic
package is RoHS compliant. The CDQ6004-QS is an ideal solution for
implementing balanced or push-pull designs. The amplifier can also
be used for dual-band operation where single-ended design is used
for each band. The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of low noise
figure and high IP3 at the same bias point make it an ideal transmit
or receive solution when used in applications including CATV
operating from 50 to 850 MHz, cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from 2.2
to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All
devices are 100% RF and DC tested.
Electrical Characteristics (T = 25ºC)
Parameter Condition
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
Externally Matched
Externally Matched
Externally Matched
Units
GHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min.
0.25
13.5
38
130
Typ.
15
-10
-10
41
2.1
23
160
5.0
Max.
3.0
200
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Notes:
1. T = 25ºC, Frequency = 2 GHz, 50 Ohm system.
2. Each single ended amplifier is tested separately.
3. OIP3 is measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
4. Slight performance degredation is expected over temperature.
Parameter Typical Units
Page 2 of 11
Typical Device S-Parameters
CDQ6004-QS
CDQ6004-QS
S21 Vs Voltage
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
012345678910
Frequency (GHz)
(dB)
S21 3V
S21 4V
S21 5V
CDQ6004-QS
S12 Vs Voltage
-30
-25
-20
-15
-10
-5
0
012345678910
Frequency (GHz)
(dB)
S12 3V
S12 4V
S12 5V
CDQ6004-QS
S22 Vs Voltage
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
012345678910
Frequency (GHz)
(dB)
S22 3V
S22 4V
S22 5V
CDQ6004-QS
S11 Vs Voltage
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
012345678910
Frequency (GHz)
(dB)
S11 3V
S11 4V
S11 5V
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
Page 3 of 11
Application Circuit @ 900 MHz
Schematic:
Board Layout:
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
CDQ6004-QS
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
0.9
16.5
-13
-16
42
2.1
23
GHz
dB
dB
dB
dBm
dB
dBm
Typical Performance:
Parameter Typical Units
Ref Designator
C2, C4, C6, C8
C1, C5
C3, C7
L1, L2
L3, L4
Value
2.7 pf
1.5 pf
1000 pf
47 nH
6.8 nH
Size
0402
0603
0805
0805
0603
Components
CDQ6004-QS Evaluatio n Board @ 900MHz
VD =5 V
-20
-15
-10
-5
0
5
10
15
20
00.511.52
Freque nc y (GHz)
-25
-15
-5
5
15
Gain
Input Re turn Loss
Output Return Loss
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
* Material: FR4, 28 mil
* Plating: 1.5 oz. Copper both sides
Page 4 of 11
Typical Performance @ 900 MHz (50 Ohm system over voltage)
CDQ6004-QS
CDQ6004-QS Eva lu atio n Board @ 0. 9GHz
Gain Over Voltage
0
2
4
6
8
10
12
14
16
18
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Fre quency (GHz)
Gain (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva lu ati on Board @ 0. 9G Hz
I n pu t Retu rn L o ss (S11) O ver Vo ltag e
-25
-20
-15
-10
-5
0
00.511.522.533.544.555.56
Frequency (GHz)
Return Loss (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva luatio n Board @ 0. 9GHz
Ou tpu t Retur n Lo ss (S2 2) O v er Vo ltag e
-25
-20
-15
-10
-5
0
00.511.522.533.544.555.56
Frequency (GHz)
Return Loss (d B)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva l u atio n Board @ 900M Hz
P1dB Over Voltage
12
14
16
18
20
22
24
26
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Drain Voltage (V)
P1dB (dBm)
CDQ6004-QS Eval u atio n Boar d @ 900MHz
OIP3 Over Voltage
24
26
28
30
32
34
36
38
40
42
44
1.52.02.53.03.54.04.55.05.5
Drain Voltage (V)
OI P 3 (dBm )
CDQ6004-QS Eva luati o n Board @ 900M Hz
Noise Figure Over Volta ge
1.6
1.8
2.0
2.2
2.4
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Drain Vo ltage ( V)
NF(dB)
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
Page 5 of 11
Application Circuit @ 1.9 GHz ~ 2.1 GHz:
CDQ6004-QS
Schematic:
Board Layout:
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
1.9
15.3
-11.9
-16.3
41
2.1
23
2.1
15.0
-12.5
-13.6
41.3
2.1
23
GHz
dB
dB
dB
dBm
dB
dBm
Typical Performance:
Parameter Typical Units
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
CDQ6004-QS Evaluation Bo ard @ 1.9GHz 2.1G H z
VD =5 V
-20
-15
-10
-5
0
5
10
15
20
00.5 11. 5 2 2.5 3
Frequenc y (GHz)
-25
-15
-5
5
15
Gain
Input Return Loss
Output Return Loss
Ref Designator
C2, C4, C6, C8
C1, C5
C3, C7
L1, L2
Value
100 pf
1.5 pf
1000 pf
47 nH
Size
0402
0603
0805
0805
Components
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
* Material: FR4, 28 mil
* Plating: 1.5 oz. Copper both sides
Page 6 of 11
Typical Performance @ 1.9 GHz (50 Ohm system over voltage)
CDQ6004-QS
CDQ6004-QS Evaluation Board @ 1.9 ~ 2.1
Gain Over V oltage
0
2
4
6
8
10
12
14
16
18
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Fre quency (GHz)
Gain (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva l ua tion Board @ 1.9~2.1GHz
I n p u t Retu r n L o ss (S 11) Ov er Vo ltag e
-25
-20
-15
-10
-5
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Fre que ncy (GHz)
Return Loss (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva lu ati o n Board @ 1. 9~2.1G Hz
Ou tp u t Retu rn L o ss (S22) O ver Vo ltag e
-25
-20
-15
-10
-5
0
00.511.522.533.544.555.56
Frequency (GHz)
Return Loss (d B)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva lu ati on Board @1.9GHz
P1dB Ove r Voltage
12
14
16
18
20
22
24
26
1.52.02.53.03.54.04.55.05.5
Drain Voltage (V)
P1dB (dBm )
CDQ6004-QS Eva l u ati o n Board @ 1.9G Hz
OIP3 Ove r Volta ge
24
26
28
30
32
34
36
38
40
42
44
1.52.02.53.03.54.04.55.05.5
Drain Voltage (V)
OIP3(dBm)
CDQ6004-QS Evaluati on Board @ 1. 9GHz
Noise Figure Over Voltage
1.6
1.8
2.0
2.2
2.4
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Drain Voltage (V)
NF (d B)
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
Page 7 of 11
Application Circuit @ 2.4 GHz:
Schematic:
Board Layout:
CDQ6004-QS
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
2.4
14.9
-20
-11
40.5
2.6
24
GHz
dB
dB
dB
dBm
dB
dBm
Typical Performance:
Parameter Typical Units
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
CDQ6004-QS Evaluation Bo ard @ 2.4GHz
VD =5 V
-20
-15
-10
-5
0
5
10
15
20
0 0.5 1 1.5 2 2.5 3 3.5
Fre quency (GHz)
-25
-15
-5
5
15
Gain
Input Return Loss
Output Return Loss
Ref Designator
C2, C4, C6, C8
C1, C5
C3, C7
L1, L2
Value
2.7 pf
1.2 pf
1000 pf
47 nH
Size
0402
0603
0805
0805
Components
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
* Material: FR4, 28 mil
* Plating: 1.5 oz. Copper both sides
Page 8 of 11
Typical Performance @ 2.4 GHz (50 Ohm system over voltage)
CDQ600 4-Q S Evalu ation Bo ard @ 2.4G Hz
Gai n Over Voltag e
0
2
4
6
8
10
12
14
16
18
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Frequency (GHz)
Gain (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Evaluation Board @ 2.4GHz
I n p u t Retur n L o ss (S11) O ver V o ltag e
-25
-20
-15
-10
-5
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Frequency (GHz)
Return Loss (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva luation Boa rd @ 2.4GHz
Output Return Loss (S22) Over Volta ge
-25
-20
-15
-10
-5
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Frequency (GHz)
Return Loss (dB)
Vd=2V Vd=3V
Vd=4V Vd=5V
CDQ6004-QS Eva l u ati o n Board @ 2.4G Hz
P1dB Over Voltage
12
14
16
18
20
22
24
26
1.52.02.53.03.54.04.55.05.5
Drain Voltage (V)
Output P 1d B(dBm)
CDQ6004-QS Evaluati on Board @ 2. 4GHz
OIP3 Over Voltage
22
24
26
28
30
32
34
36
38
40
42
44
46
48
1.52.02.53.03.54.04.55.05.5
Drain Voltage (V)
OIP3(dBm)
CDQ6004-QS Eval u atio n Bo ard @ 2. 4G Hz
Noise Figure Ove r Volta ge
2.0
2.2
2.4
2.6
2.8
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Drain Voltag e ( V)
NF(dB)
CDQ6004-QS
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
Page 9 of 11
Functional Block Diagram Pin Out Detail
Physical Dimensions
CDQ6004-QS
5
8
16
13
1,2,3,4
9,10,11,12
6,7,14,15
IN 1
IN 2
OUT 1
OUT 2
VS 1
VS 2
GND
Amplifier 1 RF Input
Amplifier 2 RF Input
Amplifier 1 RF Output
Amplifier 2 RF Output
Amplifier 1 Source Connection
Amplifier 2 Source Connection
Main Heat-Sinking Connection
Pin Function Description
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
0.65 1.00A2 0
E
E2
L
D2
e
K
b
D
0.35
0.20
2.50
0.25
4.00 BSC
0.40 0.45
2.65 2.80
0.65
--
0.30 0.35
4.00 BSC
NOM
0.20 REF
MIN
A3 0.80AMAX
0.90 1.00
2.50 2.65 2.80
A3
A2
DIE
A
D
E
b
D2
K
E2
e
L
WAFER LOT NUMBER
DATE CODE (YEAR/WEEK)
COUNTRY OF ORIGIN
(IF OTHER THAN USA)
100% MATTE TIN
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
Page 10 of 11
CDQ6004-QS
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MTTF
These numbers were calculated based on accelerated life test information received from the fabrication foundry and
measured thermal resistance.
CDQ6004-QS Vd=5.0 V, Id=150 mA
1.0E+06
1.0E+07
1.0E+08
1.0E+09
60 70 80 90 100 110
Backpl at e T emp erat u re ( d eg C )
MTT F (ho u rs)
CDQ6004-QS Vd=5.0 V, Id=150 mA
0
20
40
60
80
100
120
140
160
40 50 60 70 80 90 100 110
Backplate Temperature (deg C)
Tch (deg C)
May 2008 - Rev 01-May-08
Page 11 of 11
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
CDQ6004-QS
0.05-4.0 GHz
Dual High Dynamic Range Amplifier
Ordering Information
Part Number for Ordering Description
Matte Tin plated RoHS compliant QFN4x4 16L surface mount package in bulk quantity
Matte Tin plated RoHS compliant QFN4x4 16L surface mount package in tape and reel
CDQ6004-QS Evaluation Board @ 900 MHz
CDQ6004-QS Evaluation Board @ 1.9 GHz~2.1 GHz
CDQ6004-QS Evaluation Board @ 2.4 GHz
CDQ6004-QS-0G00
CDQ6004-QS-0G0T
PB-CDQ6004-QS-00A0
PB-CDQ6004-QS-00B0
PB-CDQ6004-QS-00C0
We also offer this product with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information
regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
May 2008 - Rev 01-May-08
