CUSTOMER DRAWING
Raychem
THERMOFIT
DEVICES
TITLE:
SOLDERSLEEVE DEVICE TERMINATION
WITH LEADS, LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: ST18-X-55-GA-CL
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
Print Date: 17-Jul-20 If this document is printed it becomes uncontrolled. Check for the latest revision
Shall Accommodate
Cable With Dimensions
*For Prod. Revisions: see individual MCD’s.
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI J-STD-006.
FLUX: TYPE ROL0 per ANSI J-STD-004.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED LEAD: RAYCHEM 55A0111 in accordance with MIL-W-22759/32. Stranded tin plated copper.
Color: see “CL”: lead colors available below.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 105C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields.
2. Temperature range: -55C to +125C.
3. When installed in accordance with Raychem Process Standard RCPS-100-70 assemblies will meet performance requirements
of Raychem Specification RT-1404.
Complete part number is defined as shown:
Lead color designation per MIL-STD-681.
20AWG-black, green, white
For best results, prepare the cable as shown:
22AWG-black, green, white
24AWG-black, green, blue, white
26AWG-black, green, white
All gauges: White with a single black stripe.
TE Connectivity, TE connectivity (logo), Raychem, Thermofit, and SolderSleeve are trademarks