CUSTOMER DRAWING Part Name Component Dimensions ST18-1-55-GA-CL Ident. Code ST181R ST18-2-55-GA-CL ST182R ST18-3-55-GA-CL ST183R ST18-4-55-GA-CL ST184R ST18-5-55-GA-CL ST185R *For Prod. Revisions: see individual MCD's. L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) B min 1.9 (0.075) 2.65 (0.105) 4.3 (0.170) 5.95 (0.235) 7.0 (0.275) C min 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) D min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate Cable With Dimensions E F H max min max 2.65 0.90 1.9 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.145) (0.055) (0.105) 5.08 2.15 4.3 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.6 4.30 7.0 (0.300) (0.170) (0.275) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL0 per ANSI J-STD-004. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: RAYCHEM 55A0111 in accordance with MIL-W-22759/32. Stranded tin plated copper. Color: see "CL": lead colors available below. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105C minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. Temperature range: -55C to +125C. 3. When installed in accordance with Raychem Process Standard RCPS-100-70 assemblies will meet performance requirements of Raychem Specification RT-1404. Complete part number is defined as shown: ST18-X 55 GA CL Size Lead type Lead Wire Lead color designation per MIL-STD-681. 1 to 5 M22759/32 Gauge (AWG) Colors available: 20, 22,24,26 20AWG-black, green, white For best results, prepare the cable as shown: 22AWG-black, green, white 24AWG-black, green, blue, white 26AWG-black, green, white All gauges: White with a single black stripe. TE Connectivity, TE connectivity (logo), Raychem, Thermofit, and SolderSleeve are trademarks Raychem THERMOFIT DEVICES TITLE: UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. SOLDERSLEEVE DEVICE TERMINATION WITH LEADS, LOW TEMPERATURE DOCUMENT NO.: ST18-X-55-GA-CL Revision: Issue Date: July 2020 6 DRAWN BY: DATE: SCALE: ECO: ECO-20-009992 M. FORONDA 06-June-00 None Print Date: 17-Jul-20 If this document is printed it becomes uncontrolled. Check for the latest revision SIZE: A SHEET: 1 of 1