MKT1820 www.vishay.com Vishay Roederstein DC Film Capacitors MKT Radial Potted Type FEATURES * AEC-Q200 qualified (rev. D) for PCM 22.5 mm (for larger available components on request) * High temperature capabilities, up to 150 C * Capacitance up to 560 F * 4-pin version available under request for pitch 37.5 mm, under request * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS * Automotive * DC filtering * Low voltage DC link QUICK REFERENCE DATA Capacitance range Capacitance tolerance Climatic testing class according to IEC 60068-1 Maximum application temperature Reference standards Dielectric Electrodes 1000 pF to 560 F 20 %, 10 %, 5 % 55/125/56 125 C IEC 60384-2 Polyester film Metallized Mono construction Construction Series construction (630 V and 1000 V) Encapsulation Leads Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Tinned wire C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer's type designation; manufacturer's logo or name; year and week of manufacture 63 VDC, 100 VDC, 160 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC 40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VAC 150 C at 0.3 UR for maximum 200 h (not applicable for pitch 37.5 mm) Marking Rated (DC) voltage Rated (AC) voltage Maximum operating temperature for limited time Note * For more detailed data and test requirements, contact dc-film@vishay.com DIMENSIONS in millimeters l w h 0.6 lt = 6 - 1 (other on request) PCM 0.4 Revision: 16-Feb-16 O dt Document Number: 26011 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) 0.1 CAPACITANCE (numerically) SPECIAL LETTER FOR SIZE Standard version 2 1 3 10 4 100 M Example: 433 330 nF 0.33 F 547 4700 nF 4.7 F 656 56 000 nF 56 F 727 270 000 nF 270 F Compact version SPECIAL LETTER FOR TAPED Bulk / Tray 5 1000 6 10 000 7 MKT 1820 4 33 01 4 METALLIZED POLYESTER Reel diameter 350 mm V Reel diameter 500 mm G Ammopack X TOLERANCE VOLTAGE TYPE CONSTRUCTION X W Un = 06 = 63 VDC 4 5% Un = 01 = 100 VDC 5 10 % Un = 16 = 160 VDC 6 20 % Un = 25 = 250 VDC Un = 40 = 400 VDC Un = 63 = 630 VDC Un = 10 = 1000 VDC Notes * For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 or end of catalog * For PCM 37.5 mm, 4 pin versions are available under customer request SPECIFIC REFERENCE DATA DESCRIPTION VALUE Tangent of loss angle: at 100 Hz at 1 kHz at 10 kHz at 100 kHz - 80 x 10-4 150 x 10-4 250 x 10-4 C 0.1 F 0.1 F < C 1.0 F - 80 x 10-4 150 x 10-4 - 1.0 F < C 10.0 F 35 x 10-4 150 x 10-4 - - 10.0 F < C 100 F 50 x 10-4 300 x 10-4 - - C > 100 F 70 x 10-4 - - - MAXIMUM PULSE RISE TIME (dU/dt)R [V/s] PITCH (mm) 63 VDC 100 VDC 160 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 10 12 18 - 36 52 70 260 15 8 10 - 20 32 66 130 22.5 5 6 - 12 18 38 68 27.5 3 5 6 8 14 28 50 37.5 0.8 1 2 3 - - - 52.5 0.2 0.3 0.4 1 - - - If the maximum pulse voltage is less than the rated voltage higher dU/dt values can be permitted. R between leads, for C 0.33 F and UR 100 V > 15 000 M R between leads, for C 0.33 F and UR > 100 V > 30 000 M RC between leads, for C > 0.33 F and UR 100 V > 5000 s RC between leads, for C > 0.33 F and UR > 100 V > 10 000 s R between leads and case, 100 V; (foil method) Withstanding (DC) voltage (cut off current 10 mA) > 30 000 M (1); rise time < 1000 V/s 1.6 x URDC, 1 min Withstanding (DC) leads and case 2 x URDC, 1 min Maximum application temperature 125 C Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 Revision: 16-Feb-16 Document Number: 26011 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 63 DIMENSIONS wxhxl (mm) PCM (mm) 422 3.5 x 8.0 x 13.0 10.0 MKT1820422065 0.33 433 3.5 x 8.0 x 13.0 10.0 MKT1820433065 0.47 447 3.5 x 8.0 x 13.0 10.0 MKT1820447065 0.68 468 4.0 x 9.0 x 13.0 10.0 MKT1820468065 1.0 510 4.5 x 9.5 x 13.0 10.0 MKT1820510065 1.5 515 5.5 x 10.5 x 13.0 10.0 MKT1820515065 2.2 522 6.5 x 11.5 x 13.0 10.0 MKT1820522065 3.3 533 9.0 x 15.5 x 13.0 10.0 MKT1820533065M 3.3 533 6.5 x 12.5 x 18.0 15.0 MKT1820533065 4.7 547 9.0 x 15.5 x 13.0 10.0 MKT1820547065M 4.7 547 7.5 x 13.5 x 18.0 15.0 MKT1820547065 6.8 568 8.5 x 14.5 x 18.0 15.0 MKT1820568065 10.0 610 8.5 x 17.5 x 18.0 15.0 15.0 615 8.5 x 16.5 x 26.5 22.5 MKT1820615065 22.0 622 10.5 x 18.5 x 26.5 22.5 MKT1820622065M 18.0 618 9.0 x 19.0 x 32.0 27.5 MKT1820618065 22.0 622 11.0 x 21.0 x 32.0 27.5 MKT1820622065 27.0 627 11.0 x 21.0 x 32.0 27.5 MKT1820627065 33.0 633 13.0 x 23.0 x 32.0 27.5 MKT1820633065 39.0 639 13.0 x 23.0 x 32.0 27.5 MKT1820639065 47.0 647 15.0 x 25.0 x 32.0 27.5 MKT1820647065 56.0 656 18.0 x 28.0 x 32.0 27.5 MKT1820656065 68.0 668 18.0 x 28.0 x 32.0 27.5 MKT1820668065 82.0 682 21.0 x 31.0 x 32.0 27.5 MKT1820682065 100.0 710 21.0 x 31.0 x 32.0 27.5 MKT1820710065M CAP. (F) CAPACITANCE CODE 0.22 VOLTAGE CODE 06 VAC 40 dt 0.08 mm (mm) 0.80 ORDERING CODE FOR 10 % TOL./BULK PACKING (1) MKT1820610065 100.0 710 18.5 x 35.5 x 43.0 37.5 MKT1820710065 120.0 712 18.5 x 35.5 x 43.0 37.5 MKT1820712065 150.0 715 18.5 x 35.5 x 43.0 37.5 MKT1820715065 180.0 718 21.5 x 38.5 x 43.0 37.5 220.0 722 24.0 x 44.0 x 42.0 37.5 MKT1820722065M 270.0 727 30.0 x 45.0 x 42.0 37.5 MKT1820727065M 330.0 733 30.0 x 45.0 x 42.0 37.5 MKT1820733065M 220.0 722 25.0 x 45.0 x 57.5 52.5 MKT1820722065 270.0 727 25.0 x 45.0 x 57.5 52.5 MKT1820727065 330.0 733 25.0 x 45.0 x 57.5 52.5 390.0 739 30.0 x 45.0 x 57.5 52.5 470.0 747 35.0 x 50.0 x 57.5 52.5 MKT1820747065 560.0 756 35.0 x 50.0 x 57.5 52.5 MKT1820756065 1.0 1.2 MKT1820718065 MKT1820733065 MKT1820739065 Note (1) Please replace "5" by: "4" for 5 % tolerance or "6" for 20 % tolerance Revision: 16-Feb-16 Document Number: 26011 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 100 CAP. (F) CAPACITANCE CODE VOLTAGE CODE VAC DIMENSIONS wxhxl (mm) PCM (mm) dt 0.08 mm (mm) ORDERING CODE FOR 10 % TOL./BULK PACKING (1) 0.068 368 3.5 x 8.0 x 13.0 10.0 MKT1820368015 0.10 410 3.5 x 8.0 x 13.0 10.0 MKT1820410015 0.15 415 3.5 x 8.0 x 13.0 10.0 MKT1820415015 0.22 422 3.5 x 8.0 x 13.0 10.0 MKT1820422015 0.33 433 4.0 x 9.0 x 13.0 10.0 MKT1820433015 0.47 447 4.5 x 9.5 x 13.0 10.0 MKT1820447015 0.68 468 5.5 x 10.5 x 13.0 10.0 MKT1820468015 1.0 510 5.5 x 10.5 x 13.0 10.0 MKT1820510015M 1.0 510 5.5 x 10.5 x 18.0 15.0 MKT1820510015 1.5 515 6.5 x 12.5 x 18.0 15.0 MKT1820515015 2.2 522 6.5 x 12.5 x 18.0 15.0 MKT1820522015 3.3 533 8.5 x 14.5 x 18.0 15.0 4.7 547 8.5 x 14.5 x 18.0 15.0 4.7 547 7.5 x 15.5 x 26.5 22.5 MKT1820547015 6.8 568 8.5 x 16.5 x 26.5 22.5 MKT1820568015 10.0 610 10.5 x 18.5 x 26.5 22.5 MKT1820610015 15.0 615 10.5 x 18.5 x 26.5 22.5 MKT1820615015M 15.0 615 11.0 x 21.0 x 32.0 27.5 MKT1820615015 18.0 618 13.0 x 23.0 x 32.0 27.5 MKT1820618015 22.0 622 13.0 x 23.0 x 32.0 27.5 MKT1820622015 27.0 627 15.0 x 25.0 x 32.0 27.5 MKT1820627015 33.0 633 18.0 x 28.0 x 32.0 27.5 MKT1820633015 39.0 639 18.0 x 28.0 x 32.0 27.5 MKT1820639015 47.0 647 21.0 x 31.0 x 32.0 27.5 MKT1820647015 56.0 656 21.0 x 31.0 x 32.0 27.5 MKT1820656015M 56.0 656 18.5 x 35.5 x 43.0 37.5 MKT1820656015 68.0 668 18.5 x 35.5 x 43.0 37.5 MKT1820668015 82.0 682 18.5 x 35.5 x 43.0 37.5 MKT1820682015 100.0 710 21.5 x 38.5 x 43.0 37.5 120.0 712 24.0 x 44.0 x 42.0 37.5 MKT1820712015M 150.0 715 30.0 x 45.0 x 42.0 37.5 MKT1820715015M 180.0 718 30.0 x 45.0 x 42.0 37.5 MKT1820718015M 120.0 712 25.0 x 45.0 x 57.5 52.5 MKT1820712015 150.0 715 25.0 x 45.0 x 57.5 52.5 MKT1820715015 180.0 718 25.0 x 45.0 x 57.5 52.5 220.0 722 30.0 x 45.0 x 57.5 52.5 270.0 727 35.0 x 50.0 x 57.5 52.5 MKT1820727015 330.0 733 35.0 x 50.0 x 57.5 52.5 MKT1820733015 01 63 MKT1820533015 0.8 1.0 1.2 MKT1820547015M MKT1820710015 MKT1820718015 MKT1820722015 Note (1) Please replace "5" by: "4" for 5 % tolerance or "6" for 20 % tolerance Revision: 16-Feb-16 Document Number: 26011 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 160 250 CAP. (F) CAPACITANCE CODE VOLTAGE CODE VAC DIMENSIONS wxhxl (mm) PCM (mm) dt 0.08 mm (mm) ORDERING CODE FOR 10 % TOL./BULK PACKING (1) 4.7 547 9.0 x 19.0 x 32.0 27.5 MKT1820547165 6.8 568 11.0 x 21.0 x 32.0 27.5 MKT1820568165 10.0 610 11.0 x 21.0 x 32.0 27.5 MKT1820610165 15.0 615 13.0 x 23.0 x 32.0 27.5 18.0 618 15.0 x 25.0 x 32.0 27.5 22.0 622 18.0 x 28.0 x 32.0 27.5 MKT1820622165 27.0 627 18.0 x 28.0 x 32.0 27.5 MKT1820627165 0.8 MKT1820615165 MKT1820618165 33.0 633 31.0 x 31.0 x 32.0 27.5 MKT1820633165M 33.0 633 18.5 x 35.5 x 43.0 37.5 MKT1820633165 39.0 639 18.5 x 35.5 x 43.0 37.5 MKT1820639165 47.0 647 18.5 x 35.5 x 43.0 37.5 MKT1820647165 56.0 656 21.5 x 38.5 x 43.0 37.5 68.0 668 21.5 x 38.5 x 43.0 37.5 82.0 682 24.0 x 44.0 x 42.0 37.5 MKT1820682165M 100.0 710 30.0 x 45.0 x 42.0 37.5 MKT1820710165M 16 63 1.0 MKT1820656165 MKT1820668165 120.0 712 30.0 x 45.0 x 42.0 37.5 MKT1820712165M 82.0 682 25.0 x 45.0 x 57.5 52.5 MKT1820682165 100.0 710 25.0 x 45.0 x 57.5 52.5 MKT1820710165 120.0 712 25.0 x 45.0 x 57.5 52.5 150.0 715 30.0 x 45.0 x 57.5 52.5 1.2 MKT1820712165 MKT1820715165 180.0 718 35.0 x 50.0 x 57.5 52.5 MKT1820718165 220.0 722 35.0 x 50.0 x 57.5 52.5 MKT1820722165 0.022 322 3.5 x 8.0 x 13.0 10.0 MKT1820322255 0.033 333 3.5 x 8.0 x 13.0 10.0 MKT1820333255 0.047 347 3.5 x 8.0 x 13.0 10.0 MKT1820347255 0.068 368 3.5 x 8.0 x 13.0 10.0 MKT1820368255 0.10 410 4.5 x 9.5 x 13.0 10.0 MKT1820410255 0.15 415 5.5 x 10.5 x 13.0 10.0 MKT1820415255 0.22 422 6.5 x 11.5 x 13.0 10.0 MKT1820422255 0.33 433 6.5 x 11.5 x 13.0 10.0 MKT1820433255M 0.33 433 5.5 x 10.5 x 18.0 15.0 0.47 447 9.0 x 15.5 x 13.0 10.0 MKT1820447255M 0.47 447 6.5 x 12.5 x 18.0 15.0 MKT1820447255 0.68 468 7.5 x 13.5 x 18.0 15.0 MKT1820468255 1.0 510 8.5 x 14.5 x 18.0 15.0 MKT1820510255 1.5 515 10.5 x 17,5 x 18.0 15.0 MKT1820515255M 1.5 515 8.5 x 16.5 x 26.5 22.5 MKT1820515255 2.2 522 10.5 x 18.5 x 26.5 22.5 MKT1820522255 3.3 533 12.5 x 20.0 x 26.5 22.5 MKT1820533255 25 160 0.8 MKT1820433255 Note (1) Please replace "5" by: "4" for 5 % tolerance or "6" for 20 % tolerance Revision: 16-Feb-16 Document Number: 26011 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 250 400 CAP. (F) CAPACITANCE CODE VOLTAGE CODE VAC DIMENSIONS wxhxl (mm) PCM (mm) dt 0.08 mm (mm) ORDERING CODE FOR 10 % TOL./BULK PACKING (1) 4.7 547 11.0 x 21.0 x 32.0 27.5 MKT1820547255 6.8 568 13.0 x 23.0 x 32.0 27.5 MKT1820568255 10.0 610 15.0 x 25.0 x 32.0 27.5 15.0 615 18.0 x 28.0 x 32.0 27.5 MKT1820615255 0.8 MKT1820610255 18.0 618 21.0 x 31.0 x 32.0 27.5 MKT1820618255M 18.0 618 18.5 x 35.5 x 43.0 37.5 MKT1820618255 22.0 622 18.5 x 35.5 x 43.0 37.5 MKT1820622255 27.0 627 18.5 x 35.5 x 43.0 37.5 MKT1820627255 33.0 633 21.5 x 38.5 x 43.0 37.5 39.0 639 21.5 x 38.5 x 43.0 37.5 47.0 647 24.0 x 44.0 x 42.0 37.5 MKT1820647255 56.0 656 30.0 x 45.0 x 42.0 37.5 MKT1820656255M 68.0 668 30.0 x 45.0 x 42.0 37.5 MKT1820668255M 25 100 1.0 MKT1820633255 MKT1820639255 56.0 656 25.0 x 45.0 x 57.5 52.5 MKT1820656255 68.0 668 25.0 x 45.0 x 57.5 52.5 MKT1820668255 82.0 682 25.0 x 45.0 x 57.5 52.5 100.0 710 30.0 x 45.0 x 57.5 52.5 120.0 712 35.0 x 50.0 x 57.5 52.5 MKT1820712255 0.010 310 3.5 x 8.0 x 13.0 10.0 MKT1820310405 0.015 315 3.5 x 8.0 x 13.0 10.0 MKT1820315405 0.022 322 3.5 x 8.0 x 13.0 10.0 MKT1820322405 0.033 333 4.0 x 9.0 x 13.0 10.0 MKT1820333405 0.047 347 4.5 x 9.5 x 13.0 10.0 MKT1820347405 0.068 368 5.5 x 10.5 x 13.0 10.0 MKT1820368405 0.10 410 6.5 x 11.5 x 13.0 10.0 MKT1820410405 0.15 415 9.0 x 15.5 x13.0 10.0 MKT1820415405M 0.15 415 6.5 x 12.5 x 18.0 15.0 MKT1820415405 0.22 422 9.0 x 15.5 x 13.0 10.0 MKT1820422405M 0.22 422 6.5 x 12.5 x 18.0 15.0 0.33 433 7.5 x 13.5 x 18.0 15.0 MKT1820433405 0.47 447 8.5 x 17.5 x 18.0 15.0 MKT1820447405 40 200 1.2 MKT1820682255 MKT1820710255 0.8 MKT1820422405 0.68 468 8.5 x 16.5 x 26.5 22.5 MKT1820468405 1.0 510 10.5 x 18.5 x 26.5 22.5 MKT1820510405 1.5 515 11.0 x 21.0 x 26.5 22,5 MKT1820515405M 1.5 515 11.0 x 21.0 x 31.0 27.5 MKT1820515405 2.2 522 13.5 x 23.5 x 31.5 27.5 MKT1820522405 3.3 533 15 x 24.5 x 31.5 27.5 MKT1820533405 4.7 547 18.0 x 28.0 x 31.5 27.5 MKT1820547405 Note (1) Please replace "5" by: "4" for 5 % tolerance or "6" for 20 % tolerance Revision: 16-Feb-16 Document Number: 26011 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 630 1000 DIMENSIONS wxhxl (mm) PCM (mm) 210 3.5 x 8.0 x 13.0 10.0 MKT1820210635 215 3.5 x 8.0 x 13.0 10.0 MKT1820215635 0.0022 222 3.5 x 8.0 x 13.0 10.0 MKT1820222635 0.0033 233 3.5 x 8.0 x 13.0 10.0 MKT1820233635 0.0047 247 3.5 x 8.0 x 13.0 10.0 MKT1820247635 0.0068 268 3.5 x 8.0 x 13.0 10.0 MKT1820268635 0.010 310 4.0 x 9.0 x 13.0 10.0 MKT1820310635 0.015 315 4.5 x 9.5 x 13.0 10.0 MKT1820315635 0.022 322 5.5 x 10.5 x 13.0 10.0 MKT1820322635 0.033 333 6.5 x 11.5 x 13.0 10.0 MKT1820333635M 0.033 333 5.5 x 10.5 x 18.0 15.0 0.047 347 6.5 x 11.5 x 13.0 10.0 0.047 347 6.5 x 12.5 x 18.0 15.0 0.068 368 7.5 x 13.5 x 18.0 15.0 MKT1820368635 0.10 410 7.5 x 13.5 x 18.0 15.0 MKT1820410635M 0.10 410 6.5 x 14.5 x 26.5 22.5 MKT1820410635 0.15 415 7.5 x 15.5 x 26.5 22.5 MKT1820415635 0.22 422 8.5 x 16.5 x 26.5 22.5 MKT1820422635 0.33 433 11.0 x 21.0 x 31.0 27.5 MKT1820433635 0.47 447 11.0 x 21.0 x 31.0 27.5 MKT1820447635 0.68 468 13.5 x 23.5 x 31.5 27.5 MKT1820468635 1.0 510 15.0 x 24.5 x 31.5 27.5 MKT1820510635 1.5 515 18.0 x 28.0 x 31.5 27.5 MKT1820515635 0.0010 210 4.0 x 9.0 x 13.0 10.0 MKT1820210105 0.0015 215 4.0 x 9.0 x 13.0 10.0 MKT1820215105 0.0022 222 4.0 x 9.0 x 13.0 10.0 MKT1820222105 0.0033 233 4.0 x 9.0 x 13.0 10.0 MKT1820233105 0.0047 247 5.5 x 10.5 x 13.0 10.0 MKT1820247105 0.0068 268 6.5 x 11.5 x 13.0 10.0 MKT1820268105 0.010 310 5.5 x 10.5 x 18.0 15.0 MKT1820310105 0.015 315 6.5 x 12.5 x 18.0 15.0 MKT1820315105 0.022 322 7.5 x 13.5 x 18.0 15.0 0.033 333 8.5 x 14.5 x 18.0 15.0 0.033 333 6.5 x 14.5 x 26.5 22.5 MKT1820333105 0.047 347 7.5 x 15.5 x 26.5 22.5 MKT1820347105 CAP. (F) CAPACITANCE CODE 0.0010 0.0015 VOLTAGE CODE 63 10 VAC 220 220 dt 0.08 mm (mm) ORDERING CODE FOR 10 % TOL./BULK PACKING (1) MKT1820333635 0.80 MKT1820347635M MKT1820347635 0.80 MKT1820322105 MKT1820333105M 0.068 368 8.5 x 16.5 x 26.5 22.5 MKT1820368105 0.10 410 10.5 x 18.5 x 26.5 22.5 MKT1820410105 0.15 415 11.0 x 21.0 x 31.0 27.5 MKT1820415105 0.22 422 13.5 x 23.5 x 31.5 27.5 MKT1820422105 0.33 433 16.5 x 29.5 x 31.5 27.5 MKT1820433105 0.47 447 20.0 x 35.0 x 31.5 27.5 MKT1820447105 Note (1) Please replace "5" by: "4" for 5 % tolerance or "6" for 20 % tolerance Revision: 16-Feb-16 Document Number: 26011 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein RECOMMENDED PACKAGING PACKAGING TYPE OF HEIGHT (H) CODE PACKAGING (mm) G Ammo 18.5 W Reel 18.5 V Reel 18.5 G Ammo 18.5 - Bulk REEL DIAMETER/ BOX SIZE (mm) 55 x 210 x 340 350 500 60 x 360 x 510 ORDERING CODE EXAMPLES MKT1820410405G MKT1820410405W MKT1820422635V MKT1820422635G PITCH 10 x x - PITCH 15 x x x - - MKT1820515405 x x - PITCH PITCH 22.5 TO 27.5 37.5 TO 52.5 x x x x EXAMPLE OF ORDERING CODE TYPE MKT1820 CAPACITANCE CODE 410 VOLTAGE CODE 06 TOLERANCE CODE (1) 5 PACKAGING CODE G MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. * For pitches 15 mm the capacitors shall be mechanically fixed by the leads * For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawings. * For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm * For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm; h = 0.1 mm * For products with 27.5 mm < pitch 52.5 mm, w = l = 0.5 mm; h = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + w Eccentricity Imax. = I + I CBA116 hmax. = h + h Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 Storage Temperature Tstg = -25 C to +35 C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 16-Feb-16 Document Number: 26011 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein CHARACTERISTICS PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT Tamb 85 C 100 Capacitance in F 1000 7 5 Capacitance in F VRMS VRMS 7 5 0.3 3 0.6 8 3 2 3 1.5 3.3 10 7 2 1 102 2 3 5 7 103 2 3 0.2 2 0.4 22 7 33 1 5 7 104 2.2 68 3 2 0 56 0 63 VDC 0.1 15 5 33 68 15 3 33 100 7 6.8 5 0.0 6.8 2 12 0 250 63 VDC VDC 2 3 1 2 10 5 7 105 2 3 5 7 103 2 3 5 7 104 2 3 f (Hz) f (Hz) VRMS 7 5 Capacitance in F 0.1 0.3 VRMS 1000 100 3 0.6 8 3 2 7 2 100 7 10 5 2 1 102 2 5 7 103 3 2 3 1 0.4 7 0.2 2 0.1 3 5 7 104 0.0 47 0.0 22 0. 01 2 0 33 0 100 VDC 1.5 5 15 47 10 3 Capacitance in F 7 5 3 1.5 3.3 10 400 VDC 2 3 1 2 10 5 7 105 2 3 5 7 103 2 3 5 7 104 2 3 f (Hz) 100 Capacitance in F 7 5 4.7 5 7 105 f (Hz) 1000 VRMS VRMS 5 7 105 Capacitance in pF and F 7 5 10 3 3 2 18 10 7 10 00 2 1.0 100 47 0.4 7 5 7 0.22 5 12 0 3 0.1 22 00 47 0.0 22 0.0 4 1 700 0.0 3 22 0 2 2 160 VDC 1 102 2 3 630 VDC 5 7 103 2 3 5 7 104 2 3 5 7 105 f (Hz) Revision: 16-Feb-16 1 2 10 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f (Hz) Document Number: 26011 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein CHARACTERISTICS PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT Tamb 85 C VRMS 1000 Capacitance in pF and F 7 5 3 10 00 2 0.4 7 0.2 2 100 0.1 7 22 00 0.0 1 47 00 0.0 47 0. 0 22 5 3 2 1000 VDC 1 2 10 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f (Hz) CHARACTERISTICS 12 Factor C = (%) C 1.2 10 1.0 8 6 0.8 4 0.6 2 0 0.4 -2 -4 0.2 -6 0.0 - 60 - 10 40 -8 - 60 90 Tamb (C) 140 - 40 - 20 0 20 40 60 80 100 Capacitance vs. Temperature C/C = f () Nominal voltage (AC and DC) as a function of temperature Capacitance as a function of temperature (typical curve) 16 C = (%) C 1 14 12 0 -1 10 -2 8 -3 6 -4 4 -5 2 -6 140 tan = 10-3 2 120 Tamb (C) 102 2 3 5 7 104 Capacitance Change vs. Frequency C = f (f) C 2 3 5 7 103 2 3 Capacitance as a function of frequency (typical curve) Revision: 16-Feb-16 5 7 105 f (Hz) 0 - 60 - 40 - 20 0 20 40 60 80 Dissipation Factor (1 kHz) vs. Temperature tan = f () 100 120 140 Tamb (C) Dissipation factor as a function of temperature (typical curve) Document Number: 26011 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein 105 tan x 104 RC (s) 100 7 5 104 3 2 10 7 5 103 3 2 2 10 1 7 5 101 3 2 100 20 40 60 80 100 0.1 102 125 Tamb (C) 2 3 5 7 103 2 3 5 7 104 2 3 Dissipation Factor vs. Frequency tan = f (f) Insulation resistance as a function of temperature (typical curve) 5 7 105 f (Hz) Dissipation factor as a function of frequency (typical curve) T (K) 16 14 12 10 8 6 4 2 0 - 60 - 40 - 20 0 20 40 60 80 100 120 140 Tamb (C) Maximum allowed component temperature rise (T) as function of ambient temperature (Tamb) Revision: 16-Feb-16 Document Number: 26011 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein HEAT CONDUCTIVITY (G) AS A FUNCTION OF CAPACITOR BODY THICKNESS IN mW/C HEAT CONDUCTIVITY (mW/C) Wmax. (mm) PITCH 10.0 mm PITCH 15.0 mm PITCH 22.5 mm PITCH 27.5 mm PITCH 37.5 mm PITCH 52.5 mm 3.5 4.0 4.5 5.5 6.5 7.5 8.5 9.0 10.5 11.0 11.5 12.5 13.0 13.5 15.0 16.5 18.0 18.5 20.0 21.0 21.5 24.0 25.0 30.0 35.0 5.0 6.0 7.0 8.0 10.0 - 10.0 13.0 15.0 16.0 - 20.0 22.0 24.0 30.0 34.0 - 32.0 38.0 38.0 45.0 45.0 50.0 58.0 60.0 73.0 70.0 - 90.0 102.0 118.0 135.0 - 155.0 170.0 200.0 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: * T = component temperature rise (C) with a maximum of 15 C * P = power dissipation of the component (mW) * G = heat conductivity of the component (mW/C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. Revision: 16-Feb-16 Document Number: 26011 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC) 2. The peak-to-peak voltage (UP-P) shall not be greater than the maximum (UP-P) to avoid the ionization inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x ------- x dt U NDC x ------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits (see graph "Max. allowed component temperature rise"). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: "Heat conductivity" 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). 7. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact dc-film@vishay.com. VOLTAGE CONDITIONS FOR 6 ABOVE Tamb 85 C 85 C < Tamb 100 C 100 C < Tamb 125 C URAC 0.8 x URAC 0.5 x URAC Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URAC URAC 0.6 x URAC Maximum peak voltage (VO-P) (< 2 s) 1.6 x URDC 1.3 x URDC 0.5 x URDC ALLOWED VOLTAGES Maximum continuous RMS voltage Revision: 16-Feb-16 Document Number: 26011 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-2 and Specific Reference Data". GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapter "General Data" of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: for C 1 F at 10 kHz for 1 F < C < 100 F at 1 kHz for C 100 F at 100 Hz 4.3 Robustness of terminations Tensile and bending 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 C 5 C Duration: 10 s No visible damage 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan : 0.003 for C 1 F or 0.002 for C > 1 F 0.004 for C 100 F Compared to values measured in 4.3.1 SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle: for C 1 F at 10 kHz for 1 F < C < 100 F at 1 kHz for C 100 F at 100 Hz 4.6 Rapid change of temperature A = -55 C B = +125 C 5 cycles Duration t = 30 min Visual examination 4.7 Vibration Mounting: see section "Mounting" of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Visual examination 4.9 Mounting: see section "Mounting" for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Shock Revision: 16-Feb-16 No visible damage Legible marking No visible damage Document Number: 26011 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9.3 Final measurements CONDITIONS PERFORMANCE REQUIREMENTS Visual examination No visible damage Capacitance |C/C| 5 % of the value measured in 4.6.1 Tangent of loss angle For C 1 F at 10 kHz For 1 F < C < 100 F at 1 kHz For C 100 F at 100 Hz Increase of tan : 0.003 for C 1 F or 0.002 for C > 1 F 0.004 for C 100 F Compared to values measured in 4.6.1 Insulation resistance As specified in section "Insulation Resistance" of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements SUB-GROUP C2 4.11 Damp heat steady state Temperature: +125 C Duration: 16 h Temperature: -55 C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown or flashover Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.4.2 or 4.9.3 Tangent of loss angle For C 1 F at 10 kHz For 1 F < C < 100 F at 1 kHz For C 100 F at 100 Hz Increase of tan : 0.005 for C 1 F or 0.003 for C > 1 F 0.004 for C 100 F Compared to values measured in 4.3.1 or 4.6.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification 56 days; 40 C; 90 % to 95 % RH 4.11.1 Initial measurements Capacitance Tangent of loss angle For C 1 F at 10 kHz For 1 F < C < 100 F at 1 kHz For C 100 F at 100 Hz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown or flashover Visual examination No visible damage Legible marking Revision: 16-Feb-16 Document Number: 26011 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT1820 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C2 4.11.3 Final measurements CONDITIONS PERFORMANCE REQUIREMENTS Capacitance |C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle For C 1 F at 10 kHz For 1 F < C < 100 F at 1 kHz For C 100 F at 100 Hz Increase of tan 0.005 for C 1 F or 0.003 for C > 1 F 0.004 for C 100 F Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C3 4.12 Endurance Duration: 2000 h 1.25 x URDC at 85 C 1.0 x URDC at 100 C 0.6 x URDC at 125 C Duration: 200 h 0.3 x URDC at 150 C (not applicable for pitch 37.5 mm) 4.12.1 Initial measurements Capacitance Tangent of loss angle: for C 1 F at 10 kHz for 1 F < C < 100 F at 1 kHz for C 100 F at 100 Hz 4.12.5 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % compared to values measured in 4.12.1 Tangent of loss angle For C 1 F at 10 kHz For 1 F < C < 100 F at 1 kHz For C 100 F at 100 Hz Increase of tan : 0.003 for C 1 F or 0.002 for 1 F < C < 100 F 0.004 for C 100 F Compared to values measured in 4.12.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to URDC Discharge resistance: UR R = -----------------------------------------------C x K x dU dt R K = 5 for pitch 27.5 mm K = 1.5 for pitch 37.5 mm/52.5 mm 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C 1 F at 10 kHz for 1 F < C < 100 F at 1 kHz for C 100 F at 100 Hz 4.13.3 Final measurements Capacitance |C/C| 3 % compared to values measured in 4.13.1 Tangent of loss angle: Increase of tan : 0.003 for C 1 F or 0.002 for C > 1 F 0.004 for C 100 F Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Revision: 16-Feb-16 Document Number: 26011 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000