Model 533 Temperature Compensated Crystal Oscillator FEATURES * * * * * * * * * * HCMOS Output Optional Voltage Control for Frequency Tuning [VCTCXO] 5.0mmx3.2mm Surface Mount Package Frequency Range 10 - 40 and 50 MHz [Standard Frequencies List Shown Below] Fundamental Crystal Design Frequency Stability, Standard Values from 2.0ppm to 5.0ppm Operating Voltage, +2.8Vdc, 3.0V and +3.3Vdc Operating Temperature to -40C to +85C Tape & Reel Packaging, EIA-418 RoHS/Green Compliant (6/6) APPLICATIONS The Model 533 Temperature Compensated Crystal Oscillator (TCXO) is a quartz based, HCMOS output, digital temperature compensated oscillator with optional frequency tuning, in a hermetically sealed ceramic package. M533 is suitable for wireless communications, broadband access, WLAN/WiMax/WIFI, portable equipment, test and measurement and mobile phone applications. ORDERING INFORMATION 533 M FREQUENCY IN MHz SUPPLY VOLTAGE T = +2.8Vdc R = +3.0Vdc L = +3.3Vdc M - indicates MHz and decimal point. 3 [See table below for standard frequencies available.] FREQUENCY TUNING (AFC) FREQUENCY STABILITY * 05 10 15 20 25 40 50 = = = = = = = 0.5 ppm 1.0 ppm 1.5 ppm 2.0 ppm 2.5 ppm 4.0 ppm 5.0 ppm A = 5 ppm T = TCXO (no AFC) 1 {VCON: 1.5Vdc 1.0Vdc} 1 1 OPERATING TEMPERATURE RANGE 2 H = -10C to +60C C = -20C to +70C D = -30C to +85C I = -40C to +85C * Frequency vs. Temperature Only 1] Limited availability. Please consult factory. 2] Only available with temperature range codes "H" and "C". 3] Frequency is recorded with two leading digits before the `M' and 4 significant digits after the `M' (including zeros). [Ex. XXMXXXX (10M0000), XXMXXXX (16M3840)] Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. M533 Standard Frequencies 10.000 MHz 14.7456 MHz 19.440 MHz 25.000 MHz 40.000 MHz 12.288 MHz 16.000 MHz 19.680 MHz 26.000 MHz 50.000 MHz 12.800 MHz 16.384 MHz 20.000 MHz 27.000 MHz 13.000 MHz 19.200 MHz 24.576 MHz 32.000 MHz Document No. 008-0341-0 Page 1 - 4 www.ctscorp.com Rev. C Model 533 TCXO/VC-TCXO - HCMOS ELECTRICAL CHARACTERISTICS PARAMETER Maximum Supply Voltage Maximum Control Voltage SYMBOL VCC VC Storage Temperature TSTG Frequency Range Frequency Stability Frequency Stability vs. Initial Calibration vs. Supply Voltage vs. Load vs. Reflow Shift fO f/fO - ELECTRICAL PARAMETERS vs. Aging Operating Temperature Order Code 'H' Order Code 'C' Order Code 'D' Order Code 'I' Supply Voltage Order Code 'T' Order Code 'R' Order Code 'L' Supply Current Control Voltage Frequency Tuning [VCTCXO Only] VC Input Impedance Output Waveform Output Voltage Levels Logic '1' Level Logic '0' Level Output Load Rise and Fall Time Output Duty Cycle Start Up Time CONDITIONS - MIN -0.5 -0.5 TYP - MAX 6.0 VCC - -40 - 85 C 10 - 50 MHz ppm Std frequencies listed in Ordering Information Frequency vs. Temperature Only @25C 5% change 10% change After 2 reflows 1st year 10 year TA - VCC 5% ICC 10 - 40 MHz 50 MHz VC ZVC VC = 1.5V 1.0V - Reference Ordering Information UNIT V V - 0.3 - 3.0 0.5 0.2 2.0 1.0 10.0 -10 -20 -30 -40 25 60 70 85 85 2.66 2.85 3.14 0.5 5.0 2.8 3.0 3.3 1.5 - 2.94 3.15 3.47 5.0 8.0 2.5 - V ppm 500 - - kOhm 0.9*VCC 3.0 - 0.1*VCC V 15 6.0 55 2 pF ns % ms ppm C V mA DC coupled CMOS VOH VOL CL TR, TF SYM TS CMOS Load CMOS Load @ 20% - 80% Levels @ 50% Level - 45 - Phase Noise 1 Notes: 1. Phase Noise performance may vary based on output frequency. See example plot at 10 MHz below. dBc/Hz SINGLE SIDE BAND PHASE NOISE (typical maximums @ 10 MHz) Frequency Phase Noise Offset (dBc/Hz) 10 Hz -90 100 Hz -115 1k Hz -135 10k Hz -148 Document No. 008-0341-0 Page 2 - 4 Rev. C Model 533 TCXO/VC-TCXO - HCMOS MECHANICAL SPECIFICATIONS MARKING INFORMATION 1. M533 - CTS Model Series. 2. - Pin 1 identifier. 3. C - CTS identifier. 4. D - Date code. See Table II for codes. 5. XXX - Frequency code. See Table I for codes. PACKAGE DRAWING (5.0 0.2) 0.197 0.008 (1.10) 0.043 PIN 1 IDENTIFIER M533 CDXXX (2.30) 0.091 (3.2 0.2) 0.126 0.008 3 4 2 1 Complete CTS part number, frequency value and date code information must appear on reel and carton labels. (0.70) 0.028 NOTES 1. DO NOT make connections to non-labeled pins. Castellation pins may have internal connections used in the manufacturing process. 2. Termination pads (e4); barrier plating is nickel (Ni) with gold (Au) flash plate. 3. Reflow conditions per JEDEC J-STD-020, 260C maximum. (3.70) 0.146 (1.2) MAX 0.047 Key: SUGGESTED SOLDER PAD GEOMETRY (mm) Inch TABLE I - FREQUENCY CODING 0.055 [1.40] C BYPASS 0.043 [1.10] 4 FREQUENCY MARKING CODE 10.000 MHz 10.240 MHz 3 0.091 [2.30] 1 2 0.150 [3.80] [mm] Key: Inch CBYPASS should be 0.01 uF. FREQUENCY MARKING CODE 100 16.367 MHz 16A 19.800 MHz 198 30.720 MHz 307 102 16.3676 MHz 16E 19.998 MHz 199 32.000 MHz 320 12.000 MHz 120 16.367667 MHz 16B 20.000 MHz 200 32.512 MHz 325 12.288 MHz 122 16.368 MHz 16C 20.480 MHz 204 32.768 MHz 327 12.800 MHz 128 16.369 MHZ 16D 21.000 MHz 210 33.600 MHz 336 FREQUENCY MARKING CODE MARKING CODE FREQUENCY 13.000 MHz 130 16.384 MHz 163 24.000 MHz 240 36.000 MHz 360 13.500 MHz 135 16.800 MHz 168 24.5535 MHz 24B 38.400 MHz 384 14.000 MHz 140 18.000 MHz 180 24.576 MHz 24C 38.880 MHz 388 14.400 MHz 144 18.432 MHz 184 25.000 MHz 250 40.000 MHz 400 14.7456 MHz 147 19.200 MHz 192 26.000 MHz 260 50.000 MHz 500 15.360 MHz 153 19.440 MHz 194 27.000 MHz 270 16.000 MHz 160 19.680 MHz 196 30.000 MHz 300 SEP OCT Not all frequencies listed may be available for this design. TABLE II - DATE CODE MONTH JAN YEAR FEB APR MAY JUN JUL AUG NOV DEC M 2001 2005 2009 2013 2017 A B C D E F G H J K L 2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z 2003 2007 2011 2015 2019 a b c d e f g h j k l m 2004 2008 2012 2016 2020 n p q r s t u v w x y z TEST CIRCUIT - RL//CL LOAD + mA D.U.T. PIN ASSIGNMENTS PIN - 4 + + POWER SUPPLY - MAR VM 0.01uF 3 D.U.T. CL 1 2 Including probe capacitance. SYMBOL 1 VC 2 3 4 GND Output VCC DESCRIPTION Control Voltage - VCTCXO (Note 1) GND - TCXO Circuit & Package Ground CMOS Output Supply Voltage NOTES 1. Connect to ground for TCXO (no AFC) option. No Connect Document No. 008-0341-0 Page 3 - 4 Rev. C Model 533 TCXO/VC-TCXO - HCMOS PACKAGING INFORMATION Device quantity is 1,000 pieces per 180mm reel. 17.5 4.0 8.0 O1.50 1.75 1.90 1.70 2.0 O13 120 16.0 5.60 5.20 O60 3.70 3.50 O180 O23 DIRECTION OF FEED Dimensions in Millimeters ENVIRONMENTAL SPECIFICATIONS Temperature Cycle: 400 cycles from -55C to +125C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. Mechanical Shock: 1,500g's, 0.5mS duration, 1/2 sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). Sinusoidal Vibration: 0.06 inches double amplitude, 10 to 55 Hz and 20g's, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). Gross Leak: No leak shall appear while immersed in an FC40 or equivalent liquid at +125C for 20 seconds. Fine Leak: Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent. Resistance to Solder Heat: Product must survive 3 reflows of +250C maximum, 10 seconds maximum. High Temperature Operating Bias: 2,000 hours at +125C, disregarding frequency shift. Frequency Aging: 1,000 hours at +85C. Insulation Resistance: 500M Ohms @ 100VDC 15VDC. Moisture Sensitivity Level: Level 1 per JEDEC J-STD-020. Document No. 008-0341-0 Page 4 - 4 Rev. C