PHOTO IC Transmitter/Receiver photo IC for optical link L10063-01, S10064-01B For MOST automotive network, 50 Mbps band POF communications L10063-01 and S10064-01B are transmitter and receiver photo ICs developed for MOST (Media Oriented System Transport) networks used in vehicles to communicate multimedia information. The transmitter photo IC L10063-01 consists of a red LED and driver IC incorporated into a clear plastic package and can be set to an operating mode that reduces the optical output level by half. The receiver photo IC S10064-01B is a monolithic photo IC fabricated by the PiN-BiP process and features a wide dynamic range. It also has a low power consumption "sleeping mode" and an optical wakeup mode triggered by input of light. Both the transmitter and receiver photo IC input or output digital signals through a TTL interface. Features Applications l Only for vehicle networks (MOST) L10063-01 l Wide operating temperature range: -40 to +105 C l DC to 50 Mbps data communications l TTL input l Optical output 50 % cut mode MOST compliant products Specifications of these products are subject to change without prior notice to keep up with changes in the MOST standard. S10064-01B l Wide operating temperature range: -40 to +105 C l 4 M to 50 Mbps data communications l Monolithic structure immune from external noise l TTL output l Wide dynamic range l Sleeping mode with optical wakeup 1 A bsolu te m axim um ratings * (Ta= -40 to +105 C ) P a ram ete r S u pp ly vo ltag e O p e rating tem pe ra tu re S to ra ge tem p eratu re S o ld e rin g S ym b ol V cc To pr Tstg Tso l L 10 0 63-0 1, S 1 00 6 4 -01B -0 .5 to + 7.0 -4 0 to +1 0 5 -4 0 to +1 2 0 2 60 C , 5 s, 3 tim es, at lea st 2.5 m m aw a y from le ad ro o t U nit V C C - S10064-01B 1 E le ctrica l a nd o ptica l ch a ra c teris tics (Ta = -40 to + 1 0 5 C , V c c= 4.75 to 5.25 V * ) P a ram ete r S ym b ol C on d itio n M in. Typ. M a x. U nit C urre n t c o n s u m p tio n 2 30 mA Ic c o * (o pe ra tion m od e ) C urre n t c o n s u m p tio n (s le e p ing m o d e ) Ic cs D a rk s ta te 20 A R ec e ive r le ve l P o p t3 B i-p h a s e s ign a l -2 5 -2 dBm H ig h leve l o utp ut vo ltage Vo h Io h = -150 m 2 .5 V c c + 0 .3 V L ow le vel o u tp u t vo lta ge Vo l Io l= 1 .6 m A 0 0 .4 V Vo u t R is e tim e tr 9 1 0 to 9 0 % * 2 , * 3 ns F a ll tim e tf 7 P u ls e w idth va ria tio n tp w v *2, *3, *4, *6 1 7.9 2 9.79 ns P u ls e w id th d is tortio n (a vera ge va lue ) ta p w d *2, *3, *4, *6 -2 .6 9 + 6.4 9 ns Operation to sleeping mode transition receivable level Psl -3 9 -2 5.5 dBm *2, *5 Sleeping mode to operation transition receivable level Pop M o de H ig h le vel vo ltage Vm h Im h = -2 0 A 4 .0 V o utpu t L ow le vel vo lta ge Vm l Im l= 0.88 m A 0 .5 V *1: A b y p a s s c a p ac ito r (0.1 F ) is c o n n e c ted b etw e e n V cc a n d G N D a t a p o sition w ith in 3 m m fro m the le a d , a n d a 1 0 F c a pac ito r is als o c on n ec te d to the p o w er sup ply lin e nea rby. Th e ce nter of the op tical fibe r is a lig ned w ith the center o f the p a ckage len s . Th e d is tan ce b etw ee n th e fib er en d a n d th e le ns to p is 0 .1 m m . *2: M e a s u re d w ith in p ut s ig n a ls c o n fo rm in g to S P 3 M O S T s p e c ific a tio n o f p h ys ic a l la yer R ev 1 .1 A dd e n d u m B . *3: M e a s u re d w ith R L = 50 k , C L = 15 p F (inclu din g paras itic c a pac ita nce s uc h as p ro be , co n nec to r and e va lua tion c irc uit b o ard p atte rn), a nd thres ho ld vo lta ge 1.5 V. *4: A n o ptica l in put w a ve fo rm is g ene ra te d w ith a H am am atsu stan da rd tran sm itter. *5: A ve ra ge o p tic al ou tp ut is m e a s ure d w ith a P O F (N A =0 .5 ). *6: M e as u re d w ith B iP ha se P R B S a t 4 5 .2 M b ps (N R Z s ign al c on ve rs io n ). N ote) * If m odu late d light a t 4 M bp s o r le ss (inclu din g D C light a nd n o ligh t in pu t) is inpu t to S 10 0 64-0 1B , th e high a nd low le ve ls c a n n o t b e d is c e rn e d . 1 Transmitter/receiver photo IC for optical link L10063-01, S10064-01B Output waveform example Mode output waveform INPUT SIGNAL DATA NO INPUT SIGNAL OPTICAL INPUT tso tos Vmh MODE OUTPUT Vml Voh OUTPUT DATA Vol OUTPUT VOLTAGE Vertical axis: 1 V/div., Horizontal axis: 5 ns/div. (Ta=25 C, Vcc=5.25 V, Pi= -26 dBm, RL=50 k, CL=15 pF, 45.2 Mbps) KPICC0095EA L10063-01 Electrical and optical characteristics (Ta= -40 to +105 C, Vcc= 4.75 to 5.25 V *7) Parameter Symbol Condition Min. Typ. Max. Unit Current consumption Icc Vin= 2.0 V, Rcont=13.5 k 40 mA Peak emission wavelength 630 650 670 nm p Spectral half width (FWHM) 20 30 nm Fiber coupled optical output 1 Po1 Rcont=13.5 k *8, *9 -9 -2 dBm Fiber coupled optical output 2 Po2 Rcont=27 k *8, *9 -12.5 -4.5 dBm Extinction ratio re 10 dB Rise time at pulse drive tr 20 to 80 % *8 6.0 ns Fall time at pulse drive tf 80 to 20 % *8 6.0 ns Pulse width variation tpwv 50 % *8, *10 19.99 24.29 ns Pulse width distortion (average value) tapwd 50 % *8, *10 -1.39 +1.39 ns *7: A bypass capacitor (0.1 F) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 F capacitor is also connected to the power supply line nearby. The center of the optical fiber is aligned with the center of the package lens. The distance between the fiber end and the lens top is 0.1 mm. *8: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B. *9: Average value measured with a plastic fiber (1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon. *10: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion). Dimensional outlines (unit: mm) S10064-01B 8.98 0.2 (INCLUDING BURR) 7.2 0.2 (INCLUDING BURR) 2.54 2.54 2.54 2.94 2.45 a a' 1.07 1.27 (4 x) 0.5 0.05 2.54 2.54 2.54 0.23 (2 x) 5 2.0 DEPTH 0.15 MAX. (4 x) 0.25 0.05 (SPECIFIED AT THE LEAD ROOT) 1.8 2.92 1.24 (SPECIFIED AT THE LEAD ROOT) 0.97 0.6 1.50 3.7 0.05 2.03 (2 x) d = 0.8 0.05 (2 x) 10 5.9 0.2 (INCLUDING BURR) 5.1 (4 x) 0.5 0.05 (18.0) 2.45 a a' 1.07 1.27 5.1 EMITTING POINT 1.57 5.92 0.66 2.03 ACTIVE AREA (18.0) 2.94 5.9 0.2 (INCLUDING BURR) 5.92 0.2 3.7 0.05 (2 x) d = 0.8 0.05 2.72 7.2 0.2 (INCLUDING BURR) 2.85 8.98 0.2 (INCLUDING BURR) (2 x) 10 L10063-01 0.05 0.05 +- 0.03 a-a' CROSS SECTION Tolerance unless otherwise noted: 0.1, 2 R0.3 MAX. Values in parentheses indicate reference value. Lead surface finish: Pd plating Shaded area indicates burr. Pin No. L10063-01 S10064-01B VIN Vcc GND GND Vcc MODEOUT Cont Vout KPICA0067EB Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2008 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KPIC1065E02 Mar. 2008 DN