50W QCW Laser Diode Array Submodule Part Number: ASM01P050 SILVER BULLET TM * Packaged Laser Diode Array * Easily Soldered to a Heat Exchanger * Available Wavelengths (785-1064nm) OPTICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS QCW Peak Power Output 65A, 150 sec, 1kHz (1) Operating Current Threshold Current Slope Efficiency Efficiency Number of Emitters Emitter Size Emitter Pitch Center Wavelength Wavelength Tolerance Spectral Width Wavelength Shift Beam Divergence FWHM (1) Polarization Degradation Rate (2) 50W 25 C 25 C 50W ------50W 50W 50W ------25 C PARAMETER Built-in Voltage Series Resistance Operating Voltage CONDITIONS 25C Heat Sink 25C Heat Sink 25C Heat Sink, 50W at 25 C Heat Sink Heat Sink Heat Sink at 25 C Heat Sink at 25 C Heat Sink at 25 C Heat Sink at 25 C Heat Sink Heat Sink MIN TYP MAX UNITS 50 --- --- W ----0.95 35 ------792 1 --0.23 ------- 55 13 1.1 40 72 90 x 1 133.3 808 3 2.0 0.25 40x10 TE 5 65 16 ----------812 4 2.5 0.27 42x12 ----- A A W/A % %/G shots MIN ------- TYP 1.6 0.008 2.0 MAX 1.7 0.012 2.3 UNITS V ohms V m m nm nm nm nm/ C x --- U.S. Patent Numbers: 5,734,672 5,913,108 NOTES (1) Lower beam divergence is also available. (2) Typical degradation rates are 5% in the first 10 million shots and 5% per billion shots thereafter. Cutting Edge Optronics * 636.916.4900 * 20 Point West Blvd. * St. Charles, MO 636.916.5665 fax * www.ceolaser.com 63301 ABSOLUTE MAXIMUM RATINGS MECHANICAL CHARACTERISTICS PARAMETER Forward Current Reverse Current Reverse Voltage Operating Temperature Range (3) Storage Temperature Range CONDITIONS 70A 25A 3V -20C to 50C -40C to 85C PARAMETER Package Length Package Width Package Height Package Weight Package Thermal Resistance DIMENSIONS 0.250 0.001 inches 0.394 0.001 inches 0.065 0.003 inches 0.6g 0.4C/W .065 [1,65] .394 [10,01] DIODE BAR .250 [6,35] ENDBLOCK .08 [2,032] SOLDER PADS FOR ELECTRICAL LEADS .15 [3,81] .12 [3] METALIZED BeO .025 [0,64] NOTES (3) A dry nitrogen environment should be provided by the user when storing and operating at temperatures below ambient dew point. INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. Diode laser Copyright (c) 2000 Cutting Edge Optronics. All Rights Reserved. Cutting Edge Optronics reserves the right to change product design and specification at any time without notice. 5W 635-1000nm CLASS IV No license is granted by implication or otherwise under any patents or patent rights of Cutting Edge Optronics or others. No responsibility is assumed for the use of these products, nor for any infringement on the rights of others resulting from the use of these products. Laser diode product components are intended for use in a userdevised end system. However, these products are capable of emitting Class IV radiation. Extreme care must be exercised during their operation. Only persons familiar with the appropriate safety precautions should operate a laser product. Directly viewing the laser beam or exposure to specular reflections must be avoided. Serious injury may result if any part of the body is exposed to the beam. The eye is extremely sensitive to the infrared radiation and therefore, proper eyewear must be worn at all times. Use of optical instruments with these products may increase eye hazard. Always wear proper eye protection when operating. REV D-10/01 Cutting Edge Optronics * 636.916.4900 * 20 Point West Blvd. * St. Charles, MO 636.916.5665 fax * www.ceolaser.com 63301