DESIGNERS AND MANUFACTURERS
RoHS COMPLIANT ~ISO 9001 CERTIFIED
®
Coin Cell Holders & Retainers
pages 2 – 7
Insulated Coin Cell Retainers
page 4
Micro Battery Retainers
page 6
THM & SMT Polarized Holders
page 20
SMT Battery Holders
page 19
UL Recognized Fuse Clips
pages 44 – 45
Battery Contacts
pages 8 – 16
SMT Auto Blade Fuse Clips & Holders
page 41
Solar Protection Fuse (SPF)
Midget Fuse Holder
page 43
SMT & THM Test Points
page 61
Color Coded and SEMS Screw Terminals
pages 62 – 65
UL Recognized Quick Fit Terminals
pages 52 –55
PC/104 - PC/104-Plus Mounting Kits
page 70
Spacers Supports & Metric Standoffs
pages 76 – 78
Vertical Card Guides
pages 117
Anti-Vibration Grommets
page 129
Adhesive Bumpers
page 130
Nylon Self-Retaining Spacers & Washers
page 75 & 131
PTFE Insulated Terminals & Pins
pages 136 – 137
Self-Retaining Mounting Spacers
for T-1 LED’s
page 91
2.0 & 3.0 USB Plugs and Sockets
pages 94 – 97
Micro Pins & Jacks
pages 98 – 101
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
A
B
C
I (cont.) P
C (cont.)
E
F
G
H
I
ADHESIVE BACKED
Bumpers . . . . . . . . . . . . . . . . . . . . 130
PCB Supports . . . . . . . . . . . . . . . . . . 78
ALLIGATOR CLIPS . . . . . . . . . . . . . . . . . 61
AUDIO JACKS . . . . . . . . . . . . . . . . . . . 108
AUTOMOTIVE BLADE
FUSE CLIPS & HOLDERS . . . . . . . 38-41
BATTERY CONTACTS & CLIPS
Clips/Accessories . . . . . . . . . . . . . 8-11
Retainers (Compact Contacts) . . . 4, 6-7
SMT (Surface Mount). . . . . . . . . . . . 7-8
Snap-On for Plastic Cases. . . . . . . . . 12
Spring . . . . . . . . . . . . . . . . 8-10, 12-16
THM (Thru Hole Mount) . . 7,9,13,29-30
BATTERY HOLDERS
Aluminum . . . . . . . . . . . . . . . 20-23, 31
Button Cell . . . . . . . . . . . . . . . . . . . 6-7
Coin Cell (Lithium). . . . . . . . . . . . . . 2-7
Contacts . . . . . . . . . . . . . . . . . . . 12-16
Covered, Plastic . . . . . . . . . . . . . . . . 27
Interconnect, Steel/Aluminum . . . . . . 21
Lithium . . . . . . . . . . . . . . . . . . . . 17-20
Lithium-Ion . . . . . . . . . . . . . . . . 17, 31
9 Volt . . . . . . . . . . . . . . . . . . 22-23, 31
Plastic . . . . . . . . . . . . 17-20, 26-27, 31
Retainers (Compact Contacts) . . . 4, 6-7
SMT (Surface Mount) . . . 2, 4-5, 17, 19
Steel . . . . . . . . . . . . . . . . 20-21, 24-25
Straps. . . . . . . . . . . . . . . . . . . . . 28-29
THM (Thru Hole Mount) . . . . . . . . . . . . .
. . . . . . . . 2-5, 7, 17-18, 20-21, 26, 31
Vertical . . . . . . . . . . . . . . . . . . . . . . 2-3
BATTERY CONTACTS LAYOUT
& MOUNTING DETAILS . . . . . . . . 32-34
BATTERY SNAPS & STRAPS 9 VOLT
Snap-On . . . . . . . . . . . . . . . . . . . 28-30
Straps. . . . . . . . . . . . . . . . . . . . . 28-29
BANANA PLUGS & JACKS . . . . . . 106-107
BINDING POSTS . . . . . . . . . . . . . . . . . 108
BOARD GUIDES, P.C. . . . . . . . . . . 116-117
BRACKETS (Mounting). . . . . . . . . 114-115
BRACKETS (Computer) . . . . . . . . 118-121
BUMBERS, Adhesive Backed . . . . . . . . 130
BUMPERS, Rubber . . . . . . . . . . . . . . . 130
BUSHINGS (Nylo/Rubber) . . . . . . 128-129
CABLE TIE ROUTING CLIP . . . . . . . . . . 127
CABLE CLAMPS. . . . . . . . . . . . . . 126-127
CABLE TIES . . . . . . . . . . . . . . . . . . . . 127
CAPS, LED LENS. . . . . . . . . . . . . . . . . . 90
CAPTIVE NUTS . . . . . . . . . . . . . . . . . . 132
CAPTIVE SCREWS . . . . . . . . . . . . . . . . . 83
CARD EJECTORS, PC . . . . . . . . . . . . . . 122
CASES (Instrumentation) . . . . . . . . . . . 85
CLIPS
Alligator . . . . . . . . . . . . . . . . . . . . . . 60
Battery . . . . . . . . . . . . . . . . . . . . . 8-11
Fuse . . . . . . . . . . . . . . . . 38-41, 44-45
COIN CELL BATTERY
Holders (Lithium). . . . . . . . . . . . . . . 2-7
COMPUTER
Card Ejectors . . . . . . . . . . . . . . . . . 122
IEEE 1394 Connectors . . . . . . . . . . . 97
Jack Screws . . . . . . . . . . . . . . . . . . . 82
PC Card Brackets . . . . . . . . . . 118-121
USB Connectors . . . . . . . . . . . . . 94-96
COMPUTER BRACKETS . . . . . . . . 118-121
Worksheet (Custom Design) . . . . . . 122
CONNECTORS
F . . . . . . . . . . . . . . . . . . . . . . . . . . 102
IEEE 1394 . . . . . . . . . . . . . . . . . . . . 97
Mounting Hardware . . . . . . . . . . . 82-84
Screw Terminals. . . . . . . . . . . . . . 62-67
USB . . . . . . . . . . . . . . . . . . . . . . 94-96
CONTACT PINS (Seamless) . . . . . . . . . 123
EYELETS . . . . . . . . . . . . . . . . . . . . . . . 134
EYELET STAKING TOOL . . . . . . . . . 134,135
FAN/FINGER GUARDS . . . . . . . . . . . 88-89
FIBER WASHERS
(Flat & Shoulder) . . . . . . . . . . 131-132
FIREWIRE PLUGS & SOCKETS . . . . . . . . 97
FUSE CLIPS & HOLDERS . . . . . . . . . 38-49
Automotive Blade . . . . . . . . . . . . 38-41
Clips . . . . . . . . . . . . . . . . 38-41, 44-45
Covers . . . . . . . . . . . . . . . . . . . . . . . 43
Holders . . . . . . . . . . . . . . . . . . . . 38-43
Midget (SPF) . . . . . . . . . . . . . . . . . . 43
Sub-Miniature. . . . . . . . . . . . . . . . . . 43
FUSE CONTACTS LAYOUT
& MOUNTING DETAILS . . . . . . . . 46-49
GROMMETS . . . . . . . . . . . . . . . . . . . . 129
GUARDS, FAN/ FINGER . . . . . . . . . . 88-89
HALOGEN LAMP SOCKET . . . . . . . . . . . 11
HANDLES, INSTRUMENT . . . . . . . . . 86-87
HARDWARE
Computer Mounting. . . . . . . . . . . . . 82-84
Handle Mounting Screws. . . . . . . . . . 87
Nuts / Machine Screws. . . . . . . . . . 133
Panel Hardware & Nuts . . . . . . . . 83-84
Transistor Mounting . . . . . . . . . 109-111
HINGED STANDOFFS. . . . . . . . . . . . . . . 75
HOLE PLUGS . . . . . . . . . . . . . . . . . . . 128
IEEE 1394 (FIRE WIRE)
PLUGS& SOCKETS . . . . . . . . . . . . . . 97
INSTRUMENTATION CASES . . . . . . . . . . 85
INSTRUMENTATION HANDLES . . . . . 86-87
INSULATED COIN CELL RETAINERS . . . . . 4
INSULATED TERMINALS . . . . . . . . 136-137
INSULATING HARDWARE . . . . . . . . . . . . . .
Bushings . . . . . . . . . . . . . . . . . . . . 128
Ceramic Standoffs . . . . . . . . . . . . . . 74
Fiber Washers. . . . . . . . . . . . . . . . . 131
Mica Insulators . . . . . . . . . . . . . . . . 109
Nylon Spacers . . . . . . . . . . . . . . . 74-75
Nylon Washers . . . . . . . . . . . . 131-132
Spacer Supports (Nylon) . . . . . . . 76-78
Phenolic Spacers . . . . . . . . . . . . . . . 74
INSTALLATION TOOLS
Eyelet . . . . . . . . . . . . . . . . . . . . . . . 134
Quick-Fit. . . . . . . . . . . . . . . . . . . 52, 57
Rivet. . . . . . . . . . . . . . . . . . . . . . . . 135
Solder Terminal. . . . . . . . . . . . . . . . 135
Staking . . . . . . . . . . . . . . . . . . . 73,135
JACKS
Audio . . . . . . . . . . . . . . . . . . . . . . . 108
Banana . . . . . . . . . . . . . . . . . . . . . 107
Insulated . . . . . . . . . . . . . . . . . . . . 105
Micro . . . . . . . . . . . . . . . . . . . . . 98-99
Phono. . . . . . . . . . . . . . . . . . . 102-103
Test . . . . . . . . . . . . . . . . . . . . . . . . 105
Tip . . . . . . . . . . . . . . . . . . . . . . . . . 104
JACK SCREWS . . . . . . . . . . . . . . . . . . . 82
KNOBS. . . . . . . . . . . . . . . . . . . . . . . . . 85
LED HOLDERS . . . . . . . . . . . . . . . . . . . 90
LED LENS CAPS . . . . . . . . . . . . . . . . . . 90
LED SPACER MOUNTS. . . . . . . . . . . . . . 91
Lugs (Solder) . . . . . . . . . . . . . . . . . . 58
MALE/FEMALE STANDOFFS . . . . . . . 70-72
Aluminum, Brass, Nylon,
Stainless Steel . . . . . . . . . . . . . . . . . 70
Metric. . . . . . . . . . . . . . . . . . . . . . . . 72
PC/104 . . . . . . . . . . . . . . . . . . . . . . 70
MICA TRANSISTOR INSULATORS . . . . . 109
MICRO JACKS . . . . . . . . . . . . . . . . . 98-99
MICRO PINS . . . . . . . . . . . . . . . . 100-101
MIDGET FUSE HOLDER . . . . . . . . . . . . . 43
MOUNTING BRACKETS. . . . . . . . . 114-115
NYLON CABLE CLAMPS. . . . . . . . . . . . 127
NYLON INSULATED
SPACER SUPPORTS . . . . . . . . . . . 76-80
NYLON SCREWS . . . . . . . . . . . . . . . . . 133
NYLON SNAP RIVETS . . . . . . . . . . . . . 134
NYLON SPACERS . . . . . . . . . . . . . . . 74-75
NYLON STANDOFFS . . . . . . . . . . . . . 70-72
NYLON WASHERS (Flat,Shoulder
& Retaining) . . . . . . . . . . . . . . 131-132
PANEL BEARINGS . . . . . . . . . . . . . . . . . 84
PANEL HARDWARE . . . . . . . . . . . . . 83-84
PHONO PLUGS & JACKS . . . . . . . 102-103
PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact (Seamless) . . . . . . . . . . . . 123
Micro . . . . . . . . . . . . . . . . . . . 100-101
Wire Wrap (.025 Square) . . . . . . . . 123
PLUGS
Banana. . . . . . . . . . . . . . . . . . 106-107
Hole . . . . . . . . . . . . . . . . . . . . . . . . 128
Shorting . . . . . . . . . . . . . . . . . . . . . 101
Solderless . . . . . . . . . . . . . . . . . . . 107
Tips & Plugs . . . . . . . . . . . . . . . . . . 104
PUSH-IN TERMINALS
Flea Clip, Imp, Micro,
Solderless, Tubular . . . . . . . . . . . . . 123
QUICK-FIT COMPONENTS . . . . . . . . . . . . .
Boots . . . . . . . . . . . . . . . . . . . . . . . . 56
Headers . . . . . . . . . . . . . . . . . . . . . . 54
PC Mount Female Terminals . . . . . . . 55
PC Mount Male Terminals . . . . . . 52-54
Rivet Mount . . . . . . . . . . . . . . . . . . . 54
Surface Mount Female Terminals. . . . 55
QUICK-FIT INSERTION TOOL. . . . . . . . . . 52
RIVETS . . . . . . . . . . . . . . . . . . . . . . . . 134
RUBBER BUMPERS & GROMMETS . . . 130
RETAINING SPACERS. . . . . . . . . . . . . . . 75
RETAINING WASHERS . . . . . . . . . . . . . 131
SCREWS
Colored Head . . . . . . . . . . . . . . . . . 133
Handle Mounting . . . . . . . . . . . . . . . 87
Jack . . . . . . . . . . . . . . . . . . . . . . . . . 82
Machine . . . . . . . . . . . . . . . . . . . . 133
Metric. . . . . . . . . . . . . . . . . . . . . . . 133
Panel . . . . . . . . . . . . . . . . . . . . . . . . 83
Self-Tapping . . . . . . . . . . . . . . . . . . 133
Shoulder . . . . . . . . . . . . . . . . . . . . . 84
Thumb . . . . . . . . . . . . . . . . . . . . . . . 83
SCREW TERMINALS . . . . . . . . . . . . . 62-67
SHAFT LOCKS / EXTENDERS . . . . . . . . . 84
SHORTING JACK . . . . . . . . . . . . . . . . . 101
SHORTING PIN . . . . . . . . . . . . . . . . . . 101
SHORTING PLUG. . . . . . . . . . . . . . . . . 101
SHOULDER SCREWS. . . . . . . . . . . . . . . 84
SMT (Surface Mount Components)
Audio Jacks . . . . . . . . . . . . . . . . . . 108
Battery Contacts . . . . . . . . . . . . . . . 6-8
Coin Cell Holders. . . . . . . . . . . . . . . 2-7
Coin Cell Retainers . . . . . . . . . . . 4, 6-7
Test Points . . . . . . . . . . . . . . . . . . . . 61
SOCKETS
Halogen . . . . . . . . . . . . . . . . . . . . . 110
IEEE 1394 . . . . . . . . . . . . . . . . . . . . 97
Micro . . . . . . . . . . . . . . . . . . . . . 98-99
L
M
N
Q
R
S
K
J
BATTERY CLIPS,
CONTACTS
& HOLDERS
PAGE 2
FUSE CLIPS
& HOLDERS
PAGE 38
TERMINALS
& TEST
POINTS
PAGE 49
SPACERS &
STANDOFFS
PAGE 70
PANEL
HARDWARE
PAGE 82
PINS, PLUGS,
JACKS &
SOCKETS
PAGE 94
PC BOARD
HARDWARE
PAGE 114
MULTI-PURPOSE
HARDWARE
PAGE 126
Phono. . . . . . . . . . . . . . . . . . . 102-103
Transistor . . . . . . . . . . . . . . . . 109-111
USB . . . . . . . . . . . . . . . . . . . . . . 94-96
SOLDER LUGS & TERMINALS . . . . . . . . 58
SOLDER TERMINALS . . . . . . . . . . 136-139
SPACERS
Aluminum, Brass, Nylon, Phenolic 74-75
LED . . . . . . . . . . . . . . . . . . . . . . . . . 91
Organizer Kits . . . . . . . . . . . . . . . . . . 79
PC Board (Snap In) . . . . . . . . . . . 76-78
SQUARE WRAP PINS (.025) . . . . . . . . 123
STAKING TOOLS. . . . . . . . . . . . . . . 73,135
STANDOFFS
Aluminum, Brass, Ceramic, Flame
Retardant, Nylon, Phenolic,
Stainless Steel . . . . . . . . . . . . . . 70-74
Hinged . . . . . . . . . . . . . . . . . . . . . . . 75
Metric. . . . . . . . . . . . . . . . . . . . . . . . 72
Organizer Kits . . . . . . . . . . . . . . . . . . 79
PC/104 . . . . . . . . . . . . . . . . . . . . . . 70
STURDI-MOUNT
QUICK-FIT TERMINALS . . . . . . . . . 52-53
TAPE & REEL COMPONENTS
Audio Jacks . . . . . . . . . . . . . . . . . . 108
Battery Contacts . . . . . . . . . . . . . . . . . 8
Coin Cell Holders. . . . . . . . . . . . . 2, 4-5
Coin Cell Retainers . . . . . . . . . . . 4, 6-7
Firewire Sockets . . . . . . . . . . . . . . . . 97
Fuse Clips . . . . . . . . . . . . . . . . . . 40-41
Fuse Holders . . . . . . . . . . . . . . . . . . 41
Test Points . . . . . . . . . . . . . . . . . . . . 61
USB Plugs & Sockets . . . . . . . . . 94-96
TERMINAL BOARDS
Military. . . . . . . . . . . . . . . . . . . . . . 141
Screw. . . . . . . . . . . . . . . . . . . . . . . 143
Scored . . . . . . . . . . . . . . . . . . . . . . 140
Turret Terminal . . . . . . . . . . . . . 140-142
Quick-Fit. . . . . . . . . . . . . . . . . . . . . 142
TERMINALS
Boards . . . . . . . . . . . . . . . . . . 140-143
Insulated . . . . . . . . . . . . . . . . 136-137
Lugs (Solder) . . . . . . . . . . . . . . . . . . 58
Male/Female, Quick-Fit . . . . . . . . 52-55
Micro . . . . . . . . . . . . . . . . . . . . . 98-99
Push In. . . . . . . . . . . . . . . . . . . . . . 123
Screw . . . . . . . . . . . . . . . . . . . . . 62-67
Solder (Standardized/Turret) . . 138-139
Solderless . . . . . . . . . . . . . . . . . . 56-57
Strips . . . . . . . . . . . . . . . . . . . . . . . 143
Sturdi-Mount, Quick-Fit . . . . . . . . 52-55
Test Points. . . . . . . . . . . . . . . . . . 59-61
TERMINAL STRIPS
Binding Post (Screw Terminal) . . . . . 143
Standard & Miniature . . . . . . . . . . . 143
TEST JACKS. . . . . . . . . . . . . . . . . 104-105
TEST POINTS
Color Keyed . . . . . . . . . . . . . . . . . . . 60
PC Mount . . . . . . . . . . . . . . . . . . 59-60
Surface Mount . . . . . . . . . . . . . . . . . 61
Ultra Low Profile . . . . . . . . . . . . . . . . 60
TEST TIPS & PLUGS. . . . . . . . . . . 104-105
THUMB SCREWS . . . . . . . . . . . . . . . . . 83
TIP JACKS . . . . . . . . . . . . . . . . . . 104-105
TRANSISTOR COVERS . . . . . . . . . . . . . 110
TRANSISTOR SOCKETS/MOUNTS . 109-111
TRANSISTOR SOCKET
MOUNTING KITS . . . . . . . . . . . 109,111
TURNABLE JACK SCREWS . . . . . . . . . . . 82
USB PLUGS & SOCKETS . . . . . . . . . 94-96
VERTICAL COIN CELL HOLDERS . . . . . . 2-3
VIBRATION (ANTI) GROMMETS. . . . . . . 129
WASHERS
Fibre (Flat & Shoulder) . . . . . . 131-132
Nylon (Flat & Shoulder). . . . . . 131-132
Retaining . . . . . . . . . . . . . . . . . . . . 131
WORKSHEETS (Custom)
Computer Brackets . . . . . . . . . . . . . 122
T
S (cont.) T (cont.)
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
W
U
V
Our battery clips, contacts and holders are designed with leading edge
technology in mind, to accommodate all major manufacturers’ batteries.
Available in a wide range of materials and mounting styles including
surface mount, thru hole and off board, some of the applications include:
•Telecommunications and Video power back-up
•Laptop and mobile computing applications
•Communication system’s power requirements
•Microcomputer and memory hold
•Preprogrammed electronic and video games
•Emergency power systems
•Industrial and commercial security and alarm systems
•Miniature battery power devices
•Computer memory, power transfer and back-up systems
•Personal medical monitoring devices
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD andother application-engineering support for modifications, special
designs or assemblyrequirements to assist you in choosing the right
Keystone product for your application.
BATTERY CLIPS, CONTACTS & HOLDERS
BATTERY CLIPS, CONTACTS & HOLDERS
1
RETAINERS
Button Cell ........................................................6
Coin Cell ..............................................................7
Negative Contacts ............................................7
CLIPS/CONTACTS
Alkaline & Lithium, Rivet ................................10
Alkaline & Lithium, PC ................................8-9
Battery Clips (no contact)..............................11
Molded Case.............................................12-16
9 Volt .............................................................30
HOLDERS
Aluminum.................................................21-23
Coin Cell ........................................................2-7
Lithium Cell.....................................................20
PC Mount .................................................18-19
Plastic....................................................26-27
Steel.......................................................24-25
9 Volt................................................................31
9 Volt Straps........................................28-29
18650 Rechargeable.......................................17
MOUNTING DETAILS..........................32-35
SECTION CONTENTS
THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS
12mm to 16mm COIN CELL HOLDERS
2
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
DESIGN ADVANTAGES…
•Reliable spring tension assures low contact resistance
•Retains battery securely to withstand shock and vibration
•Base material UL Rated 94V-0. Impervious to most industrial solvents
•Operating temperature range: -60°F to +293°F (-50°C to +145°C)
IDEALLY SUITED FOR…
•Computer memory, power transfer and back-up systems
•Video and telecommunications power back-up
•Microprocessors and Microcomputer memory hold (desktop and laptop applications)
•Industrial and commercial security and alarm systems
•PC/104 application
.048 [1.2] DIA.
x .060 [1.52] L.
.570 [14.5] .430 [10.9]
.506 [12.9]
REF.
.540 [13.7]
.748 [19.0]
.125 [3.2] TYP.
BATTERY
RELEASE
MATERIAL:
Base: High Temperature Nylon 46, UL Rated 94V-0
Contacts: .012 (.30) Phosphor Bronze, Tin Plate
Mounting Detail
Pad Layout
.156 [4.0]
.125 [3.2]
.053 [1.3] DIA.
.748
[19.0]
.121 [3.1]
.240 [6.1]
.053 [1.3] DIA.
.031 [0.79]
.047 [1.2]
DIA. (2) PLS
.240 [6.1]
.450 [11.40]
MATERIAL:
Base: High Temperature Nylon 46, UL Rated 94V-0
Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash)
.038 [.97] WIDE
PIN (2) PLS.
BATTERY
RELEASE .430 [10.9]
.507 [12.9]
REF.
.048 [1.2] DIA.
x .060 [1.52] L.
.540 [13.7]
.570 [14.5] .450 [11.4]
Tape & Reel Spec’s: 32mm wide; 20mm pitch; 13 inch reel (500 per reel)
.042 [1.1]
DIA. .055
[1.4]
DIA.
.088 [2.2] .295 [7.5]
.144
[3.6]
.102
[2.6]
.480 [12.2]
Pad Layout
MATERIAL:
Base: Glass Filled PPS. UL Rated 94V-0
Contacts: .008 (.20) Phosphor Bronze, Gold Plate (Flash)
.040 [1.0] DIA
(2) PLS.
.393
[10.0] .061 [1.5]
Mounting Detail
NEGITIVE
.062 [1.57] DIA.
LEG (3) PLS. ON
.375 [2.5] CIR. DIA.
POSITIVE
.497 [12.6] I.D.
.750 [19.1]
.196 [5.0]
.593 [15.1]
O.D.
H
.035 [0.9]
.120 [3.0] MIN.
.393
[10.0]
.036 [0.91]
DIA. LEG
.048 [1.22]
DIA. LEG
.567
[14.4]
.740
[18.8]
.512 [13.0] I.D.
.071 [1.8]
(2) PLS
.591 [15.0] DIA.
.157 [4.0]
MATERIAL:
Base: PBT, UL Rated 94V-0
Positive Contact: .015 (.38) Spring Steel, Tin-Nickel Plate
Negative Contact: .035 (.89) Dia. Steel, Tin-Nickel Plate
Tape & Reel Spec’s: 44mm wide; 24mm pitch; 13 inch reel (450 per reel)
.250 [6.4]
SQUARE ZONE
FOR OPTIONAL
ADHESIVE
1.129 [28.7] MIN.
.138 [3.51]
.111
[2.82]
Pad Layout
MATERIAL:
Base: Glass Filled LCP, UL Rated 94V-0
Contacts: .006 (.15) Phosphor Bronze, Gold Plate (Flash)
MATERIAL:
Base: PBT, UL Rated 94V-0
Contacts: .010 (.25) Steel, Tin-Nickel Plate
Battery Reference: (1) cell: BR1612, CR1616, CL1620,
CR1625, BR1632
CAT. NO. 1069
.061 [1.5]
.463
[11.8]
.040 [1.0] DIA
(2) PLS.
Mounting Detail
NEGITIVE
.062 [1.57] DIA.
LEG (3) PLS. ON
.375 [2.5] CIR. DIA.
POSITIVE
.635 [16.1] I.D.
.120 [3.0] MIN.
H
.196 [5.0]
.750 [19.0]
O.D.
.463
[11.8]
.897 [22.8]
.035 [0.9]
CAT. HEIGHT
NO. (H) CELLS BATTERY REFERENCE
500 .280 (7.1) 1BR1212, CR1216, CL1220, CR1225
501 .380 (9.7) 2BR1212, CR1216, CL1220, CR1225
CAT.
NO. CELLS BATTERY REFERENCE
503 1DL1/3N, K58L, CR1/3N
2SR44, 357, MS76, G-13, 303, V313, PX76A
CAT. NO. ON TAPE
BULK & REEL CELLS BATTERY REFERENCE
498 498TR 1DL1/3N, K58L, CR1/3N
2SR44, 357, MS76, G-13, 303, V313, PX76A
Tape & Reel Spec’s: 44mm wide; 20mm pitch; 13 inch reel (200 pieces per reel)
THRU HOLE MOUNT SURFACE MOUNT
THRU HOLE MOUNT SURFACE MOUNT
SURFACE MOUNT
THRU HOLE MOUNT
CAT. NO. ON TAPE
BULK & REEL CELLS BATTERY REFERENCE
504 504TR 1BR1625, CR1632
CAT. NO. ON TAPE
BULK & REEL CELLS BATTERY REFERENCE
1056 1056TR 1CR1220, BR1220
CAT. HEIGHT
NO. (H) CELLS BATTERY REFERENCE
502 .285 (7.3) 1CR1612, CL1616, CL1620
2CR1612
502-3 1BR1625, CR1632
.330 (8.4) 2BR1616, CR1620, CL1620
MATERIAL:
Base: Glass Filled LCP, UL Rated 94V-0
Positive Contact: .015 (.38) Spring Steel, Tin-Nickel Plate
Negative Contact: .035 (.89) Dia. Steel, Tin-Nickel Plate
.630 [16.0]
.212 [5.4]
.677 [17.2]
1.129 [28.7]
.138 [3.5]
(2) PLS
.680 [17.3]
REF.
.478 [12.1]
.050 [1.3]
.045 [1.1]
.640
[16.3]
DIA.
.270 [6.9]
.200 [5.1]
.145
[3.7] DIA.
.070
[1.8]
.832 [21.1]
.728 [18.5]
.422
[10.7]
.125
[3.2]
.047 [1.2]
.174 [4.4]
.136 [3.5]
.422 [10.7]
.136 [3.5]
(2) PLS
.060 [1.5]
(2) PLS
.478 [12.1]
+
Pad Layout
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
1/3N
12mm
16mm
16mm VERTICAL
20mm THRU-HOLE MOUNT COIN CELL HOLDERS
20mm COIN CELL HOLDERS
3
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Mounting Detail
.035 [.89] DIA.
.094 [2.4]
.787
[20.0]
Mounting Detail
.055 [1.4]
.300 [7.6]
.280 [7.1]
-
+
.094 [2.4]
DIA
.047 [1.19] DIA.
•Battery “Pop-in”from top for compact applications
•Finger pressure against leaver will release battery
•No tools required for battery changes
MATERIAL:
Contacts: .016 (.40) Phosphor Bronze, Tin Plate
Base: Nylon UL Rated 94V-0
.118 [3.0]
.295 [7.5]
.515 [13.1]
.600 [15.2]
.315 [8.0]
.060 [1.52] DIA.
.136 [3.5]DIA.
Mounting Detail
•Accepts all major manufacturers’ 20mm diameter batteries
•Molded notch prevents improper insertion of 2032 size cells
•Retains cells securely, withstands shock and vibration
•Polarity clearly marked
•Mounts securely for wave soldering
•Temperature range: -60°F to +293°F (-50°Cto+145°C)
MATERIAL:
Contacts:.016 (.40) Spring Steel, Tin-Nickel Plate
Base: PBT, UL Rated 94V-0
MATERIAL:
Contacts: .012 (.30) Spring Steel, Tin-Nickel Plate
Base: PBT, UL Rated 94V-0
•Polarized holder
•Mounts securely for wave soldering
•Reliable spring tension assures low contact resistance
•Retains 20mm batteries securely to withstand shock and vibration
•Temperature range -60°F to +293°F (-50°C to +145°C)
MATERIAL:
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Base: PBT, UL Rated 94V-0
.059 [1.50] DIA. LEG (3) PLS.
ON .730 [18.5] CIRCLE DIA.
.023 [.58]
.906 [23.0]
.122 [3.10]
.807 [20.5]
.787
[20.0]
.388 [9.85]
1.089 [27.7]
Mounting Detail
.807 [20.5]
.070 [1.78]
.050 [1.27] DIA.
+-
.060 [1.57] DIA x
.062 [1.57] L. LEG
.038 [1.0]
.875 [22.2]
.300 [7.6]
.140 [3.6]
.785 [19.9]
.670 [17.0]
.280
[7.1]
.531 [3.6]
(2) PLS
NEG
POS
1.000
[25.4]
REF.
.918 [23.3]
.238 [6.0]
.920 [23.4]
1.040 [26.4]
.150 [3.8]
.070
[1.8]
.600 [15.2]
.300 [7.6]
.515
[13.1]
.050 [1.3]
.045 [1.14]
.145 [3.7]
.795
[20.2]
DIA.
+
CAT. NO. G H L O.D. NO. OF CELLS BATTERY REFERENCE
103 .100 (2.5) .335 (8.5) 1.130 (28.7) .896 (22.8) (1) cell (any 20mm) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032
(2) 2012, (2) 2016
101 .179 (4.6) .414 (10.5) 1.130 (28.7) .896 (22.8) (1) cell (any 20mm) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032
(2) 2012, (2) 2016
106 .100 (2.5) .335 (8.5) 1.219 (31.0) 1.093 (27.8) (1) cell (any 20mm) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032
(2) 2012, (2) 2016
1026 .100 (2.5) .452 (11.5) 1.219 (31.0) 1.093 (27.8) (2) 2020, (2) 2025, (2) 2032 DL2020, CR2020, CL2025, BR2025, CR2032, CL2032
.062 [1.57] DIA.
LEG (3) PLS.
ON .750 [19.00]
CIRCLE DIA.
.050 [1.27]
.045 [1.14]
.807 [20.5]
AT TIP
.796 [20.2] I.D.
O.D.
L
H
.179 [4.6]
NEG
.250 [6.3]
+
G
•Cat. No. 101 is designed to maximize
PC Board Capacity
•Unique raised mounting design allows
components to be placed underneath
the holder
•Ideal when board space is more impor-
tant than board height; such as
PC/104 applicatons
•Advanced air-flow design enhances air circulation
around battery
•Reliable spring tension assures low contact resistance
•Unique notched slots assure quick and easy battery
insertion and replacement
•Retains battery securely to withstand shock and vibration
•PBT base material UL rated 94V-0. Impervious to most
industrial solvents
•Operating temperature range:
-60ºF to +293ºF (-50ºC to +145ºC)
CAT. NO. BATTERY REFERENCE
1065 BR2012, CR2016, DL2020, CL2025, CR2032
CAT. NO. BATTERY REFERENCE
1067 CR2016, DL2020, CL2025, CR2032
CAT. NO. BATTERY REFERENCE
1066 BR2025, CR2032
TOP LOADING
VERTICAL COMPACT
VERTICAL SLIMLINE
THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS
20mm COIN CELL HOLDERS
4
MATERIAL:
Contacts: .015 (.38) Steel
Base: High Temperature, Nylon 46, UL Rated 94V-0
D MIN.
.093
[2.36]
MIN.
.703
[17.6]
MAX.
Pad Layout
NEG
D
D
H
.896
[22.8]
.703
[17.9]
.931
[23.65]
.437
[11.1]
.125
[3.2]
Tape & Reel Spec’s: 44mm wide; 24mm pitch; 13 inch reel
(500 pieces per reel)
.102 [2.6] MIN.
.433 [11.0] X .276 [7.0]
OPTIONAL ADHESIVE
ZONE
1.154 [29.3]
.142
[3.6]
Pad Layout
MATERIAL:
Contacts: .006 (.15) Phosphor Bronze,
Gold Plate (Flash)
Base: Glass Filled LCP, UL Rated 94V-0
.200 [5.1]
1.339 [34.0]
.939 [23.9]
.093 [2.4] DIA.
BATTERY RELEASE
(2) PLS
L.532
[13.5]
H
MATERIAL: Contacts: .010 (.25) Phosphor Bronze Insulator: High Temperature, Nylon 46, UL Rated 94V-0
• Ideal for 6 volt or 3 volt applications
• Two coin cell batteries can be installed in series
• Plastic insulator prevents shorting of battery, within
the holder, when installed improperly
• Low profile
• Battery release ports for easy battery replacement
• Refer to pages 6 & 7 for a complete offering of coin
cell retainers
.200 [5.1]
SQ. MIN.
1.339 [34.0] MIN.
NEG. CONTACT (PAD)
.156 [3.96] SQ. MIN.
Pad Layout
Tin-Nickel Plate Gold Plate (Flash)
CAT. NO. ON TAPE CAT. NO. ON TAPE DH BATTERY
BULK & REEL BULK & REEL PAD SIZE HIEGHT CELLS REFERENCE
1061 1061TR 1081 1081TR .156 (4.0) (1) Cell (any 20mm) CR2012, CL2016,
1063 1063TR 1093 1093TR .278 (7.1) .290 (7.4) (2) 2012, (2) 2016 BR2020, DL2032
1062 1062TR 1082 1082TR .156 (4.0) (2) 2020, (2) 2025, (2) 2032 CR2032
1064 1064TR 1094 1094TR .278 (7.1) .391 (9.9) (3) 2012, (3) 2016
Tape & Reel Spec’s: 44mm wide; 32mm pitch; 13 inch reel (200 pieces per reel)
•Polarity clearly marked (+)
•Compatible with vacuum and mechanical pick &
place assembly systems
•Low profile for high density packaging
•Rugged construction, light weight
•SMT solder tail with “Flow-Hole” design for increased
joint strength
•Viewable solder tails assures reliable joint inspection
•Safe for all soldering & reflow operations
DESIGN ADVANTAGES…
•Reliable spring tension assures low contact
resistance
•Retains battery securely to withstand shock
and vibration
•All conductive polystyrene carrier tape meets
ANSI/EIA - 481 standard
•Base material UL Rated 94V-0. Impervious
to most industrial solvents
•Operating temperature range:
-60°F to +293°F (-50°C to +145°C)
IDEALLY SUITED FOR…
•Computer memory, power transfer and
back-up systems
•Video and telecommunications power back-up
•Microprocessors and Microcomputer memory
hold (desktop and laptop applications)
•Industrial and commercial security and
alarm systems
•Communications power sources
•PC/104 applications
•Compatible with vacuum
and mechanical pick &
place assembly systems
INSULATED RETAINERS
CAT. NO. ON TAPE
BULK & REEL BATTERY REFERENCE
1060 1060TR CR2025, DL2032 CAT.
NO. BATTERY REFERENCE
1059 CR2025, DL2032
MATERIAL:
Contacts: .006 (.15)
Phosphor Bronze, Tin Plate
Base: Glass Filled LCP,
UL Rated 94V-0
.100
[2.5]
1.060 [26.9]
.038
[0.97]
Mounting Detail
.130 [3.3]
1.060 [26.9]
.630
[16.0]
1.118 [28.4]
.866 [22.0]
.217 [5.5]
Mounting Detail
.073 [1.85]
DIA. (2) PLS
.939
[23.9]
NEG. CONTACT (PAD) *
.156 [3.96] SQ. MIN.
BATTERY RELEASE
(2) PLS.
.940 [23.9]
1.004 [25.5]
H
L
.110 [2.8]
.535 [13.6]
Tin-Nickel Plate Matte Tin Plate BATTERY REFERENCE Tin-Nickel Plate
CAT. NO. CAT. NO. ON TAPE CAT. NO. CAT. NO. ON TAPE 6 VOLT 3 VOLT CAT. NO. CAT. NO.
LOOSE* BULK & REEL LOOSE* BULK & REEL L H (2) CELLS (1) CELL L H LOOSE* BULK
3020-2 3020 3020TR 3070-2 3070 3070TR .890 (22.6) .156 (4.0) 2012, 2016 2020, 2025 .890 (22.6) .156 (4.0) 3021-2 3021
3022-2 3022 3022TR 3072-2 3072 3072TR .877 (22.3) .240 (6.1) 2020, 2025 2032 .877 (22.3) .240 (6.1) 3023-2 3023
3024-2 3024 3024TR 3074-2 3074 3074TR .877 (22.3) .295 (7.5) 2032 Not Applicable .877 (22.3) .295 (7.5) 3025-2 3025
Surface Mount Thru Hole Mount
Tape & Reel Spec’s: 56mm wide; 28mm pitch; 13 inch reel: 3020TR, 3070TR 400 pieces per reel; 3022TR, 3072TR 250 pieces per reel; 3024TR, 3074TR 250 pieces per reel
* Supplied Unassembled
•Polarized Holders
•Low Profile for high density
packaged PCB’s
•Vertical entry
1.256 [31.9]
.142 [3.6]
.866 [22.0]
1.118 [28.4]
.630
[16.0]
.217 [5.5]
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
Surface Mount Thru Hole Mount
Surface Mount
Thru Hole Mount
20mm CELLS
2025 / 2032 CELL
20mm CELLS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
23mm to 30mm COIN CELL HOLDERS
5
THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS
•Polarity clearly marked (+)
•Rugged construction, light weight
•SMT solder tail with “Flow-Hole” design for
increased joint strength
•Viewable solder tails assures reliable joint inspection
•Safe for all soldering & reflow operations
•Compatible with vacuum and mechanical pick
& place assembly systems
•Battery “Pop-in”
from Top for compact
designs
•No tools required
• Finger pressure
battery release
•Polarized holder
•Low profile for densely
packed PCB’s
•Compatible with vacuum
and mechanical pick &
place systems
•Conductive carrier tape
meets ANSA/EIA- 481
standard
NEG
.290
[7.4]
1.000
[25.4]
.931
[23.6]
.125
[3.2]
.437
[11.1]
D
D
.703
[17.9]
D MIN.
.100
[2.5]
MIN.
.703
[17.9]
Pad Layout
.055 [1.4] DIA
(2) PLS.
LC
Mounting Detail
.055 [1.4] DIA
(2) PLS.
LC
Mounting Detail
1.433 [36.4] MIN.
OPTIONAL
ADHESIVE ZONE
.138 [3.5] MIN.
.433
[11.0] .111 [2.8] MIN.
.276
[7.0]
Mounting Detail
.807
[20.5]
.070
[1.77]
.055 [1.4] DIA
(2) PLS.
Mounting Detail
.055 [1.40]
DIA. (2) PLS.
.136 [3.45] DIA.
.162
[4.2]
.405
[10.3]
.185 [4.7]
.620
[15.7]
.810
[20.6]
Mounting Detail
MATERIAL:
Contacts: .015 (.38) Steel
Base: High Temp Nylon 46, UL Rated 94V-0
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
MATERIAL:
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Base: PBT, UL Rated 94V-0
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
Mounting Detail
.055 [1.4] DIA
(2) PLS.
.807
[20.5]
CAT. NO. ON TAPE CAT. NO. ON TAPE DBATTERY
BULK & REEL BULK & REEL PAD SIZE REFERENCE
1071 1071TR 1091 1091TR .156 (4.0) CR2320, CL2325,
1073 1073TR 1083 1083TR .278 (7.1) DL2330, CR2335
Tin-Nickel Plate Gold Plate (Flash)
CAT. NO. OF BATTERY
NO. H L O.D. CELLS REFERENCE
104 .335 (8.5) 1.150 (29.2) 1.000 (25.4) (1) Cell (Any 23mm)
BR2320, CR2320,
107 .335 (8.5) 1.219 (31.0) 1.093 (27.8) (1) Cell (Any 23mm) CL2325, DL2330,
(1) 2354 CL2354, CR2335
1027 .452 (11.5) 1.219 (31.0) 1.093 (27.8) (2) 2320, (2) 2325,
(2) 2330
CAT. NO. OF BATTERY
NO. C H L CELLS REFERENCE
105 .064 (1.6) .335 (8.5) .805 (20.5) (1) 2430
1025 .074 (1.9) .452 (11.5) .805 (20.5) (1) 2450 CR2430, CL2430,
(2) 2430 BR2450, CR2477
1025-7 .074 (1.9) .503 (12.8) .805 (20.5) (1) 2477
(2) 2430
CAT. NO. ON TAPE
BULK & REEL BATTERY REFERENCE
1052 1052TR (1) CR2450
CAT. NO. BATTERY REFERENCE
1068 (1) CR2450, (1) CL2450
CAT. NO. BATTERY REFERENCE
301 BR3032
CAT. BATTERY
NO. L C REFERENCE
1053 .788 (20.0) .048 (1.2) (1) CR2450
MATERIAL:
Base: PBT, UL Rated 94V-0
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
MATERIAL:
Base: LCP, UL Rated 94V-0
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
MATERIAL:
Base: PBT, UL Rated 94V-0
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
MATERIAL:
Contacts: Phosphor Bronze, Nickel Plate
Base: High Temp Nylon 46, UL Rated 94V-0
Operating Temperature: -60°F to +293°F (-50°C to +145°C)
.187 [4.8]
.050 [1.3]
.045 [1.1]
1.219 [31.0]
.985 [24.0]
I.D.
NEG
1.093
[27.8]
H
L
.062 [1.57] DIA. LEG
(3) PL ON .750 [19.1]
CIRCLE DIA.
1.059 [26.9]
.630
[16.0]
.138 [3.5]
1.433 [36.4]
.294
[7.47]
1.292 [32.8]
.810 [20.6]
.370 [9.4]
1.027
[26.1]
1.255
[31.9]
.070
[1.8]
.232 [5.9]
1.135
[28.9]
.770
[19.6]
DIA.
.150
[3.8]
.145
[3.7] .050 [1.3]
.045 [1.1]
.620
[15.7]
1.090
[27.7]
REF.
•Polarized holder
•Mounts securely for wave soldering
•Reliable spring tension assures low
contact resistance
•Advanced air-flow design enhances
air circulation around battery
•Unique notched slots assure
quick and easy battery insertion
and replacement
NEG
.062 [1.57] DIA. LEG
(3) PL ON .953 [24.2]
CIRCLE DIA.
1.187
[30.1]
I.D.
.335 [8.5]
.050 [1.27]
.045 [1.14]
.187 [4.8]
1.425 [36.2]
1.297
[32.9]
.807 [20.5]
+
Tape & Reel Spec’s: 44mm wide; 32mm pitch; 13 inch reel, (200 pieces per reel)
Tape & Reel Spec’s: 56mm wide; 24mm pitch;
13 inch reel, (250 pieces per reel)
MATERIAL:
Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate
Base: PBT, UL Rated 94V-0
Operating Temperature: -60°F to +293°F
(-50°C to +145°C)
.062 [1.57] DIA. LEG
(3) PL ON .750 [19.1]
CIRCLE DIA.
.807
[20.5]
.050 [1.3]
.045 [1.1]
.187 [4.8]
NEG
.911 [23.1]
I.D.
O.D.
H
L
.008
[0.20]
.974 [24.8] I.D.
.425 [10.8]
.374 [9.5]
1.053
[26.8]
O.D.
.035 [.89]
.016
[0.41]
1.155 [29.4]
.150 [3.2]
MIN
L
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
Surface Mount
Thru Hole Mount
Note: All conductive polystyrene carrier tape meets ANSI/EIA - 481 standard
Thru Hole Mount
Thru Hole Mount
Surface Mount
Thru Hole Mount
23mm
24mm
24mm TOP Loading
30mm
Thru Hole Mount
.249
[6.3] .125 [3.2]
.052 [1.3] DIA.
.526 [13.4]
.346 [8.8]
STAMP (+)
AS SHOWN
.225 [5.7]
4 mm to 12 mm BUTTON CELL RETAINERS
6
THRU HOLE (THM) & SURFACE MOUNT (SMT) BUTTON CELL RETAINERS
MATERIAL: .006 (.15) Phosphor Bronze,
Gold Plate (Flash)
MATERIAL: .010 (.25) Phosphor Bronze
.062
[1.6]
DIA.
.116 [3.0]
.138 [3.5]
.634 [16.1]
.418 [10.6]
.339
[8.6]
STAMP (+)
AS SHOWN
.235
[6.0]
.520 [13.2]
.265
[6.7]
.323
[8.2]
.475
[12.1]
.062
[1.6]
.585 [14.9]
STAMP (+)
AS SHOWN
.062
[1.6]
.116 [3.0]
.180 [4.6]
.339
[8.6]
.195
[5.0]
.482
[12.2]
.418 [10.6]
STAMP (+)
AS SHOWN
• Available in Thru Hole Mount (THM) or Surface Mount
(SMT) configurations
• SMT solder tail with “flow-hole” design for increased joint strength
STAMP (+)
AS SHOWN
.315 [8.0]
.125 [3.2]
.158 [4.0]
.315
[8.0]
.215
[5.5]
.062 [1.6]
.380
[9.7]
.336
[
8.5
]
.320 [8.1]
.030 [0.8]
.346 [8.8]
.225 [5.7]
.038
[1.0]
.249 [6.3] .125 [3.2]
STAMP (+)
AS SHOWN
R.032
[R0.8]
.120 [3.0]
.315 [8.0]
.315 [8.0]
.060 [1.5]
.421 [10.7]
STAMP (+)
AS SHOWN
.157 [4.0]
.100 [2.5]
.065 [1.7]
.202 [5.1]
.315
[8.0]
STAMP (+)
AS SHOWN
.202 [5.1]
.137
[3.5]
.030
[0.8]
.116 [3.0]
.065 [1.7]
.157 [4.0]
.196
[5.0]
.038
[1.0]
STAMP (+)
AS SHOWN
CAT. NO. ON TAPE BATTERY
BULK & REEL REFERENCE
2994 2994TR ML414
CAT. BATTERY
NO. REFERENCE
2995 ML414
CAT. NO. ON TAPE
BULK & REEL FINISH BATTERY REFERENCE
2998 2998TR Tin-Nickel
3098 3098TR Matte Tin MC621, V364, SC621, DR13H, V13AT
Tape & Reel Spec’s: 16mm wide; 8mm pitch; 13 inch reel (1500 pieces per reel)
Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (1000 pieces per reel)
MATERIAL: .010 (.25)
Phosphor Bronze, Tin-Nickel Plate
MATERIAL: .010 (.25)
Phosphor Bronze, Tin-Nickel Plate
CAT. BATTERY
NO. REFERENCE
2999 MC621, V364, SC621
CAT. BATTERY
NO. REFERENCE
2989 Size 13, DA13, AZ13E
MATERIAL: .006 (.15) Phosphor Bronze,
Tin-Nickel Plate
CAT. NO. ON TAPE BATTERY
BULK & REEL FINISH REFERENCE
3030 3030TR Tin-Nickel
3050 3050TR Matte Tin CR927, CR1025
Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (1500 pieces per reel)
MATERIAL: .010 (.25) Phosphor Bronze,
Gold Plate (Flash)
CAT. NO. ON TAPE BATTERY
BULK & REEL REFERENCE
2988 2988TR Size 13, DA13, AZ13E
Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (800 pieces per reel)
MATERIAL: .006 (.15)
Phosphor Bronze, Tin-Nickel Plate
CAT. BATTERY
NO. REFERENCE
3031 CR927, CR1025
MATERIAL: .010 (.25) Phosphor Bronze, Tin-Nickel Plate
CAT.
NO. BATTERY REFERENCE
2997 SR44, LR44, 357, MS76, PX76A, G-13, 303, V313
MATERIAL: .010 (.25) Phosphor Bronze
CAT. NO. ON TAPE BATTERY
BULK & REEL FINISH REFERENCE
2996 2996TR Tin-Nickel SR44, LR44, 357, MS76,
3096 3096TR Matte Tin PX76A, G-13, 303, V313
Tape & Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel (600 pieces per reel)
Economical and reliable SMT and THM coin cell retainers specifically designed for miniature electronic applications with limited board space.
.052
[1.3]
DIA.
.125 [3.2]
.235
[6.0]
.700 [17.8]
.520 [13.2]
.475
[12.1]
.265
[6.7]
STAMP (+)
AS SHOWN
NEG. CONTACT (PAD)
.060 [1.5] SQR. MIN
.196
[5.0]
.047
[1.2]
DIA.
Mounting Detail
NEG. CONTACT (PAD)
.060 [1.5] SQR. MIN
.100 [2.5]
.060
[1.5]
.315 [8.0]
Mounting Detail
.073
[1.9]
DIA.
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
.315
[8.0]
Mounting Detail
.200
[5.1]
.070
[1.8] .440 [11.2]
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
Mounting Detail
.047 [1.2]
DIA.
.336 [5.53]
NEG. CONTACT (PAD)
.125 [3.17] SQ. MIN.
Mounting Detail
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
.138
[3.5]
.634 [16.1]
.114 [2.9]
Mounting Detail
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
.073 [1.85]
DIA. .418
[10.60]
Mounting Detail
.072
[1.8]
DIA.
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
.520
[13.2]
Mounting Detail
NEG. CONTACT (PAD)
.156 [4.0] SQR. MIN.
.125 [3.2]SQR.
.700 [17.8]
Mounting Detail
• THM legs maintain relative position during and after soldering
• Ideally suited for High Density packaging
• Reliable spring tension assures low contact resistance
• Retains battery securely to withstand shock and vibration
• Solder tail located outside of retainer body which facilitates
visual inspection of the solder joints
Surface Mount
Thru Hole Mount
Thru Hole Mount
Thru Hole Mount
Thru Hole Mount
Thru Hole Mount
Surface Mount
Surface Mount
Surface Mount
Surface Mount
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
AVAILABLE ON TAPE AND REEL
NEG. CONTACT (PAD)
.125 [3.2] SQR. MIN.
.125 [3.2]
.080 [2.0]
.526 [13.4]
Mounting Detail
4.8 mm
6.8 mm
7.9 mm
11.6 mm
9 - 10 mm
MATERIAL: .006 (.15)
Phosphor Bronze, Tin-Nickel Plate
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
12mm to 24mm COIN CELL RETAINERS
7
THRU HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL RETAINERS
Battery retainers are suited for high density PCB packaging. Engineered with reliable spring tension,
these contacts assure low resistance while firmly securing the battery within the retainer.
•Compatible with all wave and reflow operations
•Solder tails located outside of retainer body which facilitates visual inspection of the solder joints
•Flow-hole solder tail designed for increased joint strength
•Compatible with most vacuum and mechanical pick & place assembly systems
•Matte Tin Plate for lower soldering temperatures ideal where other temperature sensitive components
are being used
•Tin-Nickel plated retainers are ideal for lead free, high temperature soldering applications
•All conductive polystyrene carrier tape meets ANSI/EIA-481 standards
Mounting Detail
F MIN.
NEG. CONTACT (PAD)
.156 [3.96] SQ. MIN.
W MIN.
G MIN.
AVAILABLE ON TAPE AND REEL
NEGATIVE BATTERY CONTACTS*
L
DIA.
.062 [1.54]
.016 [.41]
.030 [.76] DIA.
.105 [2.7]
.360 [9.1]
.031 [.78] DIA
(3) PLS
.112 [2.8]
.625 [15.9]
.127 [3.2]
.062
[1.57]
MIN. SQR. L MIN.
Pad Layout
.112 [2.7]
.625 [15.9]
Pad Layout
DWG. 1 MATERIAL: .008 (.20) Brass DWG. 2 MATERIAL: .010 (.25) Phospher Bronze
SURFACE MOUNT (SMT) THRU HOLE MOUNT (THM)
B
POLARITY
MARKING
W
EH
L
A
.062 [1.6]
Mounting Detail
.073 [1.85]
DIA. (2) PLS
A
NEG. CONTACT (PAD) *
.156 [3.96] SQ. MIN.
MATERIAL:
.008 (.20) Phosphor
Bronze, Tin-Nickel Plate
.308 [7.8]
.373 [9.5]
.128 [3.3]
.062 [1.57]
.212 [5.4]
.250 [6.4] DIA.
.079
[2.01]
Mounting Detail
CAT. NO. 2990
.300 [7.6]
.073 [1.9] DIA.
(2) PLS
•Snap-In
•Assures proper
contact
SURFACE MOUNT (SMT)
THRU HOLE MOUNT (THM)
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL DWG. L DIA. TAPE & REEL SPECS
2991 2991TR 2981 2981TR 1 .368 (9.4) .250 (6.4) 16mm wide, 8mm pitch, 1500/7 reel
2992 2992TR 2982 2982TR 1 .289 (7.4) .186 (4.7) 16mm wide, 12mm pitch, 1000/7 reel
2993 2993TR 2983 2983TR 2 .625 (15.9) — 24mm wide, 16mm pitch, 1000/13 reel
*Note: Cannot be used with Cat. No. 3028, 3029, 3032, 3033.
CAT. NO. CELL
BULK A B E H L W DIA. BATTERY REFERENCE
3001 .520 (13.2) .265 (6.7) .210 (5.3) .118 (3.0) .475 (12.1) .585 (14.9) 12mm BR1216, CR1216, BR1220, CL1220, CR1220, BR1225
3013 .664 (16.9) .344 (8.7) .265 (6.7) .156 (4.0) .594 (15.1) .723 (18.4) 16mm BR1616, CR1612, CR1616, CR1620, CR1632
3029 .831 (21.1) .298 (7.6) .176 (4.5) .067 (1.7) .618 (15.7) .890 (22.6) BR2012, CR2012, DL2012
3027 .831 (21.1) .416 (10.6) .194 (4.9) .085 (2.2) .782 (19.9) .890 (22.6) 20mm BR2016, CR2016, DL2016
3003 .831 (21.1) .416 (10.6) .265 (6.7) .156 (4.0) .782 (19.9) .890 (22.6) BR2016, DL2020, CR2320, CR2025, CR2032
3005 .939 (23.9) .475 (12.1) .265 (6.7) .156 (4.0) .832 (21.1) 1.004 (25.5) BR2320, CL2330, CR2320, BR2325, CR2325, DL2325
3011 .939 (23.9) .475 (12.1) .351 (8.9) .240 (6.1) .819 (20.8) 1.004 (25.5) 23mm CR2354, DL2354
3033 1.000 (25.4) .313 (8.0) .176 (4.5) .067 (1.7) .681 (17.3) 1.055 (26.8) BR2412, CR2412
3007 1.000 (25.4) .506 (12.9) .265 (6.7) .156 (4.0) .918 (23.3) 1.055 (26.8) 24mm CR2430, DL2430
3009 1.000 (25.4) .506 (12.9) .350 (8.9) .230 (5.8) .890 (22.5) 1.059 (26.9) CR2450, DL2450
3039 1.000 (25.4) .506 (12.9) .450 (11.4) .336 (8.5) .890 (22.5) 1.059 (26.9) CR2477, DL2477
REFER TO THRU HOLE MOUNT (THM) DRAWING
MATERIAL: .010 (.25) Phosphor Bronze
TIN-NICKEL PLATE MATTE TIN PLATE
Insulated retainers available for
6 volt applicatins. See page 4.
TIN-NICKEL PLATE
•Assures proper
contact •Assures proper
contact
Thru Hole Mount
AVAILABLE ON TAPE AND REEL
FLOW HOLE/SLOT
POLARITY
MARKING
L
A
F
B
H
W
SPRING CONTACT
COMPACT
TIN-NICKEL PLATE MATTE TIN PLATE REFER TO SURFACE MOUNT (SMT) DRAWING
CAT. NO. ON TAPE CAT. NO. ON TAPE CELL BATTERY
BULK & REEL BULK & REEL AB FGH L WDIA.REFERENCE TAPE & REEL SPEC’S
3000 3000TR 3080 3080TR .520 (13.2) .265 (6.7) .125 (3.2) .125 (3.2) .125 (3.2) .475 (12.1) .745 (18.9) 12mm CR1216, BR1220, CL1225 32mm wide; 16mm pitch; 1000/reel
3012 3012TR 3092 3092TR .664 (16.9) .344 (8.7) .125 (3.2) .125 (3.2) .156 (4.0) .594 (15.1) .914 (23.2) 16mm BR1612, CR1616, CR1620, 44mm wide; 24mm pitch; 600/reel
DL1632
3028 3028TR 3038 3038TR .831 (21.1) .298 (7.6) .200 (5.1) .050 (1.3) .067 (1.7) .618 (15.7) .911 (23.1) 20mm BR2012, CR2012, DL2012 44mm wide; 24mm pitch; 1000/reel
3026 3026TR 3078 3078TR .831 (21.1) .416 (10.6) .200 (5.1) .200 (5.1) .085 (2.2) .782 (19.9) 1.210 (30.7) 20mm BR2016, CR2016, DL2016 44mm wide; 32mm pitch; 750/reel
3034 3034TR 3044 3044TR .835 (21.2) .291 (7.4) .200 (5.1) .050 (1.3) .160 (4.1) .635 (16.1) 0.915 (23.1) 20mm DL2020, CR2025, CR2032 44mm wide; 24mm pitch; 500/reel
3002 3002TR 3082 3082TR .831 (21.1) .416 (10.6) .200 (5.1) .200 (5.1) .156 (4.0) .782 (19.9) 1.210 (30.7) 20mm DL2020, CR2025, CR2032 44mm wide; 24mm pitch; 500/reel
3004 3004TR 3084 3084TR .939 (23.9) .475 (12.1) .200 (5.1) .200 (5.1) .156 (4.0) .832 (21.1) 1.339 (34.0) 23mm BR2320, CL2325, CR2330, 56mm wide; 32mm pitch; 400/reel
DL2335
3010 3010TR 3090 3090TR .939 (23.9) .475 (12.1) .200 (5.1) .200 (5.1) .240 (6.1) .819 (20.8) 1.339 (34.0) 23mm CR2354, DL2354 56mm wide; 32mm pitch; 200/reel
3032 3032TR 3042 3042TR 1.000 (25.4) .313 (8.0) .200 (5.1) .050 (1.3) .067 (1.7) .681 (17.3) 1.080 (27.4) 24mm BR2412, CR2412 44mm wide, 24mm pitch, 1000/reel
3006 3006TR 3086 3086TR 1.000 (25.4) .506 (12.9) .200 (5.1) .200 (5.1) .156 (4.0) .918 (23.3) 1.400 (35.6) 24mm CR2430, DL2430 56mm wide; 32mm pitch; 400/reel
3008 3008TR 3088 3088TR 1.000 (25.4) .506 (12.9) .200 (5.1) .200 (5.1) .230 (5.8) .890 (22.6) 1.400 (35.6) 24mm CR2450, DL2450 56mm wide; 32mm pitch; 200/reel
.047 [1.19] DIA.
.092 [2.34] DIA.
.662 [16.8]
.250 [6.4]
.050 [1.27]
.369 [9.4]
.312 [7.9]
.200 [5.1]
.092 [2.3]
.593 [15.06]
.359 [9.1]
.569 [14.4]
.156 [4.0] TYP.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.200 [5.1]
[2.34]
.040
[1.02]
.258
[6.6]
.047 [1.19] DIA.
.092 [2.34] DIA.
.156 [4.0]
.671 [17.0]
.497
[12.6]
.296
[7.5]
[6.4]
.092
.250
[6.4]
.250
.498 [12.7]
Pad Layout
.092
[2.34]
MIN.
.200 [5.1]
MIN.
.156 [4.0]
MIN. TYP.
.671 [17.0] MIN.
Pad Layout
.092
[2.34]
MIN.
.200 [5.1]
MIN.
.156 [4.0]
MIN. TYP.
.613 [15.6] MIN.
Pad Layout
.360 [9.1]
MIN. .124
[3.2]
MIN.
•“Flow-Hole” SMT solder tail design for increased joint strength
•Tin-Nickel plating is ideal for lead free, high temperature soldering
•Matte Tin Plate for lower soldering temperatures ideal where other temperature
sensitive components are being used
.055 [1.39]
.250 [6.4] .093 [2.36]
.124 [3.2]
.047
[1.19]
.187 [4.8]
.226 [5.7]
.187 [4.8]
.320 [8.1]
.192
[4.9]
.266
[6.8]
.400 [10.2]
.064 [1.63] DIA.
.320
[8.1]
Tape & Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel, (300 pieces per reel)
Tape & Reel Spec’s: 32mm wide; 20mm pitch;
13 inch reel, (250 pieces per reel)
.545
.109 [2.8]
[13.8]
.435
[11.0]
REF.
.300 [7.6]
.200
[5.1]
.098 [2.5] DIA.
.300 [7.6]
•Economical & reliable contacts are ideal for surface mount applications
•Unique spring tension contacts adjust to variations in battery length
• Reliable spring tension contacts assure low contact resistance
•SMT solder tail with “flow-hole” design for increased joint strength
Tape and Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (400 pieces per reel) Tape and Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel (250 pieces per reel)
[9.9]
.200
[5.1]
.388
.109 [2.8]
.098 [2.5] DIA.
.200 [5.1]
.270
[6.9]
REF.
.300 [7.6]
MATERIAL: .010 (.25) Spring Steel
MATERIAL: .010 (.25) Spring Steel
MATERIAL: .012 (.30) Spring Steel MATERIAL: .010 (.25) Spring Steel
MATERIAL: .010 (.25) Spring Steel MATERIAL: .010 (.25) Spring Steel
MATERIAL: .010 (.25) Spring Steel
AVAILABLE ON TAPE AND REEL
.092 [2.33]
.092 [2.34]
DIA. HOLE
.047 [1.19]
DIA. HOLE
.200 [5.1]
.250 [6.4]
.156 [3.96]
(2) PLS .613 [15.6]
.040 [1.02]
.396 [10.0]
.215 [5.48]
.250 [6.4]
.092 [.2.34]
DIA. HOLE
.466 [11.8]
.285 [7.2]
.047 [1.19]
DIA. HOLE
.200 [5.1]
.092 [2.33]
.156 [4.0]
(2) PLS
.613 [15.6]
.040 [1.02]
Pad Layout
.092
[2.34]
MIN.
.200 [5.1]
MIN.
.156 [4.0]
MIN. TYP.
.662 [16.8] MIN.
Pad Layout
.092
[2.34]
MIN.
.200 [5.1]
MIN.
.156 [4.0]
MIN. TYP.
.613 [15.6] MIN.
Tape & Reel Spec’s: 24mm wide; 16mm pitch; 13 inch reel, (500 pieces per reel)
Tape & Reel Spec’s: 32mm wide; 24mm pitch;
13 inch reel, (150 pieces per reel)
Tape & Reel Spec’s: 32mm wide; 20mm pitch;
13 inch reel, (250 pieces per reel)
AVAILABLE ON TAPE AND REEL
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
50 50TR 550 550TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
55 55TR 555 555TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
56 56TR 556 556TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
53 53TR 553 553TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
57 57TR 557 557TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
5231 5231TR 5331 5331TR
TIN-NICKEL PLATE MATTE TIN PLATE
CAT. NO. ON TAPE CAT. NO. ON TAPE
BULK & REEL BULK & REEL
5230 5230TR 5330 5330TR
SURFACE MOUNT BATTERY CLIPS/CONTACTS
SURFACE MOUNT BATTERY CLIPS & CONTACTS
8
Refer to page 32 for Battery Contact Layout & Mounting Details
SURFACE MOUNT LEAF-SPRING CONTACTS
“AAAA” • “A27”
“AAA” • “N” • “A23”
“AA” • “CR2” • “A”
“AA” • “CR2” •“A” • “9V”
“AAA” • “AAAA” • “12V” • “N”
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PC BATTERY CLIPS
P.C. BUTTON & SPRING CONTACTS
THRU HOLE MOUNT BATTERY CONTACTS
•Mounts securely to the PC board with advanced “Snap-In”
design for thru hole mounting
•Reliable spring tension assures low contact resistance
•Low profile, economical design
•Retains battery securely to withstand shock and vibration
•AAAA, AAA, AA, N, 12V, 2/3A, 17-19mm
.320 [8.1]
A
HC
.047 [1.2]
B
W
.094
[2.4]
L
.200 [5.1]
FRONT LEGS
.062 [1.6]
(3) PLS .120
[3.0]
.062
[1.6]
DIA.
.070 [1.8]
B
D
.512
[13.0]
A
W
C
H
L
.062
[1.6]
DIA.
H
.062 [1.57]
.375
[9.5]
B
D
A
.155 [3.9]
L
C
W
MATERIAL:
Frame: .015 (.38)
Steel, Tin-Nickel Plate
MATERIAL:
Frame: .015 (.38) Steel,
Tin-Nickel Plate
MATERIAL:
Frame: .015 (.38) Steel,
Matte Tin Plate
MATERIAL:
Frame: .015 (.38)
Steel,Matte Tin Plate
MATERIAL: .012 (.30) Spring Steel, Tin-Nickel Plate
.410 [10.4]
.180 [4.6]
.190 [4.8]
.100 [2.5]
(3) PLS
.380 [9.7]
.015 [0.4]
.265
[6.7]
.175
[4.5]
DIA.
.190 [4.8]
.100 [2.5]
(3) PLS
.410
[10.4]
.290
[7.4]
.380 [9.7]
.180 [4.6]
.265 [6.7]
.210
[5.3]
DIA.
.015 [0.4] .380 [9.7]
.062
[1.6]
(3) PLS
.550 [14.0]
.156
[4.0]
.120 [3.0]
.350 [8.9]
.550
[14.0]
.120 [3.0]
.350 [8.9]
.338
[8.6]
.290
[7.4]
.156 [4.0]
.055 [1.4]
(3) PLS
.160 [4.1]
REF.
.200 [5.1]
.450 [11.4]
.360
[9.1]
.250
[6.3]
.416
[10.6]
REF.
.325 [8.2]
REF.
.045 [1.1]
.250
[6.4]
DIA.
.360
[9.1]
.416
[10.6]
REF.
.045 [1.1]
.150 [3.8]
.275 [7.0]
.015 [0.4]
.450 [11.4]
.250
[6.3]
(+) POSITIVE BUTTON (+) POSITIVE BUTTON
MATERIAL: .010 (.25) Spring Steel, Tin-Nickel Plate
.232
[5.9]
DIA.
.416
[10.6]
REF.
.360
[9.1]
.350 [8.9]
.045 [1.1]
.150 [3.8]
.015 [0.4]
.200 [5.1]
.250
[6.3]
.350 [8.9]
.160 [4.1]
REF.
.150 [3.8]
.416
[10.6]
REF.
.045 [1.1]
.360 [9.1]
.200 [5.1]
.250
[6.3]
.202 [5.1]
REF.
(-) NEGATIVE SPRING (-) NEGATIVE SPRING
CAT. NO. 595 CAT. NO. 628 CAT. NO. 637 CAT. NO. 629
CAT. NO. 591CAT. NO. 597CAT. NO. 590CAT. NO. 596
“CR2” • “AA”
COIL SPRING
LEAF SPRING
9
CAT. BATTERY BATTERY MATERIAL
NO. FIG. SIZE DIAMETER A B C D H L W THICKNESS
51 1“AAAA” • “A27” .300 -.350 (7.6-8.9) .187 (4.8) .187 (4.8) .194 (4.9) — .320 (8.1) .214 (5.4) .226 (5.7) .010 (.25)
82 2“AAA”•“N” • “A23” .375-.460 (9.5-11.7) .250 (6.4) .250 (6.4) .280 (7.1) .040 (1.0) .498 (12.7) .228 (5.8) .296 (7.5) .010 (.25)
52 2“AA” •“CR2” No Ears .250 (6.4) — .280 (7.1) .032 (0.8) .498 (12.7) .228 (5.8) .250 (6.4) .010 (.25)
92 2“AA” • “CR2” .531-.665 (13.5-16.9) .312 (7.9) .250 (6.4) .359 (9.1) .050 (1.3) .593 (15.1) .228 (5.8) .369 (9.4) .012 (.30)
2915 2“AA” • “CR2” .531-.665 (13.5-16.9) .312 (7.9) .250 (6.4) .359 (9.1) .050 (1.3) .593 (15.1) .228 (5.8) .376 (9.5) .015 (.38)
54 3“A” • 17-19mm* .669-.748 (17.0-19.0) .350 (8.9) .375 (9.5) .385 (9.8) .062 (1.6) .653 (16.6) .300 (7.6) .438 (11.1) .012 (.30)
*Battery Reference: 2/3A,17335,17450,17500,17650,18500,18650 cells
MATERIAL: Spring Steel, Tin-Nickel Plate
•Space saving design installs directly onto the PC board
•Suitable for .062 (1.57) to .093 (2.36) PC boards
•Reliable spring tension assures low contact resistance
•Ideal for self-contained battery compartments
FIG. 1 FIG. 2 FIG. 3
Refer to page 33 for Battery Contact Layout & Mounting Details
*17335, 17450, 17500, 17650, 18600, 18650 cells
“AAA” • “N” • “A23” • “AA” • “CR2”
“AAA” • “AA” • “N” • “A23”
“AAA” • “N” • “A23”
“AA” • “CR2” • “A”
“A” • 17–19mm*
“AAAA” • “A27”
INSULATED POLARIZING WASHERS
BATTERY SPRING CONTACTS
POLARITY INDICATING LABEL
BATTERY CLIPS, CONTACTS & ACCESSORIES
10
SPECIFICATIONS Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate
Insulating Washers: Moisture Proof, Resin Impregnated Fibre Solder Lugs: Brass, Tin Plate
B
DF
JG
H
M
.050
[1.27]
.093 [2.4]
.144 [3.7]
DIA.
.098 [2.5]
DIA. (2) PLS
.437 [11.1]
EAR FOR SOLDERING
RUGGED STEEL BATTERY CLIPS
DWG. 1
Non-Insulated Contact
D
G
H
J
F
BM
.437 [11.1]
.093 [2.36]
.070
[1.78]
SOLDER LUG
.098 [2.5]
DIA. (2) PLS
.144 [3.7]
DIA.
DWG. 2
Insulated Contact
Easy to assemble with eyelets or rivets. Refer to page 142.
(FRONT) CONTACT (BACK) CONTACT
B
C
HA
Prevents improper connection of battery which may cause
damage to electronic equipment. Washers hold securely when
snapped over eyelets. Used on our standardized battery holders.
For “AA”, “C” & “D” cells.
MATERIAL: Molded Polyethylene
MATERIAL: .016 (.41) Spring Steel, Nickel Plate
•No Gluing or Wetting Needed •Economical
•Pressure Sensitive Adhesive Back •Adheres To All Surfaces
Recommended where proper polarity of battery insertion or circuit polarity is to be
shown. Labels are two color, (+) positive side red; arrow, (-) negative side blue.
CAT. CELL
NO. H A B C MATERIAL SIZE
211 .290 (7.4) .335 (8.5) .100 (2.5) .140 (3.6) .025 (.64) Dia. Spring Steel, “2/3 A” • “AA”
Nickel Plate
211-D .850 (21.6) .650 (16.5) .162 (4.1) .300 (7.6) .040 (1.0) Dia. Spring Steel, “C” • “D”
Nickel Plate
• Available with insulated or non-insulated contact. Positive contact grips battery securely.
1.375 [34.9]
.250 [6.4]
CAT. NO. 58
CAT. NO. 59 (RED) CAT. NO. 60 (BLACK)
86
89
99
87
88
100
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
ECONOMY CONTACTS
H
B
C
M
.375 [9.5]
.120 [3.0]
.375 [9.5]
ANTI-ROTATION TAB
.062 [1.57]
DIA. .050
[1.27] •Designed for mounting in self-contained, non-metallic
battery compartments.
•Reliable spring tension assures low contact resistance.
•Recessed contact holds battery in place.
•All clips have anti-rotation tab.
CAT. FIG. M CELL
NO. NO. B C H MTG. HOLE SIZE
206 1 .625 (15.9) .480 (12.2) .500 (12.7) .128 (3.3) “AA”
207 2 .687 (17.4) .547 (13.9) .875 (22.2) .128 (3.3) “C“
208 2 .750 (19.1) .562 (14.3) 1.260 (32.0) .128 (3.3) “D”
B
C
H
M
.687 [17.5]
.375 [9.5]
.050
[1.27]
.120 [3.1]
ANTI-ROTATION TAB
Refer to page 32 for Battery Contact Layout & Mounting Details
Refer to page 32 for Battery Contact Layout & Mounting Details
FIG. 1
FIG. 2
CAT. DWG. STEEL BATTERY DIAMETER CELL
NO. NO. B D F G H J M THICKNESS MIN. - MAX. SIZE
86 1.703 (17.9) .812 (20.6) .593 (15.1) .375 (9.5) .937 (23.8) .500 (12.7) .605 (15.4) .020 (.51) .875 to 1.125 (22.2 to 28.6)
87 2“C”
88 2.775 (19.7) 1.075 (27.3) .750 (19.1) .437 (11.1) 1.187 (30.1) .500 (12.7) .609 (15.5) .020 (.51) 1.187 to 1.350 (30.1 to 34.3)
89 1“D”
99 1.703 (17.9) .609 (15.5) .375 (9.5) .375 (9.5) .609 (15.5) .312 (7.9) .353 (9.0) .015 (.39) .531 to .650 (13.5 to 16.5)
100 2“AA”
“AA” • “C” • “D”
“AA” • “C” • “D”
“2/3A” • “AA” • “C” • “D”
ALUMINUM & STEEL CLIPS
BATTERY & COMPONENT CLIPS
11
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Precision made spring clips are available in a wide range of sizes. These clips will hold round, square and
rectangular batteries or components with similar dimensions. Clips are manufactured from Aluminum or
Spring Steel.
80
95
97
98
217
218
219
220
221
90
91
93
222 78
94
.437
[11.1]
H
W
L
M
DIA.
L
H
W
M
DIA.
L
.437
[11.1
]
H
W
M
DIA.
L
.437
[11.1]
H
.625
[15.9]
W
M
DIA.
W
H
.437
[11.1]
L
M
1.125
[28.6]
DIA.
DWG. 1 DWG. 2 DWG. 3 DWG. 4 DWG. 5
67 69 70 71 79
BATTERY RETAINER CLIPS
•Prevents battery from loosening in
battery holder
•Retainer clip slips on the ears of
the battery holder clip
Used with Keystone Battery Clips
Cat. No. 91, 92, 95, 99, 100 and 2915.
Used with Keystone Battery Clips
Cat. No. 86, 87, 93 and 222.
Used with Keystone
Battery Clips Cat. No. 88, 89 and 94.
MATERIAL: Stainless Steel MATERIAL: Spring Steel, Nickel Plate MATERIAL: Spring Steel, Nickel Plate
CAT. NO. 61 CAT. NO. 62 CAT. NO. 63
CAT. DWG.
NO. NO. REF: CELL SIZE/BATTERTY DIA. (SQ.) H L W M MATERIAL
“AAA” CELL
90 1 .375 to .468 (9.5 to 11.9) .453 (11.5) .312 (7.9) .625 (15.9) .098 (2.5) .020 (.51) Alum.
“AA”, “CR2” CELL
91 1.531 to .656 (13.5 to 16.7) .562 (14.3) .406 (10.3) .625 (15.9) .098 (2.5) .020 (.51) Alum.
69 4 .562 (14.3) 1.125 (28.6) .625 (15.9) .098 (2.5) .015 (.39) Steel
“C” CELL
222 1 .921 (23.4) .937 (23.8) .625 (15.9) .098 (2.5) .020 (.51) Steel
93 1 .875 to 1.125 (22.2 to 28.6) .921 (23.4) .937 (23.8) .625 (15.9) .098 (2.5) .020 (.51) Alum.
97* 5 1.125 (28.6) 2.062 (52.4) .625 (15.9) .098 (2.5) .020 (.51) Alum.
“D” CELL
94 3 1.218 (30.9) 1.250 (31.8) .625 (15.9) .098 (2.5) .032 (.81) Alum.
78 2 1.187 to 1.375 (30.1 to 34.9) 1.218 (30.9) .562 (14.3) .500 (12.7) .136 (3.5) .020 (.51) Steel
98 5 1.437 (36.5) 2.656 (67.5) 1.000 (25.4) .098 (2.5) .032 (.81) Alum.
“A”, “2/3A” CELL
70 4 .656 to .690 (16.7 to 17.0) .740 (18.8) 1.343 (34.1) .625 (15.9) .098 (2.5) .025 (.64) Alum.
“9” VOLT CELL
71 3 .593 (15.1) 1.031 (26.2) .687 (17.4) 1.031 (26.2) .625 (15.9) .098 (2.5) .015 (.39) Steel
79 4 .650 (16.5) 1.043 (26.5) .765 (19.4) 1.050 (26.7) .625 (15.9) .098 (2.5) .015 (.39) Steel
66 3 .689 (17.5) 1.043 (26.5) .825 (21.0) 1.069 (27.2) .625 (15.9) .098 (2.5) .015 (.39) Steel
80 3 .650 (16.5) 1.043 (26.5) 1.187 (30.1) .675 (17.1) .625 (15.9) .098 (2.5) .015 (.39) Steel
95 3 .650 (16.5) 1.043 (26.5) 1.125 (28.6) .656 (16.7) .625 (15.9) .098 (2.5) .020 (.51) Alum.
“NiCd” CELL
217 2 1.375 to 1.500 (34.9 to 38.1) 1.430 (36.3) 1.218 (30.9) .812 (20.6) .157 (4.0) .025 (.64) Steel
218 2 1.437 to 1.687 (36.5 to 42.8) 1.531 (38.9) 1.375 (34.9) .812 (20.6) .157 (4.0) .025 (.64) Steel
219 2 2.000 to 2.500 (50.8 to 63.5) 2.156 (54.8) 1.687 (42.8) .812 (20.6) .157 (4.0) .025 (.64) Steel
“SUB-C” CELL
221 2 .859 to .890 (21.8 to 22.6) .906 (23.0) .828 (21) .468 (11.9) .157 (4.0) .020 (.51) Steel
MATERIAL: Steel Clips: Spring Steel, Nickel Plate Aluminum Clips: 2024-T3
*ONLY TWO MOUNTING HOLES
“AA” • “CR2” “C” “D”
BATTERY CONTACTS FOR MOLDED CASES
12
SNAP-ON CONTACTS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Economical and reliable contacts are ideal for molded cases with self contained battery compartments
•Solder “ear” to facilitate soldering of wire lead
•Unique spring tension contact adjusts to variations in battery length
•Reliable spring tension contacts assure low contact resistance
•Clips easily onto .060 (1.52) to .070 (1.78) wall
•Sharp barbs securely anchor contact in place
MATERIAL: .010 (.25) Spring Steel, Nickel Plate
MATERIAL:.010 (.25) Spring Steel, Nickel Plate
MATERIAL: .010 (.25) Spring Steel, Nickel Plate
MATERIAL: .010 (.25) Spring Steel, Nickel Plate
MATERIAL: .010 (.25) Spring Steel, Nickel Plate
MATERIAL:.010 (.25) Spring Steel, Nickel Plate
CAT. NO. 204 CAT. NO. 238
CAT. NO. 202 CAT. NO. 294
.358
[9.1]
.322
[8.2]
.062
[1.57]
.250
[6.4]
.187
[4.6]
REF.
.187
[4.8]
.109 [2.8]
Refer to page 34 for Battery Contact Layout & Mounting Details
.234
[5.9]
.187 [4.8]
DIA.
.125 [3.2]
DIA.
.180
[4.6]
.047
[1.19]
.281 [7.1]
REF.
.011 [.29]
.338
[8.6]
.250 [6.4] TYP.
.410 [10.4]
.358
[9.1]
.660 [16.8]
.358
[9.1]
.341
[8.7]
.187 [4.8]
REF.
.302
[7.7]
.180
[4.6]
.021 [.53]
.125 [3.18] DIA.
.187 [4.76] DIA.
.410 [10.4]
.300 [7.6]
.660 [16.8]
.338
[8.6]
CAT. NO. 295 CAT. NO. 296
.250 [6.4] TYP.
.410 [10.4]
.660 [16.8]
.358
[9.1]
.341
[8.7]
.021 [.53]
.180
[4.6]
.187 [4.8]
REF. .410 [10.4]
.341
[8.7]
.180
[4.6]
.660 [16.8]
.250 [6.4] TYP.
.021 [.53]
.187 [4.8]
REF.
.358
[9.1]
MATERIAL: 012 (.30) Spring Steel, Nickel Plate
CAT. NO. 209
CAT. NO. 292
CAT. NO. 228
CAT. NO. 291 Right
MATERIAL: 010 (.25) Spring Steel, Nickel Plate
MATERIAL: 010 (.25) Spring Steel, Nickel Plate
CAT. NO. 290 Left (shown) MATERIAL: 012 (.30) Spring Steel, Nickel Plate
MATERIAL: .012 (.30) Spring Steel, Nickel Plate
CAT. NO. 288 MATERIAL: 012 (.30) Spring Steel, Nickel Plate
CAT. NO. 210
•The (2) two leaf contacts are held together by a web.
This design offers greater stability.
.476
[12.1]
.250
[6.4]
.062 [1.6]
.312
[7.9]
.254
[6.5]
REF.
.150 [3.8] DIA.
.820 [20.8]
.450
[11.4]
.240
[6.1]
.035 [.89]
.375 [9.5]
REF.
.570 [14.5]
.370
[9.4]
.250
[6.3]
.820 [20.8]
.250
[6.3]
.570 [14.5]
.175 [4.4] DIA.
.027 [0.7]
.449
[11.4]
.250
[6.4]
REF.
.256
[6.5]
.240 [6.1]
.254
[6.5]
REF.
.250
[6.3]
.250
[6.3]
.820 [20.8]
.570 [14.5]
.055 [1.4]
.256
[6.5]
.461
[11.7]
.062 [1.57]
.375 [9.5]
REF
.025 [0.6]
.450
[11.4]
.240
[6.1]
.175 [4.4]
DIA.
.312
[7.9]
.250
[6.3]
.250
[6.3]
.820 [20.8]
.570 [14.5]
.254
[6.5]
REF.
.055 [1.4]
.256
[6.5]
.461
[11.7]
•The (2) two leaf contacts are separate, allowing a
divider between the batteries.
“AAA” • “AAAA” • “N” • “12V”
“AA” • “CR2” • “A”
“AA”
.079 [2.01]
DIA.
.300 [7.6]
MIN.
.197 [5.0]
.276
[7.0]
.827
[21.0]
.428
[10.9]
REF.
.611
[15.5]
.062 [1.6]
.394 [10.0]
.276 [7.0]
.060 [1.5]
.944 [24.0]
.826 [21.0]
.551
[14.0] .335
[8.5]
.062 [1.6]
.394
[10.0]
.428
[10.9]
REF.
.276 [7.0]
(2) PLS
.060 [1.52] DIA.
.300
[7.6]
SLIDE-IN MOUNT CONTACTS
MATERIAL: .012 (.30) Phosphor Bronze, Nickel Plate MATERIAL: .012 (.30) Phosphor Bronze, Nickel Plate
•Economical and reliable contacts are ideal for molded cases with
self contained battery compartments
•Solder “ear” to faciltate soldering of wire lead
•Unique spring tension contact adjusts to variations in battery lengths
•Reliable spring tension contacts assure low contact resistance
•Clips easily onto .060 (1.52) to .070 (1.78) wall
•Sharp barbs securely anchor contact
BATTERY CONTACTS FOR MOLDED CASES
Refer to page 34 for Battery Contact Layout & Mounting Details
CAT. NO. 5209 CAT. NO. 5208
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
13
SERRATED SURFACE
.048
[1.2]
.200 [5.08]
REF.
.500
[12.7]
REF.
.437
[11.1]
.300 [7.6]
.500
[12.7]
REF.
.300
[7.6]
.875 [22.2] .200 [5.1]
REF.
SERRATED SURFACE
.437
[11.1]
.048
[1.2]
MATERIAL: .012 (.30) Spring Steel, Nickel Plate MATERIAL: .012 (.30) Spring Steel, Nickel Plate
CAT. NO. 5205 CAT. NO. 5206
•Press fit into housing groove.
SLIDE-IN P.C. MOUNT CONTACTS
•Economical and reliable contacts
•Designed for direct placement onto PCB, no wire leads required
•Unique spring tension adjusts to variations in battery length
•Reliable spring tension assure low contact resistance and dependable connection
•Symmetrical design allows these contacts to function both as a positive and
negative contacts
MATERIAL:.008 (.20) Spring Steel,
Nickel plate
CAT. NO. 230-1
•“Off-Board” edge mounting design
frees up valuable board space
MATERIAL:.012 (.30) Spring Steel,
Nickel plate
CAT. NO. 1021-1 CAT. NO. 1017-1
MATERIAL:.012 (.30) Stainless
Steel, Tin-Nickel plate
CAT. NO. 108-2
•Made from corrosion resistant
Stainless Steel
.170 [4.3]
.220
[5.6]
.265 [6.7]
.030
[.76]
.038 [.97]
.187 [4.7]
.250
[6.4]
.405
[10.3]
.156
[4.0]
.200
[5.1]
.100 [2.5]
.050 [1.26]
.150 [3.8]
.528 [13.4]
.055 [1.39]
(2) PLS
.025 [0.64]
.120 [3.1]
L
.500 [12.7]
.300 [7.6]
.050 [1.27]
.045 [1.14]
.466
[11.8]
.334
[8.5]
.187 [4.8]
REF.
.110
[2.8]
CAT. NO. (L) Length
109-2 .840 (21.3)
109-3 1.000 (25.4)
.030 [.76]
.038 [.97]
.545
[13.8]
.170 [4.3]
.156 [4.0]
.300 [7.6]
.250
[6.3]
.250
[6.4]
.720
[18.3]
.100 [2.5]
.156
[4.0]
REF.
.200
[5.1]
.030 [0.76]
.350
[8.9]
.550
[14.0]
.038 [0.97]
.150 [3.8]
.343 [8.7]
MATERIAL:.012 (.30) Phosphor Bronze, Tin-Nickel plate
“AA”
“AA” • “CR2” • “A” • “9V”
“AAA” • “AAAA” • “N” • “12V” UNIVERSAL BATTERY SIZES
SPRING & BUTTON CONTACTS
MATERIAL:
Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate
•Economical and reliable contacts are ideal for molded cases with self
contained battery compartments
•“Solder tab” design for either wire lead or PC mounting
•Unique spring contacts adjust to variations in battery lengths
•Reliable spring contacts assure low contact resistance and a
dependable connection
•Space saving, economical, excellent mechanical construction
.228
[5.8]
.425 [10.8]
.445
[11.3]
.061
[1.55]
.050
[1.27]
.236
[6.0]
.062 [1.57] DIA.
.055
[1.40]
DIA.
.280
[7.1]
.098 [2.5] DIA.
(2) PLS
.500
[12.7]
.100 [2.5]
(2) PLS
.551 [14.0]
.970 [24.6]
.250
[6.4]
.250
[6.4]
.970 [24.6]
.551 [14.0]
.140 [3.6]
.414 [10.5]
.500
[12.7]
.098 [2.5] DIA.
Refer to page 35 for Battery Contact Layout & Mounting Details
(+) POSITIVE BUTTON
DUAL SPRING CONTACTDUAL BUTTON CONTACT
(-) NEGATIVE SPRING
.228
[5.8]
.425 [10.8]
.445
[11.3]
.334
[8.5]
.061
[1.55]
.050
[1.27]
.062 [1.57] DIA.
.055
[1.40]
DIA.
CAT. NO. 5224 CAT. NO. 5202
CAT. NO. 5228CAT. NO. 5227
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
BATTERY CONTACTS FOR MOLDED CASES
14
.049
[1.24]
DIA.
.055 [1.40] DIA.
DIMPLE
.055
[1.40]
.295
[7.5]
.157
[4.0]
.043
[1.09]
.315
[8.0]
.315
[8.0]
(-) NEGATIVE SPRING
CAT. NO. 5203
(+) POSITIVE BUTTON WITH TAB
CAT. NO. 5226
.051 [1.30] DIA.
.062 [1.57] DIA.
.669
[17.0]
.197
[5.0]
.118 [3.0]
.059 [1.50]
.362 [9.2]
.409
[10.4]
.032
[0.81]
.217
[5.5]
.049
[1.24]
DIA.
.055
[1.40] .055 [1.40] DIA.
DIMPLE
.125
[3.2]
.157
[4.0]
.043
[1.09]
.315
[8.0]
.315
[8.0]
(+) POSITIVE BUTTON
CAT. NO. 5225
.827 [21.0]
.433
[11.0]
.295
[7.5]
.453 [11.5]
.378 [9.6]
(2) PLS
.070 [1.78] .177 [4.5]
(2) PLS
.059
[1.50]
.276
[7.01]
.295
[7.5]
DUAL CONTACT (RIGHT)
CAT. NO. 5213
.062 [1.57] DIA.
.051 [1.30] DIA.
.118 [3.0]
.032
[0.81]
.409
[10.4]
.059 [1.50]
.362 [9.2] .334
[8.5]
.217
[5.5] .669
[17.0]
(-) NEGATIVE SPRING WITH TAB
CAT. NO. 5204
.295
[7.5]
.276
[7.0]
.059 [1.50]
.177 [4.5]
(2) PLS .070 [1.78]
.378 [9.6]
(
2
)
PLS
.453 [11.5]
.295
[7.5]
.433
[11.0]
.827 [21.0]
DUAL CONTACT (LEFT)
CAT. NO. 5214
“AAA” • “AAAA” • “N” • “12V”
“AA” • “CR2” • “A”
“AA”
SPRING & BUTTON CONTACTS
MATERIAL:
Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate
.250
[6.4]
.098 [2.5] DIA.
.970 [24.6]
.551 [14.0] .414 [10.5]
.500
[12.7]
.140 [3.6]
.280
[7.1]
DIA.
.057 [1.4]
.055
[1.40]
DIA. .500
[12.7]
.425
[10.8]
.062 [1.57] DIA.
.250
[6.4]
.062 [1.57] DIA.
.055
[1.4]
DIA.
.425
[10.8]
.250
[6.4]
.414
[10.5]
.500
[12.7]
.906 [23.0]
.551 [14.0]
.295
[7.5]
.472
[12.0]
.157 [4.0]
.728
[18.5]
.414 [10.5]
.067 [1.70]
DIA.
.079 [2.00] DIA.
.236
[6.0]
DIA.
.057 [1.4]
.722
[18.3]
.275
[7.0]
.118
[3.0]
.472
[12.0]
.441
[11.2]
.067 [1.70] DIA.
.060 [1.52] DIA.
.060 [1.52] DIA.
.472
[12.0]
.414
[10.5]
.722
[18.3]
.118
[3.0]
.441
[11.2]
.275
[7.0]
.067 [1.70] DIA.
.470
[11.9]
.414 [10.52]
.728
[18.5]
.067 [1.70] DIA.
.079 [2.00] DIA.
.295
[7.5]
.157 [4.0]
.551 [14.0]
.970 [24.6]
.472
[12.0]
.236
[6.0]
DIA.
.441
[11.2]
.057 [1.4]
.275
[7.0]
.118
[3.0]
.722
[18.3]
.067 [1.70] DIA.
.060 [1.52] DIA.
.414
[10.5]
.441
[11.2]
.472
[12.0]
.118
[3.0]
.275
[7.0] [18.3]
.722
.067 [1.70] DIA.
.060 [1.52] DIA.
BATTERY CONTACTS FOR MOLDED CASES
Refer to page 35 for Battery Contact Layout & Mounting Details
(-) NEGATIVE SPRING (+) POSITIVE BUTTON DUAL CONTACT (“AA” ONLY)
DUAL CONTACT (“AA” ONLY)
(-) NEGATIVE SPRING WITH TAB (+) POSITIVE BUTTON WITH TAB
DUAL CONTACT WITH TAB (“AA” ONLY)
(-) NEGATIVE SPRING WITH TAB/LANCE (+) POSITIVE BUTTON WITH TAB/LANCE
CAT. NO. 5222 CAT. NO. 5221
CAT. NO. 5201 CAT. NO. 5223
CAT. NO. 5220 CAT. NO. 5219
CAT. NO. 5218 Left
CAT. NO. 521O Left
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
15
CAT. NO. 5212 Left or Right
CAT. NO. 5211 Right (Shown)
•Economical and reliable contacts are ideal for molded cases with
self contained battery compartments
•“Solder tab” design for either wire lead or PC mounting
•Unique spring contacts adjust to variations in battery lengths
•Reliable spring contacts assure low contact resistance and
a dependable connection
•Space saving, economical, excellent mechanical construction
CAT. NO. 5217 Right (Shown)
“AA” • “CR2” • “A”
SPRING & BUTTON CONTACTS
MATERIAL:
Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate
•Economical and reliable contacts are ideal for molded cases with self
contained battery compartments
•”Solder tab” design for either wire lead or PC mounting
•Unique spring contacts adjust to variations in battery lengths
•Reliable spring contacts assure low contact resistance and a
dependable connection
•Space saving, economical, excellent mechanical construction
.061
[1.55]
DIA. .750
[19.0]
.750 [19.0] .062 [1.57]
.062 [1.57]
DIA.
.433
[11.0]
.061
[1.55]
DIA.
.750 [19.0]
.062 [1.57]
DIA.
.750
[19.0]
.646 [16.41
.413
[10.5]
1.319 [33.5]
.847 [21.5]
1.087
[27.6]
2.224 [56.5]
.392
[10.0]
.610 [15.5]
R.492 [R12.5]
.157 [4.0]
.059 [1.50] DIA
.905
[23.0]
.728 [18.5]
.165 [4.2]
.295
[7.5]
.059 [1.50]
1.260
[32.0]
.165 [4.2]
.059 [1.50] DIA
.157 [4.0]
.905
[23.0]
.394
[10.0]
.610 [15.5]
R.492 [R12.5]
.728 [18.5] .847 [21.50]
.059 [1.50]
1.260
[32.0]
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
Refer to page 35 for Battery Contact Layout & Mounting Details
(+) POSITIVE BUTTON
(+) POSITIVE BUTTON
DUAL CONTACT
DUAL CONTACT
(-) NEGATIVE SPRING
(-) NEGATIVE SPRING
.375
[9.5]
.098 [2.5] DIA.
.646
[16.4]
1.654 [42.0]
.750
[19.0]
.984 [25.0]
CAT. NO. 5240 CAT. NO. 5241
CAT. NO. 5242
CAT. NO. 5250 CAT. NO. 5251
CAT. NO. 5253 Left
CAT. NO. 5252 Right (Shown)
BATTERY CONTACTS FOR MOLDED CASES
16
“C” CELL
“D” CELL
“18650” LITHIUM-ION BATTERY HOLDERS
“18650” LITHIUM-ION BATTERY HOLDERS
CAT. NO. 1042
CAT. NO. 1048
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
17
FEATURES
•Low profile surface mount holder for Cylindrical
Lithium and alkaline batteries
•UL 94V-0 heat resistant nylon housing well
suited for reflow soldering
•Battery installation and removal does not
require tools
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze,
Gold Plate (Flash)
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze,
Tin-Nickel Plate
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze,
Tin-Nickel Plate
Operating Temp Range:
-60ºF to +290ºF (-50ºC to +145ºC)
D
.145 [3.7] DIA. .062 [1.57] DIA.
x .062 [1.6] L.
2.175 [55.2]
.709 [18.0]
.630
[16.0]
.130 [3.3]
2.710 [68.9]
3.034 [77.1]
.813
[20.7]
3.386 [86.0]
Pad Layout
3.386 [86.0] MIN.
.136 [3.5] DIA.
(2) PLS
.094 [2.4] DIA.
.630 [16.0]
2.175 [55.2]
.289 [7.3] MIN.
.250
[6.4]
MIN.
.125 [3.2] DIA.
(2) PLS
D
.709 [18.0]
.062 [1.57] DIA.
X .062 [1.57] L.
.130 [3.3]
.145 [3.7]
DIA.
2.175 [55.2]
.753 [19.1]
2.710 [68.9]
3.034 [77.1]
1.566 [39.8]
1.378 [35.0]
3.386 [86.0]
CAT. NO. 1043
CAT. NO. 1049
.140 [3.6]
TYP.
2.710 [68.9]
.709 [18.0]
.813
[20.7]
.145 [3.7] DIA.
.062 [1.57] DIA.
x .062 [1.6] L.
.130 [3.3]
2.175 [55.2]
3.034 [77.1]
.630
[16.0]
2.822 [71.6]
Mounting Detail
.136 [3.45]
(2) PLS
2.175 [55.2]
.094 [2.39]
.047 [1.19]
(2) PLS .630
[16.0]
2.822 [71.6]
.125 [3.2] DIA.
(2) PLS
.709 [18.0]
1.566 [39.8]
.062 [1.57] DIA.
X .062 [1.57] L.
1.378 [35.0]
.130 [3.3]
.145 [3.7] DIA.
2.175 [55.2]
2.710 [68.9]
3.034 [77.1]
.753 [19.1]
2.822 [71.6]
Mounting Detail
.125 [3.18] DIA.
(2) PLS
2.175 [55.2]
.753 [19.1]
.047 [1.2] DIA. (4) PLS
2.822 [71.6]
.136 [3.45] (2) PLS
.094 [2.4]
DIA.
1.378
[35.0]
Pad Layout
2.175 [55.2]
.289 [7.3] MIN.
.125 [3.2] DIA.
(2) PLS.
.250
[6.4]
MIN. .094 [2.4]
DIA.
.136 [3.5] DIA.
(2) PLS.
.753
[19.1]
1.378
[35.0]
3.386 [86.0] MIN.
SURFACE MOUNT
THRU HOLE MOUNT
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze,
Gold Plate (Flash)
•Securely holds battery in place
•Polarity clearly marked for orientation
•Accomodates cells with or without built-in PCB
protection circuits
APPLICATIONS
• Computer memory, power backup systems
• Digital readers
• Laptop and touch pad computers
• PLC and industrial controls
“18650” CELL
SINGLE CELL
DUAL CELL
NOTE: PC Mount
Battery Clip Available
See Page 9.
DWG. 3
Mounting Detail
.050DIA. x
.050 L.LEG
A
W
B MAX.
H
(REF)
L.140 [3.6]
.038 [0.97]
Tel (718) 956—8900
•
Fax (718) 956—9040
(800) 221—5510
•
kec@keyelco.com RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
THM LOW PROFILE LITHIUM & ALKALINE CELL HOLDERS
THM BATTERY HOLDERS
Mounting Detail
.047 [1.19] DIA.
.078 [1.98] DIA.
G
L
1029C
RETAINER
COVER
1024C 108C
1028C
1029LC
RETAINER
COVERS
Mounting Detail
SPECIFICATIONS
Base/Retainer Cover: PBT, UL 94V-0
Contacts: .012 (.30) Stainless Steel, Tin-Nickel Plate
Operating Temp Range: —60ºF to +290ºF (—50ºC to +145ºC)
FEATURES
•Snap—In PC contact holds firmly in position for wave soldering
•Tin Nickel Plated contacts for excellent solderability and durability
•Polarity clearly marked for orientation
•Snap—on retainer cover (optional) retains battery securely to withstand
shock and vibration. Helps protect against shorting. Tamper—proof.
APPLICATIONS
• Computer memory, power backup systems.
• Telecommunications
• Residential, industrial and commercial security systems
• PLC and industrial controls
THM LOW PROFILE
THM ULTRA LOW PROFILE
DWG. 1
DWG. 2
BATTERY RELEASE
(2) PLS.
H (REF)
W
B MAX
.025 [.64]
(2) PLS
.050 [1.22]
x .060 [1.52] L.
.178 [4.5]
L
A
F
L
.047 [1.2] DIA. HOLE
(4) PLS
G.078 [2.0]
DIA. HOLE
L
B MAX.
W
A
F
H
REF
.140 [3.6]
.050 [1.3] DIA. x
.050 [1.3]L. LEG
.038 [0.97]
.032 [.81] DIA
(2) PLS.
.031 [.79]
.053 [1.35] DIA
G
L
1020C
1024C
RETAINER
COVERS
1022C
1018C
SPECIFICATIONS
Base: High Temp Nylon 46, — UL 94V—0
Contacts: .012 (.30) Phosphor Bronze, Tin-Nickel Plate
Operating Temp Range: -60ºF to +290ºF (-50ºC to +145ºC)
18
Finish: Tin-Nickel Plate
Finish: Tin-Nickel Plate Finish: Tin Plate
.140
[3.56]
.125 [3.2] DIA.
(2) PLS.
.062 [1.57] DIA.
X .062 [1.57] L. LEG
A
F
L
B MAX.
H
REF.
.038 [0.97]
W
Mounting Detail
.047 [1.19]
DIA.
.094 [2.39]
DIA.
G
L
HOLDER COVER
CAT. CAT. DWG H B CELL
NO. NO. NO. L W (Ref. Dim) A (MAX) F G SIZE BATTERY CROSS REFERENCE
1015 1024C 1 2.145 (54.5) .612 (15.5) .603 (15.3) 2.040 (51.8) 2.359 (59.9) — .265 (6.7) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran
1013 1012C 2 2.145 (54.5) 1.180 (30.0) .603 (15.3) 2.040 (51.8) 2.359 (59.9) .568 (14.4) .265 (6.7) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran
1021 1020C 1 1.933 (49.1) .500 (12.7) .445 (11.3) 1.810 (46.0) 2.140 (54.4) — .209 (5.3) “AAA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran
1023 1022C 2 1.933 (49.1) .875 (22.2) .445 (11.3) 1.810 (46.0) 2.140 (54.4) .430 (10.9) .182 (4.6) “AAA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran
1019 1018C 1 1.487 (37.8) .720 (18.3) .682 (17.3) 1.365 (42.9) 1.690 (42.9) — .319 (8.1) “2/3 A” Duracell DL2/3A, Kodak K123L, Panasonic CR123A, Saft 450SC & VR0450,
Sanyo CR17335SE
1017 1024C 1 1.156 (29.4) .612 (15.5) .603 (15.3) 1.030 (26.2) 1.360 (34.5) — .265 (6.7) “1/2 AA” Energizer 544, Duracell PX28L, Kodak K28A & KS28, Saft LCP3,
Maxell 4LR44, Sanyo CR14250SE
503 — 3 .450 (11.4) .540 (13.7) .506 (12.9) .430 (10.9) .570 (14.5) — .240 (6.1) “1/3 N” Duracell DL1/3N, Sanyo K58L, Energizer CR1/3N
www.keyelco.com
31—07 20th Road – Astoria, NY 11105—2017
“1/3N” • “AAA” • “1/2AA • “CR2” • “AA” • “2/3A”
“1/3N”
SINGLE
DUAL
HOLDER COVER
CAT. CAT. HB CELL
NO. NO. L W (Ref. Dim) A (MAX) F G SIZE BATTERY CROSS REFERENCE
Energizer 544, CR2, Duracell PX28L, CR2, Kodak K28A & KS28,
108 108C 1.160 (29.5) .640 (16.3) .633 (16.1) 1.030 (26.2) 1.360 (34.5) .610 (15.5) .279 (7.1) “1/2 AA” CR2, Panasonic CR14250, CR2, Saft LCP3, Maxell 4LR44, CR2,
“CR2” Sanyo CR14250SE, CR2
1028 1024C
1028C 2.160 (54.9) .640 (16.3) .633 (16.1) 2.040 (51.8) 2.360 (59.9) 1.610 (40.9) .279 (7.1) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran
1029 1029C 1.500 (38.1) .720 (18.3) .712 (18.1) 1.375 (34.9) 1.700 (43.2) .950 (24.1) .320 (8.1) “2/3 A” Duracell DL2/3A, Kodak K123L, Panasonic CR123A,
1029LC Saft 450SC & VR0450, Sanyo CR17335SE
SMT BATTERY HOLDERS
19
SMT LOW PROFILE LITHIUM & ALKALINE CELL HOLDERS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Mounting Detail
.250 [6.4] MIN
.289 [7.3] MIN.
.078 [2.0]
DIA. HOLE.
G
L MIN.
.050DIA. x
.050 L.LEG
A
W
B MAX.
L
.250 [6.3]
(2) PLS
H
REF.
B MAX.
.125 [3.2] (2) PLS
A
L
W
H
REF.
BATTERY RELEASE
(2) PLS.
.050 [1.3] DIA. x
.050 [1.3]L. LEG
A
B MAX.
L
.200 [5.1]
(2) PLS.
H
REF.
W
.050 [1.3] DIA. x
.050 [1.3]L. LEG
L
B MAX.
W
A
F
H
REF.
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash)
Operating Temp: -60°F to +290°F (-50°C to +145°C)
FEATURES
• Low profile surface mount holders for Cylindrical
Lithium and Alkaline batteries
• UL 94V-0 Heat resistant Nylon Housings well suited
for reflow soldering
• Designed for vacuum pick and place assembly
• Gold-plated Phosphor Bronze contacts assure
low contact resistance and are readily solderable
• Ideal for both lead free solder and traditional
solder process
• Battery installation and removal does not require tools
• Securely holds battery in place
• Polarity clearly marked for orentation
• Operating temp range:
-60ºF to +290ºF (-50ºC to +145ºC)
APPLICATIONS
• Computer memory, power backup systems
• Telecommunications
• Residential, industrial and commercial security systems
• PLC and industrial controls
CAT. NO. ON TAPE H B CELL TAPE & REEL SPECS
BULK & REEL COVER L W (REF) A (MAX) G SIZE PACKED ON 13” REEL BATTERY CROSS REFERENCE
1016 1016TR 1.723 (43.8) .612 (15.5) .603 (15.3) 1.030 (26.2) 1.360 (34.5) .265 (6.7) “1/2 AA” 56mm wide, 24mm pitch Energizer 544, Duracell PX28L, Kodak K28A & KS28,
1024C 125 pcs/reel Panasonic CR14250, Saft LCP3, Maxell 4LR44,
Sanyo CR14250SE
1024 1024TR 2.711 (68.9) .612 (15.5) .603 (15.3) 2.040 (51.8) 2.359 (59.9) .265 (6.7) “AA” 88mm wide, 28mm pitch, Energizer, Duracell, Panasonic, Sanyo,
1024C 100 pcs/reel Varta, Rayovac, Tadiran
1018 1018TR 1018C 2.053 (52.2) .720 (18.3) .682 (17.3) 1.365 (34.7) 1.690 (42.9) .319 (8.1) “2/3 A” 72mm wide, 32mm pitch,Duracell DL2/3A, Kodak K123L, Panasonic CR123A,
100 pcs/reel Saft 450SC & VR0450, Sanyo CR17335SE
DWG 1
SPECIFICATIONS
Base: High Temp Nylon 46, UL 94V-0
Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash)
DWG 2 DWG 3
CAT. NO. ON TAPE DWG H B CELL TAPE AND REEL SPECS
BULK & REEL COVER NO. L W (REF) A (MAX) F G SIZE PACKED ON 13” REEL BATTERY CROSS REFERENCE
1020 1020TR 1020C 12.421 .500 .445 1.810 2.140 —.209 “AAA” 88mm Wide, 24mm pitch, Energizer, Duracell, Panasonic,
(61.5) (12.7) (11.3) (46.0) (54.4) (5.3) 200 pcs/reel Sanyo, Varta, Rayovac, Tadiran
1022 1022TR 1022C 22.421 .875 .445 1.810 2.140 .430 .182 “AAA” 88mm Wide, 32mm pitch, Energizer, Duracell, Panasonic,
(61.5) (22.2) (11.3) (46.0) (54.4) (10.9) (4.6) 125 pcs/reel Sanyo, Varta, Rayovac, Tadiran
1024 1024TR 1024C 12.711 .612 .603 2.040 2.359 —.265 “AA” 88mm wide, 28mm pitch, Energizer, Duracell, Panasonic,
(68.9) (15.5) (15.3) (51.8) (59.9) (6.7) 100 pcs/reel Sanyo, Varta, Rayovac, Tadiran
1012 1012TR 1012C 22.711 1.180 .603 2.040 2.359 .568 .265 “AA” 88mm Wide, 48mm pitch, Energizer, Duracell, Panasonic,
(68.9) (30.0) (15.3) (51.8) (59.9) (14.4) (6.7) 100 pcs/reel Sanyo, Varta, Rayovac, Tadiran
498 498TR — 3.748 .540 .506 .430 .570 —.240 “1/3 N” 44mm Wide, 24mm pitch, Duracell DL1/3N, Sanyo K58L,
(19.0) (13.7) (12.9) (10.9) (14.5) (6.1) 125 pcs/reel Energizer CR1/3N
SMT ULTRA LOW PROFILE
SMT ULTRA LOW PROFILE
1024C
RETAINER
COVER
1018C
RETAINER
COVER
Mounting Detail
.200 [5.1]
.078 [2.0]
DIA. HOLE
G
.250 [6.4] MIN.
L MIN.
F
Mounting Detail
.200 [5.1]
MIN
.078 [1.98]
DIA. HOLE
G
.250 [6.4] MIN
L MIN
Mounting Detail
.053 [1.3] DIA
G
.118 [3.0]
L
.125 [3.2]
.156 [4.0]
1020C
RETAINER
COVERS
1022C
AVAILABLE ON TAPE AND REEL
“1/3N” • “AAA” • “1/2AA” • “AA” • “ 2/3A”
SINGLE
“1/3N”
DUAL
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
LITHIUM BATTERY HOLDERS
SMT & THM POLARIZED LITHIUM CELL HOLDERS
RUGGED STEEL & ALUMINUM LITHIUM CELL HOLDERS
6 VOLT LITHIUM CELL HOLDERS
FEATURES
• Low profile surface mount and Thru Hole Mount Holders
for Lithium batteries
• UL 94V-0 Heat resistant Nylon Housings well suited for
reflow or wave soldering.
• Battery installation and removal does not require tools.
• Securely holds battery in place
• Polarized holder offers circuit protection against
improper battery installation
APPLICATIONS
•Computer memory, power backup systems
•Telecommunications
•Residential, industrial security systems
•PLC and industrial controls
SPECIFICATIONS
Base: High Temp Nylon 46, UL Rated 94V-0
Contacts: .012 (1.30) Phosphor Bronze, Gold Plate (Flash) - SMT
.012 (1.30) Phosphor Bronze, Tin-Nickel Plate - THM
Operating temp range: -60°F to 290°F (-50°C to 145°C)
Mounting Detail
.047 [1.19] DIA. HOLE
(2) PLS
.078 [1.98] DIA.
B
L
Mounting Detail
.078 [1.98] DIA.
.250 [6.4] MIN. TYP
.289 [7.3] MIN. TYP
L
B
1.125 [28.58]
POLARIZING
TAB
SPRING
.648 [16.46]
.836 [21.25]
REF.
.239 [6.06]
.600
[15.24]
.205 [5.21] TAB
.125 [3.18] DIA.
(2) PLS
1.656
[42.06]
REF. 1.000
[25.40]
.750
[19.05]
.415 [10.54]
.187 [4.75] TAB
1018C
RETAINER
COVER
FITS ALL
HOLDERS
• Polarizing Tab for proper orientation
• Lightweight, ideal for rugged applications
• DL223A or Equivalent Batteries
SPECIFICATIONS
Frame: Aluminum 2024-T3 Terminals: Brass, Tin Plate
Spring Contacts: .025 (.64) Dia. Spring Steel, Nickel Plate
•Sturdily constructed of quality materials •Contacts made from Brass, Nickel Plate •Ideal for punishing applications
Mounting Detail
.082 [2.08] DIA HOLE (2) PLS.
FOR P/N 131 ONLY
.118 [3.0] DIA HOLE (4) PLS.
1.557 [39.5]
1.125 [28.6]
.437
[11.1]
Mounting Detail
.082 [2.1] DIA HOLE
(2) PLS. P/N 2103
1.224 [31.1]
.430 [10.9] .531
[13.5]
.437
[11.1]
.128 [3.3] DIA. HOLE (2) PLS
.144 [3.7] DIA. HOLE
.075 [1.9]
.750 [19.1]
.648 [16.5]
.600
[15.2]
1.125 [28.6]
.415 [10.5]
.750
[19.1]
1.000
[25.4]
1.656
[42.1]
REF.
.125 [3.2] DIA.
(2) PLS
.238 [6.1]
SPRING
POLARIZING
TAB
223
224
CAT. NO. 224 CAT. NO. 223
CAT. NO. 2103
H
(REF)
.050 [1.27] DIA. x
.050[1.27] L. LEG
.250 [6.35]
B MAX.
L
A
.050 [1.27] DIA. x
.050[1.27] L. LEG
H
(REF)
.038 [0.97] TYP.
.140 [3.6]
B MAX.
A
W
L
.606
[15.4] .356
[9.0]
.625 [15.9]
1.156 [29.4]
REF.
.531
[13.5]
.437
[11.1]
.750
[19.1]
.144 [3.66] DIA.
HOLE
.128 [3.25] DIA.
HOLE (2) PLS
.111 [2.8] HOLE TYP.
1.474 [37.4] REF.
.625 [15.9]
1.125 [28.6]
.625
[15.9]
REF.
.437
[11.1]
.750
[19.1]
.437
[11.1]
CAT. NO.1103
CAT. NO.131 CAT. NO.132
20
“CR2” • “CR123A”
STEEL HOLDERS “1/2AA”
ALUMINUM HOLDERS “2/3A”
BATTERY CROSS REFERENCE
Energizer: 544, Duracell: PX28L, Kodak: K28A & KS28,
Panasonic: CR14250, Sanyo: CR14250SE, Saft: LCP3,
Maxell: 4LR44
BATTERY CROSS REFERENCE
Duracell: DL2/3A, Kodak: K123L, Sanyo: CR173335SE,
Saft: 450SC & VR0450
Surface Mount (SMT)
Thru-Hole Mount (THM)
CAT. MOUNTING CELL
NO. STYLE L W H (Ref) A B (MAX) G SIZE
1010 SMT 1.723 (43.8) .612 (15.5) .661 (16.8) 1.030 (26.2) 1.360 (34.5) .265 (6.7) CR2
1011 THM 1.156 (29.4)
1050 SMT 2.062 (52.4) .720 (18.3) .712 (18.1) 1.365 (34.7) 1.690 (42.9) .319 (8.1) CR123A
1051 THM 1.487 (37.8)
BATTERY CROSS REFERENCE
Features pre-connected jumper strap insulated from the
Aluminum base. Batteries held in series circuit without
need of additional wiring.
For printed circuitry we have standardized our most
popular holders with PC Lugs. Choice of single or
multiple holders “AA” assembled with Cat. No. 4002
lug. “C” and “D” assembled with Cat. No. 4003 lug.
1 CELL
ELIMINATES WIRING · LABOR SAVING
ELIMINATES WIRING · LABOR SAVING
ELIMINATES WIRING · LABOR SAVING
3
C
E
4 CELL
For printed circuitry we have standardized our most
popular holders with PC Lugs. Choice of single or mul-
tiple holders “AA” assembled with Cat. No. 4002 lug.
“C” and “D” assembled with Cat. No. 4003 lug.
IEC ANSI/NEDA
LR6
LR14
LR20
15A
14A
13A
HOLDS
CAT. NO. OF
NO. CELLS
146 2
147 3
148 4
149 2
150 3
151 4
“AA” CELL
“C” CELL
LWIEC
ANSI/NEDA
2.250 (57.2)
2.250 (57.2)
2.218 (56.3)
2.218 (56.3)
2.687 (68.3)
2.687 (68.3)
_
.625 (15.9)
_
1.000 (25.4)
_
1.312 (33.3)
LR6
LR14
LR20
15A
14A
13A
2222 1
2223 2
2224 1
2225 2
“AA” CELL
“C” CELL
“D” CELL
2226 1
2227 2
BATTERY .531 (13.4) 1.906 (48.4)
SIZE .565 (14.5) 1.988 (50.5)
(O.D. L)
BATTERY .875 (22.2) 1.875 (47.6)
SIZE 1.125(28.6) 1.969 (50.0)
(O.D. L)
BATTERY 1.187 (30.1) 2.312 (58.7)
SIZE 1.375 (34.9) 2.412 (61.3)
(O.D. L
“D” CELL
BATTERY .531 (13.4) 1.906 (48.4)
SIZE .565 (14.5) 1.988 (50.5)
(O.D. L)
BATTERY .875 (22.2) 1.875 (47.6)
SIZE 1.125 (28.6) 1.969 (50.0)
(O.D. L)
BATTERY 1.187 (30.1) 2.312 (58.7)
SIZE 1.375 (34.9) 2.412 (61.3)
(O.D. L)
)
152 2
153 3
158 4
1 CELL
2 CELL
2 CELL
2 CELL
3 CELL
BATTERY CROSS REFERENCE
MOUNTING HOLE DETAILS
BATTERY CROSS REFERENCE
L W IEC ANSI/NEDA
2.343 (59.5)
2.343 (59.5)
2.625 (66.7)
2.625 (66.7)
_
.750 (19.1)
_
1.187 (30.2)
_
1.562 (39.7)
LR6
LR14
LR20
15A
14A
13A
2228 1
2229 2
2230 1
2231 2
“AA” CELL
“C” CELL
“D” CELL
2232 1
2233 2
BATTERY .531 (13.4) 1.906 (48.4)
SIZE .565 (14.5) 1.988 (50.5)
(O.D. L)
BATTERY .875 (22.2) 1.875 (47.6)
SIZE 1.125 (28.6) 1.969 (50.0)
(O.D. L)
BATTERY 1.187 (30.1) 2.312 (58.7)
SIZE 1.375 (34.9) 2.412 (61.3)
(O.D. L)
2.203 (56.0)
2.203 (56.0)
ALUMINUM HOLDERS CONNECTED IN SERIES
INTERCONNECT BATTERY HOLDERS
21
ALUMINUM HOLDERS WITH PC LUGS
STEEL HOLDERS WITH PC LUGS
Mounting Detail
L
.082 [2.1] DIA, TYP
W
Mounting Detail
L
.082 [2.1] DIA, TYP
W
MOUNTING HOLE PATTERN
Energizer, Duracell, Pana-
sonic, Sanyo, Varta, Ray-
ovac, Tadiran
Energizer, Duracell, Pana-
sonic, Sanyo, Varta, Ray-
ovac, Tadiran
Energizer, Duracell, Pana-
sonic, Sanyo, Varta, Ray-
ovac, Tadiran
HOLDS
CAT. NO. OF
NO. CELLS
HOLDS
CAT. NO. OF
NO. CELLS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
4 CELL
RUGGED & LIGHTWEIGHT ALUMINUM BATTERY HOLDERS
ALUMINUM BATTERY HOLDERS
22
* 1 Single clip holds 2 batteries in place. ** 2 Clips hold 4 batteries in place. ** 3 Clips hold 6 batteries in place.
Lightweight yet strong, constructed of aircraft grade aluminum. Batteries snap-fit securely into clips.
FIG. 1
FIG. 3 FIG. 4
FIG. 2
1 CELL 2 CELL
BATTERY CROSS REFERENCE
137 11
138 23
169 33
170 43
IEC ANSI/NEDA MANUFACTURERS
“AAA” CELL
“AA” CELL
“C” CELL
“D” CELL
“N” OR “12V” CELL
LITHIUM “2/3A” OR “CR123” CELL
139 11
140 23
171 33
182 43
189 22
192 44
193 64
173 11
174 23*
185 22
187 33
196 4 4**
197 64
175 11
176 23*
186 22
190 33
200 4 4**
201 64
205 6 4***
154 11
155 23
156 33
132 1 1 CR17345 5018LC
203P
1290
1290-79 REF. PAGE 31
1290-66
LR03 24A
LR6 15A
LR20
LR1
6LR61 1604A,
1604LC, 11604
7.2H5
910A
13A
14A
HOLDS
CAT. NO. OF FIG.
NO. CELLS NO.
“9 VOLT” BATTERY
2 CELL 4 CELL
3 CELL
MODIFICATIONS
We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custom-
built holders. Holders with PC and Quick-Fit terminalsavailable on special order.
LR14
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
6 CELL
CAT. NO. 205
6 CELL
CAT. NO. 193
CAT. NO. 197
Contacts: Brass, Nickel Plate
Lugs: Brass, Tin Plate
Frame and Battery Clips: Aluminum
Insulating Washers: Moisture Proof Resin impregated fiber
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
All major manufactures
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
BATTERY .531 (13.4) 1.906 (48.4)
SIZE .565 (14.5) 1.988 (50.5)
(O.D. L)
BATTERY .875 (22.2) 1.875 (47.6)
SIZE 1.125(28.6) 1.969(50.0)
(O.D. L)
BATTERY 1.187 (30.1) 2.312 (58.7)
SIZE 1.375 (34.9) 2.412 (61.3)
(O.D. L)
BATTERY .375 (9.5) 1.673 (42.5)
SIZE .468 (11.9) 1.752 (44.5)
(O.D. L)
BATTERY .375 (9.5) 1.110 (28.2)
SIZE .468 (11.9) 1.189 (30.2)
(O.D. L)
WL H C K J A M
CAT. DWG. Width Length Height Height to Battery Distance Between Mounting Holes Mounting Holes Mounting Holes
NO. NO. Of Base Of Base Of Base Center Height Battery Contacts Width Length (Diameter)
“AAA” CELL
137 1 .437 (11.1) 1.915 (48.6) .467 (11.9) .281 (7.1) _.250 (6.4) 1.500 (38.1) .111 (2.8)
138 3 .812 (20.6) 1.915 (48.6) .467 (11.9) .281 (7.1) .437 (11.1) _.875 (22.2) .144 (3.7)
169 3 1.250 (31.8) 1.915 (48.6) .467 (11.9) .281 (7.1) .437 (11.1) .438 (11.1) .875 (22.2) .144 (3.7)
170 3 1.687 (42.8) 1.915 (48.6) .467 (11.9) .281 (7.1) .437 (11.1) .875 (22.2) .875 (22.2) .144 (3.7)
“AA” CELL
139 1 .625 (15.9) 2.140 (54.4) .578 (14.7) .392 (10.0) _.406 (10.3) 1.500 (38.1) .111 (2.8)
140 3 1.125 (28.6) 2.156 (54.8) .562 (14.3) .375 (9.5) .625 (15.9) _1.218 (30.9) .144 (3.7)
171 3 1.750 (44.5) 2.140 (54.4) .578 (14.7) .392 (10.0) .625 (15.9) .625 (15.9) 1.218 (30.9) .144 (3.7)
182 3 2.656 (67.5) 2.140 (54.4) .615 (15.6) .421 (10.7) .718 (18.2) 1.437 (36.5) 1.218 (30.9) .144 (3.7)
189 2 .625 (15.9) 4.110 (104.4) .593 (15.1) .406 (10.3) _.437 (11.1) 3.000 (76.2) .128 (3.3)
192 4 1.125 (28.6) 4.093 (104.0) .593 (15.1) .406 (10.3) .625 (15.9) _3.093 (78.6) .144 (3.7)
193 4 1.750 (44.5) 4.093 (104.0) .593 (15.1) .406 (10.3) .625 (15.9) .625 (15.9) 3.125 (79.4) .144 (3.7)
“C” CELL
173 1 .750 (19.1) 2.093 (53.2) .968 (24.6) .613 (15.6) _.437 (11.1) 1.500 (38.1) .144 (3.7)
174 3* 1.625 (41.3) 2.093 (53.2) 1.120 (28.4) .613 (15.6) 1.000 (25.4) _1.250 (31.75) .144 (3.7)
185 2 .750 (19.1) 4.046 (102.8) .968 (24.6) .593 (15.1) _.500 (12.7) 3.187 (80.9) .144 (3.7)
187 3 2.840 (72.1) 2.125 (54.0) .968 (24.6) .593 (15.1) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) .144 (3.7)
196 4** 1.625 (41.3) 4.075 (103.5) 1.120 (28.4) .593 (15.1) 1.000 (25.4) _3.187 (80.9) .144 (3.7)
197 4 2.875 (73.0) 4.075 (103.5) .968 (24.6) .593 (15.1) 1.150 (29.2) 1.000 (25.4) 3.187 (80.9) .144 (3.7)
“D” CELL
175 1 1.000 (25.4) 2.562 (65.1) 1.262 (32.1) .763 (19.4) _.750 (19.1) 1.750 (44.5) .128 (3.3)
176 3* 2.062 (52.4) 2.562 (65.1) 1.468 (37.3) .741 (18.8) 1.312 (33.3) _1.500 (38.1) .144 (3.7)
186 2 1.000 (25.4) 4.921 (125.0) 1.262 (32.1) .747 (19.0) _.687 (17.4) 4.125 (104.8) .128 (3.3)
190 3 3.375 (85.7) 2.562 (65.1) 1.262 (32.1) .775 (19.7) 1.350 (34.3) 1.125 (28.6) 1.937 (49.2) .144 (3.7)
200 4** 2.062 (52.4) 4.870 (123.7) 1.468 (37.3) .741 (18.8) 1.312 (33.3) _4.375 (111.1) .144 (3.7)
201 4 3.375 (85.7) 4.920 (125.0) 1.262 (32.1) .775 (19.7) 1.343 (34.1) 1.125 (28.6) 4.250 (108.0) .144 (3.7)
205 4*** 2.062 (52.4) 7.270 (184.7) 1.468 (37.3) .741 (18.8) 1.312 (33.3) _6.750 (171.5) .144 (3.7)
“N” OR “12V” CELL
154 1 .437 (11.1) 1.328 (33.7) .483 (12.3) .297 (7.5) _.250 (6.4) .906 (23.0) .111 (2.8)
155 3 .937 (23.8) 1.347 (34.2) .483 (12.3) .297 (7.5) .500 (12.7) _.875 (22.2) .128 (3.3)
156 3 1.500 (38.1) 1.347 (34.2) .483 (12.3) .297 (7.5) .531 (13.5) .562 (14.3) .875 (22.2) .111 (2.8)
“2/3A” CELL
132 1 .625 (15.9) 1.474 (37.4) .625 (15.9) .437 (11.1) _.437 (11.1) 1.125 (28.6) .111 (2.8)
“9 VOLT” BATTERY
203-P 1 1.125 (28.6) 2.000 (50.8) .797 (20.2) ___ __
1290 1 1.125 (28.6) 1.900 (48.3) .718 (18.2) ___ __
1290-66 1* 1.125 (28.6) 1.900 (48.3) .857 (21.8) ___ __
1290-79 1 1.125 (28.6) 1.900 (48.3) .812 (20.6) ___ __
DIMENSIONAL DRAWINGS FOR ALUMINUM BATTERY HOLDERS
* 1 Single clip holds both batteries in place. ** 2 Clips hold four batteries in place. *** 3 Clips hold six batteries inplace. DIMENSIONS ARE FOR REFERENCE ONLY
MATERIAL SPECIFICATIONS
Insulating Washers: Moisture proof, resin impregnated fibre Frame and Clips: Aluminum 2024-T3
Terminal Lugs: Brass, Tin Plate Contact Eyelet: Brass, Nickel Plate
J
H
C
L
K
A
W
M(MOUNTING HOLES) M
A
L
C
H
JWK
(MOUNTING HOLES)
DWG. 3 DWG. 4
W
M
A
L
C
H
J
(MOUNTING HOLES)
J
H
C
L
A
M
W
(MOUNTING HOLES)
DWG. 1 DWG. 2
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
ALUMINUM BATTERY HOLDERS
23
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
RUGGED STEEL BATTERY HOLDERS
STEEL BATTERY HOLDERS
24
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
An established design that has gained wide acceptance for commercial and military applications. Batteries are held
under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place
and prevent shifting or loosening. Refer to page 10. Recommended for use where shock or severe vibration is
encountered. Special fabrication for more than four batteries or variations from standard stock parts can be
assembled to meet your requirements.
•Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells
•Corrosion Resistant, Nickel Plate
•Brass Contacts, Nickel Plate
•Moisture Proof Resin Impregnated, Fibre Insulating Washers
FIG. 2 STEEL BASE. LITHIUM (SINGLE CELL)
FIG. 3
2 CELL 3 CELL 4 CELL
NON-INSULATED
DIMPLE CONTACT INSULATED
CONTACT
1100 SERIES
INSULATED
CONTACTCONTACT
INSULATED
2100 SERIES
(GROUNDED
ONE SIDE)
(FULLY INSULATED)
PHENOLIC BASE FOR 2, 3, 4 CELLS (SIDE BY SIDE)
FIG. 1 STAINLESS STEEL BASE. INSULATOR TUBES SUPPLIED
FOR 2-3-4 CELLS (END TO END)
1 CELL 2 CELL 3 CELL 4 CELL
MODIFICATIONS
We welcome the opportunity to quote on variations of
standard items. Use our engineering service for your custom-built
holders. Holders with PC and Quick-Fit terminalsavailable on
special order.
—1103 12
1175 2175 11
— 2176* 23
— 2190* 33
— 2192* 43
1186 2186 21
1199 2199 31
1162 2162 41
ONE CONTACT ALL CONTACTS
INSULATED INSULATED
1173 2173 11
— 2174* 23
— 2187* 33
— 2188* 43
1185 2185 21
1195 2195 31
1198 2198 41
1139 2139 11
— 2140* 23
— 2171* 33
— 2182* 43
1189 2189 21
1191 2191 31
1194 2194 41
*Clips mounted on .062 (1.57) thick Phenolic board.
“AA” CELL
IEC ANSI/NEDA
BATTERY
MANUFACTURERS
“C” CELL
“D” CELL
“1/2AA” LITHIUM CELL
LR6 15A
LR14 14A
LR20 13A
CR11108 1406LC
FIG.
NO.
HOLDS
NO. OF
CELLS
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer, Duracell,
Panasonic, Sanyo, Varta,
Rayovac, Tadiran
Energizer 544, Duracell PX28L,
Panasonic CR14250
CAT. NO. CAT. NO.
1100 2100 BATTERY CROSS REFERENCE
SERIES SERIES
BATTERY .475 (12.1) .965 (24.5)
SIZE .510 (13.0) .992 (25.2)
(O.D. L)
BATTERY 1.187 (30.1) 2.312 (58.7)
SIZE 1.375 (34.9) 2.412 (61.3)
(O.D. L)
BATTERY .875 (22.2) 1.875 (47.6)
SIZE 1.125(28.6) 1.969(50.0)
(O.D. L)
BATTERY .531 (13.4) 1.906 (48.4)
SIZE .565 (14.5) 1.988 (50.5)
(O.D. L)
1100 2100
SERIES SERIES
ONE CONTACT ALL CONTACTS
INSULATED INSULATED
CAT. NO. CAT. NO.
HOLDS WL HC J A
NO. OF DWG. Width Length Height Height to Mounting Hole Mounting Holes
CELLS NO. Of Base Of Base Of Holder Battery Center Distance CTR To CTR
“AA” CELL
1139 2139 1 1 .687 (17.4) 2.125 (54.0) .656 (16.7) .437 (11.1) _1.343 (34.1)
_2140* 2 3 1.250 (31.8) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1)
_2171* 3 3 2.000 (50.8) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1)
_2182* 4 3 2.750 (69.9) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1)
1189 2189 2 1 .687 (17.4) 4.093 (104.0) .656 (16.7) .437 (11.1) _3.312 (84.1)
1191 2191 3 1 .687 (17.4) 6.030 (153.2) .656 (16.7) .437 (11.1) _5.250 (133.4)
1194 2194 4 1 .687 (17.4) 8.010 (203.5) .656 (16.7) .437 (11.1) _7.230 (183.6)
“C” CELL
1173 2173 1 1 .687 (17.4) 2.125 (54.0) 1.000 (25.4) .625 (15.9) _1.343 (34.1)
_2174* 2 3 1.750 (44.5) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1)
_2187* 3 3 2.937 (74.6) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1)
_2188* 4 3 4.125 (104.8) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1)
1185 2185 2 1 .687 (17.4) 4.093 (104.0) 1.000 (25.4) .625 (15.9) _3.312 (84.1)
1195 2195 3 1 .687 (17.4) 5.937 (150.8) 1.000 (25.4) .625 (15.9) _5.156 (131.0)
1198 2198 4 1 .687 (17.4) 7.906 (200.8) 1.000 (25.4) .625 (15.9) _7.125 (181.0)
“D” CELL
1175 2175 1 1 .687 (17.4) 2.562 (65.1) 1.281 (32.5) .796 (20.2) _1.625 (41.3)
_2176* 232.125 (54.0) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3)
_2190* 333.687 (93.6) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3)
_2192* 435.250 (133.4) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3)
1186 2186 21.687 (17.4) 4.937 (125.4) 1.281 (32.5) .796 (20.2) _4.000 (101.6)
1199 2199 31.687 (17.4) 7.281 (184.9) 1.281 (32.5) .796 (20.2) _6.343 (161.1)
1162 2162 41.687 (17.4) 9.625 (244.5) 1.281 (32.5) .796 (20.2) _8.687 (220.6)
“1/2AA” LITHIUM CELL
1103 12.625 (15.9) 1.156 (29.4) .595 (15.1) .345 (8.8) _.531 (13.5)
DIMENSIONAL DRAWINGS FOR STEEL BATTERY HOLDERS
STEEL BATTERY HOLDERS
25
MATERIAL SPECIFICATIONS:
Clips: Spring Steel, Nickel Plate Phenolic Base: Type PBE, Per MIL-P-3115C
Contact Eyelets: Brass, Nickel Plate Stainless Steel Base: Ribbed, For Added Support
Insulating Washers: Resin Impregnated Fibre Steel Base: Spring Steel, Nickel Plate
Solder Lugs: Brass, Tin Plate
L
H
C
W
A
.144 [3.7] DIA. (2) PLS
INSULATED
CONTACT
DIMPLE
CONTACT
C
J
A
H
L
W
INSULATED CONTACTS
.144 [3.7] DIA. (2) PLS
PHENOLIC BASE
AC
H
L
W
.144 [3.7] DIA.
.437
[11.1]
INSULATED CONTACTS
.128 [3.3] DIA. (2) PLS
DWG. 1 1100 SERIES STAINLESS STEEL BASE (END-TO-END) DWG. 1 2100 SERIES STAINLESS STEEL BASE (END-TO-END)
DWG. 3 2100 SERIES PHENOLIC BASE (SIDE-BY-SIDE)
DWG. 2 “1/2AA” LITHIUM STEEL BASE (SINGLE CELL)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
A
W
C
H
L
.144 [3.7] DIA. (2) PLS
INSULATED CONTACTS
*Clips mounted on .062 (1.57) Thick, Phenolic board. DIMENSIONS ARE FOR REFERENCE ONLY
SPECIFICATIONS
Holder: Polypropylene
Springs: Spring Steel, Nickel Plate
PC Pins: .031 (.79) Brass, Nickel Plate
Wires (Red & Black): #26 AWG, Tinned, .187 (4.8) end strip UL/CSA1007
PLASTIC BATTERY HOLDERS
26
CAT. NO. 2460 PC Mount
CAT. NO. 2460RB PC Mount w/ribbon
CAT. NO. 2461 Wire Leads - 6.0 (150)
CAT. NO. 2462 PC Mount
CAT. NO. 2462RB PC Mount w/ribbon
CAT. NO. 2463 Wire Leads - 6.0 (150)
CAT. NO. 2464 PC Mount
CAT. NO. 2464RB PC Mount w/ribbon
CAT. NO. 2465 Wire Leads - 6.0 (150)
CAT. NO. 2477 PC Mount
CAT. NO. 2477RB PC Mount w/ribbon
CAT. NO. 2478 Wire Leads - 6.0 (150)
CAT. NO. 2466 PC Mount
CAT. NO. 2466RB PC Mount w/ribbon
CAT. NO. 2467 Wire Leads - 6.0 (150)
CAT. NO. 2468 PC Mount
CAT. NO. 2468RB PC Mount w/ribbon
CAT. NO. 2469 Wire Leads - 6.0 (150)
CAT. NO. 2479 PC Mount
CAT. NO. 2479RB PC Mount w/ribbon
CAT. NO. 2480 Wire Leads - 6.0 (150)
CAT. NO. 2481 PC Mount
CAT. NO. 2481RB PC Mount w/ribbon
CAT. NO. 2482 Wire Leads - 6.0 (150)
CAT. NO. 2485 PC Mount
CAT. NO. 2485RB PC Mount w/ribbon
CAT. NO. 2486 Wire Leads - 6.0 (150)
•Economical design, available with PC terminals or wire leads
•Batteries securely held in place to assure a positive connection and
maintain a low contact resistance
•Contact springs self-adjust to variations in battery length
•Withstands shock and vibration
•Available with solder lugs or male/female snap fasteners
•For easy removal, available with ribbon
•Holders for multiple batteries are prewired in series.
“1/2 AA” Cell -or “CR2” Cell
One (1) Cell Two (2) Cells - In Series Three (3) Cells - In Series Four (4) Cells - In Series
Four (4) Cells - In Series
Three (3) “AAA” Cells - In SeriesTwo (2) Cells - In SeriesOne (1) Cell
“N” Cell - 1.5V or “12V” Cell Two (2) “N” or Two (2) “12V” Cells - In Series
.098 [2.5] DIA.
(2) PLS
.665
[16.9]
.547
[13.9]
.500
[12.7]
2.047 [52.0]
2.244 [57.0]
- +
.500
[12.7]
1.760 [44.7]
1.968 [50.0]
.590
[15.0]
.512
[13.0]
- +
.472 [12.0]
.602
[15.3]
1.358 [34.5]
1.162 [29.5]
.689
[17.5]
- +
.500
[12.7]
1.400 [35.0]
1.200 [30.0]
.590
[15.0]
.512
[13.0]
- +
.531
[13.5]
.550 [14.0] .590
[15.0]
THIS SIDE ONLY
TERMINALS
(
4
)
PLS
1.500 [38.1]
.093 [2.36] DIA.
1.062
[27.0]
-
+
.968
[24.6]
.500
[12.7]
(
3
)
PLS
.115 [2.9] DIA.
.512 [13.0]
2.086 [53.0]
THIS SIDE ONLY
TERMINALS
.500
[12.7]
-
+
.500
[12.7]
2.050 [52.7]
(2) PLS
.125 [3.2] DIA.
.512 [13.0]
TERMINALS
THIS SIDE ONLY
.500
[12.7]
1.476
[37.5]
-
+
1.980
[50.3]
2.100 [53.0]
.500
[12.7]
(
2
)
PLS
.093 [2.36] DIA.
.512 [13.0]
TERMINALS
THIS SIDE ONLY
.500
[12.7]
-
+
.590
[15.0]
1.296
[32.9]
.650 [16.0] .500
[12.7]
.120 [3.1] DIA.
(2) PLS
2.343 [59.5]
TERMINALS
THIS SIDE ONLY
-
+
(
2
)
PLS
.130 [3.3] DIA.
1.901
[48.3]
.500 [12.7]
.669 [17.0]
2.283 [58.0]
TERMINALS
THIS SIDE ONLY
.500
[12.7]
-
+
.115 [2.9] DIA.
(2) PLS
2.480
[63.0]
2.283 [58.0] .630 [16.0]
THIS SIDE ONLY
TERMINALS
.500
[12.7]
.500
[12.7]
-
+
ECONOMICAL PLASTIC BATTERY HOLDERS
CAT. NO. 2470 PC Mount
CAT. NO. 2470RB PC Mount w/ribbon
CAT. NO. 2471 Wire Leads - 6.0 (150)
CAT. NO. 2472 PC Mount
CAT. NO. 2472RB PC Mount w/ribbon
CAT. NO. 2473 Wire Leads - 6.0 (150)
MODIFICATIONS
We welcome the opportunity to quote on variations of standard items. Use our
Engineering services for your custom-built holders. Holders for “C” and “D” cell
are available on request.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
“AA”
“AAA”
“1/2AA” • “CR2” • “N” • “12V”
DENSI-PAK® BATTERY HOLDERS
SPECIFICATIONS
Holder: ABS
Springs: Spring Steel, Nickel Plate
Wires (Red & Black): 6.0 (150) long, #26 AWG, Tinned, .187 (4.8) end strip UL/CSA1007
•Supports high density packaging on or off board,
positions anywhere for easy access to batteries
•Economical design
•Batteries securely held in place to assure a positive connection
and maintain a low contact resistance
•Contact springs self-adjust to variations in battery length
•Snap-on cover protects and secures batteries
•Withstands shock and vibration
2.687 [68.3]
1.394 [35.4]
.709 [18.0]
FOR SELF-TAPPING SCREW
COVER
HOLDER
1.476 [37.5]
2.126 [54.0]
COVER
HOLDER
.591 [15.0]
1.024 [26.0]
COVER
.630 [16.0] 2.480 [63.0]
HOLDER
1.890 [48.0]
2.697 [68.5]
.728 [18.5]
FOR SELF-TAPPING SCREW
HOLDER
COVER
•Features separable “snap-on/snap-off” battery connector (9 Volt type) to assure
reliable connections
•Economical design, holders available for two, three or four cells. Wired in series
to accept connector (9 Volt type)
•Easily disconnect battery holder from your device - no tools required
•Batteries securely held in place to maintain a positive contact and a low
contact resistance
•Battery contact springs self adjust to variations in battery length
•Withstands shock and vibration
•Ideally mates with Keystone 9 Volt battery straps and connectors
(Refer to pages 28 - 29)
SPECIFICATIONS
Holder: Polypropylene
Male/Female Contacts: Brass, Nickel Plate
Springs: Spring Steel, Nickel Plate
2.283 [58.0]
1.250 [31.8]
.630 [16.0]
.500
[12.7]
.130 [3.3] DIA.
(3) PLS
2.283 [58.0]
1.200 [30.5]
1.100 [28.0]
.500
[12.7]
PLASTIC BATTERY HOLDERS WITH SNAP-ON CONNECTORS
Two (2) Cells - 3V Three (3) Cells - 4.5V
Three (3) Cells - 4.5V
Two (2) Cells - 3V
Two Cells - 3V Three (3) Cells - 4.5V Four (4) Cells - 6V
1.901 [48.3]
.500
[12.7]
2.283 [58.0] .669 [17.0]
.130 [3.3] DIA.
(2) PLS
PLASTIC BATTERY HOLDERS
27
CAT. NO. 2490
CAT. NO. 2489
CAT. NO. 2487
CAT. NO. 2484
CAT. NO. 2474 CAT. NO. 2475 CAT. NO. 2476
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
“AA”
“AA”
“AAA”
SHIELDED 9 VOLT BATTERY STRAPS
ECONOMY 9 VOLT BATTERY STRAPS
9 VOLT STRAPS
28
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
MOLDED MOLDED
CAT. *LEAD CAT.
NO. LENGTH NO.
84-4 4.00 (101.6) 81-4
84-6 6.00 (152.4) 81-6
84-8 8.00 (203.2) 81-8
ISTYLE TSTYLE
•Insulates and shields 9 Volt battery snap-on connector contacts
•Assures safe secure use, reduces the potential of short circuits and
prevents tampering with battery contacts
•Protects circuits, prevents unwanted electrical discharge due to
unintended grounding
•Protects battery contacts from dust, dirt, and physical damage
•Ideal for rugged applications, made of high impact molded plastic
with integral wire lead strain relief
.960
[24.4] .500
[12.7]
.312 [7.9]
.500 [12.7]
RED
BLK
.512
[13.0]
.500 [12.7]
.984 [25.0]
.335 [8.5]
RED
BLK
STRAIN
RELIEF
SPECIFICATIONS
Base: ABS
Male/Female Contacts: Brass, Nickel Plate
Wires (Red & Black): #26 AWG, Tinned, .187 (4.8) end strip, UL/CSA1007
*Tolerance on lead length +/-.250 (6.4)
Modifications available with different wire lengths.
84-4
84-6
84-8
81-4
81-6
81-8
MOLDED MOLDED
CAT. *LEAD CAT.
NO. LENGTH NO.
2238 4.00 (101.6) 2241
2239 6.00 (152.4) 2242
2240 8.00 (203.2) 2243
• Fully Assembled • Rigid Assembly •Ideal for rugged applications, made of high impact molded plastic with integral wire lead strain relief
Rigidly constructed. Nickel plate, male and female contacts. Female contacts are spring temper. Accepts numerous in-
sertions to meet U.L. approved standards. Provides excellent mechanical strength and low contact resistance. Wires
have tinned copper conductors, PVC insulation and the ends are stripped for easy connection.
Wires are rated to +176°F (+80°C) and 300V and meet UL/CSA #1061/#1007 requirements.
Modifications available with different wire lengths.
SPECIFICATIONS
Contacts: Phosphor Bronze, Nickel Plate
Wire: #26 AWG, 7/34
End Strip: .250 (6.4) Long, Tinned
Base: Polypropylene
*Tolerance on lead length +/-.250 (6.4)
Base Size:
1.062 (27.0) .512 (13.0)
Base Size:
1.00 (25.4) .512 (13.0)
2241
2242
2243
2238
2239
2240
ISTYLE TSTYLE
MOLDED VINYL MOLDED VINYL
CAT. CAT. *LEAD CAT. CAT.
NO. NO. LENGTH NO. NO.
232-M 232 4.00 (101.6) 235-M 235
233-M 233 6.00 (152.4) 236-M 236
234-M 234 8.00 (203.2) 237-M 237
ISTYLE TSTYLE
When product cost is of the utmost importance these economy battery straps will suit your needs. Brass con-
tacts, nickel plated with vinyl or ABS covering. Wires have tinned copper conductors, PVC insulation and the
ends are stripped for easy connection. Wires meet UL/CSA #1007 requirements.
Modifications available with different wire lengths
• Fully Assembled • Rigid Assembly
Vinyl Base Size:
1.125 (31.8) .530 (13.5)
Vinyl Base Size:
1.000 (24.5) .528 (13.4)
SPECIFICATIONS
Contacts: Brass, Nickel Plate
Wire: #26 AWG, 7/34
End Strip: .250 (6.4) Long, Tinned
*Tolerance on lead length +/-.250 (6.4)
Molded ABS Base Size:
.984 (25.0) .469 (11.9)
(Strain Relief)
Molded ABS Base Size:
.965 (25.0) .469 (11.9)
(Strain Relief)
232-M
233-M
234-M
232
233
234
235-M
236-M
237-M
235
236
237
PREMIUM 9 VOLT BATTERY STRAPS
•Protects 9 Volt batteries and battery packs when they are not in use
•Snap-fits onto battery contacts
•Both male and female contacts are covered, minimizing physical damage
which can occur during battery handling, shipping and storage
•Shields the battery contacts and reduces the potential of a short circuit
between battery poles
•Protects sensitive electronic equipment, systems and circuits, cap prevents
unwanted electrical discharges
•Protects the battery contacts from damage due to dust, dirt and contamination
MATERIAL:
Impact Resistant Polypropylene, Black
.960 [24.4]
.500 [12.7]
.120 [3.1]
.375 [9.5]
CAT. NO. 96
• Space saving, economical • Excellent mechanical strength • Low contact resistance
• Durable fibre base • Wave solderable • Anti-Wicking Design
.500 [12.7]
1.025 [26.0]
.535 [13.6]
Mounting Detail
SPECIFICATIONS
Base: .062 (1.57) thick Fibre
Contacts: Steel, Nickel Plate
• Cost saving design • Ideal for custom applications
• Attach your own terminals and wire leads
CAT. NO. 68 (without PC Pins)
1.025 [26.0]
.500 [12.7]
.535 [13.6]
L
.080 [2.05]
SPECIFICATIONS
Base: .062 (1.57) thick Fibre
Contacts: Steel, Nickel Plate
Pins: Brass, Tin Plate
L
CAT. NO. LENGTH
967 (with PC Pins) .120 (3.0)
968 (with PC Pins) .400 (10.2)
9 VOLT BATTERY STRAPS & CONTACTS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®29
Base Size:
1.025 (26.0) .535 (13.6)
.062 (1.57) thick
Contacts: Steel, Nickel Plate
Wire: #22 AWG, 7/30 Prebond
End Strip: .375 (9.5) Long, Tinned
Cover Size:
.900 (22.9) .575 (14.6)
Contacts: Steel., Nickel Plate
Wire: #22 AWG, 7/30 Prebond
End Strip: .375 (9.5) Long, Tinned
I- STYLE
CAT. *LEAD
NO. LENGTH
68 NONE
72-4 4.00 (101.6)
72 7.00 (177.8)
72-8 8.00 (203.2)
CAT. *LEAD
NO. LENGTH
83-4 4.00 (101.6)
83 6.50 (165.1)
83-8 8.00 (203.2)
Cover Size:
.900 (22.9) .575 (14.6)
Contacts: Steel., Nickel Plate
Wire: #22 AWG, 7/30 Prebond
End Strip: .375 (9.5) Long, Tinned
T- STYLE
CAT. *LEAD
NO. LENGTH
85-4 4.00 (101.6)
85-6 6.50 (165.1)
85-8 8.00 (203.2)
PREMIUM 9 VOLT BATTERY STRAPS
*Tolerance on lead length +/-.250 (6.4)
•Fully Insulated
•Flexible assembly
*Tolerance on lead length +/-.250 (6.4) *Tolerance on lead length +/-.250 (6.4)
VERTICAL 9 VOLT PC SNAP-ON CONTACT 9 VOLT SNAP-ON CONTACT
SPECIFICATIONS
Contacts: Steel, Nickel Plate
Wire: #22 AWG, 7/30 Prebond
End Strip: .375 (9.5) Long, Tinned
CAT. *LEAD
NO. LENGTH
227 7.00 (177.8)
DUAL 9 VOLT BATTERY STRAP
This dual battery strap is pre-wired for connecting two 9 Volt batteries. Base made
from fibre material with steel, nickel plated contacts. Wires have tinned copper con-
ductors, PVC insulation and the ends are stripped for easy connection. Wires meet
UL/CSA #1061 requirements.
*Tolerance on lead length +/-.250 (6.4)
.079 [2.00] DIA.
(2) PLS
.212 [5.4]
.062 [1.55]
.900 [22.9]
.500 [12.7]
1.100 [28.0]
BLACK RED
.700
[17.8]
PROTECTIVE BATTERY CAP
.500
[12.7]
.086 [2.20] DIA.
(2) PLS
FIBRE BASE
FIBRE BASE
PARALLEL
HORIZONTAL 9 VOLT PC SNAP-ON CONTACTS
9 VOLT BATTERY CONTACTS
30
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
HORIZONTAL 9 VOLT PC LEAF-SPRING CONTACT
To Mount Battery “On” PC Board
Use Cat. No. 593 and Cat. No. 594
Mounting Detail for Two Contacts
To Mount Battery “Off” PC Board
Use Cat. No. 635 and Cat. No. 636
•Space saving design installs directly onto the PC board • Suitable for .062 (1.57) to .093 (2.36) thick PC boards • Ideal for self-contained battery compartments
MATERIAL: Frame: .015 (.38) Steel, Tin Plate; Contacts: Steel, Nickel Plate
MATERIAL: .012 (.30) Spring Steel, Tin-Nickel Plate
.550
[14.0]
.120 [3.0]
.062 [1.55]
(3) PLS
.350 [8.9]
.380 [9.7] .156
[4.0]
.045 [1.15] .047 [1.20]
.450 [11.4]
.120 [3.0]
.160 [4.1]
REF.
.200 [5.1]
.360 [9.1]
.250 [6.3]
.150 [3.8]
.416 [10.6]
REF.
.125 [3.2]
.325 [8.2]
REF.
.550
[14.0]
.350 [8.9]
.380 [9.7]
.156
[4.0]
.062 [1.55]
(3) PLS
.120 [3.0]
.380 [9.7]
.410 [10.4]
.100 [2.5]
(3) PLS
.180 [4.6]
.190 [4.8]
.265
[6.7]
.180 [4.6]
.380 [9.7]
.100 [2.5]
(3) PLS
.190 [4.8]
.410 [10.4]
.265
[6.7]
.365 [9.3]
.118 [3.0]
.070 [1.80]
DIA. TYP.
.500 [12.7]
Mounting Detail for Two Contacts
Mounting Detail for Two Contacts
.225 [5.7]
.030 [.75]
TYP. .415 [10.5]
.110 [2.8]
TYP.
.500 [12.7]
.500 [12.7]
.052 [1.30]
DIA. TYP.
.120 [3.0]
.365 [9.3]
CAT. NO. 590
CAT. NO. 593 (Male) CAT. NO. 594 (Female) CAT. NO. 636 (Female)CAT. NO. 635 (Male)
• Reliable leaf-spring assures low contact resistance
• Ideal for self-contained battery compartments
• Snap-in mounting legs holds contact secure during
wave soldering
•Ideal “Slide-In” contact for easy installation and removal
of 9 Volt batteries
•Space saving design installs directly onto the PC board
•Suitable for .062 (1.57) to .093 (2.36) thick PC boards
CAT. FIG
NO. NO. DIA H L SIZE MATERIAL
263* 3 .225 (5.7) .170 (4.3) .790 (20.1)
Junior Stud: Steel, Nickel Plate
271* 4 .205 (5.2) .200 (5.1) .790 (20.1) Lug: Brass, Tin Plate
264 3 .283 (7.2) .185 (4.7) .840 (21.3) Senior Stud: Brass, Nickel Plate
272 4 .265 (6.7) .185 (4.7) .835 (21.2) Lug: Brass, Tin Plate
*Use Jr. Socket and stud for standard 9 Volt Battery DIMENSIONS ARE FOR REFERENCE ONLY *Use Jr. Socket and stud for standard 9 Volt Battery
BATTERY SNAP-ONS
For most electronic applications requiring a quick connect and disconnect of circuit. Commonly used with 9 Volt or other batteries designed with snap fasteners. Ideal for
temporary or permanent means of connecting without soldering. Can be cascaded together for multiple connections.
FIG. 1 FIG. 2 FIG. 4
FIG. 3
Stud only Stud w/Crimp Lug
Socket only Socket w/Crimp Lug
CAT. FIG
NO. NO. DIA H B HOLE SIZE MATERIAL
261* 1 .224 (5.7) .135 (3.4) .312 (7.9) .097 (2.5) Junior* Steel, Nickel Plate
269* 2 .210 (5.3) .150 (3.8) .250 (6.4) .096 (2.4)
262 1 .283 (7.2) .143 (3.6) .423 (10.7) .125 (3.2) Senior Brass, Nickel Plate
270 2 .261 (6.6) .145 (3.7) .312 (7.9) .125 (3.2)
DIA DIA
DIA
H
L
DIA
L
H
H
BB
H
Mounts Directly to Printed Circuit Board
“Off-Board”
“Off-Board”
SOCKET OR STUD W/CRIMP LUGSOCKET OR STUD ONLY
ALUMINUM 9 VOLT BATTERY HOLDERS
PC Terminals Quick-Fit Terminals
MOLDED 9 VOLT BATTERY HOLDERS
Holds any size, any shape, standard 9 Volt battery.
Eliminates need to specify an exact battery brand,
size or shape. Ideal for power source or memory
back-up use in PLC, telecommunications, data
processing, security systems, clocks, radios,
toys and appliances.
•Male-female snap-in terminals assure positive
contact and proper polarity
•Durable, rugged construction
•Excellent spring retention — holds battery
in place
•Withstands severe shock and vibration
•Operating temperature range:
-40°F to +266°F (-40°C to +130°C)
•Impervious to most industrial solvents
L
1.900 [48.3]
.128 [3.25] DIA. (4) PLS
.875 [22.2]
.218 [5.5]
1.125
[28.6]
[12.7]
.500
.500
[12.7]
.750
[19.1]
1.125 [28.6]
H
.500
[12.7]
H
1.125
[
28.6
]
9 VOLT HOLDERS
31
.450
[11.4]
.187 [4.8] TAB
.205 [5.2] TAB
SPECIFICATIONS
Body: Molded from high impact,
Glass Filled Nylon
Terminals: Brass, Tin Plate
Contacts: Steel, Nickel Plate
2.120 [53.9]
.875 [22.2]
.500
[12.7]
.600
[15.2]
.130 [3.3] DIA.
(4) PLS
.938
[23.8]
1.164
[29.6]
2.000 [50.8]
.128 [3.3] DIA. (4) PLS
.875 [22.3]
.312 [7.9]
1.125
[28.6]
.500
[12.7]
POLARIZING WASHER
(+) BATTERY SIDE
1.375 [34.9]
.500
[12.7]
.562
[14.3]
1.125 [28.6] .500
[12.7]
.750
[19.1]
1.125 [28.6]
.562
[14.3]
SPECIFICATIONS
Frame: Aluminum
Solder Terminals: Brass, Tin Plate
PC Terminals: Brass, Tin Plate
Contacts & Clips: Steel, Nickel Plate
Insulation: Resin Impregnated
Polarizing Washer: Polyethylene
For use with standard 9 Volt battery. Battery snaps in place to insure positive
contact. Ideal where severe shock and vibration are encountered. Available with
standard solder lugs or printed circuit lugs.
PC TerminalsSolder Terminals
1294
1295
Mounting Detail
1291-79
1290-79
1290 1291
303-P
203-P
CAT. NO. 1294 CAT. NO. 1295
CAT. NO. 203-P CAT. NO. 303-P
.750
[19.1]
.800
[20.3]
•Slide-in battery for
quick installation
and replacement
• Polarity clearly marked
.875 [22.2]
.938
[23.8]
.500 [12.7]
.130 [3.3]
(4) PLS.
.080 [2.0]
(2) PLS.
.600 [15.2]
1.625
[41.3]
.875
[22.2]
.500 [12.7]
.130 [3.3]
(4) PLS.
.080 [2.0]
(2) PLS.
L
Mounting Detail
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. CAT. NO. H L BATTERY REFERENCE DESCRIPTION
1291 1290 .718 (18.2) 1.375 (34.9) Alkaline Low Profile
1291-79 1290-79 .812 (20.6) 1.375 (34.9) Alkaline Snap Fit
1291-66 1290-66 .857 (21.8) 1.250 (31.8) Lithium-Ion Snap Fit
REFER TO PAGE 8 & 10 FOR PART DIMENSIONS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
32
BATTERY CONTACTS LAYOUT & MOUNTING DETAILS
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION.
“L” DIMENSION
CAT. For “AAA” For “N” For “A23” For “AAAA”
NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4)
5230 1.96 (49.8) 1.35 (34.3) 1.31 (33.3) 1.86 (47.2)
5330
207
5231
5331
5232
5330
206
53
553
56
556
57
557
“L” DIMENSION
CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA”
NO. 0.56 (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6)
53 2.05 (52.1) 1.38 (35.1) 1.04 (26.4) 1.04 (26.4)
553
“L” DIMENSION
CAT. For “AAAA” For “A27”
NO. 0.33 (8.4) 1.67 (42.4) 0.300 (7.6) 10 (28.0)
50 0.89 (22.6) 0.32 (8.1)
550
.124 [3.1] MIN.
.890 [22.6] .360 [9.1]
MIN.
.360 [9.1]
MIN.
Mounting Detail
.200 [5.1]
MIN.
'L' DIM.
.156 [4.0]
MIN.
.092
[2.3]
MIN.
.156
[4.0]
MIN.
.671 [17.0]
MIN.
Pad Layout
.200 [5.1]
MIN.
'L' DIM.
.156 [4.0]
MIN.
.092
[2.3]
MIN.
.156
[4.0]
MIN.
.662 [16.8]
MIN.
Pad Layout
'L' DIM.
.613 [15.6]
MIN.
.156
[4.0]
MIN.
.092
[2.3]
MIN.
.156 [4.0]
MIN.
.200 [5.1]
MIN.
Pad Layout
.200 [5.1]
MIN.
'L' DIM.
.300
[7.6]
MIN.
.300
[7.6]
MIN.
Pad Layout
.128 [3.25] DIA.
'L' DIM. .375
[9.5]
.375
[9.5]
Pad Layout
50
550
“L” DIMENSION
CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA”
NO. 0.56 (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6)
57 1.90 (48.3) 1.23 (31.2) 0.97 (24.6) 0.89 (22.6)
“L” DIMENSION
CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA”
NO. 0.56 (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6)
5231 2.38 (60.5) 1.71 (43.4) 1.53 (24.6) 1.37 (34.8)
5331
“L” DIMENSION
CAT. For “AAA” For “N” For “A23”
NO. 0.41 (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.4 (10.2) 1.10 (27.9)
56 1.7 (43.2) 1.1 (27.9) 1.05 (26.7)
556
55
555
“L” DIMENSION
CAT. For “AAA” For “N” For “A23”
NO. 0.41 (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.40 (10.2) 1.10 (27.9)
55 1.80(45.7) 1.20 (30.5) 1.15 (29.2)
555
CAT. BATTERY DIM.
NO. CELL REFERENCE “L” DIMENSION
206 For “AA” 0.56 (14.2) 1.98 (50.3) 1.10 (27.90)
207 For “C” 1.00 (25.4) 1.97 (50.0) 0.81 (20.60)
208 For “D” 1.30 (33.0) 2.42 (61.5) 1.25 (31.80)
“L” dimensions reflect initial insertion deflection.
Mounting Detail
.055 [1.4] DIA. HOLE
'L' DIM.
.236
[6.0]
.236
[6.0]
Mounting Detail
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION.
REFER TO PAGE 9 FOR PART DIMENSIONS
52
82
92
2915
51
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.070 [1.8]
DIA. HOLE
'L' DIM.
.118 [3.0]
.365 [9.3]
Mounting Detail
Mounting Detail
.052 [1.3]
DIA. HOLE
'L' DIM.
.120 [3.0]
.350 [8.9]
Mounting Detail
.110 [2.8]
DIA. HOLE.
'L' DIM.
.156 [4.0]
.395 [10.0]
595
628
637
629
596
597 590
591
BATTERY CONTACTS LAYOUT & MOUNTING DETAILS
33
“L” DIMENSION
CAT. For “2/3 A” For “CR2”
NO. 0.67(17.0) 1.36 (34.5) 0.60 (15.2) 1.05(26.7)
595 with 628 1.46 (37.1) 1.18 (30.0)
“L” DIMENSION
CAT. For “AA” For “AAA” For “1/2AA” For “N” For “A23”
NO. 0.56 (14.2) 1.98(50.3) 0.41(10.4) 1.75(44.5) 0.56(14.2) 0.97(24.6) 0.45(11.4) 1.14(29.0) 0.40 (10.2) 1.10(27.9)
637 with 629 2.11 (53.9) 1.88 (47.8) 1.10 (27.9) 1.27 (32.3) 1.23 (31.2)
.068 [1.7] DIA. HOLE
'L' DIM.
.300
[7.6]
.300
[7.6]
“L” DIMENSION
CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA”
NO. 0.56(14.2) 1.98(50.3) 0.67 (17.0) 1.36(34.5) 0.60 (15.2) 1.05(26.7) 0.56(14.2) 0.97(24.6)
596 with 590 2.07 (52.6) N/A 1.14 (29.0) 1.06 (26.9)
590 with 590 2.15 (54.6) 1.50 (38.1) 1.22 (31.0) 1.14 (29.0)
“L” DIMENSION
CAT. For “AAA” For “N” For “A23”
NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40 (10.2) 1.10 (27.9)
597 with 591 1.83 (46.5) 1.22 (31.0) 1.18 (30.0)
591 with 591 1.91 (48.5) 1.30 (33.0) 1.26 (32.0)
.072 [1.8] DIA. HOLE
.200 [5.1]
.300
[7.6]
.300
[7.6] 'L' DIM.
Mounting Detail
“L” DIMENSION
CAT. For “AAA” For “N” For “A23”
NO. 0.41 (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.40 (10.2) 1.10 (27.9)
82 1.08 (27.4) 0.47 (11.9) 0.43 (10.9)
“L” DIMENSION
CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA”
NO. 0.56 (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6)
52 1.32 (33.5) 0.67 (17.0) 0.39 (9.9) 0.31 (7.9)
92 1.32 (33.5) — N/A 0.31 (7.9)
2915 1.32 (33.5) — N/A 0.31 (7.9)
“L” DIMENSION
CAT. For “18650” For “2/3 A”
NO. 0.71 (18.4) 2.56 (65.0) 0.67 (17.0) 1.36 (34.5)
54 1.85 (47.0) 0.57 (14.5)
“L” DIMENSION
CAT. For “AAAA” For “A27”
NO. 0.33 (8.4) 1.67 (42.4) 0.300 (7.6) 1.10 (28.0
51 1.07 (27.2) 0.50 (12.7)
54
“L” dimensions reflect initial insertion deflection.
REFER TO PAGES 12 & 13 FOR PART DIMENSIONS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
BATTERY CONTACTS LAYOUT & MOUNTING DETAILS
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION.
204 238 202 295, 296 294
Fig. 1 Spring-Button
“L” dimensions reflect initial insertion deflection.
Fig. 2 Spring-Spring
“L” dimensions reflect initial insertion deflection.
“L” dimensions reflect initial insertion deflection.
“L” dimensions reflect initial insertion deflection.
.060 [1.5]
.070 [1.8]
'L' DIM.
(INSIDE)
.060 [1.5]
.070 [1.8]
'L' DIM.
(INSIDE)
209 228 288, 210 290, 291 292
“L” DIMENSION
FIG. For “AAA” For “N” For “12 V” For “AAAA”
CAT. NO. NO. 0.41(10.4) 1.75(44.5) 0.45 (11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33 (8.4) 1.67(42.4)
204 with 238 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5)
204,238 with 295, 296 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5)
202 with 294 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5)
204 with 204 2 1.97 (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0)
204 with 202 2 1.97 (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0)
“L” DIMENSION
FIG. For “AA” For “1/2 AA” For “CR2” For “2/3 A”
CAT. NO. NO. 0.56 (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5)
209 with 228 1 2.13 (54.1) 1.12 (28.4) 12.0 (30.5) 1.46 (37.1)
209, 228 with 290, 291 1 2.13 (54.1) 1.12 (28.4) N/A N/A
288, 210 with 292 1 2.13 (54.1) 1.12 (28.4) N/A N/A
209 with 209 2 2.27 (57.7) 1.26 (32.0) 1.34 (34.0) 1.60 (40.6)
209 with 288, 210 2 2.27 (57.7) 1.26 (32.0) N/A N/A
“L” DIMENSION
CAT. For “AAA” For “N” For “12 V” For “AAAA”
NO. 0.41(10.4) 1.75(44.5) 0.45 (11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4)
1021-1 1.96 (49.8) 1.35 (34.3) 1.31 (33.3) 1.88 (47.8)
108-2 1.99 (50.5) 1.38 (35.0) 1.34 (34.0) 1.91 (48.5)
'L' DIM.
(OUTSIDE)
'L' DIM.
(OUTSIDE)
EDGE OF
BOARD
'L' DIM.
.055 [1.39]
DIA. (2) PLS
.175 [4.4]
109-2
109-3 109-2
109-3
1017-1
1021-1
5209
5206
5208
5205
230-1
34
“L” DIMENSION
CAT. For “AA” For “1/2 AA” For “CR2” For “2/3 A”
NO. 0.56 (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5)
109-2 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4)
109-3 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4)
1017-1 2.19 (55.6) 1.18 (29.9) 1.26 (32.0) 1.52 (38.6)
108-2 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4)
“L” DIMENSION
CAT. For “AA” For “1/2 AA” For “CR2” For “2/3 A”
NO. 0.56 (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5)
5205 2.28 (57.9) 1.27 (32.3) 1.35 (34.3) 1.61 (40.8)
5205 with 5206 2.28 (57.9) 1.27 (32.3) N/A N/A
5209 2.34 (59.4) 1.33 (33.8) 1.41. (35.87) 1.67 (42.4)
5209 with 5208 2.34 (59.4) 1.33 (33.8) N/A N/A
“L” DIMENSION
CAT. For “AAA” For “N” For “12 V” For “AAAA”
NO. 0.41(10.4) 1.75(44.5) 0.45 (11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4)
230-1 1.73 (43.9) 1.12 (29.0) 1.08 (27.9) 1.65 (42.4)
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION.
REFER TO PAGE 14 THRU 16 FOR PART DIMENSIONS
Tel (718) 956-8900
•
Fa(718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
BATTERY CONTACTS LAYOUT & MOUNTING DETAILS
35
“L” DIMENSION
FIG. For “AAA” For “N” For “12V” For “AAAA”
CAT. NO. NO. 0.41(10.4) 1.75(44.5) 0.45 (11.4) 1.14(29.0) 0.40 (10.2) 1.10(27.9) 0.33 (8.4) 1.67(42.4)
5203 with 5225 1 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5)
5204 with 5226 1 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5)
5214, 5213 with 5203, 5225 2 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5)
“L” DIMENSION
FIG. For “AA” For “1/2 AA” For “2/3 A”
CAT. NO. NO. 0.56(14.2) 1.98(50.3) 0.56(14.2) 0.97(24.6) 0.67(17.0) 1.36(34.5)
5202 with 5224 1 2.23 (56.6) 1.22 (31.0) 1.61 (40.9)
5222 with 5221 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1)
5201 with 5223 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1)
5220 with 5219 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1)
5201, 5223 with 5210, 5211 2 2.24 (56.9) 1.23 (31.2) N/A
5222, 5221 with 5212 2 2.24 (56.9) 1.23 (31.2) N/A
5220, 5219 with 5217, 5218 2 2.24 (56.9) 1.23 (31.2) N/A
5227 with 5228 2 2.24 (56.9) 1.23 (31.2) N/A
“L” DIMENSION
FIG. For “C” For “D”
CAT. NO. NO. 0.99(25.0) 1.97(50.0) 1.30(33.0) 2.24(56.9)
5240 with 5241 1 2.25 (57.2) N/A
5250 with 5251 1 N/A 2.75 (69.9)
5240, 5241 with 5242 2 2.25 (57.2) N/A
5250, 5251 with 5252, 5253 2 N/A 2.75 (69.9)
'L' DIM.
'L' DIM.
5203
Fig. 1
Fig. 2
'L' DIM.
'L' DIM.
Fig. 1
Fig. 2
'L' DIM.
'L' DIM.
Fig. 1
Fig. 2
5225
5204 5226
5213, 5214
5201, 5220
5202, 5222
5210, 5211
5219, 5223
5221, 5224 5227
5212
5228
5240 5241
5242
5250
5252, 5253
5251
FUSE CLIPS & HOLDERS
Our comprehensive line of fuse clips, contacts and holders are ideally
suited for use in today’s industrial, electronic and automotive devices.
Applications include:
•Delicate microcircuitry
•Consumer Electronics
•Telecom and Datacom devices
•Mini, Standard & Maxi blade Automotive Fuses
•High Shock and Vibration applications
•High Amperage applications
•UL approved devices
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application.
27
FUSE CLIPS & HOLDERS
37
AUTOMOTIVE FUSE CLIPS
Low Profile...........................................39-41
Maxi............................................................38
Mini .....................................................40-41
Standard ............................................39, 41
AUTOMOTIVE FUSE HOLDERS
Low Profile...........................................39-41
Maxi............................................................38
Mini .....................................................40-41
Standard...................................38-39, 41
Cylindrical Fuse Covers .............................43
CYLINDRICAL FUSE CLIPS
5mm ...........................................................44
2AG thru 8AG ..................................44-45
5AG, Midget, SPF .....................................44
CYLINDRICAL FUSE HOLDERS
5mm ...........................................................42
3AG .................................................42-43
Midget, SPF, 5AG Fuse Holder.................43
SUBMINIATURE FUSE HOLDERS
Cylindrical, Rectangle ...............................43
MOUNTING DETAILS........................46-49
SECTION CONTENTS
MODULAR AUTOMOTIVE BLADE FUSE HOLDERS
AUTOMOTIVE BLADE FUSE CLIP & HOLDERS
•
Available for standard, mini and maxi fuse sizes
•
Horizontal and vertical mini blade clips and holders for
Littelfuse Low Profile Mini 897 series, Mini 297 or 997
series, Bussmann ATM series fuses or equivalents
•
Horizontal and vertical standard blade clips and holders
for Littelfuse ATO 257 series and Bussmann ATC series
fuses or equivalents
•
Vertical maxi blade clips and holders for Littelfuse Maxi 297
series and Bussmann MAX series fuses or equivalent.
•
Thru hole PC mountable, maintains position during
wave soldering
•
Holds fuse securely, even after multiple insertions
•
Available with orientation legs to assure proper orientation
SPECIFICATIONS
Contacts: Brass, Tin Plate
Body: Nylon
Current Rating: 30 Amps @ 500V AC
Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC)
.089 [2.26] DIA.
(2) PLS
.360 [9.2]
Mounting Detail
.650 [16.5]
.360 [9.2]
.089 [2.26] DIA.
(4) PLS
Mounting Detail
For Two Holders
•
Designed for standard auto blade fuses
•
Fully insulated compact design
•
Mounts easily in pre-drilled or
punched hole
•
Holder has pocket to hold spare fuse
•
Safety lever release clip will not open
under shock or vibration
•
Fuses are installed and removed easily
•
May be used individually or easily
interlocked for multiple mounting
.382 [9.7]
.969 [24.6]
.360 [9.2]
.417 [10.6]
.394 [10.0]
.059 [1.50]
x .075 [1.90]
(2) PLS
.890 [22.6]
1.067 [27.1]
COVER SHOWN
OPEN.
“AUTO” FUSE CLIPS & HOLDERS
38
CAT. NO. 3559 (In Line)
3559 (14 gauge
wire lead must
be cut and spliced
for in-line use)
FOR .205 (5.2) .025 (.64) STANDARD BLADE FUSES
For Littelfuse ATO 257 series/Bussmann ATC series or equivalent
For Littelfuse Maxi 297 series/Bussmann Max series or equivalent
CAT. NO. 3560 (PC Mount)
“MAXI” AUTOMOTIVE FUSE CLIP & HOLDER
.392 [10.0]
.180 [4.6]
.422
[10.7]
.375
[9.5]
.109
[2.8]
.106 [2.7]
.578
[14.7]
.180 [4.6]
.328
[8.4]
.328
[8.4]
.500
[12.7]
.152 [3.9] DIA. (4) PLS
•
Thru hole PC mountable, maintains position during wave soldering
•
Holder design prevents solder wicking
CAT. NO. 3555 CAT. NO. 3555-2
SPECIFICATIONS
Contacts: .020 (.51) Copper, Tin-Nickel Plate
Insulator: Glass filled Nylon, UL Rated 94V-0
Current Rating: 40 Amps @ 500V AC
Temperature Rating: -58ºF to+292ºF
(-50ºC to+145ºC)
.442 [11.3]
.136 [3.5]
.230 [5.9]
1.410 [35.8]
.180
[4.6]
.067
[1.70]
Mounting Detail For Two Clips
•
Withstands the rigors of shock and vibration
•
Holds fuse securely, even after multiple insertions
.156 [4.0] .125 [3.2]
.359 [9.1]
.359 [9.1]
.390 [9.9]
.140 [3.6]
.162 [4.1]
(7) PLS
.519 [13.2]
.032 [0.81]
(4) PLS
.375 [9.5]
.062 [1.57]
(2) PLS
Mounting Detail For Two Holders
.032 [0.81]
(2) PLS
.519 [13.2]
.140 [3.6]
.062 [1.57]
(2) PLS
.110 [2.8]
.162 [4.1]
(4) PLS
.282 [7.2]
.375 [9.5]
Mounting Detail
CAT. NO. 3558
•
Fully insulated fuse mount
•
Designed for standard auto blade fuses
•
Mounts easily in punched hole
•
Fuses are installed and removed easily
•
May be used individually or easily
interlocked for multiple mounting
SPECIFICATIONS
Contacts: Brass, Tin Plate
Body: Nylon
Current Rating: 30 Amps @ 500V AC
Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC)
.984 [25.0]
.519 [13.2]
REF.
.362 [9.2]
.157 [4.0]
(2) PLS .157 [4.0]
1.299 [33.0]
REF.
.375 [9.6]
.394 [10.0]
3560 (Shown with
two 3560 holders,
interlocked)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
FOR .312 (7.9) .032 (.80) MAXI BLADE FUSES
FOR .205 (5.2) .025 (.64) STANDARD BLADE FUSES
For Littelfuse ATO 257 series/Bussmann ATC series or equivalent
For Littelfuse ATO 257 series/Bussmann ATC series,
Littelfuse Low Profile Mini 897 series or equivalents For Littelfuse ATO 257 series/Bussmann ATC series,
Littelfuse Mini 297 or 997 series/Bussmann ATM series,
Littelfuse Low Profile Mini 897 series or equivalents
VERTICAL FUSE ENTRY
CAT. NO. 3522-2
CAT. NO. 3522 Tin-Nickel Plate
SPECIFICATIONS
Contacts: .016 (.41) Brass, Tin-Nickel Plate
Insulator: Glass filled Nylon, UL Rated 94V-0
Current Rating: 30 Amps @ 500V AC
Temperature Rating: -58ºF to +292ºF
(-50ºC to +145ºC)
CAT. NO. 3522-3
•
Holds fuse securely, even after multiple insertions
•
Thru hole-mount, maintains position during wave soldering
•
Withstands the rigors of shock and vibration
•
Holder design prevents solder wicking
Mounting Detail For Two Clips
.200
[5.1]
.160 [4.1]
.100 [2.6] DIA. (4) PLS
.200
[5.1]
Mounting Detail For Two Clips
.200 [5.1] (3) PLS.
.100 [2.6] DIA. (4) PLS
.160 [4.1] (2) PLS.
.212
[5.40]
.062
[1.55]
.240 [6.10]
.100 [2.55]
.180 [4.55]
.098 [2.50]
.400 [10.15]
.062
[1.55]
.250
[6.35]
.400
[10.2]
.363 [9.2]
.104 [2.64]
DIA. (2) PLS
Mounting Detail For Two Clips
.393 [10.0]
.400 [10.2]
.062 [1.6]
(2) PLS
.363 [9.2] .820 [20.8]
.145 [3.7]
.245 [6.2]
.100 [2.6]
(2) PLS
CAT. NO. 3550CAT. NO. 3550-2
SPECIFICATIONS
Contacts: .012 (.30) Brass, Nickel Plate
Insulator: Nylon, UL Rated 94V-0
Current Rating: 15 Amps @ 500V AC
Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC)
HORIZONTAL FUSE ENTRY
•
Designed for low height clearance applications
•
Fuse will be inserted parallel to board
•
Thru hole mount, maintains position during wave soldering
•
Fuse holder fully insulates clips to protect fuse from shorting
•
Holder assures proper spacing and reduces assembly time
•
Polarized legs assure proper orientation of clips onto board
•
Low insertion force
•
Fuse holder fully insulates clips to protect fuse from shorting
•
Holder assures proper spacing and reduces assembly time
•
Thru hole PC mountable, maintains position during wave soldering
•
Accepts most Auto-Blade Fuses
•
Low insertion force
•
Thru hole PC mountable, maintains position
during wave soldering
Mounting Detail
.185 [4.7]
.150 [3.8]
.134 [3.4]
.400 [10.2]
.150 [3.8] .062 [1.57]
.027 [0.69]
.130 [3.3]
.062 [1.57] (2) PLS
.134
[3.4]
.530 [13.5]
.110 [2.8]
.780 [19.8]
.290 [7.4]
.265 [6.8]
3522-2 3522-3
SPECIFICATIONS
Contacts: .016 (.41) Brass, Tin-Nickel Plate
Insulator:Nylon 4/6, UL Rated 94V-0
Current Rating: 20 Amps @ 500V AC
Temperature Rating:
-58ºF to +292ºF (-50ºC to +145ºC)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
2 IN 1 FUSE HOLDER UNIVERSAL CLIP
CAT. NO. 3557-2 CAT. NO. 3577 - Bottom Entry
CAT. NO. 3557 - Top Entry
.070
[1.78]
.125
[3.2]
.281
[7.2]
.437
[11.1]
.076 [1.92]
.271 [6.9]
.250
[6.4]
.134 [3.4]
W
.063 [1.60] DIA. (4) PLS
STANDARD AUTOMOTIVE BLADE FUSE CLIPS & HOLDERS
“AUTO” FUSE CLIPS & HOLDERS
39
.134 [3.4]
.063 [1.6] DIA. (4) PLS
.530 [13.5]
Mounting Detail
CAT. NO. 3573 Matte Tin Plate
Mounting Detail For Two Clips
.200
[5.1]
.100 [2.6] DIA. (4) PLS
.200
[5.1]
.160 [4.1]
.175 [4.5]
.300 [7.6]
.137 [3.5]
.050
[1.27]
.125
[3.2]
.760 [19.3]
.175 [4.5]
.300 [7.6]
.100 [2.6]
.050
[1.27]
.125
[3.2]
.260 [6.6]
1.125 [28.6]
.156 [4.0]
REF.
.102 [2.6]
.054 [1.4]
.292 [7.4]
.200
[5.1]
.150 [3.8]
.330 [8.4]
SPECIFICATIONS
Contacts: .016 (.41) Brass
Current Rating: 20 Amps @ 500 VAC
VERTICAL ENTRY LOW INSERTION FORCE
Fuse W
Mini .383 (9.7)
Standard .530 (13.5)
“AUTO” FUSE CLIPS & HOLDERS
40
.280 [7.1] .156 [4.0]
.070 [1.80]
.040
[1.00] .400 [10.2]
.075 [1.90]
.100 [2.6]
.062
[1.55]
.212
[5.4]
.091 [2.30]
.244 [6.2]
.236 [6.0]
.079 [2.00]
.197 [5.0]
.320 [8.2]
.270
[6.9] .120 [3.1] DIA.
(2) PLS
.094 [2.4] DIA.
(4) PLS
MATERIAL:
.016 (.41) Brass, Matte Tin Plate
Current Rating: 15 Amps @ 500V AC
Mounting Detail
For Two Clips
.075 [1.90]
.086 [2.20]
.062 [1.55]
.440 [11.2]
.144 [3.7]
.125 [3.2]
.156 [4.0]
.196
[5.0]
Mounting Detail For Two Clips
.100 [2.6]
.578 [14.7]
.125 [3.2]
.138
[3.5]
.340 [8.7]
.187 [4.8]
.176 [4.5]
.144
[3.7]
.065 [1.65] DIA. (4) PLS
.144
[3.7]
Mounting Detail For Two Clips
VERTICAL FUSE ENTRY
MINI FUSE HOLDERLOW PROFILE MINI FUSE HOLDER
Surface MountThru Hole Mount
.400 [10.2]
.250 [6.4]
.125 [3.2] .091 [2.30]
.125 [3.2]
.236 [6.0]
.079 [2.00]
(2) PLS
.120 [3.1] DIA.
.320 [8.2]
.091 [2.30]
MIN. TYP. .400 [10.2]
MIN.
.125 [3.2]
•Low Profile
•Low Profile
AVAILABLE ON TAPE AND REEL
.406 [10.3]
.700 [17.8]
.394
[10.0]
.070 [1.8]
(2) PLS
.295 [7.5]
.040 [1.0]
(2) PLS
.145 [3.7]
.228 [5.8]
.400
[10.2]
.295 [7.5]
.076 [1.93]
DIA. (2) PLS
.046 [1.17]
DIA. (2) PLS
Mounting Detail
.134
[3.40]
.390
[9.9]
.063 [1.60]
DIA. (4) PLS
Mounting Detail
.134 [3.4]
.063 [1.60] DIA. (4) PLS
.530 [13.5]
Pad Layout
For Two Clips
HORIZONTAL FUSE ENTRY
CAT. NO. 3549 Nickel Plate
CAT. NO. 3564
CAT. NO. 3563 (Bulk)
CAT. NO. 3549-2 Tin Plate
SPECIFICATIONS
Material: .012 (.30) Brass
Insulator: Glass filled Nylon, UL Rated 94V-0
Current Rating: 15 Amps @ 500V AC
Temperature Rating: -58°F to+292°F (-50°C to+145°C)
CAT. NO. 3563TR (Tape & Reel)
For .110 (2.8) .032 (.80) MINI BLADE FUSES
For Littelfuse Mini 297 or 997 series/Bussmann ATM series or equivalent
For Littelfuse Low Profile
Mini 897 series or equivalent
For Littelfuse Mini 297 or
997 series/Bussmann ATM
or equivalents
Tape & Reel Spec’s: 24mm wide; 12mm pitch;
13 inch reel (1500 pieces per reel)
“MINI” AUTOMOTIVE FUSE CLIPS & HOLDERS
SPECIFICATIONS
Contacts: .012 (.30) Brass
Insulator: Nylon 6/6, UL Rated 94V-0
Current Rating: 15 Amps @ 500V AC
Temperature Rating: -58°F to+292°F (-50°C to+145°C)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•
Low insertion force
•
Thru hole PC mountable, maintains position during wave soldering
•
Fuse holder fully insulates clips to protect fuse from shorting
•
Holder assures proper spacing and reduces assembly time
CAT. NO. 3557-2 CAT. NO. 3568
Refer to page 39
for Cat. No. 3557
Clip details
.062 [1.57] (2) PLS
.134
[3.4]
.530 [13.5]
.110 [2.8]
.780 [19.8]
.290 [7.4]
.265 [6.8] .265 [6.73]
.630 [16.00]
.110 [2.79]
.390 [9.9]
.062 [1.57] TYP
.290 [7.37]
.134
[3.41]
SPECIFICATIONS
Contacts: .016 (.41) Brass,
Tin-Nickel Plate
Insulator: Nylon 4/6, UL Rated 94V-0
Current Rating: 20 Amps @ 500V AC
Temperature Rating: -58°F to+292°F
(-50°C to+145°C)
For Littelfuse Mini 297 or 997 series/Bussmann ATM series or equivalent
CAT. NO. 3544 Tin-Nickel Plate CAT. NO. 3544-2 Tin Plate
•
Compatible with most vacuum and mechanical pick and
place assembly systems.
•
Accepts standard and mini blade automotive
blade fuses.
•
Clip with Matte-Tin plate is ideal for low temperature
soldering applications, for other temperature sensitive
components.
•
Clips with Tin-Nickel plate are ideal for lead free,
high temperature soldering applications.
•
Compatible with most vacuum and mechanical pick and place assembly systems.
•
Fully insulated clips to protect fuses against shorting.
•
One piece assembly reduces assembly time
•
Withstands shock and vibration.
Pad Layout For Two Clips
.185
[4.7]
.150
[3.8]
.242
[6.14]
.282
[7.2]
.100 [2.5]
.062 [1.6]
.062 [1.6]
SPECIFICATIONS
Material: .016 (.41) Brass,
Matte Tin Plate
Current Rating: 15 Amps @
500V AC
SPECIFICATIONS
Material: .016 (.41) Brass,
Tin-Nickel Plate
Current Rating: 20 Amps @
500V AC
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
VERTICAL ENTRY VERTICAL ENTRY
For Mini: Littelfuse: MIN series/Bussmann ATM series or equivalent For Mini: Littelfuse: MIN series/Bussmann ATM series or equivalent
CAT. NO. 3586 (Bulk)
.120 [3.0]
DIA. (2) PLS.
.320 [8.1]
.092
[2.3]
TYP.
.400
[10.2]
.125
[3.2]
SMT “AUTO” BLADE FUSE CLIPS
SMT “AUTO” BLADE FUSE HOLDERS
.325 [8.3]
.345 [8.8]
.630 [16.0]
.290 [7.4]
.062 [1.6] TYP.
.390
[9.9]
.111 [2.8]
.062 [1.6]
.350
[8.8]
.390
[9.9]
Mounting Detail
HORIZONTAL ENTRY
2 in 1 FUSE HOLDER MINI FUSE HOLDER
.325 [8.3]
.345 [8.8]
.265 [6.7]
.530 [13.5]
.290 [7.4]
.780 [19.8]
.062 [1.6] TYP.
Mounting Detail
.530
[13.5]
.111 [2.8]
.350
[8.8]
.062 [1.6]
SPECIFICATIONS
Contacts: .016 (.41) Brass, Matte Tin Plate
Insulator: High Temperature Nylon 46, UL 94V-0
Temperature Rating: -58°F to+292°F (-50°C to+145°C)
Current Rating: 20 Amps @ 500V AC
SPECIFICATIONS
Contacts: .016 (.41) Brass, Matte Tin Plate
Insulator: High Temperature Nylon 46, UL 94V-0
Temperature Rating: -58°F to+292°F (-50°C to+145°C)
Current Rating: 20 Amps @ 500V AC
.100 [2.5]
.312 [7.9]
.250 [6.4]
.075 [1.9]
.156
[4.0]
.105 [2.7]
TYP.
.090 [2.3]
L = .562 [14.3] FOR MINI FUSE
L = .750 [19.0] FOR STANDARD
.252 [6.4]
.105
[2.7]
.067
[1.7]
.067
[1.7]
.176
[4.5]
L
Pad Layout For Two Clips
.100
[2.5]
.110 [2.8]
.320 [8.1]
.312
[7.9]
Mounting Detail
For Two Clips
SPECIFICATIONS
Material: .012 (.30) Brass,
Tin-Nickel Plate
Current Rating: 15 Amps @
500V AC
CAT. NO. 3563TR (Tape & Reel)
CAT. NO. 3563 (Bulk)
Tape & Reel Spec’s:24mm wide, 12mm pitch,
13 inch reel (1500 pieces per reel)
CAT. NO. 3586TR (Tape & Reel)
CAT. NO. 3569 (Bulk)
CAT. NO. 3569TR (Tape & Reel)
Tape & Reel Spec’s:16mm wide, 12mm pitch,
13 inch reel (750 pieces per reel)
Tape & Reel Spec’s: 24mm wide, 8mm pitch,
13 inch reel (2000 pieces per reel)
CAT. NO. 3587TR (Tape & Reel)
CAT. NO. 3587 (Bulk)
Tape & Reel Spec’s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel)
CAT. NO. 3588 (Bulk)
CAT. NO. 3588TR (Tape & Reel)
Tape & Reel Spec’s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel)
For Mini: Littelfuse: MIN series/
Bussmann ATM series or equivalent
For Mini: Littelfuse: MIN series/Bussmann ATM series.
For Standard: Littelfuse: ATO series/Bussmann ATC series.
For Low Profile: Littelfuse: 891 series/Bussmann ATM-LP series
For Standard: Littelfuse: ATO series/
Bussmann ATC series.
For Low Profile: Littelfuse: 891 series/
Bussmann ATM-LP series
SMT “AUTO” FUSE CLIPS & HOLDERS
41
.400 [10.2]
.250 [6.4]
.125 [3.2] .091 [2.30]
.125 [3.2]
.236 [6.0]
.079 [2.00]
(2) PLS
5mm x 20mm FUSE HOLDERS
3AG FUSE HOLDERS
5mm & 3AG FUSE HOLDERS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.953 [24.2]
.375
[9.6]
.156 [4.0]
.047 [1.20]
.354 [9.0]
.472
[12.0]
.886 [22.5]
.130 [3.3] DIA.
•Optional cover with window protects
and insulates fuse
•Flame Retardant
SPECIFICATIONS
Base & Cover: Nylon,
UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 5 Amps @ 250V AC
.951 [24.2]
.860 [21.9]
.051 [1.30]
.382 [9.7]
.467
[11.9]
.425
[10.8]
.167 [4.3]
SPECIFICATIONS
Base & Cover: Nylon,
UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 5 Amps @ 250V AC
• Low profile, space saving design
• Optional cover protects and insulates fuse
• Flame Retardant
.900 [22.9]
.920 [23.4]
.070 [1.80]
.062
[1.55]
.500
[12.7]
.220
[5.6]
• Snap-in design for wave soldering
• Flame Retardant
• Optional cover protects and
insulates fuse - Cat. No. 3527C
SPECIFICATIONS
Base: .062 (1.57) G-10, UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 6.3 Amps @ 250V AC
SPECIFICATIONS
Base: .062 (1.57) GPO-3, UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 15 Amps @ 500VAC
SPECIFICATIONS
Base: .062 (1.57) GPO-3, UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 15 Amps @ 500VAC
SPECIFICATIONS
Base: .032 (1.57) G-10, UL Rated 94V-0
Clips: Brass, Tin Plate
Rated: 15 Amps @ 500VAC
.140 [3.6]
1.000 [25.4]
.040 [1.00]
Mounting Detail Mounting Detail
Mounting Detail
1.375 [35.0]
.300 [7.6] (2) PLS
.070 [1.78] DIA. (4) PLS
.070 [1.78] DIA. (4) PLS
.300 [7.6] (2) PLS
1.375
[
35.0
]
SLIM LINE LOW PROFILE
FULLY INSULATED PC SNAP-IN
Optional cover available - Cat. No. 4245C
Optional cover available - Cat. No. 4245COptional cover available - Cat. No. 4245C
Optional cover available - Cat. No. 4245C
CAT. NO. 4628 - Holder
CAT. NO. 4628C - Cover only (with window)
CAT. NO. 4525
Mounting Detail
.886 [22.5]
.052 [1.30] DIA. (2) PLS
Mounting Detail
.860 [21.9]
.052 [1.30] DIA. (2) PLS
Mounting Detail
.900 [22.9]
.078 [2.00] DIA. (2) PLS
CAT. NO. 3526 CAT. NO. 4245
CAT. NO. 4250
.281
[7.2]
.310
[7.9]
.450
[11.4]
.125 [3.2]
1.380 [35.1]
1.000 [25.4]
.078 [1.98]
DIA.
.140 [3.6]
DIA. HOLE
1.375 [34.9]
.060
[1.50]
.188
[4.8]
.430
[10.9]
.300 [7.6] (2) PLS
.420
[10.7]
1.375 [34.9]
.060
[1.50]
.130
[3.3]
.300 [7.6] (2) PLS
PRESS-FIT, IDEAL FOR WAVE SOLDERING
TERMINATION LUGS CAN BE USED
WITH WIRES OR PC MOUNT
SNAP-IN DESIGN ASSURES
STABILITY DURING WAVE SOLDERING
MOLDED CASE
• Supplied unassembled
• Shock resistant
• Fuse can be accessed from board edge
• Fuse is completely enclosed, protecting
use from shorting and breaking
CAT. NO. 4527- Holder
CAT. NO. 4527C - Cover only
CAT. NO. 3527- Holder
SPECIFICATIONS
Base: PBT
Contacts: Brass, Tin Plate
Rated: 10 Amps @ 250V AC
Mounting Detail
.492 [12.5]
.052 [1.30] DIA. (2) PLS
.417
[10.6]
.047 [1.20]
.413 [10.5]
DIA.
.492 [12.5]
.020 [.50]
(2) PLS
.866 [22.0]
1.142 [29.0] REF.
.089 [2.25]
.197 [5.0]
.217 [5.5]
42
.468 [11.9]
.312 [7.9]
DIA C'BORE
.144 [3.7]
DIA. HOLE
.250 [6.4]
1.650
[41.9]
.703
[17.9]
REF.
SPECIFICATIONS
Base: LCP, UL Rated 94V-0
Clips: .020 (.51) Brass -
Nickel Plated
Rated: 15 Amps @ 500 VAC
CAT. NO. 3523 Mounting Hole:
.144 (3.7) Dia.
L
W
H
.690
[17.5]
1.978[50.2]
REF.
1.695 [43.1]
.200 [5.1] .714
[18.2]
1.500 [38.1] .158 [4.0]
.690 [17.6]
.125
[3.2]
.714
[18.14]
1.695 [43.1]
BLACK FIBER- HOLDS
PHENOLIC GLASS NO. OF
CAT. NO. CAT. NO. FUSES W
3536 3540 1 .500 (12.7)
3537 3541 2 1.125 (28.6)
3538 3542 3 1.750 (44.5)
3539 3543 4 2.375 (60.3)
MIDGET, SPF (5AG) FUSE HOLDER
3AG FUSE BLOCKS
.140
[3.6]
DIA.
.250 [6.4]
.453
[11.5]
.125 [3.2]
1.625
[41.3]
W
.625 [15.9]
TYP.
• Designed for SPF (Solar Protection Fuse) • Optional cover will protect and insulate fuse • Flame resistant
•Available with fiberglass or phenolic base
•Fuse clips riveted to base for rugged applications
SPECIFICATIONS
Base & Cover: Nylon, UL Rated 94V-0
Clips: .030 (.76) Brass, Matte Tin Plate
SPECIFICATIONS
Phenolic Base: XP, Black UL Rated 94-HB
Fiberglass Base: GPO-3 UL Rated 94 V-0
Clips: .020 (.51) Brass - Nickel Plated
Rated: 15 Amps @ 500 VAC
Operating Temp. Range: -58°F to +292°F
(-50°C to +145°C)
MATERIAL: PVC, UL Listed 94V-0
MATERIAL: ABS, UL Rated 94V-0
FUSE COVERS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. 3552
CAT. NO. 3576C - Cover only
CAT. NO. 3576 - Holder
CAT. NO. 3556
.335 (8.5) .158 (4.0) FUSE
For Littelfuse 392/395 Type TE5®
Bussmann: PC Series
or equivalent
.335 (8.5) DIA. FUSE
For Littelfuse 370 Type TR5®
Bussmann: BK-EFF series
or equivalent
CAT. NO. 3553 CAT. NO. 3554
.100 [2.6]
.300 [7.6]
.121 [3.1]
.020 [.50]
DIA. (2) PLS.
.200
[5.1]
.169 [4.3]
.100 [2.6]
.300 [7.6]
.290 [7.4]
.020 [.50]
DIA. (2) PLS.
.200
[5.1]
.100 [2.6]
.374 [9.5]
DIA.
.200
[5.1]
45°
.020 [.50]
DIA. (2) PLS.
.169 [4.3]
.118 [3.0]
.374 [9.5]
DIA.
.020 [.50]
DIA. (2) PLS.
.220 [5.6]
.118 [3.0]
.200
[5.1]
45°
SUBMINIATURE FUSE HOLDERS
•
Reliable spring tension assures low contact resistance
•
Fuse holders allow for quick changing of subminiature fuses
•
Ideal for high density circuit board applications
CAT. NO. FUSE SIZE L W H
3527C 5mm 20mm .945 (24.0) .314 (8.0) .512 (13.0)
3521C 2AG .787 (20.0) .295 (7.5) .452 (11.5)
4245C 3AG 1.319 (33.5) .472 (12.0) .591 (15.0)
CAT. NO. FUSE SIZE
3517C 5mm 20mm
SPECIFICATIONS
Base: Thermoplastic, UL Rated 94V-0
Springs: Beryllium Copper, Gold Plate
Pins: Brass, Tin Plate
Current Rating: 5 Amps @ 250V AC
LOW PROFILESTURDI-MOUNT LOW PROFILESTURDI-MOUNT
.400 [10.2]
1.000 [25.4]
.428
[10.9]
.098 [2.5] DIA.
HOLE (2) PLS.
.375 [9.5]
.039 [1.00]
DIA.
.200
[5.1]
Mounting Detail
Can be used with
clips or fuse holders
FUSE HOLDERS & COVERS
43
Can be used with clips
3512, 3512P, 3517
and 3518
• Made from flame retardant material
• Protects fuse from shorting
and minor bumps
CAT. NO. 3576C - Cover only
CAT. NO. 3574 - Holder
.140 [3.6] x .050 [1.3]
1.500 [38.1]
Mounting Detail
.200 [5.1] SQR
MIN. (2) PLS
1.985 [50.4] MIN.
Mounting Detail
Rated: 30 Amps
Operating Temp. Range: -58°F to +292°F (-50°C to +145°C)
Optional Cover Cat. No. 3576C
fits Cat. No. 3576 & 3574
3574 (SMT)3576 (THM)
B
.140 [3.6]
A
.266
[6.8]
.250 [6.4]
.246
[6.3]
.343 [8.7]
.064
[1.65]
FUSE CLIPS
.200 [5.1]
.230 [5.9]
.437 [11.1]
.250 [6.4]
.085 [2.15]
.300
[7.6]
REF.
.280
[7.1]
.070 [1.80]
.040 [1.00]
.100 [2.5] DIA.
.200
[5.1]
.173 [4.4]
.140 [3.6]
.250
[6.4]
REF.
.360
[9.2]
.173 [4.4]
.047 [1.20]
.079 [2.00]
.200
[5.1]
.049 [1.24] DIA.
.343 [8.7]
.246
[6.3]
.250 [6.4]
.266
[6.8]
A
.140 [3.6]
B
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.016 (.41) Brass, Tin Plate
Current Rating: 6.3 Amps
MATERIAL:
.016 (.41) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
With or Without Orientation Legs
With or Without Orientation Legs CAT. NO. AB
3512 .060 (1.5) .060 (1.5)
3512P .060 (1.5) .093 (2.4)
CAT. NO. AB
3517 .060 (1.5) .060 (1.5)
3518P .060 (1.5) .093 (2.4)
.197
[5.00]
.240
[6.10]
.472
[12.00]
.197
[5.00]
.157 [4.00]
.396
[10.05]
.472 [12.00]
.047 [1.20]
.205
[5.20]
REF.
.067 [1.7] DIA.
(3561, 3622 ONLY)
.197
[5.00]
.148
[3.75]
.288
[7.30]
.043
[1.10]
.156
[3.95]
.165
[4.2]
WITH
PC LEGS
WITHOUT
PC LEGS
.047 [1.19] DIA.
.197
[5.00]
.205
[5.20]
.062 [1.57] DIA.
MATERIAL: .016 (.41) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.016 (.41) Brass, Tin Plate
Current Rating: 15 Amps
3521 3561
Mounting Detail
Mounting Detail
Mounting Detail
Cat. No. 3521 &
3621 Only
FUSE CLIPS
44
.416
[10.55]
.312 [7.90]
.303
[7.70]
.100 [2.55] DIA.
MATERIAL:
.020 (.51) Brass, Nickel Plate
Current Rating: 15 Amps
.413
[10.5]
.089 [2.25] DIA.
Mounting Detail
MATERIAL:
.030 (.76) Brass, Tin Plate
Current Rating: 30 Amps
5mm/3AG
5mm PC Clips
2AG or 5mm
4AG (9/32 Dia.) 5AG (13/32 Dia.) - Solar Protection Fuse
.436 [11.1]
.484 [12.3]
.079 [2.00]
.413 [10.5]
.748 [19.0]
.146 [3.7]
.135 [3.5] DIA.
CAT. NO. 3562
CAT. NO. 3520 CAT. NO. 3519
CAT. NO. 3565 (Without End Stops)*CAT. NO. 3566
•With snap-in PC legs
3517 3518P 3512 3512P
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Available for 5mm, 1AG, 2AG, 3AG, 5AG,
7AG & 8AG sizes
•Low profile, space saving
•Low contact resistance
•Withstands shock and vibration
•Rated 6.3 to 30 Amps
•Custom designs and modifications
available to your specifications
PC THRU MOUNT TYPES
•Snap-fit design enhances assembly and PC retention
for wave soldering
•Available with orientation legs to assure proper
PC installation
•Available with or without end stops
SURFACE MOUNT & RIVET TYPES
•Available with solder lugs or quick-fit tabs
.187 (4.7), .205 (5.2)
CAT. NO. PC LEGS END STOP
3521 YES YES
3621 YES NO*
3561 NO YES
3622 NO NO*
Refer to pages 46-47 for Fuse Clip Layout and Mounting Details
Optional cover available - Cat. No. 3517C Optional cover available - Cat. No. 3517C
Underwriters Laboratories, Inc.
Recognized Component Program —
UL File Number E354010
UL file number E354010 has been assigned to Keystone
Electronics’ fuse clips with end stops. (Refer to pages 44-45)
Indicating recognition by Underwriters Laboratories Inc. that
they are in compliance with their component program.
*Fuse clips without end stops are not UL recognized
CAT. NO. AB
3533 Flat .656 (16.7)
3535 45° .562 (14.3)
3570 —NO TAB
TAB
.625 [15.9]
.310 [7.9]
.280 [7.1]
.312 [7.9]
.453
[11.5]
.156 [4.0]
.135 [3.5] DIA.
A
B
.421 [10.7]
.325
[8.3]
.140 [3.6]
.300
[7.6]
.280
[7.1]
.064
[1.63]
.250 (6.4) DIAMETER FUSE CLIPS
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Nickel Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Nickel Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Tin Plate
Current Rating: 15 Amps
With or Without Orientation Legs
Mounting Detail
WITH SNAP-IN PC LEGS
WITH STRAIGHT PC LEGS
WITH QUICK-FIT TAB WITH OR WITHOUT END STOPS
WITH STRAIGHT PC LEGS
.430 [10.9]
.060 [1.50]
.175 [4.5]
.228
[5.8]
.280 [7.1]
.325
[8.5]
.098 [2.5] DIA.
.300
[7.6]
.067 [1.70] DIA.
Mounting Detail
.437 [11.1]
.335
[8.5]
.270 [6.9]
.100 [2.6]
.062 [1.55]
.312
[7.9]
.067 [1.70] DIA.
.270
[6.9]
A
B
.156 [4.0]
.453
[11.5]
.280 [7.1]
.310
[7.9]
.312
[7.9]
.135 [3.5] DIA.
.100 [2.6] DIA.
.437
[11.1]
.335
[8.5]
.136 [3.5] DIA.
NO END STOPS
3567
WITH
END STOPS
3532
WITH
.312
[7.9]
.312
[7.9]
.415
[10.6]
.130 [3.3] DIA.
.312 [7.9]
H
L
.060 [1.52]
.300
[7.6]
.325
[8.3]
WITH
3510, 3511
NO END STOPS
WITH
3514, 3529
END STOPS
.280
[7.1]
CAT. NO. AB
3515 .060 (1.5) .060 (1.5)
3515P .060 (1.5) .093 (2.4)
3516P .060 (1.5) .120 (3.0)
CAT. NO. END STOPS
3532 YES
3567 NO*
WITH SNAP-IN PC LEGS
MATERIAL:
.020 (.51) Brass, Nickel Plate
Current Rating: 15 Amps
MATERIAL:
.020 (.51) Brass, Nickel Plate
Current Rating: 15 Amps
FUSE CLIPS
CAT. NO. 3513
CAT. NO. 3530
CAT. NO. 3531 (Without End Stops)*
1AG, 3AG, 7AG, 8AG
THRU HOLE MOUNT TYPES
CAT. NO. TAB
4246 .187 (4.7)
4247 .205 (5.2)
WITH SOLDER LUG LOW PROFILE
Mounting Detail
.300
[7.6]
.067 [1.70] DIA.
3533 3535
3570
3515 3516P
3532 3567
3529 3514
Refer to pages 46-49 for Fuse Clip Layout and Mounting Details
1AG, 3AG, 7AG, 8AG
RIVET & SURFACE MOUNT TYPES
45
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
*Fuse clips without end stops are not UL recognized
CAT. NO. H L END STOPS
3510 .421 (10.7) .140 (3.6) NO*
3529 .421 (10.7) .140 (3.6) YES
3511 .430 (10.9) .250 (6.4) NO*
3514 .430 (10.9) .250 (6.4) YES
REFER TO PAGE 44 FOR PART DIMENSIONS
FUSE CLIP LAYOUT & MOUNTING DETAILS
46
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
.067 [1.70] DIA.
'L' DIM.
.266 [6.8] .266 [6.8]
.096 [2.5] DIA.
Mounting Detail
'L' DIM.
.040 [1.02]
.246 [6.3]
.062 [1.6]
.246 [6.3]
Mounting Detail
.246 [6.3]
.095 [2.4]
(2) PLS
.062 [1.57]
(2) PLS
.246 [6.3]
.040 [1.02] (4) PLS
'L' DIM.
Mounting Detail
.130 [3.3] .130 [3.3]
'L' DIM.
.100 [2.6] DIA. .078 [1.98] DIA.
Mounting Detail
3517
3518P
3512
3512P
3520
CAT. NO. 3517
FUSE SIZE L DIM.
5mm 20mm .910 (23.1)
CAT. NO. 3518P
FUSE SIZE L DIM.
5mm 20mm .910 (23.1)
CAT. NO. 3512
FUSE SIZE L DIM.
5mm 20mm .910 (23.1)
CAT. NO. 3512P
FUSE SIZE L DIM.
5mm 20mm .910 (23.1)
CAT. NO. 3520
FUSE SIZE L DIM.
5mm 20mm .900 (22.9)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.266 [6.8] .266 [6.8]
'L' DIM.
.067 [1.70] DIA.
Mounting Detail
3518P
3512
3512P
3520
3517
FUSE CLIP LAYOUT & MOUNTING DETAILS
47
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION.
REFER TO PAGE 44 FOR PART DIMENSIONS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
FIGURE 6
FIGURE 7
FIGURE 8
FIGURE 9
.200 [5.1]
'L' DIM.
.049 [1.24] DIA.
Mounting Detail
.197 [5.0]
'L' DIM.
.047 [1.19] DIA.
Mounting Detail
.157 [4.0] MIN.
.197 [5.0]
MIN. 'L' DIM. .197 [5.0]
MIN.
Pad Layout
'L' DIM.
.062 [1.57] DIA.
.205 [5.2]
Mounting Detail
3519 3519
3521 3521
3561
3562 3562
CAT. NO. 3519
FUSE SIZE L DIM.
5mm 20mm .650 (16.5)
CAT. NO. 3521
FUSE SIZE L DIM.
2AG .514 (13.1)
5mm 20mm .710 (18.1)
CAT. NO. 3561
FUSE SIZE L DIM.
2AG .354 (9.0)
5mm 20mm .500 (12.7)
CAT. NO. 3562
FUSE SIZE L DIM.
5mm 20mm .820 (20.9)
3AG
3561
5mm
3AG
REFER TO PAGES 44 & 45 FOR PART DIMENSIONS
FUSE CLIP LAYOUT & MOUNTING DETAILS
48
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION.
FIGURE 12
FIGURE 13
'L' DIM.
.300 [7.6].300 [7.6]
.067 [1.70] DIA.
Mounting Detail
'L' DIM.
.040 [1.02] (4) PLS
.280 [7.1] .062 [1.57]
(2) PLS
W.280 [7.1]
Mounting Detail
3529 3514
3516P 3515
FIGURE 10
CAT. NO. 3565
DESIGNATION FUSE SIZE L DIM.
4AG .281 (7.1) 1.250 (31.8) 1.000 (25.4)
3565
3565
FIGURE 11
.413 [10.5] .413 [10.5]
'L' DIM.
.089 [2.26] DIA.
Mounting Detail
3566
3566
CAT. NO. 3510, 3511, 3513, 3514, 3529
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .750 (19.1)
7AG .250 (6.4) .875 (22.2) 1.000 (25.4)
8AG .250 (6.4) 1.000 (25.4) 1.125 (28.6)
3AG .250 (6.4) 1.250 (31.8) 1.375 (34.9)
CAT. NO. 3515, 3515P, 3516P
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .735 (18.7)
7AG .250 (6.4) .875 (22.2) .985 (25.0)
8AG .250 (6.4) 1.000 (25.4) 1.100 (28.0)
3AG .250 (6.4) 1.250 (31.8) 1.360 (34.6)
ORIENTATION LEGS
CAT. NO. W
3515 .062 (1.57)
3515P .095 (2.4)
3516P .122 (3.1)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
'L' DIM.
.100 [2.6] DIA. FOR RIVET
Mounting Detail
CAT. NO. 3566
DESIGNATION FUSE SIZE L DIM.
SM/SS .406 (10.3) 1.375 (34.9) 1.515 (38.5)
5AG .406 (10.3) 1.500 (38.1) 1.640 (41.7)
FUSE CLIP LAYOUT & MOUNTING DETAILS
49
NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION.
REFER TO PAGE 45 FOR PART DIMENSIONS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
FIGURE 14
FIGURE 15
FIGURE 16
Pad Layout
3530 3530
3570 3535
4247 3533
FIGURE 17
3532 3567
FOR CAT. NO. 3530
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .450 (11.4)
7AG .250 (6.4) .875 (22.2) .700 (17.8)
8AG .250 (6.4) 1.000 (25.4) .825 (21.0)
3AG .250 (6.4) 1.250 (31.8) 1.075 (27.3)
FOR CAT. NO. 3531, 3533, 3535, 3570,
4246, 4247
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .450 (11.4)
7AG .250 (6.4) .875 (22.2) .700 (17.8)
8AG .250 (6.4) 1.000 (25.4) .825 (21.0)
3AG .250 (6.4) 1.250 (31.8) 1.075 (27.3)
FOR CAT. NO. 3531, 3533, 3535, 3570,
4246, 4247
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .120 (3.0)
7AG .250 (6.4) .875 (22.2) .365 (9.3)
8AG .250 (6.4) 1.000 (25.4) .490 (12.4)
3AG .250 (6.4) 1.250 (31.8) .740 (18.8)
FOR CAT. NO. 3532, 3567
DESIGNATION FUSE SIZE L DIM.
1AG .250 (6.4) .625 (15.9) .195 (5.0)
7AG .250 (6.4) .875 (22.2) .445 (11.3)
8AG .250 (6.4) 1.000 (25.4) .570 (14.5)
3AG .250 (6.4) 1.250 (31.8) .820 (20.8)
.136 [3.5] DIA.
'L' DIM.
Mounting Detail
.270 [6.9]
.067 [1.70] DIA.
'L' DIM.
Mounting Detail
.312 [7.9]
MIN.
'L' DIM.
.312 [7.9]
MIN.
.312 [7.9]
MIN.
.335 [8.5]
MIN.
.312 [7.9]
MIN.
'L' DIM. .312 [7.9]
MIN.
Pad Layout
FOR THRU HOLE MOUNT APPLICATIONS
FOR RIVET MOUNT APPLICATIONS
FOR SURFACE MOUNT APPLICATIONS
FOR SURFACE MOUNT APPLICATIONS
TERMINALS & TEST POINTS
Today’s high tech electronics require space saving, low cost methods
for connecting and testing circuitry. Our complete line of PC terminals,
screw terminals, headers and test points are designed to meet the
interconnect and testing challenges for electronic and electrical
component termination points. Applications include:
•Multi-Insertion applications
•Replacement for pc screw edge connectors,
blocks or strips
•Surface mount and thru-hole PCB designs
•UL approved devices
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D model-
ing, CAD and other application-engineering support for modifications,
special designs or assembly requirements to assist you in choosing the
right Keystone product for your application.
TERMINALS & TEST POINTS
51
ALLIGATOR CLIPS . . . . . . . . . . . . . . . . . .61
SCREW TERMINALS
Binding Post . . . . . . . . . . . . . . . . . . . . . . .66,67
Color Coded, PC . . . . . . . . . . . . . . . . . . .62-63
Heavy Duty . . . . . . . . . . . . . . . . .63, 65, 66
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
SEMS Screw . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Swage Mount . . . . . . . . . . . . . . . . . . . . .66-67
QUICK FIT TERMINALS
Male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-54
Female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
SOLDER LUGS . . . . . . . . . . . . . . . . . . . . . . . . .58
SOLDERLESS TERMINALS . . . . . . .56-57
TEST POINTS
Color Coded . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
THM (Thru Hole Mount) . . . . . . . . . . .59-60
SMT (Surface Mount) . . . . . . . . . . . . . . . . . . .61
SECTION CONTENTS
CAT. NO. MATERIAL MTG. HOLES
4905* .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
4909* .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
1286-ST .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
1213-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
1286 .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
1213 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
4900 .020 (.50) Brass, Tin Plate .043 (1.1) Dia.
CAT. NO. MATERIAL MTG. HOLE
1267 .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
1211 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
Underwriters Laboratories, Inc.
Recognized Component Program —
UL File Number E201546
UL file number E201546 has been assigned to
Keystone Electronics’ “Quick-Fit” terminals
(Refer to pages 52-54) indicating recognition by
Underwriters Laboratories Inc. that they are in compliance
with their component program.
Underwriters Laboratories Inc. component program
assures that “Quick-Fit” terminals meet the dimensional
and performance requirements of the National Electrical
Manufacturers Association specification number
NEMA2-1982-(1988) and UL310.
PC QUICK-FIT TERMINALS
52
PC QUICK-FIT MALE TERMINALS
CAT. NO. MATERIAL MTG. HOLES
4903 .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
4906 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
4904 .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
4907 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
.187 (4.8) TAB.187 (4.8) TAB .187 (4.8) TAB
.110 (2.8) TAB
.205 (5.2) TAB .205 (5.2) TAB
.187 (4.8) TAB
STURDI-MOUNT
STURDI-MOUNT
STURDI-MOUNT
.125 [3.2]
.205 [5.2]
.150 [3.8]
.500
[12.7]
.250 [6.4]
.200 [5.1]
.045 [1.14]
.050 [1.27]
.070 [1.80] DIA.
.140 [3.6]
.510
[13.0]
.050 [1.27]
.045 [1.14] .200 [5.1]
.250 [6.4]
.205 [5.2]
.125 [3.2]
.120
[3.1]
REF.
.281 [7.15]
.070 [1.80] DIA.
.250 [6.4]
.570
[14.5]
.187 [4.8]
.256 [6.5]
.177 [4.5] .040 [1.00]
.080 [2.1]
.416
[10.6]
.125 [3.2]
DIA.
.051 [1.30]
.187 [4.8]
.200 [5.1]
.150 [3.8]
.125 [3.2]
.050 [1.27]
.045 [1.14]
.055 [1.40] DIA.
.250 [6.4]
H
.156 [4.0]
.110 [2.8]
.062 [1.55]
.542
[13.8]
.280 [7.1]
.187 [4.8]
.050 [1.27]
.045 [1.14]
.048 [1.20] DIA.
.110 [2.8]
.285 [7.3]
.150 [3.8]
.057 [1.45]
.525 [13.4]
.048 [1.20]
DIA.
.045 [1.14]
.050 [1.27]
.200 [5.1]
.340 [8.7]
.187 [4.8]
.245 [6.2] .150 [3.8]
.120 [3.1]
.560 [14.2]
.045 [1.14]
.050 [1.27]
.200 [5.1]
.055
[1.40]
DIA.
CAT. NO. MATERIAL MTG. HOLES
1285-ST .020 (.50) Brass, Tin Plate .046 (1.2) Dia.
1212-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
.205 (5.2) TAB
.205 [5.2]
.250 [6.4] .150 [3.8]
.340 [8.7]
.560 [14.2]
.125 [3.2]
.200 [5.1]
.050 [1.27]
.045 [1.14]
.070 [1.80]
DIA.
.187 [4.8]
.120
[3.1]
REF.
.125 [3.2]
.200 [5.1]
.281 [7.15]
.140 [3.6]
.045 [1.14]
.050 [1.27]
.510
[13.0]
.055 [1.40] DIA.
.250 [6.4]
.110 (2.8) TAB
.110 (2.8) TAB A.187(4.8) TAB
CAT. NO. ANGLE CAT. NO
4915* 0° 4918*
4916* 30° 4919*
4917* 60° 4920*
.110 (2.8) & .187 (4.8) TAB
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
MATL MTG.
CAT. NO. H THICK HOLES
1285 .500 (12.7) .020 (.50) .046 (1.2) Dia.
1212 .500 (12.7) .032 (.80) .052 (1.3) Dia.
1216 .860 (21.8) .032 (.80) .052 (1.3) Dia.
Material: Brass, Tin Plate
Material: .020 (.50) Brass, Tin Plate
Mtg Holes: .046 (1.2) Dia.
*Not UL Recognized
.048 [1.2]
DIA. HOLE
.062 [1.6]
.125 [3.2]
.220
[5.6]
.200 [5.1]
.040 [1.0]
TAB
.200
[5.1]
A°
.215
[5.5]
.250 (6.4) PC QUICK-FIT MALE TABS
PC QUICK-FIT TERMINALS
53
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.250 (6.4) TAB .250 (6.4) TAB.250 (6.4) TAB
CAT. NO. MATERIAL MTG. HOLES
1266 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
.350 [8.9]
.250 [6.4]
.200 [5.1]
.056 [1.42]
.051 [1.30]
.312 [7.9] .150 [3.8]
.590 [15.0]
.070 [1.80]
DIA.
.178 [4.5] .789 [20.1]
.312 [7.9]
.250 [6.4]
.178 [4.5]
.350 [8.9]
.150 [3.8]
.045 [1.14]
.050 [1.27]
.200 [5.1]
.070 [1.80] DIA.
.580 [14.8]
.985 [25.0]
.437
[11.1]
.280 [7.1]
.250 [6.4]
.178 [4.5]
.110 [2.8]
.093 [2.4]
.312 [7.9]
.106 [2.7]
.040 [1.00]
DIA.
.070 [1.80] DIA.
CAT. NO. MATERIAL MTG. HOLES
4966 .032 (.80) Brass, Tin Plate .056 (1.4) Dia.
DUAL .110 (2.8)/.250 (6.4) TAB
.250 (6.4) TAB
.250 (6.4) TAB .250 (6.4) TAB
.250 (6.4) TAB
CAT. NO. MATERIAL MTG. HOLES
1287 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
1287-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
.250 (6.4) TAB
.250 (6.4) TAB
STURDI-MOUNT
STURDI-MOUNT STURDI-MOUNTSTURDI-MOUNT
STURDI-MOUNT
.250 (6.4) TAB .250 (6.4) TAB
.156
[4.0]
.138 [3.5]
.335
[8.5]
.172
[4.4]
.060 [1.52]
.312
[7.9] .537
[13.7]
CAT NO.
4901
.250
[6.4]
.379 [9.7]
CAT NO.
4914
.070 [1.80] DIA.
.187
[4.8]
A
.610
[15.5]
.273 [7.0] .438
[11.2]
.156 [4.0]
.250 [6.4]
.070 [1.80]
DIA.
.187 [4.8] .060 [1.52]
.138 [3.5]
.150 [3.8]
.050 [1.27]
.070 [1.80] DIA.
.250 [6.4]
.091 [2.3]
.312 [7.9]
.200 [5.1]
.178 [4.5]
.045 [1.14]
L
.710
[18.1]
.470
[12.0]
.120
[3.1]
REF.
.050 [1.27]
.045 [1.14] .200 [5.1]
.150 [3.8]
.312 [7.9]
.178 [4.5]
.250 [6.4]
.070 [1.80] DIA.
CAT. NO. MATERIAL MTG. HOLES
1282 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
CAT. NO. MATERIAL MTG. HOLES
4902 .032 (.80) Brass, Tin Plate .067 (1.7) Dia.
CAT. NO. MATERIAL MTG. HOLES
1289-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
.200 [5.1]
.045 [1.14]
.070 [1.80] DIA.
.371
[9.4]
.552
[14.0]
.312
[7.9]
.250 [6.4]
.178 [4.5]
.050 [1.27]
.150 [3.8]
.312 [7.9]
.120
[3.1]
REF.
.552
[14.0]
.050 [1.27]
.045 [1.14] .200 [5.1]
.312 [7.9]
.150 [3.8]
.178 [4.5]
.250 [6.4]
.070 [1.80] DIA.
.312
[7.9]
.250 [6.4]
.110 [2.8]
.280
[7.1]
.552
[14.0]
.371
[9.4]
.048 [1.20] DIA.
.312 [7.9]
.062 [1.57]
.178 [4.5]
.150 [3.8]
.200 [5.1]
.045 [1.14]
.050 [1.27]
.312 [7.9]
.312 [7.9]
.150 [3.8]
.312 [7.9]
.125 [3.2]
.200 [5.1]
.045 [1.14]
.050 [1.27]
.178 [4.5]
.070 [1.80] DIA.
.250 [6.4]
.515
[13.1]
1.220
[31.0]
.062 [1.6] DIA.
.250 [6.4]
.430 [10.9] .125 [3.2]
.200 [5.1]
A
.040 [1.02](3)
.178 [4.5]
.200
[5.1]
.312
[7.9]
.312 [7.9]
.280 [7.1]
CAT. NO. ANGLE A MTG. HOLES
4910 0°
4908 30° .052 (1.3) Dia.
4912 60°
CAT. NO. ANGLE A MTG. HOLES
4901 0°
4914* 90° .067 (1.7) Dia.
MATERIAL: .032 (.80) Brass, Matte Tin Plate
MATERIAL: .032 (.80) Brass, Matte Tin Plate
MATERIAL: .032 (.80) Brass, Matte Tin Plate
CAT. NO. “L” MTG. HOLES
1289 .540 (13.7)
1292 .710 (18.0) .067 (1.7) Dia.
CAT. NO. MATERIAL MTG. HOLES
1265* .032 (.80) Brass, Tin Plate .106 (2.7) Dia.
CAT. NO. MATERIAL MTG. HOLES
1281 .032 (.80) Brass, Tin Plate .052 (1.3) Dia.
*Not UL Recognized
.250 (6.4) “STURDI-MOUNT” PC QUICK-FIT HEADERS
QUICK-FIT TERMINALS
54
MATERIAL: .032 (81) Bright Brass
•Ideal for rugged multi-insertion applications
•Pre-assembled header reduces PC assembly costs
•Increases PC board retention strength
•Keeps terminals perpendicular
•Maintains position for wave soldering
SPECIFICATIONS
Material: .032 (.80) Brass or Steel, Tin Plated
Insulator: Thermoplastic, UL Rated 94V-0
Current Rating: 15 Amps @ 500V AC
Temperature Rating: -58°F to +292°F (-50°C to +145°C)
LOW PROFILEHORIZONTAL VERTICAL
CAT. NO. TAB HOLE
4005 .205 (5.2) .132 (3.4) .070 (1.78) Slot
4095 .187 (4.7) .078 (1.98) Dia. Hole
.157 [4.0]
.433 [11.0]
.200 [5.1]
.787 [20.0]
.045 [1.1]
.250 [6.4]
.200 [5.1]
L
L
.157 [4.0]
.200 [5.1]
.045 [1.1]
.200 [5.1]
.827 [21.0]
.250
[6.3]
.197 [5.0]
.039 [1.0]
L
.197 [5.0]
.591 [15.0]
.138 [3.5]
.250
[6.4]
.218
[5.5]
.619
[15.7]
REF.
.110 [2.8]
.109 [2.8]
.375
[9.5]
.062
[1.55]
.109 [2.7]
DIA.
.048 [1.20]
DIA.
.343
[8.7]
HOLE
TAB
.125 [3.2]
45°
.296 [7.5]
.250 [6.4]
.265
[6.7]
.135 [3.4] DIA.
RIVET MOUNT QUICK-FIT TERMINALS
.110 (2.8) - .187(4.8) - .250 (6.4) TABS
MULTIPLE .250 (6.4) TAB
BRASS STEEL NO.
TABS TABS OF L
CAT. NO. CAT. NO. TABS DIM.
7802 7822 2 .362 (8.2)
7803 7823 3 .562 (14.3)
7804 7824 4 .762 (19.4)
7805 7825 5 .962 (24.4)
7806 7826 6 1.162 (29.5)
AVAILABLE IN BRASS OR STEEL TABS
W
HOLE
A°
L
TAB
A°
L
HOLE
TAB W
L
.406
[10.3]
.343
[8.7]
.250 [6.4]
.375 [9.5]
.130 [3.3]
MATERIAL: .020 (.51) Brass, Tin Plate
MATERIAL: .020 (.51) Brass, Tin Plate
.187 (4.8) - .205 (6.4) TABS.110 (2.8) TAB
45° TAB
.110 (2.8) - .187 (4.8) - .250 (6.4) TABS
CAT TAB
NO. PAIRS L SIZE
1005 2 .687 (17.4)
1006 3 1.062 (27.0) .250 (6.4)
1007 4 1.441 (36.6)
1008 5 1.820 (46.2)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
BRIGHT
BRASS
•UL recognized bright brass Quick-Fit terminals
• Rivet mount male tab versions meet NEMA 2-E201546 & UL 310 specifications
• Designed for repeated mating cycles
• For tabs 0.110 (2.8mm) to 0.250 (6.4mm)
CAT. NO. ANGLE
1269 0°
1270 30°
A = 45° A = 90° TAB MAT’L L W HOLE A = 45° A = 90°
CAT. NO. CAT. NO. SIZE THICK TAB WIDTH DIA. CAT. NO. CAT. NO.
2004 2002 .110 (2.8) .020 (.51) .365 (9.3) .180 (4.6) .096 (2.4) 1233 1220
1271 1261 .187 (4.8) .020 (.51) .375 (9.5) .250 (6.4) .100 (2.5) 1234 1221
1280 1256 .250 (6.4) .032 (.81) .406 (10.3) .306 (7.8) .130 (3.3) 1235 1222
MATTE TIN
BRIGHT BRASS
A = 45° A = 90° TAB MAT’L L W HOLE A = 45° A = 90°
CAT. NO. CAT. NO. SIZE THICK TAB WIDTH DIA. CAT. NO. CAT. NO.
2005 2003 .110 (2.8) .020 (.51) .360 (9.1) .180 (4.6) .096 (2.4) 1240 1227
1263 1262 .187 (4.8) .020 (.51) .315 (8.0) .250 (6.4) .100 (2.5) 1241 1228
1258 1257 .250 (6.4) .032 (.81) .400 (10.1) .306 (7.8) .130 (3.3) 1242 1229
MATTE TIN
BRIGHT BRASS
BRASS STEEL NO.
TABS TABS OF L
CAT. NO. CAT. NO. TABS DIM.
7812 7832 2 .362 (8.2)
7813 7833 3 .562 (14.3)
7814 7834 4 .762 (19.4)
7815 7835 5 .962 (24.4)
7816 7836 6 1.162 (29.5)
BRASS STEEL NO.
TABS TABS OF L
CAT. NO. CAT. NO. TABS DIM.
7817 7827 2 .320 (8.1)
7818 7828 3 .517 (13.1)
7819 7829 4 .713 (18.1)
7820 7830 5 .910 (23.1)
7821 7831 6 1.107 (28.1)
PC QUICK-FIT FEMALE TERMINALS
ACCEPTS .110 (2.8) TAB
VERTICAL ENTRY
VERTICAL ENTRY
ACCEPTS .187 (4.8) TAB
VERTICAL ENTRY
ACCEPTS .110 (2.8) TAB
HORIZONTAL ENTRY
ACCEPTS .187 (4.8), .205 (5.2), .250 (6.4) TAB
ACCEPTS .110 (2.8) .032 (.81) TAB
HORIZONTAL ENTRY
Mounting Detail
MATERIAL:
.012 (.30) Brass, Tin-Nickel Plate Mounting Detail
MATERIAL:
.016 (.41) Brass, Tin-Nickel Plate
MATERIAL: Brass, Tin-Nickel Plate
Mounting Detail
Mounting Detail
MATERIAL: .016 (.41) Brass, Tin-Nickel Plate
CAT.
NO. ACCEPTS TAB
3525 .205 (5.2).020 (.51)
3575* .205 (5.2).032 (.81)
CAT. NO. ACCEPTS TAB
3528 .250 (6.4).032 (.81)
.400 [10.1]
.046 [1.15] DIA.
.076 [1.9] DIA.
.400 [10.1]
.067 [1.70] DIA.
.104 [2.6] DIA.
.146 [3.7]
.232 [5.9]
W (Ref)
.420
[10.7]
.150 [3.8]
.050 [1.25]
.200 [5.1]
.200 [5.1]
.052 [1.30] DIA.
CAT. NO. ACCEPTS TAB
3545 .110 (2.8).020 (.51)
3549 .110 (2.8).032 (.81)
.212
[5.4]
.062
[1.55]
.100 [2.5]
.075 [1.90]
.400 [10.2]
.040
[1.00] .070 [1.80]
.156 [4.0]
.280 [7.1]
.070 [1.80]
.125 [3.2]
.281 [7.1]
.437
[11.1]
.076 [1.90]
.271 [6.9]
.120 [3.0]
.250
[6.3]
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Mounting Detail
.200 [5.1]
.100 [2.54] DIA.
Mounting Detail
.200 [5.1]
.089 [2.3]
Mounting Detail
.328 [8.35]
.152 [3.86] DIA.
MATERIAL:
.016 (.41) Brass, Tin-Nickel Plate
ACCEPTS .205 (5.2) TAB
VERTICAL ENTRY
ACCEPTS .250 (6.4) TAB
CAT. NO. ORIENTATION
3557 top & side entry
3577* bottom entry
MATERIAL:
.016 (.41) Brass, Tin-Nickel Plate
MATERIAL:
.020 (.51) Copper, Tin-Nickel Plate
VERTICAL OR HORIZONTAL ENTRY
SMT - HORIZONTAL ENTRY
SMT - VERTICAL OR HORIZONTAL ENTRY
CAT. NO. 3555
ACCEPTS .312 (7.9) TAB
OVER SIZED
.032 [0.8]
.062 [1.6]
.400
[10.2]
.134 [3.4]
.150 [3.8]
.150 [3.8]
.185 [4.7]
Underwriters Laboratories, Inc.
Recognized Component Program
— UL File Number E201546
CAT. MATL
NO. ACCEPTS TAB “W” “A” THICK
3571 .187(4.8) .020(.51) .222 (5.6) .162 (4.1) .012 (.30)
3572* .187(4.8) .032(.81)
3546 .205(5.2) .020(.51) .240 (6.1) .180 (4.6) .012 (.30)
3550 .205(5.2) .032(.81)
3547 .250(6.4) .032(.81) .291 (7.4) .205 (5.2) .016 (.41)
.392 [10.0]
.180 [4.6]
.422
[10.7]
.375
[9.5]
.109
[2.8]
.106 [2.7]
.578
[14.7]
.180 [4.6]
.144 [3.7]
.065 [1.30] DIA.
FEMALE PC QUICK-FIT TERMINALS
55
Mounting Detail
Cat. No. 3557
.134 [3.4]
.067 [1.7]
DIA. (2)PLS.
Mounting Detail
Cat. No. 3577
.067 [1.7]
DIA. (2)PLS.
TERMINAL
CLEARENCE
.040 [1.0]
.134 [3.4]
.062 [1.6]
.212
[5.4]
.062
[1.55]
W
.100 [2.5]
A
.098 [2.5]
.400 [10.2]
.062
[1.55]
.250
[6.4]
MATERIAL:
.012 (.30) Brass, Tin-Nickel Plate
.050 [1.3]
.125 [3.2]
.281 [7.1]
.437
[11.1]
.091 [2.3]
.291 [7.4]
.110 [2.8]
.250
[6.3]
.086 [2.2]
.062 [1.55]
W (Ref)
.440
[11.2]
.156 [4.0]
.144
[3.7]
.125 [3.2]
.196
[5.0]
CAT.
NO. ACCEPTS TAB W
3534 .110(2.8).020(.51) .070 (1.80)
3544 .110(2.8).032(.81) .075 (1.92)
.312 [7.9]
.090 [2.3]
.250
[6.4]
.100 [2.54]
.075 [1.9] .105
[2.7]
.156
[4.0] .150 [3.8]
.242 [6.2]
.282 [7.2]
.062 [1.6] .100 [2.5]
.185 [4.7]
.250 [6.4]
.176 [4.5]
.067 [1.7]
.252
[6.4]
.067 [1.7] TYP.
.105 [2.7]
Mounting Detail
.100 [2.6]
.105 [2.7]
.312 [7.9]
Mounting Detail
SPECIFICATIONS
Material: .012 (.30)Brass, Tin-Nickel Plate
Current Rating: 15 Amps @ 500V AC
SPECIFICATIONS
Material: .016 (.40)Brass, Tin-Nickel Plate
Current Rating: 15 Amps @ 500V AC
Tape & Reel Spec’s: 16mm wide, 12mm pitch,
13 inch reel (750 pieces per reel)
*Low insertion force design
Tape & Reel Spec’s: 24mm wide, 8mm pitch,
13 inch reel (2000 pieces per reel)
CAT. NO. ACCEPTS TAB “W”
3548 .187(4.8).020(.51).093 (2.36)
3578* .187(4.8).020(.51) .093 (2.36)
3551 .187(4.8).032(.81) .102 (2.59)
CAT. NO. 3569* (Bulk)
CAT. NO. 3569TR* (Tape & Reel) CAT. NO. 3586TR* (Tape & Reel)
CAT. NO. 3586* (Bulk)
*Not UL Recognized
ACCEPTS ALL TABS
.110 (2.8) TO .50 (6.4) .020 (.50) TO .032 (.80)
ACCEPTS ALL TABS
.110 (2.8) TO .50 (6.4) .020 (.50) TO .032 (.80)
3557 3577
WIRE BARREL MAX.
CAT. RANGE MALE TAB .250 (6.4) INSUL.
NO. (AWG) WIDTH THICK L W D LENGTH I.D. DIA.
8296 22/18 .187 (4.8) .020 (.51) .87 (22.1) .37 (9.4) .30 (7.6) .24 (6.3) .080 (2.03) .145 (3.7)
8297 (Red) .250 (6.4) .032 (.81) .95 (24.1) .44 (11.2) .30 (7.6) .25 (6.4) .065 (1.65) .145 (3.7)
8298 16 /14 .187 (4.8) .020 (.51) .87 (22.1) .37 (9.4) .30 (7.6) .24 (6.3) .080 (2.03) .170 (4.3)
8299 (Blue) .250 (6.4) .032 (.81) .95 (24.1) .44 (11.2) .30 (7.6) .25 (6.4) .085 (2.16) .170 (4.3)
8300 12/10 .250 (6.4) .032 (.81) 1.05 (26.7) .47 (11.9) .39 (9.9) .25 (6.4) .150 (3.8) .250 (6.4)
(Yellow)
WIRE MATES WITH BARREL MAX.
CAT. RANGE MALE TAB .250 (6.4) INSUL.
NO. (AWG) WIDTH THICK L W D I.D. DIA.
8291 22/18 .187 (4.8) .020 (.51) .81 (20.6) .30 (7.6) .23(5.8) .085 (2.16) .145 (3.7)
8292 (Red) .250 (6.4) .032 (.81) .87 (22.1) .37 (9.4) .23(5.8) .080 (2.03) .145 (3.7)
8293 16 /14 .187 (4.8) .020 (.51) .81 (20.6) .30 (7.6) .23(5.8) .085 (2.16) .145 (3.7)
8294 (Blue) .250 (6.4) .032 (.81) .87 (22.1) .37 (9.4) .23(5.8) .080 (2.03) .170 (4.3)
8295 12/10 .250 (6.4) .032 (.81) .99 (25.1) .39 (9.9) .32(8.1) .165 (4.2) .250 (6.4)
(Yellow)
CAT. MATES WITH MALE TAB AWG MAT’L
NO. WIDTH THICK L SIZE THICK
1252 .110 (2.8) .020 (.51) .640 (16.3) 18-22 .010 (.25)
1264 .187 (4.8) .020 (.51) .576 (14.6) 16-22 .013 (.33)
4469 .205 (5.2) .020 (.51) .640 (16.3) 16-20 .013 (.33)
CAT. BOOT
NO. COLOR
4471 CLEAR
4472 RED
4473 BLUE
4474 YELLOW
WIRE MATES WITH BARREL
CAT. RANGE MALE TAB .250 (6.4)
NO. (AWG) WIDTH THICK L I.D.
8272 22/18 .187 (4.8) .020 (.51) .58 (14.7) .085 (2.16)
8273 .250 (6.4) .032 (.81) .66 (16.8) .080 (2.03)
8274 16 /14 .187 (4.8) .020 (.51) .58 (14.7) .085 (2.16)
8275 .250 (6.4) .032 (.81) .66 (16.8) .080 (2.03)
VINYL BOOT
QUICK-FIT FEMALES
SOLDERLESS QUICK-FIT TERMINALS
MATERIAL: Tinned Brass
•Easily slips over terminal
•Insulates and protects
WIRE MATES WITH BARREL MAX
CAT. RANGE MALE TAB .250 (6.4) INSULATION
NO. (AWG) WIDTH THICK L I.D. DIAMETER
8276 22/18 .187 (4.8) .020 (.51) .78 (19.8) .085 (2.16) .145 (3.7)
8277 (Red) .250 (6.4) .032 (.81) .87 (22.1) .080 (2.03)
8278 16 /14 .187 (4.8) .020 (.51) .78 (19.8) .085 (2.16) .145 (3.7)
8279 (Blue) .250 (6.4) .032 (.81) .87 (22.1) .080 (2.03)
8280 12/10 .250 (6.4) .032 (.81) .96 (24.4) .165 (4.2) .250 (6.4)
(Yellow)
WIRE MAX
CAT. RANGE MALE TAB BARREL INSULATION
NO. (AWG) WIDTH THICK L LENGTH I.D. DIAMETER
8286 22/18 .187 (4.8) .020 (.51) .85 (21.6) .24 (6.3) .080 (2.03) .145 (3.7)
8287 (Red) .250 (6.4) .032 (.81) .93 (23.6) .25 (6.4) .065 (1.65) .145 (3.7)
8288 16 /14 .187 (4.8) .020 (.51) .85 (21.6) .24 (6.3) .080 (2.03) .145 (3.7)
8289 (Blue) .250 (6.4) .032 (.81) .93 (23.6) .25 (6.4) .085 (2.16) .170 (4.3)
8290 12/10 .250 (6.4) .032 (.81) 1.05 (26.7) .25 (6.4) .150 (3.8) .250 (6.4)
(Yellow)
L
WIDTH
LL
WIDTHWIDTH
L
WIDTH
L
WIDTH
L
D
WWIDTH
L
D
WWIDTH
SOLDERLESS TERMINALS
56
FEMALE NON-INSULATED For .250 (6.4) QUICK-FITS
FEMALE NON-INSULATED
FEMALE VINYL INSULATED
MALE NON-INSULATED
MALE VINYL INSULATED
FEMALE FULLY INSULATED NYLONMALE FULLY INSULATED NYLON
Boot and Quick-Fit sold separately
.298 [7.6]
.920
[23.4]
.354 [9.0]
.187
[4.7] .131 [3.3
]
.140 [3.5] DIA.
L
TAB SIZE
WIRE
CAT. RANGE MALE TAB BARREL
NO. (AWG) FIG. WIDTH THICK L LENGTH I.D.
8281 22/18 2 .187 (4.8) .020 (.51) .64 (16.3) .24 (6.3) .080 (2.03)
8282 1 .250 (6.4) .032 (.81) .73 (18.5) .25 (6.4) .065 (1.65)
8283 16/14 2 .187 (4.8) .020 (.51) .64 (16.3) .24 (6.3) .080 (2.03)
8284 1 .250 (6.4) .032 (.81) .73 (18.5) .25 (6.4) .085 (2.16)
8285 12/10 1 .250 (6.4) .032 (.81) .75 (19.1) .25 (6.4) .150 (3.8)
FIG. 2
FIG. 1
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SPECIFICATIONS: Terminals: EPT Copper Insulation: Vinyl (Non-RoHS Compliant)
RoHS
BARREL
WIRE FOR .250 (6.4) MAX.
CAT. RANGE STUD MATL LONG INSUL.
NO. (AWG) SIZE W L E THICK I.D. DIA.
8209 22/18 6 .25 (6.4) .80 (20.3) .67 (17.0)
8210 (Red) 8 .33(8.4) .90 (22.9) .74 (18.8) .030 (.76) .070 (1.78) .145 (3.7)
8211 10 .33 (8.4) .90 (22.9) .74 (18.8)
8212 16 /14 6 .25 (6.4) .80 (20.3) .67 (17.0)
8213 (Blue) 8 .33(8.4) .90 (22.9) .74 (18.8) .030 (.76) .090 (2.29) .170 (4.3)
8214 10 .33 (8.4) .90 (22.9) .74 (18.8)
8215 12/10 6 .28 (7.1) .98 (24.9) .84 (21.3)
8216 (Yellow) 8 .38 (9.7) 1.03 (26.2) .84 (21.3) .040 (1.02).135 (3.4) .250 (6.4)
8217 10 .38 (9.7) 1.03 (26.2) .84 (21.3)
WIRE FOR FLANGED
CAT. RANGE STUD MATL BARREL CAT.
NO. (AWG) SIZE W L E THICK I.D. NO.
8218 68236
8219 22/18 8 .30 (7.6) .65 (16.5) .50 (12.7) .030 (.76) .090 (2.29) 8237
8220 10 8238
8221 68239
8222 16/14 8 .30 (7.6) .65 (16.5) .50 (12.7) .030 (.76) .090 (2.29) 8240
8223 10 8241
8224 68242
8225 12/10 8 .32 (8.1) .73 (18.5) 54 (13.7) .040 (1.02) .135 (3.4) 8243
8226 10 8244
WIRE FOR BARREL
CAT. RANGE STUD MATL
NO. (AWG) SIZE W L E THICK I.D.
8200 6 .25 (6.4) .60 (15.2) .47 (11.9)
8201 22/18 8 .33 (8.4) .70 (17.8) .54 (13.7) .030 (.76) .070 (1.78)
8202 10 .33 (8.4) .70 (17.8) .54 (13.7)
8203 6 .25 (6.4) .60 (15.2) .47 (11.9)
8204 16 /14 8 .33 (8.4) .70 (17.8) .54 (13.7) .030 (.76) .090 (2.29)
8205 10 .33 (8.4) .70 (17.8) .54 (13.7)
8206 6 .28 (7.1) .68 (17.3) .54 (13.7)
8207 12/10 8 .38 (9.7) .73 (18.5).54 (13.7) .040 (1.02).135 (3.4)
8208 10 .38 (9.7) .73 (18.5).54 (13.7)
WIRE FOR
CAT. RANGE STUD MATL BARREL
NO. (AWG) SIZE W L E THICK I.D.
8254 6 .25 (6.4)
8255 22/18 8 .30 (7.6) .68 (17.3) .50 (12.7) .030 (.76) .070 (1.78)
8256 10 .32 (8.1)
8257 6 .25 (6.4)
8258 16 /14 8 .30 (7.6) .68 (17.3) .50 (12.7) .030 (.76) .090 (2.29)
8259 10 .32 (8.1)
8260 6 .28 (7.3)
8261 12/10 8 .32 (8.1) .73 (18.5) .53 (13.6) .040 (1.02) .135 (3.4)
8262 10 .32 (8.1)
BARREL
WIRE FOR .250 (6.4) MAX.
CAT. RANGE STUD MATL LONG INSUL.
NO. (AWG) SIZE W L E THICK I.D. DIA.
8263 22/18 6 .25 (6.4)
8264 (Red) 8 .30 (7.6) .88 (22.4) .70 (17.8) .030 (.76) .070 (1.78) .145 (3.7)
8265 10 .32 (8.1)
8266 16 /14 6 .25 (6.4)
8267 (Blue) 8 .30 (7.6) .88 (22.4) .70 (17.8) .030 (.76) .090 (2.29) .170 (4.3)
8268 10 .32 (8.1)
8269 12/10 6 .28 (7.3)
8270 (Yellow) 8 .32 (8.1) 1.03 (26.2) .83 (21.2) .040 (1.02) .135 (3.4) .250 (6.4)
8271 10 .32 (8.1)
L
W
E
.250
[6.4]
E
W
L
E
W
L.250
[6.4]
L
W
E
E
.250
[6.4]
W
LL
W
E
RING TONGUE NON-INSULATED
FlangedFlanged
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SOLDERLESS TERMINALS
SOLDERLESS TERMINALS
57
RING TONGUE INSULATED
BLOCK SPADE NON-INSULATED BLOCK SPADE INSULATED
SNAP SPADE NON-INSULATED SNAP SPADE INSULATED
Slots for looping
solid wire
Confined trapezoid-type crimping
dies for insulated terminals
Indentor-type crimping die
for non-insulated terminals
Anvil-type wire cutter
is precision ground
“F” type crimping die 7-8 mm
for automotive terminals
Wire Stripper is also
handy wire gauge
(22 thru 8 AWG)
Precision ground
scissors action
wire cutter
Threaded bolt cutter
for five common sizes
Crimping die for
non-insulated terminals
CAT. NO. 1345
BARREL
WIRE FOR .250 (6.4) MAX. FLANGED
CAT. RANGE STUD MATL LONG INSUL. CAT.
NO. (AWG) SIZE W L E THICK I.D. DIA. NO.
8227 22/18 68245
8228 (Red) 8 .30 (7.6) .85 (21.6) .70 (17.8) .030 (.76) .070 (1.78) .145 (3.7) 8246
8229 10 8247
8230 16/14 68248
8231 (Blue) 8 .30 (7.6) .85 (21.6) .70 (17.8) .030 (.76) .090 (2.29) .175 (4.4) 8249
8232 10 8250
8233 12/10 68251
8234 (Yellow) 8 .32 (8.1) 1.03 (26.2) .84 (21.3) .040 (1.02) .135 (3.4) .255 (6.5) 8252
8235 10 8253
HAND CRIMP TOOL
SPECIFICATIONS: Terminals: EPT Copper Insulation: Vinyl (Non-RoHS Compliant)
RoHS
CAT. NO. H STUD SIZE
7325 .120 (3.1) #4
7326 .140 (3.6) #6
7327 .171 (4.4) #8
7340 .196 (5.0) #10
CAT. NO. H STUD SIZE
7331 .120 (3.1) #4
7332 .140 (3.6) #6
7333 .171 (4.4) #8
CAT. NO. H STUD SIZE
7328 .120 (3.1) #4
7329 .140 (3.6) #6
7330 .171 (4.4) #8
CAT. NO. H STUD SIZE
7314 .120 (3.1) #4
7315 .140 (3.6) #6
7316 .171 (4.4) #8
CAT. NO. H STUD SIZE
7317 .120 (3.1) #4
7318 .140 (3.6) #6
7319 .171 (4.4) #8
4704 .196 (5.0) #10
CAT. NO. H STUD SIZE
7311 .120 (3.1) #4
7312 .140 (3.6) #6
7313 .171 (4.4) #8
CAT. NO. H STUD SIZE
909 .120 (3.1) #4
916 .140 (3.6) #6
917 .171 (4.4) #8
MATERIAL: .018 (.46) Brass, Tin Plate
CAT. NO. H STUD SIZE
903 .120 (3.1) #4
904 .140 (3.6) #6
905 .171 (4.4) #8
913 .196 (5.0) #10
CAT. NO. H STUD SIZE
910 .120 (3.1) #4
918 .140 (3.6) #6
906 .171 (4.4) #8
LOCKWASHER TERMINAL LUGS
TERMINAL LUGS
58
MATERIAL: .020 (.51) Brass, Tin Plate
SOLDER TERMINAL LUGS
H
.281 [7.2]
.531
[13.5]
.080 [2.03]
RADIUS
.312
[7.9] .076 [1.93]
DIA.
PC TERMINAL LUGS
MATERIAL: .016 (.40) Brass, Tin Plate
.250 [6.4]
.312
[7.9]
.515
[13.1]
.080 [2.03]
RADIUS
.093 [2.36]
DIA.
.136 [3.0]
H
.437
[11.1]
.687
[17.5]
.265 [6.8]
.140 [3.6]
.078 [1.98]
DIA.
H
.625
[15.9]
.875
[22.3]
.312 [7.9]
.171 [4.4]
.093 [2.36]
DIA.
.296
[7.5]
.464
[11.8]
.180 [4.6]
.093 [2.35]
I. DIA.
.078 [1.98]
RADIUS
.078 [1.98]
DIA.
H
.312 [7.9]
.234 [6.0]
.250
[6.4]
.640
[16.3]
.093 [2.36]
RADIUS
.093 [2.36]
DIA. (2) PLS
H
.218
[5.6]
.729
[18.6]
.312 [7.9]
.158 [4.1] .156 [4.0]
.093 [2.36]
DIA.
H
.265
[6.8]
.312 [7.9]
.812
[20.6]
.234 [6.0]
.093 [2.36]
DIA.
.086 [2.17]
RADIUS
H
.312 [7.9]
.343
[8.7]
.718
[18.3] .093 [2.36]
DIA. (2) PLS
.093 [2.36]
RADIUS
.125 [3.2]
H
.312 [7.9]
.500
[12.7]
.734
[18.7]
.156 [4.0]
.093 [2.36]
DIA.
H
.312 [7.9]
.625
[15.9]
.875
[22.2]
.171 [4.4]
.093 [2.36]
DIA.
MATERIAL: .015 (.38) Brass, Tin Plate
MATERIAL: .016 (.41) Brass, Tin Plate
MATERIAL: .020 (.51) Brass, Tin Plate
MATERIAL: .020 (.51) Brass, Tin Plate
MATERIAL: .018 (.46) Brass, Tin Plate MATERIAL:.018 (.46) Brass, Tin Plate
CAT. NO. 680
CAT. NO. 4004
MATERIAL: .018 (.46) Brass, Tin Plate
MATERIAL: .013 (.33) Brass, Tin Plate
MATERIAL: .018 (.46) Brass, Tin Plate
MATERIAL: .018 (.46) Brass, Tin Plate
MATERIAL: .018 (.46) Brass, Tin Plate
CAT. NO. 907
H
.312 [7.9]
.375
[9.5]
.625
[15.9]
.093 [2.36]
RADIUS
.093 [2.36]
DIA.
.062 [1.57]
.156 [4.0]
.312 [7.9]
.390
[9.9]
.562
[14.3]
.130 [3.3]
DIA.
L
.075 [1.91]
.312 [7.9]
.130 [3.3]
DIA.
CAT. NO. L
4000 .500 (12.7)
4001 .562 (14.3)
4002 .750 (19.1)
4003 1.000 (25.4)
CAT. NO. H STUD SIZE
908 .120 (3.1) #4
914 .140 (3.6) #6
915 .171 (4.4) #8
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PC TEST POINTS - SLOTTED & LOOP TYPES
PC TEST POINT TERMINALS
59
CAT. NO. 1033 CAT. NO. 680
CAT. NO. 4954
CAT. NO. 1039
CAT. NO. 1045
CAT. NO. 4951
CAT. NO. 1040
CAT. NO. 1034
CAT. NO. 1038
CAT. NO. 1035
CAT. NO. 1250
CAT. NO. 1037 CAT. NO. 1036 CAT. NO. 4953
CAT. NO. 1032
•Low profile, space saving designs for dense packaging
•Wide variety of configurations to suit most applications
•Safe, practical, economical replacement for wire-wrap posts
•Easy mount design, ideal for wave soldering
•Re-fit PC boards without need for re-design
•Provides easy access for production testing and field service troubleshooting
•Positive grip when using J hooks, EZ hooks, grabbers, clips, tips and probes
•Custom test point terminals can be manufactured to your specifications
•Other platings and materials available upon request
.070 [1.78] L
.032 [.81]
DIA. (2) PLS.
.035 [.89]
.075 [1.90]
.114
[2.9]
.121 [3.1]
.196 [5.0]
.078 [1.98]
.032 [.81]
.312
[7.9]
.035 [.90]
DIA.
.060 [1.52]
.039 [1.00]
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. 4950
.047 [1.19]
DIA.
.097 [2.5]
.039 [.99]
.044
[1.12]
.115 [2.9]
.275
[7.0]
.050 [1.27]
.093 [2.4]
.047 [1.19]
DIA.
.130
[3.30]
.078 [1.98]
.039 [1.00]
.125 [3.18]
.100 [2.5]
.062 [1.57] .039 [1.00]
.117 [3.0]
.218 [5.5]
.169
[4.3]
.060 [1.52]
.100 [2.5]
.047 [1.19]
.218 [5.5]
.047 [1.19]
.110 [2.8]
.100 [2.5]
.043 [1.09]
.125 [3.2]
.105 [2.7]
.039 [1.00]
.177
[4.5]
.050 [1.27]
.055 [1.40] X .087 [2.20]
.055
[1.40]
.200
[5.1]
.400
[10.2]
.114 [2.9]
.039 [1.00]
.115 [2.9]
.275 [7.0]
.040 [1.02]
.118 [3.0]
.047 [1.19]
.110 [2.8]
.098 [2.5]
.035 [.89]
.039
[1.00]
.126
[3.2]
.071 [1.80]
.047
[1.19]
.157 [4.0]
.355 [9.0] .047 [1.19]
X .078 [1.98]
.094 [2.4]
.047 [1.19]
.060 [1.52] X
.100 [2.5]
.355 [9.0]
.150 [3.8]
.110 [2.8]
L
.067 [1.70]
.063 [1.60]
.197 [5.0]
.050 [1.30] x
.098 [2.50]
.417 [10.6]
.156 [4.0]
.110 [2.8]
.060 [1.52]
.060 [1.52] .156 [4.0]
.239 [6.1]
.070 [1.78]
DIA (2) PLS.
.110 [2.8]
.110 [2.8]
.069 [1.75]
.047 [1.20] x
.098 [2.5]
.275 [7.0]
.039 [1.00]
.118 [3.0]
.055 [1.40]
.138 [3.5]
.047 [1.19]
.195 [5.0]
.250 [6.4]
.118 [3.0]
W
H
.047 [1.19]
X .093 [2.36]
.054
[1.37]
.125 [3.2]
.171
[4.3]
.118 [3.0]
.064
[1.63] DIA
.234
[5.9]
.055 [1.40]
.160 [4.1]
.156 [4.0]
.051 [1.30]
.138 [3.5]
.125 [3.2]
DIA.
.118 [3.0]
.047 [1.19]
.236 [6.0]
.531
[13.5]
.256
[6.5]
.130 [3.3]
DIA.
.062 [1.57]
.156 [4.0]
.312 [7.9]
.562
[14.3]
.390
[9.9]
CAT. NO. L
1030 .120 (3.0)
1031 .156 (4.0)
CAT. NO. L
1041 .275 (7.0)
1046 .150 (3.8)
CAT. NO. WH
1249 .047 (1.20) .087 (2.21)
4952 .063 (1.60) .098 (2.50)
CUSTOM
TERMINALS
Custom terminals can be
machined to your exact
specifications. Standard
and special terminals can
be staked onto special
boards. Please email/fax
your design to our
Engineering Department.
MATERIAL: .025 (.64) Brass
MATERIAL: .016 (.41) Brass MATERIAL: .025 (.64) Brass MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass
MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) BrassMATERIAL: .024 (.64) Brass
MATERIAL: .020 (.51) Brass MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass
MATERIAL: .025 (.64) Brass
MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) Brass MATERIAL: .020 (.51) Brass MATERIAL: .015 (.38) Brass
MATERIAL: .032 (.81) Brass
MATERIAL: Brass, Tin Plate
(THM) THRU HOLE MOUNT TEST POINTS - COLOR KEYED
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Color keyed for visibility and quick identification
•Economical choice for PC test point terminations
•Snap-fit mounting provides positive retention for wave soldering
•Wire form loop for safe, non-slip testing
•Space saving, ultra low and low profile designs
•High profile design for difficult to reach applications
•Suitable for high density packaging on .062 (1.57) and .093 (2.36) PC boards
•Practical replacement for wire-wrap posts and turrets
•Secure grip for J hooks, EZ hooks, grabbers, alligator clips, tips or probes
•High tempurature nylon base ideal for reflow soldering
•Ideal for reliable production testing and field service troubleshooting
SPECIFICATIONS
Terminal:
.010 (.25) .020 (.51) Phosphor Bronze,
Silver Plate
Base: Nylon 46, UL Rated 94V-0
Mtg. Hole: .040 (1.0) Diameter
.350
[8.9]
.120
[3.0]
.220
[5.6]
.070 [1.80] I.D.
.125 [3.2] DIA.
COMPACT
COLOR KEYED
MINIATURE MULTIPURPOSE
SPECIFICATIONS
Terminal:
.015 (.38) .032 (.81)Phosphor Bronze,
Silver Plate
Base: Nylon 46, UL Rated 94V-0
Mtg. Hole: .063 (1.6) Diameter
SPECIFICATIONS
Terminal:
.015 (.38) .032 (.81) Phosphor Bronze,
Silver Plate
Base: Nylon 46, UL Rated 94V-0
Mtg. Hole: .063 (1.6) Diameter
MATERIAL: .017 (.43) Dia.
Phospher Bronze Silver plate
Mtg Hole: .040 (1.0)
MATERIAL: .020 (.50) Dia.
Phospher Bronze Silver plate
Mtg Hole: .073 (1.85)
MATERIAL: .020 (.50) Dia.
Phospher Bronze Silver plate
Mtg Hole: .040 (1.0)
MATERIAL: .016 (.40) .028
(.71) Phospher Bronze Silver plate
Mtg Hole: .040 (1.0)
MATERIAL: .020 (.50) Dia.
Phospher Bronze Silver plate
Mtg Hole: .114 (2.9)
MATERIAL: .016 (.40) .028 (.71)
Phospher Bronze Silver plate
Mtg Hole: .040 (1.0)
ULTRA LOW PROFILE
.200 [5.1]
REF. .350
[8.9]
.094 [2.4] DIA.
SHOWN AS
INSTALLED INTO
.040 [1.02] DIA.
MOUNTING HOLE
.100 [2.5]
REF.
.200 [5.1]
.100 [2.5] DIA.
SHOWN AS
INSTALLED INTO
.040 [1.02] DIA.
MOUNTING HOLE
SHOWN AS
INSTALLED INTO
.112 [2.84] TO .078 [1.98] DIA.
MOUNTING HOLE
.150 [3.8]
.400
[10.2]
.250 [6.4]
REF.
SHOWN AS
INSTALLED INTO
.067 [1.70] TO .078 [1.98] DIA.
MOUNTING HOLE
.100 [2.5]
.350
[8.9]
.200 [5.1]
REF.
SHOWN AS
INSTALLED INTO
TWO .040 [1.02] DIA
MOUNTING HOLE
.300 [7.6]
REF.
.200
[5.08]
SHOWN AS
INSTALLED INTO
T
WO .040 [1.02] DIA.
MOUNTING HOLE
.200 [5.1]
REF.
.100 [2.54]
LOW PROFILE
.180
[4.6]
.120
[3.0]
.300
[7.6]
.100 [2.5] DIA.
.050 [1.25] I.D.
.445
[11.3] .120
[3.0]
.320
[8.1]
.070 [1.80] I.D.
.125 [3.2] DIA.
CAT. BASE CAT. BASE
NO. COLOR NO. COLOR
5000 RED 5115 BROWN
5001 BLACK 5116 GREEN
5002 WHITE 5117 BLUE
5003 ORANGE 5118 GREY
5004 YELLOW 5119 PURPLE
CAT. BASE CAT. BASE
NO. COLOR NO. COLOR
5005 RED 5120 BROWN
5006 BLACK 5121 GREEN
5007 WHITE 5122 BLUE
5008 ORANGE 5123 GREY
5009 YELLOW 5124 PURPLE
CAT. BASE CAT. BASE
NO. COLOR NO. COLOR
5010 RED 5125 BROWN
5011 BLACK 5126 GREEN
5012 WHITE 5127 BLUE
5013 ORANGE 5128 GREY
5014 YELLOW 5129 PURPLE
THM TEST POINTS
60
CAT. NO. 5021 CAT. NO. 5020
CAT. NO. 5023 CAT. NO. 5024
CAT. NO. 5025 CAT. NO. 5026
STANDARD LARGE
.100 SPACING .200 SPACING
JUMPERS
.040 [1.0] (2) PLS.
.100 [2.5]
Mounting Detail
.200 [5.1]
.040 [1.0] (2) PLS.
Mounting Detail
(SMT) SURFACE MOUNT TEST POINTS ON TAPE & REEL
MICRO MINIATURE
SPECIFICATIONS
Contact Material:
.010 (.25) Phosphor Bronze
Contact Finish: Silver Plate
Tape Material: 8mm wide; 4mm pitch;
conductive polycarbonate carrier tape
meets ANSI/EIA-481 standard
SPECIFICATIONS
Contact Material:
.015 (.38) Phosphor Bronze
Contact Finish: Silver Plate
Tape Material: 12mm wide; 4mm pitch;
conductive polycarbonate carrier tape
meets ANSI/EIA-481 standard
.150 [3.80]
MIN.
.080 [2.03]
MIN.
•Manufactured using flat wire to provide a large mounting
surface area
•Ideal for use with miniature probes, clips, and hooks
•Efficient, safe, board level testing
•Ultra low profile, ideally suited for advanced surface mount
printed circuit board applications
•Designed for long life and durability
•Ideal for use with most standard probes, clips and hooksS
•Efficient, safe, board level testing
•Unique design provides exceptional strength and durability
•Simplifies testing on dense SMT circuit boards
Pad Layout
Pad Layout
.135
[3.4]
.070
[1.80]
.105 [2.7]
.040 [1.00]
.040 [1.00]
.060
[1.50]
MINIATURE
SUPPLIED ON TAPE AND REEL
SUPPLIED ON TAPE AND REEL
CAT. NO. 5015 - 1000 pieces per reel CAT. NO. 5017 - 5000 pieces per reel
CAT. NO. 5019 - 1000 pieces per reel CAT. NO. 5029 - 5000 pieces per reel
.040 [1.02]
.090
[2.29]
.080
[2.03]
.150 [3.81]
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SMT TEST POINTS
61
SPECIFICATIONS
Contact Material:
.015 (.38) Phosphor Bronze
Contact Finish: Silver Plate
Tape Material: 12mm wide; 4mm pitch;
conductive polycarbonate carrier tape
meets ANSI/EIA-481 standard
.185 [4.7]
.135
[3.4]
•Ideal for use with standard probes, clips and hooks
•Efficient, safe, board level testing
•Unique design provides exceptional strength
and durability
•Simplifies testing on dense SMT circuit boards
Pad Layout
COMPACT
SUPPLIED ON TAPE AND REEL
CAT. NO. 5016 - 1000 pieces per reel CAT. NO. 5018 - 5000 pieces per reel
.040 [1.00]
.090 [2.30]
.112 [2.8]
.150 [3.8]
CAT. INSULATOR
NO. COLOR
5044 NONE
5045 RED
5046 BLACK
5048 SCREW INSTALLED
SMALL CLIP
•Solder Connection with Strain Relief
•Insulated or Non-Insulated
MATERIAL:
Clip: Steel, Nickel Plate
Insulator: Vinyl
MEDIUM CLIP
•Solder Connection with Strain Relief
•Insulated or Non-Insulated
MATERIAL:
Clip: Steel, Nickel Plate
Insulator: Vinyl
LARGE CLIP
•Solder Connection or Screw Connection
(Barrel Accepts Wire or Standard Banana Plugs)
•Insulated or Non-Insulated
MATERIAL:
Clip: Steel, Nickel Plate
Insulator: Vinyl
JAW SPREAD
.236 (6.0) max.
JAW SPREAD
.315 (8.0) max.
ALLIGATOR CLIPS
CAT. INSULATOR
NO. COLOR
5033 NONE
5034 RED
5035 BLACK
5036 GREEN
5037 YELLOW
CAT. INSULATOR
NO. COLOR
5038 NONE
5039 RED
5040 BLACK
JAW SPREAD
.236 (6.0) max.
1.97 (50.0)
5048 only
.445
(11.3)
.750 (19.1)
1.40 (35.5)
.335 (8.5)
1.06 (27.0)
.295 (7.5)
SCREW TERMINALS
62
Mounting Detail
.073 [1.85] DIA.
(4) PLS
.295 [7.5]
.197 [5.0]
These easy-to-mount, multipurpose screw type terminals are a practical,
low-cost alternative to PC screw type edge connectors, barrier blocks, terminal
boards and terminal strips. Steadfast and easy to install, will accommodate
solid or stranded wire, crimp type terminals or lugs. Multi-placement of these
low-profile terminals make them ideally suited for high density packaging.
Supplied unassembled or with screw installed and captivated.
PRINCIPAL FEATURES
•Low profile
•Stable, no-rock design with exclusive anti-rotational feature
•Easily mounts with four legs into pre-drilled or punched holes
•Accepts 14-22 AWG solid or stranded wire, crimp type terminals or lugs
•Ideally suited for high-density packaging
•Available in horizontal or vertical mounting
•Space-saving and time saving
•Easy accessibility for PC board testing
•Binding screw is positioned above board level to avoid wicking during
wave soldering
•Terminals are made of Brass with Tin Plate
•Supplied with a combination drive 6-32 binding head screw
SPECIFICATIONS
Rated: 15 Amps
Terminal:
.032 (.81) Brass, Matte Tin Plate
Binding Head Screw:
Brass, Nickel Plate
.073 [1.85] DIA.
(4) PLS
.197 [5.0]
.276 [7.0]
SPECIFICATIONS
Rated: 15 Amps
Terminal:
.032 (.81) Brass, Matte Tin Plate
Binding Head Screw:
Brass, Nickel Plate
SNAP-IN
PC MOUNT PC MOUNT
PC MOUNT
SNAP-IN
PC MOUNT Mounting Detail
.073 [1.85] DIA.
(4) PLS
.200 [5.1]
.295 [7.5]
Mounting Detail
.452 [11.5]
6-32 x .250 [6.3] L.
SCREW
.197 [5.0]
.512
[13.0]
.060 [1.52]
(4) PLS
.312
[7.9]
.138
[3.5]
.327
[8.3]
.280
[7.1]
.295
[7.5]
.312
[7.9]
.060 [1.52]
(4) PLS
.512
[13.0]
.280
[7.1]
.327
[8.3]
.295
[7.5]
.452 [11.5]
.138
[3.5] .197 [5.0]
6-32 x .250 [6.3] L.
SCREW
.210 [5.4]
.276 [7.0]
.440
[11.2]
.187 [4.8]
.310 [7.9]
.310 [7.9]
6-32 x .250 [6.3] L.
SCREW
.060 [1.52]
(4) PLS
.197 [5.0]
.310 [7.9]
.210 [5.4]
.197 [5.0]
.310 [7.9]
.440
[11.2]
.276 [7.0]
6-32 x .250 [6.3] L.
SCREW
.197 [5.0]
.060 [1.52]
(4) PLS
6-32 x .250 [6.3] L.
SCREW
.295
[7.5]
REF.
.450 [11.5]
.200 [5.1]
45°
.412
[10.5] .555
[14.1]
.190 [4.9]
.037 [1.0]
.130 [3.3]
.125
[3.2]
REF.
.060 [1.52]
(4) PLS
SPECIFICATIONS
Rated: 15 Amps
Terminal:
.032 (.81) Brass, Matte Tin Plate
Binding Head Screw:
Brass, Nickel Plate
PC MOUNT
Color coded screws available
(add color screw suffix to Cat. No.)
Color coded screws available
(add color screw suffix to Cat. No.)
PC SCREW TERMINALS
HORIZONTAL TYPE
VERTICAL TYPE
45°MINI
CAT. NO. 7780 (No Screw Supplied)
CAT. NO. 7691 (Screw Supplied Unassembled)
CAT. NO. 7693 (Screw Installed & Captivated)
CAT. NO. 7782 (No Screw Supplied)
CAT. NO. 8191 (Screw Supplied Unassembled)
CAT. NO. 7701 (Screw Installed & Captivated)
CAT. NO. 7779 (No Screw Supplied)
CAT. NO. 7690 (Screw Supplied Unassembled)
CAT. NO. 7692 (Screw Installed & Captivated)
CAT. NO. 7781 (No Screw Supplied)
CAT. NO. 8190 (Screw Supplied Unassembled)
CAT. NO. 7700 (Screw Installed & Captivated)
COLOR SELECTION:
Select desired screw terminal
and add color suffix to the
screw terminal Cat. No.
HEAD COLOR SUFFIX
RED -2
BLACK -3
WHITE -4
BLUE -5
GREEN -6
YELLOW -7
NICKEL none 7693-5
7700
7700-3
7701
7702-7
CAT. NO. COLOR SUFFIX
Ex: XXXX -X
CAT. NO. 7783 (No Screw Supplied)
CAT. NO. 8189 (Screw Supplied Unassembled)
CAT. NO. 7702 (Screw Installed & Captivated)
7693-4
7692-2
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Color coded screws
available (add color
screw suffix to Cat. No.)
•Color coded screws
available (add color
screw suffix to Cat. No.)
•Color coded screws
available (add color
screw suffix to Cat. No.)
•Color coded screws
available (add color
screw suffix to Cat. No.)
•Color coded screws
available (add color
screw suffix to Cat. No.)
[5.4]
.200 [5.1]
.214
.062 [1.57] DIA.
(4) PLS
Mounting Detail
.180 [4.6]
.180 [4.6]
.350 [8.9]
[6.4]
.214 [5.4] .200
[5.1]
.050
[1.3]
(4) PLS
.250
4-40 X .250 [6.3] L.
SCREW
CAT. NO. 7774 (No Screw Supplied)
CAT. NO. 7773 (Screw Supplied Unassembled)
7773
SNAP-IN
PC MOUNT
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SCREW TERMINALS
PRINCIPAL FEATURES
•Compact, heavy duty design
•Six snap-in legs for total stability
•Serrated top surface secures connection
COLOR CODED SCREW TERMINAL SELECTION GUIDE
PC SCREW TERMINALS
63
.067 [1.7] DIA.
(2) PLS
.312 [7.9]
Mounting Detail .187 [4.7]
.276
[7.0]
.144 [3.7]
DIA.
.062 [1.57] DIA. (4) PLS
Mounting Detail
.341 [8.7]
.197
[5.0]
.073 [1.85] DIA.
(4) PLS
Mounting Detail
.076 [1.93] DIA. (6) PLS
.394
[10.0]
.197
[5.0]
.276
[7.0]
SPECIFICATIONS
Rated: 15 Amps
Terminal: .032 (.81) Brass, Matte Tin
Plate
Binding Head Screw: Brass, Nickel Plate
SPECIFICATIONS
Rated: 15 Amps
Terminal: .032 (.81) Brass, Mattte Tin Plate
Binding Head Screw: Brass, Nickel Plate
.310
[7.9]
.059 [1.5]
(4) PLS
.197 [5.0]
6-32 x .250 [6.3] L.
SCREW
.197 [5.0]
.134 [3.4]
.276
[7.0]
.310 [7.9]
SPECIFICATIONS
Rated: 30 Amps
Terminal: .032 (.81) Brass, Matte Tin Plate
Binding Head Screw: Brass, Nickel Plate
Mounting Detail SPECIFICATIONS
Rated: 30 Amps
Terminal:
.045 (1.14) Brass, Matte Tin Plate
Screw: Stainless Steel
.101 [2.6] DIA. (6) PLS
.425
10.8
.410
[10.4]
.205
[5.2]
.055 [1.4]
(2) PLS
.312
[7.9]
.250 [6.3]
6-32 X .250 [6.3] L.
SCREW
.187 [4.7]
.250 [6.4]
.343 [8.7]
•Combination drive, binding
head screw
•Color coded screws
available (add color
screw suffix to Cat. No.)
10-32 x .375 [9.5] L.
SCREW
.060 [1.5] (6) PLS
.453 [11.5]
.226 [5.7]
.410 [10.4]
.470 [11.9]
.425
[10.8]
.205
[5.2]
.470 [11.9]
6-32 x .250 [6.3] L.
SCREW
.394
[10.0]
.507 [12.9]
.250 [6.3]
.197
[5.0]
.310 [7.9]
.210 [5.3]
.060 [1.5] (6) PLS
.276
7.0
CAT. NO. 7784 (No Screw Supplied)
CAT. NO. 8198 (Screw Supplied Unassembled)
CAT. NO. 7778 (Screw Installed & Captivated)
CAT. NO. 7785 (No Screw Supplied)
CAT. NO. 8195 (Screw Supplied Unassembled)
CAT. NO. 7775 (Screw Installed & Captivated)
CAT. NO. 7787 (No Screw Supplied)
CAT. NO. 8196 (Screw Supplied Unassembled)
CAT. NO. 7786 (No Screw Supplied)
CAT. NO. 8197 (Screw Supplied Unassembled)
CAT. NO. 8199 (Screw Installed & Captivated)
Mounting Detail
8199-6 8196
EXTENDED HEAVY DUTY
HEAVY DUTY
.382 [9.7]
.060
[1.5]
.383 [9.7]
.209 [5.3]
.375 [9.5]
10-32 X .375 [9.5] L.
SCREW
.197
[5.0]
.341 [8.7]
CAT. NO. 7791 (No Screw Supplied)
CAT. NO. 8174 (Screw Supplied Unassembled)
Color Coded Screw Terminals
provide:
•Quick identification
•Visibility for field service
troubleshooting
SPECIFICATIONS
Combination Binding Head:
Standard screw is Brass,
Nickel Plate. For painted,
color head, add suffix as
shown.
•Available for screw terminals where noted.
6-32 x
.250 [6.3] L.
THREAD
CAT. NO. COLOR SUFFIX
Ex: XXXX -X
COLOR SELECTION:
Select desired screw terminal
and add color suffix to the
screw terminal Cat. No.
8199-2 7692-7
7693-5 7700-3
7775-4
7778-7
7699-6
7701
HEAD COLOR SUFFIX
RED -2
BLACK -3
WHITE -4
BLUE -5
GREEN -6
YELLOW -7
NICKEL none
Refer to page 133 for color screws only
30 AMP - VERTICAL
VERTICAL TYPE
LOW PROFILE VERTICAL TYPE
•Color coded screws
available (add color
screw suffix to Cat. No.)
•Color coded screws
available (add color
screw suffix to
Cat. No.)
•Color coded screws
available (add color
screw suffix to Cat. No.)
.276 [7.0]
.197 [5.0]
.073 [1.85] DIA.
(4) PLS
Mounting Detail
.310 [7.9]
.197 [5.0]
.718
[18.3]
.310 [7.9]
.276
[7.0] .060 [1.52]
(4) PLS
.197 [5.0]
.947
[24.1]
6-32 x .250 [6.3] L.
SCREW
PC MOUNT
CAT. NO. 7789 (No Screw Supplied)
CAT. NO. 7697 (Screw Supplied Unassembled)
CAT. NO. 7699 (Screw Installed & Captivated)
7699-6
7775-2
8174
SEMS SCREW TERMINALS
64
SPECIFICATIONS
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw & Washer: Steel, Nickel Plate
PC MOUNT
SNAP-IN
PC MOUNT (4) PLS
6-32 SEMS
SCREW
.060 [1.52]
.187 [4.8]
.440
[11.2]
.197
[5.0]
.276
[7.0] (4) PLS
6-32 SEMS
SCREW
[7.0] .197 [5.0]
.060 [1.52]
.440
[11.2]
.276
.197 [5.0]
REF.
(4) PLS
.295
[7.49]
[11.43]
.450
45°
6-32 SEMS
SCREW
.555
[14.1]
.412
[10.5]
.060 [1.52]
.200 [5.1]
(4) PLS
6-32 SEMS
SCREW
.718
[18.3]
.197
[5.0]
.276
[7.01]
.947
[24.1]
.197 [5.0]
.060 [1.52]
SPECIFICATIONS
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw & Washer: Steel, Nickel Plate
PC MOUNT
PC MOUNT
CAT. NO. 7697-SEMS (Screw Supplied Unassembled)
CAT. NO. 7699-SEMS (Screw Installed & Captivated)
SEMS SCREW TERMINALS
30 AMP
15 AMP
CAT. NO. 7691-SEMS (Screw Supplied Unassembled)
CAT. NO. 7693-SEMS (Screw Installed & Captivated)
CAT. NO. 8191-SEMS (Screw Supplied Unassembled)
CAT. NO. 7701-SEMS (Screw Installed & Captivated)
CAT. NO. 8189-SEMS (Screw Supplied Unassembled)
CAT. NO. 7702-SEMS (Screw Installed & Captivated)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SPECIFICATIONS
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw & Washer: Steel, Nickel Plate
SPECIFICATIONS
Screw & Washer: Steel, Nickel Plate
(6) PLS
6-32 SEMS
.460 [11.7]
.060 [1.52]
.197 [5.0]
SCREW
.507 [12.9]
.394 [10.0]
.276
[7.0]
6-32 THREAD
.310 [7.9]
.266 [6.8]
DIA.
SQUARE
.250 [6.4]
CAT. NO. 8197-SEMS (Screw Supplied Unassembled)
CAT. NO. 8199-SEMS (Screw Installed & Captivated) CAT. NO. 9920 (SEMS Screw Only)
SPECIFICATIONS
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw & Washer: Steel, Nickel Plate
SNAP-IN
PC MOUNT
SNAP-IN
PC MOUNT
PC MOUNT
.512
.452 [11.5]
.138 [3.5]
[13.0]
.197 [5.00]
.060 [1.52]
6-32 SEMS
SCREW
.280
[7.1]
.295
[7.5]
.312
[7.9]
(4) PLS
6-32 SEMS
SCREW .452 [11.5]
.512
[13.0]
.060 [1.52]
.197 [5.0]
.308
[7.8]
.312
[7.9]
CAT. NO. 7690-SEMS (Screw Supplied Unassembled)
CAT. NO. 7692-SEMS (Screw Installed & Captivated)
CAT. NO. 8195-SEMS (Screw Supplied Unassembled)
CAT. NO. 7775-SEMS (Screw Installed & Captivated)
CAT. NO. 8190-SEMS (Screw Supplied Unassembled)
CAT. NO. 7700-SEMS (Screw Installed & Captivated)
CAT. NO. 8198-SEMS (Screw Supplied Unassembled)
CAT. NO. 7778-SEMS (Screw Installed & Captivated)
SEMS Screw Terminals provide quick and secure attachment of wire leads. SEMS screw has
captivated, free spining lock washer, eliminated twisting of wire when tightening lead to terminal.
Washer will rise with head of screw when unscrewed.
6-32 SEMS
SCREW
.331 [8.4]
.059 [1.50]
(4) PLS
.134 [3.4]
.276
[7.01] .232
[5.9] (2) PLS
6-32 SEMS
SCREW
.312
[7.9]
.437
[11.1]
.055 [1.40]
.250
[6.4]
PC MOUNT
SPECIFICATIONS
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw & Washer: Steel, Nickel Plate
SNAP-IN
PC MOUNT
Color coded screws available
(add color screw suffix to Cat. No.)
Mounting Detail
7.50
5.00
1.85 DIA. HOLE
(4) PLS
5.00
7.00
1.85 DIA. HOLE
(4) PLS
SNAP-IN
PC MOUNT PC MOUNT
PC MOUNT
SNAP-IN
PC MOUNT
SNAP-IN
PC MOUNT
Color coded
screws available
(add color screw
suffix to Cat. No.)
Mounting Detail
6.00 LONG
SCREW
5.00
1.52
11.50
6.60 5.08
5.10
7.90
7.11
6.00 LONG
SCREW
7.11
7.81 5.00
5.08
1.52
5.10
7.90
11.50
6.00 LONG
SCREW
8.00
1.52
5.00
4.75
6.45
7.00
8.00
6.00 LONG
SCREW 8.00
1.52
5.00
5.00
6.45
7.00
8.00
SPECIFICATIONS
Rated: 15 Amps
Terminal: .80 Brass, Matte Tin Plate
Screw: Brass, Nickel Plate
SPECIFICATIONS
Rated: 15 Amps
Terminal: .80 Brass, Matte Tin Plate
Screw: Brass, Nickel Plate
Color coded screws available
(add color screw suffix to Cat. No.)
METRIC PC SCREW TERMINALS
VERTICAL TYPE
30 AMP - VERTICAL TYPE
M4 M5
HEAD COLOR SUFFIX
RED -2
BLACK -3
WHITE -4
BLUE -5
GREEN -6
YELLOW -7
NICKEL none
7693-5
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PRINCIPAL FEATURES
•Compact, heavy duty design
•Six snap-in legs for total stability
•Serrated top surface secures connection
1.93 DIA. HOLE
(6) PLS
10.00
7.00
5.00
SPECIFICATIONS
Rated: 30 Amps
Terminal: .80 Brass, Matte Tin Plate
Screw: Brass, Nickel Plate
Mounting Detail
SPECIFICATIONS
Rated: 30 Amps
Terminal: 1.14 Brass, Matte Tin Plate
Screw: Brass, Nickel Plate 5.21
10.80
2.57 DIA. HOLE
(6) PLS
10.41
M5 x 10.00 L.
SCREW
11.94
17.02
1.52
10.80
11.94
10.41
11.51
12.88
6.35
11.68
1.52
10.00
7.00
7.87
M4 x 6.00 L.
SCREW
Mounting Detail
M3 THREAD M4 THREAD
CAT. NO. CAT. NO.
7790 No Screw Supplied 7792
7689* Screw Supplied Unassembled 7793
7695* Screw Installed & Captivated 7794
*Available with color Coded Screws
These easy-to-mount, multipurpose screw type terminals are a practical,
low-cost alternative to PC screw type edge connectors, barrier blocks, termi-
nal boards and terminal strips. Steadfast and easy to install, will accommo-
date solid or stranded wire, crimp type terminals or lugs. Multi- placement
of these low-profile terminals make them ideally suited for high density
packaging. Supplied unassembled or with screw installed and captivated.
COLOR SELECTION:
Select desired screw terminal
and add color suffix to the
screw terminal Cat. No.
PRINCIPAL FEATURES
•Stable, no-rock design with exclusive anti-rotational feature
•Easily mounts with four legs into pre-drilled or punched holes
•Accepts 14-22 AWG solid or stranded wire, crimp type
terminals or lugs
•Ideally suited for high-density packaging
•Easy accessibility for PC board testing
•Binding screw is positioned above board level to avoid
wicking during wave soldering
METRIC SCREW TERMINALS
65
*Available with color Coded Screws
Refer to page 133
for color screws only
M3 THREAD M4 THREAD
CAT. NO. CAT. NO.
7770 No Screw Supplied 7767
7771* Screw Supplied Unassembled 7768
7772* Screw Installed & Captivated 7769
*Available with color Coded Screws
M3 THREAD M4 THREAD
CAT. NO. CAT. NO.
7788 No Screw Supplied 7795
7698* Screw Supplied Unassembled 7796
7696* Screw Installed & Captivated 7797
*Available with color Coded Screws
CAT. NO.
7798 No Screw Supplied
7799 Screw Supplied Unassembled
7800 Screw Installed & Captivated
CAT. NO.
7807 No Screw Supplied
7808 Screw Supplied Unassembled
HORIZONTAL TYPE
SNAP-IN
PC MOUNT
M3 THREAD M4 THREAD
CAT. NO. CAT. NO.
7760 No Screw Supplied 7764
7761* Screw Supplied Unassembled 7765
7762* Screw Installed & Captivated 7766
CAT. NO. 1209 (Screw Installed)
CAT. NO. 1207 (Screw Supplied Unassembled)
CAT. NO. 1205 (No Screw Supplied)
CAT. NO. 1283 (Screw Installed)
CAT. NO. 1208 (Screw Supplied Unassembled)
CAT. NO. 1206 (No Screw Supplied)
CAT. NO. 1299 (Screw Supplied Unassembled)
CAT. NO. 1202 (Screw Installed & Captivated)
CAT. NO. 1201 (Screw Installed & Captivated)
CAT. NO. 1298 (Screw Supplied Unassembled)
MINI BINDING POSTS
SCREW TERMINALS
66
HEAVY DUTY SCREW TERMINALS - 30 AMP
These sturdy, low cost screw terminals, feature an anti-rotation tab for use with spade terminals.
They are available with the screw installed and captivated, the screw unassembled or without a screw.
.093
[2.36]
.187 [4.8]
.406 [10.3]
.375 [9.6]
.437 [11.1]
DIA.
.250 [6.4]
.125 [3.2]
10-32 x .250 [6.3] L.
SCREW
.156 [4.0]
PRINCIPLE FEATURES
•Easy to connect using solid or stranded wire,
crimp lugs or terminals
•Anti-rotation tab for use with spade terminals
•Supplied with screw installed and captivated,
with screw unassembled, or without screw
•Stainless steel screw will not wick
SPECIFICATIONS
Rated: 15 Amps
Terminal: .032 (.81) Brass, Matte Tin Plate
Screw: Combination drive, Stainless Steel
SPECIFICATIONS
Rated: 30 Amps
Terminal: .062 (1.6) Brass, Matte Tin Plate
Screw: Combination drive, Stainless Steel
Mounting Detail
Mounting Detail
These heavy duty terminals are available with the screw installed or unassembled, and
feature easy access to connect solid or stranded wire, crimp type lugs or terminals.
.375 [9.5] DIA.
8-32 x .375 [9.5] L.
SCREW
.115 [2.9]
.531
[13.5]
.437
[11.1]
.140
[3.6]
.297
[7.6]
.406 [10.3]
.109 [2.8]
45°
45°
.109 [2.8]
.406 [10.3]
.297
[7.6]
.140
[3.6]
.437
[11.1] .531
[13.5]
.115 [2.9]
10-32 x .375 [9.5] L.
SCREW
.375 [9.5] DIA.
.210 [5.3] DIA.
.077 [1.96]
.126 [3.2]
.470 [12.0]
SPECIFICATIONS
Rated: 15 Amps
Terminal: .064 (1.6) Brass, Matte Tin Plate
Screw: Brass, Nickel Plate
SPECIFICATIONS
Rated: 30 Amps
Terminal: .064 (1.6)
Brass, Matte Tin Plate
Screw: Steel, Nickel Plate
Mounting Detail
.470 [12.0]
.126 [3.2]
.077 [1.96]
.210 [5.3] DIA.
Mounting Detail
PRINCIPLE FEATURES
•Anti-rotation tab for use with spade terminals
•Below the board notched leg, to facilitate mechanical
and solder connections
•Easy to connect using solid or stranded wire,
crimp lugs or terminals
•Available with screw installed, unassembled, or without screw
.187 [4.7] DIA.
.110
[2.8]
.340 [8.7]
.210 [5.3] DIA. .075 [1.9]
.142 [3.6]
.472 [12.0]
.156 [4.0]
.328
[8.4]
.187 [4.8]
.094
[2.4]
.375 [9.5] DIA.
.100 [2.6]
.062
[1.57]
6-32 x .250 [6.3] L.
SCREW
LOW PROFILE SCREW TERMINALS
10-32
8-32
CAT. NO. 1284 (No Screw Supplied)
CAT. NO. 1293 (No Screw Supplied)
10-32
6-32
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
THRU HOLE
CAT. NO. 8730 (Screw Installed)
.102 [2.6]
.039 [1.00]
DIA.
.187 [4.8]
.197 [5.0]
.157 [4.0]
SQUARE M2.5 x .156 [4.0] L.
SCREW
.110 [2.8] DIA.
HOLE THRU
SPECIFICATIONS
Terminal: Brass, Tin Plate
Screw: Steel, Zinc Plate
Mounting Hole: .047 (1.2)
Current Rating: 15 AMP
WIRE CONTACT
CAT. NO. 8737 (Screw Installed)
CONTACT
.197 [5.0]
.039 [1.0]
.192 [4.9] .105 [2.7] DIA.
THRU.
.158 [4.0]
SQUARE
M2.5 X 4.0 L.
SCREW
SPECIFICATIONS
Terminal: Brass, Tin Plate
Screw: Steel, Zinc Plate
Contact: Phoshorus Bronze, Tin Plate
Mounting Hole: .047 (1.2)
Current Rating: 15 AMP
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SCREW TERMINALS
BINDING POST TERMINALS (RIVET TYPE)
CAT. NO. 1215
Mounting Hole: .220 (5.6) Mounting Hole: .225 (5.7) Mounting Hole: .255 (6.5)
SPECIFICATIONS
Terminal: .020 (.51) Steel, Tin Plate
Screw: Steel, Zinc Plate,
(Screw Installed & Captivated)
Rated: 15 Amps
SPECIFICATIONS
Terminal: .020 (.51) Steel, Tin Plate
Screw: Steel, Zinc Plate,
(Screw Installed & Captivated)
Rated: 15 Amps
SPECIFICATIONS
Terminal: .032 (.81) Steel, Tin Plate
Screw: Steel, Nickel Plate
(Screw Installed & Captivated)
Rated: 15 Amps
SPECIFICATIONS
Terminal:
.032 (.81) Steel, Tin Plate
Screw: Steel, Nickel
Plate (Screw Installed
& Captivated)
Rated: 15 Amps
.312 [7.9]
.125 [3.2]
.156 [4.0]
.203 [5.2]
.187 [4.8]
.562 [14.3]
.100
[2.6]
.375 [9.5]
DIA.
.093 [2.36]
.062
[1.57]
.093
[2.36]
DIA.
6-32 x .375 [9.5] L.
SCREW
.312 [7.9]
.156 [4.0]
.203 [5.2]
.125 [3.2] .187 [4.8]
.562 [14.3]
.093 [2.36]
.093
[2.36]
DIA.
.062
[1.57]
.100
[2.6]
.375 [9.5]
DIA.
SCREW
6-32 x .375 [9.5] L.
.330
[8.4]
.280
[7.1]
.125 [3.2]
.110
[2.8]
.210
[5.4]
Mounting Detail
.187 [4.7]
[14.3]
.562
.100 [2.5]
.308
[7.8]
.375 [9.5]
.937
[23.8]
[14.3]
.562
.100 [2.54]
.308
[7.8]
.375 [9.5]
.308
[7.8]
.375 [9.5]
.308
[7.8]
.375 [9.5] 6-32 SCREW
6-32 SCREW
SCREW TERMINALS
67
CAT. NO. 1248
CAT. NO. 1272 CAT. NO. 1273
CAT. NO. 1536CAT. NO. 1535CAT. NO. 1537
OFFSET LEG STRAIGHT LEG
SOLDER TAB QUICK FIT
4-40 6-32 8-32
SOLDER
.216 [5.5]
KNURL
.125 [3.2]
.141
[3.6]
.140 [3.6]
.187 [4.8]
.281 [7.2]
BODY DIA.
4-40 x
.187 [4.7] L.
SCREW
.220 [5.6]
KNURL
.250 [6.4]
.125 [3.2]
.140
[3.6]
.172 [4.4]
.312 [7.9]
BODY DIA.
6-32 x
.187 [4.7] L
SCREW
.145 [3.7]
.250 [6.4]
KNURL
.204 [5.2]
.171
[4.4] .312 [7.9]
.343 [8.7]
BODY DIA.
8-32 x
.187 [4.7] L.
SCREW
SPECIFICATIONS Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate (Screw Supplied Unassembled)
FOR .093 (2.38) BOARD FOR .093 (2.38) BOARD FOR .125 (3.2) BOARD
SPECIFICATIONS
Terminal: .032 (.81) Steel,Tin Plate
Screw: Steel, Nickel Plate
(Screw Installed & Captivated)
Rated: 15 Amps
CAT. NO. 1232
.312 [7.9]
.203 [5.2]
.562 [14.3]
.093
[2.36]
.156 [4.0]
.187 [4.8]
.093 [2.36]
.062
[1.57]
.093
[2.35]
DIA.
.375 [9.5]
DIA.
.100
[2.6]
6-32 x .312 [7.9] L.
SCREW
.333 [8.5]
.110
[2.8]
.187 [4.7] DIA.
Mounting Detail
SPECIFICATIONS
Terminal: .032 (.81) Brass, Tin Plate
Screw: Steel, Nickel Plate
(Screw Installed & Captivated)
Rated: 15 Amps
SPECIFICATIONS
Material: .032 (.81) Brass, NIckel Plate
Rated: 15 Amps
CAT. NO. 1217
(2) PLS
.100 [2.54]
6-32 x .375 [9.5] L.
SCREW
.093 [2.36]
.250 [6.35]
.375 [9.5]
DIA.
.203 [5.16]
.563
[14.30]
.156 [3.96]
.125 [3.18]
.062
[1.57]
.312 [7.92]
1
25 [3.17]
.280
[7.11]
.330
[8.38]
.270
[6.90]
.110 [2.79]
Mounting Detail
.072
[1.83]
(4) PLS
.329
[8.4]
.217 [5.5]
.291
[7.4]
.144
[3.7]
Mounting Detail
QUICK-FIT
Mounting Detail
.312 [7.9]
SQR.
.216
[5.5]
.250
[6.4]
.064 [1.6]
(4) PLS.
.108 [2.7]
.365
[9.3]
6-32
THREAD
.070
[1.8]
.178 [4.5]
QUICK-FIT
Supplied
Unassembled
CAT. NO. 1251 (Screw Installed)
CAT. NO. 1247 (No Screw Supplied)
SPACERS & STANDOFFS
Designed for reliability and close tolerance dimensions our diverse
selection of spacers and standoffs provide solutions for any design
requirements. Available in a wide range of materials and styles, some of
the applications include:
•Mechanical support
•Component-to-board mounting requirements
•Board-to-Board PCB mounting
•Board-to-Chassis device mounting
•Eliminate the cost and bulk of backplanes
and card cages
•PC/104 & PC/104 plus module mounting
•High Temperature conditions
•Commercial, Military & Industrial environments
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application.
SPACERS & STANDOFFS
69
ASSORTMENT/MOUNT KITS
Clear Hole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Nylon support . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PC-104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
MOLDED PC SPACERS
Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Lock in - Lock in. . . . . . . . . . . . . . . . . . . . . 76-78
Lock in - Releasable. . . . . . . . . . . . . . . . . 76-78
Releasable . . . . . . . . . . . . . . . . . . . . . . . . . 76-78
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SPACERS
Clear Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Economy (Rolled). . . . . . . . . . . . . . . . . . . . . . . . 74
Retaining Spacer. . . . . . . . . . . . . . . . . . . . . . . . 75
Swage / Force Fit . . . . . . . . . . . . . . . . . . . . . . . . 73
Stacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
THREADED STANDOFFS
Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Female-Female . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Hinged. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Male-Female . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Swage / Force Fit . . . . . . . . . . . . . . . . . . . . . . . . 73
SECTION CONTENTS
.250 [6.4]
THREAD
THREAD A
AL
4-40 THREAD
STAINLESS
L STEEL BRASS ALUMINUM
LENGTH CAT NO. CAT NO. CAT NO.
.250 (6.4)*** 8715 8716 8717
.375 (9.5)** 2119 7210 8413
.500 (12.7) 2120 1952 8414
.625 (15.9) 2121 1953 8415
.750 (19.1) 2122 1954 8416
.875 (22.2) 2123 7211 8417
1.000 (25.4) 2124 1644 8418
1.125 (28.6) 2125 7212 8419
1.250 (31.8) 2126 1955 8420
1.375 (34.9) 2127 1956 8421
1.500 (38.1) 2128 1645 8422
1.625 (41.3) 2129 7214 8423
1.750 (44.5) 2130 7215 8424
2.000 (50.8) 2131 1646 8425
THREAD SIZE
L 4-40 6-32 8-32
LENGTH CAT. NO. CAT. NO. CAT. NO.
.250 (6.4)*** 4800 4814 4828
.375 (9.5) 4801 4815 4829**
.500 (12.7) 4802 4816 4830
.600 (15.2)*4799 - -
.625 (15.9) 4803 4817 4831
.750 (19.1) 4804 4818 4832
.875 (22.2) 4805 4819 4833
1.000 (25.4) 4806 4820 4834
1.125 (28.6) 4807 4821 4835
1.250 (31.8) 4808 4822 4836
1.375 (34.9) 4809 4823 4837
1.500 (38.1) 4810 4824 4838
1.625 (41.3) 4811 4825 4839
1.750 (44.5) 4812 4826 4840
2.000 (50.8) 4813 4827 4841
THREAD
SIZE A
4-40 .187 (4.7)
6-32 250 (6.4)
8-32 .375 (9.5)
8-32 THREAD
STAINLESS
L STEEL BRASS ALUMINUM
LENGTH CAT NO. CAT NO. CAT NO.
.250 (6.4)*** 8731 8732 8733
.375 (9.5)** 2149 7220 8426
.500 (12.7) 2150 1957 8427
.625 (15.9) 2151 1958 8428
.750 (19.1) 2152 1959 8429
.875 (22.2) 2153 7221 8430
1.000 (25.4) 2154 1960 8431
1.125 (28.6) 2155 7222 8432
1.250 (31.8) 2156 1961 8433
1.375 (34.9) 2157 1962 8434
1.500 (38.1) 2158 1963 8435
1.625 (41.3) 2159 7224 8436
1.750 (44.5) 2160 7225 8437
2.000 (50.8) 2161 1964 8438
2.500 (63.5) 2180 1965 8439
3.000 (76.2) 2181 1966 8440
6-32 THREAD
STAINLESS
L STEEL BRASS ALUMINUM
LENGTH CAT NO. CAT NO. CAT NO.
.250 (6.4)*** 8712 8713 8714
.375 (9.5) 2087 7200 8400
.500 (12.7) 2088 1944 8401
.600 (15.2)*5799 8799 6799
.625 (15.9) 2089 1945 8402
.750 (19.1) 2090 1946 8403
.875 (22.2) 2091 7201 8404
1.000 (25.4) 2092 1947 8405
1.125 (28.6) 2093 7202 8406
1.250 (31.8) 2094 1948 8407
1.375 (34.9) 2095 1949 8408
1.500 (38.1) 2096 1950 8409
1.625 (41.3) 2097 7203 8410
1.750 (44.5) 2098 7205 8411
2.000 (50.8) 2099 1951 8412
CHOICE OF:
Stainless: ASTM A581/A582 Brass: ASTM-B16 Aluminum: ASTM B211
Plating: Nickel (QQ-N-290) Plating: Clear Iridite (Mil-C-5541)
MALE/FEMALE THREADED STANDOFFS
HEX MALE/FEMALE STANDOFFS
70
MATERIAL: Nylon 6/6
PC 104 MOUNTING KITS NYLON STANDOFFS
MALE/FEMALE STANDOFFS
* PC/104 Standard Length
** Internal Thread .250 (6.4) Deep
*** Internal Thread .130 (3.3)/.150 (3.8) Deep
* Aluminum and brass kits supplied with steel hardware.
*PC/104 Standard Length
***Internal Thread .130 (3.3)/.150 (3.8) Deep
** Internal Thread .250 (6.4) Deep
*** Internal Thread .130 (3.3)/.150 (3.8) Deep
** Internal Thread .250 (6.4) Deep
*** Internal Thread .130 (3.3)/.150 (3.8) Deep
.250 [6.4]
THREAD
THREAD
L
A
TL
Application Note:
For PC/104 applications
use CAT. NO. 4799
THREAD TL A
SIZE EXTERNAL INTERNAL
4-40 .187 (4.7) .250 (6.4)
6-32 .250 (6.4) .375 (9.5)
8-32 .375 (9.5) .375 (9.5)
Application Note:
For PC/104 applications use
length .600 (15.3) 4-40 Thread
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Designed to ease the assembly of new modules and multi-board stacks.
•Each kit includes all the hardware that is required to mount a single-board.
Complete Kit Includes Four (4) each:
CAT. NO. Kit Description Standoff Screw Nut
4799-4 Nylon 4799 9328 9605
5799-4 Stainless Steel 5799 9901 7248-3
6799-4 Aluminum 6799 9301* 9600*
8799-4 Brass 8799 9301* 9600*
4-40 SCREW
4-40 HEX NUT
PC104 STANDOFF
.600 [15.2]
.187 [4.7]
.375 [9.5]
CHOICE OF:
Stainless: ASTM A581/A582 Brass: per ASTM-B16 Aluminum: ASTM B211 Nylon V2: 6/6 UL Rated 94V-2 Phenolic: PBE Grade Natural
Plating: Zinc ASTM B633 Plating: Clear Iridite Finish Nylon V0: 6/6 UL Rated 94V-0 Color Phenolic
FEMALE THREADED STANDOFFS
THREADED STANDOFFS
71
HEX
THREAD THREAD
L
HEX O.D.
ROUND
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
NOTE: All standoffs over 1.000 (25.4) are tapped .375 (9.5) min. both ends, except 4-40 standoffs which are tapped .250 (6.4) min.
.156
(3.9)
.187
(4.7)
.250
(6.3)
.250
(6.3)
.250
(6.3)
.156
(3.9)
.187
(4.7)
.250
(6.3)
.250
(6.3)
.250
(6.3)
2-56 THREAD
4-40 THREAD
HEX ROUND
HEX NYLON V2 NYLON V0 STAINLESS BRASS ALUMINUM BRASS ALUMINUM PHENOLIC O.D.
CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. LENGTH CAT. NO. CAT. NO. CAT. NO.
———1798A 1797A .187 (4.7) 1802A 1801A —
———1798B 1797B .250 (6.4) 1802B 1801B —
———1798C 1797C .312 (7.9) 1802C 1801C —
———1798D 1797D .375 (9.5) 1802D 1801D —
———1450 1891 .250 (6.4) 1547 2025 ——
———1803 1892 .375 (9.5) 1864 2026 —
———1656 1893 .500 (12.7) 1657 2027 —
———1804 1894 .625 (15.9) 1865 2028 —
———1656A 1895 .750 (19.1) 1657A 2029 —
———1805 1896 .875 (22.2) 1866 2030 —
———1656B 1897 1.000 (25.4) 1657B 2031 —
1902A 8440A 1921 1450A 2201 .250 (6.4) 1547A 3478 376
1902B 8440B 1921A 1450B 2202 .375 (9.5) 1547B 3479 377
1902C 8440C 1921B 1450C 2203 .500 (12.7) 1547C 3480 378
1902F 8440D — 1829 1808 .625 (15.9) 1867 1839 —
1902D 8440E 1921C 1450D 2204 .750 (19.1) 1547D 3481 379
1902G 8440F — 1830 1809 .875 (22.2) 1876 1846 —
1902E 8440G 1921D 1450E 2205 1.000 (25.4) 1547E 3482 380
——1921E 1831 2206 1.500 (38.1) 1877 3483 381
——1921F 1832 2207 2.000 (50.8) 1878 3484 382
1903A 8441A 1922 1451A 2208 .250 (6.4) 1548A 3485 383
1903B 8441B 1922A 1451B 2209 .375 (9.5) 1548B 3486 384
1903C 8441C 1922B 1451C 2210 .500 (12.7) 1548C 3487 385
1903F 8441D — 1451D 1813 .625 (15.9) 1548D 1847 —
1903D 8441E 1922C 1451E 2211 .750 (19.1) 1548E 3488 386
1903G 8441F — 1833 1816 .875 (22.2) 1879 1848 —
1903E 8441G 1922D 1635 2212 1.000 (25.4) 1548F 3489 387
——— 1636 1818 1.250 (31.8) 1881 1853 —
——1922E 1637 2213 1.500 (38.1) 1882 3490 388
———1638 1819 1.750 (44.5) 1883 1855 —
——1922F 1639 2214 2.000 (50.8) 1884 3491 389
——— 1642 1820 2.250 (57.2) 1885 1856 —
——— 1643 1825 2.500 (63.5) 1886 1857 —
1904A 8442A 1923 1474A 2215 .250 (6.4) 1692A 3492 390
1904B 8442B 1923A 1474B 2216 .375 (9.5) 1692B 3493 391
1904C 8442C 1923B 1474C 2217 .500 (12.7) 1692C 3494 392
1904F 8442D — 1834 1827 .625 (15.9) 1887 1858 —
1904D 8442E 1923C 1474D 2218 .750 (19.1) 1692D 3495 393
1904G 8442F — 1836 1828 .875 (22.2) 1888 1859 —
1904E 8442G 1923D 1474E 2219 1.000 (25.4) 1692E 3496 394
——1923E 1837 2220 1.500 (38.1) 1889 3497 395
——1923F 1838 2221 2.000 (50.8) 1899 3498 396
——1475A 1822A 1821A .375 (9.5) 3499A 3500A 468
——1475B 1822B 1821B .500 (12.7) 3499B 3500B 469
——1475C 1822C 1821C .625 (15.9) 3499C 3500C —
——1475D 1822D 1821D .750 (19.1) 3499D 3500D 470
——1475F 1822F 1821F 1.000 (25.4) 3499F 3500F 471
6-32 THREAD
8-32 THREAD
.312
(7.9) .312
(7.9)
10-32 THREAD
MALE/FEMALE FEMALE
CAT. NO. L CAT. NO.
5.0 HEX (M3 THREAD)
—6.0 25508
—8.0 25509
25501 10.0 25510
25502 12.0 25511
25503 15.0 25512
25504 18.0 25513
25505 20.0 25514
25506 25.0 25515
—6.0 25528
—8.0 25529
25521 10.0 25530
25522 12.0 25531
25523 15.0 25532
25524 18.0 25533
25525 20.0 25534
25526 25.0 25535
METRIC STANDOFFS AND SPACERS
72
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
6.0 HEX DIA. (M4 THREAD)
———5.0 24490 24410 24450
———6.0 24491 24411 24451
———8.0 24492 24412 24452
24301** 24325** 24349** 10.0 24493 24413 24453
24302*24326*24350*12.0 24494 24414 24454
24303 24327 24351 15.0 24495 24415 24455
24304 24328 24352 18.0 24496 24416 24456
24305 24329 24353 20.0 24497 24417 24457
24306 24330 24354 25.0 24498 24418 24458
5.5 HEX DIA. (M3 THREAD)
———5.0 24480 24400 24440
———6.0 24481 24401 24441
———8.0 24482 24402 24442
24295 24319 24343 10.0 24483 24403 24443
24296 24320 24344 12.0 24484 24404 24444
24297 24321 24345 15.0 24485 24405 24445
24298 24322 24346 18.0 24486 24406 24446
24299 24323 24347 20.0 24487 24407 24447
24300 24324 24348 25.0 24488 24408 24448
5.0 HEX DIA. (M3 THREAD)
———5.0 24470 24390 24430
———6.0 24471 24391 24431
———8.0 24472 24392 24432
24289 24313 24337 10.0 24473 24393 24433
24290 24314 24338 12.0 24474 24394 24434
24291 24315 24339 15.0 24475 24395 24435
24292 24316 24340 18.0 24476 24396 24436
24293 24317 24341 20.0 24477 24397 24437
24294 24318 24342 25.0 24478 24398 24438
THREAD
SIZE TL A
M2.5 4.0 5.0
M3 8.0 8.0
M4 10.0 11.0
MALE/FEMALE
* Internal Thread: 8.0mm deep ** Internal Thread: 6.0mm deep
THREAD
SIZE A
M3 8.0
M4 9.5
Material: Nylon 6/6, UL Rated 94V-2
Choice of: Steel, Zinc Plate • Nylon: 6/6, UL Rated 94V-2
CAT. NO. L DIM
8843 3.0
8844 4.0
8845 6.0
8846 8.0
8847 10.0
8848 12.0
8849 14.0
8850 16.0
8851 18.0
STEEL NYLON 6/6
CAT. NO. L CAT. NO.
M2.5 THREAD
29301 6.00 29331
29304 12.00 29334
29306 16.00 29336
M3 THREAD
29311 6.00 29341
29314 12.00 29344
29316 16.00 29346
29318 25.00 29348
M4 THREAD
29321 6.00 29351
29324 12.00 29354
29326 16.00 29356
29328 25.00 29358
•One end locks into chassis, the other end locks into the PC Board.
CHOICE OF:
Stainless: ASTM A581/A582 Brass: ASTM-B16 Aluminum: ASTM B211
Plating: Nickel Plating: Clear Iridite
(QQ-N-290) (Mil-C-5541)
L
FOR 1,57
THICK PCB
FOR 1,57
CHASSIS
4,83
3,18
6,00
FOR 4,00 DIA.
MOUNTING HOLE
FOR 4,00 DIA.
MOUNTING HOLE
Material: Nylon 6/6, UL Rated 94V-0
See page 132 for metric nuts
FEMALE MALE/FEMALE FEMALE
MALE/FEMALE FEMALE
STAINLESS BRASS ALUMINUM STAINLESS BRASS ALUMINUM
CAT. NO. CAT. NO. CAT. NO. L CAT. NO. CAT. NO. CAT. NO.
4.5 HEX DIA. (M2.5 THREAD)
—— —5.0 24460 24380 24420
—— —6.0 24461 24381 24421
—— —8.0 24462 24382 24422
24283 24307 24331 10.0 24463 24383 24423
24284 24308 24332 12.0 24464 24384 24424
24285 24309 24333 15.0 24465 24385 24425
24286 24310 24334 18.0 24466 24386 24426
24287 24311 24335 20.0 24467 24387 24427
24288 24312 24336 25.0 24468 24388 24428
L
A
TL THREAD
THREAD
A
L
A
HEX
THREAD
HEX
THREAD
L
L
THREAD
HEX
THREAD
HEX
THREAD
L
Note: Female standoffs longer than 19mm may be tapped from both ends
METRIC STANDOFFS METRIC NYLON STANDOFFS
METRIC NYLON LOCK-IN SUPPORT
METRIC SCREWS
Note: Female standoffs longer than
19mm may be tapped from both ends
6.0 HEX (M4 THREAD)
HC
CAT. NO. HEIGHT ABOVE PANEL HOLE
5058-2 .125 (3.2)
5060-2 .250 (6.4) .120 (3.0)
5061-2 .375 (9.5) For # 4
5062-2 .500 (12.7)
5059-2 .125 (3.2)
5063-2 .250 (6.4) .140 (3.5)
5064-2 .375 (9.5) For # 6
5065-2 .500 (12.7)
ROUND H L.D. SHANK HEX
CAT. NO. HEIGHT ABOVE PANEL DIAMETER CAT NO.
2-56 THREAD .156 (4.0) O.D.
1589-2 .125 (3.2) .125 (3.2) 1731-2
1590-2 .187 (4.7) .125 (3.2) 1734-2
1591-2 .250 (6.4) .125 (3.2) 1740-2
1596-2 .375 (9.5) .125 (3.2) 1743-2
4-40 THREAD .187 (4.7) O.D.
2260-2 .125 (3.2) .139 (3.5) 2270-2
2261-2 .187 (4.7) .139 (3.5) 2271-2
2262-2 .250 (6.4) .139 (3.5) 2272-2
2263-2 .375 (9.5) .139 (3.5) 2273-2
2264-2 .500 (12.7) .139 (3.5) 2274-2
4-40 THREAD .250 (6.4) O.D.
1560A .125 (3.2) .187 (4.7) 1653-2
1790-2 .187 (4.7) .187 (4.7) 1746-2
1650-2 .250 (6.4) .187 (4.7) 1627-2
1651-2 .375 (9.5) .187 (4.7) 1628-2
1623-2 .500 (12.7) .187 (4.7) 1629-2
1624-2 .625 (15.9) .187 (4.7) 1654-2
1625-2 .750 (19.1) .187 (4.7) 1655-2
1792-2 .875 (22.2) .187 (4.7) 1749-2
1652-2 1.000 (25.4) .187 (4.7) 1630-2
6-32 THREAD .250 (6.4) O.D.
1560B .125 (3.2) .187 (4.7) 1620-2
1612-2 .187 (4.7) .187 (4.7) 1752-2
1546 .250 (6.4) .187 (4.7) 1621-2
1561B .375 (9.5) .187 (4.7) 1622-2
1604-2 .500 (12.7) .187 (4.7) 1758-2
1605-2 .625 (15.9) .187 (4.7) 1759-2
1608-2 .750 (19.1) .187 (4.7) 1761-2
1796-2 .875 (22.2) .187 (4.7) 1775-2
1609-2 1.000 (25.4) .187 (4.7) 1784-2
THREADED
L
CAT. NO. LENGTH O.D. A THREAD
4860 .065 (1.7) .219 (5.6) .165 (4.2) 2-56
4861 065 (1.7) .219 (5.6) .184 (4.7)
4862 .125 (3.2) .219 (5.6) .184 (4.7)
4863 .250 (6.4) .219 (5.6) .184 (4.7) 4-40
4864 .375 (9.5) .219 (5.6) .184 (4.7)
4865 *.500 (12.7) .219 (5.6) .184 (4.7)
4866 .065 (1.7) .281 (7.1) .231 (5.9)
4867 .125 (3.2) .281 (7.1) .231 (5.9) 6-32
4868 .250 (6.4) .281 (7.1) .231 (5.9)
4869 .375 (9.5) .281 (7.1) .231 (5.9)
4870 *.500 (12.7) .281 (7.1) .231 (.59)
CLEAR HOLE
L
CAT. NO. LENGTH O.D. A HOLE
4850 .065 (1.7) .219 (5.6) .184 (4.7)
4851 .125 (3.2) .219 (5.6) .184 (4.7)
4852 .250 (6.4) .219 (5.6) .184 (4.7) .116 (2.9)
4853 .375 (9.5) .219 (5.6) .184 (4.7) For # 4
4854 .500 (12.7) .219 (5.6) .184 (4.7)
4855 .065 (1.7) .281 (7.1) .231 (5.9)
4856 .125 (3.2) .281 (7.1) .231 (5.9)
4857 .250 (6.4) .281 (7.1) .231 (5.9) .143 (3.6)
4858 .375 (9.5) .281 (7.1) .231 (5.9) For # 6
4859 .500 (12.7) .281 (7.1) .231 (5.9)
SWAGE THREADED STANDOFFS
SWAGE/FORCE FIT STANDOFFS
73
FORCE-FIT STANDOFFS
MOUNTING HOLES:
.147 (3.7) hole for 2-56
.166 (4.2) hole for 4-40
.213 (5.4) hole for 6-32
TOLERANCE ON MOUNTING HOLES:
+.003/-.000
A broaching-type fastener/standoff for installation in panels and circuit boards
.060 (1.52) and thicker made of plastic and other non-ductile materials. Available
threaded or with clearance holes. Easy to install, presses into punched or drilled holes.
MATERIAL: Stainless Steel per ASTM-A581/A582
ROUND HEX ROUND
O.D.
H
L.D.
.105 (2.7)
THREAD
HEX
L.D.
THREAD
H
.105 (2.7)
A
O.D.
L
.060
[1.52]
MAX.
O.D.
A
.060
[1.52]
MAX.
L
Threaded Clear Hole
MATERIAL: Brass, ASTM-B16,
Nickel Plate (QQ-N-290)
For .062 (1.52) thick boards
SWAGE CLEAR HOLE SPACERS SWAGE STAKING TOOLS
MATERIAL: Brass, ASTM-B16, Nickel Plate (QQ-N-290)
For .062 (1.52) thick boards
*Thread depth .375 (9.5)
Precision made staking tool kits are made from .250
(6.4) diameter heat treated steel, zinc plated. Each kit
includes the correct swage top staking tool anvil to
create a professional appearance. These tools may be
used with an arbor press or hand tapped.
CAT. NO. STANDOFF DIA. THREAD HOLE SIZE
TL-19 .156 (4.0) 2-56 —
TL-22 .187 (4.7) 4-40 —
TL-20 .250 (6.4) 4-40 —
TL-21 .250 (6.4) 6-32 .120 (3.0)
.109 [2.8]
.187 [4.8]
C
.250
[6.4]
H
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SPACER FOR I.D. O.D. REF.
# 4 .120 (3.0) .167 (4.3)
# 6 .148 (3.8) .193 (4.9)
# 8 .176 (4.5) .232 (5.9)
SCREW CLEARANCE
L# 4 # 6 # 8
LENGTH CAT. NO. CAT. NO. CAT. NO.
.750 (19.1) 418 425 432
.875 (22.2) 419 426 433
1.000 (25.4) 420 427 434
1.250 (31.8) 421 428 435
1.500 (38.1) 422 429 436
1.750 (44.5) — 430 437
2.000 (50.8) — — 438
CAT. L T D
NO. LENGTH O.D. THREAD DEPTH
7710 .250 (6.4) .250 (6.4) 6-32 THRU
7711 .500 (12.7) .250 (6.4) 6-32 .156 (4.0)
7712 .375 (9.5) .375 (9.5) 6-32 .156 (4.0)
7713 .500 (12.7) .375 (9.5) 6-32 .156 (4.0)
7714 .500 (12.7) .500 (12.7) 6-32 .140 (3.6)
7715 .750 (19.1) .500 (12.7) 6-32 .250 (6.4)
7716 1.000 (25.4) .500 (12.7) 6-32 .375 (9.5)
7717 1.500 (38.1) .500 (12.7) 6-32 .562 (14.3)
7718 2.500 (63.5) .500 (12.7) 6-32 .500 (12.7)
7719 2.500 (63.5) .750 (19.1) 1/4 - 20 .750 (19.1)
7720 4.000 (101.6 .750 (19.1) 1/4 - 20 .750 (19.1)
CAT. L T D
NO. LENGTH O.D. THREAD DEPTH NL #
7661 .500 (12.7) .375 (9.5) 6-32 .156 (4.0) NL523W01-004
7662 .625 (15.9) .375 (9.5) 6-32 .250 (6.4) NL523W01-005
7663 .625 (15.9) .500 (12.7) 8-32 .187 (4.7) NL523W02-005
7664 .750 (19.1) .375 (9.5) 6-32 .250 (6.4) NL523W01-006
7665 .750 (19.1) .500 (12.7) 8-32 .250 (6.4) NL523W02-006
7666 1.000 (25.4) .375 (9.5) 6-32 .375 (9.5) NL523W01-008
7667 1.000 (25.4) .500 (12.7) 8-32 .375 (9.5) NL523W02-008
7668 1.000 (25.4) .750 (19.1) 10-32 .375 (9.5) NL523W03-008
7669 1.250 (31.8) .375 (9.5) 6-32 .375 (9.5) NL523W01-010
7670 1.250 (31.8) .500 (12.7) 8-32 .375 (9.5) NL523W02-010
7671 1.250 (31.8) 1.000 (25.4) 1/4 - 20 .437 (11.1) NL523W04-010
7672 1.500 (38.1) .375 (9.5) 6-32 .375 (9.5) NL523W01-012
7673 1.500 (38.1) .500 (12.7) 8-32 .375 (9.5) NL523W02-012
7674 1.500 (38.1) .750 (19.1) 10-32 .375 (9.5) NL523W03-012
7675 1.500 (38.1) 1.000 (25.4) 1/4 - 20 .500 (12.7) NL523W04-012
7676 2.000 (50.8) .375 (9.5) 6-32 .375 (9.5) NL523W01-016
7677 2.000 (50.8) .500 (12.7) 8-32 .375 (9.5) NL523W02-016
7678 2.000 (50.8) .750 (19.1) 10-32 .375 (9.5) NL523W03-016
CLEAR L BRASS ALUMINUM
HOLE O.D. LENGTH CAT. NO. CAT. NO.
.125 (3.2) 1909 2036
.250 (6.4) 1454A 3457
.375 (9.5) 1454B 3458
.500 (12.7) 1454C 3459
.120 (3.0) .250 (6.4) .625 (15.9) 1919 2314
.750 (19.1) 1454D 3460
.875 (22.2) 1920 3402
1.000 (25.4) 1454E 3461
1.500 (38.1) 1924 3462
2.000 (50.8) 1925 3463
.125 (3.2) 1934 3403
.250 (6.4) 1457A 3464
.375 (9.5) 1457B 3465
.500 (12.7) 1457C 3466
.140 (3.5) .250 (6.4) .625 (15.9) 1935 3429
.750 (19.1) 1457D 3467
.875 (22.2) 1936 3438
1.000 (25.4) 1457E 3468
1.500 (38.1) 1937 3469
2.000 (50.8) 1938 3470
.125 (3.2) 1942 4258
.250 (6.4) 1480 3471
.375 (9.5) 1481 3472
.500 (12.7) 1482 3473
.171 (4.3) .250 (6.4) .625 (15.9) 2032 4259
.750 (19.1) 1483 3474
.875 (22.2) 2033 4260
1.000 (25.4) 1484 3475
1.500 (38.1) 2034 3476
2.000 (50.8) 2035 3477
.250 (6.4) 1662 4261
.375 (9.5) 1663 4262
.500 (12.7) 1664 4263
.625 (15.9) 1665 4264
.196 (5.0) .312 (7.9) .750 (19.1) 1666 4265
.875 (22.2) 1667 4266
1.000 (25.4) 1668 4267
1.500 (38.1) 1669 4268
2.000 (50.8) 1672 4269
ROUND CLEAR HOLE SPACERS
ALUMINUM ECONOMY SPACERS
CERAMIC STANDOFFS
SPACERS & STANDOFFS
74
•Made of flat strip aluminum and rolled on precision equipment.
•Assures maximum bearing surface, square ends.
Aluminum:
5052-H34 per QQ-A-250/8b
MATERIAL:
Brass: ASTM-B16, Nickel Plate (QQ-N-290)
Aluminum: ASTM B211, Clear Iridite (MIL-C-5541)
Nylon: Nylon 6/6, UL Rated 94V-2
Phenolic: PBE Grade Natural Color Phenolic
MATERIAL: Grade L5 Ceramic
•Ideal for very high temperature conditions
•Commercial and military types available
•Military types meet MIL-1-010,
NL # clearly marked
•Exceptional strength in compression and tension
•Withstands very high voltage without flashover
•Special sizes available upon request
SCREW CLEARANCE
L# 4 # 6 # 8
LENGTH CAT. NO. CAT. NO. CAT. NO.
.187 (4.7) 397 — —
.250 (6.4) 398 405 412
.312 (7.9) 399 406 413
.375 (9.5) 400 407 414
.437 (11.1) 401 408 415
.500 (12.7) 402 409 416
.625 (15.9) 403 410 417
BRASS
NYLON
•Tight Joint on Outside Diameter
COMMERCIAL
MILITARY
L
O.D.
HOLE
I.D.
O.D. L
L
O.D.
D
D
THREAD
NYLON PHENOLIC L CLEAR
CAT. NO. CAT. NO. LENGTH O.D. HOLE
875 — .125 (3.2)
876 360 .250 (6.4)
877 361 .375 (9.5)
878 362 .500 (12.7)
879 — .625 (15.9) .250 (6.4) .120 (3.0)
880 363 .750 (19.1) For #4
881 — .875 (22.2)
882 364 1.000 (25.4)
779 365 1.500 (38.1)
— 366 2.000 (50.8)
883 — .125 (3.2)
884 367 .250 (6.4)
885 368 .375 (9.5)
886 369 .500 (12.7)
887 — .625 (15.9) .250 (6.4) .140 (3.5)
888 370 .750 (19.1) For #6
889 — .875 (22.2)
890 371 1.000 (25.4)
789 372 1.500 (38.1)
— 373 2.000 (50.8)
891 — .125 (3.2)
892 1490 .250 (6.4)
893 1491 .375 (9.5)
894 1492 .500 (12.7)
895 — .625 (15.9) .250 (6.4) .171 (4.3)
896 1493 .750 (19.1) For #8
897 — .875 (22.2)
898 1494 1.000 (25.4)
799 374 1.500 (38.1)
— 375 2.000 (50.8)
790 453 .250 (6.4)
791 454 .375 (9.5)
792 455 .500 (12.7)
793 — .625 (15.9)
794 456 .750 (19.1) .312 (7.9) .196 (5.0)
795 — .875 (22.2) For #10
796 457 1.000 (25.4)
797 458 1.500 (38.1)
— 459 2.000 (50.8)
For #4
For #6
For #8
For #10
ALUMINUM
PHENOLIC
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
NYLON RETAINING SPACERS
HINGED STANDOFFS
RETAINING SPACERS & HINGED STANDOFFS
75
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Similar to our standard spacers, but with a specially
configured I.D. designed to grip the outside of the
screw shank. The spacer slides on the screw easily,
but is retained on the screw. For use in applications
requiring pre-assembly of the screw and spacer, to
reduce final assembly cost.
OD
ID
CLEAR HOLE
L
CAT. LDT
NO. LENGTH S P DIAMETER THREAD
357 .500 (12.2) .250 (6.4) .250 (6.4) .187 (4.7) 4-40
358 .500 (12.2) .312 (7.9) .250 (6.4) .250 (6.4) 6-32
359 .500 (12.2) .312 (7.9) .250 (6.4) .250 (6.4) 8-32
CAT. L D T
NO. LENGTH U P DIAMETER THREAD
351 .750 (19.1) .172 (4.4) .375 (9.5)
352 1.000 (25.4) .250 (6.4) .625 (15.9) .187 (4.7) 4-40
330 1.250 (31.8) .250 (6.4) .625 (15.9)
353 .750 (19.1) .172 (4.4) .375 (9.5)
354 1.000 (25.4) .250 (6.4) .625 (15.9) .250 (6.4) 6-32
331 1.250 (31.8) .250 (6.4) .625 (15.9)
355 .750 (19.1) .172 (4.4) .375 (9.5)
356 1.000 (25.4) .250 (6.4) .625 (15.9) .250 (6.4) 8-32
332 1.250 (31.8) .250 (6.4) .625 (15.9)
•Applications unlimited
•Time saving
•Space saving
•Interconnect circuits or services without danger of shorting
MATERIAL:
Brass, ASTM-B16. Zinc Plate and Yellow Chromate
FEMALE/FEMALE
MALE/MALE
MALE/FEMALE
D
.250
[6.4]
S
U
T
L
P
S
T
S
D
90°
L
CAT. LDT
NO. LENGTH S U DIAMETER THREAD
333 .625 (15.9) .250 (6.4) .172 (4.4)
334 .875 (22.2) .250 (6.4) .250 (6.4) .187 (4.7) 4-40
335 .625 (15.9) .312 (7.9) .172 (4.4)
336 .875 (22.2) .312 (7.9) .250 (6.4) .250 (6.4) 6-32
337 .625 (15.9) .312 (7.9) .172 (4.4) .250 (6.4) 8-32
338 .875 (22.2) .312 (7.9) .250 (6.4)
U
P
D
U
T
L
CAT. .198 (5.0) Clear Hole for #6 Screw
NO. LENGTH O.D. I.D.
2361 .125 (3.2)
2362 .250 (6.4)
2363 .375 (9.5)
2364 .500 (12.7) .312 .128
2365 .625 (15.9) (7.9) (3.3)
2366 .750 (19.1)
2367 .875 (22.2)
2368 1.00 (25.4)
CAT. .240 (6.1) Clear Hole for #8 Screw
NO. LENGTH O.D. I.D.
2381 .125 (3.2)
2382 .250 (6.4)
2383 .375 (9.5)
2384 .500 (12.7) .375 .152
2385 .625 (15.9) (9.5) (3.8)
2386 .750 (19.1)
2387 .875 (22.2)
2388 1.00 (25.4)
CAT. .277 (7.0) Clear Hole for #10 Screw
NO. LENGTH O.D. I.D.
2391 .125 (3.2)
2392 .250 (6.4)
2393 .375 (9.5)
2394 .500 (12.7) .500 .177
2395 .625 (15.9) (12.7) (4.5)
2396 .750 (19.1)
2397 .875 (22.2)
2398 1.00 (25.4)
CAT. .156 (3.9) Clear Hole for #4 Screw
NO. LENGTH O.D. I.D.
2341 .125 (3.2)
2342 .250 (6.4)
2343 .375 (9.5)
2344 .500 (12.7) .250 .102
2345 .625 (15.9) (6.4) (2.6)
2346 .750 (19.1)
2347 .875 (22.2)
2348 1.00 (25.4)
CAT. L
NO. LENGTH
8871 .187 (4.7)
8872 .250 (6.4)
8873 .375 (9.5)
8874 .500 (12.7)
8875 .625 (15.9)
INSULATED PC SPACER/SUPPORTS
• Board will be electrically insulated, eliminates need for insulating washers •No tool required for installation
• Easy snap-in assembly• One pieces design eliminates the need for additional screws and nuts
• Fits snug onto board • Accommodates varying board thicknesses • Flame retardant
•
One end permanently attaches to .070 (1.78) max. thick chassis
•
Other end tension fits to .062 (1.57) max. thick PC board
•
Board is easily releasable for repairs or upgrades
•
Low insertion force
SLIMLINE TENSION-FIT SLIMLINE LOCK-IN
STURDY TENSION-FIT STURDY LOCK-IN
STURDY LOCK-IN RELEASE SLIMLINE LOCK-IN RELEASE
•One end permanently attaches to .070 (1.78)
max. thick
chassis
•Other end permanently attaches to .062 (1.57)
max. thick
PC board
•Low insertion force
•Small footprint frees up board space.
•One end permanently attaches to .031(.79) - .078 (2.0) thick
chassis
•Other end tension fits to .062 (1.57) max thick PC board
•Board is easily releasable for repairs or upgrades
•Sturdy support due to high contact area
•Both ends permanently attaches to .031 (.79) - .078 (2.0)
thick chassis or board
•Sturdy support due to high contact area
•Locks onto .062 (1.57) thick PC board
•Board is positively locked until manually released
•Board is easily releasable for repairs or upgrades
•Sturdy support due to high contact area with chassis
•Locks onto .062 (1.57) thick PC board
•Board is positively locked until manually unlocked
•Board is easily releasable for repairs or upgrades
•Compact design uses smaller mounting holes
CAT. L
NO. LENGTH
8807 .187 (4.7)
8808 .250 (6.4)
8809 .375 (9.5)
8810 .500 (12.7)
8811 .625 (15.9)
8812 .750 (19.1)
8813 .875 (22.2)
8814 1.000 (25.4)
CAT. L
NO. LENGTH
8800 .187 (4.7)
8801 .250 (6.4)
8802 .375 (9.5)
8803 .500 (12.7)
8804 .625 (15.9)
8805 .750 (19.1)
8806 .875 (22.2)
CAT. L
NO. LENGTH
8815 .187 (4.7)
8816 .250 (6.4)
8817 .375 (9.5)
8818 .500 (12.7)
8819 .625 (15.9)
8820 .750 (19.1)
8821 .875 (22.2)
CAT. L
NO. LENGTH
1927B .250 (6.4)
1928B .375 (9.5)
1929B .500 (12.7)
1930B .625 (15.9)
1931B .750 (19.1)
1932B .875 (22.2)
1933B 1.000 (25.4)
CAT. L
NO. LENGTH
1927A .250 (6.4)
1928A .375 (9.5)
1929A .500 (12.7)
1930A .625 (15.9)
1931A .750 (19.1)
1932A .875 (22.2)
1933A 1.000 (25.4)
L.546
[13.9]
.400 [10.2]
.203 [5.2]
.275
[7.0]
FOR .187 [4.8] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
FOR .156 [4.0] DIA.
MOUNTING HOLE
CHASSIS
.070 [1.78]
MAX.
.280
[7.1]
.400 [10.2]
.562 [14.3]
L
FOR .187 [4.8] DIA.
MOUNTING HOLE
FOR .156 [4.0] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
.100
[2.6]
FOR .062 [1.57]
CHASSIS
.400 [10.2]
L
.280
[7.1]
FOR .062 [1.57]
THICK PCB
.562 [14.3]
FOR .062 [1.57]
CHASSIS
.218 [5.6]
FOR .156 [4.0] DIA.
MOUNTING HOLE
FOR .187 [4.8] DIA.
MOUNTING HOLE
L
.280
[7.1]
.562 [14.3]
.218 [5.6]
FOR
.062 [1.57]
CHASSIS
FOR .156 [4.0] DIA.
MOUNTING HOLE
.218 [5.6]
FOR
.062 [1.57]
THICK PCB
FOR .156 [4.0] DIA.
MOUNTING HOLE
.350 [8.9]
.546
[13.9]
L
.203 [5.2]
.275
[7.0]
FOR .156
[
4.0
]
DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
FOR .187 [4.8] DIA.
MOUNTING HOLE
CHASSIS
.070 [1.78]
MAX.
FOR .125 [3.2] DIA.
MOUNTING HOLE
FOR .125 [3.2] DIA.
MOUNTING HOLE
.156 [4.0]
FOR .062 [1.57]
CHASSIS
FOR .062 [1.57]
THICK PCB
.171 [4.4]
L
.343 [8.7]
.375 [9.5]
MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0
MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0
MATERIAL: Nylon 6/6, UL Rated 94V-0MATERIAL: Nylon 6/6, UL Rated 94V-0
INSULATED PC SPACERS/SUPPORTS
76
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.187 (4.8)
.187 (4.8)
.187 (4.8) .125 (3.2)
.187 (4.8)
.156 (4.0)
.156 (4.0) .156 (4.0)
.156 (4.0)
.156 (4.0)
.156 (4.0) .125 (3.2)
INSULATED PC SPACERS/SUPPORTS
77
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. LOutside Inside Mounting Screw
NO. LENGTH Diameter Diameter Hole Size
8829 .125 (3.2)
8830 .187 (4.7)
8831 .250 (6.4) .260 .125 .187 #4
8832 .375 (9.5) (6.6) (3.2) (4.7)
8833 .500 (12.7)
8834 .625 (15.9)
8835 .250 (6.4)
8836 .375 (9.5) .312 .153 .234 #6
8837 .500 (12.7) (7.9) (3.9) (5.9)
8838 .625 (15.9)
8839 .250 (6.4)
8840 .375 (9.5) .312 .169 .234 #8
8841 .500 (12.7) (7.9) (4.3) (5.9)
8842 .625 (15.9)
• Board will be electrically insulated, eliminates need for insulating washers •Easy snap-in assembly
•No tool required for installation •Designed for .062 (1.57) thick boards
STACKING SPACERSTHRU HOLE SPACERS
•
One piece design eliminates the need for additional screws and nuts
•
Slim design frees up board space
•
Both ends permanently attach to chassis and board
•
Secure mounting end design allows for taller spacing
L
.150 [3.8]
FOR .062 [1.57]
THICK PCB
FOR .100 [2.6] DIA.
MOUNTING HOLE
.150 [3.8]
FOR .062 [1.57]
THICK CHASSIS
FOR .100 [2.6] DIA.
MOUNTING HOLE
.171
[4.4]
L
I.D.
O.D.
.125 [3.2]
FOR .062 [1.57]
THICK PCB
•
Spacers can be stacked for multiple level
PC board applications
• Self-aligning
•
Base has larger surface area. Will not deform
under heavy pre-load.
L
.400 [10.2]
.312
[7.9]*
FOR NO. 6 [M3.5]
SELF-TAPPING SCREW
FOR .156 [4.0] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
.312 [7.9]
HEX.
8-32 THREAD .250
[6.4]
L
INSULATED PC SPACERS/SUPPORTS
TENSION-FIT EASY LOCK-IN
•
One end permanently attaches to chassis
•
Other end secures board with tension fit.
• Board easily releasable for repairs or upgrades
•
Both ends permanently attach to chassis and board
•
Teardrop style mounting end eases assembly
•
Low protrusion above board and under chassis
•
One end attaches to
chassis with screw or
tapped hole
•
Other end snap locks onto
.062 (1.6) board
•
Board is releasable for easy
repair or upgrades
CAT. L
NO. LENGTH
8879 .125 (3.2)
8880 .187 (4.7)
8881 .250 (6.4)
8882 .375 (9.5)
8883 .500 (12.7)
8884 .625 (15.9)
8885 .750 (19.1)
8886 .875 (22.2)
8887 1.000 (25.4)
CAT. L
NO. LENGTH
8888 .125 (3.2)
8889 .187 (4.7)
8890 .250 (6.4)
8891 .375 (9.5)
8892 .500 (12.7)
8893 .625 (15.9)
CAT. L
NO. LENGTH
9018 .125 (3.2)
9019 .187 (4.7)
9020 .250 (6.4)
9021 .375 (9.5)
9022 .500 (12.7)
9023 .625 (15.9)
9024 .750 (19.1)
9025 .875 (22.2)
9026 1.000 (25.4)
LOCK-IN THREADED
One end locks into panel. Clear hole designs for #4, #6 or #8 screw.One end locks into panel. Clear hole designs for #4, #6 or #8 screw.
SELF-ALIGNING
C'BORE
.125 [3.2]
L
FOR .062 [1.57]
THICK PCB
O.D.
I.D.
FOR .125 [3.2] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK CHASSIS
.140 [3.6]
FOR .125 [3.2] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
.150 [3.8]
L
.180
[4.6]
L
.140 [3.6]
FOR .062 [1.57]
THICK PCB
FOR .125 [3.2] DIA.
MOUNTING HOLE
.140 [3.6]
FOR .062 [1.57]
THICK CHASSIS
FOR .125 [3.2] DIA.
MOUNTING HOLE
.180
[4.6]
CAT. LOutside Inside Mounting Screw
NO. LENGTH Diameter Diameter Hole Size
9027 .125 (3.2)
9028 .187 (4.7)
9029 .250 (6.4) .260 .125 .187 #4
9030 .375 (9.5) (6.6) (3.2) (4.7)
9031 .500 (12.7)
9032 .625 (15.9)
9033 .250 (6.4)
9034 .375 (9.5) .281 .153 .234 #6
9035 .500 (12.7) (7.1) (3.9) (5.9)
9036 .625 (15.9)
9037 .250 (6.4)
9038 .375 (9.5) .281 .169 .234 #8
9039 .500 (12.7) (7.1) (4.3) (5.9)
9040 .625 (15.9)
MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0
MATERIAL: Nylon 6/6, UL Rated 94V-0MATERIAL: Nylon 6/6, UL Rated 94V-0
MATERIAL: Nylon 6/6,
UL Rated 94V-0
MATERIAL: Nylon 6/6,
UL Rated 94V-0
.125 (3.2) .100 (2.6)
.100 (2.6)
.125 (3.2)
.125 (3.2)
.125 (3.2)
.156 (4.0)
THREAD
MALE LFEMALE
CAT. NO. LENGTH CAT. NO.
9048 .250 (6.4) 9041
9049 .375 (9.5) 9042
9050 .500 (12.7) 9043
9051 .625 (15.9) 9044
9052 .750 (19.1) 9045
9053 .875 (22.2) 9046
9054 1.000 (25.4) 9047
CAT. L
NO. LENGTH
8822 .187 (4.7)
8823 .250 (6.4)
8824 .375 (9.5)
8825 .500 (12.7)
8826 .625 (15.9)
8827 .750 (19.1)
8828 .875 (22.2)
CAT. L
NO. LENGTH
9055 .125 (3.2)
9056 .187 (4.7)
9057 .250 (6.4)
9058 .375 (9.5)
9059 .500 (12.7)
9060 .625 (15.9)
INSULATED PC SPACERS/SUPPORTS
78
• Board will be electrically insulated, eliminates need for insulating washers
•No tool required for installation •Easy snap-in assembly
REVERSE CHASSIS MOUNT SUPPORTS
•
One end attaches to chassis with self adhesive pads
•
No drilling to chassis required leaving outside in perfect condition
•
Other end snap into .062 (1.57) board
•Board is easily releasable for repair or upgrade
FOR .156 [4.0] DIA
MOUNTING HOLE
FOR .062 [1.57]
THICK PCB
.400 [10.2]
.700 [17.8]
SQUARE ADHESIVE TAPE
.109
[2.8]
.280 [7.1]
L
•
One end permanently attaches to .062 (1.57) chassis
•
Accommodates varying board thicknesses
•
Sturdy support due to large contact area
.280
[
7.1
]
L.562 [14.3]
FOR .187 [4.8] DIA.
MOUNTING HOLE
FOR .062 [1.57]
CHASSIS
.218 [5.6]
FOR .062 [1.57]
THICK PCB
L
ADHESIVE TAPE WITH TAB
FOR .125 [3.2] DIA
MOUNTING HOLE
.109 [2.8]
.344 [8.8]
.500 [12.7]
SQUARE
.172 [4.4]
•
One end permanently attaches to .062 (1.57) chassis
•
Low protrusion under chassis
•
Small diameter frees up space on PC board
ADHESIVE LOCK-IN RELEASE SUPPORTS
.070
[1.8]
.500 [12.7]
FOR .062 [1.57]
THICK PCB
.203 [5.2]
L
.400 [10.2]
FOR .213 [5.4] DIA.
MOUNTING HOLE
FOR .156 [4.0] DIA.
MOUNTING HOLE
•
End locks onto .062 (1.57) PC board
•
Board is positively locked until manually released
•
Board is easily releasable for repairs or upgrades
•
End permanently attaches to .062 (1.57) PC board
• Small footprint frees up PC board space
FOR .100 [2.6] DIA.
MOUNTING HOLE
FOR .062 [1.57]
THICK CHASSIS
.171
[
4.4
]
.150 [3.8]
L
INSULATED PC SPACERS/SUPPORTS
ADHESIVE MOUNT ADHESIVE MOUNT SLIMLINE
STURDY SUPPORT SLIMLINE SUPPORT
•
Permanently attaches to .059 (1.51) - .065 (1.65) thick case from outside
•
Provides flat clean cosmetic appearance
•
Ideal for low clearance applications or for mounting directly to case walls
LOCK-IN RELEASE SLIMLINE LOCK-IN
FOR .187 [4.8] DIA.
MOUNTING HOLE
.187 [4.8]
L
.171
[4.4]
.375 [9.5]
.060
[1.5]
FOR .062 [1.57]
THICK PCB
FOR .125 [3.2] DIA.
MOUNTING HOLE
CAT. L
NO. LENGTH
9080 .187 (4.7)
9081 .250 (6.4)
9082 .375 (9.5)
9083 .500 (12.7)
9084 .625 (15.9)
PC SPACER SUPPORTS
•
One end locks into chassis
•
Other end supports the PC Board
•
Ideal for mid supports of large boards
•
Simplifies assembly for multiple support applications
•
Reduces the amount of holes required in PC board
CAT. L
NO. LENGTH
9061 .250 (6.4)
9062 .375 (9.5)
9063 .500 (12.7)
9064 .625 (15.9)
CAT. L
NO. LENGTH
9065 .250 (6.4)
9066 .375 (9.5)
9067 .500 (12.7)
9068 .625 (15.9)
Material: Nylon 6/6, UL Rated 94V-0 Material: Nylon 6/6, UL Rated 94V-0
Material: Nylon 6/6, UL Rated 94V-0Material: Nylon 6/6, UL Rated 94V-0
Material: Nylon 6/6, UL Rated 94V-0Material: Nylon 6/6, UL Rated 94V-0
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
.156 (4.0) .125 (3.2)
.156 (4.0)
.213 (5.4)
.125 (3.2)
.187 (4.8)
.187 (4.8) .100 (2.8)
CAT. L
NO. LENGTH
9070 .187 (4.7)
9071 .250 (6.4)
9072 .375 (9.5)
9073 .500 (12.7)
9074 .625 (15.9)
SPACERS/STANDOFF ORGANIZER KITS
SPACERS/STANDOFF KITS
79
ENGINEERING DESIGN KITSSPACER ASSORTMENT KITS
Maintain a neat complete inventory of the most frequently used spacers
and standoffs in day-to-day operations. Choice of 14 different kits of the
most popular spacers and standoffs. An assortment of various sizes and
styles in Brass, Aluminum and Nylon with tapped or thru hole. Supplied with
clear draw cabinet labeled for easy identification.
Kits combine the most frequently used spacers or standoffs for stacking
and a multi-stacking prototyping.
Assortment of 400 total standoffs: Female-Female standoffs
and Male–Female standoffs both Aluminum and Nylon, with
lengths of .250, .500, .750 and 1.000.
25 pieces of each size. Complete with cabinet and
25 machine screws with matching thread.
Brass kit is an assortment of 750 pieces of .500, .750, 1.000,
and 1.500 long standoffs with 4-40, 6-32 and 8-32 thread.
Complete with cabinet.
Stainless kit is an assortment of 250 pieces of .250, .500,
.750, and 1.000 long standoffs with 4-40, 6-32 and
8-32 thread.
Complete with cabinet and
25 pieces of each screw size.
Assortment of 1500 pieces in .250, .375, .500, .750 and 1.000
lengths, with clearance holes for #4, #6 and #8.
100 pieces of each size. Complete with cabinet.
Assortment of 400 total spacers: Brass, Aluminum, Nylon,
Rolled Aluminum, with lengths of .250, .500, .750 and 1.000.
25 pieces of each size. Complete with cabinet.
CAT.
NO. KIT SUPPLIED WITH
STR-15 Round Brass Zinc Plated Standoffs
STR-35 Round Aluminum Standoffs with Iridite Finish
STH-14 Hex Brass Zinc Plated Standoffs
STH-22 Hex Aluminum Standoff with Iridite Finish
CAT.
NO. KIT SUPPLIED WITH
SPR-13 Brass Nickel Plated Spacers
SPR-34 Aluminum Spacers with Iridite Finish
SPR-8 Nylon 6/6 Spacers
CAT.
NO. KIT SUPPLIED WITH
SCR-4 #4 Clear Hole Spacers
SCR-6 #6 Clear Hole Spacers
SCR-8 #8 Clear Hole Spacers
CAT.
NO. KIT SUPPLIED WITH
STR-440 4-40 Threaded Standoffs
STR-632 6-32 Threaded Standoffs
STR-832 8-32 Threaded Standoffs
Assortment of 425 total pieces. Female-Female standoffs and
Male-Female standoffs both aluminum and nylon, with lengths
of 10mm, 12mm, 15mm and 20mm.
25 pieces of each size. Complete with cabinet and
25 machine screws with matching threads.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CLEAR HOLE SPACER KITS
THREADED STANDOFF KITS
METRIC STANDOFF KITSHEX STANDOFF KITS
FEMALE-FEMALE STANDOFF KITS MALE-FEMALE STANDOFF KITS
CIRCUIT BOARD SPACER/SUPPORT ENGINEERING DESIGN KITS
SELF-RETAINING SPACER ENGINEERING DESIGN KIT
Assortment of 1500 pieces in .250, .375, .500, .750 and 1.000
lengths, with thread sizes of 4-40, 6-32, and 8-32.
100 pieces of each size. Complete with cabinet.
CAT.
NO. KIT SUPPLIED WITH
STR-M3 M3 Threaded Standoffs
STR-M4 M4 Threaded Standoffs
CAT.
NO. KIT SUPPLIED WITH
STH-19 Brass-Nickel Plate Standoffs
STH-20 Stainless Steel Standoffs
Assortment of 400 total pieces per kit of Self Retaining Round
Nylon Spacers. Lengths of .125, .250, .500 and .750
25 pieces of each size/style.
Complete with cabinet.
CAT.
NO. KIT SUPPLIED WITH
CBH-1 SlimLine Products – Tension Fit; Lock-In,
Easy Lock and Single Sided
CBH-2 Lock-In Products - Tension Fit; Lock-In,
Easy Lock and Single Sided
CBH-3 Stacking Products – Thru-Hole and Self Aligning
Assortment of 400 total pieces per kit of a variety of Circuit
Board Hardware in .125, .250, .375 and .500 lengths in
Nylon 6/6 material.
25 pieces of each size/style.
Complete with cabinet.
CAT.
NO. KIT SUPPLIED WITH
SCR-10 #4, #6, #8 & #10 Spacers
PANEL HARDWARE
Our diverse selection of panel hardware is second to none in the
marketplace. Our Handles, Screws, Knobs, Fan Guards and LED lens
and mounting spacers provides the right solution for a variety of
applications, including:
•Rack Mounted Equipment
•Carrying Cases
•Low Friction Assemblies
•“D” Subminiature connector Hardware
•Instrumentation Panels and Gauges
•Environments where mounting hardware is
subject to loss
•For protection from damage or debris
•To dress up chassis access panels, racks
or controls
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application.
PANEL HARDWARE
81
FAN FILTERS & GUARDS . . . . . . . . . .88-89
HANDLES
Contempory . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Ferrules / Screws . . . . . . . . . . . . . . . . . . . . . . . .87
Instrumentation . . . . . . . . . . . . . . . . . . .86-87
KNOBS (INSTRUMENTATION) . . . . . . . . . .85
LED HARDWARE
Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Lens and Caps . . . . . . . . . . . . . . . . . . . . . . . . . .90
Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
INSTRUMENT CASES . . . . . . . . . . . . . . . . . . .85
SCREWS
Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . .82
Jack Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Captive Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Shoulder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
MISCELLANEOUS HARDWARE
Panel Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Panel Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Shaft Coupling . . . . . . . . . . . . . . . . . . . . . . . . . .84
Shaft Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Volume Control Extender . . . . . . . . . . . . . . . .84
SECTION CONTENTS
COMPUTER HARDWARE
82
TURNABLE JACK SCREWS
SPECIFICATIONS: YELLOW: Steel, Zinc Plate and Yellow Chromate; CLEAR: Steel, Zinc Plate and Clear Chromate; STAINLESS: Stainless Steel
MATERIAL: Steel, Nickel Plate
DIRECT ACCESS
.187 [4.8]
L
.187 [4.8]
LOCKWASHER
FLAT WASHER
4-40 THREAD
SEMS JACK
SCREW
4-40 THREAD
.100 [2.6] MIN. DEEP
NUT
L
.187 [4.8]
4-40 THREAD
.100 [2.6] MIN. DEEP
NUT
JACK SCREW
(2) FLAT
WASHERS
LOCKWASHER
4-40 THREAD
.187 [4.8]
L
.187 [4.8]
4-40 THREAD
.100 [2.6] MIN. DEEP
NUT
JACK SCREW
(2) FLAT
WASHERS
LOCKWASHER
4-40 THREAD
.187 [4.8]
SCREWDRIVER
SLOT
STRAIGHT KNURL SLIM LINE
MATERIAL: Steel, Black Oxide
MATERIAL: Steel, Zinc Plate & Clear Chromate
WITHOUT SLOT WITH SLOT
CAT. NO. CAT. NO.
2072 2073
.140
[3.6]
.078 [1.98] DIA.
KNURL
.375 [9.5]
1.800 [45.7] .410 [10.4]
.187 [4.8] DIA.
4-40
THREAD
WITHOUT SLOT WITH SLOT TL
CAT. NO. CAT. NO. DIM. DIM.
2064 2065 .125 (3.2) .250 (6.4)
2066 2067 .250 (6.4) .437 (11.1)
WITHOUT SLOT WITH SLOT H
CAT. NO. CAT. NO. DIM.
2068 2069 1.250 (31.8)
2070 2071 1.750 (44.5)
YELLOW CLEAR LYELLOW CLEAR
CAT. NO. CAT. NO LENGTH CAT. NO. CAT. NO.
7270 7275 .250 (6.3) 7290 7295
7271 7276 .312 (7.9) 7291 7296
7272 7277 .375 (9.5) 7292 7297
7273 7278 .500 (12.7) 7293 7298
7274 7279 .625 (15.8) 7294 7299
JACK WITH HARDWARE*
JACK ONLY
L
.187 [4.8]
.187 [4.8]
4-40 THREAD
.100 [2.6] MIN. DEEP
NYLON PATCH
L
T
.375 [9.5]
.078 [1.98] DIA.
KNURL
2.000 [50.8]
.187 [4.8] DIA.
4-40
THREAD
JACK SCREWS
JACK WITH NYLON PATCH
YELLOW CLEAR STAINLESS L
CAT. NO. CAT. NO. CAT. NO. LENGTH
7260 7261 7262 .250 (6.4)
7263 7264 7265 .312 (7.9)
7266 7267 7268 .375 (9.5)
STANDARD JACK SCREWS SEMS JACK SCREWS
JACK SCREWS WITH NYLON PATCHSLOTTED JACK SCREWS
YELLOW CLEAR STAINLESS LYELLOW CLEAR STAINLESS
CAT. NO. CAT. NO. CAT. NO. LENGTH CAT. NO. CAT. NO. CAT. NO.
7228 7228-5 7248 .250 (6.4) 7229 7229-5 7249
7230 7230-5 7250 .312 (7.9) 7231 7231-5 7251
7241 7241-5 7252 .375 (9.5) 7242 7242-5 7253
7243 7243-5 7254 .500 (12.7) 7244 7244-5 7255
7232 7232-5 7256 .625 (15.8) 7233 7233-5 7257
JACK WITH HARDWARE*JACK ONLY
MATERIAL:
Clip & Screw: Steel, Zinc Plate
& Yellow Chromate
“U” CLIP
MATERIAL:
Clip & Screw: Steel, Zinc Plate
& Yellow Chromate
4-40 THREAD
.012 [0.30]
.265 [6.8]
.280 [7.1]
.250 [6.4]
Supplied Unassembled
MATERIAL:
Clip & Screw: Steel, Zinc Plate
& Yellow Chromate
.203 [5.2]
CLEARANCE
HOLE
4-40 THREAD
.365 [9.3]
.068 [1.73]
.437 [11.1]
Supplied Unassembled
SADDLE WASHER
CAT. NO. 2062 CAT. NO. 2063
“BOW TIE” RETAINING CLIP
CAT. NO. L
2060 .250 (6.4)
2061 .281 (7.1)
.187 [4.8]
.550 [14.0]
L
.200 [5.1]
MAX.
4-40 THREAD
Supplied Unassembled
H
.218
[5.6]
4-40
THREAD
KNURL
.625 [15.9]
.516 [13.1]
.093 [2.36] DIA.
.156 [4.0] DIA. .125 [3.2] DIA.
.235 [6.0]
PANEL MOUNTING HARDWARE
•Captivated helical spring lockwasher, simplifies use
• Nylon patch holds jack
firmly in vibration
applications.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
• Slot provides ability
to install jack with
a screwdriver.
*Hardware supplied unassembled in bulk
*Hardware supplied unassembled in bulk *Hardware supplied unassembled in bulk
•Equivalent to AMP, CANNON & TRW Jack Screws •“D” subminiature connector mounting screw •Custom lengths available •Hardware supplied unassembled and in bulk
SEMS JACK ONLY SEMS JACK WITH HARDWARE*
CLEAR LCLEAR
CAT. NO. LENGTH CAT. NO.
7235 .285 (7.3) 7236
7237 .347 (8.8) 7238
7239 .660 (16.8) 7240
CAPTIVE PANEL SCREWS
MATERIAL:Stainless Steel per ASTM-A581/A-582
4-40 6-32 8-32
CAT. NO. LENGTH
2415 .531 (13.5)
2416 .593 (15.1)
2417 .656 (16.7)
STAINLESS BRASS NYLON
THUMB SCREWS
CAT. NO. LENGTH THREAD DIA
2400 .312 (7.9)
2401 .375 (9.5) 4-40 .312 (7.9)
2402 .437 (11.1)
2403 .500 (12.7)
2404 .312 (7.9)
2405 .375 (9.5) 6-32 .312 (7.9)
2406 .437 (11.1)
2407 .500 (12.7)
2408 .375 (9.5)
2409 .437 (11.1) 8-32 .375 (9.5)
2410 .500 (12.7)
TH'D
W
82°
.281 [7.2]
S.D.
S.L.
.187 [4.8]
.062 [1.57]
.312 [7.9]
DIA.
STRAIGHT
KNURL
TH'D
S.D.
T.L.
P.L.
90°
P.D.
.046 [1.2] .312 [7.9]
.078 [1.98]
S.L.
STRAIGHT
KNURL
.312 [7.9]
DIA.
LENGTH
.125 [3.2]
.078 [2.0]
DIA.
.046 [1.17]
.187
[4.8]
.250 [6.4]
DIA.
4-40
THREAD
.046 [1.17]
.095 [2.4]
DIA.
.125 [3.2]
.281 [7.2]
DIA.
.046 [1.17]
.218
[5.6]
6-32
THREAD
.046 [1.17]
LENGTH .156 [4.0]
.120 [3.1]
DIA.
.312 [7.9]
DIA.
.062 [1.57]
.250
[6.4]
8-32
THREAD
.062 [1.6]
LENGTH
THREAD
DIA.
A
LENGTH
H
THREAD LENGTH
DIA.
.187 [4.8]
CAT. NO. LENGTH
2413 .469 (11.9)
2414 .531 (13.4)
CAT. T.L. S.D. S.L. P.D. P.L.
NO. THREAD ±.015 (.38) ±.005 (.13) ± .010 (.25) +000. -.016 (-.40) ± .015 (.38)
8706 4-40 .125 (3.2) .078 (2.0) .171 (4.3) .078 (2.0) .078 (2.0)
8707 4-40 .125 (3.2) .078 (2.0) .296 (7.5) .078 (2.0) .078 (2.0)
8708 4-40 .125 (3.2) .078 (2.0) .421 (10.7) .078 (2.0) .078 (2.0)
8709 6-32 .218 (5.5) .095 (2.41) .187 (4.7) .095 (2.41) .093 (2.36)
8710 6-32 .218 (5.5) .095 (2.41) .312 (7.9) .095 (2.41) .093 (2.36)
8711 6-32 .218 (5.5) .095 (2.41) .437 (11.1) .095 (2.41) .093 (2.36)
CAT. NO. LENGTH
2418 .656 (16.7)
2419 .718 (18.2)
2420 .781 (19.8)
CAT. S.D. S.L. W
NO. THREAD ± .005 (.13) ± .010 (.25) + .015 (+.38)-.000
8700 4-40 .078 (2.0) .375 (9.5) .036 (.091)
8701 4-40 .078 (2.0) .500 (12.7) .036 (.091)
8702 4-40 .078 (2.0) .625 (15.9) .036 (.091)
8703 6-32 .095 (2.41) .375 (9.5) .045 (1.14)
8704 6-32 .095 (2.41) .500 (12.7) .045 (1.14)
8705 6-32 .095 (2.41) .625 (15.9) .045 (1.14)
PANEL SCREWS
83
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. THREAD
1708 6-32
1709 8-32
1710 10-32
MATERIAL: Brass,
Nickel Plate
MATERIAL: Stainless Steel
MATERIAL: Nylon 6/6, UL Rated 94V-2
THREAD
.437 [11.1]
DIA.
.781 [19.9]
.125 [3.2]
.250 [6.4]
CAT. NO. LENGTH THREAD DIA. H A
2500 .250 (6.4)
2501 .375 (9.5) 4-40 .300 (7.6) .280 (7.1) .125 (3.2)
2502 .500 (12.7)
2503 .250 (6.4)
2504 .375 (9.5) 6-32 .360 (9.1) .275 (7.0) .125 (3.2)
2505 .500 (12.7)
2506 .250 (6.4)
2507 .375 (9.5) 8-32 .425 (10.8) .305 (7.7) .140 (3.6)
2508 .500 (12.7)
CAT. NO. FOR THREAD DIAMETER THICKNESS
1448 Mounting 1/4 -32 .375 Hex .093 (2.38)
1449 Mini. Control 1/4 -32 .312 Hex .078 (1.98)
1456 Vol. Control 3/8 -32 .500 Hex .093 (2.38)
1458 Switch 15/32 -32 .562 Hex .078 (1.98)
1459 Switch Ring 15/32-32 .625 Knurled .062 (1.57)
1472 Filter 15/16 -32 .375 Hex .093 (2.38)
PANEL HARDWARE
84
SHAFT LOCKS
For .250 (6.4) volume control shafts having
.375-32 threaded bushings.
MATERIAL: Brass, Nickel Plate MATERIAL: Brass, Nickel Plate
CAT. NO. 1701 CAT. NO. 1702
For .250 (6.4) SHAFT For .250 (6.4) SHAFT
CAT. NO. A B (HEX) C D E THREAD
1705 .253 (6.5) .437 (11.1) .500 (12.7) .437 (11.1) .375–32 Standard
1706 .128 (3.3) .343 (8.7) .437 (11.1) .375 (9.5) .250–32 Miniature
.250 (6.4) SHAFT COUPLING
VOLUME CONTROL EXTENDERS
MATERIAL: Brass, Nickel Plate
Set Screws: Steel, Zinc Plate
Supplied unassembled
CAT. NO. 1453
MATERIAL: Brass, Nickel Plate
Supplied unassembled
MATERIAL: Brass,Nickel Plate
STANDARD and MINIATURE
.437 [11.1]
HEX LOCKNUT
.375-32 THREAD
FOR .250 [6.4]
DIA. SHAFT
.375-32
THREAD
.218
[5.6]
.500
[12.7]
.500 [12.7]
HEX SHAFT
.375-32 THREAD
.500 [12.7]
HEX
1.00 [25.4]
DIA. KNURL
LOCKNUT .500
[12.7]
.187
[4.8]
FOR .250 [6.4]
DIA. SHAFT
.375-32
THREAD
PANEL BEARINGS
PANEL NUTS
.750 [19.1]
.500 [12.7]
DIA.
.253 [6.5]
DIA.
.437 [11.1]
.156 [4.0] 6-32 SET
SCREW
BA
.375-32 THREAD
.500 [12.7]
.253 [6.5]
DIA.
D
C
A
B HEX.
NUT
E TH'D
CAT. NO. AB
1464 .625 (15.9) .250 (6.4)
1465 .625 (15.9) .375 (9.5)
1466 .687 (17.4) .500 (12.7)
1467 .750 (19.1) .250 (6.4) MATERIAL: Brass, Nickel Plate
For Volume Controls, Switches, Tip Jacks, etc.
•Two set screws hold
shaft securely
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
4-40 6-32 8-32
PRECISION GROUND SHOULDER SCREWS
SLOTTED SOCKET
CAT. NO. LENGTH CAT. NO.
2421 .125 (3.2) 2441
2422 .250 (6.4) 2442
2423 .375 (9.5) 2443
2424 .500 (12.7) 2444
SLOTTED SOCKET
CAT. NO. LENGTH CAT. NO.
2425 .125 (3.2) 2445
2426 .250 (6.4) 2446
2427 .375 (9.5) 2447
2428 .500 (12.7) 2448
SLOTTED SOCKET
CAT. NO. LENGTH CAT. NO.
2431 .125 (3.2) 2451
2432 .250 (6.4) 2452
2433 .375 (9.5) 2453
2434 .500 (12.7) 2454
2435 .625 (15.9) 2455
L
.375 [9.5]
DIA.
.156 [4.0] .187
[4.8]
8-32
THREAD
.032 [0.81] x
.005 [0.13] DEEP
.187 [4.8]
DIA.
L
.125 [3.2] .156
[4.0]
.250 [6.4]
DIA.
4-40
THREAD
.032 [0.81] x
.005 [0.13] DEEP
.124 [3.2]
DIA.
L
.281 [7.1]
DIA.
.125 [3.2] .187
[4.8]
6-32
THREAD
.032 [0.81] x
.005 [0.13] DEEP
.156 [4.0]
DIA.
Shoulder ground to +.000/-.001 Dia, +.002 /-.000 Length. Material: Stainless Steel, ASTM A581/A582
PHENOLIC INSTRUMENT CASES
•Aluminum or Phenolic
Panels Available
•Choice of Sizes •Sturdy construction •Flush mounting panels
MATERIALS:
Phenolic Cases: .125 (3.2) Wall thickness,
Molded Glossy Black Phenolic, MIL-M-14, CFG
INSTRUMENTATION CASES & KNOBS
PHENOLIC CASE
THREAD
CAT. NO. A B C SIZE AND TYPE
715 2.500 (63.5) 3.500 (88.9) 1.250 (31.8) 4-40 TAPPED
703 2.875 (73.0) 4.000 (101.6) 1.562 (39.7) 4-40 TAPPED
705 2.875 (73.0) 4.000 (101.6) 1.562 (39.7) USE #4 SELF TAPPING SCREW
704 3.125 (79.4) 5.875 (149.2) 2.250 (57.2) 4-40 TAPPED
700 3.750 (95.3) 6.250 (158.8) 2.000 (50.8) 6-32 BRASS INSERT
716 4.250 (108.0) 5.000 (127.0) 1.750 (44.5) 6-32 BRASS INSERT
701 5.250 (133.4) 6.812 (173.0) 2.312 (58.7) 6-32 BRASS INSERT
702 7.375 (187.3) 8.375 (212.7) 3.000 (76.2) 6-32 BRASS INSERT
*.093 (2.36)
COVER PANEL
PHENOLIC ALUMINUM
PANEL PANEL
CAT. NO. CAT. NO.
2050 2051
2042 2044
2042 2044
2043 2045
2037* 2046
2052* 2053
2038* 2047
2039* 2048
A
B
C
MATERIALS:
Phenolic Panels: .062 (1.57) Glossy Black
Phenolic, MIL-P3115C
Aluminum Panels: .062 (1.57), 5052-H34
per QQ 318 C; Bright finished surface with
pressure sensitive protective covering tape
•Cases and panels are sold separately
•Covers available in Phenolic or Aluminum
•Covers can be machined to accept dials,
switches, displays
•Panel mounting screws available -
Refer to page 133
•Sturdy case can be machined for wiring access
•Ideal for prototype or lab use
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®85
INSTRUMENTATION KNOBS
SHAFT
ATTACHMENT DETAILS NUT CLEARANCE
CAT. SHAFT D H M L B I.D. C (C’BORE
NO. (DIA.) (DIA.) (HEIGHT) (MAX.) (LOCATION) (DEPTH) (DIA.) DEPTH)
8554 .125 (3.2) .500 (12.7) .660 (16.8) —.320 (8.1) .570 (14.5) .360 (9.1) .170 (4.3)
8555 .250 (6.4) .700 (17.8) .780 (19.8) —.360 (9.1) .680 (17.3) .500 (12.7) .180 (4.6)
8556 .250 (6.4) .920 (23.4) 1.010 (25.7) —.460 (11.7) .910 (23.1) .640 (16.3) .330 (8.4)
8557 .250 (6.4) 1.250 (31.8) .828 (21.0) —.400 (10.2) .700 (17.8) 1.010 (25.7) .250 (6.4)
8558 .125 (3.2) .500 (12.7) .660 (16.8) .915 (23.4) .320 (8.1) .570 (14.5) .360 (9.1) .170 (4.3)
8559 .250 (6.4) .700 (17.8) .780 (19.8) 1.150 (29.2) .357 (9.1) .660 (16.7) .480 (12.2) .180 (4.6)
8560 .250 (6.4) .920 (23.4) 1.010 (25.7) 1.520 (38.6) .500 (12.7) .910 (23.1) .640 (16.3) .240 (6.1)
8561 .250 (6.4) 1.250 (31.8) .920 (23.4) 1.860 (47.2) .470 (11.9) .800 (20.3) .780 (19.8) .350 (8.9)
8567 .125 (3.2) .500 (12.7) .500 (12.7) .610 (15.5) .160 (4.0) .405 (10.3) .410 (10.4) .030 (0.8)
8568 .250 (6.4) .700 (17.8) .625 (15.9) .820 (20.8) .210 (5.3) .480 (12.2) .468 (11.9) .030 (0.8)
8569 .250 (6.4) .920 (23.4) .780 (19.8) 1.090 (27.7) .240 (6.1) .660 (16.8) .640 (16.3) .100 (2.5)
8565 .250 (6.4) 700 (17.8) .630 (16.0) 1.187 (30.2) .210 (5.3) .510 (13.0) .570 (14.5) .030 (0.8)
8566 .250 (6.4) .920 (23.4) .640 (16.3) 1.510 (38.6) .260 (6.6) .540 (13.7) .730 (18.5) .120 (3.1)
LB
I.D.
D
C
H
SPECIFICATIONS
Knob: ABS
Inlay: Spun Aluminum
Insert: Brass, Nickel Plate
•All knobs supplied with two set screws installed
L B
I.D.
D
M
C
H
L B
I.D.
D
M
C
H
L B
I.D.
D
M
C
H
CUSTOM HANDLES
Keystone is fully integrated to meet your total design and production needs. Our specialty is manufacturing
custom designs and modifications of standard items. Forward your CAD drawing or print to our Engineering
Department for a quote on your specific production requirements or visit our “Part Builder” at www.keyelco.com
CARRYING HANDLES
HANDLES
86
OVAL INSTRUMENTATION HANDLES
MATERIAL:
Aluminum: QQ-A-200, Alloy 6061-T6, Black Anodized per MIL-A-8625
ALUMINUM A B D
CAT. NO. MTG. CTRS. HEIGHT DEPTH
7186 4.000 (101.6) 1.750 (44.5)
544 4.000 (101.6) 2.000 (50.8)
540 4.500 (114.3) 1.750 (44.5)
545 4.500 (114.3) 2.000 (50.8) .500 (12.7)
541 5.000 (127.0) 1.750 (44.5)
546 5.000 (127.0) 2.000 (50.8)
542 5.500 (139.7) 1.750 (44.5)
547 5.500 (139.7) 2.000 (50.8)
7187 6.000 (152.4) 1.375 (34.9) .375 (9.5)
543 6.000 (152.4) 1.750 (44.5)
548 6.000 (152.4) 2.000 (50.8) .500 (12.7)
7188 6.437 (163.5) 1.750 (44.5)
10-32
THREAD
.500 (12.7)
RADIUS
B
D
.625
[15.9]
.281
[7.2]
A
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. COLOR
8356 BLACK
This retractable handle is manufactured with black leather-like material and Nickel
Plated steel hardware. Handle folds flat when not in use. Mounts with #6 screws (not
supplied).
Folds flat on case when not in use. Mounts with rivets or #6 screws (not supplied).
CAT. NO. 7196
CAT. NO. LENGTH A
8351 4.500 (114.3) 6.000 (152.4)
8352 5.500 (139.7) 7.000 (177.8)
8353 6.000 (152.4) 7.500 (190.5)
.156 [4.0]
DIA. (4) PLS
1.375 [35.0] 1.375 [35.0]
5.687 [144.5]
1.850 [47.0]
REF.
2.562 [65.1]
REF. 4.968 [126.2]
3.562 [90.5]
4.000 [101.6]
.500 [12.7] MIN.
.593 [15.1]
1.062 [27.0]
.875 [22.3]
10-32 THREAD
(2) PLS
MATERIAL:Zinc, Satin Brushed, Nickel Plate
MATERIAL:
Grip: Polypropylene, Black
Post: Steel, Nickel Plate
Pin: Steel, Nickel Plate
LENGTH
A.250 [6.4]
(2) PLS
.562 [14.3]
.281 [7.2]
.156 [4.0] DIA. (6) PLS
87
FERRULESROUND INSTRUMENTATION HANDLES
FERRULES FOR ROUND HANDLES
THREAD
A
B
D
C
R
E
•To protect and support panel surface
INSTRUMENTATION HANDLES
HANDLE MOUNTING SCREWS
MATERIAL: Stainless Steel
•Phillips drive pan head machine screws
L
THREAD
BRASS ALUMINUM A B D E R C
CAT. NO. CAT. NO. MTG. CTRS. HEIGHT DEPTH THREAD RADIUS DIAMETER
7140 7170 1.250 (31.8) 1.000 (25.4)
7141 7171 2.000 (50.8) 1.000 (25.4) .375 (9.5) 4-40 .156 (4.0) .156 (4.0)
7142 7172 3.000 (76.2) 1.000 (25.4)
9100 9110 1.250 (31.8) .625 (15.9)
9101 9111 1.500 (38.1) .625 (15.9)
9104 9114 1.500 (38.1) .750 (19.1) .156 (4.0) 4-40 .187 (4.7) .187 (4.7)
9102 9112 1.750 (44.5) .625 (15.9)
9105 9115 1.750 (44.5) .750 (19.1)
9103 9113 2.000 (50.8) .625 (15.9)
9106 9116 1.250 (31.8) 1.000 (25.4)
9107 9117 1.500 (38.1) 1.000 (25.4) .250 (6.4) 6-32 .187 (4.7) .187 (4.7)
9108 9118 2.000 (50.8) 1.000 (25.4)
9109 9119 3.000 (76.2) 1.000 (25.4)
7143 7173 3.000 (76.2 ) 1.500 (38.1)
485 515 3.000 (76.2) 1.750 (44.5)
480 510 3.500 (88.9) 1.500 (38.1)
7144 7174 4.000 (101.6) 1.500 (38.1)
486 516 4.000 (101.6) 1.750 (44.5)
481 511 4.500 (114.3) 1.500 (38.1) .562 (14.3) 8-32 .250 (6.4) .250 (6.4)
487 517 4.500 (114.3) 1.750 (44.5)
482 512 5.000 (127.0) 1.500 (38.1)
488 518 5.000 (127.0) 1.750 (44.5)
483 513 5.500 (139.7) 1.500 (38.1)
484 514 6.000 (152.4) 1.500 (38.1)
489 519 6.000 (152.4) 1.750 (44.5)
7145 7175 3.000 (76.2) 1.500 (38.1)
7146 7176 4.000 (101.6) 1.500 (38.1)
493 523 4.000 (101.6) 1.750 (44.5)
490 520 4.500 (114.3) 1.500 (38.1)
494 524 4.500 (114.3) 1.750 (44.5)
7147 7177 4.562 (115.9) 1.500 (38.1) .562 (14.3) 10-32 .312 (7.9) .312 (7.9)
491 521 5.000 (127.0) 1.500 (38.1)
495 525 5.000 (127.0) 1.750 (44.5)
492 522 5.500 (139.7) 1.500 (38.1)
7148 7178 6.000 (152.4) 1.500 (38.1)
496 526 6.000 (152.4) 1.750 (44.5)
7149 7179 6.437 (163.5) 1.750 (44.5)
7150 7180 4.000 (101.6) 1.375 (34.9) .375 (9.5) 10-32 .375 (9.5) .375 (9.5)
7151 7181 6.000 (152.4) 1.375 (34.9)
BRASS ALUMINUM FOR FOR
CAT. NO. CAT. NO. THREAD DIAMETER O.D. I.D. T
7162 7192 4-40 .156 .250 .120 .125
(4.0) (6.4) (3.0) (3.2)
9120 9122 4-40 .187 .312 .120 .125
(4.7) (7.9) (3.0) (3.2)
9121 9123 6-32 .187 .312 .144 .125
(4.7) (7.9) (3.7) (3.2)
7163 7193 8-32 .250 .375 .170 .187
(6.4) (9.5) (4.3) (4.7)
7164 7194 10-32 .312 .562 .196 .250
(7.9) (14.3) (5.0) (6.4)
CAT. L DRIVER
NO. LENGTH THREAD SIZE
9900 .250 (6.4)
9901 .375 (9.5) 4-40 1
9902 .500 (12.7)
9903 .250 (6.4)
9904 .375 (9.5) 6-32 2
9905 .500 (12.7)
9906 .375 (9.5)
9907 .500 (12.7) 8-32 2
9908 .750 (19.1)
9909 .375 (9.5)
9910 .500 (12.7) 10-32 2
9911 .750 (19.1)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
O.D.
I.D.
T
MATERIAL:
Brass: ASTM-B16, Nickel Plate
Aluminum: QQ-A-200, Alloy 6061-T6,
Black Anodized per MIL-A-8625
MATERIAL:
Brass: ASTM-B16, Nickel Plate
Aluminum: QQ-A-200, Alloy 6061-T6, Black Anodized per MIL-A-8625
CHOICE of BRASS or ALUMINUM
PLASTIC FAN FILTER ASSEMBLY
88
FAN GUARD & FILTER ASSEMBLIES
FAN GUARDS
PLASTIC FAN FILTER ASSEMBLY
A unique package consisting of guard, filter media and retainer. The guard and retainer
are manufactured with UL Rated 94V-HB material. The filter media is made of polyester
foam and aluminum mesh which allows free passage of air (24 CFM) with minimum air
resistance and pressure drop. A major feature of this assembly is that when the filter
media requires maintenance you simply remove the snap-fit retainer to clean or replace
the filter, leaving the guard and fan in place. This assures protection to the fan blades and
eliminates damage to the fan or equipment during cleaning.
RETAINER
MATERIAL: Glass filled Nylon 6/6, UL Rated HB
•Snap-fit construction
•Designed for minimum air restriction
MEDIA
MATERIAL: White Polyester foam and Aluminum screen
• Constructed to allow free passage of air with mimimum resistance
and pressure drop (24 CFM)
• Has a high surface-area contact for impingement of dust particles
• Helps reduce external fan noise
• Easily cleaned by vacuuming or washing with mild soap, detergent
or cleaning solvent
• Replacement media available
GUARD
MATERIAL: Glass filled Nylon 6/6, UL Rated HB
•.250 (6.4) maximum ring spacing
•Decreased noise level
•Countersunk mounting holes (4)
•Withstands high impact
GUARD
MEDIA
FAN
(Customer
Supplied)
SNAP-FIT
MEDIA
RETAINER
.177 [4.5] DIA.
MTG. HOLES
.177 [4.5] DIA.
MTG. HOLES
HEIGHT
WIDTH
MTG.
CENTERS
HEIGHT
WIDTH
MTG.
CENTERS
FILTER
ASSEMBLY FIG. FOR HEIGHT/ MTG. MEDIA ONLY
CAT. NO. NO. FAN SIZE WIDTH THICKNESS CENTERS CAT. NO.
8443 1 1.50 (40mm) 1.839 (46.7) .327 (8.3) 1.260 (32.0) 8443-MO
8444 2 2.50 (60mm) 2.559 (65.0) .488 (12.4) 1.970 (50.0) 8444-MO
8487 2 3.12 (80mm) 3.408 (86.7) .488 (12.4) 2.840 (72.0) 8487-MO
8488 2 3.62 (92mm) 3.815 (96.9) .488 (12.4) 3.250 (82.5) 8488-MO
8489 2 4.50 (120mm) 4.961 (126.0) .496 (12.6) 4.130 (105.0) 8489-MO
.177 [4.5] DIA.
MTG. HOLES
.177 [4.5] DIA.
MTG. HOLES
MTG.
CENTERS
HEIGHT
WIDTH
HEIGHT
WIDTH
MTG.
CENTERS
MTG. HOLE
GUARD FIG. FOR HEIGHT/ CENTER
CAT. NO. NO. FAN SIZE WIDTH THICKNESS SPACING
8445 3 1.50 (40mm) 1.681 (42.7) .169 (4.3) 1.260 (32.0)
8446 4 2.50 (60mm) 2.378 (60.4) .236 (6.0) 1.970 (50.0)
8497 4 3.12 (80mm) 3.177 (80.7) .236 (6.0) 2.840 (72.0)
8498 4 3.62 (92mm) 3.634 (92.3) .236 (6.0) 3.250 (82.5)
8499 4 4.50 (120mm) 4.741 (120.4) .244 (6.2) 4.130 (105.0)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Fig. 1
Fig. 2
Fig. 3
Fig. 4
89
METAL GUARDS
FITS 1.50” (40mm) FANS
Made of high quality steel wire which combines strength with superior
forming. The units offer clean, strong butt welds with minimum flash and
have consistent guard diameters to enhance maximum air-flow and
venting.
•Available for most popular size fans
•Protects fingers as well as fan blades
•Same mounting hole pattern as standard fans
•Chrome Plate offers a high luster finish
.189
[4.8]
1.150 [29.2]
DIA.
1.260 [32.0]
SQUARE
.160 [4.1] DIA.
(4) PLS
2.087 [53.0] DIA.
1.970 [50.0]
SQUARE
.196
[5.0]
.180 [4.6] DIA.
(4) PLS
2.810
[
71.4
]
SQUARE
.195
[5.0]
.180 [4.6] DIA.
(4) PLS 3.000 [76.2] DIA.
3.540 [89.9] DIA.
.180 [4.6] DIA.
(4) PLS
.195
[5.0]
3.250 [82.6]
SQUARE
.180 [4.6] DIA.
(4) PLS
.217
[5.5]
4.125 [104.8]
SQUARE
4.380 [111.3] DIA.
.223
[5.7]
4.125 [104.8]
SQUARE
.192 [4.9] DIA.
(4) PLS 4.220 [107.2] DIA.
.217
[5.5]
.180 [4.6] DIA.
(4) PLS 4.551 [115.6] DIA.
4.125 [104.8]
SQUARE
6.380
[162.1]
.250
[6.4]
6.070 [154.2]
DIA. .200 [5.1] DIA.
(2) PLS
6.850 [174.0]
SQUARE
.250
[6.4]
.180 [4.6] DIA.
(4) PLS 8.750 [222.3] DIA.
FITS 2.50” (60mm) FANS FITS 3.12” (80mm) FANS
FITS 3.62” (92mm) FANS FITS 4.50” (120mm) FANS FITS 4.50” (120mm) FANS
FITS 4.50” (120mm) FANS FITS 6.00” (150mm) FANS FITS 10.00” (250mm) FANS
CAT. NO. 8447 CAT. NO. 8449 CAT. NO. 8450
CAT. NO. 8451 CAT. NO. 8448 CAT. NO. 8452
CAT. NO. 8453 CAT. NO. 8455 CAT. NO. 8457
CONSTRUCTION
Rings: .063 (1.60) wire diameter
Ribs: .063 (1.60) wire diameter
CONSTRUCTION
Rings: .063 (1.60) wire diameter
Ribs: .063 (1.60) wire diameter
CONSTRUCTION
Rings: .063 (1.60) wire diameter
Ribs: .063 (1.60) wire diameter
CONSTRUCTION
Rings: .063 (1.60) wire diameter
Ribs: .063 (1.60) wire diameter
CONSTRUCTION
Rings: .063 (1.60) wire diameter
Ribs: .063 (1.60) wire diameter
CONSTRUCTION
Rings: .071 (1.80) wire diameter
Ribs: .091 (2.31) wire diameter
CONSTRUCTION
Rings: .091 (2.31) wire diameter
Ribs: .091 (2.31) wire diameter
CONSTRUCTION
Rings: .071 (1.80) wire diameter
Ribs: .091 (2.31) wire diameter
CONSTRUCTION
Rings: .071 (1.80) wire diameter
Ribs: .071 (1.80) wire diameter
MATERIAL: Steel, Nickel Chrome Plate
FAN/FINGER GUARDS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
LED LENS CAPS & HOLDERS
90
ROUND CAPS
MATERIAL: Polycarbonate
Available in Red, Green, Yellow and Clear
MATERIAL: Nylon 6/6, Black
Designed for use with T-1 or T-1 3/4 LEDs, these Lens Caps are available in round
or square configurations. They snap-mount through the front panel for easy, light-finger pres-
sure, intsallation. The LED is inserted into the cap from behind the panel and held securely
in place.
The Lens Cap protects the LED from physical damage while guarding the components from
electrostatic discharge (ESD), up to 16KV. More economical than indicator light assemblies,
the caps feature striated lines and fresnel rings which permit up to 180 viewing angles with
either diffused or non-diffused LED’s. They provide exceptionally high contrast and visibility.
LED LENS CAPS
Note: When mounting T-1 3/4 Low Profile Caps (Fig. 4 or Fig. 7) in panels .125 (3.2) thick or less a spacer must be used. Spacer CAT. NO. 8692 MATERIAL: White Nylon .360 (9.1) O.D. 1/4 I.D. 1/8 Lg.
SQUARE CAPS
“SNAP-IN” T-1 & T-1 3/4 LED HOLDERS
FIG. 1 T-1 FIG. 2 T-1 3/4 FIG. 3 T-1 FIG. 4 T-1 3/4
FIG. 6 T-1 FIG. 7 T-1 3/4
Designed for use with T-1 or T-1 3/4 LED’s in .060 (1.52) - .070 (1.78) thick panels. The
holder snaps into the front panel with easy, light-finger pressure. The LED snaps into the
holder from behind the panel and is held securely in place.
.030
[0.76]
C
DIA.
DIA.
A
B
STANDARD HEIGHT LOW PROFILE
.250 [6.4] SQ.
.220
[5.6]
.430 [10.9]
.280 [7.1]
SQ. .290 [7.4]
.190
[4.9]
SQ. .060
[1.52]
.171 [4.4] DIA.
.280 [7.1]
SQ.
.430 [10.9]
.070
[1.78]
.250 [6.4] DIA.
.290 [7.4]
.190
[4.9]
DIA.
.150
[3.8]
.171 [4.4] DIA. .250 [6.4] DIA.
.220
[5.6]
.430 [10.9]
.280 [7.1]
DIA. .290 [7.4]
.190
[4.9]
DIA. .060
[1.52]
.171 [4.4] DIA. .250 [6.4] DIA.
.070
[1.78]
.430 [10.9]
.280 [7.1]
DIA.
CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8650 RED
8651 GREEN 1 T-1 .171 (4.3) .250 (6.4) .031 - .062 (.79/1.57)
8652 YELLOW
8653 CLEAR
8662 RED
8663 GREEN 2T-1
3/4 .250 (6.4) .375 (9.5) .062 - .125 (1.57/3.18)
8664 YELLOW
8665 CLEAR
CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8656 RED
8657 GREEN 3 T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18)
8658 YELLOW
8659 CLEAR
8668 RED
8669 GREEN 4 T-1 3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4)
8670 YELLOW
8671 CLEAR (See Note)
LOW PROFILE
CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8674 RED
8675 GREEN 6 T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18)
8676 YELLOW
8677 CLEAR
8686 RED
8687 GREEN 7T-1
3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4)
8688 YELLOW
8689 CLEAR (See Note)
STANDARD HEIGHT
CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8680 RED
8681 GREEN 5T-1 3/4
.250
.375 (9.5) .062 - .125 (1.57/3.18)
8682 YELLOW (6.4)
8683 CLEAR SQUARE
CAT. LED MTG. HOLE
NO. SIZE A B C SIZE
8309 T-1 .114 (2.9) .232 (5.9) .188 (4.8) .171 (4.3)
8310 T-1 3/4 .200 (5.0) .315 (8.0) .274 (6.9) .250 (6.4)
FIG. 5 T-1 3/4
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
“UNIVERSAL” FOR T- 1 & T-1 3/4
“SELF-ALIGNING” FOR BI-LEAD T- 1 & T-1 3/4
•Unique design separates leads and retains Tri-Lead
and Bi-Lead components.
•Designed for PC board mounting of Tri-Lead and
Bi-Lead T-1 and T-13/4 LEDS
•Provides height control, lead retention and stability.
•Also suitable for mounting lamps, resistors, transistors,
diodes, capacitors, etc.
MATERIAL: Black PVC, UL Rated 94V-0
•This features an internally tapered barrier which guides the leads and
eliminates crimping or shorting.
•The bottom bosses serve the dual purpose of heat dissipation and easy post
soldering cleanup.
FOR T-1 3/4 and T-1
CAT. LCAT. L
NO. LENGTH NO. LENGTH
8900 .120 (3.0) 8916 .400 (10.2)
8901 .140 (3.6) 8917 .420 (10.7)
8902 .160 (4.1) 8918 .440 (11.2)
8903 .180 (4.6) 8919 .450 (11.4)
8904 .200 (5.1) 8920 .460 (11.7)
8905 .220 (5.6) 8921 .480 (12.2)
8906 .240 (6.1) 8922 .500 (12.7)
8907 .250 (6.4) 8923 .550 (14.0)
8908 .260 (6.6) 8924 .600 (15.2)
8909 .280 (7.1) 8925 .650 (16.5)
8910 .300 (7.6) 8926 .700 (17.8)
8911 .320 (8.1) 8927 .750 (19.1)
8912 .340 (8.6) 8928 .800 (20.3)
8913 .350 (8.9) 8929 .850 (21.6)
8914 .360 (9.1) 8930 .900 (22.9)
8915 .380 (9.7) 8931 .925 (23.5)
T-1 3/4T-1 T-1 3/
4T-1
CAT. CAT. LA
NO. NO. LENGTH REF.
8311 7351 .120 (3.0)
8312 7352 .140 (3.6)
8313 7353 .160 (4.1) .075 (1.9)
8314 7354 .180 (4.6)
8315 7355 .200 (5.1)
8316 7356 .220 (5.6)
8317 7357 .240 (6.1)
8318 7358 .250 (6.4)
8319 7359 260 (6.6) .190 (4.8)
8320 7360 .280 (7.1)
8321 7361 .300 (7.6)
8322 7362 .320 (8.1)
8323 7363 .340 (8.6) .200 (5.1)
8324 7364 .350 (8.9)
8325 7365 .360 (9.1)
8326 7366 .380 (9.7).325 (8.3)
T-1 3/
4T-1
CAT. CAT. LA
NO. NO. LENGTH REF.
8327 7367 .400 (10.2)
8328 7368 .420 (10.7)
8329 7369 .440 (11.2) .325 (8.3)
8330 7370 .450 (11.4)
8331 7371 .460 (11.7)
8332 7372 .480 (12.2)
8333 7373 .500 (12.7)
8334 7374 .550 (14.0) .450 (11.4)
8335 7375 .600 (15.2)
8336 7376 .650 (16.5) .575 (14.6)
8337 7377 .700 (17.8)
8338 7378 .750 (19.1)
8339 7379 .800 (20.3)
8340 7380 .850 (21.6) .690 (17.5)
8341 7381 .900 (22.9)
8342 7382 .925 (23.5)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
KEY FEATURES
•Positive self-alignment of leads on .100 (.25) centers.
•No special tools required
MATERIAL: Natural Nylon, UL Rated 94V-2
“SELF-RETAINING” FOR T-1
.140 [3.6] DIA.
.200 [5.1]
DIA.
.040 [1.0]
DIA. BOSSES
(6) PLS
LEAD RETAINING
AND DRAINAGE
.100 [2.5]
.100 [2.5]
.020 [0.5]
L
A
.025 [0.62] DIA.
.040 [1.02]
x .065 [1.65]
SLOT (4) PLS
L
.255 [6.5]
DIA.
.208 [5.3]
TYP.
.093 [2.4]
.133 [3.4]
DIA.
.100 [2.5]
.045 [1.1]
DIA BOSSES
(6) PLS.
.032 [0.81]
SQUARE
[2] PLS
.197
[5.0]
DIA.
A
L
.020 [0.5]
.045 [1.1]
DIA BOSSES
(6) PLS.
.157 [4.0]
DIA.
.100 [2.5]
.020 [0.5]
.197
[5.0]
DIA.
A
L
.032 [0.81]
SQUARE
[2] PLS
T-1
CAT. LA
NO. LENGTH REF.
7046 .400 (10.2)
7047 .420 (10.7)
7048 .440 (11.2)
7049 .450 (11.4) .310 (7.9)
7050 .460 (11.7)
7051 .480 (12.2)
7052 .500 (12.7)
7053 .550 (14.0) .435 (11.0)
7054 .600 (15.2)
7055 .650 (16.5)
.650 (14.2)
7056 .700 (17.8)
7057 .750 (19.1)
7058 .800 (20.3)
7059 .850 (21.6) .690 (17.5)
7060 .900 (22.9)
7061 .925 (23.5)
T-1
CAT. LA
NO. LENGTH REF.
7030 .120 (3.0)
7031 .140 (3.6)
7032 .160 (4.1)
7033 .180 (4.6) .060 (1.5)
7034 .200 (5.1)
7035 .220 (5.6)
7036 .240 (6.1)
7037 .250 (6.4)
7038 .260 (6.6)
7039 .280 (7.1)
7040 .300 (7.6) .185 (4.7)
7041 .320 (8.1)
7042 .340 (8.6)
7043 .350 (8.9)
7044 .360 (9.1)
7045 .380 (9.7) .310 (7.9)
•Features internal retention “teeth” which secure LED leads onto spacers.
•This features an internally tapered barrier which guides the leads and
eliminates crimping or shorting.
•The bottom bosses serve the dual purpose of heat dissipation and easy
post soldering cleanup.
MATERIAL: Natural Nylon, UL Rated 94V-2
LED SPACER MOUNTS
91
KEY FEATURES
•Internal design eliminates crimping or shorting of leads
•Self alignment of leads on .100 (.25) centers.
•Spacer will stay gripped to LED leads during assembly
•No special tools required
PINS, PLUGS, JACKS & HARDWARE
Our PCB pins & receptacles, solder terminals, tip, test, banana and
binding post receptacles & terminals, and USB connectors and sockets
offer the most versatility for virtually any device requirements such as:
•Audio Circuitry
•Home theaters
•Electronic test equipment
•Telephone switchboards
•High Speed computer connections
•Telecommunication hook ups
•CATV equipment hook ups
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application.
PINS, PLUGS, JACKS & SOCKETS
93
JACKS AND PLUGS
Audio Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Banana Jacks/Plugs . . . . . . . . . . . . . 106-107
Binding Posts. . . . . . . . . . . . . . . . . . . . . . . . . . 108
Phono Jacks & Plugs . . . . . . . . . . . . . 102-103
Test Jacks/Plugs . . . . . . . . . . . . . . . . 104-105
MICRO PINS /JACKS
Micro Jacks . . . . . . . . . . . . . . . . . . . . . . . 98-99
Micro Pins . . . . . . . . . . . . . . . . . . . . . . . 100-101
Shorting Jacks & Pins. . . . . . . . . . . . . . . . . . . 101
SOCKET, HALOGEN LAMP . . . . . . . . . . . . . . 110
TRANSISTOR
Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . 110-111
Mounting Kits. . . . . . . . . . . . . . . . . . . . . 109-111
Mica Insulators. . . . . . . . . . . . . . . . . . . . . . . . 109
T0-3 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
USB JACKS AND PLUGS
2.0 A and B-Type . . . . . . . . . . . . . . . . . . 94-95
3.0 A and B-Type . . . . . . . . . . . . . . . . . . . . . . . 96
Firewire, IEEE 1394. . . . . . . . . . . . . . . . . . . . . . 97
SECTION CONTENTS
VERTICAL
CAT. NO. 923 CAT. NO. 922CAT. NO. 920
FEATURES
•
Available for on-board applications such as memory sticks
•
Cable clamp style for creating custom cables
•
Gold plated contacts for low contact resistance and excellent reliability
.240 [6.1]
POS. 1
POS. 4
.035 [.90] DIA.
LEG (2) PLS
.087 [2.2]
.079 [2.0]
.047 [1.2]
.177 [4.5]
.472 [12.0]
.734 [18.7]
.571 [14.5]
.177 [4.5]
.275
[7.0]
.118 [3.0]
.280
.516 [13.1]
.405 [10.3]
.551 [14.0]
[7.1]
SURFACE MOUNT
HORIZONTAL DUAL STACKING
THRU HOLE MOUNT
CAT. NO. 932 CAT. NO. 925CAT. NO. 931
CAT. NO. 921
.571
[14.5]
.524
[13.3]
.280
[7.1]
.551 [14.0]
.163 [4.1]
REF.
.112 [2.9]
.225 [5.7]
.059
[1.50]
.177 [4.50]
.472 [12.00]
1.575 [40.00]
REF.
PCB EDGE
.461 [11.7]
.181 [4.6]
.035 [0.9] x
.098 [2.50]
.043 [1.10] DIA.
HOLE (2) PLS
.114 [2.9]
.079 [2.0] .078 [2.0] X
.043 [1.1]
(4) PLS
.098 [2.5]
14
.276 [7.0]
Mounting Detail
.106 [2.7]
.240
[6.1]
POS. 4
.035 [.90] DIA.
LEG (2) PLS
.079 [2.0] .047 [1.2]
.177 [4.5]
.472 [12.0] .734 [18.7]
POS. 1
.035 [.90] DIA.
HOLE (4) PLS
4
1
.043 [1.10] DIA.
HOLE (2) PLS
.083 [2.1]
.035 [0.9] x
.098 [2.50]
.276 [7.0]
.079 [2.0]
.181 [4.6]
PCB EDGE
.114 [2.9]
.461 [11.7]
Mounting Detail
.177 [4.5]
.571 [14.5]
.492 [12.5]
.606 [15.4]
.669 [17.0]
.615
[15.6]
.118 [3.0]
.405 [10.3] .224 [5.7]
CABLE PLUG
.151 [3.8]
.272 [6.9]
.189 [4.8]
.571 [14.5]
.280
.516 [13.1]
.405
[10.3]
.551 [14.0]
[7.1]
921
920
921
920
.091 [2.30]
(4) PLS
.036 [0.92]
DIA. TYP.
.210 [5.4
]
.107 [2.7
.517 [13.2]
.079 [2.00]
.276 [7.0]
.224 [5.7]
Mounting Detail
.036 [0.92] DIA.
(4) PLS
.091 [2.30] DIA.
(2) PLS
.079 [2.00]
.107 [2.7]
.276 [7.0]
.517 [13.2]
Mounting Detail
.036 [0.92] DIA.
(4) PLS
.091 [2.30] DIA.
(2) PLS
.079 [2.00]
.107 [2.7]
.276 [7.0]
.517 [13.2]
Mounting Detail Cat. No. 921
.114 [2.9] TYP.
.043 [1.1]
TYP.
.091 [2.30]
DIA. (2) PLS
.079 [2.00]
.142 [3.6]
.517 [13.2]
.276 [7.00]
Mounting Detail Cat. No. 920
SURFACE MOUNT THRU HOLE MOUNT
USB 2.0 PLUGS & SOCKETS
94
USB 2.0 PLUGS & SOCKETS
ELECTRICAL CHARACTERISTICS
Rated Voltage: 30V (RMS)
Contact Current Rating: 1 Amp DC max.
Contact Resistance: 15 mmax.
Insulation Resistance: 1000 mmin.
Dielectric Withstanding Voltage: 750V AC for 1 minute
MECHANICAL CHARACTERISTICS
Operating Temperature: -13°F (-25°C) to +176°F
(+80°C)
Durability: 1500 Cycles min.
SOCKET SPECIFICATIONS:
Shell: Phosphor Bronze
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze
Contact Area: Gold Flash over Nickel
Solder Trails: Tin over Nickel
PLUG SPECIFICATIONS:
Shell: Steel, Nickel Plate
Insulator: Thermoplastic, Rated UL 94V-0
Contact: Bronze, Gold Flash over Nickel
DEVICE APPLICATIONS
Ability to daisy chain more than one input device
■Mouse/Keyboards
■MP3 Players
■Printers/Scanners
■Digital Cameras/Video
■Memory Sticks
■PDAs and Cell Phones
TYPE A SOCKETS
TYPE A PLUGS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
•Supplied unassembled
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
USB TYPE B SOCKETS/PLUGS
MINI-USB TYPE B SOCKETS/PLUGS
CAT. NO. 924 CAT. NO. 926
CAT. NO. 935
POS. 3
POS. 2
POS. 4
POS. 1
.474 [12.0]
.418 [10.6]
.405 [10.3]
.115 [2.9]
.630 [16.0]
POS. 3
POS. 2
.091 [2.30] DIA.
HOLE (2) PLS
.036 [0.92] DIA.
HOLE (4) PLS
POS. 4
POS. 1
.098 [2.5]
.376 [9.5]
.147 [3.7] .085 [2.1]
Mounting Detail
Mounting Detail
.055 [1.40] DIA.
HOLE (2) PLS
PCB EDGE
1423
.238 [6.0]
.217
[5.5]
.134 [3.4]
.028 [0.7]
.049 [1.3]
.354 [9.0]
REF.
.276 [7.0]
.545 [13.8]
.118 [3.0]
Mounting Detail
.283 [7.2]
.315
[8.0]
1.439 [36.6]
REF.
PIN 5
PIN 1 .378 [9.6]
.232 [5.9]
.156 [4.0]
.059 [1.5]
.303 [7.7]
.173 [4.4]
.039 [1.0]
.217 [5.5]
.116 [3.0]
PIN 1 PIN 5
.965 [24.50]
REF.
.120 [3.0]
.268 [6.81]
PCB EDGE
.031 [0.8]
.166 [4.2]
.205 [5.2]
.035 [0.89] DIA
.080 [2.0]
.020 [0.5]
.181 [4.6]
.098 [2.5]
.172 [4.4]
.129 [3.3]
.428 [10.9]
.047 [1.2] DIA
(2) PLS
POS. 1
POS. 2
POS. 3 POS. 4
.474 [12.0]
.630 [16.0]
.418 [10.6]
.217 [5.5] .354 [9.0]
Tape & Reel Spec’s: 24mm wide; 16mm pitch;
13 inch reel (1000 pieces per reel)
USB 2.0 PLUGS & SOCKETS
MICRO-USB TYPE B SOCKETS/PLUGS
•
Ideal for Miniature applications
CAT. NO. 941
Mounting Detail
.150 [3.8]
.118 [3.00]
.028
[0.7]
.169
[4.3]
.021 [0.55]
.315
[8.0]
.022
[0.6]
.307
[7.8]
.085 [2.1]
.197
[5.0]
.210 [5.3]
.320 [8.0]
.920 [23.5] REF.
.075 [1.9]
SQR
PCB EDGED
.149 [3.80]
.031 [0.8]
HOLE (2) PLS
.026 [0.7]
SPACING
.057 [1.4]
.016 [0.40]
X .055 [1.4]
.141 [3.6]
.161 [4.1]
.386 [9.8]
Tape & Reel Spec’s: 24mm wide; 16mm pitch;
13 inch reel (1000 pieces per reel)
Wiring Detail
PIN 5
PIN 1
ELECTRICAL CHARACTERISTICS
Rated Voltage: 30V (RMS)
Contact Current Rating: 1 Amp DC max.
Contact Resistance: 15 mmax.
Insulation Resistance: 1000 Mmin.
Dielectric Withstanding Voltage: 750V AC for 1 minute
MECHANICAL CHARACTERISTICS
Operating Temperature: -13°F (-25°C) to +176°F (+80°C)
Durability: 1500 Cycles min.
DEVICE APPLICATIONS
SOCKET SPECIFICATIONS:
Shell: Phosphor Bronze
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze
Contact Area: Gold Flash over Nickel
Solder Trails: Tin over Nickel
PLUG SPECIFICATIONS:
Shell: Steel, Nickel Plate
Insulator: Thermoplastic, Rated UL 94V-0
Contact: Bronze, Gold Flash over Nickel
Ability to daisy chain more than one input device
•Memory Sticks
•Mouse/Keyboards
•Printers/Scanners/Docking Stations
•MP3/Audio Devices
•Digital Video Cameras & Still Cameras
•Portable Media Players
•Gaming Headsets
•Smart Phones/PDA's
USB 2.0 PLUGS & SOCKETS
95
CABLE PLUG
CABLE PLUG
CABLE PLUG
SURFACE MOUNT SOCKET
SURFACE MOUNT SOCKET
THRU HOLE SOCKET SURFACE MOUNT SOCKET
•Supplied unassembled
•Supplied unassembled
•Supplied unassembled
CAT. NO. 940 (Bulk)
CAT. NO. 940TR (Tape & Reel)
CAT. NO. 934 (Bulk)
CAT. NO. 934TR (Tape & Reel)
CAT. NO. 933
USB 3.0 PLUGS & SOCKETS
96
USB 3.0 PLUGS & SOCKETS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
USB 3.0 (SUPER SPEED)DEVICE APPLICATIONS:
•External hard drives
•High resolution web & video cameras
•Digital video cameras & still cameras
•Multi-channel audio interfaces
•External media such as Blu-Ray drives
•High-definition video content
•Multi-gigabyte mobile phones
•Portable media players
THRU-HOLE MOUNT SOCKET
SURFACE MOUNT SOCKET
CABLE PLUG
CAT. NO. 945
CAT. NO. 950 CAT. NO. 952
USB TYPE B SOCKETS/PLUGS
MICRO-USB TYPE B SOCKETS/PLUGS
CAT. NO. 955 CAT. NO. 957
USB TYPE A SOCKETS/PLUGS
THRU-HOLE MOUNT SOCKET
.276 [7.0]
.515 [13.1]
.118 [3.0]
.650 [16.5]
.466 [11.8]
.614 [15.6]
.579 [14.7]
.287 [7.3]
CABLE PLUG
CAT. NO. 947
ELECTRICAL CHARACTERISTICS:
Rated Voltage: 30V (RMS)
Contact Current Rating: 1 Amp DC max.
Contact Resistance: 15 mmax.
Insulation Resistance: 1000 Mmin.
Dielectric Withstanding Voltage: 750V AC for 1 minute
MECHANICAL CHARACTERISTICS:
Operating Temperature: -13°F (-25°C) to +176°F(+80°C)
Durability: 1500 Cycles min.
USB 3.0 DESIGN ADVANTAGES:
Port Expansion: Alleviates restriction of limited
COM Ports and available IRQ’s
Compatibility: Backward compatible with
USB 2.0 devices
Fast Data Transfer: Up to 480 Gbps;
10 times faster than USB 2.0 devices
and 200 times faster than serial ports.
SOCKET SPECIFICATIONS:
Shell: Steel, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash
over Nickel
PLUG SPECIFICATIONS:
Shell: Steel, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash
over Nickel
SOCKET SPECIFICATIONS:
Shell: Steel, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash
over Nickel
PLUG SPECIFICATIONS:
Shell: Steel, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash
over Nickel
SOCKET SPECIFICATIONS:
Shell: Phosphor Bronze, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash
over Nickel
Contact Area: Gold Flash over Nickel
Solder Tails: Tin over Nickel
PLUG SPECIFICATIONS:
Shell: Steel, Nickel Plated
Insulator: Thermoplastic, UL Rated 94V-0
Contacts: Phosphor Bronze, Gold Flash over Nickel
Mounting Detail
.027 [0.7] DIA
(9) PLS
.090 [2.3] DIA.
(2) PLS
.079 [2.0] TYP.
.059 [1.5]
.078 [2.00]
.517 [13.1]
.079 [2.0]
.276 [7.0]
.177 [4.50]
.472 [12.00]
1.575 [40.00]
REF.
.506 [12.8]
.197 [5.0]
.116 [3.0]
.526 [13.4]
.537 [13.6]
.187 [4.8]
.024 [0.6]
.085 [2.2]
.098 [2.5]
Mounting Detail
PCB EDGE
.016 [0.40] (5) PLS
.026 [0.6] TYP.
.132 [3.4]
.193 [4.9]
.264 [6.7]
.403 [10.2]
.053 [1.3]
.057 [1.4]
.075 [1.9] SQR
TYP.
.532 [13.5]
.920 [23.4]
.190 [4.8]
.406 [10.3]
.553 [14.0]
.472 [12.0]
.115 [2.9]
.508 [12.9]
.724 [18.4]
Mounting Detail
.091 [2.3] DIA.
(2) PLS.
.028 [0.7] DIA (5) PLS.
.157 [4.0]
.105 [2.7]
.036 [0.9] DIA.
(4) PLS.
.079 [2.0]
.098 [2.5]
.197 [5.0]
.474 [12.0]
.335 [8.5]
.315
[8.0]
1.400 [36.0]
REF.
.411 [10.4]
CABLE PLUG
•Supplied unassembled
•Supplied unassembled
•Supplied unassembled
SUPER SPEED SERIAL BUS - FIREWIRE SOCKETS
FIREWIRE PLUGS & SOCKETS
97
FIREWIRE PLUG
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
THRU HOLE MOUNTTHRU HOLE MOUNT
SURFACE MOUNT
CAT. NO. 930 CAT. NO. 929
FEATURES
•
Snap-In PC tails hold connector in position for soldering
•
Gold Plated contacts for low contact resistance and excellent reliability
SPECIFICATIONS
Shell: Phosphor Bronze
Insulator: Thermoplastic, Rated UL 94V-0
Contacts: Phosphor Bronze
Plating:
Contact Area: Gold Flash over Nickel
Solder Tails: Tin over Nickel Plate
ELECTRICAL CHARACTERISTICS
Rated Voltage: 30VAC (RMS)
Contact Current Rating: 1 Amp DC max.
Contact Resistance: 15 m
Insulation Resistance: 1000 mmin.
Dielectric Withstanding Voltage: 750V AC for 1 minute
Operating Temperature: 32°F (0°C) to +104°F (40°C)
Capacitance: 2pF max.
MECHANICAL CHARACTERISTICS
Durability: >1500 cycles
Mating Force: 35 Newtons min.
Withdrawal Force: 10 Newtons min.
DESIGN ADVANTAGES
Superfast Data Transfer:
Current speeds of 100Mbps, 200Mbps and 400Mbps, and
roadmapped to 1GB to 3.2 GBps per second
Daisy Chaining:
Up to to 63 devices, each one acts as an active repeater on
the bus, with a maximum of 16 repeats
Port Expansion:
Alleviates restriction of limited COM Ports and available IRQ’s
Wide Bandwidth:
Operates in asynchronous or isochronous data streams.
Digital interface designed for high speed applications for PC
peripherals, consumer electronics and communications.
Simple Connections:
True Plug and Play, no jumpers, DIP Switches or IRQ’s to set
Hot Swapping:
Allows peripherals to be connected or disconnected without
turning off computer
Highly Versatile Bus:
One bus can handle a variety of devices operating at different
speed classes for true backwards compatibility
Standard Digital Interface:
Allows consumer electronics and computer devices to
communicate together on one interface
DEVICE APPLICATIONS
■Broadcast TV
■Cable TV
■Digital Camcorders
■Digital Cameras & VCRs
■Computers & Hard Disks
■DVD Players
■Printers & Monitors
■Stereos
FEATURES
•
Modular design allows easy and fast assembly of components
•
Integrated strain relief - crimps to wire insulation
•
Gold Plated contacts for low contact resistance and excellent reliability
.210 [5.3]
1.240 [31.5]
CAT. NO. 928 (Supplied Unassembled)
3
6
5
4
1
2
.031 [0.80] DIA. (8) PLS
.063 [1.60] DIA. (2) PLS
PCB EDGE
.039 [1.0]
.461 [11.7]
.183
[4.7]
.394 [10.0]
.032 [0.8]
.098 [2.5] .333
[8.5]
.079 [2.0] TYP.
.020 [0.5]
Mounting Detail
POS. 2
POS. 6
POS. 1 POS. 5
.183 [4.7]
.654 [16.6]
.532 [13.5]
.079 [2.0]
.327
[8.3]
POS. 1
POS. 5
POS. 2
POS. 6
.079
[2.0]
.059 [1.5]
.262
[6.7]
.532
[13.5]
.713 [18.1]
POS. 2
POS. 1 POS. 5
POS. 6
.183
[4.7]
.079 [2.0]
.532 [13.5]
.327
[8.3]
.571 [14.5]
6
5
4
3
21
PCB EDGE
.183
[4.7]
.039 [1.0]
.461 [11.7]
.394 [10.0]
.008 [0.2]
.333
[8.5]
.098 [2.5]
.039 [1.0]
.028 [0.7]
X .087 [2.2]
Mounting Detail Mounting Detail
IEEE 1394
IEEE 1394
HORIZONTALUP-RIGHTHORIZONTAL
12
6
4
3
5
.031 [0.80] DIA.
(6) PLS
.118 [3.0]
.079 [2.0]
PCB EDGE
.079 [2.0] (3) PLS
.262 [6.7] .414
[10.5]
.039 [1.0]
.284 [7.2]
SPECIFICATIONS
Shell: Phosphor Bronze
Insulator: Thermoplastic, Rated UL 94V-0
Contacts: Phosphor Bronze
Plating:
Contact Area: Gold Flash over Nickel
Solder Tails: Tin over Nickel Plate
ELECTRICAL CHARACTERISTICS
Contact Resistance: 30mmax.
Insulation Resistance: 1000 mmin.
Withstanding Voltage: 500V ± 50V DC
Operating Temperature: 32°F (0°C) to +104°F (40°C)
SUPPLIED ON TAPE AND REEL
Tape & Reel Spec’s: 32mm wide; 24mm
pitch; 13 inch reel (200 pieces per reel)
CAT. NO. 927TR (Tape & Reel)
CAT. NO. 927 (Bulk)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
MICRO JACKS
MICRO JACKS
98
•Space saving design for high
density packaging
•Beryllium Copper multi-spring
contact maintains retention after
multiple insertions
•Ideal for mounting transistors, re-
sistors, diodes, IC’s and similar
miniature components
•Custom micro jacks manufactured
to your specifications
•Other platings available
upon request
.016 [0.41]
.083 [2.11]
.055 [1.40]
L
3-FINGER CLOSED
ENTRY CONTACT
.038 [0.96]
.038
[0.96]
HEX.
.020 [0.50]
.130 [3.3] .095 [2.4]
L
.072 [1.9]
.045 [1.14]
4-FINGER CLOSED
ENTRY CONTACT
.056 [1.42]
.049 [1.24]
.041 [1.04]
.063 [1.60]
4-FINGER CLOSED
ENTRY CONTACT
.205
[5.2]
.089 [2.23]
.248
[6.3]
4-FINGER CLOSED
ENTRY CONTACT
.120 [3.1]
.259 [6.6]
.233 [5.9]
.060 [1.52] DIA.
.014 [0.4] .077 [2.0] DIA.
.015 (.38 ) - .021 (.53) PIN - SOLDER MOUNT .015 (.38) - .021 (.53) PIN - PRESS FIT .015 (.38) - .025 (.64) PIN - TAPER-FIT
.022 (.56 ) - .032 (.81) PIN - SOLDER MOUNT.015 (.38) - .025 (.64) PIN - SOLDER MOUNT.015 (.38) - .025 (.64) PIN - SOLDER MOUNT
.022 (.56) - .034 (.86) PIN - PRESS FIT
.025 (.64) - .037 (.94) PIN - PRESS FIT.025 (.64) - .037 (.94) PIN - SOLDER MOUNT
.055 [1.39]
.072 [1.83]
.016 [0.41]
4-FINGER CLOSED
ENTRY CONTACT
.093 [2.36]
.142 [3.6]
.161 [4.1]
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
1411-1 1431-1 1420-1 .140 (3.6) .042
1411-2 1431-2 1420-2 .170 (4.3) (1.07)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
1412-1 1432-1 1468-1 .140 (3.6) .040
1412-2 1432-2 1468-2 .170 (4.3) (1.02)
1412-3 1432-3 1468-3 .282 (7.2)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
1415-1 1435-1 1469-1 .160 (4.1) .055
1415-2 1435-2 1469-2 .190 (4.8) (1.40)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1693 1694 1695 .063 (1.60)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1413 1433 1470 .059 (1.50)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1603 1606 1607 .052 (1.32)
.061 [1.55]
.015 [0.38]
.028 [0.71]
.091 [2.3]
.086 [2.2]
.170
[4.3]
.200
[5.1]
.070 [1.78]
KNURL
6-FINGER CLOSED
ENTRY CONTACT
6-FINGER CLOSED
ENTRY CONTACT
.057 [1.45]
.077 [1.96]
.083 [2.11]
.025 [0.7]
L
.025 (.64) - .037 (.94) PIN - SOLDER MOUNT
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1416 1436 1471 .067 (1.70)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
1626-1 1614-1 1619-1 .095 (2.4) .062
1626-2 1614-2 1619-2 .105 (2.7) (1.57)
1626-3 1614-3 1619-3 .155 (3.9)
.045 [1.14]
.062 [1.57]
.090 [2.29]
6-FINGER CLOSED
ENTRY CONTACT
.080 [2.03]
.083 [2.11]
.022 (.56) - .034 (.86) PIN - SOLDER MOUNT
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1658 1659 1673 .065 (1.65)
.128
[3.3] .168
[4.3]
.040 [1.02]
.092 [2.34]
.065 [1.65]
L
.200
[5.1]
.230
[5.9]
4-FINGER CLOSED
ENTRY CONTACT
.125 [3.2]
.032 (.81) - .046 (1.17) PIN - SWAGE MOUNT
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
3590 3591 3592 .065 (1.65)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1697 1698 1699 .063 (1.60)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
1419-1 1439-1 1478-1 .062 (1.6) .069
1419-2 1439-2 1478-2 .094 (2.4) (1.75)
PLATING OPTIONS
CONTACT
PLATING BODY SPRING RoHS
Gold/Gold Gold Gold Compliant
Tin/Tin Tin/Lead Tin/Lead Non-Compliant
Tin/Gold Tin/Lead Gold
SPECIFICATIONS
Body: Brass, ASTM-B16
Spring: Beryllium Copper
(QQ-C-533)
.057 [1.45] HEX
.057 [1.45]
DIA.
.200 [5.1]
.020 [0.52]
.078 [1.98] DIA.
6-FINGER CLOSED
ENTRY CONTACT
.165 [4.2]
.078 [1.98] .040 [1.02]
.090 [2.29]
.040 [1.02]
.062 [1.57]
.210 [5.3]
.187 [4.7]
.180 [4.6]
6-FINGER CLOSED
ENTRY CONTACT
RoHS
Plating:
Gold: .000010 per MIL-G-45204
(RoHS Compliant)
Tin/Lead: .000200 to .000300
per MIL-T-10727, Type 1
(Non-RoHS Compliant)
.038 [0.96]
3-FINGER CLOSED
ENTRY CONTACT
L
.055 [1.40]
.083 [2.11]
.016 [0.41]
RoHS
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
®
MICRO JACKS
MICRO JACKS
.195
[5.0]
.084 [2.13] DIA.
.130 [3.3]
.236
[6.0]
4-FINGER CLOSED
ENTRY CONTACT
.126 [3.2]
.020 [0.51]
.085 [2.2]
.091 [2.3]
.192 [4.9]
.125 [3.2]
.220 [5.6]
.032 [0.8]
.124 [3.2]
ENTRY CONTACT
4-FINGER CLOSED
.072 [1.83]
.018
[0.45]
.090 [2.29]
4-FINGER CLOSED
ENTRY CONTACT
.221
[5.6]
.123 [3.1]
.015 [0.37] REF.
KNOCK OUT
PLUG
.018 [0.46]
.098 [2.5]
.120 [3.1]
4-FINGER CLOSED
ENTRY CONTACT
.140 [3.6]
.180
[4.6]
.213
[5.4]
.157 [4.0]
.025 [0.64]
.400
[10.2]
.143 [3.7]
.118 [3.0]
4-FINGER CLOSED
ENTRY CONTACT
.357
[9.1]
.142 [3.6]
.053 [1.34]
.187 [4.8]
.412
[10.5]
4-FINGER CLOSED
ENTRY CONTACT
.340
[8.7]
.100 [2.6]
.157 [4.0]
.143 [3.7]
.125
[3.2]
.070 [1.78]
.165 [4.2]
.140 [3.6]
KNURL
.170 [4.3]
.122 [3.1]
6-FINGER CLOSED
ENTRY CONTACT
.090 [2.3] DIA
.031 [0.8]
.086 [2.2] DIA.
.105 [2.7] DIA
.077 [2.0]
4-FINGER CLOSED
ENTRY CONTACT
.075 [1.9]
.306
[7.8]
.224
[5.7]
.200
[5.1]
.040 (1.02) - .050 (1.27) PIN - SOLDER MOUNT
.032 (.81) - .046 (1.17) PIN - SOLDER MOUNT .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT
.048 (1.22) - .064 (1.63) PIN - SOLDER MOUNT
.032 (.81) - .046 (1.17) PIN - SOLDER MOUNT
.032 (.81) - .046 (1.17) PIN - SOLDER MOUNT
.063 [1.60]
.084 [2.14]
.036 [0.93]
.130 [3.3]
.126 [3.2]
.236
[6.0]
4-FINGER CLOSED
ENTRY CONTACT
.020
[0.50]
.065 (1.65) - .082 (2.08) PIN - SOLDER MOUNT .065 (1.65) - .082 (2.08) PIN - SOLDER MOUNT .084 (2.13) - .102 (2.6) PIN - PRESS-FIT
IC SOCKET CONTACTS FOR .015 (.38) – .025 (.64) LEADS – PRESS-FIT
.032 (.81) - .046 (1.17) PIN - CRIMP BARREL JACK
.072 [1.83]
.031 [0.80]
.101 [2.6]
.203
[5.2]
.160
[4.1]
.053 [1.35]
4-FINGER CLOSED
ENTRY CONTACT
.060
[1.52]
L
.060
[1.52]
.025 [0.63]
SQUARE
4-FINGER CLOSED
ENTRY CONTACT
.053 [1.35]
.160
[4.1]
.193
[4.9]
.101 [2.6]
.031 [0.80]
.072 [1.83]
.016 [0.41]
.100 [2.6]
.118 [3.0]
.260
[6.6]
.290
[7.4]
.096 [2.5]
6-FINGER CLOSED
ENTRY CONTACT
.032 (.81 ) - .046 (1.17) PIN - PRESS-FIT
.032 (.81) - .046 (1.17) PIN - SOLDER MOUNT
.130 [3.3]
.018 [0.47]
.091 [2.3]
.180
[4.6]
.206
[5.3]
.073 [1.9]
4-FINGER CLOSED
ENTRY CONTACT
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1417 1437 1479 .076 (1.93)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1443 1446 1473 .078 (1.98)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1442 1445 1486 .076 (1.93)
.032 (.81 ) - .046 (1.17) PIN - PRESS-FIT
.091 [2.32]
.071 [1.80]
.120 [3.1]
.180
[4.6]
.206
[5.3]
4-FINGER CLOSED
ENTRY CONTACT
.071 [1.80]
HEX.
.018 [0.47]
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1677 1678 1679 .089 (2.26)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1682 1683 1684 .102 (2.6)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1674 1675 1676 .087 (2.21)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1418 1438 1497 .104 (2.6)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1414 1434 1496 .089 (2.26)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1441 1444 1488 .076 (1.93)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1640A 1640B 1640C .138 (3.5)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1687 1688 1689 .146 (3.7)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
1641A 1641B 1641C .122 (3.1)
RoHS NON-RoHS
GOLD/GOLD TIN/TIN TIN/GOLD
CAT. NO. CAT. NO. CAT. NO.
3593 3594 3595
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD L Hole
CAT. NO. CAT. NO. CAT. NO. Length Dia.
3501 3505 3504 .360 (9.2) .057
3502 3506 3508 .510 (13.0) (1.45)
RoHS NON-RoHS Mtg.
GOLD/GOLD TIN/TIN TIN/GOLD Hole
CAT. NO. CAT. NO. CAT. NO. Dia.
3503 3507 3509 .057 (1.45)
.072 [1.83]
.093 [2.36]
.080
[2.1]
.030 [0.77]
.130
[3.3]
.195
[5.0]
4-FINGER CLOSED
ENTRY CONTACT
.220
[5.6]
.082 [2.09]
KNURL
.103 [2.6]
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
99
MICRO PINS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
®
MICRO PINS
100
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
.155 [4.0]
.029 [0.72]
PENTAGON
.056 [1.42]
.060 [1.52]
.030 [0.76]
.018 [0.46]
.180 [4.6]
.080 [2.03]
.028 [0.71]
KNURL
.032 [0.81]
.020 [0.51]
.018 [0.46]
.019 [0.48]
SQUARE
A
.018 [0.46]
.060 [1.52]
.055 [1.40]
.038 [0.97]
.016 [0.41]
.049 [1.24]
.295 [7.5]
.125 [3.2]
.020 [0.51]
.062 [1.57]
.021 [0.53]
.025 [0.64]
.100 [2.6]
.047 [1.19]
L
L
.030 [0.76]
.078 [1.98]
.156 [4.0]
.058 [1.47]
.025 [0.64]
.062 [1.57]
.021 [0.53]
.200 [5.1]
.047 [1.19]
L
.025 [0.64]
.062 [1.57]
.025 [0.64]
.250 [6.4]
.040 [1.02]
.025 [0.64]
.065 [1.64]
.018 (.46) PIN - PRESS-FIT
.018 (.46) PIN- PRESS-FIT
.018 (.46) PIN - PRESS-FIT .020 (.51) PIN - PRESS-FIT
.025 (.64) PIN - SWAGE MOUNT
.025 (.64) PIN - SWAGE MOUNT
.020 (.51) PIN - SOLDER MOUNT
.045 [1.14]
.020 [0.51]
.020 [0.51]
.020 [0.51]
A
.100 [2.6]
.025 (.64) PIN - SWAGE MOUNT .025 (.64) PIN - SWAGE MOUNT
•Precision engineered and manufactured
• Space saving design for high density packaging
•Micro pins are available in .017 (.43) to .080 (2.03) diameters
•Ideal for mating with our standard line of micro jacks
•Available for press-fit, swage or solder mounting
•Custom micro pins manufactured to your specifications
•Other platings available upon request
SPECIFICATIONS
Material: Brass, ASTM-B16
Plating:
Gold: .000010 per MIL-G-45204
Tin: .000200 to .000300 per
MIL-T-10727, Type 1
(RoHS Compliant)
MATERIAL: Phosphor Bronze
DASH NUMBERS (L Dimension)
-1 for .032 (.81) thick Board
-2 for .062 (1.57) thick Board
-3 for .093 (2.36) thick Board
-4 for .125 (3.2) thick Board
Example: 1967-1 for .032 (.81) thick Board
1967-2 for .062 (1.57) thick Board
GOLD TIN A Mtg. Hole
CAT. NO. CAT. NO. Dim. Dia.
1992-2 1994-2 .243 (6.2) .022
1993-2 1995-2 .140 (3.6) (.56)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1996-2 1997-2 .040 (1.01)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1990-2 1991-2 .026 (.66)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1988-2 1989-2 .026 (.66)
GOLD TIN A Mtg. Hole
CAT. NO. CAT. NO. Dim. Dia.
1998-3 2000-3 .250 (6.4) .024
1999-3 2001-3 .425 (10.8) (.61)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1404-1 1424-1 .051 (1.3) .052
1404-2 1424-2 .082 (2.1) (1.32)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1408-1 1428-1 .062 (1.6) .062
1408-2 1428-2 .094 (2.4) (1.57)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1407-1 1427-1 .051 (1.3) .052
1407-2 1427-2 .082 (2.1) (1.32)
RoHS
.020 [0.51]
.051 [1.30]
.010 [0.25]
.050 [1.27]
.031 [0.79]
.225 [5.7]
.020 (.51) PIN - SWAGE MOUNT
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1366-1 1367-1 .035 (.89)
.020 (.51) PIN - SWAGE MOUNT
.025 (.64) PIN - SWAGE MOUNT
.025 [0.64]
L
.025 [0.64]
.062 [1.57]
.040 [1.02]
.150 [3.8]
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1372-1 1373-1 .051 (1.3) .031
1372-2 1373-2 .082 (2.1) (.78)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1368-1 1369-1 .051 (1.3) .043
1368-2 1369-2 .082 (2.1) (1.09)
1368-3 1369-3 .113 (2.9)
.017 (.43) PIN - SOLDER MOUNT.017 (.43) PIN -SWAGE MOUNT
.030 [0.76]
.186 [4.7]
.078 [1.98]
.049 [1.24]
L
.017 [0.43]
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1967-1 1968-1 .051 (1.3) .052
1967-2 1968-2 .082 (2.0) (1.32)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1378-1 1379-1 .022 (.56)
L
.010 [0.25]
.050 [1.27]
.020 [0.51]
.050 [1.27]
.027 [0.68]
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1401-1 1421-1 .043 (1.09)
.018 (.46) PIN - PRESS-FIT
.018 [0.46]
.145 [3.7]
.045 [1.14]
.045 [1.14]
.020 [0.51]
.028 [0.71]
KNURL
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1986-1 1987-1 .026 (.66)
.060 [1.52]
.025 [0.64]
.213 [5.4]
.030 [0.76]
L
.024 [0.61]
.024 (.61) PIN - SWAGE MOUNT
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1406-1 1426-1 .047 (1.2) .035
1406-2 1426-2 .078 (1.9) (.89)
.019 [0.48]
.016 [0.41] .061 [1.55]
.017 [0.43]
.173 [4.4] .039 [0.99]
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
MICRO PINS
MICRO PINS
CAT. NO. 1218
.040 [1.02]
.040 [1.02]
.080 [2.03]
.047 [1.19]
KNURL .832
[21.2]
.250
[6.4]
.193
[4.9]
.040 (1.0) HOLLOW PIN - SWAGE MOUNT.040 (1.0) KAY PIN - PRESS-FIT
MATERIAL:
Solid Nickel Silver
Mtg. Hole
.043 (1.09) Dia.
.312
[7.9]
.115
[2.9]
.458
[11.7]
.075 [1.91]
.040 [1.02]
.052 [1.32]
.031 (.79) PIN- SOLDER MOUNT .032 (.81) PIN- SWAGE MOUNT
.035 (.90) PIN- SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT
.040 (1.0) PIN - SWAGE MOUNT
.040 (1.0) PIN - SWAGE MOUNT
.050 (1.3) PIN - SWAGE MOUNT
.063 (1.6) PIN - SWAGE MOUNT .080 (2.0) PIN - SWAGE MOUNT .080 (2.0) PIN - SWAGE MOUNT
INSULATED SHORTING JACK
.040 (1.0) PINS
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1360-2 1361-2 .064 (1.63)
TIN Mtg. Hole
CAT. NO. Dia.
1219 .059 (1.50)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1358-1 1359-1 .051 (1.3) .043
1358-2 1359-2 .082 (2.1) (1.09)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1356-1 1357-1 .051 (1.3) .076
1356-2 1357-2 .082 (2.1) (1.93)
1356-3 1357-3 .113 (2.9)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1374-1 1375-1 .051 (1.3) .067
1374-2 1375-2 .082 (2.1) (1.70)
1374-3 1375-3 .113 (2.9)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1354-1 1355-1 .051 (1.3) .052
1354-2 1355-2 .082 (2.1) (1.32)
GOLD TIN L Mtg. Hole
CAT. NO. CAT. NO. Length Dia.
1405-1 1425-1 .051 (1.3) .043
1405-2 1425-2 .082 (2.1) (1.09)
1405-3 1425-3 .113 (2.9)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1402-3 1422-3 .062 (1.57)
GOLD TIN A B L
CAT. NO. CAT. NO. Dim. Dia. Length
1447-1 1455-1 .335 (8.5) .156 (4.0) .051 (1.3)
1447-2 1455-2 .400 (10.2) .125 (3.2) .094 (2.4)
1447-3 1455-3 .400 (10.2) .125 (3.2) .125 (3.2)
1447-4 1455-4 .400 (10.2) .125 (3.2) .156 (4.0)
BLUE RED BLACK A W
CAT. NO. CAT. NO. CAT. NO. Dim. Dim.
1487L 1487R 1487B .200 (5.1) .375 (9.5)
1400L 1400R 1400B .400 (10.2) .620 (15.7)
MATERIAL:
Insulator:
Polypropylene
Blue, Red or Black
Spring: Beryllium
Copper, Gold Plate
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1362-2 1363-2 .067 (1.70)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1364-2 1365-2 .094 (2.38)
.040 [1.02]
.400 [10.2]
.070 [1.78]
L
.020 [0.51]
.040 [1.02]
.090 [2.29]
B
L
A
.080 [2.03]
.025 [0.64]
.040 [1.02]
.050 [1.27]
.040 [1.02]
.094 [2.39]
.072 [1.83]
.022 [0.56]
.020 [0.51]
.172 [4.4]
.125 [3.2]
L
.156 [4.0]
.530 [13.5]
.080 [2.03]
.082 [2.08]
.090 [2.29]
.030 [0.76]
.098 [2.5] .194 [5.0]
.457 [11.6]
.063 [1.60]
.057 [1.45]
.063 [1.60]
.093 [2.36]
.094 [2.39]
.060 [1.52]
.031 [0.79]
.094 [2.39]
.250 [6.4]
.050 [1.27]
.032 [0.81]
.050 [1.27]
.030 [0.76]
L
.078 [1.98]
.050 [1.27]
.342 [8.7]
.187 [4.8]
.093 [2.36]
.030 [0.76]
.270 [6.9]
.058 [1.47]
.040 [1.02]
.125 [3.2]
A
W
.120 [3.1]
DIA.
.500 [12.7]
.125 [3.2]
.062 [1.57]
.030 (.76) PIN - SWAGE MOUNT
.030 [0.76]
.020 [0.5]
.094 [2.39]
.062 [1.57]
.250 [6.4]
L
.080 (2.0) PIN - SWAGE MOUNT
.080 [2.03]
.042 [1.07]
.090 [2.29]
.300 [7.6]
.105 [2.7]
.125 [3.2]
.040 [1.02]
.020 [0.51]
.320 [8.2]
.040 [1.02]
.070 [1.78]
L
.031 [0.79]
.320 [8.2]
.040 [1.02]
.020 [0.51]
.070 [1.78]
.028 [0.71]
.025 (.64) PIN - SWAGE MOUNT
.025 [0.64]
.094 [2.39]
.062 [1.57]
.062 [1.57]
.047 [1.19]
.437 [11.1]
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1370-2 1371-2 .052 (1.32)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1380-1 1381-1 .062 (1.57)
.062 [1.55]
.035 [0.90] DIA.
.030 [0.75]
.130 [3.30]
.058 [1.45]
A
.040 [1.0]
DIA WIRE .261 [6.7]
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1352-1 1353-1 .043 (1.09)
GOLD TIN Mtg. Hole
CAT. NO. CAT. NO. Dia.
1376-2 1377-2 .094 (2.38)
MATERIAL:
Pin: Brass,
Gold Plate
MATERIAL:
Insulator: Polypropylene
Blue, Red or Black
Pin: Brass, Gold Plate
Non-insulated A
CAT. NO. Dim.
1430-1 .200 (5.1)
1430-2 .250 (6.4)
1430-4 .400 (10.2)
1430-5 .500 (12.7)
BLUE RED BLACK A W
CAT. NO. CAT. NO. CAT. NO. Dim. Dim.
1460L 1460R 1460B .200 (5.1) .375 (9.5)
1461L 1461R 1461B .250 (6.4) .375 (9.5)
1462L 1462R 1462B .400 (10.2) .620 (15.7)
1463L 1463R 1463B .500 (12.7) .620 (15.7)
SHORTING PIN
INSULATED SHORTING PLUG
.062 [1.57]
.040 [1.02]
.125 [3.2]
.500 [12.7]
A
W
.181 [4.6]
.120 [3.1]
DIA.
•For .040 (1.0) Pins
101
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SNAP-FIT PC MOUNT
CAT. NO. 911
.200 [5.1]
.400 [10.2]
.105 [2.7]
DIA.
(3) PLS
.062 [1.57] DIA.
Mounting Detail
.531 [13.5]
.669 [17.0]
.936 [23.8]
.232 [5.9]
REF.
.169 [4.3]
.157 [4.0]
.467
[11.9]
.421 [10.7]
.469
[11.9] .260
[6.6]
.098 [2.5]
MAX.
(3) PLS
.039 [.99]
.425 [10.8]
DIA.
.375-32 THREAD
•
Low profile
•
Snap-fit mounting for positive retention during wave soldering
•
Rugged, stable construction facilitates reliable mating
•
High reliability, manufactured using Nickel Plated Brass bodies and Tin Plated
Phosphor Bronze contacts
•
Supplied with washer and nut
ROUND BASE HEX BASE
SCHEMATIC
.375 [9.6]
DIA. .328 [8.4]
DIA.
.437
[11.1]
.350 [8.9]
[21.1] .260
[6.6]
.250-32
THREAD
.830
.062 [1.57]
DIA.
CAT. NO. INSULATOR COLOR
581 WHITE
582 RED
576 BLACK
583 YELLOW
.375 [9.5]
HEX.
.437
[11.1]
.250-32
THREAD
.260 [6.6]
.830
[21.1]
.350 [8.9]
.328 [8.4]
DIA.
.062 [1.57]
DIA.
•
Mates with .125 (3.12) dia. pin
•
Mounts to panel in .296 (7.6) dia. hole
•
Color coded for ease of identification
•
Complete with nut and solder lug
•
Mates with .125 (3.2) diameter pins
•
Features a normally closed circuit
•
Various colors for circuit identification
•
Snap-fit mounting for positive retention during wave soldering
SPECIFICATIONS
Housing: PBT
Ground Terminal: .020 (.51) Brass, Nickel Plate ➀
Spring Contact: .012 (.30) Phosphor Bronze,
Silver Plate ➂
Shunt Terminal: .016 (.41) thick Brass, Silver Plate ➃
.295 [7.5]
.157 [4.0]
.386
[9.8]
.209 [5.3]
.315 [8.0]
.256 [6.5]
(TOP VIEW) .082 [2.08]
DIA.
(3) PLS
.090 [2.29] DIA.
.078 [1.98] DIA.
(2) PLS
1
4
3
Mounting Detail
CAT. INSULATOR
NO. COLOR
970 WHITE
971 RED
972 BLACK
973 YELLOW
.157 [4.0]
.551 [14.0]
.315 [8.0]
.098 [2.5]
.354 [9.0]
.413
[10.5]
.256 [6.5]
.512
[13.0]
.453
[11.5]
.327
[8.3]
.075 [1.91]
.209 [5.3]
.295 [7.5]
1
4
.394 [10.0]
3
TO ACCEPT
.125 [3.2] PIN
3
1
4
MATERIAL:
Brass, Nickel Plate
CAT. NO. INSULATOR COLOR
598 WHITE
580 RED
574 BLACK
599 YELLOW
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PHONO JACKS & PLUGS
102
PANEL MOUNT PHONO JACKS
“F” FEMALE CONNECTOR
PHONO PLUGS
COLOR KEYED - PC PHONO JACKS
CONVENTIONAL TYPE
CAT. NO. 565
CRIMP OR SOLDER TYPE EXTRA LONG HANDLE
•
Mates with .125 (3.2) diameter jacks
.175 [4.5]
DIA.
1.062
[27.0]
.312
[7.9]
.125 [3.2] DIA.
.562
[14.3]
.500
[12.7]
MAX.
CAT. NO. 561 CAT. NO. 567
STRAIN RELIEF LUG CRIMPS TO WIRE INSULATION
.156 [4.0]
DIA.
.750
[19.1]
.500
[12.7]
MAX.
.562
[14.3]
.125 [3.2] DIA.
.130 [3.3]
.500
[12.7]
MAX.
.125 [3.2] DIA.
.562
[14.3]
1.300
[33.0]
MAX.
DIA.
MATERIAL:
Shell: Brass, Nickel Plate
Pin: Brass, Nickel Plate
MATERIAL:
Shell: Steel, Tin Plate
Pin: Brass, Nickel Plate
MATERIAL:
Shell: Steel, Tin Plate
Pin: Brass, Nickel Plate
MATERIAL:
Shell: Steel, Tin Plate
Body: Brass, Nickel Plate
Contacts: Brass, Tin Plate
CHOICE OF TIN OR GOLD PLATE
MATERIAL:
Base: Steel, Tin Plate
Shell: Steel, Nickel Plate
Contact: Brass, Tin Plate
Complete one piece jack for insertion into PC board.
Time Saving. No Wiring Required.
CAT. NO. 902
.200 [5.1]
.400 [10.2]
.105 [2.7]
DIA.
(3) PLS
.062 [1.57] DIA.
Mounting Detail
MATERIAL:
Shell: Steel
Contact: Brass
Plating: Tin or Gold
MATERIAL:
Shell: Steel, Tin Plate
Contact: Brass, Tin Plate
CAT. NO. 571
.546 [13.9]
.285
[7.3]
.107 [2.7]
DIA.
(2) PLS
.060 [1.52] DIA.
Mounting Detail
.105 [2.7]
DIA.
.343 [8.7]
Mounting Detail
Complete one piece jack for insertion
into PC board.
Time Saving. No Wiring Required.
Snap-fits into PC board.
•
Mounted on bracket ready for insertion into pre-drilled holes
•
Solder lug allows remote attachment of signal to PC board
.465 [11.8] .255 [6.5]
.100 [2.6]
(3) PLS
.571 [14.5]
.218 [5.6]
REF.
.328 [8.4]
DIA.
.160 [4.1]
.257 [6.6]
.465 [11.8]
.050 [1.27]
.265 [6.8]
.415 [10.6]
.598 [15.2]
REF.
.378 [9.6]
.328 [8.4]
DIA.
.320
[8.2]
.570
[14.5]
.050 [1.27] .100 [2.6]
(2) PLS
.878
[22.3]
.560 [14.2]
.570 [14.5]
.120 [3.1]
.656
[16.7]
MIN.
.100 [2.6]
(2) PLS
.656
[16.7]
.187 [4.8]
[6.4]
.328 [8.4]
DIA.
.438
[11.1]
.344 [8.8]
.250
•
For applications requiring staking to product
CAT. NO. 573
MATERIAL:
Shell: Steel, Tin Plate
Contact: Brass, Tin Plate
Mounting Detail
.105 [2.7]
(2) PLS
.656 [16.7]
.500 [12.7]
.328 [8.4] DIA.
.312 [7.9]
.554 [14.1]
.500 [12.7]
.045 [1.14]
.125 [3.2]
(2) PLS
.250 [6.4]
.156 [4.0] DIA.
• Snaps into holes on PC board and firmly held for soldering
• No staking required
CAT. NO. 572
MATERIAL:
Shell: Steel, Tin Plate
Contact: Brass, Tin Plate
.130 [3.3]
DIA.
.070
[1.8]
.420
[10.7]
.085 [2.2]
DIA. (2) PLS
Mounting Detail
.328 [8.4] DIA.
.390 [9.9]
.410 [10.4]
.297 [7.6]
.096 [2.44]
.062 [1.6]
.414 [10.6]
.261 [6.6]
.162 [4.1]
• Extra long, one piece shell to accept plugs with longer pins for greater contact
• Snaps into holes on PC board and firmly held for soldering
• No staking required
MATERIAL:
Shell: Steel, Nickel Plate
Contact: Brass, Tin Plate
.085 [2.16] DIA.
(2) PLS
.420 [10.7]
.075
[1.90]
.090 [2.29]
DIA.
Mounting Detail
.070 [1.78]
(2) PLS
.875 [22.2]
.843 [21.4]
.400 [10.2]
.328 [8.4] DIA.
.050 [1.27]
.655 [16.7]
CAT. INSULATOR
NO. COLOR
584 WHITE
577 RED
585 BLACK
586 YELLOW
HORIZONTALVERTICAL
TIN PLATE INSULATOR GOLD PLATE
CAT. NO. COLOR CAT. NO.
587 WHITE 936
588 RED 937
901 BLACK 900
589 YELLOW 938
•
Black insulator ring.
• Red insulator ring
• White insulator ring
•
Red insulator ring
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PC PHONO JACKS
103
90° PC PHONO JACK SNAP-FIT 90° PC PHONO JACKS
PC PHONO JACKS
SNAP-FIT VERTICAL PC JACK SNAP-FIT VERTICAL PC PHONO JACKS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
PLUGS & JACKS
FULLY INSULATED STANDARD TIP JACKFULLY INSULATED DELUXE TIP JACK
MATERIAL:
Body: Molded Nylon ASTM D4066
Contact: Beryllium Copper, Silver Plate
Terminal: Brass, Tin Plate
ACCEPTS .080 (2.0) TIP ACCEPTS .080 (2.0) TIP ACCEPTS .080 (2.0) TIP WITH CLOSED ENTRY CONTACT
MATERIAL:
Body: Molded Nylon ASTM D4066
Contact: Phosphor Bronze, Tin Plate
MATERIAL:
Body: Molded Nylon
ASTM D4066
Shell: Brass, Nickel Plate
Contact: Phosphor Bronze,
Silver Plate
MATERIAL:
Body: Brass, Nickel Plate
Contact: Beryllium Copper
Current Rating: 15 Amps
NUT .209
[5.3]
.250-32
THREAD
.562 [14.3]
.375 [9.5]
NUT
.375 [9.5]
DIA.
.844 [21.5].188 [4.8]
.080 (2.0) DIAMETER TIP .080 (2.0) DIAMETER TIP
MATERIAL:
Body: Molded Nylon
ASTM D4066
Shell & Nut: Brass QQ-B-626,
Nickel Plate QQ-N-290
Contact: Beryllium Copper
for QQ-C-533. Gold Plate
MIL-G-45204
ACCEPTS .080 (2.0) TIP WITH CLOSED ENTRY CONTACT ACCEPTS .080 (2.0) TIP
CAT. NO. COLOR
6030 WHITE
6031 RED
6032 BLACK
6033 GREEN
6034 YELLOW
6035 BLUE
CAT. NO. COLOR
6018 WHITE
6019 RED
6020 BLACK
6021 GREEN
6022 YELLOW
6023 BLUE
Fully molded body with recessed closed entry design. Assures maximum retention with .010 max-
imum contact resistance. Prevents accidental insertion of larger diameter probes. Current
rating: 10 Amps. Breakdown voltage 5700V RMS. Capacitance to metal panel 2.0 pF nominal. Sup-
plied with nut.
Economical tip jacks with molded Nylon body. Low contact resistance. Formed Phosphor Bronze
contact with solder hole for ease in attaching wire. Current rating 10 Amps. Breakdown voltage
5700 VRMS. Capacitance to metal panel 3.8 pF. Supplied with nut.
NUT .209
[5.3]
.250-32
THREAD
.562 [14.3]
.750 [19.1]
.375 [9.5]
NUT
.375 [9.5]
DIA.
.188 [4.8]
UNINSULATED TIP JACKMETAL-CLAD TIP JACK (STD)METAL-CLAD TIP JACK (MIL)
High quality tip jack for high reliability industrial applications. Ideal for
use where required to withstand severe environmental conditions, tem-
perature, vibration and salt spray. Recessed closed entry contact. Cur-
rent rating 10 amps. Breakdown voltage: 5700V RMS. Made to
MIL-C39024/10. Capacitance to metal panel 2.0 pF. Supplied com-
plete with hardware.
Quality, precision machined tip jack made of brass. Ideal for use on
metal panels where grounding is required. Fits panels up to .375 (9.5)
Thick. Supplied with nut.
Molded Nylon body with metal jacket. Contact is formed from phos-
phor bronze contact with solder hole for ease in attaching wire. De-
signed for positive contact, easy insertion and withdrawal. Current
rating: 10 Amps. Breakdown voltage 5700V RMS. Capacitance to
metal panel 3.8 pF. Supplied with nut.
SOLDER TIP PLUGS SOLDERLESS TIP PLUGS STANDARD PHONE TIP
.080 (2.0) DIAMETER TIP
Designed for miniaturization where space is criti-
cal. Solder lead connection. Maximum reliability
with minimum contact resistance. Base of tip is
recessed to eliminate shock or grounding. Fits all
standard jacks.
MATERIAL:
Tip: Brass, Nickel Plate
Handle: Nylon 6/6
Current Rating: 10 Amps.
CAT. NO. COLOR CAT. NO. COLOR
6006 WHITE 6009 GREEN
6007 RED 6010 YELLOW
6008 BLACK 6011 BLUE CAT. NO. 1601
Accepts up to 12 gauge wire. Fits all standard
tip jacks.
.395
[10.1]
LOCKWASHER
.343 [8.7] HEX. NUT
.250-32 THREAD
.632 [16.1]
.156 [4.0] .812 [20.6]
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
.312 [7.9]
HEX.
.281 [7.2]
DIA.
.395 [10.1]
NUT
.250-32 THREAD
.632 [16.1]
.281 [7.2]
DIA.
.156 [4.0]
.312 7.9] HEX.
.375 [9.5]
NUT
.906 [23.0]
.375 [9.5] HEX. NUT
.250-32 THREAD
.593 [15.1]
.812 [20.6]
.312 [7.9]
HEX.
.281 [7.2]
DIA.
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
.093
[2.4]
CAT. NO. 6097
1.000 [25.4]
.500 [12.7]
.080 [2.03] DIA.
.156 [4.0]
DIA. .125 [3.2]
DIA.
.500
[12.7]
REF.
.875 [22.2]
.375 [9.5]
DIA.
.156 [4.0] DIA.
TO ACCEPT WIRE.
.080 [2.03] DIA.
.070 [1.78] DIA.
TO ACCEPT WIRE. .875 [22.2]
.080 [2.03] DIA.
.187 [4.8]
DIA. .113 [2.9]
DIA.
.328 [8.4]
REF.
Fully insulated molded nylon sleeve. Maximum reli-
ability with minimum contact resistance. Recessed
metal head eliminates possibility of shock or
grounding. Designed for solderless connection of up
to 16 gauge stranded wire which fits through handle
and tip and is secured by screwing handle tight. Fits
all standard tip jacks.
MATERIAL:
Tip: Brass, Nickel Plate
Handle: Nylon 6/6
Current Rating: 10 Amps.
MATERIAL: Brass, Nickel Plate
104
CAT. NO. COLOR
6012 WHITE
6013 RED
6014 BLACK
6015 GREEN
6016 YELLOW
6017 BLUE
CAT. NO. COLOR
6024 WHITE
6025 RED
6026 BLACK
6027 GREEN
6028 YELLOW
6029 BLUE
CAT. NO. COLOR CAT. NO. COLOR
6000 WHITE 6003 GREEN
6001 RED 6004 YELLOW
6002 BLACK 6005 BLUE
HIGH TEMPERATURE PTFE INSULATED TEST POINT JACKS
.080 [2.0] PC TEST JACKS
SPECIFICATIONS
Terminal Jack: Beryllium Copper (QQ-C-533)
*Brass ASTM B16
Plating: Gold per MIL-G-45204, Type II
Operating Tempuature: -60 (-50) to + 500
A
R
C
E
B
D
A
R
E
C
TEST JACKS
105
E
.140 [3.6]
R
D
.125 [3.2]
C
B DIA.
A
Bushing:
White PTFE (RoHS Compliant)
Red or Black PTFE (Non-RoHS Compliant)
RoHS
RoHS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
* Terminal Material: Brass ASTM B16
D
.047 [1.2]
DIA. (2) PLS.
.055 [1.4]
DIA.
.200
[5.1]
Mounting Detail
MATERIAL:
Body: Nylon per ASTM D4066
Contact: Brass, Silver Plate
MATERIAL:
Body: Nylon per ASTM D4066
Contact: Beryllium Copper, Silver Plate
Mounting: Snap-fits into .052 (1.32) hole
VERTICAL
LOW PROFILE HORIZONTAL UNIVERSAL HORIZONTAL MINIATURE HORIZONTAL
SNAP-FIT VERTICAL
CAT. NO.COLOR
6036 WHITE
6037 RED
6038 BLACK
6039 YELLOW
6040 GREEN
6041 BLUE
CAT. NO.COLOR
6042 WHITE
6043 RED
6044 BLACK
6045 YELLOW
6046 GREEN
6047 BLUE
.048 [1.2]
DIA.
.312 [7.9]
.125 [3.2]
.187 [4.8] DIA.
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
.039 [0.99] x
.045 [1.14]
.125 [3.2]
.312 [7.9]
.187 [4.8] DIA.
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
CAT. NO.COLOR
6048 WHITE
6049 RED
6050 BLACK
6051 YELLOW
6052 GREEN
6053 BLUE
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
.200
[5.1]
.203
[5.2]
.208
[5.3]
.147
[3.7]
.125
[3.2]
.048
[1.2]
.133
[3.4]
.008
[.20]
MATERIAL:
Body: Nylon per ASTM D4066
Contact: Beryllium Copper,
Silver Plate
CAT. NO.COLOR
6054 WHITE
6055 RED
6056 BLACK
6057 YELLOW
6058 GREEN
6059 BLUE
.125
[3.2]
.048
[1.2]
.410 [10.4]
SPRING CONTACT TO
ACCEPT .080 [2.03]
.133
[3.4]
DIA. PIN .156
[4.0]
.008 [.20]
.203
[5.2]
.400 [10.2]
MATERIAL:
Body: Nylon per ASTM D4066
Contact: Beryllium Copper,
Silver Plate
GOLD PLATE SILVER PLATE
CAT. NO. COLOR CAT. NO.
6060 WHITE 6066
6061 RED 6067
6062 BLACK 6068
6063 YELLOW 6069
6064 GREEN 6070
6065 BLUE 6071
MATERIAL:
Body: Nylon per ASTM
D4066
Contact: Beryllium
Copper, Gold or
Silver Plate
.400 [10.2]
SPRING CONTACT TO
ACCEPT .080 [2.03]
DIA. PIN
.008 [.20]
.460 [11.7]
.220
[5.6]
.156
[4.0]
.048
[1.2]
.133
[3.4]
.130
[3.3]
FIG. 1 FIG. 2 FIG. 3
RoHS NON-RoHS
White Red Black Tip Dia. Tip
CAT NO. CAT NO. CAT NO. FIG. A B C D E R ± .001 (.03) Length
11001 11001-R 11001-B 1 .142 (3.6) .120 (3.0) .244 (6.2) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .205 (5.2)
11002 11002-R 11002-B 1 .142 (3.6) .120 (3.0) .283 (7.2) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .245 (6.2)
11003 11003-R 11003-B 1 .172 (4.4) .140 (3.6) .142 (3.6) .050 (1.3) .060 (1.5) .080 (2.0) .040 (1.0) .125 (3.2)
11004 11004-R 11004-B 1 .172 (4.4) .148 (3.8) .179 (4.5) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .140 (3.6)
11005 11005-R 11005-B 1 .218 (5.5) .185 (4.7) .301 (7.6) .050 (1.3) .105 (2.7) .125 (3.2) .080 (2.0) .315 (8.0)
11006 11006-R 11006-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .120 (3.0) .074 (1.9) .080 (2.0) .195 (4.9)
11007 11007-R 11007-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .120 (3.0) .074 (1.9) .090 (2.3) .195 (4.9)
11008 11008-R 11008-B 1 .218 (5.5) .185 (4.7) .301 (7.6) .046 (1.2) .120 (3.0) .074 (1.9) .080 (2.0) .225 (5.7)
11009 11009-R 11009-B 1 .218 (5.5) .185 (4.7) .400 (10.2) .050 (1.3) .187 (4.8) .074 (1.9) .080 (2.0) .280 (7.1)
11010 11010-R 11010-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .136 (3.5) .074 (1.9) .080 (2.0) .340 (8.6)
11011 11011-R 11011-B 2 .218 (5.5) — .430 (10.9) — .150 (3.8) .050 (1.3) .080 (2.0) .200 (5.1)
11012* 11012-R* 11012-B* 2 .218 (5.5) — .500 (12.7) — .150 (3.8) .050 (1.3) .080 (2.0) .280 (7.1)
11013 11013-R 11013-B 3 .218 (5.5) .187 (4.8) .689 (17.5) .500 (12.7) .125 (3.2) .050 (1.3) .080 (2.0) .500 (12.7)
11014 11014-R 11014-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .400 (10.2) .125 (3.2) .050 (1.3) .080 (2.0) .250 (6.4)
11015 11015-R 11015-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .400 (10.2) .187 (4.7) .035 (.89) .080 (2.0) .250 (6.4)
11016 11016-R 11016-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .500 (12.7) .125 (3.2) .050 (1.3) .080 (2.0) .250 (6.4)
Accepts
EXTERNAL THREAD
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
BANANA PLUGS
106
STANDARD SOLDERLESS
CAT.
NO. COLOR
6078 RED
6079 BLACK
MATERIAL:
Spring: Nickel Silver
Body: Brass, Nickel Plate
Handle: Nylon
MATERIAL:
Spring: Nickel Silver
Body: Brass, Nickel Plate
Handle: Nylon
MATERIAL:
Spring: Phosper Bronze
Body: Brass, Nickel Plate
Handle: Nylon
CAT.
NO. COLOR
6084 RED
6085 BLACK
.875 [22.2]
.156 [4.0] DIA.
TO ACCEPT
WIRE.
.375 [9.5] DIA.
.160 [4.1] DIA.
.531 [13.5]
.608 [15.5]
.175 [4.5]
2-56 x
.187 [4.8] L.
SCREW
.281 [7.2]
1.000 [25.4]
.093 [2.36] DIA. x
.328 [8.33] DEEP
TO ACCEPT WIRE.
.375 [9.5] DIA.
.228 [5.8] DIA.
.562 [14.3]
.175 [4.5]
.175 (4.5)
Plug
.175 (4.5)
Plug
.175 (4.5)
Plug
SOLDERLESS CONNECTION SOLDERLESS WITH SET SCREW SOLDERLESS CONNECTION
RED BLACK
CAT. CAT. WIRE
NO. NO. CONNECTION
6080 6081 SOLDER
6082 6083 SOLDERLESS
.312 [7.9] HEX
.187 [4.8] DIA.
.175 [4.5]
.562 [14.3]
1.000 [25.4]
.375 [9.5] DIA.
CRIMP HOLE
6082 / 6083 ONLY
SOLDER INSERT
6080 / 6081 ONLY
.812 [20.6]
MATERIAL:
Spring: Beryllium Copper
Body: Brass, Nickel Plate
CAT. NO. 652
MATERIAL:
Spring: Beryllium Copper (Cat. No. 653)
Spring: Phospor Bronze (Cat. No. 654, 655)
Body: Brass, Nickel Plate
.312 [7.9]
.175 [4.5]
.437 [11.1]
.093
[2.36]
.109 [2.8]
DIA.
.500 [12.7]
.125 [3.2]
8-32 THREAD
.250 [6.4] .218 [5.6]
.175 [4.5]
6-32
THREAD
L
H
A
.175 (4.5)
Plug
CAT. NO. 657
MATERIAL:
Spring: Beryllium Copper
Body: Brass, Nickel Plate
.375 [9.5]
.550 [14.0]
.750 [19.1]
1.250 [31.8]
.250 [6.4]
6-32
THREAD
.175 [4.45]
.093 [2.4] DIA.
.175 (4.5)
Plug
.175 (4.5)
Plug
CAT.
NO. HLA
653 1.062 (27.0) .500 (12.7) .437 (11.1)
654 .937 (24.7) .188 (4.8) .550 (14.0)
655 1.250 (31.8) .500 (12.7) .550 (14.0)
SOLDER LUG FOUR LEAF SPRING BARREL SPRING
STANDARD RIVET
INTERNAL THREAD
MATERIAL:
Four Leaf Spring: Phosphor Bronze,
*Barrel Spring, Beryllium Copper
Body: Brass, Nickel Plate
MATERIAL:
Four Leaf Spring: Phosphor Bronze,
*Barrel Spring, Beryllium Copper
Body: Brass, Nickel Plate
MATERIAL:
Spring: Phosphor Bronze
Body: Brass, Nickel Plate
Supplied with screw and lug
Unassembled
.135 [3.5] DIA.
.250 [6.4]
DIA.
L
A
.175 [4.5]
.187 [4.8]
.098 [2.49] DIA.
x .093 [2.36]
DEEP
A
H
D
THREAD
A
H
L
D
THREAD
.175 (4.5)
Plug
Supplied with nut and lug
Unassembled
EXTERNAL THREAD
CAT. NO. DA H LTHREAD
6074-1 .175 .531 1.125 .375 6-32
(4.5) (13.5) (28.6) (9.5)
6074-2 .175 .531 1.500 .750 6-32
(4.5) (13.5) (38.1) (19.1)
6075 .300 .750 1.750 .625 1/4-28
(7.5) (19.1) (44.5) (15.9)
CAT.
NO. L A SPRING
552-3 .187 (4.7).437 (11.1) 4 leaf
658 .187 (4.7) .550 (14.0) barrel
552-4 .218 (5.5).437 (11.1) 4 leaf
CAT.
NO. D A H THREAD SPRING
6072 .175 (4.4) .531 (13.5) .960 (24.4) 6-32 4 leaf
659*.175 (4.4) .550 (14.0) .960 (24.4) 6-32 barrel
6073 .218 (5.5) .437 (11.1) 1.120 (28.4) 10-32 4 leaf
107
BANANA JACKS
MINIATURE PLUGS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
BANANA PLUGS & JACKS
MATERIAL:
Spring: Beryllium Copper
Body: Brass, Silver Plate
MATERIAL:
Spring: Beryllium
Copper, Nickel Plate
Body: Brass,
Silver Plate
CAT. NO. 452 CAT. NO. 450
MATERIAL:
Spring: Beryllium Copper, Nickel Plate
Body: Brass, Nickel Plate
Handle: Nylon
.120 (3.0)
Plug
.120 (3.0)
Plug
.603 [15.3]
.153 [3.9]
DIA.
.187 [4.8] DIA.
.110 [2.8] .094 [2.39]
.078 [1.98] DIA.
.120 [3.1] DIA.
.290 [7.4]
2-56 THREAD
.120 [3.0] DIA.
.110 [2.8]
.276 [7.0]
.287 [7.3]
.187 [4.7]
.050 [1.27] DIA.
TO ACCEPT
WIRE.
.190 [4.9] DIA.
.104 [2.7] DIA.
.440 [11.2]
.480 [12.2]
.120 [3.1] DIA.
.290 [7.4]
CAT.
NO. COLOR
6076 RED
6077 BLACK
451 NONE
SOLDER CONNECTIONSWAGE MOUNT THREADED
MATERIAL:
Body: Brass, Nickel Plate
Terminal: Copper, Tinned
Accepts
.120 (3.0)
Plug
.550
[14.0]
.062 [1.57]
.312 [7.9]
HEX.
.250 [6.4]
.106 [2.7]
DIA. THRU
10-32 THREAD
NUT
TERMINAL
MATERIAL:
Body: Brass, Nickel Plate
Terminal: Copper, Tinned
Hex Head: Phenolic
MATERIAL:
Current Rating: 15 Amps
Body: Brass, Nickel Plate
Terminal: Brass, Tin Plate
MATERIAL:
Brass, Tin Plate
MATERIAL:
Body: Nylon
Contact: Brass, Tin Plate CAT. NO. 6096
MATERIAL:
Brass, Nickel Plate
CAT. HEAD
NO. COLOR
6093 RED
6094 BLACK
CAT.
NO. COLOR
6091 RED
6092 BLACK
CAT. NO. 6095
STANDARD
FULLY INSULATED
Fits panel up to .375 (9.6)
CAT.
NO. L
575-4 .218 (5.5)
575-6 .265 (6.7)
575-8 .350 (8.9)
CAT.
NO. L
476-2 .125 (3.2)
476-3 .165 (4.2)
476-4 .187 (4.7 )
Accepts
.120 (3.0)
Plug
Accepts
.175 (4.5)
Plug
Fits panel up to .312 (7.9)
Accepts
.175 (4.5)
Plug
MATERIAL:
Current Rating: 15 Amps
Body: Brass, Nickel Plate
Terminal: Brass, Tin Plate
Accepts
.175 (4.5)
Plug
Accepts
.175 (4.5)
Plug
NON-INSULATED MINIATURE JACK
MINIATURE
INSULATED SOLDER CONNECTION
CAT. NO. 6090
.562 [14.3]
.500 [12.7]
.437 [11.1]
.156 [4.0]
.163 [4.2]
DIA. THRU
.250-28 THREAD NUT
TERMINAL
MOLDED
HEX HEAD
FLAT WASHER
SHOULDER
WASHER
.375 [9.5]
.406 [10.3]
.093
[2.36]
.163 [4.2] DIA.
THRU
.250-32 THREAD
TERMINAL
NUT
.312
[7.9]
.500 [12.7]
.375 [9.5]
NUT
.125
[3.2]
TERMINAL
NUT
.250-32 THREAD
.163 [4.2] DIA.
THRU
.135 [3.5]
DIA.
L
.075 [1.91]
.218 [5.6]
DIA.
.106 [2.7] DIA.
THRU
.203 [5.2]
DIA.
.093 [2.36]
.312 [7.9]
DIA.
.163 [4.2] DIA.
THRU
L
.182 [4.6]
.937
[23.8]
.433 [11.0]
DIA.
.187 [4.8]
.234 [6.0]
.468 [11.9]
.093 [2.36]
DIA.
.312-32
THREAD
NUT
Supplied with hardware
Unassembled
Supplied with nut and lug.
Unassembled
Supplied with lug and nut.
Unassembled
Supplied with nut and lug.
Unassembled
NON-INSULATED
Accepts
.175 (4.5)
Plug
NON-INSULATED STANDARD HEAD
NON-INSULATED RECESSED HEAD
BINDING POSTS
All Keystone binding posts are designed to prevent accidental contact with current
carrying parts. They feature a “limited opening” captivated head to insure safety.
Ideal for audio circuitry, R.F. circuitry, oscilloscopes, power supplies and various
other applications.
MATERIAL:
Stud: Brass per QQ-B-626
Plating: Nickel Plate
Insulation: Nylon
Current Rating: 15 Amps, 1000V AC Working
These multi-purpose binding posts feature high current rating, captivated heads and
anti-rotation stud mounting.
Note: Binding Posts accept .175” (4.5) Banana Plugs, .080” (2.08) Tip Plugs, Spade
Lugs, Alligator Clips, Wires and EZ hooks.
MATERIAL:
Stud: Brass per QQ-B-626
Plating: Silver Plate
Insulation: Nylon
Current Rating: 15 Amps
Stud to Panel Capacitance: 3.3 pF Nominal
.250 [6.4]
.328 [8.4]
DIA.
Mounting Detail
CAT. NO. COLOR
7006 RED
7007 BLACK
For panels up
to .281 (7.1) thick
For panels up
to .313 (8.0) thick
MATERIAL:
Stud: Brass per ASTM B-16.
Insulation: Nylon
Current Rating: 30 Amps,
1000V AC Working
.500 [12.7]
DIA.
.468 [11.9]
Mounting Detail
Mounting Detail
MATERIAL:
Stud: Brass per ASTM B-16.
Insulation: Nylon
Current Rating: 30 Amps,
1000V AC Working
STANDARD BINDING POST UNINSULATED BINDING POST
STANDARD DUAL HEX HEAD STANDARD HEX HEAD
.423 [10.8]
DIA.
6-32 THREAD
.086 [2.18]
DIA.
.437 [11.1]
.719 [18.3]
.203 [5.2]
MAX.
.203 [5.2]
MAX.
.719 [18.3]
.828 [21.1]
.086 [2.18]
DIA.
.234 [6.0]
.312-32 THREAD
4-40 THREAD
.423 [10.8]
DIA.
.656 [16.7]
1.380 [35.1]
.625 [15.9]
.750 [19.1]
.920 [23.4]
MAX.
.093 [2.36]
DIA.
(2) PLS
.480 [12.2]
HEX.
THREAD
THREAD
.480 [12.2]
HEX.
.093 [2.36]
DIA.
.920 [23.4]
MAX.
.625 [15.9]
CAT. NO. COLOR
7004 RED
7005 BLACK
NICKEL PLATE
CAT.
NO. THREAD COLOR
4091 8-32 RED
4092 8-32 BLACK
4093 10-32 RED
4094 10-32 BLACK
4198 10-32 WH ITE
4199 10-32 YELLOW
GOLD PLATE
CAT.
NO. THREAD COLOR
4096 8-32 RED
4097 8-32 BLACK
7016 10-32 RED
7017 10-32 BLACK
7023 10-32 WH ITE
7024 10-32 YELLOW
GOLD PLATE
CAT.
NO. THREAD
4108 8-32
4109 10-32
NICKEL PLATE
CAT.
NO. THREAD
7018 8-32
7019 10-32
.750 [19.1]
.500 [12.7] DIA.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
AUDIO JACKS & BINDING POSTS
108
SURFACE MOUNT AUDIO JACKS
CAT. NO. 982TR (Mono) Tape Spec’s: 24mm wide; 16mm pitch
Reel Spec’s: 15 inch reel (800 pieces per reel)
.354 [9.0]
.472 [12.0]
.295
[7.5]
.059 [1.50]
(5) PLS
.110 [2.8]
.217
[5.5]
.157 [4.0] .079 [2.01]
.473
[12.0]
.158 [4.0]
.020 [0.51]
.039 [0.99]
.102 [2.6]
I. DIA.
.157
[4.0]
5
4
1
3
2
.294
[7.5]
.532
[13.5]
.079 [2.01]
.088 [2.24]
(3) PLS
.197 [5.0]
.157 [4.0]
.295
[7.5]
(TOP VIEW)
.067 [1.70]
.110 [2.8]
.265 [6.8]
.180 [4.6]
.063 [1.60]
DIA. (2) PLS
.118 [3.0]
45
12
Pad Layout
.197 [5.0]
.590
[15.0]
.118 [3.0]
.039 [1.0]
2
3
1
4
5
.059
[1.50] (2) PLS
.374 [9.5]
.110 [2.8]
.197 [5.0]
.354
[9.0]
.240
[6.1]
.039 [0.99]
.193
[4.9] .366
[9.3]
.472 [12.0]
.059 [1.5]
(3) PLS
.142 [3.6]
I. DIA.
.314
[8.0]
.532
[13.5]
.100 [2.6]
(2) PLS
.079 [2.01]
(3) PLS
21
.110 [2.8]
.240 [6.1]
.354 [9.0]
.236 [6.0]
4
.366 [9.3]
.193 [4.9]
5
(TOP VIEW)
.063 [1.60]
DIA. (2) PLS
.118 [3.00]
Pad Layout
4
5
3
2
1
4
5
1
STEREO
SCHEMATIC
MONO
SCHEMATIC
SPECIFICATIONS
Housing:Polyamide, UL Rated 94V-0
Ground Terminal: .012 (.30) Brass, Gold Flash ➀
Spring Contacts: .008 (.20) Phosphor Bronze,
Gold Flash ➁ ➄
Shunt Terminals: .012 (.30) Brass, Gold flash ➂ ➃
•
Mates with 2.5mm and 3.5mm plugs
•
Designed for reliable interface with audio equipment
including computer speakers, headphones, sound
cards, cell phones, etc.
•
Models available for mono and stereo applications
•
Low profile, surface mount design
CAT. NO. 980TR (Stereo)
FOR 2.5 mm PLUGS FOR 3.5 mm PLUGS
Tape Spec’s: 24mm wide; 16mm pitch
Reel Spec’s: 15 inch reel (1,000 pieces per reel)
SUPPLIED ON TAPE AND REEL
CAT. NO. 981TR (Stereo)
CAT. NO. 983TR (Mono)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
TRANSISTOR MICA INSULATORS & MOUNTING KITS
TRANSISTOR INSULATORS
TRANSISTOR MOUNTING KITS
These precision stamped mica insulators provide good thermal conductivity:
.009 watts per square inch per degree celsius per inch in thickness.
Excellent thermal resistance 1100°F. (593°C) Dielectric constant of 7 at 1000 KHz.
FOR TO-3 CASEFOR TO-220 CASE
•
Complete Kits or Individulal Hardware
•
Pre-Packaged
•
Uniform Hardware at Low Cost
These pre-packaged universal mounting kits provide
all the necessary hardware and insulators required
to securely mount the semiconductor to the chassis.
Purchase the complete kit consisting of all hardware
included in one package. Your choice of individual
items available in 100 piece packages. Semicon-
ductors customer supplied.
CAT. NO. 4725 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QTY.
A4696 6-32 Screw 2
B4651 Mica Insulator 1
C4698 Shoulder Washer 2
D4699 Metal Washer 2
E4004 Solder Terminal 1
F4700 Lockwasher 2
G4701 6-32 Nut 2
CAT. NO. 4724 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QTY.
A4690 4-40 Screw 1
B4672 Mica Insulator 1
C3049 Shoulder Washer 1
E4693 Lockwasher 1
G4694 4-40 Nut 1
FOR TO-66 CASE
•
Rapid Heat Dissipation
•
High Dielectric Strength
•
Low Cost
CAT. ID OD For Screw
NO. Inside Dia. Outside Dia. Size
4678 .120 (3.1) .375 (9.5) 4
4679 .144 (3.7) .375 (9.5) 6
4680 .171 (4.3) .500 (12.7) 8
4681 .196 (5.0) .625 (15.9) 10
4682 .260 (6.6) .750 (19.0) 1/4
4683 .328 (8.3) .875 (22.2) 5/16
CAT. NO. ABCD
4651 1.625 (41.3) 1.093 (27.8) .093 (2.36) .166 (4.2)
4652 1.560 (39.6) 1.050 (26.7) .203 (5.15) .171 (4.4)
4653 1.655 (42.1) 1.063 (27.0) .166 (4.2) .166 (4.2)
4636 1.655 (42.1) 1.063 (27.0) .052 (1.32) .166 (4.2)
4644 1.655 (42.1) 1.063 (27.0) .270 (6.9) .166 (4.2)
1.375 [34.9]
.960 [24.4]
.200 [5.1]
.380 [9.7]
.780
[19.8]
.156 [4.0] DIA.
(2) PLS
.045 [1.14] DIA.
(2) PLS
1.500 [38.1]
.960 [24.4]
.750
[19.1]
.380 [9.7]
.166 [4.2] DIA.
(2) PLS
.200 [5.1]
.080 [2.03] DIA.
(2) PLS
1.594 [40.5]
1.187 [30.2]
.430 [10.9]
.521 [13.3]
1.141
[29.0]
.142 [3.6] DIA.
(2) PLS
.059 [1.50] W. x
.086 [2.18] H. .055 [1.40]
DIA.
.515 [13.1]
.440 [11.2]
.750 [19.1]
1.000 [25.4]
.600 [15.3]
.140 [3.6] DIA.
(2) PLS
.580 [14.8]
.072 [1.9]
.200 [5.1]
.800 [20.3]
.505 [12.9]
.065 [1.65] DIA.
(2) PLS
.141 [3.6]
DIA.
1.655 [42.1]
1.187 [30.2]
.521 [13.2]
1.063
[27.0]
.166 [4.2] DIA.
(4) PLS
.026 [0.66]
.105 [2.7]
.072 [1.9]
.580 [14.8]
.072 [1.9]
.860 [21.9]
.520 [13.2]
.065 [1.65] DIA.
(2) PLS
A DIA.
.430 [10.9]
.521 [13.3]
1.187 [30.2]
1.562 [39.7]
1.062
[27.0]
.156 [4.0] DIA
.
(2) PLS
.125 [3.2] DIA.
(2) PLS
B
.521 [13.3]
.430 [10.9]
1.187 [30.2]
A
(2) PLS
(2) PLS
C DIA. D DIA.
I.D.
O.D.
CAT. NO. A
4672 .141 (3.6)
4673 .115 (2.9)
FOR TO-3 CASES
FOR PLASTIC CASE
FOR THREADED STUD TRANSISTORS
FOR TO-3 CASES FOR TO-66 CASES
A
G
E
C
NOT SUPPLIED
CHASSIS
B
NOT SUPPLIED
B
CHASSIS
A
D
E
F
G
C
C
NOT SUPPLIED
CHASSIS
A
B
E
D
CAT. NO. 4726 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QTY.
A4696 6-32 Screw 2
B4666 Mica Insulator 1
C4698 Shoulder Washer 2
D4699 Metal Washer 2
E4004 Solder Terminal 1
F4700 Lockwasher 2
G4701 6-32 Nut 2
MATERIAL: .003 (.08) ± .001 (.02) Thick Mica
CAT. NO. 4664 CAT. NO. 4666
CAT. NO. 4661CAT. NO. 4667CAT. NO. 4662
CAT. NO. 4663 CAT. NO. 4671
FOR DO-4, TO-59, TO-60, TO-62 CASES
CAT. NO. 4729 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QTY.
A4681 Mica Insulator 1
B4702 Shoulder Washer 1
C4704 Solder Terminal 1
D1477 Lockwasher 1
E4705 10-32 Nut 1
FOR DO-5, TO-48, TO-61 CASES
CAT. NO. 4730 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QTY.
A4682 Mica Insulator 1
B4711 Shoulder Washer 1
C4712 Solder Terminal 1
D1476 Lockwasher 1
E4713 1/4-28 Nut 1
109
TRANSISTOR SOCKETS & ACCESSORIES
110
SOCKETS FOR T0-5 & TO-100 “MINI” HALOGEN LAMP SOCKETS
CAT. NO. 4617
MATERIAL:
Insulator: Glass Filled Polyester,
UL Rated 94V-0
Contact Pin: Brass, Tin-Lead Plate
(Non-RoHS Compliant)
Contact Spring: Beryllium Copper,
.000030 min. Gold Plate
Molded barrier insulators functionally replaces up to six pieces of conventional insulation
required with previous methods of mounting power transistors. Built-in barrier eliminates
need for sleeving of connections.
NOTE: #6-20 mounting screw available CAT. NO. 4706
Molded nylon covers easily mount over and insulate the power transistor. Will
withstand temperatures to approximately 250°F (107°C).
EYELETS
CAT. NO. FOR INSTALLED A
4632 TO-3 NONE .210 (5.4)
4634 TO-3 TWO .140 (3.6)
•Accepts .022 (.032) to .032 (.81) diameter Pins or Leads
•The Wire Wrap Pins can be easily bent to achieve a variety of positions
Fully molded compact construction. Speeds transistor as-
sembly. Incorporates ultra high quality, closed entry, sleeve
type contacts. Accepts .016 (.41) to .020 (.51) diameter
leads or .010 (.25) .018 (.46) rectangular transistor leads.
.160 [4.1]
.470 [12.0]
.130 [3.3]
.170 [4.3]
.025 [.64] SQUARE
WIRE WRAP PIN
.302
[7.7] .812
[20.6]
.030 [.76]
CAT. NO. 4595 CAT. NO. 4596
SPECIFICATIONS
Base:Glass Filled LCP; Contact: Beryllium Copper, Gold Plate; Shell: Brass, Nickel Plate
MATERIAL:
Top Plate: Molded Nylon
Base: Phenolic
Contacts: Brass, Tin Plate
Collector Plate: Steel, Tin Plate
TO-3 SOCKET FOR PC BOARDS
CAT. NO. 4600
.110
[2.8]
.021 [.53]
DIA.
.126
[3.2]
.165
[4.2]
.032 [.81]
DIA. THRU
.146 [3.7]
MAX.
PIN DEPTH
.200 [5.1]
.394 [10.0]
45°
.394 [10.0]
.200 [5.1]
45°
36°
.230 [5.9]
.394 [10.0]
.230 [5.9]
.394 [10.0]
45°
.394 [10.0]
.200 [5.1]
45°
CAT. NO. FOR PINS
4590 TO-5 3
4591 TO-5 4
4592 TO-5 8
4593 TO-100 8
4594 TO-100 10
Cat. No. 4590 Cat. No. 4591 Cat. No. 4592
Cat. No. 4593 Cat. No. 4594
.215 [5.5]
.665 [16.9]
.430 [10.9]
1.188 [30.2]
B
.156 [4.0]
(2) PLS
.100 [2.6] DIA.
.218 [5.6]
DIA. (2) PLS
E
.070 [1.78]
DIA. (4) PLS
Bottom View Mounting Detail
.210 [5.4]
.015 [.38]
.170 [4.3]
.470 [12.0]
.160 [4.1]
.130 [3.3]
THRU-HOLE
.073 [1.85]
DIA.
.425
[10.8]
1.562 [39.7] REF.
.562 [14.3]
.062
[1.57]
.375 [9.6]
.665 [16.9]
1.188 [30.2]
.187 [4.8]
DIA. (2) PLS
.112 [2.9] DIA.
(2) PLS
.140 [3.6]
I. DIA.
(2) PLS
.375 [9.6] DIA.
(2) PLS
.050 [1.27] I. DIA.
(2) PLS
.194
[5.0]
1.272 [32.3] REF.
.312 [7.9]
.312 [7.9]
.580
[14.8]
.960 [24.4]
.187 [4.8]
DIA. (2) PLS
.112 [2.9] DIA.
(2) PLS .062
[1.57]
.312 [7.9] DIA.
(2) PLS
.140 [3.6]
I. DIA.
(2) PLS
.050 [1.27] I. DIA.
(2) PLS
.425
[10.8]
1.562 [39.7] REF.
.508 [12.9]
.387 [9.9]
.665 [16.9]
1.188 [30.2]
.062
[1.57]
.112 [2.9] DIA.
(2) PLS
.187 [4.8]
DIA. (2) PLS
.070 [1.78] I. DIA.
(2) PLS
.140 [3.6]
I. DIA. (2) PLS
.537 [13.7]
REF.
1.125 [28.6]
.452 [11.5]
.475 [12.1]
1.610 [40.9]
.234 [6.0]
.062 [1.57]
1.170 [29.7]
.840 [21.4]
DIA.
.920 [23.4]
DIA.
.125 [3.2] DIA.
A
POWER TRANSISTOR MOUNTS
NYLON TO-3 CASE COVERS
CAT. NO. 4616
CAT. NO. 4626
.204
[5.2]
DIA.
1.530 [38.9]
.090
[2.29]
.430
[10.9]
.730
[18.6]
1.188 [30.2]
.665 [16.9]
FORMED THREAD
FOR #6-20 SCREW
(TYPE B) (2) PLS
.064 [1.63] DIA.
(2) PLS
.460
[11.7]
REF.
Easily assembles onto printed circuit board. Elimi-
nates wiring. Stops on PC terminals provide suffi-
cient spacing between socket and PC board to
permit proper assembly of transistor to socket. Can
be screwed down tightly to heat sink.
MATERIAL: Nylon 6/6, UL Rated 94V-2
MATERIAL: Glass filled Polyester,
UL Rated 94V-0
MATERIAL: Nylon 6/6, UL Rated 94V-2
MATERIAL: Nylon 6/6, UL Rated 94V-2
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
For TO-66 CASES
For TO-3 CASES
HEAVY DUTY TO-3
RoHS
TO-3 POWER TRANSISTOR SOCKET & MOUNTING KITS
111
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SOCKETS FOR TO-3 CASE
Socket and transistor are assembled to chassis at same time, using the minimum
amount of hardware. Top molded boss ensure the transistor leads will be isolated from
the chassis. Various boss heights available to accommodate different
chassis thicknesses.
Socket is installed onto chassis using eyelets or screws. Transistor is installed af-
terwards. Assembly and repairs are simplified since socket will stay in place with-
out transistor mounted. Top molded boss or added bushing ensure the
transistor leads will be isolated from the chassis. Various boss heights available to
accommodate standard chassis thicknesses. Use Cat. No. 4606 and nylon bush-
ings for special chassis thicknesses.
CAT. NO. A DIM.
4603 .030 (.76)
4602 .045 (1.14)
4601 .090 (2.29)
VARIOUS MOLDED BOSS HEIGHTS
CAT. NO. A DIM.
4606 NONE
4607 .030 (.76)
4608 .045 (1.14)
4609 .060 (1.52)
4618 .125 (3.2)
.204
[5.2]
DIA.
1.530 [38.9]
.460
[11.7]
REF.
.430
[10.9]
.730
[18.6]
1.188 [30.2]
.665 [16.9]
FORMED THREAD
FOR #6-20 SCREW
(TYPE B) (2) PLS
.064 [1.63] DIA.
(2) PLS
A
.460
[11.7]
REF.
B
E
1.188 [30.2]
.521 [13.3]
.430 [11.0]
.695
[17.7]
1.000
[25.4]
.180
[4.6]
1.090 [27.7]
1.350 [34.3]
.144 [3.7]
DIA. (2) PLS
FORMED THREAD
FOR #6-20 SCREW
(TYPE B) (2) PLS
A
.220
[5.6]
DIA.
MATERIAL:
Base: Phenolic, Grade PBE, Type XP
Contacts: Brass, Tin Plate
Top Plate: Nylon, ASTM-D4066
Phenolic, Grade PBE, Type XP
(Cat. No. 4606 only)
Collector Plate: Steel, Tin Plate
FULLY MOLDED TO-3 SOCKET
CAT. NO. 4620
MATERIAL:
Base: Molded Nylon 6/6
Contacts: Brass, Tin Plate
Collector Plate: Steel, Tin Plate
Pre-assembling the socket to the chassis by eyelets or rivets permits
the installation of the semiconductor at a later stage in the assembly.
The molded top boss eliminates hardware.
.261 [6.7] DIA.
.640 [16.3]
.515 [13.1]
.344 [8.8]
.140 [3.6]
.050 [1.3]
.136 [3.5]
DIA. (4) PLS
FORMED THREAD
FOR #6-20 SCREW
(TYPE B) (2) PLS
.221 [5.6]
.430 [10.9] 1.226 [31.2]
.931
[23.7]
.521 [13.3]
1.188 [30.2]
1.250
[31.8]
1.500 [38.1]
.430 [10.9]
B
E
HEAVY DUTY SOCKET FOR TO-3 CASE
Features an all-in-one mounting plate and solder tabs, providing
complete electrical isolation of the solder tab connections.
Rated 5 Amps DC continuous and 15 Amps DC Intermittent
With transistor lead-in in-
sulating shoulders
CAT. NO. WITH TAB
4513 “A” O NLY
4514 “A” & “B”
CAT. NO. WITH TAB
4515 “A” O NLY
4516 “A” & “B”
Less transistor lead-in in-
sulating shoulders
CHOICE OF SINGLE OR DUAL COLLECTOR SOLDER TABS
MATERIAL:
Base: Glass Filled Polyester, UL Rated 94V-0
Contacts: Brass, Tin Plate
Collector Plate: Brass, Tin Plate
TAB 'A' TAB 'B'
(2) INSULATING
SHOULDERS .060 [1.52]
.210
[5.4]
DIA.
.028
[0.71]
.218 [5.6] DIA.
6-32 THREAD
(2) PLS
.700 [17.8]
MAX.
.125 [3.2] DIA. x .250 [6.4] C'BORE
.045 [1.14] DEEP
.730 [18.6]
REF.
.665 [16.9]
.450 [11.5]
1.187 [30.2]
1.600 [40.7] MAX.
.325 [8.3]
TO-3 CASE MOUNTING KITS
CAT. NO. 4733 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QUANTITY
A4706 6-20 screws 2
B4651 Mica Insulator 1
C4608 Square Socket 1
CAT. NO. 4732 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QUANTITY
A4706 6-20 screws 2
B4651 Mica Insulator 1
C4602 Socket 1
CAT. NO. 4734 Complete Mounting Kit
ITEM CAT. NO. DESCRIPTION QUANTITY
A4706 6-20 screws 2
B4651 Mica Insulator 1
C4684 Nylon Bushing 4
D4606 Square Socket 1
These socket kits provide everything
needed to mount a transistor onto
a chassis in one kit. Nylon bushings
or boss will insulate transistor
leads from chassis. Mica insulator
isolates transistor from chassis. Two
6-20 screws included to mount
transistor. (Transistor not included)
PC BOARD HARDWARE
We offer an assortment of standard blank and cutout computer
brackets, PCB support brackets, card edge ejectors and guides to
provide the right solution for applications such as:
•Computer Chassis Assembly
•Electronic Peripheral Equipment
•Rack Mounted Equipment
•Printed Circuit Board Mounting
•Printed Circuit Board Supports
•Printed Circuit Board insertion and removal
•To dress up chassis access panels
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application..
PC BOARD HARDWARE
113
COMPUTER BRACKETS . . . . . . . . . . . . 118-121
COMPUTER BRACKET WORKSHEET. . . . . . . 122
CONTACT PINS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
MOUNTING BRACKETS . . . . . . . . . . . . . . . . 114-115
PC BOARD ACCESSORIES
Board Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . 116-117
Card Ejectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
IC Static Tray Clips . . . . . . . . . . . . . . . . . . . . . . . . . . 116
PUSH-IN TERMINALS . . . . . . . . . . . . . . . . . . . . . . 123
SECTION CONTENTS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
THREADED MOUNTING BRACKETS
114
MATERIAL:
.062 (1.57) Steel, Zinc Plate
4-40 THREAD 4-40 THREAD
6-32 THREAD
.250
[6.4]
.343
[8.7] .203
[5.2]
.250 [6.4]
.375 [9.5]
4-40
THREAD
.062 [1.57] .130 [3.3] DIA.
.187 [4.8]
.265
[6.8]
.453
[11.5]
.312 [7.9]
.250
[6.4]
.047 [1.19] .136 [3.5] DIA.
4-40
THREAD
4-40 THREAD
6-32 THREAD
.343
[8.7] .203
[5.2]
4-40
THREAD
.375 [9.5]
.250 [6.4]
.250
[6.4]
.062 [1.57]
.165 [4.2]
.250 [6.4]
.312 [7.9]
.420
[10.7]
.343 [8.7]
.032 [.81] .144 [3.7] DIA.
6-32
THREAD
.375 [9.5]
.312
[7.9]
.281
[7.2]
.437 [11.1]
.218 [5.6]
.781
[19.9]
.136 [3.5]
DIA.
(2) PLS
.037 [.94]
8-32
THREAD
6-32 THREAD
.390 [9.9]
.218 [5.6]
.625
[15.9]
.437
[11.1]
.312 [7.9]
1.230
[31.3]
.062 [1.57]
.130 [3.3]
DIA.
(2) PLS
6-32
THREAD
.312 [7.9]
.234 [6.0]
.422 [10.7]
.250 [6.4]
.375
[9.5]
.037 [.94] .135 [3.5] DIA.
8-32
THREAD
8-32 THREAD
CAT. NO. 612 CAT. NO. 621 CAT. NO. 616
CAT. NO. 634 CAT. NO. 614
CAT. NO. 4334 CAT. NO. 708 CAT. NO. 617
CAT. NO. 611 CAT. NO. 631
MATERIAL:
.062 (1.57) Steel, Zinc Plate
MATERIAL:
.047 (1.19) Brass, Tin Plate
MATERIAL:
.032 (.81) Brass, Tin Plate
MATERIAL:
.032 (.81) Brass, Nickel Plate
MATERIAL:
.062 (1.57) Steel, Nickel Plate
MATERIAL:
.062 (1.57 Steel, Nickel Plate
MATERIAL:
.062 (1.57) Steel, Tin Plate
MATERIAL:
.062 (1.57) Brass, Nickel Plate
MATERIAL:
.037 (.94) Brass, Tin Plate
MATERIAL:
.037 (.94) Steel, Tin Plate
6-32 THREAD
.281 [7.2]
.218 [5.6]
.218 [5.6]
.375
[9.5]
.375 [9.5]
.032 [.81] .140 [3.6] DIA.
6-32
THREAD
.500 [12.7].412 [10.5]
.412
[10.5]
.562
[14.3]
.562 [14.3]
6-32
THREAD
.062 [1.57]
.500 [12.7].299 [7.6]
.328
[8.4]
.578
[14.7]
.500 [12.7]
.062 [1.57] .165 [4.2] DIA.
6-32
THREAD
.187 [4.8]
.218
[5.6]
.312 [7.9]
.531
[13.5]
.500 [12.7]
THREAD
.062 [1.57]
.156 [4.0] DIA.
.218 [5.6] RADIUS
6-32 THREAD 6-32 THREAD
6-32 OR 8-32 THREAD 8-32 THREAD
CAT. NO. THREAD
4332 6-32
4333 8-32
THREADED MOUNTING BRACKETS
.100 [2.5]
6-32 THREAD
.379 [9.6]
.300
[7.6]
.340 [8.6]
.200 [5.1]
.200
[5.1]
.120 [3.1]
CAT. NO. 632 MATERIAL:
.032 (.81) Brass, Tin Plate
CAT. D HOLE E HOLE T
NO. H L W D DIAMETER E DIAMETER MATERIAL FINISH
633 .375 (9.5) .375 (9.5) .281 (7.1) .218 (5.5) .140 (3.6) .218 (5.5) .140 (3.6) .032 (.81) Brass Nickel
613 .390 (9.9) .453 (11.5) .375 (9.5) .234 (5.9) .147 (3.7) .299 (7.6) .128 (3.3) .032 (.81) Brass Nickel
615 .420 (10.7) .343 (8.7) .281 (7.1) .281 (7.1) .144 (3.7) .203 (5.2) .128 (3.3) .032 (.81) Brass Tin
4335 .562 (14.3) .562 (14.3) .500 (12.7) .412 (10.5) .120 (3.0) .411 (10.4) .120 (3.0) .062 (1.57) Steel Nickel
4336 .562 (14.3) .562 (14.3) .500 (12.7) .412 (10.5) .144 (3.7) .412 (10.5) .144 (3.7) .062 (1.57) Steel Nickel
618 .628 (16.0) .628 (16.0) .375 (9.5) .378 (9.6) .169 (4.3) .378 (9.6) .169 (4.3) .050 (1.27) Brass Tin
619 .687 (17.4) .687 (17.4) .375 (9.5) .500 (12.7) .144 (3.7) .500 (12.7) .144 (3.7) .032 (.81) Steel Tin
4326 1.013 (25.7) .487 (12.4) .312 (7.9) .816 (20.7) .140 (3.6) .332 (8.4) .140 (3.6) .050 (1.27) Steel Nickel
620 1.156 (29.4) .656 (16.7) .375 (9.5) .906 (23.0) .169 (4.3) .420 (10.7) .169 (4.3) .032 (.81) Steel Tin
BOARD BRACKETS
SNAP-IN THREADED PC MOUNT BRACKETS
Originally designed for our line of standardized terminal boards;
these brackets can also be used in other applications.
See pages 148-149 for Turret Terminal Boards.
MATERIALS: .062 (1.57) Steel, Nickel Plate
.500 [12.7]
S
W
.375
[9.5]
L
.156 [4.0] DIA.
(2) PLS
.218 [5.6]
.156 [4.0]
.203 [5.2]
633
615
4335
4336
4326
613
618
619
620
CAT. NO. 4325
CAT. NO. 1564
CAT. NO. 7774
UNIVERSAL CLEAR HOLE BRACKETS
.250 [6.4]
.177 [4.5]
DIA.
(3) PLS
1.562
[39.7]
.375
[9.5]
.625
[15.9]
.484 [12.3]
.250
[6.4]
.437 [11.1]
.562 [14.3] .187
[4.8]
DIA.
.187
[4.8]
.187 [4.8]
.130
[3.3]
DIA.
.500 [12.7]
.312
[7.9]
MOUNTING BRACKETS
115
MATERIAL: .050 (1.27) Steel, Nickel PlateMATERIAL: .062 (1.57) Steel, Nickel Plate
MATERIAL: .032 (.81) Brass, Tin Plate
CAT. NO. 7779
MATERIAL: .032 (.81) Brass, Tin Plate
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
SNAP-IN
PC MOUNT
.197 [5.0]
.512
[13.0]
.060 [1.52]
(4) PLS
.312
[7.9]
.200
[5.1]
.327
[8.3]
.295
[7.5]
6-32 THREAD
Mounting Detail
.073 [1.85] DIA.
(4) PLS
.295 [7.5]
.197 [5.0]
Mounting Detail
.200 [5.1]
.214 [5.5]
.067 [1.7] DIA.
(4) PLS
4-40 THREAD 6-32 THREAD
•Snaps in for wave soldering •Reduces assembly time •Easily mount into predrilled or punched holes •Stable no rock design
.200 [5.1]
.360 [9.2]
.050 [1.27]
(4) PLS
.180 [4.6]
.214 [5.5]
.250 [6.4]
4-40 THREAD
.125 [3.2]
For screw selection
refer to pages 79 and 123
CAT. NO. WL S
1570 .281 (7.1) 1.187 (30.1) .750 (19.1)
1556 .375 (9.5) 1.625 (41.3) 1.000 (25.4)
1571 .281 (7.1) 1.625 (41.3) 1.187 (30.1)
1567 .375 (9.5) 2.125 (54.0) 1.500 (38.1)
1568 .375 (9.5) 2.625 (66.7) 2.000 (50.8)
1569 .375 (9.5) 3.125 (79.4) 2.500 (63.5)
CAT. NO. 630 MATERIAL:.032 (.81) Brass, Tin Plate
.312 [7.9]
.437
[11.1]
.156 [4.0]
.312 [7.9] .281 [7.2]
.128 [3.3] DIA.
.156
[4.0]
.032
[0.8] 6-32
THREAD
CAT. NO. 4337
.530
[13.5]
.328 [8.4]
.203 [5.2]
.196 [5.0]
.560
[14.2]
.750
[19.1]
.750 [19.1]
.196 [5.0]
DIA.
MATERIAL: .080 (2.03) Aluminum
E
D
W
H
L
D HOLE
E HOLE
T
.375
[9.5]
1.100 [28.0]
.140 [3.6]
RADIUS
.390
[9.9]
.075
[1.90]
.250
[6.4]
.093
[2.36]
DIA.
.520
[13.2]
CAT.
NO. LAB
8620 2.5 (63.5) 2.0 (50.8) —
8621 3.0 (76.2) 2.5 (63.5) —
8622 3.5 (88.9) 3.0 (76.2) —
8623 4.0 (101.6) 3.5 (88.9) —
8624 4.5 (114.3) 4.0 (101.6) —
8625 5.0 (127.0) 4.5 (114.3) —
8626 5.5 (139.7) 5.0 (127.0) —
8627 6.0 (152.4) 5.5 (139.7) —
8628 6.5 (165.1) 6.0 (152.4) —
8629 7.0 (177.8) 6.5 (165.1) —
8630 7.0 (177.8) 6.5 (165.1) 3.25 (82.6)
8631 7.5 (190.5) 7.0 (177.8) —
8632 7.5 (190.5) 7.0 (177.8) 3.50 (88.9)
8633 8.0 (203.2) 7.5 (190.5) —
8634 8.0 (203.2) 7.5 (190.5) 3.75 (95.3)
8635 8.5 (215.9) 8.0 (203.2) —
8636 8.5 (215.9) 8.0 (203.2) 4.00 (101.6)
•Designed for .062 (1.57) PC cards.
•Level action ejectors aids card insertion and extraction.
•Supplied complete with stainless steel spring pin.
CARD MOUNTING DIMENSIONS
LEVER ACTION PC CARD EJECTORS
HORIZONTAL TYPE PC BOARD GUIDES
.109 [2.8] DIA.
MOUNTING
HOLE
.250 [6.4]
.250 [6.4]
PC CARD .250
[6.4]
.140 [3.6]
RADIUS
.093
[2.36]
DIA.
1.125 [28.6]
.450
[11.5]
.640
[16.3]
.075
[1.90]
.250
[6.4]
.375
[9.6]
CAT. NO. 8640 CAT. NO. 8641
CAT. NO. 8642
.075
[1.90]
.390
[9.9]
.640
[16.3]
.450
[11.5]
1.125 [28.6]
.093
[2.36]
DIA.
.140 [3.6]
RADIUS
.250
[6.4]
.600
[15.3]
.093
[2.36]
DIA.
.140 [3.6]
RADIUS
1.250 [31.8]
.075
[1.90]
.250
[6.4]
.290
[7.4]
.134
[3.4]
.260 [6.6]
.250
[6.4]
.140 [3.6]
RADIUS
.093
[2.36]
DIA.
.980 [24.9]
.375
[9.5]
.640
[16.3]
.390
[9.9]
.125
[3.2]
.075
[1.90]
Guides may be used horizontally or vertically and snap into .125 (3.2)
diameter holes. Narrow width allows maximum density and optimum airflow.
Simple press-fit, secure installation. No special tools required to install.
MATERIAL:
Natural Nylon 6/6, UL Rated 94V-2
B
.125 [3.2]
.250 [6.4]
.132 [3.4]
.078 [2.0]
.245 [6.2]
L
A
.085 [2.2]
.172 [4.4]
REF.
Mounting Detail
.218 [5.6]
(2) PLS
.120 [3.1]
(2) PLS
A
B
.125 [3.2] DIA.
MATERIAL:
White Nylon 6/6, UL Rated 94V-2
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PC BOARD ACCESSORIES
11 6
CAT. NO. 8643 CAT. NO. 8644
Card ejectors offer a simple and reliable way of
installing and ejecting circuit boards. Card ejectors
reduce the stress on board connectors by improper
removal of board. Ejectors also protect components
on board from damage during removal or installation.
Ejectors supplied with stainless steel pin to assure
quick assembly of ejector to card.
•Sturdy Nylon construction
•Mounts into chassis with out tools
•Assures proper alignment of board
•Quick and easy installation of board.
VERTICAL PC BOARD GUIDES
M3 MOUNTING SCREW
PC BOARD GUIDES
117
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Vertical board guides provide for a quick and easy assembly of
circuit boards. Sturdy design assures boards stay square. These
guards can be mounted to chassis or directly to a mother
board. Mounting holes have brass threaded inserts to assure
secure mounting of guide. After bracket is installed, boards are
quickly locked into place or released for repair or upgrades.
Locking pins at the top of the bracket can be set/released
using finger pressure, no tools are required.
•Brass threaded inserts assure sturdy connection to chassis
or mother board.
•Available for circuit boards 1.970” to 6.300” tall.
•Locking pin keeps circuit board locked into place.
•M3 mounting screws available.
•All brackets use same footprint, no redesign of mounting
holes required if changing bracket height.
•Pan head screw
•Available in four lengths to accommodate
most board thicknesses
•Flat washer available: P/N 4693
.118 [3.00]
.087 [2.20]
A
.072 [1.8]
H
.315 [8.0]
.473 [12.00]
A
M3 X 8
THREAD
(2) PLS.
.709 [18.0]
MATERIAL:
Guide: Nylon
Threaded Insert: Brass, Nickel plate
MATERIAL: Steel, Zinc plate
MATERIAL:
Guide: Polystyrene
Threaded Insert: Brass, Nickel plate
M3 THREAD
L
CAT. NO. L
29311 6.00
29314 12.00
29316 16.00
29318 25.00
A
H
.710 [18.0]
.072 [1.8]
M3 X 0.5
THREAD
(2) PLS.
.473 [12.00]
.315 [8.0]
CAT. H A LOCK
NO. HEIGHT PIN HEIGHT
8645 1.970 (50.0) 1.650 (42.0)
8646 2.560 (65.0) 2.250 (56.5)
8647 3.540 (90.0) 3.200 (81.5)
8648 4.725 (120.0) 4.430 (112.5)
CAT. H A LOCK
NO. HEIGHT PIN HEIGHT
8649 6.300 (160.0) 6.000 (152.0)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
COMPUTER BRACKETS
These computer brackets have been designed
to accommodate a large variety of board sizes and
heights. Available with tabs located properly for
ESA/EISA or PCI formats. Blanks can be machined or
stamped for prototype or low volume production. All
brackets are nickel plated for a clean look and a pro-
tective finish. Standard cut-outs can be added to
these blanks to suit your specific production needs.
See page 118-119 for standard cut-outs and design
worksheet.
•
Premium quality
•
Designed to fit all PC computers height
brackets available
•Blanks available for “fillers”
•Fast delivery and cost effective tooling for
special designs
STANDARD BLANK BRACKETS
MATERIAL: .032 (.81) Steel, Matte Nickel Plate.
EISA/ISA or PCI
EISA/ISA
PCI
CAT. NO. 9200 CAT. NO. 9201
CAT. NO. 9203
CAT. NO. 9202
CAT. NO. 9204
4-40 THREAD
(2) PLS
(2) PLS
3.362 [85.4]
4.725 [120.0]
4.440 [112.8]
4.213 [107.0]
.725
.187 [4.8] DIA.
.398 [10.1]
.250 [6.4]
.401
[10.2]
[18.4]
.343 [8.7]
.467 [11.9]
.310 [7.9]
.450
[11.5]
.174
[4.4]
.125
[3.2]
.250 [6.4]
.750
[19.1]
.100
[2.6]
.330
[8.4]
.120
[3.1]
4-40 THREAD
.187 [4.8] DIA.
.725
[18.4]
.401
[10.2]
4.440 [112.8]
4.725 [120.0]
4.213 [107.0]
.295 [7.5]
.240 [6.1]
.177 [4.5]
.609 [15.5]
.250 [6.4]
.330
[8.4]
.750
[19.1]
.100
[2.6]
.450
[11.5]
.174
[4.4]
.125
[3.2]
.250 [6.4] .120
[3.1]
.174
[4.4]
.250 [6.4]
.450
[11.5]
.330
[8.4]
.120
[3.1]
.750
[19.1]
.125
[3.2]
.100
[2.6]
4.213 [107.0]
.725
[18.4]
.401
[10.2]
.187 [4.8] DIA.
4.440 [112.8]
4.725 [120.0]
.174
[4.4]
4.440 [112.8]
4.725 [120.0]
4.130 [104.9]
4.213 [107.0]
4.362 [110.8]
.187 [4.8] DIA.
.125
[3.2]
.450
[11.5]
.120
[3.1]
.250 [6.4]
.330
[8.4]
.100
[2.6]
.750
[19.1]
.725
[18.4]
.642
[16.3]
.401
[10.2]
P/N 9201
(2) PLS
4-40 THREAD
(2) PLS
4.440 [112.8]
4.725 [120.0]
4.213 [107.0]
2.225 [56.5]
.187 [4.8] DIA.
1.250 [31.8]
.350 [8.9]
.210 [5.4]
.240 [6.1]
.740
[18.8]
.317
[8.1] .450
[11.5]
.125
[3.2]
.174
[4.4]
.250 [6.4]
.120
[3.1]
.110
[2.8]
.720
[18.3]
.401
[10.2]
•Reinforced with rib for extra strength
11 8
STANDARD BLANK BRACKETS
LOW PROFILE BLANK BRACKETS
(2) PLS
4-40 THREAD
.120
[3.1]
3.429 [87.1]
.229 [5.8]
.250 [6.4]
3.500 [88.9]
4.440 [112.8]
4.213 [107.0]
4.725 [120.0]
.395 [10.1]
(2) PLS
.330 [8.4]
.305 [7.8]
(2) PLS
.315 [8.0] .315 [8.0]
.100
[2.6]
.791 [20.1]
.327
[8.3]
.750
[19.1]
.450
[11.5]
.187 [4.8] DIA.
.401
[10.2]
.725
[18.4]
.125 [3.2]
.174
[4.4]
.250 [6.4]
EISA/ISA
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
CAT. NO. 9205 CAT. NO. 9206
CAT. NO. 9207 CAT. NO. 9208
CAT. NO. 9230 CAT. NO. 9231
4-40 THREAD
(2) PLS
.490 [12.5]
3.504 [89.0]
3.575 [90.8]
.791
[20.1]
4.440 [112.8]
4.213 [107.0]
4.725 [120.0]
.740
[18.8]
.450 [11.5]
.125
[3.2]
.850
[21.6]
.453 [11.5]
.547 [13.9]
.642 [16.3] .736 [18.7]
.315 [8.0]
(2) PLS
.187 [4.8] DIA.
.725
[18.4]
.401
[10.2]
.327
[8.3]
.120
[3.1]
.250 [6.4]
.174 [4.4]
4-40 THREAD
(2) PLS
2.402 [61.0]
.740 [18.8]
.125 [3.2]
4.725 [120.0]
4.440 [112.8]
.110 [2.8] REF.
.740
[18.8]
.110
[2.8]
.551 [14.0]
.453 [11.5]
.547 [13.9]
.315 [8.0]
(2) PLS
.450
[11.5]
.401
[10.2]
.725
[18.4]
.187 [4.8] DIA.
.120
[3.1]
.327
[8.3]
.250 [6.4]
.174
[4.4]
4-40 THREAD
(2) PLS
.235
[6.0]
.174 [4.4]
.120
[3.1]
.250 [6.4]
4.213 [107.0]
.758
[19.3]
.092 [2.4]
(2) PLS
.450 [11.5]
.125 [3.2]
.850 [21.6]
.421 [10.7]
.273 [7.0]
.472 [12.0] .075 [1.9]
.047 [1.2]
.310 [7.9]
(2) PLS 3.500 [88.9]
4.725 [120.0]
4.440 [112.8]
.401
[10.2]
.725
[18.4]
.187 [4.8] DIA.
.866 [22.0]
.120 [3.05]
(EMI DIMPLE)
.141 [3.6]
2.814 [71.5]
.216 [5.5]
.174 [4.4]
.341 [8.7]
.557 [14.2]
.125 [3.2]
.732 [18.6]
.466 [11.9]
3.118 [79.2]
.725
[18.4]
.401
[10.2] .031 [0.79]
DIMPLE
3.118 [79.2]
.466 [11.9]
.675 [17.2]
2.122 [53.9]
2.814 [71.5]
4-40 THREAD
(2) PLS
.340 [8.7]
.732 [18.6]
.190 [4.9]
.141 [3.6]
(EMI DIMPLE)
.401
[10.2]
.725
[18.4]
.120 [3.05]
COMPUTER BRACKETS
119
COMPUTER BRACKETS
120
•
Peripherals
•
Video Cards
•Parallel/Serial Ports •External Hard Drives
•External CD Drives
STANDARD COMPUTER BRACKETS
D-SUB
9 PIN
EISA/ISA PCI
EISA/ISA EISA/ISA
EISA/ISAEISA/ISA
CAT. NO. 9200-1 CAT. NO. 9200-2
CAT. NO. 9200-16
CAT. NO. 9207-1
CAT. NO. 9200-3 CAT. NO. 9200-11
EISA/ISA – 50 PIN EISA/ISA OR PCI
EISA/ISA – 37 PINEISA/ISA – 25 PIN
CAT. NO. 9200-4 CAT. NO. 9200-5
CAT. NO. 9200-19
CAT. NO. 9231-1
LOW PROFILE ACCESS PORT
25 - 37 PIN
50 PIN VENT
15 PIN
CUTOUT TYPE 9 1.470 [37.4]
1.962 [49.9] REF.
1.707 [43.4]
CUTOUT TYPE 9
2.199 [55.9] REF.
CUTOUT TYPE 9
.578 [14.7]
1.070 [27.2] REF.
CUTOUT TYPE 9
1.070 [27.2] REF.
.578 [14.7]
CUTOUT TYPE 15 2.295 [58.3]
2.950 [75.0] REF.
CUTOUT TYPE 15 2.193 [55.7]
2.849 [72.4] REF.
CUTOUT TYPE 25 1.883 [47.9]
2.808 [71.3] REF.
CUTOUT TYPE 37 1.004 [25.5]
2.254 [57.3] REF.
1.903 [48.4] REF.
.700 [17.8]
CUTOUT TYPE 50
1.600 [40.7]
.270 [6.9]
.462 [11.8]
.313 [8.0]
These computer brackets have been designed with a
variety of holes and cutouts to connect most peripherals. The
brackets shown reflect the most common configurations for
most applications. If our standard brackets do not fit your
production requirements, we can fabricate a bracket to
your exact specifications. Refer to pages 122 - 123 for blank
dimensions and page 126 for standard cutout dimensions.
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9207
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9231
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
For Bracket Dimensions
Refer to Cat. No. 9200
CAT. NO. 9200-14
.125 [3.2] DIA. HOLE TYP.
CUTOUT TYPE 15
2.193 [55.7]
2.849 [72.4] REF.
.593 [15.1]
1.249 [31.8] REF.
(2) PLS
MULTIPLE D-SUB
PERIPHERAL
COMPUTER BRACKETS
121
SCSI 1 - 50 PIN SCSI 2, 3 & 4 - 50 PIN
SCSI 1 - 68 PIN SCSI 2, 3 & 4 - 68 PIN
CAT. NO. 9200-6
CAT. NO. 9200-7
1.715 [43.6] REF.
CUTOUT SCSI 1 .800
[20.3]
.088 [2.24] 50 PIN
2.424 [61.6] REF.
CUTOUT
50 PIN
SCSI 2, 3 OR 4 1.509 [38.4]
.075 [1.91]
2.122 [53.9] REF.
SCSI 2, 3 OR 4
68 PIN
CUTOUT
.982 [25.0]
.080 [2.03]
2.060 [52.3] REF.
CUTOUT SCSI 1
68 PIN .920 [23.4]
.088 [2.24]
EISA/ISA EISA/ISA
EISA/ISA EISA/ISA
.578 [14.7]
1.070 [27.2] REF.
1.883 [47.9]
2.809 [71.4] REF.
CUTOUT TYPE 9
CUTOUT TYPE 25
2.900 [73.7] REF.
2.408 [61.2]
CUTOUT TYPE 9
(2) PLS 1.008 [25.6]
1.500 [38.1] REF.
EISA/ISA PCI
PCI EISA/ISA
CAT. NO. 9203-1
.640 [16.3]
.480 [12.2]
.500 [12.7]
2.305 [58.6]
1.765 [44.9]
SET
HAND
ISDN
.478 [12.2]
PHONE
1.445 [36.7]
LINE
1.043 [26.5]
1.985 [50.4] REF.
.270 [6.9] DIA.
(2) PLS .450 [11.5]
DIA.
(2) PLS
3.200 [81.3]
2.810 [71.4]
1.070 [27.2]
.585
[14.9]
CUTOUT TYPE 9
S-V IN
VIDEO IN
1.493 [37.9]
AUDIO OUT
AUDIO IN
EISA/ISA OR PCI PCI
.650 [16.5]
.835 [21.2]
.302 [7.7]
.150 [3.8] DIA.
(3) PLS
.550 [14.0]
1.710 [43.5]
1.910 [48.5]
2.110 [53.6]
.255 [6.5] (2) PLS
.530 [13.5]
(2) PLS
1.160 [29.5] 2.185 [55.5]
1.160 [29.5]
.595 [15.1]
.128 [3.3] DIA. (4) PLS
SCSI
CAT. NO. 9200-17CAT. NO. 9200-15
CAT. NO. 9200-9
SOUND CARDS
VIDEO CARDS
USB
CAT. NO. 9200-10
ISDN/PC FAX
CAT. NO. 9202-1
CAT. NO. 9203-2
FAX - MODEM
NETWORK
2.808 [71.3] REF.
1.883 [47.9]
CUTOUT TYPE 25 .320 [8.2]
.976 [24.8] REF.
CUTOUT TYPE 15
CAT. NO. 9200-8
CAT. NO. 9201-1
CAT. NO. 9204-1
CAT. NO. 9200-13
3.059 [77.7] REF.
.280 [7.1] DIA.
(3) PLS 1.975 [50.2]
1.550 [39.4]
.525 [13.4]
CUTOUT TYPE 15
MIC
.335 [8.5]
OUTPUT
INPUT
2.404 [61.1]
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9200
For Bracket Dimensions
Refer to Cat. No. 9203
For Bracket Dimensions
Refer to Cat. No. 9204
For Bracket Dimensions
Refer to Cat. No. 9202
For Bracket Dimensions
Refer to Cat. No. 9201
For Bracket Dimensions
Refer to Cat. No. 9203
For Bracket Dimensions
Refer to Cat. No. 9200
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
CAT. NO. 9200-12
'X' DATUM
'0 - 0'
'Y' DATUM
'0 - 0'
(2) PLS
4-40 THREAD
'X' DATUM
'0 - 0'
'Y' DATUM
'0 - 0'
2.225 [56.5] 1.250 [31.8]
(2) PLS
4-40 THREAD
'Y' DATUM
'0 - 0'
'X' DATUM
'0 - 0'
4-40 THREAD
(2) PLS 3.362 [85.4] .398 [10.1]
'Y' DATUM
'0 - 0'
'X' DATUM
'0 - 0'
■
NOTE: Refer to pages 114 and 115 for overall blank dimensions
CAT. NO. 9230
■
CAT. NO. 9201 (Ribbed)
■
CAT. NO. 9200
EISI/ISA or PCI
EISA/ISA with TABS
PCI with TABS
CAT. NO. 9206
■
CAT. NO. 9202
EISA/ISA with TABS
CAT. NO. 9207
CAT. NO. 9205
EISA/ISA with TABS
CAT. NO. 9208
EISA/ISA with TABS
LOW PROFILE with TABS PCI with TAB
CAT. NO. 9203
■
■
■ ■
CAT. NO. 9231 CAT. NO. 9204
■ ■
■
'Y' DATUM
'0 - 0'
'X' DATUM
'0 - 0'
4-40 THREAD
(2) PLS 2.402 [61.0] .551 [14.0]
(2) PLS 3.500 [88.9]
'X' DATUM
'0 - 0'
'Y' DATUM
'0 - 0'
4-40 THREAD
3.453 [87.7]
.190 [4.9]2.122 [53.9]
4-40 THREAD
(2) PLS
'Y' DATUM
'0 - 0'
'X' DATUM
'0 - 0'
4-40 THREAD
'X' DATUM
'0 - 0'
'Y' DATUM
'0 - 0'
.250 [6.4]
If you do not have your own drawing, please use the worksheet provided.
STEP 1: Select a standard blank configuration PCI or EISA/ISA, with or
without tabs.
STEP 2: If you’ve selected a standard blank with tabs and the tab
locations do not meet your requirements, indicate the
dimensions in the boxes.
STEP 3: Place your standard panel cutouts (Ex: DB9) on your selected
drawing.
STEP 4: Use Datum’s X and Y on drawing, to indicate the precise
location of the center lines of the cutout(s).
STEP 5: For stamped identification markings indicate the approximate
location(s).
STEP 6: Quantities Required:
If you have any questions, please contact our
application engineers.
Name: Title:
Company:
Address:
Phone: Fax:
For prompt quotations fax, mail or e-mail this worksheet.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
CUSTOM BRACKET WORKSHEET
122
CUSTOM BRACKET WORKSHEET
PUSH-IN TERMINALS & PINS
12 3
CAT. NO. 1236
.025 SQUARE WIRE WRAP PINS CONTACT PINS (SEAMLESS)
Completely burr free straight to within .003 (.08) per inch. Conical ends of square-wire with
smooth blend-in radius on corners assures ease of insertion with minimum damage to
pre-plated PCB holes.
Pins can be staked to .062 (1.57) and .093 (2.36) thick boards.
MINIATURE TUBULAR TERMINALS
“FLEA” CLIP “IMP” TERMINAL
“MICRO” TERMINAL
For subminiature applications where conventional terminals are too large or too
costly. Ideal for quick repairs of printed circuitry. Simply insert wire through hole
and it is held firmly by spring action assuring continued postive contact.
•Quick and Easy to Install •For Production or Prototype
•Postive Locking In-Hole • No Staking Required • Holds .010 (.25) to .050 (1.27) Diameter Wire
These terminals are often used for transistor and Bi-Pin lamp sockets. Terminals
snap into place and are firmly held without the need of staking. Wire leads can
be inserted from either end.
Terminals 1236 and 1237 have tapered socket spring forming that will
hold multiple leads in place. Terminals are pre-tinned for easy soldering.
CAT. NO. 1237 CAT. NO. 1238
Easily press-fit into a .042 (1.07) diameter hole may be flared for permanent
installation. Ideally designed for use in circuitry to support components when
space is at a premium.
CAT. NO. 1495
Excellent for point to point or feed thru wiring. Slot is serrated to grip
component leads. Multiple connections are made quick and easy.
CLAMP TERMINAL
CAT. NO. 1499FTCAT. NO. 1500
Terminal for production or prototype use. Holds as many as 7 leads without
soldering, by spring action.
CAT. NO. 1498CP
AA
B
.125 [3.2]
.034
[.86]
.025
[.64]
60°
L
.010 [.25]
.003 R.
[.08 R]
.812 [20.6] .260 [6.6]
.032 [0.81]
.085 [2.16]
.085 [2.16]
.312 [7.9]
.062 [1.57]
.234 [6.0]
REF.
.040
[1.02]
DIA.
.094 [2.39]
CAT. NO. AB
1223 .093 (2.36) .293 (7.4)
1224 .093 (2.36) .357 (9.1)
1226 .093 (2.36) .437 (11.1)
1200 .125 (3.18) .379 (9.6)
1210 .125 (3.18) .566 (14.4)
1230 .156 (3.96) .379 (9.6)
1231 .156 (3.96) .566 (14.4)
MATERIAL: Phosphor Bronze, Tin Plate MATERIAL: Brass, Nickel Plate
.375
[9.6]
.187
[4.8]
.053 [1.34]
.053
[1.35]
REF.
.058
[1.48] .052 [1.32]
.064
[1.7]
.078 [1.98] REF.
.030 [.76]
.130
[3.3]
.045
[1.14]
DIA.
.237
[6.0]
.437
[11.1]
.063 [1.6] REF.
.046 [1.17]
.100 [2.6]
.078 [1.98]
.359
[9.1]
.167
[4.3]
.030 [.76]
.034 [.86]
.031 [.79]
DIA.
.018 [.46]
DIA.
.065 [1.65]
DIA.
.080 [2.03]
DIA. FLANGE
.050 [1.27]
I. DIA.
.219
[5.6] .328
[8.4]
.047 [1.19]
.188
[4.8]
.469
[11.9]
.219
[5.6]
.080 [2.03]
DIA. FLANGE
.050 [1.27]
I. DIA.
.065 [1.65]
DIA.
.065 [1.65]
DIA.
.080 [2.03]
DIA. FLANGE
.050 [1.27]
I. DIA.
.219
[5.6]
.046 [1.17]
DIA. FLARE
.469
[11.9]
.188
[4.8]
Insertion Tool:
CAT. NO. 1323
Insertion Tool:
CAT. NO. 1322
Insertion Tool:
CAT. NO. 1322
Insertion Tool:
CAT. NO. 1322
Mtg. Hole .062 (1.57) Mtg. Hole .062 (1.57)
Mtg. Hole .093 (2.36)
MATERIAL:
.006 (.15) Matte Tin, Brass.
Pre-Tinned
MATERIAL:
.008 (.20) Matte Tin, Beryllium
Copper, Tin Plate
MATERIAL:
.008 (.20) Matte Tin, Beryllium
Copper, Tin Plate
MATERIAL:
.015 (.38) Matte Tin, Spring Steel,
Tin Plate
MATERIAL: .008 (.20) Matte Tin,
Beryllium Copper,
Tin Plate
MATERIAL:
.006 (.15) Matte Tin, Brass.
Pre-Tinned
MATERIAL:
.006 (.15) Matte Tin, Brass.
Pre-Tinned
.062 (1.57) — .067 (1.70)
Mounting Holes
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
For Arbor Press:
CAT. NO. TL-11;
For Hand Tool:
CAT. NO. 1214
INSERTION TOOL
CAT. LCAT. L
NO. Length NO. Length
5070
.400 (10.2)
5077
.642 (16.3)
5071
.440 (11.2)
5078
.675 (17.1)
5072
.515 (13.1)
5079
.720 (18.3)
5073
.535 (13.6)
5080
.850 (21.6)
5074
.600 (15.2)
5081
.916 (23.3)
5075
.615 (15.6)
5082
.995 (25.3)
5076
.625 (15.9)
5083
1.13 (28.7)
MULTI-PURPOSE HARDWARE
Products such as washers, hole plugs, grommets, bumpers, bushings,
clamps, rivets, brackets and ties have can be used in a multitude of envi-
ronments and applications such as:
•Chassis mounts and holes
•Access panels
•Wiring Outlets
•Electrical insulation
•Mechanical damping
•Cable/Fiber optic routing & securing
•PC board and electronic assemblies
Our quality system is ISO 9001:2008 certified. Our products are in
compliance with the RoHS and REACH directives. We provide 3D modeling,
CAD and other application-engineering support for modifications, special
designs or assembly requirements to assist you in choosing the right
Keystone product for your application.
MULTI-PURPOSE HARDWARE
125
CABLE MANAGEMENT
Cable Clamps. . . . . . . . . . . . . . . . . . . . . . . 126-127
Cable Ties & Clips . . . . . . . . . . . . . . . . . . . . . . . . . 127
CASE HARDWARE
Anti-Vibration Grommets . . . . . . . . . . . . . . . . 129
Bumpers & Feet. . . . . . . . . . . . . . . . . . . . . . . . . . 130
Bushings, Nylon” . . . . . . . . . . . . . . . . . . . . . . . . . 128
Grommets, Rubber & Nylon” . . . . . . . . . . . . . . 129
Hole plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
TERMINALS
Feed Thru . . . . . . . . . . . . . . . . . . . . . . . . . 136-137
Insulated Terminals . . . . . . . . . . . . . . . . 136-137
Turret Terminals (Non-insulated) . . . 138-139
TERMINAL BOARDS
Turret . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-142
Quick Fit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Binding Post (Screw). . . . . . . . . . . . . . . . . . . . . 143
Solder Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . 143
UNIVERSAL HARDWARE
Eyelets & Rivets . . . . . . . . . . . . . . . . . . . . . . . . . 134
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Washers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Washers, Retaining . . . . . . . . . . . . . . . . . . . . . . . 131
Washers, Shoulder . . . . . . . . . . . . . . . . . . . . . . . 132
SECTION CONTENTS
METAL CABLE CLAMPS
126
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
STEEL CABLE CLAMPS STEEL HALF CLAMPS
INSULATED STEEL CABLE CLAMPS INSULATED STEEL HALF CLAMPS
MATERIAL: .032 (.81) Steel, Zinc Plate
CAT. DL
NO. FOR DIA. CTR TO CTR
8100 .187 (4.7) .375 (9.5)
8101 .250 (6.4) .406 (10.3)
8102 .312 (7.9) .437 (11.1)
8103 .375 (9.5) .468 (11.9 )
8104 .437 (11.1) .500 (12.7)
8105 .500 (12.7) .531 (13.5)
8106 .562 (14.4) .562 (14.3)
8107 .625 (15.9) .594 (15.1)
8108 .687 (17.4) .625 (15.9)
8109 .750 (19.0) .656 (16.7)
8110 .812 (20.6) .687 (11.4)
8111 .875 (22.2) .718 (18.2)
8112 .937 (23.8) .750 (19.1)
8113 1.00 (25.4) .781 (19.8)
MATERIAL: Steel, Zinc Plate
CAT. DH L GW
NO. FOR DIA. HOLE DIA. CTR TO CTR B THICK WIDTH
8140 .125 (3.2) .218 (5.5) .437 (11.1) .125 (3.2)
8141 .187 (4.7) .218 (5.5) .437 (11.1) .156 (4.0) .032 (.81) .500 (12.7)
8142 .250 (6.4) .218 (5.5) .437 (11.1) .187 (4.7)
8143 .312 (7.9) .218 (5.5) .500 (12.7) .250 (6.4) .048 (1.22) .500 (12.7)
8144 .375 (9.5) .218 (5.5) .531 (13.5) .312 (7.9) .048 (1.22) .625 (15.9)
8145 .437 (11.1) .218 (5.5) .562 (14.3) .375 (9.5)
8146 .500 (12.7) .218 (5.5) .625 (15.9) .437 (11.1)
8147 .562 (14.3) .218 (5.5) .687 (17.4) .500 (12.7) .060 (1.52) .625 (15.9)
8148 .625 (15.9) .218 (5.5) .750 (19.1) .562 (14.3)
8149 .687 (17.4) .218 (5.5) .812 (20.6) .625 (15.9)
8150 .750 (19.1) .218 (5.5) .812 (20.6) .687 (17.4) .060 (1.52) .625 (15.9)
8151 .812 (20.6) .218 (5.5) .875 (22.2) .750 (19.1)
8152 .875 (22.2) .281 (7.1) .937 (23.8) .812 (20.6)
8153 .937 (23.8) .281 (7.1) .968 (24.6) .812 (20.6) .060 (1.52) .750 (19.1)
8154 1.000 (25.4) .281 (7.1) 1.000 (25.4) .937 (23.8)
MATERIAL: .032 (.81) Steel,
Zinc Plate
Cushion: Black Vinyl
MATERIAL: Steel, Zinc Plate
Cushion: Black Vinyl
CAT. DL
NO. FOR DIA. CTR TO CTR
8121 .187 (4.7) .406 (10.3)
8122 .250 (6.4) .437 (11.1)
8123 .312 (7.9) .468 (11.9)
8124 .375 (9.5) .500 (12.7)
8125 .437 (11.1) .531 (13.5)
8126 .500 (12.7) .562 (14.3)
8127 .562 (14.3) .594 (15.1)
8128 .625 (15.9) .625 (15.9)
8129 .687 (17.4) .656 (16.7)
8130 .750 (19.1) .687 (17.4)
8131 .812 (20.6) .718 (18.2)
8132 .875 (22.2) .750 (19.1)
8133 .937 (23.8) .781 (19.8)
8134 1.000 (25.4) .812 (20.6)
D
L.218
[5.6]
.500
[12.7]
.203 [5.2]
DIA.
B
L
W
D
G
H
W
L
B
D
G
H
.500
[12.7]
D
L.218 [5.6]
.203 [5.2]
DIA.
Ideal for securing, insulating and routing cable, wiring, piping, tubing, components
and fibre optics.
Ideal for securing, insulating and routing cable, wiring, piping, tubing, components
and fibre optics.
Ideal for securing, grounding and routing cable, wiring, piping, tubing, components
and fibre optics.
Ideal for securing, grounding and routing cable, wiring, piping, tubing, components
and fibre optics.
CAT. DH L GW
NO. FOR DIA. HOLE DIA. CTR TO CTR B THICK WIDTH
8160 .187 (4.7) .218 (5.5) .437 (11.1) .187 (4.7) .032 (.81) .500 (12.7)
8161 .250 (6.4) .218 (5.5) .500 (12.7) .250 (6.4) .048 (1.22) .500 (12.7)
8162 .312 (7.9) .218 (5.5) .531 (13.5) .312 (7.9) .048 (1.22) .625 (15.9)
8163 .375 (9.5) .218 (5.5) .562 (14.3) .375 (9.5)
8164 .437 (11.1) .218 (5.5) .625 (15.9) .437 (11.1)
8165 .500 (12.7) .218 (5.5) .687 (17.4) .500 (12.7)
8166 .562 (14.3) .218 (5.5) .750 (19.1) .562 (14.3) .060 (1.52) .625 (15.9)
8167 .625 (15.9) .218 (5.5) .812 (20.6) .625 (15.9)
8168 .687 (17.4) .218 (5.5) .812 (20.6) .687 (17.4)
8169 .750 (19.1) .218 (5.5) .875 (22.2) .750 (19.1)
8170 .812 (20.6) .281 (7.1) .937 (23.8) .812 (20.6)
8171 .875 (22.2) .281 (7.1) .968 (24.6) .812 (20.6) .060 (1.52) .750 (19.1)
8172 .937 (23.8) .281 (7.1) 1.000 (25.4) .937 (23.8)
8173 1.000 (25.4) .281 (7.1) 1.062 (27.0) 1.000 (25.4)
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
TENSILE FOR L W T
CAT. STRENGTH BUNDLE LENGTH WIDTH THICKNESS
NO. (Min. Bundle) DIA. (Max.) (Approx.) (Approx.) (Approx.)
8865 18 lbs 1.000 (25.4) 4.250 (108.O) .100 (2.54) .045 (1.14)
8866 18 lbs 2.000 (50.8) 8.000 (203.2) .100 (2.54) .045 (1.14)
8867 40 lbs 1.250 (31.8) 6.000 (152.4) .140 (3.56) .050 (1.27)
8868 50 lbs 1.750 (44.5) 7.500 (190.5) .190 (4.83) .055 (1.40)
8869 120 lbs 4.000 (101.6) 14.500 (368.3) .190 (4.83) .055 (1.40)
8870 Hand Operated Cable Tie Installation Tool for 18lb to 50lb Ties
CUSHIONED CABLE CLAMPS NYLON CABLE CLAMPS
Ideal for securing, insulating and routing cable wiring, piping, tubing, components
and fibre optics.
MATERIAL: .050 (1.27) Nylon 6/6, White
Popular sizes and strengths to meet common cable tie requirements. Injection
molded with one piece construction for strength and reliability. Easily installed
by hand. Optional installation tool available, tightens and flush cuts cable tie.
NYLON CABLE TIES
CAT. NO. 8860
MATERIAL: Natural Nylon 6/6, UL Rated 94V-2
FOR
.062 [1.57]
THICK
PANEL
.065 [1.65]
.400
[10.2]
.220 [5.6]
.380 [9.7]
.190 [4.9]
.320 [8.2]
W
T
L
MATERIAL: .032 (0.81) Stainless Steel
Cushion: EPDM Rubber
.500 [12.7]
L.250 [6.4]
.203 [5.2]
DIA.
D
D
L.218
[5.6]
W
H
MATERIAL: Nylon 6/6, UL Rated 94V-2
CAT. DL
NO. FOR DIA. CTR TO CTR
8090 .250 (6.4) .711 (18.1)
8091 .375 (9.5) .500 (12.7)
8092 .500 (12.7) .562 (14.3)
8093 .625 (15.9) .718 (18.2)
8094 .750 (19.1) .781 (19.8)
8095 .875 (22.2) .843 (21.4)
8096 1.000 (25.4) .906 (23.0)
•Ideal for securing in rugged applications
•These cushioned cable clamps secure
tightly and protect against shock and
vibration
These clips snap into PC Boards or Panel chassis and are ideal for securing cable
wiring, piping, tubing, components and fibre optics when used with cable ties.
Recommended Mtg. Hole .187 (4.8) diameter.
CAT. DLWH
NO. FOR DIA. CTR TO CTR WIDTH HOLE
7620 .125 (3.2) .325 (8.3) .375 (9.5) .140 (3.6)
7621 .125 (3.2) .325 (8.3) .375 (9.5) .203 (5.2)
7622 .187 (4.7) .380 (9.7) .375 (9.5) .140 (3.6)
7623 .187 (4.7) .380 (9.7) .375 (9.5) .203 (5.2)
7624 .250 (6.4) .410 (10.4) .375 (9.5) .140 (3.6)
7625 .250 (6.4) .410 (10.4) .375 (9.5) .203 (5.2)
7626 .312 (7.9) .445 (11.3) .375 (9.5) .140 (3.6)
7627 .312 (7.9) .445 (11.3) .375 (9.5) .203 (5.2)
7628 .375 (9.5) .475 (12.1) .375 (9.5) .140 (3.6)
7629 .375 (9.5) .475 (12.1) .375 (9.5) .203 (5.2)
7630 .437 (11.1) .525 (13.3) .375 (9.5) .140 (3.6)
7631 .437 (11.1) .525 (13.3) .375 (9.5) .203 (5.2)
7632 .500 (12.7) .550 (14.0) .375 (9.5) .140 (3.6)
7633 .500 (12.7) .550 (14.0) .375 (9.5) .203 (5.2)
7634 .562 (14.3) .625 (15.9) .500 (12.7) .203 (5.2)
7635 .625 (15.9) .660 (16.8) .500 (12.7) .203 (5.2)
7636 .750 (19.1) .785 (19.9) .500 (12.7) .203 (5.2)
7637 .875 (22.2) .845 (21.5) .500 (12.7) .203 (5.2)
7638 1.000 (25.4) .910 (23.1) .500 (12.7) .203 (5.2)
7639 1.125 (28.6) .970 (24.6) .500 (12.7) .203 (5.2)
7640 1.250 (31.8) 1.060 (26.9) .500 (12.7) .203 (5.2)
CABLE TIE ROUTING CLIP
CABLE CLAMPS & TIES
127
HOLE PLUGS & BUSHINGS
128
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
NYLON HOLE PLUGS STEEL HOLE PLUGS
Closes unused chassis holes quickly and economically. Plugs are abrasion and
vibration resistant.
MATERIAL: Nylon 6/6, Matte Finish, Black
.125 [3.2]
.093 [2.36]
.062 [1.57]
.032 [0.81]
.062 [1.57] C
B
CAT. HOLE PANEL
NO. DIAMETER THICKNESS B C
8600 .250 (6.4) .062 (1.57) .312 (7.9) .312 (7.9)
8601 .312 (7.9) .062 (1.57) .375 (9.5) .312 (7.9)
8602 .375 (9.5) .125 (3.2) .468 (11.9) .406 (10.3)
8603 .500 (12.7) .125 (3.2) .578 (14.7) .406 (10.3)
8604 .625 (15.9) .125 (3.2) .734 (18.6) .406 (10.3)
8605 .750 (19.1) .125 (3.2) .921 (23.4) .406 (10.3)
8606 .875 (22.2) .125 (3.2) 1.015 (25.8) .453 (11.5)
8607 1.000 (25.4) .125 (3.2) 1.203 (30.6) .453 (11.5)
8608 1.125 (28.6) .125 (3.2) 1.218 (30.9) .453 (11.5)
8609 1.250 (31.8) .125 (3.2) 1.375 (34.9) .453 (11.5)
8610 1.375 (34.9) .125 (3.2) 1.500 (38.1) .453 (11.5)
8611 1.500 (38.1) .125 (3.2) 1.671 (42.4) .453 (11.5)
Excellent spring retention. Plugs will cover chassis holes, wiring outlets, access holes
or unused openings.
MATERIAL: Steel, Nickel Plate
A
B
C
CAT. HOLE PANEL
NO. DIAMETER THICKNESS A B C PRONGS
7600 .250 (6.4) .031-.062 (.81-1.57) .406 (10.3) .234 (5.9) .062 (1.57) 6
7601 .312 (7.9) .047-.078 (1.19-1.98) .437 (11.1) .250 (6.4). 062 (1.57) 6
7602 .375 (9.5) .047-.062 (1.19-1.57) .500 (12.7) .234 (5.9) .062 (1.57) 6
7603 .500 (12.7) .031-.062 (.81-1.57) .656 (16.7) .281 (7.1) .078 (1.98) 8
7604 .625 (15.9) .062-.093 (1.57-2.36) .812 (20.6) .296 (7.5) .078 (1.98) 8
7605 .750 (19.1) .062-.093 (1.5 -2.36) .921 (23.4) .296 (7.5) .078 (1.98) 12
7606 .875 (22.2) .062-.093 (1.57-2.36) 1.062 (27.0) .296 (7.5) .062 (1.57) 12
7607 1.000 (25.4) .062-.156 (1.57-3.9) 1.140 (29.0) .328 (8.3) .093 (2.36) 12
7608 1.125 (28.6) .031-.125 (.79-3.2) 1.312 (33.3) .343 (8.7) .093 (2.36) 12
7609 1.250 (31.8) .062-.093 (1.57-2.36) 1.437 (36.5) .343 (8.7) .093 (2.36) 12
7610 1.375 (34.9) .031-.125 (.79-3.2) 1.562 (39.7) .406 (10.3) .078 (1.98) 12
7611 1.500 (38.1) .031-.062 (.79-1.57) 1.640 (41.7) .406 (10.3) .093 (2.36) 12
B
C
.062 [1.57]
.032 [0.81]
.062 [1.57]
.093 [2.36]
.125 [3.2]
NYLON VENT PLUGS
MATERIAL: Nylon 6/6, Matte Finish, Black
Used to cover chassis holes while allowing air flow for ventilation.
•Snaps into .032 (.81) to .125 (3.2)
thick panels.
CAT. HOLE
NO. DIAMETER B C
8612 .875 (22.2) 1.015 (25.8) .453 (11.5)
8613 1.000 (25.4) 1.218 (30.9) .453 (11.5)
Designed to be assembled into holes that already contain wire or cable. Versatile
bushing can be used on all chassis from .032 (.81) to .125 (3.2).
NYLON SPLIT BUSHINGS
B
A
.406
[10.3]
.062 [1.57]
.032 [0.81]
.062 [1.57]
.093 [2.36]
.125 [3.2]
MATERIAL: Nylon 6/6, Black
MATERIAL: Nylon 6/6, Black
HOLE A B
CAT. SIZE INSIDE HEAD
NO. REQUIRED DIAMETER DIAMETER
8490 .375 (9.5) .265 (6.7) .421 (10.7)
8491 .500 (12.7) .312 (7.9) .562 (14.3)
8492 .562 (14.3) .390 (9.9) .640 (16.3)
8493 .625 (15.9) .453 (11.5) .687 (17.4)
8494 .750 (19.1) .546 (13.9) .796 (20.2)
8495 .875 (22.2) .671 (17.0) .921 (23.4)
8496 1.000 (25.4) .796 (20.2) 1.062 (27.0)
NYLON INSULATING BUSHINGS
Snaps into panel hole to provide protection for
wire, cable and tubing from sharp uneven edges.
HOLE MAXIMUM A B C
CAT. SIZE CHASSIS INSIDE HEAD OVERALL
NO. REQUIRED THICKNESS DIAMETER DIAMETER HEIGHT
8470 .250 (6.4) .062 (1.57) .125 (3.2) .312 (7.9) .312 (7.9)
8471 .312 (7.9) .062 (1.57) .187 (4.7) .375 (9.5) .312 (7.9)
8472 .375 (9.5) .125 (3.2) .250 (6.4) .468 (11.9) .406 (10.3)
8473 .437 (11.1) .125 (3.2) .312 (7.9) .531 (13.5) .406 (10.3)
8474 .500 (12.7) .125 (3.2) .375 (9.5) .578 (14.7) .406 (10.3)
8475 .562 (14.3) .125 (3.2) .437 (11.1) .656 (16.7) .406 (10.3)
8476 .625 (15.9) .125 (3.2) .500 (12.7) .718 (18.2) .406 (10.3)
8477 .750 (19.1) .125 (3.2) .562 (14.3) .843 (21.4) .406 (10.3)
8478 .875 (22.2) .125 (3.2) .625 (15.9) .953 (24.2) .453 (11.5)
8479 1.000 (25.4) .125 (3.2) .750 (19.1) 1.125 (28.6) .453 (11.5)
8480 1.187 (30.1) .125 (3.2) .937 (23.8) 1.312 (33.3) .453 (11.5)
8481 1.250 (31.8) .125 (3.2) .937 (23.8) 1.359 (34.5) .453 (11.5)
8482 1.375 (34.9) .125 (3.2) 1.000 (25.4) 1.468 (37.3) .453 (11.5)
8483 1.500 (38.1) .125 (3.2) 1.062 (27.0) 1.609 (40.9) .453 (11.5)
8484 1.750 (44.5) .125 (3.2) 1.375 (34.9) 1.875 (47.6) .453 (11.5)
8485 2.000 (50.8) .125 (3.2) 1.625 (41.3) 2.125 (54.0) .453 (11.5)
8486 2.500 (63.5) .250 (6.4) 1.968 (50.0) 2.656 (67.5) .718 (18.2)
.125 [3.2]
.093 [2.36]
.062 [1.57]
.032 [0.81]
.062 [1.57] C
A
B
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
GROMMETS & BUSHINGS
ANTI-VIBRATION GROMMETS
RUBBER GROMMETS FLEXIBLE GROMMETING
Anti-vibration grommets are designed for noise suppression in office or lab equipment. Additionally,
they isolate sensitive instrumentation from unpredictable vibration and shock. The fingers of the grommets
provide the flex needed to dampen unwanted noise and vibration. Specially designed shoulder screws
are designed to provide the correct spacing.
Ideal for electrical insulation and mechanical damping.
O.D.
H
A
B
I.D.
I.D. B A O.D.
CAT. INSIDE MTG. PANEL OUTSIDE H
NO. DIAMETER HOLE THICKNESS DIAMETER HEIGHT
730 .125 (3.2) .187 (4.7) .062 (1.57) .312 (7.9) .187 (4.7)
733 .125 (3.2) .250 (6.4) .062 (1.57) .343 (8.7) .187 (4.7)
734 .125 (3.2) .437 (11.1) .062 (1.57) .625 (15.9) .187 (4.7)
735 .125 (3.2) .375 (9.5) .093 (2.36) .500 (12.7) .312 (7.9)
736 .187 (4.7) .312 (7.9) .062 (1.57) .437 (11.1) .218 (5.5)
737 .187 (4.7) .281 (7.2) .093 (2.36) .437 (11.1) .218 (5.5)
738 .250 (6.4) .437 (11.1) .062 (1.57) .625 (15.9) .187 (4.7)
739 .250 (6.4) .375 (9.5) .062 (1.57) .562 (14.3) .250 (6.4)
740 .250 (6.4) .375 (9.5) .093 (2.36) .500 (12.7) .250 (6.4)
741 .312 (7.9) .562 (14.3) .062 (1.57) .812 (20.6) .312 (7.9)
742 .312 (7.9) .437 (11.1) .062 (1.57) .625 (15.9) .281 (7.1)
743 .312 (7.9) .437 (11.1) .093 (2.36) .625 (15.9) .312 (7.9)
744 .375 (9.5) .625 (15.9) .062 (1.57) .875 (22.2) .312 (7.9)
745 .375 (9.5) .500 (12.7) .062 (1.57) .625 (15.9) .250 (6.4)
732 .437 (11.1) .562 (14.3) .062 (1.57) .750 (19.1) .250 (6.4)
746 .437 (11.1) .687 (17.4) .062 (1.57) .937 (23.8) .312 (7.9)
747 .500 (12.7) .812 (20.6) .062 (1.57) 1.062 (27.0) .312 (7.9)
748 .500 (12.7) 1.250 (31.8) .062 (1.57) 1.500 (38.1) .250 (6.4)
749 .500 (12.7) .750 (19.1) .093 (2.36) .968 (24.6) .281 (7.1)
750 .562 (14.3) .812 (20.6) .062 (1.57) 1.062 (27.0) .312 (7.9)
752 .625 (15.9) .875 (22.2) .062 (1.57) 1.125 (28.6) .312 (7.9)
753 .625 (15.9) 1.250 (31.8) .062 (1.57) 1.500 (38.1) .250 (6.4)
755 .750 (19.1) 1.062 (27.0) .062 (1.57) 1.375 (34.9) .375 (9.5)
756 .750 (19.1) 1.437 (36.5) .062 (1.57) 1.812 (46.0) .375 (9.5)
757 .875 (22.2) 1.250 (31.8) .062 (1.57) 1.625 (41.3) .437 (11.1)
MATERIAL: Rubber, BUNA N
“UNIVERSAL” RUBBER GROMMET
EXPANDABLE
MEMBRANE
I.D.
O.D.
"A" DIA HOLE.
B
H
.060 [1.52]
MATERIAL: Thermoplastic Rubber, Black
•Designed to adjust to different
cable diameters from .125 (3.2)
to .312 (7.9)
.
•
Self-adjusting membrane
forms a dust resistant seal.
MATERIAL: Nylon 6/6, Black
MATERIAL:
Isolator: EPDM Rubber
Shoulder Screw: Steel, Nickel Plate
Ideal for maintenance, short-run production, R&D or
prototyping. Supplied in 25 ft. rolls. Make your own
grommets to fit any size or shape required.
A
W
H
CAT. MAX WHA
NO. PANEL WIDTH HEIGHT THICK
8615 .052 (1.32) .139 (3.5) .190 (4.8) .028 (0.7)
8616 .085 (2.16) .182 (4.6) .200 (5.1) .040 (1.02)
8617 .125 (3.18) .232 (5.9) .220 (5.6) .040 (1.02)
CAT. O.D. I.D. A B H
NO. OUTSIDE INSIDE DIA. DIA. HOLE MTG HOLE HEIGHT
777 .650 (16.32) .380 (9.7) .090 (2.3) .500 (12.7) .250 (6.4)
778 1.25 (31.8) .810 (20.6) .160 (4.0) 1.000 (25.4) .370 (9.4)
BLACK BLUE O.D. I.D. A B SHOULDER SCREW
CAT. CAT. OUTSIDE INSIDE H PANEL MTG. LENGTH
NO. NO. DIAMETER DIAMETER HEIGHT THICK HOLE (L) THREAD D HEAD
765 766 .379 (9.6) .154 (3.9) .228 (5.8) .063 (1.6) .250 (6.4) .189 (4.8) 6-32 .250 (6.4)
769 770 .377 (9.6) .161 (4.1) .298 (7.6) .125 (3.2) .250 (6.4) .252 (6.4) 6-32 .300 (7.6) Hex
775 776 .551 (14.0) .191 (4.9) .319 (8.1) .063 (1.6) .375 (9.5) .318 (8.0) 6-32 .394 (10.0)
767 768 .379 (9.6) .154 (3.9) .228 (5.8) .047 (1.2) .250 (6.4) .197 (5.0) M3 .394 (10.0)
771 772 .411 (11.2) .181 (4.6) .209 (5.3) .031 (0.8) .315 (8.0) .197 (5.0) M3 .394 (10.0) Round
773 774 .551 (14.0) .191 (4.9) .291 (7.4) .047 (1.2) .375 (9.5) .252 (6.4) M3 .394 (10.0)
H
A
B
I.D.
O.D.
THREAD
D
L
Screw supplied unassembled with isolator
ROUND HEAD HEX HEAD
129
RUBBER BUMPERS
130
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
ADHESIVE BUMPERS
Applies quicky and easily. Prevents nicks, scratches, scuffs, vibration, slippage and noise. Easy peel and stick mounting.
Crack resistant. High coefficient of friction. Sold in sheets.
MATERIAL: Molded Polyurethane MATERIAL: Molded Polyurethane
DIAMETER
HEIGHT
SELF-ADHESIVE SURFACE SELF-ADHESIVE SURFACE
HEIGHT
DIAMETER
RECESSED BUMPERS
SELF-LOCKING BUMPER FOOT
Provides excellent traction and shock absorbing qualities. available with or without Mold-in Washers.
MATERIAL: Rubber, BUNA S (Figs. 1 & 2), EPDN MATERIAL: Rubber, BUNA S (Figs. 1 & 2), EPDN MATERIAL: EPDN Rubber
CAT. SCREW
NO. FIG. A B C D E SIZE
720 1 .500 (12.7) .250 (6.4) .250 (6.4) .187 (4.7) .125 (3.2) # 4
721 1 .625 (15.9) .312 (7.9) .250 (6.4) .187 (4.7) .125 (3.2) # 4
722 1 .718 (18.2) .437 (11.1) .250 (6.4) .218 (5.5) .125 (3.2) # 4
723 2 .937 (23.8) .375 (9.5) .375 (9.5) .218 (5.5) .187 (4.7) # 8
724* 3 .687 (17.4) .250 (6.4) .343 (8.7) .125 (3.2) .155 (3.9) # 6
725* 3 .875 (22.2) .312 (7.9) .406 (10.3) .187 (4.7) .187 (4.7) # 8
726* 3 1.062 (27.0) .437 (11.1) .468 (11.9) .234 (5.9) .200 (5.1) # 10
727 3 .562 (14.3) .375 (9.5) .218 (5.5) .187 (4.7) .115 (2.9) # 4
728 3 .750 (19.1) .437 (11.1) .265 (6.7) .250 (6.4) .148 (3.8) # 6
729 3 .937 (23.8) .625 (15.9) .359 (9.1) .328 (8.3) .174 (4.4) # 8
B
D
E
C
A
FIG. 1 FIG. 2 Mold-In Washer FIG. 3 Mold-In Washer
E
A
B
D
C
E
A
D
B
C
•
A unique easy-to-install self-locking bumper foot
•
Two piece assembly, furnished pre-assembled
•
Vibration absorbing and skid resistant
•Mounts without screws or tools
INSERTED)
.200 [5.1]
LOCKING PIN
PARTIALLY
(SHOWN
.425 [10.8]
.910 [23.1] DIA.
.312 [7.9]
.980 [24.9]
DIA.
MATERIAL:
Foot: Santoprene, Black Pin: Polypropylene, Black
Recommended Mounting Hole: .305 (7.8) diameter
CAT. NO. 717
780 Series 783 SERIES
781 Series 784 SERIES
782 Series 785 SERIES
BLACK CLEAR
CAT. NO. CAT. NO. DIAMETER HEIGHT PARTS/SHEET
780-B 780-C .375 (9.5) .125 (3.2) 300
781-B 781-C .500 (12.7) .060 (1.5) 200
782-B 782-C .500 (12.7) .140 (3.6) 200
BLACK CLEAR
CAT. NO. CAT. NO. DIAMETER HEIGHT PARTS/SHEET
783-B 783-C .250 (6.4) .062 (1.6) 578
784-B 784-C .335 (8.5) .085 (2.2) 450
785-B 785-C .440 (11.2) .200 (5.1) 242
FLAT DOMED
MATERIAL:
Fibre: Commercial Grade per ASTM D710 Nylon: Grade 6/6 per ASTM D4066
W THICKNESS
.032 (.81) .047 (1.19) .062 (1.57)
MATERIAL I.D. O.D. CAT. NO. CAT. NO. CAT. NO.
.187 (4.8) 3111 3148 3366
FIBRE .098 (2.49) .250 (6.4) 3112 3149 3367
#2 .312 (7.9) 3113 3150 3194
.187 (4.8) 3114 3151 3356
NYLON .098 (2.49) .250 (6.4) 3347* 3152 3357*
#2 .312 (7.9) 3115 3153 3195
.250 (6.4) 3116 3154 3368
FIBRE .120 (3.05) .312 (7.9) 348 3155 3196
#4 .375 (9.5) 3117 3156 3197
.250 (6.4) 3348 345 3358
NYLON .120 (3.05) .312 (7.9) 3359 3157 3198
#4 .375 (9.5) 3118 3158 3200
.250 (6.4) 3119 3159 3369
FIBRE .140 (3.56) .312 (7.9) 3120 3160 3370
#6 .375 (9.5) 3121 3161 3201
.250 (6.4) 3122 3162 3360
NYLON .140 (3.56) .312 (7.9) 3349 346 3361
#6 .375 (9.5) 3123 3163 3202
.312 (7.9) 3124 3164 3203
FIBRE .171 (4.34) .375 (9.5) 3125 3165 3372
#8 .437 (11.1) 3126 3166 3204
.312 (7.9) 3127 3167 3205
NYLON .171 (4.34) .375 (9.5) 3350 3168 3363
#8 .437 (11.1) 3128 3169 3206
.312 (7.9) 349 3170 3207
FIBRE .196 (4.98) .375 (9.5) 3129 3171 3208
#10 .437 (11.1) 3130 3172 3209
.500 (12.7) 3131 3173 3210
.312 (7.9) 3364 3174 3211
NYLON .196 (4.98) .375 (9.5) 3352 3175 3212
#10 .437 (11.1) 3132 3176 3213
.500 (12.7) 3133 3177 3214
.437 (11.1) 3134 3178 3215
FIBRE .260 (6.60) .500 (12.7) 3135 3179 3373
1/4” .625 (15.9) 3136 3180 3216
.750 (19.1) 3137 3181 3217
.437 (11.1) 3138 3182 3218
NYLON .260 (6.60) .500 (12.7) 3353 3183 3365
1/4” .625 (15.9) 3139 3184 3219
.750 (19.1) 3140 3185 3220
.500 (12.7) 3141 3186 3221
FIBRE .385 (9.65) .625 (15.9) 3142 3187 3222
3/8” .750 (19.1) 3143 3188 3223
1.000 (25.4) 3144 3189 3224
.500 (12.7) 3145 3190 3225
NYLON .385 (9.65) .625 (15.9) 3354 3191 3226
3/8” .750 (19.1) 3146 3192 3227
1.000 (25.4) 3147 3193 3228
* .090 (2.3) I.D.
O.D.
W I.D.
NYLON RETAINING WASHERS
STEEL FLAT WASHERS
STEEL LOCK WASHERSINTERNAL TOOTH WASHERS
WASHERS
131
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
FLAT WASHERS – NYLON & FIBRE
Retaining Washers are similar to our standard
washers, but with a specially configured ID
designed to grip the screw shank. The washer
remains attached to the screw, for quick, easy
assembly.
O.D.
A
W
I.D.
W
I.D.
O.D.
O.D.
WI.D.
O.D.
I.D. W
CAT. NO. I.D. O.D. W SCREW SIZE
4692 .128 (3.3) .281 (7.1) .025 (.63) #4 (M3)
7235-1 .120 (3.1) .220 (5.6) .032 (.81)
4699 .147 (3.7) .373 (9.5) .031 (.80) #6 (M3.5)
4703 .200 (5.1) .436 (11.1) .033 (.84) #10 (M4)
1719-1 .391 (9.9) 1.500 (38.1) .094 (2.4) 3/8”
MATERIAL: Phoshor Bronze - Nickel Plate
.032 (0.81).062 (1.57)SCREW
CAT. NO. CAT. NO. SIZE A I.D. O.D.
2244 2284 #2 (M2) .115 (2.9) .078 (1.9) .203 (5.2)
2245 2285 #4 .156 (3.9) .102 (2.6) .256 (6.7)
2246 2286 #6 (M3.5) .198 (5.0) .128 (3.3) .328 (8.3)
2247 2287 #8 (M4) .235 (5.9).152 (3.8).390 (9.9)
2248 — .135 (3.4) .390 (9.9)
2249 — .453 (11.5)
— 2290 #10 .227 (7.0) .177 (4.5).500 (12.7)
— 2291 .630 (16.0)
2252 2292 #1/4 (M6) .375 (9.5) .234 (5.9) .593 (15.1)
2253 2293 #3/8 .564 (14.3) .350 (8.9) .890 (22.6)
HEIGHT (H)
CAT. NO. I.D. O.D. W SCREW SIZE
4693 .177 (3.0) .205 (5.2) .031 (.78) #4 (M3)
7235-2 .177 (3.0) .197 (5.0) .025 (.63)
4700 .144 (3.7) .250 (6.4) .033 (.84) #6 (M3.5)
1477 .195 (5.0) .320 (8.1) .047 (1.2) #10 (M4)
1476 .256 (6.5) .479 (12.2) .074 (1.9) 1/4” (M6)
1485 .321 (8.2) .586 (14.8) .078 (2.0) 5/16” (M8)
CAT. NO. I.D. O.D. W SCREW SIZE
11362-5 .226 (5.7) .402 (10.2) .020 (.51) #12 (M5)
4691 .261 (6.6) .469 (11.9) .025 (.63) 1/4” (M6)
MATERIAL:
Nylon,6/6 UL Rated 94V-0
MATERIAL: Steel, Zinc Plate
MATERIAL: Steel, Zinc Plate
WASHERS & NUTS
132
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
MOUNT CHASSIS, PANELS, HEAT SINKS, SOCKETS
HEX MACHINE NUTS
BLIND CAPTIVE NUTS - PRESS FIT
METRIC MACHINE NUTS
•
Easy Assembly
•
Dampens Vibration
•Eliminates Insulating Washer • Hi-Dielectric Strength
T
A
H
H IDEAL
HOLE SHEET
CAT. NO. THREAD SIZE REQ’D. THICKNESS A T
4341 4-40 .250 (6.4) .047 (1.2) .312 (7.9) .030 (.76)
4342 6-32 .312 (7.9) .078 (1.9) .375 (9.5) .030 (.76)
4343 8-32 .406 (10.3) .093 (2.4) .500 (12.7) .030 (.76)
MATERIAL: Molded Nylon with Brass threaded insert
A unique reusable fastener made of NYLON which contains a
threaded brass nut. Finger pressure or light tap seals it in a
pre-drilled hole. The nut is drawn up causing a Nylon bulge
behind the workpiece. Screw may be removed or replaced.
Shown Installed
(Screw not supplied)
THREAD
HEX
THREAD
HEX
MATERIAL: Nylon 6/6 (RoHS Compliant)
Steel, Zinc Plate (Non-RoHS Compliant)
Note: RoHS Compliant finishes available on
special order
MATERIAL: Nylon 6/6 UL Rated 94V-2
Steel, Nickel Plate
NYLON SHOULDER WASHER/BUSHINGS
FIBRE SHOULDER WASHERS
MATERIAL: Nylon 6/6 per ASTM D4066
MATERIAL: Fibre, Commercial Grade per ASTM D710
A
AL
C
B
A
A
L
C
B
CAT. SCREW
NO. L O.D. B I.D. S.D. SIZE
3229 .025 (.64) .250 (6.4) .047 (1.2) .093 (2.4) .123 (3.1) #2
3061 .025 (.64) .250 (6.4) .047 (1.2) .093 (2.4) .156 (4.0)
344 .015 (.38) .312 (7.9) .062 (1.57) .125 (3.2) .203 (5.2)
343 .025 (.64) .312 (7.9) .062 (1.57) .125 (3.2) .203 (5.2)
3062 .031 (.79) .250 (6.4) .031 (.79) .115 (2.9) .187 (4.7) #4
3230 .031 (.79) .281 (7.1) .062 (1.57) .115 (2.9) .175 (4.4)
3231 .031 (.79) .312 (7.9) .062 (1.57) .120 (3.1) .180 (4.6)
4698 .031 (.79) .250 (6.4) .062 (1.57) .140 (3.6) .187 (4.7)
3064 .031 (.79) .312 (7.9) .062 (1.57) .140 (3.6) .187 (4.7)
3232 .031 (.79) .375 (9.5) .062 (1.57) .140 (3.6) .210 (5.3) #6
3233 .031 (.79) .375 (9.5) .062 (1.57) .140 (3.6) .240 (6.1)
3234 .031 (.79) .500 (12.7) .062 (1.57) .140 (3.6) .240 (6.1)
3065 .031 (.79) .375 (9.5) .062 (1.57) .170 (4.3) .246 (6.2)
3066 .031 (.79) .417 (10.6) .062 (1.57) .170 (4.3) .210 (5.3)
3235 .031 (.79) .312 (7.9) .062 (1.57) .170 (4.3) .218 (5.5) #8
3236 .031 (.79) .375 (9.5) .062 (1.57) .170 (4.3) .215 (5.5)
3237 .031 (.79) .500 (12.7) .062 (1.57) .170 (4.3) .240 (6.1)
4702 .031 (.79) .375 (9.5) .062 (1.57) .194 (4.9) .308 (7.8)
3238 .031 (.79) .375 (9.5) .062 (1.57) .194 (4.9) .240 (6.1) #10
3239 .031 (.79) .500 (12.7) .062 (1.57) .196 (5.0) .240 (6.1)
4711 .031 (.79) .500 (12.7) .062 (1.57) .253 (6.4) .308 (7.8) .250-20
3240 .031 (.79) .625 (15.9) .062 (1.57) .265 (6.7) .359 (9.1)
3069 .031 (.79) .625 (15.9) .062 (1.57) .385 (9.8) .498 (12.6) .375-24
3241 .031 (.79) .750 (19.1) .062 (1.57) .385 (9.8) .498 (12.6)
CAT. SCREW
NO. L O.D. B I.D. S.D. SIZE
7680 .025 (.64) .260 (6.6) .030 (.76) .095 (2.4) .154 (3.9)
3051 .125 (3.2) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1)
3101 .187 (4.8) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1) #2
3052 .250 (6.4) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1)
3049* .031 (.79) .218 (5.5) .040 (1.0) .115 (2.9) .135 (3.4)
7681 .047 (1.2) .250 (6.4) .032 (.81) .115 (2.9) .185 (4.7)
3053 .093 (2.4) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7) #4
3102 .125 (3.2) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7)
3103 .187 (4.7) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7)
340 .250 (6.4) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7)
7682 .032 (.81) .385 (9.8) .062 (1.57) .145 (3.7) .240 (6.1)
7683 .032 (.81) .250 (6.4) .062 (1.57) .140 (3.6) .187 (4.7)
7684 .032 (.81) .312 (7.9) .062 (1.57) .140 (3.6) .187 (4.7)
3054 .125 (3.2) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3) #6
3104 .187 (4.7) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3)
341 .250 (6.4) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3)
3055 .500 (12.7) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3)
7685 .032 (.81) .375 (9.5) .032 (.81) .171 (4.3) .250 (6.4)
3056 .140 (3.6) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2)
3105 .250 (6.4) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2) #8
342 .375 (9.5) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2)
3106 .500 (12.7) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2)
7686 .032 (.81) .375 (9.5) .062 (1.57) .196 (5.0) .308 (7.8)
3107 .093 (2.36) .438 (11.1) .062 (1.57) .200 (5.1) .260 (6.6)
3108 .250 (6.4) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6) #10
3057 .500 (12.7) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6)
3058 .750 (19.1) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6)
7687 .032 (.81) .437 (11.1) .032 (.81) .253 (6.4) .310 (7.9)
7688 .078 (1.98) .492 (12.7) .032 (.81) .260 (6.7) .312 (7.9)
3059 .187 (4.7) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9) .250-20
3109 .250 (6.4) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9)
3110 .375 (9.5) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9)
3060 .500 (12.7) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9)
STEEL NYLON
CAT. NO. CAT. NO. HEX THREAD
4694 — 187 (4.7)
9600 9605 .250 (6.4) 4-40
4701 — .250 (6.4) 6-32
9602 9606 .312 (7.9)
9603 — .250 (6.4) 8-32
9604 9607 312 (7.9)
4705 9608 .375 (9.5) 10-32
4713 — .430 (10.9) .250-28
4716 — .500 (12.7) .312-24
STEEL NYLON
CAT. NO. CAT. NO. HEX THREAD
4707 4687 5.00 mm M2.5
4708 4688 5.50 mm M3
4709 4689 7.00 mm M4
* Black
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
MACHINE SCREWS
MACHINE SCREWS
SELF TAPPING SCREWS METRIC SCREWS
STAINLESS STEEL PAN HEAD SCREWS
Choice of: Steel, Zinc Plate • Nylon: 6/6, UL Rated 94V-2
STEEL NYLON 6/6
CAT. NO. LCAT. NO.
29301 6.00 29331
29304 12.00 29334
29306 16.00 29336
29311 6.00 29341
29314 12.00 29344
29316 16.00 29346
29318 25.00 29348
29321 6.00 29351
29324 12.00 29354
29326 16.00 29356
29328 25.00 29358
THREAD
L
MATERIAL: Stainless Steel
•Phillips drive pan head machine screws
CAT. L
NO. LENGTH THREAD
9900 .250 (6.4)
9901 .375 (9.5) 4-40
9902 .500 (12.7)
9903 .250 (6.4)
9904 .375 (9.5) 6-32
9905 .500 (12.7)
9906 .375 (9.5)
9907 .500 (12.7) 8-32
9908 .750 (19.1)
9909 .375 (9.5)
9910 .500 (12.7) 10-32
9911 .750 (19.1)
Suited for a variety of fastening applications to assure firm, electrical and
mechanical connections. Flat Head styles for use where fasteners cannot
protrude above mating surfaces. Pan Head style to replace round head
type for cosmetic enhancement and smooth surface area uses.
For Metric Hardware Refer to page 55.
MATERIAL: Steel, Zinc Plate (Non-RoHS Compliant)
Note: RoHS Compliant finishes available on special order
Nylon 6/6 (RoHS Compliant)
THREAD
L
THREAD
L
THREAD
L
Binding Head Flat Head Pan Head
Highly versatile screw, used in wood, fiberglass and
metal where machine thread inserts are not furnished.
THREAD LENGTH CAT. NO.
No. 4 .375 (9.5) 9575
.375 (9.5) 9576
No. 6 .500 (12.7) 9577
.375 (9.5) 9578
No. 8 .500 (12.7) 9579
.375 (9.5) 9580
No. 10 .500 (12.7) 9581
THREAD
L
•Slotted drive, hex head
MATERIAL: Steel, Zinc Plate (Non-RoHS Compliant)
Note: RoHS Compliant finishes available on special order
BINDING HEAD FLAT HEAD PAN HEAD
STEEL NYLON STEEL NYLON STEEL NYLON
THREAD LENGTH CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO.
.250 (6.4) 9455 — 9555 — 9355 —
2-56 .500 (12.7) 9456 — 9556 — 9356 —
.750 (19.1) 9457 — 9557 — 9357 —
.250 (6.4) 9400 9427 9500 9527 9300 9327
.375 (9.5) 9401 9428 9501 9528 9301 9328
4-40 .500 (12.7) 9402 9429 9502 9529 9302 9329
.625 (15.9) 9403 9430 9503 9530 9303 9330
.750 (19.1) 9404 9431 9504 9531 9304 9331
1.000 (25.4) 9405 9432 9505 9532 9305 9332
.187 (4.7) 9406 9433 9506 9533 9306 9333
.250 (6.4) 9407 9434 9507 9534 9307 9334
.375 (9.5) 9408 9435 9508 9535 9308 9335
.500 (12.7) 9409 9436 9509 9536 9309 9336
6-32 .625 (15.9) 9410 9437 9510 9537 9310 9337
.750 (19.1) 9411 9438 9511 9538 9311 9338
1.000 (25.4) 9412 9439 9512 9539 9312 9339
1.250 (31.8) 9413 9440 9513 9540 9313 9340
2.000 (50.8) 9414 9441 9514 9541 9314 9341
.250 (6.4) 9416 9443 9516 9543 9316 9343
.375 (9.5) 9417 9444 9517 9544 9317 9344
.500 (12.7) 9418 9445 9518 9545 9318 9345
8-32 .625 (15.9) 9419 9446 9519 9546 9319 9346
.750 (19.1) 9420 9447 9520 9547 9320 9347
1.000 (25.4) 9421 9448 9521 9548 9321 9348
1.250 (31.8) 9422 9449 9522 9549 9322 9349
.500 (12.7) 9423 9450 9523 9550 9323 9350
10-32 .750 (19.1) 9424 9451 9524 9551 9324 9351
1.000 (25.4) 9425 9452 9525 9552 9325 9352
1.500 (38.1) 9426 9453 9526 9553 9326 9353
BINDING HEAD SCREWS – COLORED HEAD
Ideal for quick identification of screw terminal. Reduces errors in wirng of cables.
See pages 62-65 for screw terminals with colored screws installed. Only head is
painted, provides reliable electrical contact to terminal.
THREAD
MATERIAL: Brass, Nickel Plate with
Painted Color Head
THREAD
L
CAT. NO. CAT. NO.
M3 × HEAD 6-32 ×
6mm L COLOR .250 (6.3) L
7689-1 NICKEL 8190-1
9191-2 RED 9190-2
9191-3 BLACK 9190-3
9191-4 WHITE 9190-4
9191-5 BLUE 9190-5
9191-6 GREEN 9190-6
9191-7 YELLOW 9190-7
133
M2.5 THREAD
M3 THREAD
M4 THREAD
EYELETS & RIVETS
134
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
WIDE ROLL EYELETS
SEMI-TUBULAR RIVETS
SNAP RIVETS
D
L
B
A
AB
L
D
DWG. 1 DWG. 2
CAT. T L D A B MTG.
NO. DWG. PANEL THICKNESS RIVET LENGTH RIVET DIAMETER HEAD DIAMETER HEAD HEIGHT HOLE SIZE
3440 1 .051/.079 (1.3/2.0) .130 (3.3)
3441 1 .083/.110 (2.1/2.8) .160 (4.0) .076 (1.9) .165 (4.2) .047 (1.2) .083/.087 (2.1/2.2)
3442 1 .114/.142 (2.9/3.6) .190 (4.8)
3443 2 .118/.157 (3.0/4.0) .220 (5.6)
3444 2 .146/.181 (3.7/4.6) .240 (6.1) .138 (3.5) .252 (6.4) .063 (1.6) .142/.146 (3.6/3.7)
3445 2 .177/.217 (4.5/5.5) .280 (7.1)
3446 2 .217/.256 (5.5/6.5) .310 (7.9)
3447 2 .177/.217 (4.5/5.5) .280 (7.1)
3448 2 .217/.256 (5.5/6.5) .310 (7.9) .158 (4.0) .315 (8.0) .071 (1.8) .161/.165 (4.1/4.2)
3449 2 .256/.295 (6.5/7.5) .350 (9.0)
3450 2 .295/.335 (7.5/8.5) .390 (10.0)
As Installed
T
Attach panels and mounting hardware without
any tooling. Leaves a clean cosmetic look once
installed. Can be installed without access to
underside. Removable so assembly can be
easily repaired or upgraded.
MATERIAL: Nylon 6/6, UL Rated 94V-2, Black
A choice of the most
popular sizes in use for
PC board and electronic
assembly applications.
MATERIAL: Brass, Bright Electro
Tin, MIL-T-10727. Other platings
can be furnished.
C
B
A
.312 [7.9]
O.D.
TOP TOOL
.312 [7.9]
O.D.
BOTTOM TOOL
STAKING TOOLS
Set consisting of top and bottom tool.
Made from Tool Steel and highly polished.
MATERIAL: Brass, Nickel Plate
These standardized brass rivets typify the
scope and variety of popular rivets that will
provide faster and stronger assemblies at
lower cost. We suggest you rivet and test a
sample before purchasing large quantities for
your application.
A
B
H
BAH
MTG.
CAT. NO. LENGTH UNDER HEAD SHANK DIAMETER HEAD DIAMETER HOLE SIZE
3381 .125 (3.2) .067(1.70) Dia.
3382 .156 (3.9) .060 (1.55) .109 (2.8) USE DRILL #51
3383 .187 (4.8)
3384 .156 (3.9)
3385 .187 (4.8) .087 (2.21) .093 (2.36) Dia.
3386 .218 (5.5) .147 (3.7) USE DRILL #42
3387 .250 (6.4)
3388 .156 (3.9)
3389 .187 (4.8) .120 (3.06) .218 (5.5) .128 (3.25) Dia.
3390 .218 (5.5) USE DRILL #30
3391 .250 (6.4)
A B STAKING
OUTSIDE LENGTH C MTG. TOOL
CAT. DIAMETER UNDER FLANGE HOLE CAT.
NO. BARREL FLANGE DIAMETER SIZE NO.
22 .062 (1.57)
23 .093 (2.36) .062 (1.57)
24 .059 (1.49) O.D. .125 (3.18) .105 (2.7) USE DRILL 3075
25 .045 (1.14) I.D. .156 (3.96) #51
26 .187 (4.75)
27 .219 (5.56)
33 .093 (2.36)
34 .125 (3.18) .093 (2.36)
35 .089 (2.26) O.D. .156 (3.96) .150 (3.8) USE DRILL 3076
36 .070 (1.78) I.D. .187 (4.75) #42
37 .219 (5.56)
43 .093 (2.36)
44 .125 (3.18)
.125 (3.18)
45 .121 (3.07) O.D. .156 (3.96) .200 (5.1) USE DRILL 3077
46 .102 (2.59) I.D. .187 (4.75) #30
47 .219 (5.56)
48 .250 (6.35)
14 .125 (3.18) .156 (3.96)
15 .152 (3.86) O.D. .156 (3.96) .245 (6.2) USE DRILL 3079
16 .132 (3.35) I.D. .187 (4.75) 5/32”
17 .219 (5.56)
STAKING TOOL KITS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
INDIVIDUAL TOOLS“BASIC” STAKING KIT
“MASTER” STAKING KIT
“IMPACT” STAKING KIT
This kit provides all of the components needed to stake most terminals, standoffs, eyelets or rivets.
This kit also includes sprung receding pins so that eyelets can be prealigned for easy assembly of
componets. Kit supplied in convenient plastic case for ease of use.
All that is required to stake almost all swage components. Just press down and it stakes. Tools pro-
vided allow bench top staking with out setting up arbor or drill press. Staking tool can be adjusted
This kit provides the basic components needed to stake a majority of our most popular sizes of
eyelets, rivets and terminals. The unskilled operator can produce profesional looking assemblies
quickly and with minimal training.
TOP SETTING TOOLS (Swager)
For Single End Terminals, Eyelets or Rivets
For Doube End (Feed-Thru)
Hole in tool fits over Pin head and
securely stakes the rivet part of terminal.
BOTTOM ANVILS
For Single End Terminals or Double End Terminals
Anvils have different size holes in each end therefore
will accept 2 sizes of Pins of either Single or Double
end Turret type Terminals.
ANVILS FOR FORK TERMINALS
Accepts Diameter of 3/32 to 5/32 at one end
and diamter of 3/16 other end .040 (1.0) slot
one end and .060 (1.52) slot at other end.
CAT. NO. 1726
ANVILS FOR SWAGE SPACERS
TOOL HOLDERS
Tool holders will hold all .250 (6.4) diameter anvils.
May be used with receding pin and return spring to
hold eyelets in place during the staking process.
CAT. NO. 1719
AB
CAT. NO. DIA. DIA.
1722 .053 (1.35) .065 (1.65)
1716 .070 (1.78) .100 (2.54)
1717 .128 (3.25) .152 (3.86)
CAT. NO. FOR SHANK DIA.
1714 .062 (1.57) to .098 (2.49)
1715 .110 (2.8) to .125 (3.2)
1328 .130 (3.3) to .140 (3.6)
1324 .180 (4.5) to .190 (4.8)
CAT. NO. FOR PIN ON RIVET END
1304 .051 (1.30) Hole Dia.
1305 .063 (1.60) Hole Dia.
1306 .073 (1.85) Hole Dia.
1307 .086 (1.49) Hole Dia.
1324 .098 (2.49) Hole Dia.
CAT. NO. CONSISTS OF ONE EACH:
1714 Top Setting Tool
1715
1719 Anvil Holder
1716 Bottom Anvil
1717
CAT. NO. CONSISTS OF ONE EACH:
1714
1715
1304
1305 Top Swaging Tool
1306
1307
1324
1719 Anvil Holder
1325 Anvil for 6-32 Standoffs
1326
1716 Anvil for Turret Terminals
1717
1722
1726 Anvil for Fork Turret Terminals
1315 Receding Pin - .045 (1.15) Dia.
1316 Receding Pin - .069 (1.75) Dia.
1321 Return Spring for Receding Pins
CAT. NO. CONSISTS OF ONE EACH:
TOOLS
1302 Impact Handle
1300 Anvil Tool Holder Base
SWAGING TOOLS
1312 .040 (1.02) to .072 (1.83)
1313 .078 (1.98) to .093 (2.36)
SWAGING TOOLS FOR DOUBLE ENDED TURRET
1310 .053 (1.35) Diameter Hole
1311 .062 (1.57) Diameter Hole
ANVIL COMPENTS
1716
1717 Anvil for Turret Terminals
1722
1726 Anvil for Fork Turret Terminals
1315 Receding Pin - .045 (1.15) Dia.
1316 Receding Pin - .069 (1.75) Dia.
1321 Return Spring for Receding Pins
1/4” Diameter Tools
B DIA.
A DIA.
.750
[19.0]
.250 [6.4]
to provide heavy to light blows. Receding sprung pins can be assembled into anvil to locate
eyelets for easy assembly of components. Kit supplied in convenient plastic case for ease of use.
CAT. NO. BUSHING SIZE
1326
Holds Bushing with 5/32” O.D.
1325
For Bushing with 6-32” Thread
1309
For Bushing with 4-40 Thread
.250 [6.4]
DIA.
.750
[19.0]
.065 [1.7] SLOT
.042 [1.1] SLOT
135
CAT. NO. 1721 COMPLETE KIT
CAT. NO. 1713 COMPLETE KIT
CAT. NO. 1707 COMPLETE KIT
EYELET
DIA.
RIVET
DIA.
SHANK
DIA.
EYELET
DIA.
RIVET
DIA.
EYELET
DIA.
RIVET
DIA.
SHANK
DIA.
SHANK
DIA.
PTFE INSULATED TERMINALS & PINS
136
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
PTFE INSULATED TERMINALS & PINS
PINS SOLDER TERMINALS
HOLLOW PIN
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
•Space saving design for high
density packaging
•Outstanding Electrical, Mechanical,
Thermal and Chemical properties
•Provides greater pull-out strength
and high torque resistance
•Ideal for high quality terminal
and connector applications
•Custom PTFE jacks manufactured to
your specifications
•Other platings and bushing colors
available upon request
Mtg. Hole
Dia.
.012 [.30]
60°
.062 [1.57]
Mounting Detail
CAT. NO. A B C E Mtg. Hole Dia.
11065 .125 (3.2) .104 (2.6) .089 (2.3) .161 (4.1) .091 (2.3)
11066 .125 (3.2) .093 (2.4) .100 (2.5) .925 (23.5) .086 (2.2)
11067 .172 (4.4) .148 (3.8) .100 (2.5) .150 (3.8)
11068 .172 (4.4) .148 (3.8) .075 (1.9) .185 (4.7)
11069 .172 (4.4) .148 (3.8) .050 (1.3) .260 (6.6)
11070 .172 (4.4) .148 (3.8) .075 (1.9) .260 (6.6) .136 (3.5)
11071 .172 (4.4) .148 (3.8) .100 (2.5) .250 (6.4)
11072 .172 (4.4) .148 (3.8) .160 (4.1) .250 (6.4)
11073 .172 (4.4) .148 (3.8) .100 (2.5) .490 (12.4)
11074 .172 (4.4) .148 (3.8) .100 (2.5) .585 (14.9)
.040 [1.0]
A
E
C
B
Top
Mount
CAT. NO. 11075 CAT. NO. 11076
Bottom
Mount
Mtg. Hole
.113 (2.9) Dia.
Mtg. Hole
.136 (3.5) Dia.
.125 [3.2]
.150 [3.8]
.025 [.64]
.045 [1.1]
.032 [8.1] DIA
HOLE THRU.
.075 [1.9]
.125 [3.2]
.190 [4.8]
.148 [3.8]
.172 [4.4]
.040 [1.0]
.040 [1.0]
.120 [3.0]
PIN
PIN
PIN-TO-PIN
B
A
C
R
F
E
Feed-Thru
Mtg. Hole
CAT. NO. A B C E F R Dia.
11150 .093 (2.4) .075 (1.9) .100 (2.5) .315 (8.0) .550 (13.9) .030 (7.6) .069 (1.8)
11151 .125 (3.2) .093 (2.4) .100 (2.5) .196 (5.0) .453 (11.5) .040 (1.0)
11152 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .515 (13.1) .040 (1.0) .086 (2.2)
11153 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .443 (11.3) .040 (1.0)
11154 .150 (3.8) .125 (3.2) .100 (2.5) .250 (6.4) .443 (11.3) .040 (1.0) .113 (2.9)
11155 .172 (4.4) .148 (3.8) .100 (2.5) .250 (6.4) .515 (13.1) .040 (1.0)
11156 .172 (4.4) .148 (3.8) .110 (2.8) .260 (6.6) .535 (13.6) .040 (1.0)
11157 .172 (4.4) .148 (3.8) .250 (6.4) .250 (6.4) .710 (18.0) .040 (1.0) .136 (3.5)
11158 .172 (4.4) .148 (3.8) .250 (6.4) .303 (7.7) .719 (18.3) .040 (1.0)
11159 .172 (4.4) .148 (3.8) .160 (4.1) .250 (6.4) .725 (18.4) .040 (1.0)
11160 .172 (4.4) .148 (3.8) .170 (4.3) .250 (6.4) .630 (16.0) .040 (1.0) CAT. NO. 11218
.171 [4.3]
.312 [7.9]
.173 [4.4]
.093 [2.4]
.196 [5.0]
.171 [4.3]
.172 [4.4]
.200 [5.1]
.180 [4.6]
.125 [3.2]
.195 [5.0]
.090 [2.3]
.040
[1.00]
B
E
C
A
R
A
B
C
E
R
AE
C
B
R
CAT. NO. 11250 CAT. NO. 11251
.100 [2.5]
.075 [1.9]
.060 [1.5]
.140 [3.6]
.270 [6.9]
.030 [.81]
.093 [2.4]
FIG. 1 FIG. 2 FIG. 3
Bottom
Mount
Feed-Thru
Feed-Thru Feed-Thru
CAT. NO. FIG. A B C E R Mtg. Hole Dia.
11300 1 .125 (3.2) .093 (2.4) .100 (2.5) .210 (5.3) .060 (1.5) .086(2.2)
11301 1 .125 (3.2) .093 (2.4) .080 (2.0) .250 (6.4) .080 (2.0) .086 (2.2)
11302 1 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .080 (2.0) .086(2.2)
11303 1 .172 (4.4) .148 (3.8) .140 (3.6) .194 (4.9) .093 (2.4) .136 (3.5)
11304 1 .172 (4.4) .148 (3.8) .110 (2.8) .250 (6.4) .080 (2.0) .136 (3.5)
11305 1 .172 (4.4) .148 (3.8) .125 (3.2) .303 (7.7) .080 (2.0) .136 (3.5)
11306 1 .172 (4.4) .148 (3.8) .165 (4.2) .290 (7.4) .093 (2.4) .136 (3.5)
11307 1 .172 (4.4) .148 (3.8) .250 (6.4) .290 (7.4) .093 (2.4) .136 (3.5)
11308 1 .172 (4.4) .148 (3.8) .165 (4.2) .437 (11.1) .093 (2.4) .136 (3.5)
11320 2 .172 (4.4) .148 (3.8) .100 (2.5) .150 (3.8) .080 (2.0) .136 (3.5)
11321 2 .187 (4.8) .164 (4.2) .150 (3.8) .370 (9.4) .090 (2.3) .152 (3.9)
11322* 2 .150 (3.8) .125 (3.2) .110 (2.8) .180 (4.6) .090 (2.3) .113 (2.9)
11310 2 .125 (3.2) .093 (2.4) .100 (2.5) .170 (4.3) .060 (1.5) .086(2.2)
11311 3 .172 (4.4) .148 (3.8) .100 (2.5) .210 (5.3) .080 (2.0) .136 (3.5)
11312 3 .187 (4.8) .171 (4.3) .155 (3.9) .210 (5.3) .080 (2.0) .158 (4.0)
*Hollow Turret
Mtg.
CAT. Hole
NO. C E R Dia.
11216 .100 .250 .080
(2.5) (6.4) (2.0) .136
11217 .230 .375 .093 (3.5)
(5.8) (9.5) (2.4) Mtg. Hole
.066 (1.7)Dia.
Mtg. Hole
.158 (4.0) Dia.
Mtg. Hole
.158 (4.0) Dia.
.172 [4.4]
R
E
C
.148 [3.8]
.040 [1.0]
TURRET
TURRET-TO-TURRET
Top
Mount
TURRET-TO-PIN
CAT. NO. 11362
THREADED FEED - THRU TERMINALS
MOLDED DIALLYL PHTHALATE INSULATED THREADED TERMINALS
FIG. 1
SPLIT-TYPE FORK TURRETS
.156 [4.0] HEX
E
.235 [6.0]
.032 [0.8] (2) PLS.
L
4-40 THREAD
.095 [2.4]
NUT
LOCKWASHER
HEX
THREAD
R
E
.250 [6.4]
L
NUT
LOCKWASHER
B
A
C
R
E
CAT. NO. EL
11360 .328 (8.3) .200 (5.1)
11361 .378 (9.6) .250 (6.4)
THREADED TURRET TERMINALS
R
L
THREAD
HEX E
C
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
CAT. NO. Thread Hex C E L R
11350 2-56 .156 (3.9) .206 (5.2) .360 (9.1) .125 (3.2) .062 (1.6)
11351 4-40 .250 (6.4) .270 (6.9) .510 (12.9) .250 (6.4) .094 (2.4)
11352 6-32 .250 (6.4) .270 (6.9) .510 (12.9) .375 (9.5) .094 (2.4)
CAT. NO. Thread Hex E L R
11363 10-32 .312 (7.9) .425 (10.8) .565 (14.3) .062 (1.6)
11364 6-32 .188 (4.8) .368 (9.3) .510 (12.9) .040 (1.0)
12-28 THREAD
.250 [6.4] HEX
.082 [2.1]
.287 [7.3]
.225 [5.7]
.403 [10.2]
.062 [1.6]
NUT
LOCKWASHER
FIG. 2
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
Body: Brass, Nickel Plate
A
B
R
.821
[20.9]
E
C
FORK FORK-TO-TURRET
CAT. FIG. Mtg. Hole
NO. NO. A B C E R Dia.
11100 1 .172 (4.4) .148 (3.8) .125 (3.2) .250 (6.4) .125 (3.2) .136 (3.5)
11111 1 .187 (4.8) .171 (4.3) .150 (3.8) .390 (9.9)
11112 1 .187 (4.8) .171 (4.3) .150 (3.8) .453 (11.5)
11113 1 .187 (4.8) .171 (4.3) .150 (3.8) .328 (8.3) .148 (3.8) .158 (4.0)
11114 1 .187 (4.8) .171 (4.3) .150 (3.8) .390 (9.9)
11115 1 .187 (4.8) .171 (4.3) .150 (3.8) .453 (11.5)
11116 2 .187 (4.8) .171 (4.3) .212 (5.4) .390 (9.9)
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
Body: Brass, Nickel Plate
SPECIFICATIONS
Terminal: Brass, Tin Plate
Bushing: White PTFE
Body: Brass, Nickel Plate
MATERIAL:
Terminal: Brass, Tin Plate
Insulator: Blue Molded Diallyl Phthalate, SDGF
Base: Brass, Tin Plate
R
2-56 THREAD
.047 [1.2]
.156 [4.0] HEX
.146 [3.7]
L
E
B
.156 [4.0] HEX
L
.072 [1.8]
.047 [1.2]
.146 [3.7] .156 [4.0]
B
2-56 THREAD
L
.062 [1.6]
.250 [6.4] HEX.
.232 [5.9]
R
E
B
4-40 THREAD
Properties:
• High Dielectric Breakdown
• Continuous Use Temperature up to 350F (176 C)
• UL 94 V-O Rated
• Other platings and insulator colors available upon request
CAT. NO. BELR
11500 .235 (6.0) .156 (4.0) .125 (3.2) .072 (1.8)
11501 .235 (6.0) .218 (5.5) .125 (3.2) .072 (1.8)
11502 .235 (6.0) .218 (5.5) .187 (4.8) .072 (1.8)
CAT. NO. LB
11510 .078 (2.0) .235 (5.9)
11511 .117 (3.0) .391 (9.9)
CAT. NO. BELR
11512 .375 (9.5) .219 (5.6) .156 (4.0) .093 (2.4)
11513 .594 (15.1) .344 (8.7) .219 (5.6) .140 (3.6)
SINGLE TURRET
TO FEMALE THREAD
DOUBLE TURRET
TO FEMALE THREAD
SINGLE TURRET
TO MALE THREAD
Nut and washer supplied unassembled
Nut and washer supplied unassembled
Nut and washer supplied unassembled
INSULATED TERMINALS
137
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
TURRET TERMINALS
138
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
TURRET TERMINALS
SINGLE, DOUBLE & TRIPLE TURRET
ORDERING INFORMATION
•
Single, double and triple turrets
•
Double-ended (feed-thru)
•Split-type (fork)
•Tubular (hollow)
•
Swage and thread mounting types available
•
Bright Tin plated for extended shelf life and
excellent solderability
•
Wide variety of sizes to suit space and wire
size requirements
STYLES
SPECIFICATIONS
MATERIAL: Brass - Per ASTM-B16, Bright Electro-Tin per MIL-T-10727 Type 1.
Other platings available upon request.
SPECIAL TERMINALS
Custom terminals can be manufactured to your specifications. Complete facilities available to meet your
production requirements. Quotations on special terminals furnished promptly upon receipt of sample,
sketch or print.
CUSTOM BUILT TERMINAL BOARDS
We are specialists in the assembly of terminals, eyelets, clips and special hardware. Quotations on special
terminal boards furnished promptly upon receipt of sample, sketch or print. Assembly service using
customer supplied materials also available. (Refer to pages 130-132 for standard terminal boards.)
STAKING TOOLS
For easy mounting of terminals to insulators and PC boards. Standard and
“special order” staking tools are available. Cat. No. “TL” designates a tool
consisting of a TOP STAKING PUNCH and a BOTTOM ANVIL. Manufactured
from steel with zinc plate. Punch and anvil are precision machined and
hardened to insure long life. Refer to page 135.
CUSTOM BUILT STAKING TOOLS
Custom prototype and production staking tools can be furnished for Single-End,
Double-End, Fork Terminals, Extruded Lugs, Eyelets, Rivets, etc. Contact our
Engineering Department for details.
Keystone standardized terminals are available for various board thicknesses.
To specify a terminal, select the “CAT. NO.” and “DASHED NUMBER” that corresponds with the board
thickness to be used.
DASH NUMBERS (Board Thicknesses)
-1 for .032 (.81) thick Board
-2 for .062 (1.57) thick Board
-3 for .093 (2.36) thick Board
-4 for .125 (3.2) thick Board
Example: 1503-1 for .032 (.81) thick Board
1503-2 for .062 (1.57) thick Board
1508 15721528 1520
1573 1502 1514
1532
1598 1527
1503
1587
THREADED TURRETS
1595
1593
1563
CAT. NO. 1563
Staking Tool No. TL-8Staking Tool No. TL-5Staking Tool No. TL-2Staking Tool No. TL-1Staking Tool No. TL-1
Staking Tool No. TL-8Staking Tool No. TL-2
L
.062 [1.57]
.047 [1.19]
.093 [2.36]
.040 [1.02]
.094 [2.39]
.063 [1.60]
.062 [1.57]
.093 [2.3
6
L
.093 [2.36]
L
.072 [1.83]
.104 [2.7]
.050 [1.27]
.187
[4.8]
.075 [1.90]
.078 [1.98]
L
.125 [3.2] .187 [4.8]
.234
[6.0]
.145 [3.7]
.112 [2.9]
L
.062 [1.57]
.062 [1.57]
.094 [2.39]
L
.156 [4.0] .093 [2.36]
L
.072 [1.83]
.186
[4.7] .125 [3.2]
.093 [2.36]
L
.219
[5.6]
.090 [2.29]
.281
[7.2]
.156 [4.0]
L
.109 [2.8]
.090 [2.29]
.360
[9.2]
.145 [3.7]
L
.112 [2.9]
.187 [4.8]
.125 [3.2]
.301
[7.7]
.090 [2.29]
L
.093 [2.36]
.484
[12.3]
.187 [4.8]
.145 [3.7]
L
.112 [2.9] .156 [4.0]
.125 [3.2]
.093 [2.4]
DIA.
.043 [1.09]
DIA. THRU
4-40
THREAD
.125 [3.2]
HEX. L
.187 [4.8]
.075 [1.9]
DIA.
2-56
THREAD
L
.360
[9.2]
4-40
THREAD
.145 [3.7]
DIA.
.187 [4.8]
HEX.
Staking Tool No. TL-1Staking Tool 1528-TL Staking Tool No.TL-1 Staking Tool No. TL-2 Staking Tool No. TL-8
CAT. NO. L
1528-1
.051 (1.30)
1528-2
.082 (2.08)
1528-3
.113 (2.8)
1528-4
.145 (3.6)
CAT. NO. L
1508-1
.053 (1.35)
1508-2
.084 (2.13)
1508-3
.115 (2.9)
1508-4
.147 (3.7)
CAT. NO. L
1572-1
.051 (1.30)
1572-2
.082 (2.08)
1572-3
.113 (2.8)
1572-4
.145 (3.6)
CAT. NO. L
1520-1
.078 (1.98)
1520-2
.109 (2.8)
1520-3
.141 (3.5)
1520-4
.172 (4.4)
CAT. NO. L
1532-1
.078 (1.98)
1532-2
.109 (2.8)
1532-3
.141 (3.5)
1532-4
.172 (4.4)
CAT. NO. L
1503-1
.078 (1.98)
1503-2
.109 (2.8)
1503-3
.141 (3.5)
1503-4
.172 (4.4)
CAT. NO. L
1514-1
.078 (1.98)
1514-2
.109 (2.8)
1514-3
.141 (3.5)
1514-4
.172 (4.4)
CAT. NO. L
1502-1
.078 (1.98)
1502-2
.109 (2.8)
1502-3
.141 (3.5)
1502-4
.172 (4.4)
CAT. NO. L
1573-1
.051 (1.30)
1573-2
.082 (2.08)
1573-3
.113 (2.8)
1573-4
.145 (3.6)
CAT. NO. L
1593-1
.054 (1.37)
1593-2
.084 (2.13)
1593-3
.115 (2.9)
1593-4
.147 (3.7)
CAT. NO. L
1598-1 .062 (1.57)
1598-2 .094 (2.39)
1598-3 .125 (3.2)
1598-4 .156 (3.9)
CAT. NO. L
1527-1 .078 (1.98)
1527-2 .109 (2.8)
1527-3 .141 (3.5)
1527-4 .172 (4.4)
CAT. NO. L
1595-1
.093 (2.36)
1595-2
.125 (3.2)
1595-3
.188 (4.8)
CAT. NO. L
1587-1
.125 (3.2)
1587-2
.188 (4.8)
TURRET TERMINALS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
DOUBLE-ENDED TURRETS
SPLIT-TYPE (FORK) TURRETS
139
1515 1533 1526 1592
1510 1525 1507
Staking Tool Special Order
1557
Staking Tool No. TL-9
Staking Tool No. TL-9
L
.046 [1.17]
DIA.
.156 [4.0]
.062 [1.57]
DIA.
.025 [.64]
SLOT
.025 [.63]
DIA. THRU
.060 [1.52]
DIA.
.093 [2.36]
DIA.
.040 [1.02]
SLOT
.156 [4.0]
L
.043 [1.09]
DIA. THRU
.062 [1.57]
DIA.
.094 [2.39]
DIA.
L
.156 [4.0]
.043 [1.09]
DIA. THRU
.024 [.61]
.064 [1.63]
DIA.
.156 [4.0]
L
.093 [2.36]
DIA.
.030 [.76]
SLOT
.125 [3.2]
DIA. .043 [1.09]
DIA. THRU
.035
[.89]
.090 [2.29]
DIA.
.243
[6.2]
L
.125 [3.2]
DIA.
KNURL
.063 [1.60]
DIA. THRU
.112 [2.84]
DIA.
.312
[7.9]
L
.050
[1.27]
KNURL
.081 [2.06]
DIA. THRU
.156 [3.96]
DIA.
.343
[8.7]
L
.032
[.81]
.112 [2.84]
DIA.
.070 [1.78]
DIA. THRU
.156 [3.96]
DIA.
KNURL
.375
[9.6]
L
.062 [1.57]
SLOT
.081 [2.06]
DIA. THRU
KNURL
.142 [3.61]
DIA.
.150 [3.81]
DIA.
.188 [4.78]
DIA.
Staking Tool 1515-TL
Staking Tool Special Order
Staking Tool No. TL-3 Staking Tool No. TL-2
Staking Tool No. TL-3
Staking Tool No. TL-9
CAT. NO. L
1533-2 .084 (2.13)
1533-3 .115 (2.9)
1533-4 .147 (3.7)
CAT. NO. L
1526-1 .054 (1.37)
1526-2 .084 (2.13)
1526-3 .115 (2.9)
1526-4 .147 (3.7)
CAT. NO. L
1592-1 .051 (1.30)
1592-2 .082 (2.08)
1592-3 .113 (2.8)
1592-4 .145 (3.6)
CAT. NO. L
1511-2 .109 (2.8)
1511-3 .141 (3.5)
1511-4 .172 (4.4)
CAT. NO. L
1510-2 .109 (2.8)
1510-3 .141 (3.5)
1510-4 .172 (4.4)
CAT. NO. L
1525-2 .109 (2.8)
1525-3 .141 (3.5)
1525-4 .172 (4.4)
CAT. NO. L
1507-2 .109 (2.8)
1507-3 .141 (3.5)
1507-4 .172 (4.4)
CAT. NO. L
1557-2 .109 (2.8)
1557-3 .141 (3.5)
1557-4 .172 (4.4)
CAT. NO. L
1515-1 .058 (1.47)
1515-2 .089 (2.26)
1515-3 .120 (3.1)
1515-4 .150 (3.8)
.328
[8.4]
.188 [4.78]
DIA.
.051
[1.30]
.079 [2.01]
DIA. THRU
KNURL L
.112 [2.84]
DIA.
SPECIAL
TURRET
TERMINALS
Custom turret terminals can
be machined to your exact
specifications. Standard and
special terminals can be staked
onto special boards. Please
email/fax your design to our
Engineering Department.
1562 1559 1633 1574
1540 1519 1613 1575
1582 1509 1583 1545
Staking Tool Special Order
Staking Tool No. TL-2 Staking Tool No. TL-2 Staking Tool No. TL-4
Staking Tool No. TL-4
Staking Tool No. TL-4
Staking Tool No. TL-4
Staking Tool No. TL-12
Staking Tool No. TL-8
Staking Tool No. TL-5
TUBULAR TURRETS
.125 [3.2]
L
.062 [1.57]
.156 [4.0]
.093 [2.36]
.043 [1.09]
DIA. THRU
.071 [1.80]
.097 [2.5]
L
.187 [4.8]
.043 [1.09]
DIA. THRU
.125 [3.2]
.061 [1.55]
.078 [1.98]
.032 [.81]
DIA.
.045 [1.14]
.140 [3.6]
.076 [1.93]
L
.093 [2.36]
.104 [2.7]
.072 [1.83]
.050 [1.27]
(2) PLS
L
.082 [2.08]
L
.090 [2.29]
.266 [6.8]
.120 [3.1]
.064 [1.63]
DIA. THRU
.156 [4.0]
.110 [2.8]
.140 [3.6]
.187 [4.8]
L
.188 [4.8]
.067 [1.70]
DIA. THRU
.050 [1.27]
(3) PLS
.062 [1.57]
.093 [2.36]
.082 [2.08]
.186 [4.7]
L
.072 [1.83]
.186 [4.7]
.082 [2.08]
.050 [1.27]
(3) PLS
L
.093 [2.36]
.187 [4.75]
.112 [2.84] .312
[7.9]
.360
[9.2]
.145 [3.68]
(2) PLS
.082 [2.08]
(2) PLS
L
.164 [4.17]
.186 [4.72]
.072 [1.83]
L
.050 [1.27]
(4) PLS
.093 [2.36]
.187 [4.8]
L
.112 [2.9]
.312 [7.9]
.150 [3.8]
.078 [1.98]
DIA. THRU
.156 [4.0]
L
.078 [1.98]
.328 [8.4]
.109 [2.8]
.055 [1.40]
DIA. THRU
CAT. NO. L
1509-1 .078 (1.98)
1509-2 .109 (2.8)
1509-3 .141 (3.5)
1509-4 .172 (4.4)
CAT. NO. L
1562-1 .054 (1.37)
1562-2 .084 (2.13)
1562-3 .115 (2.9)
1562-4 .147 (3.7)
CAT. NO. L
1559-1 .062 (1.57)
1559-2 .094 (2.39)
1559-3 .125 (3.2)
1559-4 .156 (3.9)
CAT. NO. L
1633-1 .051 (1.30)
1633-2 .082 (2.08)
1633-3 .113 (2.8)
1633-4 .145 (3.6)
CAT. NO. L
1574-1 .051 (1.30)
1574-2 .082 (2.08)
1574-3 .113 (2.8)
1574-4 .145 (3.6)
CAT. NO. L
1540-2 .107 (2.7)
1540-3 .141 (3.5)
1540-4 .172 (4.4)
CAT. NO. L
1519-1 .078 (1.98)
1519-2 .109 (2.8)
1519-3 .141 (3.5)
1519-4 .172 (4.4)
CAT. NO. L
1613-1 .051 (1.30)
1613-2 .082 (2.08)
1613-3 .113 (2.8)
1613-4 .145 (3.6)
CAT. NO. L
1575-1 .051 (1.30)
1575-2 .082 (2.08)
1575-3 .113 (2.8)
1575-4 .145 (3.6)
CAT. NO. L
1582-1 .075 (1.91)
1582-2 .105 (2.7)
1582-3 .135 (3.4)
1582-4 .165 (4.2)
CAT. NO. L
1583-1 .051 (1.30)
1583-2 .082 (2.08)
1583-3 .113 (2.8)
1583-4 .145 (3.6)
CAT. NO. L
1545-2 .105 (2.7)
1545-3 .135 (3.4)
1545-4 .165 (4.2)
Staking Tool No. TL-8
1511
Staking Tool No. TL-5
SCORED TURRET TERMINAL BOARDS
140
SCORED TURRET TERMINAL BOARDS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Cut your production cost by eliminating the tooling and setup charge usually applied to
non-standardized boards. Terminals are securely staked and tinned for easy soldering.
MATERIAL: Choice of either PBE or GEE.
PBE: Paper base electrical, MIL-1-24768/20, Type XP natural, Temp. 250°F (121°C) max.
GEE: Glass epoxy, MIL-I-24768/27, Type G-10, Temp. 300°F (155°C) max.
Terminals: Brass, ASTM-B16, Tin Plate, MIL-T-10727. Other platings can be furnished.
STANDARD TURRET TERMINAL BOARDS
.093 [2.36]
13.125 [333.4]
S
W
2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7]
.375 [9.5] .375 [9.5]
.187 [4.8]
.120 [3.1] DIA.
W
VIEW SHOWING SCORING
SW
1.562 [39.7]
VIEW SHOWING SCORING
.218 [5.6]
.125 [3.2]
.250 [6.4] .062 [1.57]
1.562 [39.7] 1.562 [39.7]
1.562 [39.7] 1.562 [39.7]
7.812 [198.4]
W
.062 [1.57] DIA.
NO. OF CAT. CAT. CAT. CAT.
W S TERMS MATERIAL NO. NO. NO. NO.
.500 Single 25 PBE 15031 15091 15071 15041
(12.7) Row GEE 15231 15291 15271 15241
1.500 1.000 50 PBE 15032 15092 15072 15042
(38.1) (25.4) GEE 15232 15292 15272 15242
1.500 1.187 50 PBE 15036 15096 15076 15046
(38.1) (30.1) GEE 15236 15296 15276 15246
2.000 1.500 50 PBE 15033 15093 15073 15043
(50.8) (38.1) GEE 15233 15293 15273 15243
2.500 2.000 50 PBE 15034 15094 15074 15044
(63.5) (50.8) GEE 15234 15294 15274 15244
3.000 2.500 50 PBE 15035 15095 15075 15045
(76.2) (63.5) GEE 15235 15295 15275 15245
NO. OF CAT. CAT. CAT. CAT. CAT.
W S TERMS MATERIAL NO. NO. NO. NO. NO.
.312 Single 25 PBE 15021 15023 15025 15063 15053
(7.9) Row GEE 15221 15223 15225 15263 15253
.875 .500 50 PBE 15028 15029 15026 15064 15054
(22.2) (12.7) GEE 15228 15229 15226 15264 15254
1.000 .750 50 PBE 15022 15024 15030 15065 15056
(25.4) (19.1) GEE 15222 15224 15230 15265 15256
NO. OF CAT. CAT. CAT. CAT. CAT. CAT.
W S TERMS MATERIAL NO. NO. NO. NO. NO. NO.
.312 Single 25 PBE 15047 15057 15067 15077 15087 15097
(7.9) Row GEE 15247 15257 15267 15277 15287 15297
.875 .562 50 PBE 15048 15058 15068 15078 15088 15098
(22.2) (14.3) GEE 15248 15258 15268 15278 15288 15298
1.125 .812 50 PBE 15049 15059 15069 15079 15089 15099
(28.6) (20.6) GEE 15249 15259 15269 15279 15289 15299
S
W
1.937 [49.2]
.062 [1.57]
.156 [4.0] .312 [7.9]
.250 [6.4]
1.937 [49.2] 1.937 [49.2] 1.937 [49.2] 1.937 [49.2]
9.685 [246.0]
W
VIEW SHOWING SCORING
.144 [3.7] DIA.
1503 1509 1507 1545
1572 1573 1574 1575 1583 1559
1502 1562 1526 1512 1533
Hole thru
Hole thru
Choice of 5 Types of Terminals
•Five sections SCORED for easy separation.
•Mounting holes in each section.
Choice of 6 Types of Terminals
•Five sections SCORED for easy separation.
•Mounting holes in each section.
Choice of 4 Types of Terminals
•Five sections SCORED for easy separation.
•Mounting holes in each section.
MINIATURE TURRET TERMINAL BOARDS
MODIFICATIONS
Boards can be modified with other materials or terminals of your
choice. Marking can also be added. Quotations upon request.
MINIATURE TURRET TERMINAL BOARDS
TURRET TERMINAL BOARDS
141
Terminals are staked in all except end mounting holes.
Terminals are staked in all except end mounting holes.
MILITARY TERMINAL BOARDS
S
W
.062 [1.57].156 [4.0]
.312 [7.9]
.250 [6.4]
L
.144 [3.7] DIA.
W
NO. OF MATERIAL MATERIAL
TERMS PBE GEE
W S L EACH SIDE CAT. NO. CAT. NO.
1.937 (49.2) 5 15431 15531
3.687 (93.6) 12 15432 15532
.312 Single 5.437 (138.1) 19 15433 15533
(7.9) Row 7.187 (182.5) 26 15434 15534
8.937 (227.0) 33 15435 15535
1.937 (49.2) 5 15436 15536
3.687 (93.6) 12 15437 15537
.875 .562 5.437 (138.1) 19 15438 15538
(22.2) (14.3) 7.187 (182.5) 26 15439 15539
8.937 (227.0) 33 15440 15540
1.937 (49.2) 5 15441 15541
3.687 (93.6) 12 15442 15542
1.125 .812 5.437 (138.1) 19 15443 15543
(28.6) (20.6) 7.187 (182.5) 26 15444 15544
8.937 (227.0) 33 15445 15545
NO. OF MATERIAL MATERIAL
TERMS PBE GEE
W S L EACH SIDE CAT. NO. CAT. NO.
1.562 (39.7) 5 15401 15501
3.093 (78.6) 12 15402 15502
.312 Single 4.625 (117.5) 19 15403 15503
(7.9) Row 6.156 (156.4) 26 15404 15504
7.687 (195.2) 33 15405 15505
1.562 (39.7) 5 15406 15506
3.093 (78.6) 12 15407 15507
.750 .500 4.625 (117.5) 19 15408 15508
(19.1) (12.7) 6.156 (156.4) 26 15409 15509
7.687 (195.2) 33 15410 15510
1.562 (39.7) 5 15411 15511
3.093 (78.6) 12 15412 15512
1.000 .750 4.625 (117.5) 19 15413 15513
(25.4) (19.1) 6.156 (156.4) 26 15414 15514
7.687 (195.2) 33 15415 15515
NO. OF MATERIAL MATERIAL
TERMS GEB GEE
W S L EACH SIDE CAT. NO. CAT. NO.
2.625 (66.7) 5 MS27249-1B1 MS27249-1E1
.500 Single 5.250 (133.4) 10 MS27249-1B2 MS27249-1E2
(12.7) Row 7.875 (200.0) 15 MS27249-1B3 MS27249-1E3
10.500 (266.7) 20 MS27249-1B4 MS27249-1E4
13.125 (333.4) 25 MS27249-1B5 MS27249-1E5
2.625 (66.7) 5 MS27249-2B1 MS27249-2E1
5.250 (133.4) 10 MS27249-2B2 MS27249-2E2
1.500 1.000 7.875 (200.0) 15 MS27249-2B3 MS27249-2E3
(38.1) (25.4) 10.500 (266.7) 20 MS27249-2B4 MS27249-2E4
13.125 (333.4) 25 MS27249-2B5 MS27249-2E5
2.625 (66.7) 5 MS27249-3B1 MS27249-3E1
5.250 (133.4) 10 MS27249-3B2 MS27249-3E2
2.000 1.500 7.875 (200.0) 15 MS27249-3B3 MS27249-3E3
(50.8) (38.1) 10.500 (266.7) 20 MS27249-3B4 MS27249-3E4
13.125 (333.4) 25 MS27249-3B5 MS27249-3E5
2.625 (66.7) 5 MS27249-4B1 MS27249-4E1
5.250 (133.4) 10 MS27249-4B2 MS27249-4E2
2.500 2.000 7.875 (200.0) 15 MS27249-4B3 MS27249-4E3
(63.5) (50.8) 10.500 (266.7) 20 MS27249-4B4 MS27249-4E4
13.125 (333.4) 25 MS27249-4B5 MS27249-4E5
2.625 (66.7) 5 MS27249-5B1 MS27249-5E1
5.250 (133.4) 10 MS27249-5B2 MS27249-5E2
3.000 2.500 7.875 (200.0) 15 MS27249-5B3 MS27249-5E3
(76.2) (63.5) 10.500 (266.7) 20 MS27249-5B4 MS27249-5E4
13.125 (333.4) 25 MS27249-5B5 MS27249-5E5
1562
.125 [3.18]
L
SW
2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7]
.375 [9.5] .375 [9.5].187 [4.8] .120 [3.1] DIA. TYP.
W
VIEW SHOWING SCORING
W
L
S
.218 [5.6]
.125 [3.2]
.067 [1.70] DIA.
W
.062 [1.57]
DOUBLE TURRET TERMINAL
1573
1503
MATERIAL: Choice of either PBE or GEE.
PBE: Paper base electrical, MIL-1-24768/20. Type XP natural, Temp. 250°F (121°C) max.
GEE: Glass Epoxy, MIL-I-24768/27, Type G-10, Temp. 300°F (155°C). max.
Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727. Other platings can be furnished.
Terminal boards are manufactured as per Military specifications MS27249.
SPECIFICATIONS
Board Material: MIL-I-24768/27 TYPE GEE or TYPE GEB. MIL-1-24768/3 .125 (3.2)
Terminal: SE12XC09 PER MIL-T-55155 Tin/Lead Plated (Non-RoHS Compliant)
•Five sections SCORED for easy separation.
•Mounting holes in each section.
THRU HOLE TERMINAL
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
MODIFICATIONS
Boards can be modified with other materials or terminals of your
choice. Marking can also be added. Quotations upon request.
TERMINAL BOARDS & STRIPS
142
TURRET TERMINAL BOARDS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
QUICK-FIT TERMINAL STRIPS
A
.375 [9.5]
.187 [4.8]
L
.500 [12.7]
.128 [3.3] DIA. (2) PLS .062 [1.57]
BACKING
INSULATOR
.031 (.79)
FIBER
A NO. TERM. BACKING STRIP
L MTG. EACH CAT. CAT.
LENGTH CENTERS SIDE NO. NO.
1.500 (38.1) 1.125 (28.6) 2 4116 4401
2.250 (57.2) 1.875 (47.6) 4 4117 4402
3.000 (76.2) 2.625 (66.7) 6 4118 4403
3.750 (95.3) 3.375 (85.7) 8 4119 4404
4.500 (114.3) 4.125 (104.8) 10 4120 4405
MATERIAL: Fiberglass - NEMA GRADE GPO-3.
A glass polyester rated for continuous
operation at 300°F (155°C) .062 (1.57)
Backing Strips: .031 (.79) fibre with
mounting holes drilled only
Terminals: Brass
CAT. NO. 1257 .032 (.81) Bright Brass
Other platings available on special order
NO. OF
L A TERMS CAT. NO. CAT. NO. CAT. NO. CAT. NO.
1.125 (28.6) .750 (19.1) 1 603-1 609-1 604-1 607-1
1.500 (38.1) 1.125 (28.6) 2 603-2 609-2 604-2 607-2
1.875 (47.6) 1.500 (38.1) 3 603-3 609-3 604-3 607-3
2.250 (57.2) 1.875 (47.6) 4 603-4 609-4 604-4 607-4
2.625 (66.7) 2.250 (57.2) 5 603-5 609-5 604-5 607-5
3.000 (76.2) 2.625 (66.7) 6 603-6 609-6 604-6 607-6
3.375 (85.7) 3.000 (76.2) 7 603-7 609-7 604-7 607-7
3.750 (95.3) 3.375 (85.7) 8 603-8 609-8 604-8 607-8
4.125 (104.8) 3.750 (95.3) 9 603-9 609-9 604-9 607-9
4.500 (114.3) 4.125 (104.8) 10 603-10 609-10 604-10 607-10
NO. OF MATERIAL MATERIAL
TERMS PBE GEE
W S L EACH SIDE CAT. NO. CAT. NO.
2.625 (66.7) 5 15101 15301
5.250 (133.4) 12 15102 15302
.500 [12.7] Single Row 7.875 (200.0) 19 15103 15303
10.500 (266.7) 26 15104 15304
13.125 (333.4) 33 15105 15305
2.625 (66.7) 5 15106 15306
5.250 (133.4) 12 15107 15307
1.188 (30.2) .750 (19.1) 7.875 (200.0) 19 15108 15308
10.50 (266.7) 26 15109 15309
13.125 (333.4) 33 15110 15310
2.625 (66.7) 5 15111 15311
5.250 (133.4) 12 15112 15312
1.500 (38.1) 1.000 (25.4) 7.875 (200.0) 19 15113 15313
10.500 (266.7) 26 15114 15314
13.125 (333.4) 33 15115 15315
2.625 (66.7) 5 15116 15316
5.250 (133.4) 12 15117 15317
2.000 (50.8) 1.500 (38.1) 7.875 (200.0) 19 15118 15318
10.500 (266.7) 26 15119 15319
13.125 (333.4) 33 15120 15320
2.625 (66.7) 5 15121 15321
5.250 (133.4) 12 15122 15322
2.500 (63.5) 2.000 (50.8) 7.875 (200.0) 19 15123 15323
10.500 (266.7) 26 15124 15324
13.125 (333.4) 33 15125 15325
2.625 (66.7) 5 15126 15326
5.250 (133.4) 12 15127 15327
3.000 (76.2) 2.500 (63.5) 7.875 (200.0) 19 15128 15328
10.500 (266.7) 26 15129 15329
13.125 (333.4) 33 15130 15330
•Save Tooling •Economical •Complete Range of Sizes
BOARDS ON THIS PAGE ARE NOT SCORED
Ready-Made Terminal Boards: Low cost, meets commercial and military specifications.
Produced in large quantities, making it possible to eliminate tooling and setup charges
usually applied to non-standard boards.
Terminals are staked in all holes except end mounting holes.
Hole thru
1503
WS
.375 [9.5].187 [4.8] .093 [2.36]
.120 [3.1] DIA.
W
L
A
.375 [9.5]
.187 [4.8]
L
.500 [12.7]
.120 [3.1] DIA. (2) PLS .093 [2.36]
Hole thru
1503 1509 1545 1507
MATERIAL: Choice of either PBE or GEE.
PBE: Paper base electrical,MIL-1-24768/20, Type XP natural, Temp. 250°F (121°C) max.
GEE: Glass epoxy, MIL-I-24768/27, Type G-10, Temp. 300ºF (155°C) max.
Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727. Other plating can be furnished.
MATERIAL: PBE
PBE: Paper base electrical, FED. LP-513, Type XP natural,
Temp. 250°F (121°C) max.
Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727.
Other plating can be furnished.
MODIFICATIONS
Boards can be modified with other materials or terminals of your
choice. Marking can also be added. Quotations upon request.
.250 (6.4) TABS
TERMINAL STRIPS (STANDARD & MINIATURE)
TERMINAL STRIPS
143
BINDING POST STRIPS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
FIBERGLASS: Reinforced Polyester NEMA
Graded GPO-3 rated for 300˚F. (155˚ C).
GEE: Glass, Epoxy, MIL-I-24768/27
Type G-10. Temp. 300˚F. (155˚C).
PBE: Paper base electrical, FED. LP-513
Type XP natural, Temp 250˚F. max. (121˚C).
Terminals supplied on
these strips
CAT. NO. 1248
CAT. NO. 1209
GLASS FIBER- ANO.
EPOXY GLASS L MTG. OF
CAT. NO. CAT. NO. LENGTH CENTERS TERM
4147 4157 1.50 (38.1) 1.00 (25.4) 1
4148 4158 2.00 (50.8) 1.50 (38.1) 2
4149 4159 2.50 (63.5) 2.00 (50.8)3
4150 4160 3.00 (76.2) 2.50 (63.5) 4
4151 4161 3.50 (88.9) 3.00 (76.2) 5
4152 4162 4.00 (101.6) 3.50 (88.9) 6
4153 4163 4.50 (114.3) 4.00 (101.6) 7
4154 4164 5.00 (127.0) 4.50 (114.3) 8
4155 4165 5.50 (139.7) 5.00 (127.0) 9
4156 4166 6.00 (152.4) 5.50 (139.7) 10
XP GLASS FIBER- ANO.
PHENOLIC EPOXY GLASS L MTG. OF
CAT. NO. CAT. NO. CAT. NO. LENGTH CENTERS TERM
4187 4177 4167 1.250 (31.8).875 (22.2) 1
4188 4178 4168 1.687 (42.8) 1.312 (33.3) 2
4189 4179 4169 2.125 (54.0) 1.750 (44.5) 3
4190 4180 4170 2.562 (65.1) 2.187 (55.5) 4
4191 4181 4171 3.000 (76.2) 2.625 (66.7) 5
4192 4182 4172 3.437 (87.3) 3.062 (77.8)6
4193 4183 4173 3.875 (98.4) 3.500 (88.9) 7
4194 4184 4174 4.312 (109.5) 3.937 (100.0) 8
4195 4185 4175 4.750 (120.7) 4.375 (111.1) 9
4196 4186 4176 5.187 (131.7) 4.812 (122.2) 10
MATERIAL SPECIFICATIONS FOR ALL BINDING POST STRIPS
A
.437 [11.1]
.187 [4.8]
L
.625 [15.9]
.062 [1.57]
.140 [3.6] DIA. (2) PLS
.875 [22.2]
L
.250 [6.4] A
.500 [12.7]
.093 [2.36]
.171 [4.4] DIA. (2) PLS
HEAVY DUTY
Terminals supplied on
these strips
STANDARD
Tin plated lugs and brackets. Bakelite XP .062 (1.57) thick. In addition to the strips
shown, we manufacture many other varieties in any configuration and materials
required. Send samples or sketch for prompt quotation.
MINIATURE
FIG. 25
FIG. 24
FIG. 35 FIG. 36 FIG. 37
STANDARD
.375 [9.5] .375 [9.5]
.375 [9.5]
.140 [3.6] DIA.
.250 [6.4].250 [6.4]
.312 [7.9]
.096 [2.5] DIA.
STANDARD FIG MINIATURE
CAT. NO. NO. CAT. NO.
800 1837
801 2838
802 3839
803 4840
804 5841
805 6842
806 7843
807 8844
808 9845
809 10 846
810 11 847
811 12 848
812 13 849
813 14 850
814 15 851
815 16 852
816 17 853
817 18854
818 19 855
819 20 856
820 21 857
821 22 858
822 23 859
823 24 860
824 25 861
825 26 862
826 27 863
827 28864
828 29 865
829 30 866
830 31 867
831 32 868
832 33 —
833 34 —
834 35 —
835 36 —
836 37 —
FIG. 2 FIG. 3FIG. 1 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8
FIG. 10
FIG. 11
FIG. 9
FIG. 12 FIG. 13 FIG. 14 FIG. 15
FIG. 17
FIG. 16
FIG. 18 FIG. 20FIG. 19 FIG. 21
FIG. 22 FIG. 23
FIG. 26 FIG. 27 FIG. 28 FIG. 29
FIG. 31
FIG. 30 FIG. 32 FIG. 33 FIG. 34
0.1 .0039
0.2 .0079
0.3 .0118
0.397 .0156
0.4 .0157
0.5 .0197
0.6 .0236
0.7 .0276
0.794 .0313
0.8 .0315
0.9 .0354
1.0 .0394
1.1 .0433
1.191 .0469
1.2 .0472
1.3 .0512
1.4 .0551
1.5 .0591
1.588 .0625
1.6 .0630
1.7 .0669
1.8 .0709
1.9 .0748
1.984 .0781
2.0 .0787
2.1 .0827
2.2 .0866
2.3 .0906
2.381 .0938
2.4 .0945
2.5 .0984
2.6 .1024
2.7 .1063
2.778 .1094
2.8 .1102
2.9 .1142
3.0 .1181
3.1 .1220
3.175 .1250
3.2 .1260
3.3 .1299
3.4 .1339
3.5 .1378
3.572 .1406
3.6 .1417
3.7 .1457
3.8 .1496
3.9 .1535
3.969 .1563
4.0 .1575
4.1 .1614
4.2 .1654
4.3 .1693
4.366 .1719
4.4 .1732
4.5 .1772
4.6 .1811
4.7 .1850
4.763 .1875
4.8 .1890
4.9 .1929
5.0 .1969
5.1 .2008
5.159 .2031
mm
Decimals Fractions
mm
Decimals Fractions
mm
Decimals Fractions
mm
Decimals Fractions
mm
Decimals Fractions
20.638 .8125
20.7 .8150
20.8 .8189
20.9 .8228
21.0 .8268
21.034 .8281
21.1 .8307
21.2 .8346
21.3 .8386
21.4 .8425
21.431 .8438
21.5 .8465
21.6 .8504
21.7 .8543
21.8 .8583
21.828 .8594
21.9 .8622
22.0 .8661
22.1 .8701
22.2 .8740
22.225 .8750
22.3 .8780
22.4 .8819
22.5 .8858
22.6 .8898
22.622 .8906
22.7 .8937
22.8 .8976
22.9 .9016
23.0 .9055
23.019 .9063
23.1 .9094
23.2 .9134
23.3 .9173
23.4 .9213
23.416 .9219
23.5 .9252
23.6 .9291
23.7 .9331
23.8 .9370
23.813 .9375
23.9 .9409
24.0 .9449
24.1 .9488
24.2 .9528
24.209 .9531
24.3 .9567
24.4 .9606
24.5 .9646
24.6 .9685
24.606 .9688
24.7 .9724
24.8 .9764
24.9 .9803
25.0 .9843
25.003 .9844
25.1 .9882
25.2 .9921
25.3 .9961
25.400 1.0000
15.5 .6102
15.6 .6142
15.7 .6181
15.8 .6220
15.875 .6250
15.9 .6260
16.0 .6299
16.1 .6339
16.2 .6378
16.272 .6406
16.3 .6417
16.4 .6457
16.5 .6496
16.6 .6535
16.669 .6563
16.7 .6575
16.8 .6614
16.9 .6654
17.0 .6693
17.066 .6719
17.1 .6732
17.2 .6772
17.3 .6811
17.4 .6850
17.463 .6875
17.5 .6890
17.6 .6929
17.7 .6968
17.8 .7008
17.859 .7031
17.9 .7047
18.0 .7087
18.1 .7126
18.2 .7165
18.256 .7188
18.3 .7205
18.4 .7244
18.5 .7283
18.6 .7323
18.653 .7344
18.7 .7362
18.8 .7402
18.9 .7441
19.0 .7480
19.050 .7500
19.1 .7520
19.2 .7559
19.3 .7598
19.4 .7638
19.447 .7656
19.5 .7677
19.6 .7717
19.7 .7756
19.8 .7795
19.844 .7813
19.9 .7835
20.0 .7874
20.1 .7913
20.2 .7953
20.241 .7969
20.3 .7992
20.4 .8031
20.5 .8071
20.6 .8110
10.319 .4063
10.4 .4094
10.5 .4134
10.6 .4173
10.7 .4213
10.716 .4219
10.8 .4252
10.9 .4291
11.0 .4331
11.1 .4370
11.113 .4375
11.2 .4409
11.3 .4449
11.4 .4488
11.5 .4528
11.509 .4531
11.6 .4567
11.7 .4606
11.8 .4646
11.9 .4685
11.906 .4688
12.0 .4724
12.1 .4764
12.2 .4803
12.3 .4843
12.303 .4844
12.4 .4882
12.5 .4921
12.6 .4961
12.700 .5000
12.8 .5039
12.9 .5079
13.0 .5118
13.097 .5156
13.1 .5157
13.2 .5197
13.3 .5236
13.4 .5276
13.494 .5313
13.5 .5315
13.6 .5354
13.7 .5394
13.8 .5433
13.891 .5469
13.9 .5472
14.0 .5512
14.1 .5551
14.2 .5591
14.288 .5625
14.3 .5630
14.4 .5669
14.5 .5709
14.6 .5748
14.684 .5781
14.7 .5787
14.8 .5827
14.9 .5866
15.0 .5906
15.081 .5938
15.1 .5945
15.2 .5984
15.3 .6024
15.4 .6063
15.478 .6094
5.2 .2047
5.3 .2087
5.4 .2126
5.5 .2165
5.556 .2188
5.6 .2205
5.7 .2244
5.8 .2283
5.9 .2323
5.953 .2344
6.0 .2362
6.1 .2402
6.2 .2441
6.3 .2480
6.350 .2500
6.4 .2520
6.5 .2559
6.6 .2598
6.7 .2638
6.747 .2656
6.8 .2677
6.9 .2717
7.0 .2756
7.1 .2795
7.144 .2813
7.2 .2835
7.3 .2874
7.4 .2913
7.5 .2953
7.541 .2969
7.6 .2992
7.7 .3031
7.8 .3071
7.9 .3110
7.938 .3125
8.0 .3150
8.1 .3189
8.2 .3228
8.3 .3268
8.334 .3281
8.4 .3307
8.5 .3346
8.6 .3386
8.7 .3425
8.731 .3438
8.8 .3465
8.9 .3504
9.0 .3543
9.1 .3583
9.128 .3594
9.2 .3622
9.3 .3661
9.4 .3701
9.5 .3740
9.525 .3750
9.6 .3780
9.7 .3819
9.8 .3858
9.9 .3898
9.922 .3906
10.0 .3937
10.1 .3976
10.2 .4016
10.3 .4055
PC Hardware •Coin Cell Holders & Retainers •Plugs & Jacks •Battery Clips & Holders •Computer Brackets & Hardware •Fuse Clips & Holders
Terminals & Lugs •Spacers & Standoffs •Panel & Insulating Hardware •Micro Pins & Jacks •Tape & Reel SMT Products
Test Points •Audio Jacks •Auto Fuse Clips •USB and IEEE 1394 Plugs & Sockets
CONVERSION CHART
MILLIMETERS •DECIMALS •FRACTIONS
17/64
1/8
15/64
5/16
1/4
3/8
7/32
19/64
21/64
23/64
25/64
9/32
11/32
5/32
3/32
1/32
13/32
15/32
17/32
19/32
25/32
23/32
21/32
27/32
29/32
31/32
1/64
3/64
5/64
7/64
9/64
11/64
13/64
27/64
29/64
31/64
33/64
35/64
37/64
39/64
51/64
49/64
47/64
45/64
43/64
41/64
53/64
55/64
57/64
59/64
61/64
63/64
1/16
3/16
9/16
7/16
11/16
15/16
13/16
1/2
5/8
3/4
1
7/8
®
www.keyelco.com
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
QUALITY ASSURANCEENGINEERING DATA
ENGINEERING DATA /QUALITY ASSURANCE
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Keystone’s quality system is certified to ISO 9001:2000 by DNV Certifica-
tion, Inc. under the RAB and RvA accreditations. Our Quality Assurance Program
is in accordance with these requirements and applies to all standard and cus-
tom interconnect components and electronic hardware.
It is Keystone’s Quality Policy to continuously improve its products to better
satisfy the needs of its customers and to deliver quality products, every time
and on time.
•Baty Gage Master Comparator •Ames Precision Hardness Tester
•Thread, Plug and Ring Gauges •Gauge Blocks and Pin Gauges
•Granite Surface Plates •Micrometers and Verniers
•Dial Indicators •Depth and Height Gauges
•Plating Thickness Tester •ISO 9001:2008 Certified
QUALITY ASSURANCE
DRILL SIZE DIAMETER TABLE
.4040 Y
.4062 13/32
.4130 Z
.4219 27/64
.4375 7/16
.4531 29/64
.4688 15/32
.4844 31/64
.5000 1/2
.5156 33/64
.5312 17/32
.5469 35/64
.5625 9/16
.5781 37/64
.5938 19/32
.6094 39/64
.6250 5/8
.6406 41/64
.6562 21/32
.6719 43/64
.6875 11/16
.7031 45/64
.7188 23/32
.7344 47/64
.7500 3/4
.7656 49/64
.7812 25/32
.7969 51/64
.8120 13/16
.8281 53/64
.8438 27/32
.8594 55/64
.8750 7/8
.8906 57/64
.9062 29/32
.9219 59/64
.9375 15/16
.9531 61/64
.9688 31/32
.9844 63/64
1.0000 1/1
.0135 80
.0145 79
.0156 1/64
.0160 78
.0180 77
.0200 76
.0210 75
.0225 74
.0240 73
.0250 72
.0260 71
.0280 70
.0292 69
.0310 68
.0312 1/32
.0320 67
.0330 66
.0350 65
.0360 64
.0370 63
.0380 62
.0390 61
.0400 60
.0410 59
.0420 58
.0430 57
.0465 56
.0469 3/64
.0520 55
.0550 54
.0595 53
.0625 1/16
.0635 52
.0670 51
.0700 50
.0730 49
.0760 48
.0781 5/64
.0785 47
.0810 46
.0820 45
.0860 44
.0890 43
Drill
Diameter Size
.0935 42
.0938 3/32
.0960 41
.0980 40
.0995 39
.1015 38
.1040 37
.1065 36
.1094 7/64
.1100 35
.1110 34
.1130 33
.1160 32
.1200 31
.1250 1/8
.1285 30
.1360 29
.1405 28
.1406 9/64
.1440 27
.1470 26
.1495 25
.1520 24
.1540 23
.1562 5/32
.1570 22
.1590 21
.1610 20
.1660 19
.1695 18
.1719 11/64
.1730 17
.1770 16
.1800 15
.1820 14
.1850 13
.1875 3/16
.1890 12
.1910 11
.1935 10
.1960 9
.1990 8
.2010 7
Drill
Diameter Size
.2031 13/64
.2040 6
.2055 5
.2090 4
.2130 3
.2188 7/32
.2210 2
.2280 1
.2340 A
.2344 15/64
.2380 B
.2420 C
.2460 D
.2500 1/4
.2500 E
.2570 F
.2610 G
.2656 17/64
.2660 H
.2720 I
.2770 J
.2810 K
.2812 9/32
.2900 L
.2950 M
.2969 19/64
.3020 N
.3125 5/16
.3160 O
.3230 P
.3281 21/64
.3320 Q
.3390 R
.3438 11/32
.3480 S
.3580 T
.3594 23/64
.3680 U
.3750 3/8
.3770 V
.3860 W
.3906 25/64
.3970 X
Drill
Diameter Size
Drill
Diameter Size
Recommended
Screw/Stud Screw/Stud Clearance
Size Dia. Max. Hole Dia.
0.060 .067
1.073 .078
2.086 .093
3.099 .105
4.112 .120
5.125 .130
6.138 .144
8.164 .169
10 .190 .196
12 .216 .220
14 .242 .250
1/4 .250 .257
SCREW/STUD CLEARANCE HOLE TABLE
CAT. 14 – 573 PAGE CAT. PAGE CAT. PAGE
NO. NO. NO. 574 – 1027 NO. NO. 1028 – 1421 NO.
14 thru 48 . . . . . . . . . . . . . . . . . . . . . . 134
50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
51 thru 52 . . . . . . . . . . . . . . . . . . . . . . . . 9
53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
55 thru57 . . . . . . . . . . . . . . . . . . . . . . . . 8
58 thru 60 . . . . . . . . . . . . . . . . . . . . . . . 10
61 thru 66 . . . . . . . . . . . . . . . . . . . . . . . 11
68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
69 thru 71 . . . . . . . . . . . . . . . . . . . . . . . 11
72 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
78 thru 80 . . . . . . . . . . . . . . . . . . . . . . . 11
81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
82 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
86 thru 89 . . . . . . . . . . . . . . . . . . . . . . . 10
90 thru 91 . . . . . . . . . . . . . . . . . . . . . . . 11
92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
93 thru 95 . . . . . . . . . . . . . . . . . . . . . . . 11
96 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
97 thru 98 . . . . . . . . . . . . . . . . . . . . . . . 11
99 thru 100 . . . . . . . . . . . . . . . . . . . . . . 10
101 thru 103 . . . . . . . . . . . . . . . . . . . . . . 3
104 thru 105 . . . . . . . . . . . . . . . . . . . . . . 5
106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
108-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 13
108C . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
109-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 13
109-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 13
131 thru 132 . . . . . . . . . . . . . . . . . . . . . 20
137 thru 140 . . . . . . . . . . . . . . . . . . . . . 22
146 thru 153 . . . . . . . . . . . . . . . . . . . . . 21
154 thru 156 . . . . . . . . . . . . . . . . . . . . . 22
158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
169 thru 201 . . . . . . . . . . . . . . . . . . . . . 22
202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
203-P . . . . . . . . . . . . . . . . . . . . . . . . . . 31
204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
206 thru 208 . . . . . . . . . . . . . . . . . . . . . 10
209 thru 210 . . . . . . . . . . . . . . . . . . . . . 12
211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
217 thru 222 . . . . . . . . . . . . . . . . . . . . . 11
223 thru 224 . . . . . . . . . . . . . . . . . . . . . 20
227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
230-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 13
232 thru 237 . . . . . . . . . . . . . . . . . . . . . 28
238 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
261 thru 272 . . . . . . . . . . . . . . . . . . . . . 30
288 thru 296 . . . . . . . . . . . . . . . . . . . . . 12
301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
303-P . . . . . . . . . . . . . . . . . . . . . . . . . . 31
330 thru 338 . . . . . . . . . . . . . . . . . . . . . 75
340 thru 344 . . . . . . . . . . . . . . . . . . . . 132
345 thru 349 . . . . . . . . . . . . . . . . . . . . 131
351 thru 359 . . . . . . . . . . . . . . . . . . . . . 75
361 thru 375 . . . . . . . . . . . . . . . . . . . . . 74
376 thru 396 . . . . . . . . . . . . . . . . . . . . . 71
397 thru 438 . . . . . . . . . . . . . . . . . . . . . 74
450 thru 452 . . . . . . . . . . . . . . . . . . . . 107
453 thru 459 . . . . . . . . . . . . . . . . . . . . . 74
468 thru 471 . . . . . . . . . . . . . . . . . . . . . 71
476 . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
480 thru 496 . . . . . . . . . . . . . . . . . . . . . 87
498 thru 504 . . . . . . . . . . . . . . . . . . . . . . 2
510 thru 526 . . . . . . . . . . . . . . . . . . . . . 87
540 thru 548 . . . . . . . . . . . . . . . . . . . . . 86
550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
552 . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
553 thru 557 . . . . . . . . . . . . . . . . . . . . . . 8
561 thru 567 . . . . . . . . . . . . . . . . . . . . 102
571 thru 573 . . . . . . . . . . . . . . . . . . . . 103
574 . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
575 . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
576 . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
577 . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
580 thru 583 . . . . . . . . . . . . . . . . . . . . 102
584 thru 589 . . . . . . . . . . . . . . . . . . . . 103
590 thru 591 . . . . . . . . . . . . . . . . . . . . . . 9
593 thru 594 . . . . . . . . . . . . . . . . . . . . . 30
595 thru 597 . . . . . . . . . . . . . . . . . . . . . . 9
598 thru 599 . . . . . . . . . . . . . . . . . . . . 102
603 thru 609 . . . . . . . . . . . . . . . . . . . . 142
611 thru 612 . . . . . . . . . . . . . . . . . . . . 114
613 . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
614 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
615 . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
616 thru 617 . . . . . . . . . . . . . . . . . . . . 114
618 thru 620 . . . . . . . . . . . . . . . . . . . . 115
621 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
628 thru 629 . . . . . . . . . . . . . . . . . . . . . . 9
630 . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
631 thru 632 . . . . . . . . . . . . . . . . . . . . 114
633 . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
634 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
635 thru 636 . . . . . . . . . . . . . . . . . . . . 30
637 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
652 thru 659 . . . . . . . . . . . . . . . . . . . . 106
680 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
700 thru 705 . . . . . . . . . . . . . . . . . . . . . 85
708 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
715 thru 716 . . . . . . . . . . . . . . . . . . . . . 85
717 thru 729 . . . . . . . . . . . . . . . . . . . . 130
730 thru 778 . . . . . . . . . . . . . . . . . . . . 129
779 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
780 thru 785 . . . . . . . . . . . . . . . . . . . . 130
789 thru 799 . . . . . . . . . . . . . . . . . . . . . 74
800 thru 868 . . . . . . . . . . . . . . . . . . . . 143
875 thru 898 . . . . . . . . . . . . . . . . . . . . . 74
900 thru 902 . . . . . . . . . . . . . . . . . . . . 103
903 thru 910 . . . . . . . . . . . . . . . . . . . . . 58
911 . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
913 thru 918 . . . . . . . . . . . . . . . . . . . . . 58
920 thru 923 . . . . . . . . . . . . . . . . . . . . . 94
924 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
925 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
926 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
927 thru 930 . . . . . . . . . . . . . . . . . . . . . 97
931 thru 932 . . . . . . . . . . . . . . . . . . . . . 94
933 thru 935 . . . . . . . . . . . . . . . . . . . . . 95
936 thru 938 . . . . . . . . . . . . . . . . . . . . 103
940 thru 941 . . . . . . . . . . . . . . . . . . . . . 95
945 thru 957 . . . . . . . . . . . . . . . . . . . . . 96
967 thru 968 . . . . . . . . . . . . . . . . . . . . . 29
970 thru 973 . . . . . . . . . . . . . . . . . . . . 102
1005 thru 1008 . . . . . . . . . . . . . . . . . . . 54
1010 thru 1011 . . . . . . . . . . . . . . . . . . . 20
1012 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1012C . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1013 thru 1015 . . . . . . . . . . . . . . . . . . . 18
1016 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1017 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1017-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13
1018 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1018C . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1019 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1020 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1020C . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1021 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1021-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13
1022 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1022C . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1023 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1024 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1024C . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1025-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1028 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1028C . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1029 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1029C . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1029LC . . . . . . . . . . . . . . . . . . . . . . . . . 18
1030 thru 1041 . . . . . . . . . . . . . . . . . . . 59
1042 thru 1043 . . . . . . . . . . . . . . . . . . . 17
1045 thru 1046 . . . . . . . . . . . . . . . . . . . 59
1048 thru 1049 . . . . . . . . . . . . . . . . . . . 17
1050 thru 1051 . . . . . . . . . . . . . . . . . . . 20
1052 thru 1053 . . . . . . . . . . . . . . . . . . . . 5
1056 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1059 thru 1064 . . . . . . . . . . . . . . . . . . . . 4
1065 thru 1067 . . . . . . . . . . . . . . . . . . . . 3
1068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1069 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1071 thru 1073 . . . . . . . . . . . . . . . . . . . . 5
1081 thru 1082 . . . . . . . . . . . . . . . . . . . . 4
1083 thru 1091 . . . . . . . . . . . . . . . . . . . . 5
1093 thru 1094 . . . . . . . . . . . . . . . . . . . . 4
1103 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1139 thru 1199 . . . . . . . . . . . . . . . . . . . 24
1200 . . . . . . . . . . . . . . . . . . . . . . . . . . 123
1201 thru 1209 . . . . . . . . . . . . . . . . . . . 66
1210 . . . . . . . . . . . . . . . . . . . . . . . . . . 123
1211 thru 1213 . . . . . . . . . . . . . . . . . . . 52
1215 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1216 . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1217 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1218 thru 1219 . . . . . . . . . . . . . . . . . . 101
1220 thru 1222 . . . . . . . . . . . . . . . . . . . 54
1223 thru 1226 . . . . . . . . . . . . . . . . . . 123
1227 thru 1229 . . . . . . . . . . . . . . . . . . . 54
1230 thru 1231 . . . . . . . . . . . . . . . . . . 123
1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1233 thru 1235 . . . . . . . . . . . . . . . . . . . 54
1236 thru 1238 . . . . . . . . . . . . . . . . . . 123
1240 thru 1242 . . . . . . . . . . . . . . . . . . . 54
1247 thru 1248 . . . . . . . . . . . . . . . . . . . 67
1249 thru 1250 . . . . . . . . . . . . . . . . . . . 59
1251 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1252 . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1254 . . . . . . . . . . . . . . . . . . . . . . . . . . 142
1256 thru 1263 . . . . . . . . . . . . . . . . . . . 54
1264 . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1265 thru 1266 . . . . . . . . . . . . . . . . . . . 53
1267 . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1269 thru 1271 . . . . . . . . . . . . . . . . . . . 54
1272 thru 1273 . . . . . . . . . . . . . . . . . . . 67
1280 . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
1281 thru 1282 . . . . . . . . . . . . . . . . . . . 53
1283 thru 1284 . . . . . . . . . . . . . . . . . . . 66
1285 thru 1286 . . . . . . . . . . . . . . . . . . . 52
1287 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1288 . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1289 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1290 thru 1291 . . . . . . . . . . . . . . . . . . . 31
1292 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1293 . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
1294 thru 1295 . . . . . . . . . . . . . . . . . . . 31
1298 thru 1299 . . . . . . . . . . . . . . . . . . . 66
1300 thru 1326 . . . . . . . . . . . . . . . . . . 135
1345 . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
1352 thru 1365 . . . . . . . . . . . . . . . . . . 101
1366 thru 1369 . . . . . . . . . . . . . . . . . . 100
1370 thru 1371 . . . . . . . . . . . . . . . . . . 101
1372 thru 1373 . . . . . . . . . . . . . . . . . . 100
1375 thru 1377 . . . . . . . . . . . . . . . . . . 101
1378 thru 1379 . . . . . . . . . . . . . . . . . . 100
1380 thru 1400 . . . . . . . . . . . . . . . . . . 101
1401 . . . . . . . . . . . . . . . . . . . . . . . . . . 100
1402 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1404 . . . . . . . . . . . . . . . . . . . . . . . . . . 100
1405 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1406 thru 1408 . . . . . . . . . . . . . . . . . . 100
1411 thru 1420 . . . . . . . . . . . . . . . . . . . 98
1421 . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NUMERICAL INDEX
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
NUMERICAL INDEX
1422 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1424 . . . . . . . . . . . . . . . . . . . . . . . . . . 100
1425 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1426 thru 1428 . . . . . . . . . . . . . . . . . . 100
1430 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1431 thru 1432 . . . . . . . . . . . . . . . . . . . 98
1434 . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1435 thru 1436 . . . . . . . . . . . . . . . . . . . 98
1437 thru 1438 . . . . . . . . . . . . . . . . . . . 99
1439 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
1441 thru 1447 . . . . . . . . . . . . . . . . . . 101
1448 thru 1449 . . . . . . . . . . . . . . . . . . . 84
1450 thru 1451 . . . . . . . . . . . . . . . . . . . 71
1453 . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1454 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
1455 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1456 . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1457 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
1458 thru 1459 . . . . . . . . . . . . . . . . . . . 84
1460 thru 1463 . . . . . . . . . . . . . . . . . . 101
1464 thru 1467 . . . . . . . . . . . . . . . . . . . 84
1468 thru 1471 . . . . . . . . . . . . . . . . . . . 98
1472 . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1473 . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1474 thru 1475 . . . . . . . . . . . . . . . . . . . 71
1476 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
1476 . . . . . . . . . . . . . . . . . . . . . . . . . . 131
1477 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
1477 . . . . . . . . . . . . . . . . . . . . . . . . . . 131
1478 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
1479 . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1480 thru 1484 . . . . . . . . . . . . . . . . . . . 74
1485 . . . . . . . . . . . . . . . . . . . . . . . . . . 131
1486 . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1487 . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1488 . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1490 thru 1494 . . . . . . . . . . . . . . . . . . . 74
1495 . . . . . . . . . . . . . . . . . . . . . . . . . . 123
1496 thru 1497 . . . . . . . . . . . . . . . . . . . 99
1498 thru 1500 . . . . . . . . . . . . . . . . . . 123
1502 thru 1503 . . . . . . . . . . . . . . . . . . 138
1507 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1508 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1509 thru 1511 . . . . . . . . . . . . . . . . . . 139
1514 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1515 thru 1519 . . . . . . . . . . . . . . . . . . 139
1520 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1525 thru 1526 . . . . . . . . . . . . . . . . . . 139
1527 thru 1532 . . . . . . . . . . . . . . . . . . 138
1533 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1535 thru 1537 . . . . . . . . . . . . . . . . . . . 67
1540 thru 1545 . . . . . . . . . . . . . . . . . . 139
1546 . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
1547 thru 1548 . . . . . . . . . . . . . . . . . . . 71
1556 . . . . . . . . . . . . . . . . . . . . . . . . . . 115
1557 thru 1559 . . . . . . . . . . . . . . . . . . 139
1560 thru 1561 . . . . . . . . . . . . . . . . . . . 73
1562 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1563 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1564 thru 1571 . . . . . . . . . . . . . . . . . . 115
1572 thru 1573 . . . . . . . . . . . . . . . . . . 138
1575 thru 1583 . . . . . . . . . . . . . . . . . . 139
1587 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1589 thru 1591 . . . . . . . . . . . . . . . . . . . 73
1592 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1593 thru 1595 . . . . . . . . . . . . . . . . . . 138
1596 . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
1598 . . . . . . . . . . . . . . . . . . . . . . . . . . 138
1601 . . . . . . . . . . . . . . . . . . . . . . . . . . 104
1603 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
1604 thru 1605 . . . . . . . . . . . . . . . . . . . 73
1606 thru 1607 . . . . . . . . . . . . . . . . . . . 98
1608 thru 1612 . . . . . . . . . . . . . . . . . . . 73
1613 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1614 thru 1619 . . . . . . . . . . . . . . . . . . . 98
1620 thru 1625 . . . . . . . . . . . . . . . . . . . 73
1626 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
1627 thru 1630 . . . . . . . . . . . . . . . . . . . 73
1633 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
1635 thru 1639 . . . . . . . . . . . . . . . . . . . 71
1640 thru 1641 . . . . . . . . . . . . . . . . . . . 99
1642 thru 1643 . . . . . . . . . . . . . . . . . . . 71
1644 thru 1646 . . . . . . . . . . . . . . . . . . . 70
1650 thru 1655 . . . . . . . . . . . . . . . . . . . 73
1656 thru 1657 . . . . . . . . . . . . . . . . . . . 71
1658 thru 1659 . . . . . . . . . . . . . . . . . . . 98
1662 thru 1672 . . . . . . . . . . . . . . . . . . . 74
1673 thru 1689 . . . . . . . . . . . . . . . . . . . 99
1692 . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1693 thru 1699 . . . . . . . . . . . . . . . . . . . 98
1700 thru 1706 . . . . . . . . . . . . . . . . . . . 84
1707 . . . . . . . . . . . . . . . . . . . . . . . . . . 135
1708 thru 1710 . . . . . . . . . . . . . . . . . . . 83
1713 thru 1726 . . . . . . . . . . . . . . . . . . 135
1731 thru 1796 . . . . . . . . . . . . . . . . . . . 73
1797 thru 1904 . . . . . . . . . . . . . . . . . . . 71
1909 thru 1920 . . . . . . . . . . . . . . . . . . . 74
1921 thru 1923 . . . . . . . . . . . . . . . . . . . 71
1924 thru 1925 . . . . . . . . . . . . . . . . . . . 74
1927 thru 1933 . . . . . . . . . . . . . . . . . . . 76
1934 thru 1942 . . . . . . . . . . . . . . . . . . . 74
1944 thru 1966 . . . . . . . . . . . . . . . . . . . 70
1967 thru 2001 . . . . . . . . . . . . . . . . . . 100
2002 thru 2005 . . . . . . . . . . . . . . . . . . . 54
2025 thru 2031 . . . . . . . . . . . . . . . . . . . 71
2032 thru 2036 . . . . . . . . . . . . . . . . . . . 74
2037 thru 2053 . . . . . . . . . . . . . . . . . . . 85
2060 thru 2073 . . . . . . . . . . . . . . . . . . . 82
2087 thru 2099 . . . . . . . . . . . . . . . . . . . 70
2103 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2119 thru 2131 . . . . . . . . . . . . . . . . . . . 70
2139 thru 2140 . . . . . . . . . . . . . . . . . . . 24
2149 thru 2161 . . . . . . . . . . . . . . . . . . . 70
2162 thru 2176 . . . . . . . . . . . . . . . . . . . 24
2180 thru 2181 . . . . . . . . . . . . . . . . . . . 70
2182 thru 2199 . . . . . . . . . . . . . . . . . . . 24
2201 thru 2221 . . . . . . . . . . . . . . . . . . . 71
2222 thru 2233 . . . . . . . . . . . . . . . . . . . 21
2238 thru 2243 . . . . . . . . . . . . . . . . . . . 28
2244 thru 2253 . . . . . . . . . . . . . . . . . . 131
2260 thru 2274 . . . . . . . . . . . . . . . . . . . 73
2284 thru 2293 . . . . . . . . . . . . . . . . . . 131
2314 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2341 thru 2398 . . . . . . . . . . . . . . . . . . . 75
2400 thru 2420 . . . . . . . . . . . . . . . . . . . 83
2421 thru 2455 . . . . . . . . . . . . . . . . . . . 84
2460 thru 2473 . . . . . . . . . . . . . . . . . . . 26
2474 thru 2476 . . . . . . . . . . . . . . . . . . . 27
2477 thru 2482 . . . . . . . . . . . . . . . . . . . 26
2484 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2485 thru 2486 . . . . . . . . . . . . . . . . . . . 26
2487 thru 2490 . . . . . . . . . . . . . . . . . . . 27
2500 thru 2508 . . . . . . . . . . . . . . . . . . . 83
2915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2981 thru 2983 . . . . . . . . . . . . . . . . . . . . 7
2988 thru 2989 . . . . . . . . . . . . . . . . . . . . 6
2990 thru 2993 . . . . . . . . . . . . . . . . . . . . 7
2994 thru 2999 . . . . . . . . . . . . . . . . . . . . 6
3000 thru 3013 . . . . . . . . . . . . . . . . . . . . 7
3020 thru 3025 . . . . . . . . . . . . . . . . . . . . 4
3026 thru 3029 . . . . . . . . . . . . . . . . . . . . 7
3030 thru 3031 . . . . . . . . . . . . . . . . . . . . 6
3032 thru 3044 . . . . . . . . . . . . . . . . . . . . 7
3049 . . . . . . . . . . . . . . . . . . . . . . . . . . 132
3050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3051 thru 3069 . . . . . . . . . . . . . . . . . . 132
3070 thru 3074 . . . . . . . . . . . . . . . . . . . . 4
3075 thru 3077 . . . . . . . . . . . . . . . . . . 134
3078 thru 3092 . . . . . . . . . . . . . . . . . . . . 7
3096 thru 3098 . . . . . . . . . . . . . . . . . . . . 6
3101 thru 3110 . . . . . . . . . . . . . . . . . . 132
3111 thru 3228 . . . . . . . . . . . . . . . . . . 131
3229 thru 3241 . . . . . . . . . . . . . . . . . . 132
3347 thru 3373 . . . . . . . . . . . . . . . . . . 131
3381 thru 3391 . . . . . . . . . . . . . . . . . . 134
3402 thru 3438 . . . . . . . . . . . . . . . . . . . 74
3440 thru 3450 . . . . . . . . . . . . . . . . . . 134
3457 thru 3477 . . . . . . . . . . . . . . . . . . . 74
3478 thru 3500 . . . . . . . . . . . . . . . . . . . 71
3501 thru 3509 . . . . . . . . . . . . . . . . . . . 99
3510 thru 3511 . . . . . . . . . . . . . . . . . . . 45
3512 . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3513 thru 3516 . . . . . . . . . . . . . . . . . . . 45
3517 thru 3521 . . . . . . . . . . . . . . . . . . . 44
3522 . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3523 . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3525 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3526 thru 3527 . . . . . . . . . . . . . . . . . . . 42
3528 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3529 thru 3533 . . . . . . . . . . . . . . . . . . . 45
3534 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3535 . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3536 thru 3543 . . . . . . . . . . . . . . . . . . . 43
3544 . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3545 thru 3548 . . . . . . . . . . . . . . . . . . . 55
3549 . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3550 . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3551 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3552 thru 3554 . . . . . . . . . . . . . . . . . . . 43
3555 . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3556 . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3557 . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3558 thru 3560 . . . . . . . . . . . . . . . . . . . 38
3561 thru 3562 . . . . . . . . . . . . . . . . . . . 44
3563 thru 3564 . . . . . . . . . . . . . . . . . . . 40
3565 thru 3566 . . . . . . . . . . . . . . . . . . . 44
3567 . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3568 . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3569 . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3570 . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3571 thru 3572 . . . . . . . . . . . . . . . . . . . 55
3573 . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3574 . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3574C . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3575 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3576 . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3576C . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3577 thru 3578 . . . . . . . . . . . . . . . . . . . 55
3586 thru 3588 . . . . . . . . . . . . . . . . . . . 41
3590 thru 3592 . . . . . . . . . . . . . . . . . . . 98
3593 thru 3595 . . . . . . . . . . . . . . . . . . . 99
3621 thru 3622 . . . . . . . . . . . . . . . . . . . 44
4000 thru 4004 . . . . . . . . . . . . . . . . . . . 58
4005 . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4056 thru 4060 . . . . . . . . . . . . . . . . . . 142
4091 thru 4094 . . . . . . . . . . . . . . . . . . 108
4095 . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4096 thru 4109 . . . . . . . . . . . . . . . . . . 108
4116 thru 4120 . . . . . . . . . . . . . . . . . . 142
4147 thru 4196 . . . . . . . . . . . . . . . . . . 143
4198 thru 4199 . . . . . . . . . . . . . . . . . . 108
4245 . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4245C . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4246 thru 4247 . . . . . . . . . . . . . . . . . . . 45
4250 . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4258 thru 4269 . . . . . . . . . . . . . . . . . . . 74
4325 thru 4326 . . . . . . . . . . . . . . . . . . 115
4332 thru 4334 . . . . . . . . . . . . . . . . . . 114
4335 thru 4337 . . . . . . . . . . . . . . . . . . 115
4341 thru 4343 . . . . . . . . . . . . . . . . . . 132
4401 thru 4405 . . . . . . . . . . . . . . . . . . 142
4469 thru 4474 . . . . . . . . . . . . . . . . . . . 56
4513 thru 4516 . . . . . . . . . . . . . . . . . . 111
4525 thru 4527 . . . . . . . . . . . . . . . . . . . 42
4527C . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4590 thru 4600 . . . . . . . . . . . . . . . . . . 110
4601 thru 4609 . . . . . . . . . . . . . . . . . . 111
4616 thru 4617 . . . . . . . . . . . . . . . . . . 110
4618 thru 4620 . . . . . . . . . . . . . . . . . . 111
4626 . . . . . . . . . . . . . . . . . . . . . . . . . . 110
4628 . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
CAT. 1422 – 1626 PAGE CAT. PAGE CAT. PAGE
NO. NO. NO. 1627 – 3373 NO. NO. 3381 – 4628 NO.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
NUMERICAL INDEX
4628C . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4632 thru 4634 . . . . . . . . . . . . . . . . . . 110
4636 thru 4683 . . . . . . . . . . . . . . . . . . 109
4684 . . . . . . . . . . . . . . . . . . . . . . . . . . 111
4687 thru 4689 . . . . . . . . . . . . . . . . . . 132
4690 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
4691 thru 4693 . . . . . . . . . . . . . . . . . . 131
4694 . . . . . . . . . . . . . . . . . . . . . . . . . . 132
4696 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
4698 . . . . . . . . . . . . . . . . . . . . . . . . . . 132
4699 thru 4700 . . . . . . . . . . . . . . . . . . 131
4701 thru 4702 . . . . . . . . . . . . . . . . . . 132
4703 . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4704 . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4704 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
4705 . . . . . . . . . . . . . . . . . . . . . . . . . . 132
4706 . . . . . . . . . . . . . . . . . . . . . . . . . . 111
4707 thru 4711 . . . . . . . . . . . . . . . . . . 132
4712 . . . . . . . . . . . . . . . . . . . . . . . . . . 109
4713 thru 4716 . . . . . . . . . . . . . . . . . . 132
4724 thru 4730 . . . . . . . . . . . . . . . . . . 109
4732 thru 4734 . . . . . . . . . . . . . . . . . . 111
4799 thru 4841 . . . . . . . . . . . . . . . . . . . 70
4850 thru 4870 . . . . . . . . . . . . . . . . . . . 73
4900 . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4901 thru 4902 . . . . . . . . . . . . . . . . . . . 53
4903 thru 4907 . . . . . . . . . . . . . . . . . . . 52
4908 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4909 . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4910 thru 4914 . . . . . . . . . . . . . . . . . . . 53
4915 thru 4920 . . . . . . . . . . . . . . . . . . . 52
4950 thru 4954 . . . . . . . . . . . . . . . . . . . 59
4966 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5000 thru 5014 . . . . . . . . . . . . . . . . . . . 60
5015 thru 5019 . . . . . . . . . . . . . . . . . . . 61
5020 thru 5026 . . . . . . . . . . . . . . . . . . . 60
5029 . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5033 thru 5048 . . . . . . . . . . . . . . . . . . . 61
5058 thru 5065 . . . . . . . . . . . . . . . . . . . 73
5070 thru 5083 . . . . . . . . . . . . . . . . . . 123
5115 thru 5129 . . . . . . . . . . . . . . . . . . . 60
5201 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5202 thru 5204 . . . . . . . . . . . . . . . . . . . 14
5205 thru 5209 . . . . . . . . . . . . . . . . . . . 13
5210 thru 5212 . . . . . . . . . . . . . . . . . . . 15
5213 thru 5214 . . . . . . . . . . . . . . . . . . . 14
5217 thru 5223 . . . . . . . . . . . . . . . . . . . 15
5224 thru 5228 . . . . . . . . . . . . . . . . . . . 14
5230 thru 5231 . . . . . . . . . . . . . . . . . . . . 8
5240 thru 5253 . . . . . . . . . . . . . . . . . . . 16
5330 thru 5331 . . . . . . . . . . . . . . . . . . . . 8
5799 . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
6000 thru 6035 . . . . . . . . . . . . . . . . . . 104
6036 thru 6071 . . . . . . . . . . . . . . . . . . 105
6072 thru 6075 . . . . . . . . . . . . . . . . . . 106
6076 thru 6077 . . . . . . . . . . . . . . . . . . 107
6078 thru 6085 . . . . . . . . . . . . . . . . . . 106
6090 thru 6096 . . . . . . . . . . . . . . . . . . 107
6097 . . . . . . . . . . . . . . . . . . . . . . . . . . 104
6799 . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
7004 thru 7024 . . . . . . . . . . . . . . . . . . 108
7030 thru 7061 . . . . . . . . . . . . . . . . . . . 91
7140 thru 7181 . . . . . . . . . . . . . . . . . . . 87
7186 thru 7188 . . . . . . . . . . . . . . . . . . . 86
7192 thru 7194 . . . . . . . . . . . . . . . . . . . 87
7196 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
7200 thru 7225 . . . . . . . . . . . . . . . . . . . 70
7228 thru 7235 . . . . . . . . . . . . . . . . . . . 82
7235-1 thru 7235-2 . . . . . . . . . . . . . . . 131
7236 thru 7299 . . . . . . . . . . . . . . . . . . . 82
7311 thru 7340 . . . . . . . . . . . . . . . . . . . 58
7351 thru 7382 . . . . . . . . . . . . . . . . . . . 91
7600 thru 7611 . . . . . . . . . . . . . . . . . . 128
7620 thru 7640 . . . . . . . . . . . . . . . . . . 127
7661 thru 7678 . . . . . . . . . . . . . . . . . . . 74
7680 thru 7688 . . . . . . . . . . . . . . . . . . 132
7689 . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7690 thru 7693 . . . . . . . . . . . . . . . . . . . 62
7690-SEMS thru 7693-SEMS . . . . . . . . . 64
7695 thru 7696 . . . . . . . . . . . . . . . . . . . 65
7697 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7697-SEMS . . . . . . . . . . . . . . . . . . . . . . 64
7698 . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7699 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7699-SEMS . . . . . . . . . . . . . . . . . . . . . . 64
7700 thru 7702 . . . . . . . . . . . . . . . . . . . 62
7700-SEMS thru 7702-SEMS . . . . . . . . . 64
7710 thru 7720 . . . . . . . . . . . . . . . . . . . 74
7760 thru 7772 . . . . . . . . . . . . . . . . . . . 65
7773 thru 7774 . . . . . . . . . . . . . . . . . . . 62
7775 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7778 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7778-SEMS . . . . . . . . . . . . . . . . . . . . . . 64
7779 thru 7783 . . . . . . . . . . . . . . . . . . . 62
7784 thru 7791 . . . . . . . . . . . . . . . . . . . 63
7792 thru 7800 . . . . . . . . . . . . . . . . . . . 65
7802 thru 7806 . . . . . . . . . . . . . . . . . . . 54
7807 thru 7808 . . . . . . . . . . . . . . . . . . . 65
7812 thru 7836 . . . . . . . . . . . . . . . . . . . 54
8090 thru 8096 . . . . . . . . . . . . . . . . . . 127
8100 thru 8173 . . . . . . . . . . . . . . . . . . 126
8174 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
8189 thru 8195 . . . . . . . . . . . . . . . . . . . 62
8196 thru 8199 . . . . . . . . . . . . . . . . . . . 63
8189-SEMS thru 8199-SEMS . . . . . . . . . 64
8200 thru 8271 . . . . . . . . . . . . . . . . . . . 57
8272 thru 8300 . . . . . . . . . . . . . . . . . . . 56
8309 thru 8310 . . . . . . . . . . . . . . . . . . . 90
8311 thru 8342 . . . . . . . . . . . . . . . . . . . 91
8351 thru 8356 . . . . . . . . . . . . . . . . . . . 86
8400 thru 8440 . . . . . . . . . . . . . . . . . . . 70
8440A thru 8440G . . . . . . . . . . . . . . . . . 71
8441 thru 8442 . . . . . . . . . . . . . . . . . . . 71
8443 thru 8446 . . . . . . . . . . . . . . . . . . . 88
8447 thru 8457 . . . . . . . . . . . . . . . . . . . 89
8470 thru 8486 . . . . . . . . . . . . . . . . . . 128
8487 thru 8489 . . . . . . . . . . . . . . . . . . . 88
8490 thru 9496 . . . . . . . . . . . . . . . . . . 128
8497 thru 8499 . . . . . . . . . . . . . . . . . . . 88
8554 thru 8569 . . . . . . . . . . . . . . . . . . . 85
8600 thru 8613 . . . . . . . . . . . . . . . . . . 128
8615 thru 8617 . . . . . . . . . . . . . . . . . . 129
8620 thru 8644 . . . . . . . . . . . . . . . . . . 116
8645 thru 8649 . . . . . . . . . . . . . . . . . . 117
8650 thru 8692 . . . . . . . . . . . . . . . . . . . 90
8700 thru 8711 . . . . . . . . . . . . . . . . . . . 83
8712 thru 8729 . . . . . . . . . . . . . . . . . . . 70
8730 . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
8731 thru 8733 . . . . . . . . . . . . . . . . . . . 70
8737 . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
8799 . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
8800 thru 8821 . . . . . . . . . . . . . . . . . . . 76
8822 thru 8828 . . . . . . . . . . . . . . . . . . . 78
8829 thru 8842 . . . . . . . . . . . . . . . . . . . 77
8843 thru 8851 . . . . . . . . . . . . . . . . . . . 72
8860 thru 8870 . . . . . . . . . . . . . . . . . . 127
8871 thru 8875 . . . . . . . . . . . . . . . . . . . 76
8879 thru 8893 . . . . . . . . . . . . . . . . . . . 77
8900 thru 8931 . . . . . . . . . . . . . . . . . . . 91
9018 thru 9054 . . . . . . . . . . . . . . . . . . . 77
9055 thru 9084 . . . . . . . . . . . . . . . . . . . 78
9090 . . . . . . . . . . . . . . . . . . . . . . . . . . 133
9100 thru 9123 . . . . . . . . . . . . . . . . . . . 87
9190 thru 9191 . . . . . . . . . . . . . . . . . . 133
9200 thru 9204 . . . . . . . . . . . . . . . . . . 118
9205 thru 9231 . . . . . . . . . . . . . . . . . . 119
9200-1 thru 9200-5 . . . . . . . . . . . . . . . 120
9200-6 thru 9200-10 . . . . . . . . . . . . . . 121
9200-11 . . . . . . . . . . . . . . . . . . . . . . . 120
9200-12 thru 900-13 . . . . . . . . . . . . . . 121
9200-14 . . . . . . . . . . . . . . . . . . . . . . . 120
9200-15 . . . . . . . . . . . . . . . . . . . . . . . 121
9200-16 . . . . . . . . . . . . . . . . . . . . . . . 120
9200-17 . . . . . . . . . . . . . . . . . . . . . . . 121
9200-19 . . . . . . . . . . . . . . . . . . . . . . . 120
9201-1 thru 9204-1 . . . . . . . . . . . . . . . 121
9207-1 thru 9231-1 . . . . . . . . . . . . . . . 120
9300 thru 9357 . . . . . . . . . . . . . . . . . . 133
9400 thru 9457 . . . . . . . . . . . . . . . . . . 133
9500 thru 9581 . . . . . . . . . . . . . . . . . . 133
9600 thru 9604 . . . . . . . . . . . . . . . . . . 132
9605 thru 9608 . . . . . . . . . . . . . . . . . . 133
9900 thru 9911 . . . . . . . . . . . . . . . . . . . 87
9920 . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
11001 thru 11016 . . . . . . . . . . . . . . . . 105
11065 thru 11076 . . . . . . . . . . . . . . . . 136
11100 thru 11116 . . . . . . . . . . . . . . . . 137
11150 thru 11160 . . . . . . . . . . . . . . . . 136
11216 thru 11218 . . . . . . . . . . . . . . . . 136
11250 thru 11251 . . . . . . . . . . . . . . . . 136
11300 thru 11312 . . . . . . . . . . . . . . . . 136
11320 thru 11322 . . . . . . . . . . . . . . . . 136
11350 thru 11362 . . . . . . . . . . . . . . . . 137
11362-5 . . . . . . . . . . . . . . . . . . . . . . . 131
11363 thru 11513 . . . . . . . . . . . . . . . . 137
15021 thru 15099 . . . . . . . . . . . . . . . . 140
15101 thru 15130 . . . . . . . . . . . . . . . . 142
15221 thru 15299 . . . . . . . . . . . . . . . . 140
15301 thru 15330 . . . . . . . . . . . . . . . . 142
15401 thru 15545 . . . . . . . . . . . . . . . . 141
24283 thru 24306 . . . . . . . . . . . . . . . . . 72
24307 thru 24330 . . . . . . . . . . . . . . . . . 72
24331 thru 24354 . . . . . . . . . . . . . . . . . 72
24380 thru 24418 . . . . . . . . . . . . . . . . . 72
24420 thru 24458 . . . . . . . . . . . . . . . . . 72
24460 thru 24498 . . . . . . . . . . . . . . . . . 72
25501 thru 25515 . . . . . . . . . . . . . . . . . 72
25521 thru 25535 . . . . . . . . . . . . . . . . . 72
29301 thru 29328 . . . . . . . . . . . . . . . . . 72
29331 thru 29358 . . . . . . . . . . . . . . . . . 72
CBH. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
MS27249-1B1 thru -5B5. . . . . . . . . . . . 141
MS27249-1E1 thru 5E5 . . . . . . . . . . . . 141
PC104 . . . . . . . . . . . . . . . . . . . . . . . . . . 70
SCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
SPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
STH . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
STR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
TL-1 thru TL-2 . . . . . . . . . . . . . . . . . . . . 138
TL-3 thru TL-4 . . . . . . . . . . . . . . . . . . . . 139
TL-5 thru TL-8 . . . . . . . . . . . . . . . . . . . . 138
TL-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
TL-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 123
TL-12 . . . . . . . . . . . . . . . . . . . . . . . . . . 139
TL-19 thru TL-22 . . . . . . . . . . . . . . . . . . . 73
CAT. 4628C – 7689 PAGE CAT. PAGE CAT. PAGE
NO. NO. NO. 7690 – 9200-17 NO. NO. 9200-19 – TL-22 NO.
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
®
For over sixty years, Keystone has
been designing and manufacturing quality
interconnects and electronic hardware. Our
engineering and design specialists utilize
the most advanced design and production
capabilities such as 3D CAD modeling to
develop innovative and reliable products
for the marketplace. Add to this a commit-
ment to solving design challenges, backed
by skilled and experienced production and customer service teams.
Precision tool and die CAD/CAM capabilities, close tolerance
stamping, machining and assembly, computer based quality control
and responsive customer service are all vital in-house resources which
constitute Keystone’s capabilities.
While our catalog products meet most standard requirements, our Application Engineering Group
is always available to modify our existing items or to design and develop specific products for
your applications.
Our products are in compliance with the RoHS and REACH directives and our quality system is ISO
9001:2008 certified. It is Keystone’s quality policy to continuously improve its products to better
satisfy the needs of its customers and to deliver quality products, every time, on time.
Visit our website at www.keyelco.com for additional information and on-line services, such as:
•Stock Check Capabilities •Engineering Drawing requests
•Sample and Quotation requests
•Complete listing of our Authorized Stocking Distributors worldwide
Keystone components are guaranteed to be free from defects in material and workmanship for
a reasonable period of time after delivery. Our liability shall be limited to replacement of defective
material only. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct
or consequential, rising out of the use of or the inability to use the products. Before using, user
shall determine the suitability of the product for their intended use, user assumes all risk and
liability whatsoever in connection therewith.
We reserve the right to change specifications on any and all items shown in this catalog or any
supplements without prior notice providing the performance or appearance will not change the
function of the item.
Keystone has carefully prepared the catalog specifications contained herein. These specifica-
tions are for reference only, any inaccuracies may be due to typographical errors or changes
made after the publication of this catalog.
© Copyright 2013 by Keystone Electronics Corp. Printed in U.S.A.
All products unconditionally guaranteed against defects in material and workmanship.
FEDERAL SUPPLY CODE
FSCM
91833
Corporate and Manufacturing Headquarters
31-07 20th Road, Astoria, New York 11105-2017
Tel: (718) 956-8900 s (800) 221-5510 s Fax: (718) 956-9040
Website: www.keyelco.com s e-mail: kec@keyelco.com
INTERNATIONAL OFFICES
KEYSTONE/EUROPE (EMEA)
80, Rue Orfila,
75020 Paris, France
Tel: 33 (1) 46 36 82 49
Fax: 33 (1) 46 36 81 57
KEYSTONE/ASIA – PACIFIC
Flat E, 5/F., Everest Industrial Centre
No.396 Kwun Tong Road,
Kowloon, Hong Kong
Tel: +852 2305 2229
Fax: +852 2305 2666
KEYSTONE/AUSTRALIA
10 Gray Street
Kilkenny, South Australia 5009
Tel: 61-8-8268-2733
Fax: 61-8-8268-1455
KEYSTONE/CANADA
250 Granton Drive
Richmond Hill, Ontario
Canada L4B1H7
Tel: (905) 764-0040
Fax: (905) 764-0076
®
DISTRIBUTED BY:
There’s a keystone in every great invention … Follow, THiNK & Learn at:
