ALUMINUM ELECTROLYTIC CAPACITORS UR Chip Type, High CV series Chip type, higher capacitance in larger case sizes. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC). WS High Temperature Reflow UG UR Extended range Higher C/V WX Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current - 40 to +85C 4 to 100V 3.3 to 1500F 20% at 120Hz, 20C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (A) . Measurement frequency : 120Hz, Temperature : 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 4 0.35 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.12 100 0.12 Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C 4 7 15 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20C. Marking Black print on the case top. Within 10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 100F) Chip Type 1 (6.3, 8 x 6.2) Capacitance Positive C0.2 3 4 5 6 7 8 9 10 11 12 13 14 Package code A0.2 Size code Configuration E B0.2 D0.5 H Rated capacitance (100F) Rated voltage (10V) Negative Series name 6V . Type (8 x 10, 10 x 10) A0.2 A0.2 E B0.2 N2 220 16V L0.5 Pressure relief vent DxL 0.5MAX. C0.2 2 Voltage D0.5 Lot No. Code CL CL CL NL NL (mm) Positive Plastic platform 0.3MAX. Capacitance Trade mark DxL 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 Capacitance tolerance (20%) A0.2 N2 100 10V L0.3 1 Size 8 x 6.2 only 2 Voltage mark for 6.3V is 2 UUR 1 A 1 0 1 M C L 1GS 0.5MAX. Plastic platform 0.3MAX. 2Voltage Lot No. 1 Trade mark Capacitance change tan Leakage current A B C E L H 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 2.4 6.6 6.6 2.2 5.8 0.5 to 0.8 2.4 6.6 6.6 2.2 7.7 0.5 to 0.8 3.3 8.3 8.3 2.3 6.2 0.5 to 0.8 2.9 8.3 8.3 3.1 10 0.8 to 1.1 3.2 10.3 10.3 4.5 10 0.8 to 1.1 Negative H Dimension table in next page. CAT.8100Y ALUMINUM ELECTROLYTIC CAPACITORS UR series Dimensions V Code Cap.(F) 3.3 3R3 4.7 4R7 4 6.3 10 16 25 35 50 63 0G 0J 1A 1C 1E 1V 1H 1J 100 2A 6.3 x 5.8 10 100 22 220 33 330 47 470 100 101 150 151 220 221 330 331 6.3 x 5.8 470 471 680 681 1000 1500 6.3 x 5.8 70 8 x 6.2 125 6.3 x 5.8 85 6.3 x 7.7 46 8 x 10. 77 96 8 x 10. 100 55 8 x 10. 8 x 6.2 105 (94) 8 x 10. 8 x 10. 175 (132) 10 x 10. 195 (181) 10 x 10. 117 10 x 10. 130 140 10 x 10. 155 151 8 x 10. 8 x 10. 10 x 10. 238 289 290 8 x 10. 215 (162) 10 x 10. 250 (232) 10 x 10. 265 (246) 10 x 10. 8 x 10. 270 10 x 10. 305 (284) 10 x 10. 324 10 x 10. 330 (307) 10 x 10. 393 374 10 x 10. 152 8 x 6.2 160 (143) 8 x 6.2 190 (188) 8 x 10. 240 6.3 x 7.7 200 8 x 10. 8 x 10. 8 x 10. 284 8 x 10. 102 8 x 10. 344 318 10 x 10. 10 x 10. 400 (372) 10 x 10. 152 10 x 10. 347 10 x 10. 265 8 x 6.2 175 (173) 192 29 8 x 6.2 40 (35) 8 x 6.2 45 8 x 6.2 95 (94) 8 x 10. 140 (105) 6.3 x 5.8 65 8 x 6.2 145 (143) 31 8 x 10. 6.3 x 5.8 6.3 x 5.8 6.3 x 5.8 214 232 396 454 489 Case size D x L (mm) Size 6.3 x 5.8 is available for capacitors marked. " " Size 6.3 x 7.7 is available for capacitors marked. " " Size 8 x 10 is available for capacitors marked. " " In this case, 6 will be put at 12th digit of type numbering system. Rated ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Cap.(F) Frequency 00 Less than 47V 100 to 1500 50 Hz 0.80 0.85 120 Hz 1.00 1.00 300 Hz 1.15 1.08 1 kHz 1.40 1.20 10 kHz or more 1.67 1.30 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please select UG(p.100) series if high CV products are required. Please refer to page 3 for the minimum order quantity. CAT.8100Y