56
TLN
Type
6
Case Size
See table
above
228
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
M
Tolerance
M = ±20%
006
Rated DC Voltage
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
HOW TO ORDER
R
Packaging
R = Pure Tin 7" Reel
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 680 μF to 3300 μF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.01CV
Rated Voltage (VR) -55°C +40°C: 4 6.3 10
Category Voltage (VC) at 85°C: 2 3.15 5
Category Voltage (VC) at 125°C: 0.8 1.26 2
Temperature Range: -55°C to +125°C with category voltage
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVRwith 0.1Ω/V series impedance with
60% confidence level
TECHNICAL SPECIFICATIONS
TLN PulseCapTM Series
Tantalum Solid Electrolytic Chip Capacitors Undertab Series
0055
ESR in mΩ
• Large case size for maximum capacitance
• 3x reflow 260°C compatible
• Low profile solution
• Consumer applications
(e.g. PCMCIA/USB wireless express cards etc.)
• CV range: 1000-3300μF / 4-10V
• 2 case sizes available
For part marking see page 130
CASE DIMENSIONS: millimeters (inches)
Code EIA EIA L+0.50 (0.020) W+0.20 (0.008) H max. W1±0.20 A+0.30 (0.012)
Code Metric -0.00 (0.000) -0.10 (0.004) (0.008) -0.20 (0.008)
42924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 2.00 (0.079)
7.50
66030 15075-20 14.50 (0.571) 2.00 (0.079) 5.50 (0.217) 2.40 (0.094)
(0.295 )
W1 dimension applies to the termination width for A dimensional area only.
LEAD-FREE COMPATIBLE
COMPONENT
+0.50
-0.00
+0.020
-0.000
57
Capacitance Voltage Rating DC (VR) to 85°C
μF Code 4V (G) 6.3V (J) 10V (A)
680 687 4(200)*
1000 108 4(100)/6(55)
1500 158 4(100) 6(55)
2200 228 6(55)
3300 338 6(55) 6*
CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE
(FIGURE DENOTES CASE SIZE)
TLN PulseCapTM Series
Tantalum Solid Electrolytic Chip Capacitors Undertab Series
Available Codes (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development – subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
Voltage vs Temperature Rating
100% 100%
33%
67%
50%
20%
80% 80%
0%
20%
40%
60%
80%
100%
120%
-55°C 40°C0°C 60°C 85°C 125°C105°C
rated range
recommended derating
RATINGS & PART NUMBER REFERENCE
Rated DCL ESR 100kHz Ripple Current (mA) 100kHz Ripple Voltage (mV)
AVX Case Cap Voltage (μA) Max. (mΩ) MSL
Part No. Size (μF) (V) Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
4 Volt @ 40ºC (2 Volt @ 85ºC, 0.8 Volt @ 125ºC)
TLN6338M004#0055 6 3300 4 132 55 3 2045 1840 818 112 101 45
6.3 Volt @ 40ºC (3.15 Volt @ 85ºC, 1.26 Volt @ 125ºC)
TLN4158M006#0100 4 1500 6.3 90 100 3 1285 1156 514 128 116 51
TLN6228M006#0055 6 2200 6.3 132 55 3 2045 1840 818 112 101 45
10 Volt @ 40ºC (5 Volt @ 85ºC, 2 Volt @ 125ºC)
TLN4108M010#0100 4 1000 10 100 100 3 1285 1156 514 128 116 51
TLN6108M010#0055 6 1000 10 100 55 3 2045 1840 818 112 101 45
TLN6158M010#0055 6 1500 10 150 55 3 2045 1840 818 112 101 45
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalogue limit post mounting
DCL allowed to move up to 2.00 times catalogue limit post mounting
For typical weight and composition see page 123.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
