Embedded Power for Business-Critical Continuity Rev.06.03.10_105 DA12-M Series 1 of 5 DA12-M Series 12 Watts Total Power: Input Voltage: # of Outputs: 12 Watts 90 - 264 Vac Single Preliminary Interchangeable Plug Special Features *5 V and 12 V versions *Medical and ITE Safeties *Switching wallmount power supply *Available in interchangeable & fixed ac plug configurations *CE Mark EMC & LVD *Universal AC input *Fully regulated output *Overload and short circuit protection *Thermal protection *Energy Star 2.0 and CeC approvals *Efficiency level V *Constant voltage *High MTBF *Built in EMI filter (CISPR 22 Class B) Safety *UL 60950, 60601-1 *cUL 60950, 60601-1 *TUV 60950-1, 60601-1 *AS/NZS 60950-1, 60601-1 *CB Certificate and report *CE EMC & LVD *PSE Denan (US only) Electrical Specifications Input Input range: 90 - 264 Vac (wide range) Frequency: 47 - 63 Hz Inrush current: 28 A @ 264 Vac Input current: 0.25 A rms @ 120 Vac; 0.15 A @ 240 Vac EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 100 A @ 50/60 Hz, 264 Vac input Safety ground leakage current: Output Voltage (Vo): 5.0 V and 12.0 V Voltage regulation: 5% @ constant voltage mode Maximum Power (Po): 12 W for 12 V models, 10 W for 5 V models Hold-up time: 10 ms. typical at full load @ 230 Vac Overvoltage protection: Non-latching type Overload protection: Output shortcircuit protection auto recover Overload protected @ 150% above maximum rating Auto recovery Overtemperature protection: Output cable/connector barrel polarity: DC cable with 2.5 mm x5.5mm barrel plug DC plug center +v DC plug outer -v Embedded Power for Business-Critical Continuity Environmental Specifications Rev.06.03.10_105 DA12-M Series 2 of 5 Operating temperature: 0 to +40 C ambient Storage temperature: -40 C to +85 C Electromagnetic susceptibility: Humidity: Vibration: Designed to meet EN55024 Operating; non-condensing 5% to 95% RH Frequency/PSD:5 - 350 Hz 0.0001 g2/Hz 350 - 500 Hz - 6dB/Oct. 500 Hz 0.00005g2/Hz Acceleration: 0.21 gRMS Duration: 20 min per second AC Plug Configuration AC Plug Configuration for Fixed Plug for Interchangeable Plug U.S. 2-prong US U.S. 2-prong DA-US Europe 2-prong EU Europe 2-prong DA-EU UK AU United Kingdom 3-prong Australia 2-prong C8 - 2 receptacle DA-UK DA-AU DA-C8 United Kingdom 3-prong Australia 2-prong Ordering Information - DA12 Adapter Model Number Maximum Power Output Voltage Regulation2 Ripple P/P (PARD)3 DA12-120US-M 12 W 12.0 V 0.2 A DA12-120EU-M 12 W 12.0 V 0.2 A 1.0 3% 200 mV 1.0 3% DA12-120UK-M 12 W 12.0 V 200 mV 0.2 A 1.0 3% 200 mV Minimum Load Maximum Load DA12-120AU-M 12 W 12.0 V 0.2 A 1.0 3% 200 mV DA12-120MP-M* 12 W 12.0 V 0.2 A 1.0 3% 200 mV DA12-050US-M 10 W 5.0 V 0.2 A 2.0 3% 50 mV DA12-050EU-M 10 W 5.0 V 0.2 A 2.0 3% 50 mV DA12-050UK-M 10 W 5.0 V 0.2 A 2.0 3% 50 mV DA12-050AU-M 10 W 5.0 V 0.2 A 2.0 3% 50 mV DA12-050MP-M* 10 W 5.0 V 0.2 A 2.0 3% * Interchangeable version - AC Plugs must be purchased separately to be used with DA12-120MP-M and DA12-050MP-M 50 mV Ordering Information - DA12 Interchangeable Plug Model Number DA-US DA-EU DA-UK DA-AU DA-C8 DA-All Includes All of the Above 1.Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2.At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3.Peak-to-peak with 20 mHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 4.Power supplies will operate with no-load. Embedded Power for Business-Critical Continuity Rev.06.03.10_105 DA12-M Series 3 of 5 Mechanical Drawings DA12-XXXUS-M 1.99" (50,6) 0.63" (16) 1.78" (45,3) 2.65" (67,3) 59" (1500) 1.10" (28) 2.36" (60) (-) (+) CONNECTOR PIN-OUT DETAIL DA12-XXXAU-M 1.10" (28 0,3) 2.36" (60) (-) (+) CONNECTOR PIN-OUT DETAIL 2.14" (54,3) 0.67" (17,1) 2.8" (71,4) 59" (1500) Embedded Power for Business-Critical Continuity DA12-XXXEU-M Rev.06.03.10_105 DA12-M Series 4 of 5 2.36" (60) 3.22" (82) 59" (1500) 1.10" (28) 0.744" (18,9) 0.685" (17,4) (-) (+) CONNECTOR PIN-OUT DETAIL DA12-XXXUK-M 1.98" (50.2) 2.36" (60) 0.893" (22,7) 1.90" (48,3) 59" (1500) (-) (+) CONNECTOR PIN-OUT DETAIL Embedded Power for Business-Critical Continuity DA12-MP Interchangeable Plug Adapter 1.10" (28) 2.36" (60) 2.06" (52.22) 59" (1500) Americas Rev.06.03.10_105 DA12-M Series 5 of 5 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone:+1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) 1.58" (40.18) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone:+44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) DA-US DA-UK DA-EU 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone:+852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. DA-AU DA-C8 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is .02". 3. Weight: 0.25 lb/0.114 kg 4. Warranty: 2 years Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2009 Emerson Electric Co.