6015 SERIES 1-7/16 In. Dia. Servo Mount PRECISION POSITION SENSORS STANDARD PRODUCT OFFERING MS PART NUMBER RESISTANCE 6015-1000-030 6015-1002-030 6015-1003-030 20 1K 10% 5K 10% 10K 10% .072 .005 .093 .005 .062 .005 .390 .010 .2498 .2494 20 3 2 1 .915 MAX. 1.437 .005 1.3125 1.3115 1.312 MAX. .625 .032 STANDARD MODEL ELECTRICAL CHARACTERISTICS RESISTANCE: ACTIVE ELECTRICAL ANGLE: ELECTRICAL CONTINUITY ANGLE: INDEPENDENT LINEARITY: END VOLTAGE: VOLTAGE RESOLUTION: OUTPUT SMOOTHNESS: RESISTANCE TEMP. COEFFICIENT: POWER RATING @ 70C: WIPER CONTACT CURRENT: DIELECTRIC STRENGTH: INSULATION RESISTANCE: 1k to 10k 10% 340 344 MIN. 0.5% 0.5% MAX. VIRTUALLY INFINITE 0.1% MAX. 400PPM/C MAX. 2 WATTS MAX. 10 MilliAmps MAX. 1000 VRMS @ 60Hz 100 Meg MIN. @ 500VDC .750 MAX. STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: ROTATIONAL OPERATING LIFE: SCHEMATIC DIAGRAM 2 STANDARD MODEL MECHANICAL CHARACTERISTICS MECHANICAL ROTATION: STARTING TORQUE: RUNNING TORQUE: TOTAL WEIGHT (1-GANG): PILOT RUNOUT: SHAFT RUNOUT: SHAFT END PLAY: SHAFT RADIAL PLAY: LATERAL RUNOUT: -65C To +125C 100 x 106 REVOLUTIONS MIN. CW CONTINUOUS 0.30 Oz.-In. MAX. 0.20 Oz.-In. MAX. 2.0 Oz. MAX. 0.001 In. TIR 0.001 In. TIR 0.003 MAX. 0.001 In. TIR 0.002 In. TIR 3 1 VIEWED FROM SHAFT END ALL OTHER GENERAL REQUIREMENTS IN ACCORDANCE WITH MIL-PRF-39023 STANDARD MATERIALS OF CONSTRUCTION HOUSING AND COVER: SHAFT AND BALL BEARINGS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: SOLDER TERMINALS: ANODIZED ALUMINUM STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL GOLD PLATED BRASS Position Sensor Products precisionsensors.meas-spec.com 424 Crown Point Circle, Grass Valley, CA 95945 Ph: 530.273.4608 Fax: 530.273.0769 8-7-13 www.meas-spec.com 6015 SERIES 1-7/16 In. Dia. Servo Mount PRECISION POSITION SENSORS ANODIZED ALUMINUM HOUSING STAINLESS STEEL PRECISION SHAFT TURRET-STYLE SOLDER TERMINALS SHAFT INSULATOR ANODIZED ALUMINUM COVER STAINLESS STEEL PRECISION BALL BEARINGS CO-MOLDED RESISTANCE ELEMENT STANDARD ELECTRICAL CHARACTERISTICS RESISTANCES (10%): ACTIVE ELECTRICAL ANGLE: ELECTRICAL CONTINUITY ANGLE: INDEPENDENT LINEARITY: END VOLTAGE: VOLTAGE RESOLUTION: OUTPUT SMOOTHNESS: RESISTANCE TEMP. COEFFICIENT: POWER RATING @ 70C: WIPER CONTACT CURRENT: DIELECTRIC STRENGTH: INSULATION RESISTANCE: 1K, 5K, and 10k 340 344 MIN. 0.5% 0.5% MAX. VIRTUALLY INFINITE 0.1% MAX. 400PPM/C MAX. 2 WATTS MAX. 10 MilliAmps MAX. 1000 VRMS @ 60Hz 100 Meg MIN. @ 500VDC STANDARD MECHANICAL CHARACTERISTICS MECHANICAL ROTATION: STARTING TORQUE: RUNNING TORQUE: TOTAL WEIGHT (1-GANG): PILOT RUNOUT: SHAFT RUNOUT: SHAFT END PLAY: SHAFT RADIAL PLAY: LATERAL RUNOUT: HOUSING AND COVER: SHAFT AND BALL BEARINGS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: SOLDER TERMINALS: ADDITIONAL TAPS, CURRENT OR VOLTAGE CURRENT LIMIT RESISTORS AND OTHER INTERNAL CIRCUIT COMPONENTS (CAPS, DIODES, ETC.) MULTI-GANG CONSTRUCTION (UP TO 6) ON A COMMON SHAFT OR CONCENTRIC SHAFTING (ADD .320 LENGTH PER GANG). ANODIZED ALUMINUM STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL GOLD PLATED BRASS Position Sensor Products precisionsensors.meas-spec.com SPECIAL LINEARITIES AS LOW AS 0.075%, ABSOLUTE (INDEXED) OR INDEPENDENT OVER SPECIFIED REGION. SPECIAL TRANSFER FUNCTIONS: NON-LINEAR OUTPUTS LOAD COMPENSATION TRIG, LOG, AND EXPONENTIAL OUTPUTS -65C To +125C 100 x 10 6 REVOLUTIONS MIN. ALL OTHER GENERAL REQUIREMENTS IN ACCORDANCE WITH MIL-PRF-39023 CUSTOM RESISTANCE VALUES (500 TO 60k) AND TOLERANCES AS LOW AS 5% WIRE LEADS OR CABLE IN PLACE OF TERMINALS CONTINUOUS 0.30 Oz.-In. MAX. 0.20 Oz.-In. MAX. 1.6 Oz. MAX. 0.001 In. TIR 0.001 In. TIR 0.003 MAX. 0.001 In. TIR 0.002 In. TIR STANDARD MATERIALS OF CONSTRUCTION AVAILABLE OPTIONS SPECIAL ELECTRICAL ANGLES UP TO 355 MAX. STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: ROTATIONAL OPERATING LIFE: WELDED MULTI-FINGER PRECIOUS METAL CONTACTS SPECIAL SHAFT LENGTHS AND FEATURES SUCH AS REAR EXTENSIONS, FLATS, SLOTS, AND STEPS. SPECIAL TORQUE OR DETENT REQUIREMENTS SPECIAL MOUNTING DIMENSIONS OR FEATURES INCLUDING ANTI-ROTATION PINS, BOLT FLANGES, AND THREADED HOLES. ROTATIONAL STOPS LIMITING SHAFT TRAVEL. ANCILLIARY DEVICES SUCH AS SPRING RETURNS, CLUTCHES, BRAKES, AND SWITCHES. SPECIAL ENVIRONMENTAL CAPABILITES SUCH AS MOISTURE SEALS, HIGH SHOCK AND VIBRATION. 424 Crown Point Circle, Grass Valley, CA 95945 Ph: 530.273.4608 Fax: 530.273.0769 8-7-13 www.meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 6015-1002-030