EXB30-24D3V3-2V5 - Emerson - Product.Network

DC-DC CONVERTERS 30 W High Efficiency DC-DC Converters 1

2 YEAR WARRANTY

EXB30 Series

Dual positive output

•Two independent positive outputs

•Output voltage tracking

•High efficiency

•Approved to EN60950, UL1950, CSA C22.2 No. 950

•Operating ambient temperature of -40 °C to +70 °C

(natural convection)

•Up to 100% load imbalance

•Separate trim on each output

•No minimum load

•Complies with ETS 300 019-1-3/2-3

•Fully compliant with ETS 300 386-1

•Available RoHS compliant

The EXB30 Dual series are isolated dual positive-output dc-dc converters. The products are designed

using a high-efficiency synchronous rectification topology. They feature two independent fully regulated

outputs, which are individually trimmable. The EXB30 Dual employs Dynamic Current Allocation such

that maximum current can be drawn from either output with a total output current capability of 6 A. No

minimum load is required for either output. In addition, these products incorporate a tracking feature

such that both outputs rise together with their output differential never exceeding 0.7 Volts during start-

up. A remote ON/OFF and latching overvoltage protection for both outputs are included as standard.

These latches are enabled by default, but can be disabled by the user.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated

EMC CHARACTERISTICS

ETS 300 386-1 table 5

Conducted emissions EN55022 with external filter Level A

EN55022 with external filter Level B

Radiated emissions EN55022 (See App. Note 109) Level B

Immunity:

ESD air EN61000-4-2 8 kV (NP), 15 kV (RP)

ESD contact EN61000-4-2 6 kV (NP), 8 kV (RP)

EFT DC power EN61000-4-4 2 kV (NP), 4 kV (LFS)

EFT signal EN61000-4-4 1 kV (NP), 2 kV (LFS)

Radiated field enclosure EN61000-4-3 10 V/m (NP)

Surges indoor signal EN61000-4-5 500 V (RP)

Conducted (DC power) EN61000-4-6 10 V (NP)

Conducted (signal) EN61000-4-6 10 V (NP)

Input transients ETS 300 132-2, ETR 283

GENERAL SPECIFICATIONS

Efficiency See table

Basic insulation Input/output 1500 Vdc

Input fuse 24 V (See Note 4) 3.5 A slow blow

Input fuse 48 V 2.0 A slow blow

Switching frequency Fixed 280 kHz

Approvals and EN60950

standards Bi-national UL1950

(See Notes 4, 6) CSA C22.2 No. 950

Weight 52 g (1.84 oz)

MTBF (See Application MIL-HDBK-217 6,283,000 hours

Note 109)

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -40 °C to +70 °C,

temperature See curves

Non-operating -55 °C to +105 °C

ETS 300 019-2-3 Classes T3.1 to T3.5

Air temperature Low: IEC 68-2-1 -40 °C

High: IEC 68-2-2 +70 °C

Change: IEC 68-2-14 -40 °C to +70 °C

Relative humidity IEC 68-2-56 10% to 100% RH

IEC 68-2-30 condensation

OUTPUT SPECIFICATIONS

Voltage adjustability Both outputs ±11% min.

Voltage accuracy Both outputs ±1.5% max.

Line regulation Low line to high line Vout1 ±0.4%

Low line to high line Vout2 ±0.4%

Load regulation Full load to no load ±0.4%

Minimum load Both outputs 0%

Ripple and noise 150 mV pk-pk max.

20 MHz bandwidth 30 mV rms max.

Temperature coefficient ±0.02%/°C

Transient response 50% to 75% and back 150 mV

peak dev. settling time to 1.0%, no external cap. 400 µs

Short circuit protection Both outputs Continuous

Isc 8 Arms (See Note 3) automatic recovery

Tracking Max. differential 0.7 V during

start-up and in operation

INPUT SPECIFICATIONS

Input voltage range 24 Vin nominal 18-36 Vdc

48 Vin nominal 36-75 Vdc

Input current No load 150 mA max.

Remote OFF 4 mA max.

UVLO turn ON voltage All inputs (See Note 2) 94% typ.

UVLO turn OFF voltage All inputs (See Note 2) 86% typ.

Start-up time Nominal line 20 ms max.

Active high remote ON/OFF

Logic compatibility Open Collector ref. to -input

ON Open circuit voltage 4.5 Vdc

OFF 0.6 Vdc

SPECIFICATIONS

File Name: exb30d.pdf Rev (02): 05 Dec 2005

TRIM

- OUT

+ OUT

- OUT

TRIM

DOWN

TRIM

+ OUT

EXTERNAL OUTPUT TRIMMING

All models can be externally trimmed by ±11%

using either method shown below.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

NNootteess

1Latching OVP response time is 1 ms (typical). OVP latch is reset by

toggling remote ON/OFF or by recycling the input voltage.

2Figures are percentage of minimum input voltage.

3Rshort ≤20 mΩ.

4User must provide recommended fuses in order to comply with safety

approvals.

5Maximum continuous output power.

30 Watts for D05-3V3J models

20 Watts for D3V3-2V5J models.

6Maximum temperature on hot spots not to exceed 120 °C. See Application

Note 109 on our website for details.

7The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

8NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

EXB30 Series

Dual positive output

DC-DC CONVERTERS 30 W High Efficiency DC-DC Converters 2

File Name: exb30d.pdf Rev (02): 05 Dec 2005

INPUT OUTPUT VOLTAGE OUTPUT CURRENT (5) OVP (1) TYPICAL MODEL

VOLTAGE 1 2 1 2 1 2 EFFICIENCY NUMBER

(7,8)

18-36 Vdc 5 V 3.3 V 6 A 6 A 6.25 V 4.13 V 87% EXB30-24D05-3V3J

18-36 Vdc 3.3 V 2.5 V 6 A 6 A 4.13 V 3.13 V 85% EXB30-24D3V3-2V5J

36-75 Vdc 5 V 3.3 V 6 A 6 A 6.25 V 4.13 V 88% EXB30-48D05-3V3J

36-75 Vdc 3.3 V 2.5 V 6 A 6 A 4.13 V 3.13 V 85% EXB30-48D3V3-2V5J

Output

current

Io1+Io2

(max)

-40°C 70° 100°C

SOA

Tamb

CAUTION: Hazardous internal voltages and high temperatures.

Ensure that unit is not user accessible.

International Safety Standard Approvals

UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950

File No. E1741404

VDE Licence No. 122485. File No. 10401-3336-0157

CB Report and Certificate to IEC60950, Certificate No. DE1-31103

Datasheet © Artesyn Technologies

2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

PIN CONNECTIONS

PIN NUMBER FUNCTION

1- Vin

2 No Pin

3 Remote ON/OFF

4+ Vin

5 OP1 Trim

6 OP1 Return

7 OP1

8 OP2 Trim

9 OP2 Return

10 OP2

EXB30 Series

Dual positive output

DC-DC CONVERTERS 30 W High Efficiency DC-DC Converters 2

Please consult our website for the following items:  Application Note  Longform Data Sheet www.artesyn.com

File Name: exb30d.pdf Rev (02): 05 Dec 2005

1.900

(48.26)

BOTTOM VIEW

ALL DIMENSIONS IN INCHES (mm)

GENERAL TOLERANCE ±0.01in (±0.25mm)

EXCEPT WHERE SPECIFIED OTHERWISE

2.280

(57.91)

2.400

(60.96)

2.000

(50.80)

1.400

(35.56)

1.000

(25.40)

0.500

(12.70)

0.138

(3.50)

0.024

(0.61)

MIN.

0.500

(12.70)

Max.

0.480

(12.20)

Max.

0.020

(0.51)

PLACES

Ø0.040 ±0.002

(Ø1.02 ±0.05)

9 PLACES

0.400

(10.16)

0.300

(7.62)

0.600

(15.24)

1.000

(25.40)

1.300

(33.02)

1.600

(40.64)

±0.02

(±0.5)

±0.02

±0.5

MINIMUM CLEARANCE FROM

BOTTOM OF CONVERTER TO

LOWEST COMPONENT

MAX OPEN-FRAME

CONVERTER HEIGHT