12-2015, Rev. 1215
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
General Purpose Relays
PCB Relays
n 5 to 10A rating
n 1 form A (NO) and 1 form C (CO) contact arrangements
n Sensitive coil available for 1 form A type
Typical applications
Appliances, HVAC, refrigerators, microwave ovens
Approvals
VDE 119568, UL E82292, CQC08001023449
Technical data of approved types on request
Contact Data
Contact arrangement 1 Form A (NO)
Rated voltage 30VDC, 277VAC
Max. switching voltage 30VDC, 277VAC
Rated current 5 to 10A
Contact material AgSnO2
Min. recommended contact load 100mA, 5VDC
Frequency of operation 360 ops./h
Operate/release time max. 10/5ms
Electrical endurance
D type: 5A, 277VAC resistive, -30°C to +70°C100x103 ops.
L type: 5A, 277VAC resistive, -30°C to +70°C 30x103 ops.
D/L-WG type: 5A, 250VAC resistive, -40°C to +85°C 100x103 ops.
Contact ratings
Type Contact Load Cycles
IEC 61810
PCH-..2M-WG A (NO) 5A 250VAC res, 85°C 100x103
PCH-..D2-WG A of C 5A 250VAC res, 85°C 100x103
PCH-..D2M A (NO) 5A 250VAC res, 70°C 100x103
PCH-..L2M A (NO) 5A 250VAC res, 70°C 30x103
PCH-..D2 C (CO) 5A/3A 250VAC res, 40°C 30x103
UL 508
PCH A (NO) 10A 125VAC res, 85°C 100x103
PCH A (NO) 5A 250VAC general use, 85°C 100x103
Mechanical endurance, DC coil 10x106 operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 2
Coil insulation system according UL Class F
Coil Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10 % mW
Sensitive type (for form A type only)
003 3 2.25 0.15 45 200
005 5 3.75 0.25 125 200
006 6 4.50 0.30 180 200
009 9 6.75 0.45 405 200
012 12 9.00 0.60 720 200
018 18 13.50 0.90 1620 200
024 24 18.00 1.20 2880 200
048 48 36.00 2.40 11520 200
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10 % mW
Standard type
003 3 2.10 0.15 23 400
005 5 3.50 0.25 63 400
006 6 4.20 0.30 90 400
009 9 6.30 0.45 202 400
012 12 8.40 0.60 360 400
018 18 12.60 0.90 810 400
024 24 16.80 1.20 1440 400
048 48 33.60 2.40 5760 400
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Miniature PCB Relay PCH
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Reference Data
*Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW.
*Please contact with us about the graph of expected electrical life.
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Reference Data
*Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW.
*Please contact with us about the graph of expected electrical life.
Z
V
F_PCH_B
12-2015, Rev. 1215
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay PCH (Continued)
Insulation Data
Initial dielectric strength
between open contacts 750Vrms
between contact and coil 4000Vrms
Initial surge withstand voltage
between contact and coil 10000Vrms
Clearance/creepage
between contact and coil NO: ≥ 4.9mm / 6.6mm
between contact and coil CO: ≥ 4mm / 5mm
Tracking index of relay base
standard type PTI 175
WG txype PTI 250
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40°C to +85°C
Category of environmental protection
IEC 61810 RTII - flux tight
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 7g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100 pcs., carton box/1000 pcs.
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Ordering Information for Relays
Example Part No.
PCH -1 12 D 2 M H ,000
1. Basic Series
PCH = Compact PCB mount type
2. Poles
1 = 1pole
3. Coil Voltage
05 = 5VDC 12= 12VDC
06 = 6VDC 24 = 24VDC
09 = 9VDC 48 = 48VDC*
4. Coil Power
D = 400mW (1a,1c)
L = 200mW (1a)
5. Contact Material
2 = AgSnO
2
6. Contact Arrangement
blank = 1c
M = 1a
7. Enclosure
blank = Flux Proof
H = Wash Tight
8. Suffix
,000 = Standard model
Other
Suffix = Custom model
*Coil voltage: 48VDC only can chose 400mW type.
Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm
Outline Dimensions
(
mm
)
1c*
*1a Outline dimensions is omitted.
Wiring Diagram
(
Bottom
View
)
1c 1a
PC Board Layout (mm) (Bottom View)
1c
1a
Terminal assignment
Bottom view on solder pins
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Ordering Information for Relays
Example Part No.
PCH -1 12 D 2 M H ,000
1. Basic Series
PCH = Compact PCB mount type
2. Poles
1 = 1pole
3. Coil Voltage
05 = 5VDC 12= 12VDC
06 = 6VDC 24 = 24VDC
09 = 9VDC 48 = 48VDC*
4. Coil Power
D = 400mW (1a,1c)
L = 200mW (1a)
5. Contact Material
2 = AgSnO
2
6. Contact Arrangement
blank = 1c
M = 1a
7. Enclosure
blank = Flux Proof
H = Wash Tight
8. Suffix
,000 = Standard model
Other
Suffix = Custom model
*Coil voltage: 48VDC only can chose 400mW type.
Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm
Outline Dimensions
(
mm
)
1c*
*1a Outline dimensions is omitted.
Wiring Diagram
(
Bottom
View
)
1c 1a
PC Board Layout (mm) (Bottom View)
1c
1a
Dimensions
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Ordering Information for Relays
Example Part No.
PCH -1 12 D 2 M H ,000
1. Basic Series
PCH = Compact PCB mount type
2. Poles
1 = 1pole
3. Coil Voltage
05 = 5VDC 12= 12VDC
06 = 6VDC 24 = 24VDC
09 = 9VDC 48 = 48VDC*
4. Coil Power
D = 400mW (1a,1c)
L = 200mW (1a)
5. Contact Material
2 = AgSnO
2
6. Contact Arrangement
blank = 1c
M = 1a
7. Enclosure
blank = Flux Proof
H = Wash Tight
8. Suffix
,000 = Standard model
Other
Suffix = Custom model
*Coil voltage: 48VDC only can chose 400mW type.
Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm
Outline Dimensions
(
mm
)
1c*
*1a Outline dimensions is omitted.
Wiring Diagram
(
Bottom
View
)
1c 1a
PC Board Layout (mm) (Bottom View)
1c
1a
PCB layout
Bottom view on solder pins
© Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B
TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445]
This document is subject to change, Please call local TYCO Electronics for the latest version.
Ordering Information for Relays
Example Part No.
PCH -1 12 D 2 M H ,000
1. Basic Series
PCH = Compact PCB mount type
2. Poles
1 = 1pole
3. Coil Voltage
05 = 5VDC 12= 12VDC
06 = 6VDC 24 = 24VDC
09 = 9VDC 48 = 48VDC*
4. Coil Power
D = 400mW (1a,1c)
L = 200mW (1a)
5. Contact Material
2 = AgSnO
2
6. Contact Arrangement
blank = 1c
M = 1a
7. Enclosure
blank = Flux Proof
H = Wash Tight
8. Suffix
,000 = Standard model
Other
Suffix = Custom model
*Coil voltage: 48VDC only can chose 400mW type.
Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm
Outline Dimensions
(
mm
)
1c*
*1a Outline dimensions is omitted.
Wiring Diagram
(
Bottom
View
)
1c 1a
PC Board Layout (mm) (Bottom View)
1c
1a
1 form C (CO) 1 form A (NO)
1 form C (CO)
1 form A (NO)
12-2015, Rev. 1215
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay PCH (Continued)
Product code Coil Sensitivity Cont.material Arrangement Enclosure Insulation Part number
PCH-105D2H,000 5VDC Standard AgSnO2 1 form C (CO) Wash tight Class F 9-1440003-0
PCH-105L2M,000 Sensitive 1 form A (NO) Flux proof 1461352-2
PCH-105L2MH,000 Wash tight 1461353-2
PCH-105L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-2
PCH-106D2,000 6VDC Standard 1 form C (CO) Class F 9-1440003-8
PCH-109D2H,000 9VDC Wash tight 9-1440003-2
PCH-112D2,000 12VDC Flux proof 1440004
PCH-112D2H,000 Wash tight 9-1440003-3
PCH-112D2M,000 1 form A (NO) Flux proof 1461350-5
PCH-112D2M-WG Cl. F, IEC 60335-1 1721767-5
PCH-112D2-WG 1 form C (CO) 1721766-5
PCH-112L2M,000 Sensitive 1 form A (NO) Class F 1461352-5
PCH-112L2MH,000 Wash tight 1461353-5
PCH-112L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-5
PCH-124D2,000 24VDC Standard 1 form C (CO) Class F 1440004-1
PCH-124D2H,000 Wash tight 9-1440003-5
PCH-124D2M,000 1 form A (NO) Flux proof 1461350-6
PCH-124D2MH,000 Wash tight 1461351-6
PCH-124L2M,000 Sensitive Flux proof 1461352-6
PCH-124L2MH,000 Wash tight 1461353-6
PCH-124L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-6
PCH-148D2,000 48VDC Standard 1 form C (CO) Class F 1461410-2
Product code structure Typical product code PCH -1 12 D 2 H ,000
Type
PCH Miniature PCB Relay PCH
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 05=5VDC)
Coil sensitivity
D Standard 400mW L 200mW (for 1 form A contact only)
Contact material
2 AgSnO
Contact arrangement
Blank 1 form C (CO) contact M 1 form A (NO) contact
Category of protection
Blank Flux proof, vented cover H Wash tight, sealed plastic cover
Insulation system designation
Blank Class F system WG Class F system and for domestic appliances (IEC 60335-1, 4 Edition);
Suffix
,000 Standard type
Other types on request
