http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEN 5WI Series, 6 Watt
Features
◆ Ultra wide 4:1 input range
◆ DIP-24 Package with standard pinout
◆ Full SMD design
◆ Extended operating temperature range
–40°C to +85°C max.
◆ High efficiency
◆ Excellent load and line regulation
◆ Indefinite short circuit protection
◆ I/O isolation 1500VDC
◆ Built-in Filter to meet EN 55022, Class A
and FCC, level A
◆ Lead-free design, fully RoHS compliant
◆ 3-year product warranty
The TEN 5WI series is a family of high performance dc-dc converter modules with
5 W output power, featuring ultra wide input voltage ranges of 9 - 36 VDC or
18 - 75 VDC. They come in a shielded DIP-24 metal package with industry-standard
footprint.
A high efficiency allows –40°C to +70°C operation ambient temperatures at full
load. Typical applications for these converters are battery operated equipment and
distributed power architectures in communication, instrumentation and industrial
electronics, everywhere where a wide input voltage range is required.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 5-2410WI 3.3 VDC 1200 mA 75 %
TEN 5-2411WI 5 VDC 1000 mA 78 %
TEN 5-2412WI 12 VDC 500 mA 83 %
TEN 5-2413WI 9 – 36 VDC 15 VDC 400 mA 82 %
TEN 5-2421WI (24 VDC nominal) ±5 VDC ±500 mA 78 %
TEN 5-2422WI ±12 VDC ±250 mA 83 %
TEN 5-2423WI ±15 VDC ±200 mA 82 %
TEN 5-4810WI 3.3 VDC 1200 mA 75 %
TEN 5-4811WI 5 VDC 1000 mA 78 %
TEN 5-4812WI 18 – 75 VDC 12 VDC 500 mA 83 %
TEN 5-4813WI 15 VDC 400 mA 82 %
TEN 5-4821WI (48 VDC nominal) ±5 VDC ±500 mA 78 %
TEN 5-4822WI ±12 VDC ±250 mA 83 %
TEN 5-4823WI ±15 VDC ±200 mA 82 %
Models
UL 60950 -1
C B
Scheme
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEN 5WI Series 6 Watt
Input Specifications
Input current no load 24 Vin models 20 mA typ.
48 Vin models 10 mA typ.
Start-up voltage / 24 Vin models 9 VDC / 8.5 VDC typ.
under voltage shut down 48 Vin models 18 VDC / 16 VDC typ.
Surge voltage (1 sec. max.) 24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ±2.0 % max.
Regulation – Input variation Vin min. to Vin max. ±0.5 % max.
– Load variation 10 – 100 %
single output models 1.0 % max.
dual output models 1.0 % max. balanced load
25 – 100 % 5.0 % max. unbalanced load
Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max
Temperature coefficient ±0.02 %/K
Current limitation >110 % of Iout max., constant current
Short circuit protection indefinite (automatic recovery)
Capacitive load 3.3 / 5 VDC models 470 µF max.
12 / 15 VDC models 100 µF max.
dual output models 100 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +100°C max.
– Storage –40°C to +125°C
Derating 3.5 %/K above +70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF ( M I L- H D B K-217F, at +25°C, ground benign) >800’000 h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 1000 pF typ
Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 450 kHz typ. (Pulse frequency modulation PFM)
Safety standards cUL/UL 60950-1 , IEC/EN 60950-1
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS directive 2011/65/EU
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 5WI Series 6 Watt
Physical Specifications
Casing material black anodized aluminium
Baseplate material non conductive FR4
Potting material epoxy (UL 94V-0 rated)
Weight 17 g (0.49 oz)
Soldering temperature max. 260°C / 10 sec.
Outline Dimensions
Insulated Baseplate
22.86
20.3
4.5
31.8
10.2
4.1
15.24
11
9
22
23 2
3
14
16
Bottom view
2.54
15.24
2.4
5.08
(0.6)
(0.8)
(0.1)
(0.4)
(0.16)
(1.25)
(0.9) (0.18)
(0.1)
(0.2)
(0.6)
Pin Single Dual
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No pin Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 13, 2018
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (±0.02)
Pin pitch tolerances ±0.35 (±0.014)
Supporting documents: www.tracopower.com/overview/ten5wi
