BFR93A/BFR93AR/BFR93AW Vishay Telefunken Silicon NPN Planar RF Transistor Electrostatic sensitive device. Observe precautions for handling. Applications Wide band amplifier up to GHz range. Features D High power gain D High transition frequency D Low noise figure 1 1 13 581 13 581 94 9280 2 9510527 3 3 BFR93A Marking: +R2 Plastic case (SOT 23) 1 = Collector, 2 = Base, 3 = Emitter 2 BFR93AR Marking: +R5 Plastic case (SOT 23) 1 = Collector, 2 = Base, 3 = Emitter 1 13 652 2 13 570 3 BFR93AW Marking: WR2 Plastic case (SOT 323) 1 = Collector, 2 = Base, 3 = Emitter Document Number 85035 Rev. 3, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 1 (9) BFR93A/BFR93AR/BFR93AW Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Total power dissipation Junction temperature Storage temperature range Test Conditions Tamb 60 C Symbol VCBO VCEO VEBO IC Ptot Tj Tstg Value 20 12 2 50 200 150 -65 to +150 Unit V V V mA mW C C Maximum Thermal Resistance Tamb = 25_C, unless otherwise specified Parameter Test Conditions Junction ambient on glass fibre printed board (25 x 20 x 1.5) mm3 plated with 35mm Cu Symbol RthJA Value 450 Unit K/W Electrical DC Characteristics Tamb = 25_C, unless otherwise specified Parameter Test Conditions Collector cut-off current VCE = 20 V, VBE = 0 Collector-base cut-off current VCB = 10 V, IE = 0 Emitter-base cut-off current VEB = 2 V, IC = 0 Collector-emitter breakdown voltage IC = 1 mA, IB = 0 Collector-emitter saturation voltage IC = 50 mA, IB = 5 mA DC forward current transfer ratio VCE = 5 V, IC = 30 mA Symbol Min Typ Max Unit ICES 100 mA ICBO 100 nA IEBO 10 mA V(BR)CEO 12 V VCEsat 0.1 0.4 V hFE 40 90 150 Electrical AC Characteristics Tamb = 25_C, unless otherwise specified Parameter Transition frequency Collector-base capacitance Collector-emitter capacitance Emitter-base capacitance Noise figure Power gain Linear output voltage - two tone intermodulation test Third order intercept point Test Conditions VCE = 5 V, IC = 30 mA, f = 500 MHz VCB = 10 V, f = 1 MHz VCE = 5 V, f = 1 MHz VEB = 0.5 V, f = 1 MHz VCE = 8 V, ZS = 50 W, f = 800 MHz, IC = 5 mA VCE = 8 V, ZS = 50 W, f = 800 MHz, IC = 25 mA VCE = 8 V, IC = 25 mA, ZS = 50 W, ZL = ZLopt, f = 800 MHz VCE = 8 V, IC = 25 mA, dIM = 60 dB, f1 = 806 MHz, f2 = 810 MHz, ZS = ZL = 50 W VCE = 8 V, IC = 25 mA, f = 800 MHz www.vishay.de * FaxBack +1-408-970-5600 2 (9) Symbol fT Ccb Cce Ceb F Min Typ 6 0.45 0.2 1.5 1.6 Max Unit GHz pF pF pF dB F 2.1 dB Gpe 14 dB V1 = V2 260 mV IP3 31 dBm Document Number 85035 Rev. 3, 20-Jan-99 BFR93A/BFR93AR/BFR93AW Vishay Telefunken Common Emitter S-Parameters Z0 = 50 W, Tamb = 25_C, unless otherwise specified S11 VCE/V IC/mA 5 8 10 15 Document Number 85035 Rev. 3, 20-Jan-99 f/MHz 100 300 500 800 1000 1200 1500 1800 2000 100 300 500 800 1000 1200 1500 1800 2000 100 300 500 800 1000 1200 1500 1800 2000 LIN MAG 0.811 0.530 0.370 0.274 0.256 0.255 0.277 0.294 0.312 0.676 0.377 0.259 0.197 0.189 0.195 0.222 0.245 0.263 0.597 0.306 0.219 0.172 0.165 0.174 0.201 0.226 0.245 S21 ANG deg -33.9 -83.4 -116.3 -149.7 -165.5 -178.6 162.7 146.0 136.2 -44.9 -97.1 -131.0 -164.2 -178.0 169.8 155.6 140.0 131.3 -52.0 -105.2 -139.3 -172.8 174.6 164.9 152.9 137.5 128.5 LIN MAG 12.66 8.32 5.67 3.77 3.11 2.67 2.21 1.91 1.76 19.22 10.24 6.59 4.26 3.48 2.98 2.46 2.12 1.95 22.81 10.94 6.91 4.45 3.62 3.09 2.54 2.19 2.01 S12 ANG deg 152.2 117.3 99.8 85.0 77.8 71.1 62.1 54.0 49.4 142.3 108.0 93.8 81.6 75.4 69.5 61.4 54.1 49.9 136.3 103.8 91.3 80.0 74.3 68.8 61.0 53.9 49.7 LIN MAG 0.028 0.058 0.075 0.099 0.117 0.135 0.163 0.194 0.215 0.025 0.050 0.071 0.102 0.124 0.147 0.179 0.212 0.235 0.023 0.047 0.070 0.104 0.128 0.151 0.185 0.219 0.243 S22 ANG deg 72.8 57.8 56.7 59.8 61.8 62.6 63.3 63.3 62.7 69.9 62.8 64.8 66.9 67.2 66.7 65.4 63.6 62.0 69.3 66.5 68.4 69.5 69.0 68.1 66.0 63.8 61.8 LIN MAG 0.914 0.661 0.537 0.487 0.485 0.481 0.466 0.455 0.454 0.832 0.539 0.441 0.415 0.423 0.424 0.409 0.398 0.397 0.774 0.484 0.405 0.390 0.401 0.403 0.388 0.377 0.375 ANG deg -15.0 -27.4 -26.9 -23.8 -24.2 -26.8 -31.3 -35.0 -38.4 -21.0 -29.0 -25.0 -20.4 -21.1 -24.2 -29.0 -32.6 -36.2 -23.9 -28.5 -23.3 -18.3 -19.4 -22.7 -27.8 -31.4 -35.3 www.vishay.de * FaxBack +1-408-970-5600 3 (9) BFR93A/BFR93AR/BFR93AW Vishay Telefunken S11 VCE/V IC/mA 20 8 25 f/MHz 100 300 500 800 1000 1200 1500 1800 2000 100 300 500 800 1000 1200 1500 1800 2000 LIN MAG 0.540 0.274 0.199 0.164 0.160 0.166 0.197 0.223 0.242 0.502 0.254 0.191 0.162 0.158 0.163 0.200 0.220 0.243 www.vishay.de * FaxBack +1-408-970-5600 4 (9) S21 ANG deg -56.8 -110.3 -144.7 -177.3 171.1 162.3 151.6 135.8 128.2 -61.1 -114.6 -148.9 178.0 167.6 159.3 149.0 134.7 128.4 LIN MAG 24.86 11.22 7.03 4.49 3.66 3.13 2.58 2.21 2.04 26.06 11.32 7.05 4.51 3.66 3.13 2.57 2.21 2.04 S12 ANG deg 132.3 101.5 89.8 79.2 73.5 68.2 60.5 53.7 49.5 129.3 99.8 88.8 78.5 73.0 67.6 60.1 53.2 48.9 LIN MAG 0.022 0.046 0.070 0.105 0.130 0.153 0.188 0.222 0.246 0.021 0.045 0.070 0.106 0.131 0.154 0.190 0.224 0.248 S22 LIN MAG ANG deg 68.6 68.6 70.5 70.9 70.1 68.6 66.2 63.8 61.8 68.7 69.6 71.5 71.5 70.5 69.0 66.4 63.8 61.7 0.732 0.455 0.387 0.380 0.391 0.393 0.378 0.367 0.365 0.702 0.438 0.378 0.374 0.387 0.389 0.374 0.364 0.361 ANG deg -25.5 -27.6 -21.9 -16.9 -18.2 -21.8 -27.1 -30.9 -34.7 -26.4 -26.5 -20.6 -16.0 -17.5 -21.2 -26.6 -30.5 -34.4 Document Number 85035 Rev. 3, 20-Jan-99 BFR93A/BFR93AR/BFR93AW Vishay Telefunken Typical Characteristics (Tamb = 25_C unless otherwise specified) C cb - Collector Base Capacitance ( pF ) P tot - Total Power Dissipation ( mW ) 300 250 200 150 100 50 0 0 20 40 60 80 0.6 0.4 0.2 f=1MHz 0 0 6000 3.0 F - Noise Figure ( dB ) 3.5 5000 4000 3000 2000 VCE=5V f=500MHz 12 16 20 2.5 2.0 1.5 1.0 VCE=8V f=800MHz ZS=50W 0.5 0 0 0 13590 8 Figure 3. Collector Base Capacitance vs. Collector Base Voltage 7000 1000 4 VCB - Collector Base Voltage ( V ) 13591 Figure 1. Total Power Dissipation vs. Ambient Temperature f T - Transition Frequency ( MHz ) 0.8 100 120 140 160 Tamb - Ambient Temperature ( C ) 96 12159 1.0 8 16 24 32 40 IC - Collector Current ( mA ) Figure 2. Transition Frequency vs. Collector Current Document Number 85035 Rev. 3, 20-Jan-99 0 12897 5 10 15 20 25 30 IC - Collector Current ( mA ) Figure 4. Noise Figure vs. Collector Current www.vishay.de * FaxBack +1-408-970-5600 5 (9) BFR93A/BFR93AR/BFR93AW Vishay Telefunken VCE = 8 V, IC = 25 mA , Z0 = 50 W S12 S11 j 2.0 GHz 90 120 j0.5 1.5 j2 60 1.0 150 j0.2 30 j5 AAA AAAAAA AAA AAAAAA 0.5 2.0 GHz 0 1.0 0.2 1 2 1 5 0.1 180 0.08 0.16 0 0.3 -j0.2 -j5 0.1 -150 -j0.5 -30 -j2 -120 -j 13 534 -60 -90 13 535 Figure 5. Input reflection coefficient Figure 7. Reverse transmission coefficient S21 S22 j 90 120 60 j0.5 150 j2 30 0.1 j0.2 0.3 180 2.0 GHz 20 40 0 0 j5 AAAA AA AA AAAA AA AA 0.2 0.5 1 0.8 2.0 GHz 0.1 -j0.2 -150 -j5 -30 -j0.5 -120 13 536 1 5 -j2 -60 -90 Figure 6. Forward transmission coefficient www.vishay.de * FaxBack +1-408-970-5600 6 (9) 13 537 -j Figure 8. Output reflection coefficient Document Number 85035 Rev. 3, 20-Jan-99 BFR93A/BFR93AR/BFR93AW Vishay Telefunken Dimensions of BFR93A in mm 95 11346 Dimensions of BFR93AR in mm 95 11347 Document Number 85035 Rev. 3, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 7 (9) BFR93A/BFR93AR/BFR93AW Vishay Telefunken Dimensions of BFR93AW in mm 96 12236 www.vishay.de * FaxBack +1-408-970-5600 8 (9) Document Number 85035 Rev. 3, 20-Jan-99 BFR93A/BFR93AR/BFR93AW Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 85035 Rev. 3, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 9 (9)