SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
76mm (3.0INCH) SINGLE DIGIT DISPL AY
Part Number: SA30-21YWA Yellow
Features
z3.0 inch digit height.
zLow current operation.
zExcellent character appearance.
zEasy mounting on P.C. boards or sockets.
zCategorized for luminous intensity.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (mcd) [1]
@ 10mA Description
Min. Typ.
SA30-21YWA Yellow (GaAsP/GaP) White Diffused
14 30
*5.6 *12
Common Anode ,
Rt.Hand Decimal.
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Yellow 588 nm IF=20mA
Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage
Per segment or(Dp and Comma) Yellow 12.6
(4.2)
15.0
(5.0) V IF=20mA
IR Reverse Current
Per segment or(Dp and Comma) Yellow 10
(10) uA VR = 5V
Parameter Yellow Units
Power dissipation
Per segment or(Dp and Comma) 450(150) mW
DC Forward Current
Per segment or(Dp and Comma) 30(30) mA
Peak Forward Current [1]
Per segment or(Dp and Comma) 140(140) mA
Reverse Voltage
Per segment or(Dp and Comma) 5(5) V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
Yellow SA30-21YWA
Y
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
PACKING & LABEL SPECIFICATIONS SA30-21YWA
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
SPEC NO: DSAM8238 REV NO: V.1A DATE: JAN/12/2013 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003364
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes